CATALOGUE

2020
G310R, GS
F650/F700/F800GS (08-)
F750/850GS
F650, CS, GS, ST & Dakar
F800S, ST & GT | F800R
K1200LT | K1200RS & GT
K1200R & R Sport | K1200S & GT (06-)
K1300S, K1300R, K1300GT
K1600GT & GTL
R850/1100/1150GS & Adventure
R850/1100/1150R & Rockster
R850/1200C & CL
R1100/1150RT & RS | R1100S
RnineT & R1200R, RT, S, ST & RS
R1200GS, Adv., HP2 & Megamoto
R1250GS, RT, R & RS
S1000R, S1000RR, S1000XR
FOREWORD

2
Design: Tobias Hornig, Christina Huber, Helmut Hornig, Michael Silberbauer, Hedwig Hornig

Foreword
© 2020 Motorradzubehör Hornig GmbH - All rights reserved!

As usual you will find the most popular products for many
BMW motorcycles in our 2020 catalogue.

This catalogue was printed in January 2020 in order to de-

liver it to you at the start of the motorcycle season 2020.
This catalogue already contains many products for the new
BMW Motorrad models R1250GS, R1250RT, R1250R and
R1250RS.

This catalogue contains our best-sellers - you can of course

find our complete and up-to-date product range in our on-
line shop:
www.mhornig.com

www.mhornig.com 3
4
Index

F 650, 700, 800 GS (2008-*). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6

F 650, CS, GS, ST, DAKAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
F 800 S, ST & GT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
F 800 R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32
F 750 GS & F 850 GS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 44
G 310 GS & G 310 R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 52
K 1200 RS , GT & LT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 60
K 1200 R, R Sport & K 1300 R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 74
K 1200 S & K 1300 S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 90
K 1200 GT & K 1300 GT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 108
K 1600 GT & GTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 118
R 850 - 1100 - 1150 GS & ADVENTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 124
R 850 - 1100- 1150 R & ROCKSTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 140
R 850 - 1200 C & CL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 158
R 1100 RT & R 1150 RT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 170
R 1100 S, R 1100 RS & R 1150 RS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 184
R 1200 GS, ADVENTURE, HP2 & MEGAMOTO . . . . . . . . . . . . . . . . . . . . . . . . . . page 200
R 1200 GS LC 2013-* & R 1200 GS ADV. LC 2014-* & R 1250 GS. . . . . . . . . . . page 228
R 1200 R (2005 - 2014) & RnineT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 248
R 1200 R LC (2015 - ), R 1250 R & R 1200 RS, R 1250 RS. . . . . . . . . . . . . . . . . .page 268
R 1200 RT (2005-2013). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 278
R 1200 RT LC (2014-) & R 1250 RT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 292
R 1200 S, HP2 SPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 304
R 1200 ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 320
S 1000 RR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 330
S 1000 R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 342
S 1000 XR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 352
Navigation & Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 360
Accessories, Spare and war parts, Footpeg lowering, Tools . . . . . . . . . . . . . . . . . . page 366
Cases, topcases and attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 396
Soft Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 400
Clothes and stickers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 408
Location plan & The Arber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 410
Seat Alteration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 412
How to order online? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 414
Payment methods and shipping costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 416
Order form and GTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 418

www.mhornig.com 5
F 650 - 700 - 800 GS

F650GS, F700GS F800GS

built since 2008, 2012 built since 2008
798 ccm cylinder capacity 798 ccm cylinder capacity
power:71 PS, 75 PS power:85 PS
max. torque 75 Nm, 77 Nm max. torque 83 Nm at 5.750/min

6
 GPS Mounting with Plate
You will tighten the basic screw (thread M8) to your handlebar mounting. Then you will screw the movable GPS moun-
ting plate to it. Garmin and TomTom motorcycle GPS units can be mounted without any problems. However, you can
also adjust the plastic plate very easily for other devices. For BMW F700GS.

ArtNo. Description Price

NH 1-12 GPS Mounting with Plate € 79,95

Adjustable Gear Lever

The GS is designed for sporty off-road use and that is
exactly where we‘d like to see it.
The experience from numerous races has shown that the
engine guard of the GS could use a number of improve-
ments to be suited for rough competition use.
For this reason we offer a sturdy engine guard which,
thanks to its stronger material and slightly wider form,
protects the alternator, clutch and water pump connec-
tion far better than the original one.

ArtNo. Description Price

FSC.07.558.10000 Adjustable € 129,95
Gear Lever

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the rear mirrors. The mirrors
will be moved some centimeters away from each other
which creates the necessary space in order to improve
the view to the back.

ArtNo. Description Price

BK 02 Mirror extensions € 49,95
1 set (M10)

www.mhornig.com 7
F 650 - 700 - 800 GS

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and doesnt give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized. Just slip it on and lock in place with a set-
screw. Length: circa 5,8cm, Diameter: circa 3,0cm.

ArtNo. Description Price

0391 Shift lever extension € 25,90

Brake pedal enlargement

This special part is made of extremely handy aluminium
and guarantees a safe braking. It gets mounted with two
screws, u-screws, nuts and tubes which are all supplied.
For all BMW F800GS, F700GS & F650GS from 2008 - *.

ArtNo. Description Price

0128 Brake pedal enlargement € 20,90

Handlebar height riser 20mm

Those who like to go offroad and do so frequently will
find the 20 mm handlebar height increase indispensable.
It makes it much easier to ride while standing. It also
facilitates a more pleasant, relaxed position while sitting
and significantly increases the touring comfort.
It just takes moments to fit. Delivery includes screws and
EG/ABE street homologation.

ArtNo. Description Price

048-0150 Handlebar height riser € 37,90
20mm

Rear Mudguard
This shapely rear hugger is made of glass-fibre reinforced
plastic or carbon fibre and ensures that your legs, the
suspension and the rear part of your
BMW F650GS, F700GS & F800GS will stay dry and
clean. Does not fit for lowered bikes.

ArtNo. Description Price

40100 GRP black primed € 189,00

8
 Sidestand foot enlargement
Feel safer when parking your bike on dirt or asphalt
with a sidestand foot enlargement. More than 100%
bigger contact area. Made of high-quality aluminium.
Black anodized. Easy to install.
Does not fit for lowered bikes and not for F800GS
Adventure.
ArtNo. Description Price
0708 Sidestand foot enlargement € 24,95
F800GS
0717 Sidestand foot enlargement € 24,50
F700GS, F650GS 2008-*

Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your BMW F650GS, F700GS &
F800GS 2008-2012. The crash bars are designed to
be very robust and allow an equal distribution of the
forces so that you and your bike are protected in the best
possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle. 1 set left and right.

ArtNo. Description Price

TN690 Crash bars black € 140,90

Crash bars
Our crash bars are made of high-quality stainless steel
and are especially designed for your F650/700/800GS.
The crash bars are designed to be very robust and allow
for an equal distribution of forces in a crash. You and your
bike are protected in the best possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle.

ArtNo. Description Price

SBL.07.556.10100 Crash bars € 249,95
silver

Main Stand F650GS (08-) & F700GS low

This main stand is characterized by its accuracy of fit and
its stability. It is very instrumental in any little work you
have to do on your bike just like changing the brake pads
and so on.
Fits only for the lowered version of BMW F650GS (08-)
& F700GS!

ArtNo. Description Price

HPS.07.201.10000/B Main Stand € 159,95

www.mhornig.com 9
F 650 - 700 - 800 GS
Lifter
Our front lifter fits for BMW F650GS twin, F700GS, all
F800 and G650X bikes. It is especially made for the
lowered F650GS twin. It is perfect for care, overwintering,
changing wheels and servicing. Made of steel, zinc-plated
and quality „Made in Germany“.

ArtNo. Description Price

Lifter010 F650GS, F700GS € 84,90
LifterG650Xch F800GS € 95,90

LED turning signals F650GS & F800GS

Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a
homologation. So it is the first road legal LED for BMW
bikes! The LEDs flash yellow. Not compatible with BMW
LED turning signals. Sold in pairs (for left and right). Not
for F700GS!
ArtNo. Description Price
01006 1 pair of LED turning € 84,95
signals with clear lenses
01006-g 1 pair of LED turning € 84,95
signals with grey lenses

Indicator lens F650GS & F800GS

Indicator lenses. Sold in a set (2 pieces).
If you want, the lenses can also be sold as single items.
With E-Mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.
Too long screws will break the lense!
ArtNo. Description Price
CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses).
Single.
BLWB-CBUS
ArtNo. Description Price
BLWB-CBUS orange coated bulb € 2,80
12V/10W
BLWBT-CBUS special coated bulb € 5,99
BLWBT-CBUS 12V/10W

10
 Touring windshield F700GS
For long distance rides PUIG introduces the touring series
to minimize the windblast against the rider. These screens
raise the windblast for several centimeters, allowing the
rider to keep a more comfortable position while riding
the motorcycle. 22cm higher than the original windshield.
Incl. homologation.

ArtNo. Description Price

6365W clear € 119,00
6365H smoked grey € 119,00

Windscreen
Lots of riders want more wind protection, because the
original windscreen is extremely sporty in its design.This
windscreen is much bigger and has a different aerodyna-
mic shape. Turbulences around the helmet are minimised
and protection against bad weather is improved.
For installation on a F700GS, you need a special holder.

