Scribd
Upload
10 views1 page

Carboguard 60: Selection & Specification Data

Carboguard 60 is a high solids epoxy polyamide coating that offers abrasion, chemical, and corrosion resistance, suitable for use as a primer, intermediate coat, or self-priming finish. It features low VOC, fast cure times, and can be applied over various surfaces, including zinc-rich primers. Optional additives are available to enhance performance for severe applications, and it is compliant with current regulations.

Uploaded by

Longtomahawk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views1 page

Carboguard 60: Selection & Specification Data

Carboguard 60 is a high solids epoxy polyamide coating that offers abrasion, chemical, and corrosion resistance, suitable for use as a primer, intermediate coat, or self-priming finish. It features low VOC, fast cure times, and can be applied over various surfaces, including zinc-rich primers. Optional additives are available to enhance performance for severe applications, and it is compliant with current regulations.

Uploaded by

Longtomahawk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

®

Carboguard 60
PRODUCT DATA SHEET

S E L E C T I O N & S P E C I F I C AT I O N D ATA
Generic Type Epoxy Polyamide

Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion
resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or
inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish
coats. This product has excellent wetting properties giving it the capability of going over marginally
Description prepared substrates. It is ideal for maintenance and fabrication shop applications. An optional
Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and
may be used to enhance film strength for more abusive applications for severe marine or heavy
industrial uses.
Consult Technical Service for suitability as a lining or other exposures.

• Laboratory qualified for multiple ISO 12944 atmospheric-corrosivity categories


• Low odor and low VOC
• Available in a variety of rapid tint colors*
• Attractive medium sheen for tank exteriors
• Good chemical resistance
Features • Used as a primer, intermediate, or finish coat
• Fast cure & dry times
• Can be applied over power tool cleaned surfaces
• VOC compliant to current AIM regulations
• Good abrasion resistance
• Approved MPI #108

Standard colors include: C705 (Light Grey) and S800 (White)


Color A wide range of colors is available upon request using Carboline’s Rapid Tint System (RTS).
Contact your Carboline representative for RTS color availability.

Finish Semi-Gloss

Self-priming. May be applied over organic and inorganic zinc rich primers. A mist coat may be
Primer
required to minimize bubbling over zinc rich primers.

4 - 6 mils (102 - 152 microns) per coat as a primer or an intermediate without additives
4 - 10 mils (102 - 254 microns) per coat (2 coats) may be used direct-to-metal
Dry Film Thickness 8 - 12 mils (203 - 305 microns) per coat with GF or MiO additives

Do not exceed 10 mils in a single coat (without additives)

Solids Content By Volume 72% +/- 2%

1155 ft²/gal at 1.0 mils (28.3 m²/l at 25 microns)


Theoretical Coverage 289 ft²/gal at 4.0 mils (7.1 m²/l at 100 microns)
Rate 96 ft²/gal at 12.0 mils (2.4 m²/l at 300 microns)
Allow for loss in mixing and application.

January 2024 1045 Page 1 of 5

You might also like