ArtNo. Description Price

01-048-0370-0 Windscreen clear € 133,90
01-048-0372-0 Windscreen tinted € 129,90
8531603 Holder for F700GS € 65,90

V-Stream Windscreen
The advanced ‚V‘ shape and dimensional contours push
the wind vortex out and away from the riders‘ helmet, re-
sulting in a peaceful, quiet environment. This improvement
is notable for the passenger as well. This windshield is 3x
more resistant to abrasion than acrylic materials and has
superior crack and impact resistance. Covered by 3-YEAR
UNBREAKABLE WARRANTY! Not for F700GS! For article
number 115112, Z2435A and Z2434A you will also need
mirror extenders (Z5301 / BK 02).

ArtNo. Description Price

115112 Clear, H 50,5cm, W 42,9cm € 229,95
Z2435A Clear, H 45,1cm, W 40cm € 209,00
Z2434A Clear, H 37,1cm, W 35,5cm € 179,00
Z2432 Dark tint, H 30,5, W 33,6cm € 169,00

www.mhornig.com 11
F 650 - 700 - 800 GS

ArtNo. Description Price

01-048-5651-0 Set Hand Protectors € 99,90
F700GS
01-040-6681-0 Set Hand Protectors € 99,90
F800GS *-2012
01-048-5661-0 Set Hand Protectors € 99,90
F800GS 2013-*

Hand Protectors
The hand protector offers optimum protection against wind and weather. A very strong, sturdy construction which has
proved itself again and again in many rallies and on other motorcycles.
- Vibration isolation maintained (100%)
- For use in conjunction with heated grips
- Includes special adapters for fitting

Wolo Very Loud Horn

This horn with its 115 db ensures that you get the neces-
sary respect and that you will not be overlooked.
The horn is perfect for motorcycles because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU.

Horn: 12V 6A (non-stop operation), height 7,5cm;

diameter 8,5cm.

ArtNo. Description Price

TM80BMW Wolo Very Loud Horn € 69,90
and wiring

Remus Hexacone
More than 1kg lighter compared to the original exhaust.
Not only nice for the eyes but also powerful sound - the
HexaCone.
For Euro 4!
BMW F700GS (09/2016 - *)
BMW F800GS (09/2016 - *)
BMW F800GS Adventure (09/2016 - *)

ArtNo. Description Price

0964782 HexaCone Black Hawk € 636,00
085317 (black)
094882 HexaCone Titanium € 683,00
085317

12
 You must send
your seat
to us!

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 13
F 650, CS, GS, ST, DAKAR

F650 Funduro, ST,GS,Dakar,CS

built since 1993 (Funduro)
652 ccm cylinder capacity
power:48/50 PS
max. torque 57/60/62 (CS) Nm

14
 GPS Mounting for BMW F650, F650CS,
F650GS ( -2007), F650ST
You screw the GPS ball into the upper triple clamp. The
screw is 55/60/65mm long with a M8 thread. Attention:
If handlebar risers are mounted, these screws are possib-
ly too short. You can mount many different GPS mounts to
it, for example RAM mounts.

ArtNo. Description Price

NH 1-10 GPS Mounting € 24,95

Key holder with emblem

Useful key holder made of knurled aluminium, polished
on top, with our emblem. Just slot in the „emergency
key“ and fix it with a set-screw.
Article 0076 : Also possible to hook in a carabineer.

ArtNo. Description Price

0075 polished without eye € 21,90
0076 polished with eye € 29,95

How do you sit on your motorcycle seat?

Do you want to change something?

Then read through the pages of the catalog

SEAT ALTERATION.
We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 15
F 650, CS, GS, ST, DAKAR
Crash bars F650CS Scarver bikes
Our crash bars are made of high-quality steel and are es-
pecially designed for your F650CS 2002 model or newer.
The crash bars are designed to be very robust and allow
for an equal distribution of forces in a crash. You and your
bike are protected in the best possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle.

ArtNo. Description Price

SBL.07.211.100/S Crash bars silver € 159,95

Side stand foot enlargement F650GS 00-07

Feel safer when parking your bike on dirt or asphalt with
a sidestand foot enlargement. More than 100% bigger
contact area. Made of high-quality aluminium.
Black anodized. Easy to install.

Does not fit for the lowered version of the F650GS!

ArtNo. Description Price

0721 Sidestand foot enlargement € 23,90
70033 Extra Screws € 3,95

Brake Pedal Extension F650CS

Nicely machined aluminium, knurled and clear anodized.
It has a slot on its lower side which you tighten with a cal-
liper and it will stay perfect in place. You can also secure
the brake pedal extension using some silicone. Length:
circa 5,5cm, Diameter: circa 2,4cm

ArtNo. Description Price

0180 anodized € 24,50

Mirror Extensions
F650CS, GS & Dakar 00-07
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the rear mirrors. The mirrors
will be moved some centimeters away from each other
which creates the necessary space in order to improve
the view to the back.
ArtNo. Description Price
BK 12 Mirror extensions € 49,95
1 set (M8)

16
 Dash pad
Dash pad with carbon fibre effect.
Protects this very visible part of your bike from your keys
and enhances its appearance with this scratch-resistant,
self-adhesive pad.
No more cutting required, fits exactly.
Fits F 650 & F 650 ST.

ArtNo. Description Price

80075 Dash pad € 7,90

Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly. Made of tough ABS plastic the
extender attaches to the original fender with expanding
rivets which are of course included.

ArtNo. Description Price

054215 F650GS 2002-2007 € 29,95
05409 F650ST € 29,95
05404 F650 € 29,95
05413 F650CS 2002-2003 € 29,95

www.mhornig.com 17
F 650, CS, GS, ST, DAKAR

Kickstand F650CS
For BMW Scarver F 650 CS - also with low suspension.
Perfectly suitable for removing the wheels.
Saves tyres in winter.
Very easy to store because of its removable bar end.

ArtNo. Description Price

scarver08 Kickstand € 79,90

Clear taillight lens F650 ST/GS/Dakar

White rear light with long-life LEDs. Super optics, quick
installation and with E-mark.
The LED rear light gives your motorcycle an entirely new
appearance. You do not need to worry anymore that the
lamp in the rear light could be broken, which would make
you an accident risk.

ArtNo. Description Price

TT.044-0395 Clear taillight lens + LED € 69,90

Handlebar screw cover F650 & F650ST

An optical improvement for your bar risers and is made
of aluminium.
An integrated o-ring ensures a snug fit.
For F 650 & F 650 ST

ArtNo. Description Price

0266 anodized € 13,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses).
Single.
BLWB-CBUS
ArtNo. Description Price
BLWB-CBUS orange coated bulb € 2,80
12V/10W
BLWBT-CBUS special coated bulb € 5,99
BLWBT-CBUS 12V/10W

18
 Taillight lens F650CS
Clear or black taillight lens for a brilliant look.
Fits for your BMW F650CS.

ArtNo. Description Price

WL-53 Clear taillight lens € 44,90
WL-53-S Black taillight lens € 46,90
12V21/5Rot Red bulb for rear- and € 3,50
brake light 12V/21/5Watt

LED Taillight F650CS

Complete taillight with integrated LED-board for simple
exchange! Road legal.
For bikes with and without ABS (Int. ABS).
Fits for BMW F650CS.

ArtNo. Description Price

WLL-53-L clear LED Taillight € 99,90

Brake pedal enlarger

F650GS & F650GS Dakar 2000-2007
This special part is made of an extremly handy aluminium
and cares for safe braking. It gets mounted with two
screws, u-screws, nut and hulls which are all yet with the
enlargement.

ArtNo. Description Price

0140 polished € 20,90
0140-1 anodized € 22,60

Shift lever extension

F650GS & F650GS Dakar 2000-2007
Many BMW riders think that their shift lever is a little too
thin and doesnt give enough grip when theyre shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized. Just slip it on and lock in place with a set-
screw. Length: circa 5,8cm, Diameter: circa 3,0cm

ArtNo. Description Price

0391 natural anodized € 25,90

www.mhornig.com 19
F 650, CS, GS, ST, DAKAR

Windscreen F650 94-96

Our windscreen for your F650 1994-1996 model is
characterised by high quality and a perfect fit. The wind-
screen will be shipped with an edge protection (black).
Smokey grey.
HxW: 460x423 mm.

ArtNo. Description Price

D230SG Windscreen € 107,10
F650 94-96 model

Windscreen tinted
Our windscreen for your F650GS 2000-2003 model has
an especially designed spoiler and is characterised by
high quality and a perfect fit.
Wind screen with edge protection (black).
HxW: 411x340 mm.

ArtNo. Description Price

D234SG Windscreen € 127,00
F650GS 00-03 model

Windscreen
Our windscreen for your F650GS 2004-2007 model has
an especially designed spoiler and is characterised by
high quality and a perfect fit. Cannot be installed together
with the hand protection kit.
Windscreen will be shipped with an edge protection
(black). HxW: 395x440 mm.

ArtNo. Description Price

D331STG Windscreen € 100,00
F650GS 04-07 model

20
 Originally-shaped screen
This windscreen has the same shape as the original one.
For F 650 / F 650 ST, 97-00 models.
Available in clear or smoke grey, length: 430mm.
Doesn’t fit for motorcycle with hand guards and Strada
handlebar!

ArtNo. Description Price

4025066595228 Smoke grey € 74,90
4025066595211 Clear € 74,90

Spoiler screen
All windscreens are produced and tailored precisely.
For F 650 / F 650 ST, 97-00 models.
Available in clear or smoke grey, length: 305mm.
Doesn’t fit for motorcycle with hand guards and Strada
handlebar!

ArtNo. Description Price

4025066595372 Smoke grey € 84,90
4025066595365 Clear € 84,90

Touring Screen
All windscreens are produced and tailored precisely.
The shape of the touring screen is similar to the original
screen, but it is higher and wider.
For F 650 / F 650 ST, 97-00 models.
Available in clear or smoke grey, length: 460mm. Doesn’t
fit for motorcycle with hand guards and Strada handle-
bar!
ArtNo. Description Price
T-f650-rg Smoke grey € 84,90
T-f650-K Clear € 84,90

www.mhornig.com 21
F 800 S, ST & GT

F800S, ST & GT
built since 2006
798 ccm cylinder capacity
power: 85 PS
max. torque 86 Nm at 5.800/min

22
 GPS Mounting with Plate F800ST & F800GT
You will tighten the basic screw (thread M8) to your handlebar mounting. Then you will screw the movable GPS moun-
ting plate to it. Garmin and TomTom motorcycle GPS units can be mounted without any problems. However, you can
also adjust the plastic plate very easily for other devices.

ArtNo. Description Price

NH 1-12 GPS Mounting with Plate € 79,95

GPS Mounting with Plate F800S

This aluminium plug fits for BMW handlebars with an inner diameter of 15-19mm. Just insert the CNC-machined plug
in the open part of the handlebar (usually closed with a plastic plug). The plug will stay in place thanks to an alumi-
nium expansion fastener. Garmin and TomTom Motorcycle GPS units can be mounted without any problems. However,
you can also adjust the plastic plate very easily for other devices.
ArtNo. Description Price
NH 3/7sw GPS Mounting with Plate € 74,90

www.mhornig.com 23
F 800 S, ST & GT
Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly.
Made of tough ABS plastic the extender attaches to the
original fender with expanding rivets which are of course
included.

ArtNo. Description Price

054200 Extenda Fender € 29,95

Crash Protector F800ST

These crash protectors offer the best possible protection
if a crash was not avoidable. The brand new compound
plastic can absorb forces of a crash without braking. But
these crash protectors are not only very usable but also
good looking. The crash protectors are for left and right
side and you can mount them quite fast and easy. They
come with a special holder so no drilling or cutting the
fairing is necessary.
ArtNo. Description Price
eq703 Crash Protector € 128,80

Stainless steel end weight F800S & F800ST

These end weights are made of stainless steel and
create a more noble look for your bike and lead to less
vibrations. Included in delivery are two S/S end weights
and two S/S countersunk screws for fixing.
Stainless steel: each 200 grams

ArtNo. Description Price

05382 Bar-end weights polished € 39,90

Superbike handlebars F800GT

These handlebars create a new sporty look and improve
the handling of your BMW F800GT. The handlebar is black
anodized and fits to any colour of your F800GT.
65mm higher, 40mm closer and 30mm wider. Fits for all
BMW F800GT with ABS!
Everything you need to install the handlebar is included.

ArtNo. Description Price

S50801340406 Superbike handlebars € 239,00

24
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt
with a sidestand foot enlargement. More than 100%
bigger contact area. Made of high-quality aluminium.
Black anodized. Easy to install.

ArtNo. Description Price

0722 Sidestand foot enlargement € 27,90

Handlebar Risers 25mm

Raising the handlebar by 25mm results in a more upright,
much more relaxed seating position. This considerably
improves driving comfort. The overall result is a noticeable
increase in stamina and concentration. The length of
the brake line etc. must be checked individually. Maybe
you have to use a longer brake line etc. With EU street
homologation! BMW F800ST (2006-2012)
ArtNo. Description Price
23554 Handlebar risers 25mm € 49,90

Handlebar Risers with Offset

Raising the handlebar by 30mm results in a more
upright, much more relaxed seating position. Moreover,
the handlebar is brought 21mm closer to the rider which
additionally improves driving comfort. The overall result is
a noticeable increase in stamina and concentration.
The length of the brake line etc. must be checked indi-
vidually. Maybe you have to use a longer brake line etc.
With EU street homologation!
BMW F800ST (2006-2012)
ArtNo. Description Price
24896 Handlebar risers with Offset € 69,95

www.mhornig.com 25
F 800 S, ST & GT
Superbike Handlebar F800S
Sporty riding without carrying their whole weight on
their lower arms is the dream of many riders. To meet
this wish a Superbike handlebar conversion has been
developed which, with its tapered handlebars and full
black anodizing, not only looks sophisticated, but also
ensures sporting performance with very little strain on the
rider. The Superbike handlebar conversion includes all
components that are necessary for fitting.
Fits for all BMW F800S with ABS!

ArtNo. Description Price

50800640406 Superbike Handlebar € 429,00

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors. The mirrors will
be moved 5cm outwards in order to improve the view to
the rear. 1 set.

ArtNo. Description Price

BK 08 F800S & F800ST € 59,95
BKB 01 F800GT € 59,95

Brake pedal enlargement

This brake pedal enlargement is nicely machined of
aluminium, knurled and anodized. It is quite simple to in-
stall - just slip it on and lock in place with two set-screws.
Length: circa 5,7cm, Diameter: circa 2,6cm.

ArtNo. Description Price

0182 Brake pedal enlargement € 24,90

Fork Crash Protectors

These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.
ArtNo. Description Price
FP100 Fork Crash Protectors € 64,90

26
 LED turning signals
Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a homo-
logation which makes it the first road legal LED for BMW
bikes! The LEDs flash yellow. Sold in pairs (for left and
right). Not compatible with BMW LED turning signals.

ArtNo. Description Price

01006 1 pair of LED turning € 89,95
signals with clear lenses
01006-g 1 pair of LED turning € 89,95
signals with grey lenses

Clear indicator lens

Clear indicator lenses. Sold in a set (2 pieces).
However, you can also order a single lens.
With E-Mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.

ArtNo. Description Price

CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses).
Single.
ArtNo. Description Price BLWB-CBUS
BLWB-CBUS orange coated bulb € 2,80
12V/10W
BLWBT-CBUS special coated bulb € 5,99
12V/10W BLWBT-CBUS

Clear taillight lens

White rear light with long-life LEDs. Super optics, quick
installation and with E-mark . Especially adapted to the
electrics of the F800S & ST.
The LED rear light gives your motorcycle an entirely new
appearance. You do not need to worry anymore that the
lamp in the rear light could be broken, which would make
you an accident risk.

ArtNo. Description Price

TT.044-0395 Clear taillight lens + LED € 69,90

www.mhornig.com 27
F 800 S, ST & GT
ABS resin mud guard F800GT
This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider!
Everything you need for installation is included.
With ABE (European homologation).

ArtNo. Description Price

6447J ABS resin mud guard € 129,00

Rear Hugger
Made of carbon fibre and provides ultimate protection for
the rear shock absorber!
Spend less time for cleaning and more for riding!
BMW F800S, ST & GT.

ArtNo. Description Price

KHO.001.F800S.K Rear Hugger € 299,90

Engine Spoiler short

This bellypan is made of high-quality fibre-glass rein-
forced synthetic material (GRP) or carbon fibre and is
especially designed to give your BMW F800R a sporty
look. Easy to install, can be used with the centre stand.
Incl. all fasteners and an install instruction. The GRP
version is black primed.
BMW F800S & F800ST.

ArtNo. Description Price

40155 GRP Engine Spoiler € 219,00
40155-1 Carbon Engine Spoiler € 339,00

Tank Centre Panel

This cover for the middle part of the tank is made of
carbon fibre which looks very sporty on your BMW F800S,
ST & R. Quite resistant to scratches etc.
Fits for BMW F800S & ST.

ArtNo. Description Price

TAO.002.F800S.K Tank Centre Panel € 319,90

28
 Handlebar height riser 20 mm
This handlebar riser for your BMW F800GT lets you sit up
straighter and be more comfortable on longer rides. You‘ll
notice a definite decrease in the stress on your wrists
and shoulders. Your trip will be safer; you‘ll arrive more
relaxed. It takes just moments to fit. Delivery includes
screws. With EG/ABE street homologation. For F800GT.

ArtNo. Description Price

048-0150 Handlebar height riser € 37,90
20mm

Dash pad F800GT

Carbon look - protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80074 Dash pad for F800GT € 10,30

Oil temperature gauge

The temperature of the cooling water is usually different
to the temperature of the engine oil! The oil temperature
gauge helps you to warm up your bike easier!

ArtNo. Description Price

10034208 Model year -2007 € 64,95
10034213 Model year 2008- € 64,95

Dash pad F800S

Carbon look - protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80076 Dash pad for F800S € 10,70

www.mhornig.com 29
F 800 S, ST & GT

Wolo Very Loud Horn

This horn with its 115 db ensures that you get the necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small and easy to install. Because of its E-approval mark it is street
legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm; diameter 8,5cm.
ArtNo. Description Price
TM80BMW Horn and wiring BMW F800S & ST € 69,90
WOLO-BMW Horn and wiring with relay BMW F800GT € 79,90

You must send

your seat
to us!

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

30
 High Windscreen F800S & F800ST
Transparent and aerodynamic wind protection with a
spoiler as air deflector and an edge protection (black).
17cm higher compared to the F800S screen and
7cm higher compared to the F800ST screen.
Size (HxB): 450 x 320 mm.

ArtNo. Description Price

D332STG High windscreen clear € 108,50

Touring screen F800S & F800ST

The touring screen has the same shape as the original
screen (like F800S). 345mm high, with an additional
upwardly tilted airfoil over its entire width to deflect wind
pressure away from the rider, ensuring an easy, relaxing
ride, even on long trips. BMW F800S & ST.

ArtNo. Description Price

t-f800-rg Smoke grey € 84,90
t-f800-k Clear € 84,90

V-Stream Windscreen F800S & ST

Revolutionizes windscreen performance! The advanced ‚V‘
shape and dimensional contours push the wind vortex out
and away from the riders‘ helmet, resulting in a peaceful,
quiet environment. This improvement is notable for the
passenger as well. Tough FMR coated polycarbonate gives
VStream windshields outstanding clarity and strength
characteristics unmatched by any windshield maker
worldwide. BMW F800S & ST.
ArtNo. Description Price
115105 Windscreen, design high € 189,90
h49 cm, w43 cm

V-Stream Windscreen F800GT

VStream Windscreens are 30X more scratch resistant
and have 20X greater crack and impact resistance than
other aftermarket windscreens on the market made from
commonly used acrylic or „aircraft plastic“.
4.5mm FMR Hardcoated Polycarbonate.

ArtNo. Description Price

Z2476 dark, H38,7 cm, W45,7 cm € 229,00
Z2477 clear, H46,3 cm, W48,3 cm € 229,00
Z2478 clear, H54 cm, W48,3 cm € 239,95

www.mhornig.com 31
F 800 R

F800R
built since 2006
798 ccm cylinder Capacity,
power: 87 PS (64 KW)
max. torque 86 Nm
acceleration 0-100kmh: 3,9 Sec.
top speed: over 200 kmh
weight: 199 kg

32
Our F800R customisation

We have developed and designed some Maybe the most useful item we developed
items for your F800R like our windscreens for the BMW F800R is the rear hugger,
which offer much more protection from wind although it is not that visible. It will be
and rain, but still look very sporty. mounted with the original chain guard and
protects you and your pillion rider from dirt
We thought that the oil cooler is too visible and spread water just like your bike, the
so we designed a bigger oil cooler cover. exhaust, the collector and much more.

Moreover, we developed a small engine

spoiler which can be used in combination
with the centre stand.

www.mhornig.com 33
F 800 R

V-Stream Windshield 2006 - 2014

The V-Stream windshield sets new standards for design, technology and comfort. Made of Quantum/Lexan Polycarbo-
nate which is 10x more scratch-resistant than usual Acrylic. The windscreen will be shipped with everything you need
to mount it. Windshield V-Stream, with homologation and mounting. Only fits with original indicators!

ArtNo. Description Price

Z2424 Clear, Height 40,7cm, Width 38cm € 369,00
Z2425 Light tint, Height 40,7cm, Width 38cm € 379,00
Z2426 Clear, Height 48cm, width 43cm € 379,00

Sport windshield F800R 2015 -

For sporty rides PUIG introduces the sport series to have
regular and constant air flow around and towards the
helmet. This will reduce turbulences and give you a more
sporty feeling. Height x Width: 315x290mm.

ArtNo. Description Price

7650H light tinted € 83,50
7650F dark tinted € 89,50
7650N black € 83,50

Fork Crash Protectors

These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.
ArtNo. Description Price
FP100 Crash Protectors (-2014) € 62,90
FP102 Crash Protectors (2015-) € 68,90

34
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Brake pedal enlargement

This brake pedal enlargement is nicely machined of
aluminium, knurled and anodized. It is quite simple to in-
stall - just slip it on and lock in place with two set-screws.
Length: circa 5,7cm, Diameter: circa 2,6cm.

ArtNo. Description Price

0182 Brake pedal enlargement € 24,90

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt
with a sidestand foot enlargement. More than 100%
bigger contact area. Made of high-quality aluminium.
Black anodized. Easy to install.

ArtNo. Description Price

0722 Sidestand foot enlargement € 27,90
70033 Extra screws € 3,95

www.mhornig.com 35
F 800 R

Cooler protection F800R 2015-

Perfect protection for your cooler which looks nice and is
made of high-quality aluminum.
The lattice is surrounded by a solid frame and keeps
insects or dirt away from the cooler.
Cooler protection, scratch protection and fitting instruc-
tions are included.

ArtNo. Description Price

Kg-F8R15 Cooler protection € 84,90

Extenda Fender F800R 2015-

The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly.
Made of tough ABS plastic the extender attaches to the
original fender with expanding rivets which are of course
included.

ArtNo. Description Price

054232 Extenda Fender € 29,95

36
 Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your BMW F800R. The crash
ars are designed to be very robust and allow an equal
distribution of the forces so that you and your bike are
protected in the best possible way.
You can download the installation instructions
via our online shop: www.mhornig.com
ArtNo. Description Price
TN691 Crash bars € 103,00

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors. The mirrors will
be moved a few centimetres outwards in order to improve
the view to the rear.

ArtNo. Description Price

BK 02 Mirror extensions € 49,95
1 set (M10)

Remus HexaCone
More than 1kg lighter compared to the original exhaust.
Not only nice for the eyes, but also a powerful sound - the
HexaCone. Available in titanium or stainless steel black
(Black Hawk). With homologation. For Euro 4!
BMW F800R (09/2016-*)

ArtNo. Description Price

0964782 085217 Remus Black Hawk € 636,00
094882 085217 Remus HexaCone € 683,00
Titanium

Puig Rear Mudguard

To keep clean your undertail, nothing works better than
rear huggers. PUIG rear huggers, offered in black, are deli-
vered with hardware and a very easy to follow instruction.
Paintable material that will perfectly fit your bike.
Approval TÜV 31060 (homologation), street legal.

ArtNo. Description Price

0703 Rear Mudguard black € 129,00

www.mhornig.com 37
F 800 R
Magura - Hymec - hydraulic clutch
F800R 2009-2015
The HYMEC for BMW is simply a fantastic hydraulic retrofit
clutch system that is guaranteed to improve overall bike
performance. BMW riders can now get away with applying
a lot less pressure than with the standard clutch. Depen-
ding on riding style, this can make for huge benefits in
terms of riding comfort and control. The master cylinder
control naturally has reach adjustment. Technical profile
in brief:
pre-mounted forged lever with improved lever ergonomics,
filled and delivered ready to install
easy to install, detailed instructions included
retrofittable for BMW F800 models
filled with non-toxic MAGURA Blood

The benefits are clear:

less energy required
fine response
finely tuned metering capability
no fluctuation in the pressure point
automatic compensation of break pad wear
maintenance free
first class workmanship “Made in Germany”
ArtNo. Description Price
2100021 hydraulic clutch € 359,00

Dash pad F800R 2006-2014

Carbon look. Protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80072 Dash pad € 9,90

38
 LED turning signals F800R 2006-2014
Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a homo-
logation which makes it the first road legal LED for BMW
bikes! The LEDs flash yellow. Sold in pairs (for left and
right). Not compatible with BMW LED turning signals.

ArtNo. Description Price

01006 1 pair of LED turning € 84,95
signals with clear lenses
01006-g 1 pair of LED turning € 84,95
signals with grey lenses

Indicator lens
Indicator lenses. Sold in a set (2 pieces).
However, you can also order single pieces if you want.
With E-Mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.

ArtNo. Description Price

CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses).
Single BLWB-CBUS
ArtNo. Description Price
BLWB-CBUS orange coated bulb € 2,80
12V/10W
BLWBT-CBUS special coated bulb € 5,99
12V/10W BLWBT-CBUS

Clear taillight lens

White rear light with long-life LEDs. Super optics, quick
installation and with E-mark . Especially adapted to the
electrics of the F800R.
The LED rear light gives your motorcycle an entirely new
appearance. You do not need to worry anymore that the
lamp in the rear light may be broken, which would make
you an accident risk.

ArtNo. Description Price

TT.044-0395 Clear taillight lens + LED € 69,90

www.mhornig.com 39
F 800 R
Engine Spoiler Tank Centre Panel
This bellypan is made of high-quality fibre-glass rein- This cover for the middle part of the tank is made of
forced synthetic material (GRP) or carbon fibre. Easy carbon fibre which looks very sporty on your BMW F800R.
to install, can be used with the centre stand. Incl. all Quite resistant to scratches etc.
fasteners and install instruction. The GRP version is black.
primed. ArtNo. Description Price
ArtNo. Description Price TAO.002.F800S.K Tank Centre Panel € 319,90
40155 GRP Engine Spoiler € 219,00
40155-1 Carbon Engine Spoiler € 339,00

ArtNo. TAO.002.F800S.K
Tank Centre Panel

ArtNo. 40155/40155-1
GPR/Carbon Engine Spoiler

40
 GPR Rear Mudguard
This shapely rear hugger is made of glass-fibre reinforced
plastic (GRP) or carbon fibre and ensures that your legs,
the suspension and the rear part of your BMW F800R will
stay dry and clean.
The glass-fibre version is black primed.

ArtNo. Description Price

40150 GPR Rear Mudguard € 179,00

e
You can find mor ents Carbon Rear Hugger
PR at ta ch m
Carbon/G rnig.com Provides ultimate protection for the rear shock absorber!
online: w w w.mho Spend less time for cleaning and more for riding!
ArtNo. Description Price
KHO.002.F800R.K Carbon rear € 299,90
hugger

ArtNo. 40150 GPR Rear

Mudguard

ArtNo. KHO.002.F800R.K
Carbon Rear Hugger

www.mhornig.com 41
F 800 R

Handlebar Risers for BMW F800R (2015 - )

Handlebars rise by 25 mm
- For an upright and relaxed riding position
- Less strain on shoulders and wrists
- For sport bikes: Better standing, less exhaustive riding
- Better handling
- Silver anodized
- EG/ABE street homologation

ArtNo. Description Price

30099 Handlebar Risers € 75,90

How do you sit on your motorcycle seat?

Do you want to change something?

Then read through the pages of the catalog

SEAT ALTERATION.
We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

42
Weißblaue Geschichten
in den BMW-Sonderausgaben Erscheint
viermal pro
Jahr, immer zum
Quartalsende:
die MO-Sonder-
ausgabe „BMW
Motorräder“.
Weißblaue
Geschichten
über die
neueste Technik,
Youngtimer,
Klassiker, sowie
die Menschen
hinter den
Maschinen

Ein Sonderheft von

Im guten Zeitschriftenhandel
oder einfach direkt beim Verlag bestellen:
online unter www.mo-web.de
oder per E-Mail: bestellservice@mo-web.de
Telefon (0711) 24 89 76-24, Fax 24 89 76-28
Heftpreis 7,90 Euro, Versand kostenfrei www.mo-web.de
 F 750 GS, F 850 GS & F 850 GS ADVENTURE

F750GS F850GS

built since 2018 built since 2018

853 ccm capacity 853 ccm capacity
Power: 77 HP (57 KW) Power: 95 HP (70 KW)
Maximum torque 83 Nm Maximum torque 92 Nm

44 Source: BMW Motorrad Press

 Stainless steel end weight
These end weights are made of stainless steel and create
a noble look for your bike. Included are two stainless steel
end weights.
Stainless steel:178 grams each
Original aluminium: 65 grams each

ArtNo. Description Price

0808 Stainless steel end weights € 36,90

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear.

ArtNo. Description Price

BK02LC 1 set mirror extensions € 49,95

Fork Crash Protectors

These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium. These crash protectors provide
additional protection for your fork. Shipment includes the
crash protectors (left and right) and the mounting.

ArtNo. Description Price

FP102 Fork crash pads € 68,90

Side stand foot enlargement

Feel safer parking your bike on dirt or asphalt with a side
stand foot enlargement. More than 100% bigger contact
area. Made of high-quality aluminium.
Black anodized. Easy to install. Doesn‘t fit for the lowered
version of the F750GS & F850GS & Adventure!

ArtNo. Description Price

0734 Side stand foot € 25,90
enlargement

www.mhornig.com 45
F 750 GS, F 850 GS & F 850 GS ADVENTURE
Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and doesnt give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized. Just slip it on and lock in place with a set-
screw. Length: circa 5,8cm, Diameter: circa 3,0cm.

ArtNo. Description Price

0391 Shift lever extension € 25,90

Brake pedal enlargement

This special part is made of an extremly handy aluminium
and makes for safe braking. It gets mounted with two
screws, u-screws, nut and tubes which are all supplied.

ArtNo. Description Price

0129 Brake pedal € 21,50
enlargement

Frame Covers
These covers are made of anodized aluminium and cover
the holes of the frame. The covers are available in black
anodized. Kept firmly in place by an o-ring.
Shipping includes 1 set (2 pieces) of covers.

ArtNo. Description Price

0201 Set Frame Covers € 20,90
black anodized

Oil Filler Plug

This Oil Filler Plug is made of high quality aluminum
and available in two colours: black anodized and silver
anodized. You can open this Oil Filler Plug with a Torx T45.
The oil filler plug and the dipstick are milled of one piece
aluminium.

ArtNo. Description Price

0028 silver anodized € 33,80
0228 black anodized € 34,90

46
 Handlebar Risers with Offset
Raising the handlebar results in a more upright, much
more relaxed seating position. Moreover, the handlebar
is brought closer to the rider which additionally improves
driving comfort. The handlebar riser also makes riding
while standing less tiring, which is of tremendous benefit
to taller riders in particular. The overall result is a noticea-
ble increase in stamina and concentration.
ArtNo. Description Price
26875 F750GS 30/22mm € 99,90
26876 F850GS & Adv. 30/25mm € 99,90

Crash bars
Our crashbars are made of high-quality steel and are
special designed for your BMW F750GS / F850GS. The
crashbars are designed to be very robust and allow for an
equal distribution of forces in a crash. You and your bike
are protected in the best possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle.

ArtNo. Description Price

SBL.07.897.10000/B Crash bars € 199,95
black

Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your BMW F750GS & F850GS.
The crash bars are designed to be very robust and allow
for an equal distribution of forces in a crash. You and your
bike are protected in the best possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle.
50165130001 & 50265130001: black coated steel
50165130022 & 50265130022: stainless steel

ArtNo. Description Price

50165130022 Set crash bars € 259,95
stainless steel
50165130001 Set crash bars black € 204,95
50265130022 Set fairing crash € 249,95
bars, stainless steel
50265130001 Set fairing crash € 189,95
bars, black

www.mhornig.com 47
F 750 GS, F 850 GS & F 850 GS ADVENTURE

Carbon Fiber Tankpad

Zips or buttons can scratch your tank very easily, because
of this we make tank pads out of the latest 3M Carbon
Fiber foil. These pads have a real carbon look with a tex-
tured feel. The foil is also very scratch-resistant, UV-stable
and it has an amazing 3D finish. You can glue it on very
easy and bubble-free and it is car wash and weather-
resistant. Bottom 8,5cm x top 11cm x length 7,3cm

ArtNo. Description Price

S1XR Carbon Fiber € 11,90
Tankpad

Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly. Made of tough ABS plastic the
extender attaches to the original fender with expanding
rivets which are of course included.

ArtNo. Description Price

054246 Extenda Fender F750GS € 29,95
054247 Extenda Fender F850GS € 29,95

Frame end caps

These covers are made of black plastic material and
cover the holes of the frame. Shipping includes 1 set (2
pieces) of covers. For F850GS Adventure, only the rear
cap is visible!

ArtNo. Description Price

089404 Set Frame Covers € 15,90
black

GPS Mounting with Plate

You will tighten the basic screw (thread M8) to your
handlebar mounting. Then you will screw the movable GPS
mounting plate to it. Garmin and TomTom motorcycle GPS
units can be mounted without any problems. However,
you can also adjust the plastic plate very easily for other
devices.

ArtNo. Description Price

NH 1-12 GPS support € 79,95

48
GPS Mount
Our new GPS mounting for BMW
F750GS/F850GS positions your GPS
device directly above the instruments.
You always see your GPS without looking
away from the street. No vibrations!

In order to mount BMW Navigators, you

need part number 44016 / 44017.

For Garmin SPIII, SP26**, 2720,

Zumo 550, Zumo 590, Zumo 595,
Zumo 660 & Nüvi you also need part
number 44004. GPS SP26** & 2720
owners will need to purchase the Garmin
motorcycle mount (016799 or 016869).

For TomTom GPS systems, please order part number 44004 and our special adapter (tomt-Ad Ed 2).

ATTENTION: There are also F750GS models with windhsields of the F850GS on the market. In this case, the GPS
support 44017 for F750GS does not fit (different hole distances) and you have to use the GPS support for F850GS
(44016).

ArtNr. Beschreibung Preis

44017 GPS Mount F750GS € 54,90
44016 GPS Mount F850GS € 57,90
44004 GPS Mounting for Garmin devices € 39,90
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, € 15,90
410, 420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the
TomTom holder.
Zumo-Ad This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo (not for ZUMO € 11,60
340, 345, 350, 390 and 395). With this adapter the GPS is 12mm closer to you
and it can be dislocated 7,5mm or 15mm higher or lower as usual. You need this
option for the Zumo’s bus bar.
Made of black Pom incl. all screws.
ram-1zoll Adapter for 1” RAM ball € 34,90

44016 /
44004
44017

www.mhornig.com 49
F 750 GS, F 850 GS & F 850 GS ADVENTURE
Upper deflectors
These upper deflectors for BMW BMW F750GS & F850GS
models improve the driving comfort thanks to their shape
and position by deflecting the air flow away from the
rider‘s torso and legs. Because of their special shape, the
deflectors merge harmoniously into the overall design of
the motorcycle and are characterized by subtle design,
high quality and an easy mounting process.
Shipment includes a set for the left and right side.

ArtNo. Description Price

9847W clear € 105,90
9847H light tinted € 105,90
9847F dark tinted € 105,90

Touring windshield
For long distance rides the Touring series was developped to minimize the windblast against the rider. These screens
raise the windblast for several centimeters, allowing the rider to keep a more comfortable position riding the
motorcycle. 530 x 412mm.
F750GS: 295mm higher than the original screen.
F850GS: 210mm higher than the original screen.

ATTENTION: There are also F750GS models with windhsields of the F850GS on the market. In this case, the Touring
screen for F750GS does not fit (different hole distances) and you have to use the Touring screen for F850GS.

ArtNo. Description Price

9770W clear F750GS € 109,90
9770H light tinted F750GS € 109,90
9770F dark tinted F750GS € 109,90
9759W clear F850GS € 105,90
9759H light tinted F850GS € 105,90
9759F dark tinted F850GS € 105,90

50
 Remus Hexacone Black Hawk
More than 1kg lighter compared to
the original exhaust. Not only nice for
the eyes, but also a powerful sound -
the HexaCone.
Available in stainless steel black
(Black Hawk).
With homologation.
For Euro 4!

ArtNo. Description Price

0564782085518 Remus Black Hawk (Stainless Steel Black) € 668,00

Remus 8
More than 0.5 kg lighter compared to
the original exhaust. Not only nice for
the eyes, but also a powerful sound -
the new Remus 8.
Available in stainless steel or stain-
less steel black.
With homologation.
For Euro 4!

ArtNr. Beschreibung Preis

0584682085518 Remus 8 Stainless Steel € 703,00
0584782085518 Remus 8 Stainless Steel Black € 739,00

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 51
 G 310 GS & G 310 R

G310R G310GS

built since 2016 built since 2017

313 ccm capacity 313 ccm capacity
Power: 34 HP (25 KW) Power: 34 HP (25 KW)
Maximum torque 28 Nm Maximum torque 28 Nm

52
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Side stand foot enlargement G310R

Feel safer parking your bike on dirt or asphalt with a side
stand foot enlargement. More than 100% bigger contact
area. Made of high-quality aluminium. Black anodized.
Easy to install.

ArtNo. Description Price

0730 Side stand foot enlarge- € 23,80
ment G310R

Side stand foot enlargement G310GS

Feel safer parking your bike on dirt or asphalt with a side
stand foot enlargement. More than 100% bigger contact
area. Made of high-quality aluminium. Black anodized.
Easy to install.

ArtNo. Description Price

0732 Side stand foot enlarge- € 23,90
ment G310GS

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors. The mirrors will
be moved a few centimetres outwards in order to improve
the view to the rear.

ArtNo. Description Price

BK02-2 1 Set Mirror Extensions € 49,90

www.mhornig.com 53
G 310 GS & G 310 R
Oil Filler Plug
This oil filler plug is made of high-quality aluminium
and available in two colours: black anodized or silver
anodized. You can open this oil filler plug
with a Torx T45.

ArtNo. Description Price

0025 black anodized € 20,50
0024 silver anodized € 20,60

Brake pedal enlargement G310R

This special part is made of an extremly handy aluminium
and cares for safe braking. It gets mounted with two
screws, u-screws and nuts which are all yet with the
enlargement.
For all BMW G310R bikes.

ArtNo. Description Price

0127 Aluminium € 17,90

Brake pedal enlargement G310GS

This special part is made of an extremly handy aluminium
and cares for safe braking. It gets mounted with two
screws, u-screws and nuts which are all yet with the
enlargement.
For all BMW G310GS bikes.

ArtNo. Description Price

0145 Aluminium € 18,90

Rear Swingarm Crash Protectors

These crash protectors for the rear swingarm are made of
cnc lathed plastic (POM). The mounting is made of cnc
milled and anodized aluminum.
These crash protectors provide additional protection for
your motorcycle. Shipment includes the crash protectors
(left and right) and the mounting.

ArtNo. Description Price

FP103 Crash Protectors Rear € 68,90
Swingarm

54
 Fork Crash Protectors
These crash protectors for the fork are made of cnc
lathed nylon. These crash protectors provide additional
protection for your motorcycle. Shipment includes the
crash protectors (left and right).

ArtNo. Description Price

20036N Fork Crash Protectors € 54,90

Crash bars
Our crashbars are made of high-quality steel and are
special designed for your BMW G310R. The crashbars
are designed to be very robust and allow for an equal
distribution of forces in a crash. You and your bike are
protected in the best possible way. Crashbars offer a very
good protection but they can reduce the cornering angle.

ArtNo. Description Price

SBL.07.649.10000/B Crash bars € 159,95

Crash bars G310R

These crash bars are always the best choice - whether
you ride offroad, on the highway or in urban areas. Your
motorcycle is effectively protected against damages due
to unexpected fall-downs at all times. The crash bars
which are made of a robust pipe-in-pipe construction fit
perfectly to the design of the bike and give your motorcy-
cle a unique look. Crash bars offer a very good protection,
but they can reduce the cornering angle.

ArtNo. Description Price

50165010001 Crash bars € 164,95

Crash bars G310GS

These crash bars are always the best choice - whether
you ride offroad, on the highway or in urban areas. Your
motorcycle is effectively protected against damages
due to unexpected fall-downs at all times. Attention: The
fairing crash bars can only be mounted in combination
with the engine crash bars!

ArtNo. Description Price

50165070001 Engine crash bars € 164,95
50265070001 Fairing crash bars € 164,95

www.mhornig.com 55
G 310 GS & G 310 R
Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly. Made of tough ABS plastic the
extender attaches to the original fender with expanding
rivets which are of course included.

ArtNo. Description Price

054242 Extenda Fender G310R € 29,95
054244 Extenda Fender G310GS € 29,95

Hand Protectors
A very good protection against the wind and weather. Our
hand protectors protecting your hands against windchill
and wet conditions. Easy to fit, you‘ll never want to be
without your protectors again! Autumn and spring riding
becomes a pleasure when your hands are warm. There‘s
a safety benefit, too, since having cold hands is a dis-
traction while riding and affects your concentration span.
Made of ABS plastics, with sticker set.

ArtNo. Description Price

9881J Hand Protectors black € 149,90

Tail / Rear Seat Bag

Designed to fit perfectly on the rack or rear seat and with
the feature of expansion to allow even more capacity!
There is space for more than just the rain gear here -
expands from 1 litres up to 3.5 litres.Waterproof material,
reflective strips, attractive grey and black colour scheme
and the chord helps you to carry the bag.
Dimensions: approx. 19x22x11cm
ArtNo. Description Price
STBMW3 Tail / Rear Seat Bag € 42,90
ZXS319 Rain Protection Cover € 8,95

GPS Mounting with Plate

You will tighten the basic screw (thread M8) to your
handlebar mounting. Then you will screw the movable
GPS mounting plate to it. Garmin and TomTom motor-
cycle GPS units can be mounted without any problems.
However, you can also adjust the plastic plate very easily
for other devices.

ArtNo. Description Price

NH 1-12 GPS Mounting with Plate € 79,95

56
 Sport windshield G310R
For sporty rides, the Sport series was developped to have
regular and constant air flow around and towards the
helmet. This will reduce turbulences and give you a more
sporty feeling. The Sport screen is 160 mm higher than
the original windscreen of the BMW G310R.

ArtNo. Description Price

8920W Clear € 104,90
8920F Smoke grey € 104,90
8920N Black € 104,90

Racing screen G310R

Our Naked Bike Racing Screen for BMW G310R motorcy-
cles fits perfectly to this agile, easy-to-use and lightweight
Roadster. The screen mounts onto two angle brackets on
the handlebar clamp (mounting hardware kit included).
Height: 320 mm, Width: 320 mm

ArtNo. Description Price

4025066156726 Clear € 102,90
4025066156733 Smoke grey € 102,90
4025066156740 Black € 102,90

Touring windshield G310GS

For long distance rides the Touring series was developped
to minimize the windblast against the rider. These screens
raise the windblast for several centimeters, allowing the
rider to keep a more comfortable position riding the
motorcycle. 180mm higher than the original windscreen.
ArtNo. Description Price
9879W Clear € 89,90
9879H light tinted € 89,90
9879F dark tinted € 89,90
9879N black € 89,90

Vario Touring windshield G310GS

This touring screen has a spoiler at the top of the airfoil;
the spoiler‘s angle can be adjusted. The air current de-
flected behind the spoiler reduces the otherwise annoying
turbulence.

ArtNo. Description Price

9880H light tinted € 135,90

www.mhornig.com 57
G 310 GS & G 310 R

ZTechnik Windscreen G310GS

ZTechnik® revolutionizes windscreen performance! The advanced ‚V‘ shape and dimensional contours push the wind
vortex out and away from the rider‘s helmet, resulting in a peaceful, quiet environment This improvement is notable
for the passenger as well.
VStream windshields are made from tough FMR hardcoated polycarbonate. This high quality material, along with
state-of-the-art manufacturing techniques, provides these windscreens with outstanding clarity and strength cha-
racteristics unmatched by any windscreen maker worldwide. Optically, the VStream windscreen is clear with virtually
no distortion (unlike the hallucinogenic views you get from the stock screen).
VStream Windscreens are 30X more scratch resistant and have 20X greater crack and impact resistance than other
aftermarket windscreens on the market made from commonly used acrylic or „aircraft plastic“.
4.5mm FMR Hardcoated Polycarbonate.
ArtNo. Description Price
Z2360 dark tinted, Height 36,1 cm, Width 33,6 cm € 149,95
Z2361 light tint, Height 42,8 cm, Width 35,5 cm € 159,95
Z2362 clear, Height 49,2 cm, Width 37,4 cm € 169,95

Cover brake fluid reservoir

Cover for the brake fluid reservoir. Honed from top grade
aluminium this cover will give a unique look to your new
BMW.

ArtNo. Description Price

9612P Cover brake fluid € 24,90
reservoir silver
9612N Cover brake fluid € 24,90
reservoir black

58
 Main Stand G310GS
This main stand is characterised by its accuracy of fit and
stability. It is very very simple to fit on your bike - just like
changing the brake pads and so on.

ArtNo. Description Price

50565070001 Main Stand € 179,95

Tinted indicator lenses

These tinted indicator lenses have the same shape and
function as the original lenses and will simply be moun-
ted to the original mounting. Fits for all G310R / G310GS
motorcycle models which do not have LED turning signals
at the front and at the rear! Shipping includes 2 indica-
tor lenses and yellow bulbs.
ArtNo. Description Price
30-1015 Tinted indicator € 21,90
lenses

www.mhornig.com 59
K 1200 RS & K 1200 GT & K 1200 LT

K1200 RS & GT
built from 1997 to 2004/from 2002 to 2005
1171 ccm cylinder capacity
power: 98/130 PS
max. torque 117 Nm

60
 K1200LT
built 1998-2009
1171 ccm cylinder capacity
power: 116 PS
max. torque 119 Nm

www.mhornig.com 61
K 1200 RS & K 1200 GT & K 1200 LT

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. BMW
K1200RS/GT/LT.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-Ring (4 pieces) € 2,80

Foot brake fluid reservoir cover K1200RS

Cover for the foot brake fluid reservoir, CNC-machined of
aluminium.
Image shows K1200R, but it is also visible on K1200RS
without Int. ABS.

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

Swing arm pivot cover K1200RS & GT

Good looking dirt-protection.
We sell the swing arm pivot covers in a set.
The footpegs must be mounted in low position.

ArtNo. Description Price

0445 1 set anodized € 43,80

62
 Mirror Extensions K1200RS & GT
Our mirror extensions are the perfect solutions if you
mainly see your elbows in the mirrors. The mirrors will be
moved 25 mm upwards to improve the view to the rear.
Fits only the mirror you can see on the picture.

ArtNo. Description Price

BK 06 Mirror extensions € 59,95
1 set

Extenda Fender K1200RS & GT

The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly. Made of tough ABS plastic the
extender attaches to the original fender with expanding
rivets which are of course included.

ArtNo. Description Price

05416 Extenda fender € 31,90

www.mhornig.com 63
K 1200 RS & K 1200 GT & K 1200 LT

Paralever pivot cap

Effective prevention of dirt is guaranteed by this paralever
pivot cap.
Highest quality and a perfect look in anodized aluminium.
BMW K1200RS/GT/LT.

ArtNo. Description Price

0070 anodized € 13,90

Frame cover
Nice covers for the frame of all BMW K1200RS, K1200GT
and K1200LT. Delivered as a set. Available in anodized
aluminium. BMW K1200RS/GT/LT.

ArtNo. Description Price

0450 1 set anodized € 22,90

Sidestand foot enlargement K1200RS & GT

Feel safer when parking your bike on dirt or asphalt with
a sidestand foot enlargement. More than 100% bigger
contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.
ArtNo. Description Price
0714 Sidestand foot enlargement € 30,80
70033 Extra screws € 3,95

Oil cooler protection K1200RS & GT

Perfect protection for your oil cooler. Looks quite nice and
is made of high-quality aluminium. The lattice is formed
in a special way to be very robust and it keeps little
insects or dirt off the oil cooler.
Install instructions and scratch protection are included.
Fits for K1200RS MY 2001-* and K1200GT *-2005.

ArtNo. Description Price

0604 Oil cooler protection € 30,90
s10ml Silicone 10ml € 0,95

64
 GPS Mounting K1200RS & GT
Fast, easy mounting is possible with our new GPS mount
for BMW K1200RS & GT 2001-2005.
The windscreen can still be used in all positions and you
can always read your GPS without looking away
from the street.

No vibrations!

For all BMW Navigators and Garmin SPIII & SP26**,

2720, Zumo 550, Zumo 590, Zumo 595, Zumo 660 and
Nüvi series.
SP26** & 2720 owners need the Garmin motorcycle
mount.

Colour: anodized silver.

Zumo-Ad

tomt-Ad Ed 2

ArtNo. Description Price

44003 GPS Mounting € 91,90
Zumo-Ad This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo. With this € 11,60
adapter the GPS gets 12mm closer to you and it can be moved 7,5mm or
15mm up or down. You need this option for the Zumo’s bus bar.
Made of black Pom incl. all screws.
ZumoAd340-350 Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom € 15,90
400, 410, 420, 450, 500 & 550, Incl. screws for mounting in the GPS mount
and the TomTom holder.
ram-1zoll Adapter for 1” RAM-ball € 34,90

You can find the latest products and bargains

online: www.mhornig.com

www.mhornig.com 65
K 1200 RS & K 1200 GT & K 1200 LT
Hardware kit
These stainless and polished screws look great and re-
main like that for years. Complete kit including the screws
and all instructions needed.
ArtNo. Description Price
70040 K1200RS until 2000 model € 18,70
(32 piece)
70045 K1200RS & GT from 2001 € 19,50
model (44 piece)
0421005 transp.shim Ø 5,3mm € 0,17
0421006 transp.shim Ø 6,4mm € 0,15

Chrome cap I
The chrome caps for the gear oil filler screw are an optical
improvement for your BMW.
You simply push them on. The caps fit into the gear oil
filler screw with Allen head and will fit any other screws
with the same Allen size. BMW K1200RS/GT/LT.

ArtNo. Description Price

0500 Big chrome caps € 4,50
0501 Small chrome caps € 4,20

Chrome cap II
Chrome cap II was created for covering the
gear oil filler screw.
Like chrome cap I it is just pushed on and fits perfectly.
BMW K1200RS/GT/LT.

ArtNo. Description Price

0502 Chrome cap II € 4,40

Chrome cap V K1200RS & GT

The chrome cap V for the speedometer adjustment is an
optical improvement for your BMW.
You simply stick it on e.g. with Uhu or silicone.
If you have no silicone at home you can also order our
high-quality silicone which is pre-filled in the volume you
need and easy to dose.

ArtNo. Description Price

0508 Chrome cap V € 1,95
s2ml Silicone 2ml € 0,75

66
 S/S screws
Brake fluid reservoir & clutch reservoir
get a new look with these 4x S/S screws
70070: For all (elderly) bikes with a hydraulic brake
and no hydraulic clutch
70075: For all (newer) bikes with a hydraulic brake
and a hydraulic clutch
BMW K1200RS/GT/LT.
ArtNo. Description Price
70070 4 x M5x16 € 3,95
70075 4 x M4x16 € 3,95

Clear lens + LED K1200RS & GT

Far brighter than the standard set-up!
Fitted in seconds by anyone.
Features red high-intensity LEDs.

ArtNo. Description Price

40106-01 Without Integral ABS € 84,95
40106-02 With integral ABS € 89,95
(Let us know: with or
without cruise control?)

www.mhornig.com 67
K 1200 RS & K 1200 GT & K 1200 LT
Tector brake and clutch lever
K1200LT (2004-2008) & K1200RS
The CNC milled Tector levers fascinate by their high
functionality and their elegant design - for maximum
driving pleasure! TÜV approved, comes with vehicle type
approval, six-way adjustable for the gap to the handlebar,
adjustable lever length (for 2 to 4 fingers), fixed fold-
function (only in the event of a crash)
ArtNo. Description Price
HT-LR3-LR3-titan titanium-black € 179,95
HT-LR3-LR3-schwarz black-black € 179,95
HT-LR3-LR3-rot red-black € 179,95
HT-LR3-LR3-blau blue-black € 179,95

Clear indicator lens front

Clear indicator lens for the front of your K1200RS & GT.
For the left and right with orange bulbs.
Fits the 2001 model or newer.

ArtNo. Description Price

7 672 159 left € 48,90
7 672 160 right € 48,90

Indicator lens K1200RS & GT

These indicator lenses give your BMW
a quite sporty look.
Supplied as pairs, but if you want, also as single items.
Amber bulbs included!

ArtNo. Description Price

L30103 1 set Clear indicator lens € 25,80
L30103-g 1 set Grey indicator lens € 25,90

LED turning signal K1200RS & GT

Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate.
It is a complete turning signal and has a homologation
which makes it the first road legal LED for BMW bikes!
The LEDs flash yellow. Sold in pairs.
ArtNo. Description Price
0917 1 pair with clear lenses € 84,95
0917-g 1 pair with grey lenses € 84,95

68
 Reflection Foil K1200RS & GT
This set of reflection foils (4 pieces) increases the signal-
ling effect for the following traffic a lot. Your motorcycle
immediately is much more visible which increases also
your passive safety a lot. The black foils look unremar-
kably black during daylight, but also reflect in a striking
silver/white colour at night.

ArtNo. Description Price

ReflektionR11-K12RS Reflection Foil € 21,90
ReflSchwR11-K12RS Refelction Foil € 24,90
black
Reflection Foil K1200LT
This set of reflection foils (5 pieces) increases the signal-
ling effect for the following traffic a lot. Your motorcycle is
immediately much more visible which increases also your
passive safety a lot.

ArtNo. Description Price

ReflektionK12LT Reflection Foil € 20,90

Key holder with emblem

Useful key holder made of knurled aluminium, polished
on top, with our emblem. Just slot in the „emergency
key“ and fix with a set-screw. Article 0076 : Also possible
to hook in a carabineer. BMW K1200RS/GT/LT.

ArtNo. Description Price

0075 polished without eye € 21,90
0076 polished with eye € 29,95

www.mhornig.com 69
K 1200 RS & K 1200 GT & K 1200 LT

Dash pad K1200RS & GT

Dash pad in carbon look - protects this very visible part
of your bike from key scratches and enhances its appea-
rance. Scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80066 Dash pad K1200GT € 17,90
80065 Dash pad K1200RS € 17,30

Carbon Rear Hugger K1200RS & GT

Provides ultimate protection for the rear shock absorber!
Spend less time for cleaning and more time for riding!
Fits K 1200 RS & GT 1997-2005.
With ABE

ArtNo. Description Price

050.10.12 Carbon Rear Hugger € 299,90

High Windscreen K1200RS & GT

The K1200GT screen has an additional upward tilted
airfoil over its entire width to deflect wind pressure away
from the rider, ensuring an easy, relaxing ride, even on
long trips.
Height 50cm.
Fits for K1200RS 2001-2005.

For the K1200RS 1997-2000 we also offer a 46 cm

high windscreen. Similar to the picture, but with a smaller
spoiler.

ArtNo. Description Price

4663766 GT screen for K1200RS € 238,90
3115 2001-2005
2347650 GT screen for K1200RS € 179,90
1997-2000

70
 Windscreen K1200RS 2001-2004
The V-Stream windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonate which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it.
Windshield V-Stream, with homologation.

ArtNo. Description Price

Z2213 Light tint, Height 53cm € 269,00
Z2214 Dark tint, Height 33cm € 259,00

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 71
K 1200 RS & K 1200 GT & K 1200 LT
Brake pedal enlargement K1200RS & GT
This brake pedal enlargement is nicely machined of
aluminium, knurled and anodized.
It is quite simple to install - just slip it on and lock in
place with a set-screw.

ArtNo. Description Price

0100 anodized € 28,90

Speedometer trim K1200RS & GT

Trim rings for the speedometer, the revolution counter, the
temperature and fuel gauges are an optical improvement
for your K 1200 RS & GT.
You simply stick them to the speedometer, e.g. with silico-
ne, and you can remove them without any residue.
All rings are also available as single items.
ArtNo. Description Price
0408 1 set anodized € 68,90
s2ml Silicone 2ml € 0,75

Brake and Clutch Lever

Those levers are a replacement part for the original BMW
levers. They are very similar to the BMW levers. You will
receive exactly the lever you see on the picture. Check if
the same brake / clutch lever is installed on your BMW
before ordering. BMW K1200RS/GT/LT.

ArtNo. Description Price

311-521 Brake Lever € 46,90
310-521 Clutch Lever € 46,90

GPS Mounting K1200LT

Bolt + RAM-ball.
CNC-machined, for TomTom and Garmin Zumo GPS
devices. You can mount all RAM-mounts on the RAM-ball.
Install the RAM mount so that the navigation system
comes to the centre of the handlebars! Otherwise, the
mirror is covered. Colour: Black.

ArtNo. Description Price

NH 1/5 GPS Mounting black € 33,95

72
 Tector brake and clutch lever
K1200GT (2003-2005)
The CNC milled Tector levers fascinate by their high
functionality and their elegant design - for maximum
driving pleasure!, TÜV approved, comes with vehicle type
approval, six-way adjustable for the gap to the handlebar,
adjustable lever length (for 2 to 4 fingers), fixed fold-
function (only in the event of a crash)
ArtNo. Description Price
HT-LR3-B2-titan titanium-black € 179,95
HT-LR3-B2-schwarz black-black € 179,95
HT-LR3-B2-rot red-black € 179,95
HT-LR3-B2-blau blue-black € 179,95

Indicator bulb
Either orange or special coating. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses). Single.

ArtNo. Description Price

BLWB orange bulb12V/21W € 2,95
BLWBT Special coated bulb € 9,90
12V/21W

V-Stream Windshield K1200LT

The „V-Stream“ windshield sets new standards for design,
technology and comfort.
Made of Quantum/Lexan Polycarbonate which is 10x
more scratch-resistant than usual acrylic.
The windscreen will be shipped with everything you need
to mount it.
Windshield V-Stream, clear, with homologation.

ArtNo. Description Price

115106 Height 57,6cm, Width 71,4cm € 249,95
Z2461 Height 62,8cm, Width 73,6cm € 279,00
Z2462 Height 52,6cm, Width 68,6cm € 249,00

Chrome cap III K1200LT

The chrome cap III for the light adjustment will give your
BMW another additional highlight.
The installation is as easy as effective - just stick it on
with some glue like Uhu or silicone.
If you have no silicone at home you can also order our
high-quality silicone which is pre-filled in the volume you
need and easy to dose.

ArtNo. Description Price

0505 Chrome cap III € 4,90
s2ml Silicone 2ml € 0,75

www.mhornig.com 73
K 1200 R, R SPORT & K 1300 R

K1200 R / R Sport K1300R

built 2005-2008 / 2007-2008 built since 2009
1157 ccm cylinder capacity 1293 ccm cylinder capacity
power: 163 PS power: 173 PS
max. torque 127 Nm max. torque 140 Nm at 8.250/min.

74
 K1200R Customisation
This one-off special in ‘Rockster Orange’ Even the rear has been modified with a
with special fairing parts is a special show pillion seat cover reaching further rear-
bike and will not be put into production. wards for a more aggressive look.
We looked at the standard K1200R with Some of our series parts like the crash
its asymmetrical look of the air ram on pads, bar end weights, frame protectors
one side only, and constructed a very and side stand enlarger were also used.
complex closed-in front with integrated
indicators and two air inlets.
Virtually no standard fairing parts exist on To finish it off we also used a selection of
this bike, most have been either modified our Carbon fibre parts.
or are completely new constructions, such
as the short engine spoiler with ‘wings’
reaching up to the tank.

www.mhornig.com 75
K 1200 R, R SPORT & K 1300 R

Superbike handlebars
These handlebars create a new sporty look and improve
the handling of your bike. The mounting kit is made of
high-quality aluminium and the bars are especially de-
signed for the BMW K1200R, K1200R Sport & K1300R.
Width of the handlebar is 770mm.

ArtNo. Description Price

AC-K1200R K1200R & Sport € 469,00
S51130940406 K1300R € 499,00

Frame Cover
Cover for the hole above the swing arm journal.
Available in polished, anodized and black anodized
version.

ArtNo. Description Price

0352 polished € 13,90
0453 anodized € 14,40
0454 black anodized € 14,90

GPS Mounting with Plate

This aluminium plug fits for BMW handlebars with an in-
ner diameter of 15-19mm. Just insert the CNC-machined
plug in the open part of the handlebar (usually closed
with a plastic plug). The plug will stay in place thanks to
an aluminium expansion fastener.

ArtNo. Description Price

NH 3/7sw GPS Mounting with Plate € 74,90

GPS Mounting
Plug for BMW handlebars with inside diameter of 12-
16mm. Just insert the CNC-machined plug in the open
part of the handlebar (usually closed with a plastic
plug). The plug will stay in place thanks to an expansion
fastener. Almost any navigation system can be fixed on
the RAM-ball of this GPS mounting.
Colour: black.

ArtNo. Description Price

NH 3/1 Black Plug (Ram-ball) € 39,90

76
 Speedometer cover
In order to customize your BMW K1200R‘s & K1200R
Sport‘s & K1300R‘s speedo. Made of milled or laser-cut
aluminium. Anodized aluminium. Very easy to mount with
usual silicone. An installation instruction is included in
the set for the speedo and the revolution counter.
ArtNo. Description Price
0411-1 1 set anodized € 84,90
s10ml Silicone 10ml € 0,95

Cover
Covers for the fluid reservoirs.
You simply stick them onto the fluid reservoirs. Can be
removed without residue.
Made of high-quality aluminium.
They are sold in a set of two.

ArtNo. Description Price

0701 1 set anodized € 41,90
0702 1 set black anodized € 41,50
s2ml Silicone 2ml € 0,75

Rear wheel centre cover

Rear wheel centre cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
However, don‘t be worried - it does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

www.mhornig.com 77
K 1200 R, R SPORT & K 1300 R

Main Stand
With EG/ABE. This main stand is characterised by its
accuracy of fit and stability. It is very simple to fit on your
bike and useful for many works - like changing the brake
pads etc.
If you use an engine spoiler e.g. for the K1200S, slight
modifications are required. Instructions are included.

ArtNo. Description Price

HPS.07.360.100 Main Stand € 159,95

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with
a sidestand foot enlargement. More than 100% bigger
contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.
ArtNo. Description Price
0707 Sidestand foot enlargement € 29,90
70033 Extra screws € 3,95

Bar-end weights
These bar-end weights made of stainless steel or
aluminium show that BMW riders are aware of function
and form.
Stainless steel 220 gram each,
aluminium 84 gram each.
Shipment: 2 end weights, 2 screws.

ArtNo. Description Price

0805 1 set stainless steel € 38,90
0806 1 set aluminium anodized € 29,90

Axle pivot cover

This cover for the axle pivot for all new R1200, K1200
and K1300 bikes gives a nice looking finish to the rear
end and gives your motorcycle a classy look.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

78
 Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly. Made of tough ABS plastic the
extender attaches to the original fender with expanding
rivets which are of course included.

ArtNo. Description Price

054025 K1200R & K1300R € 29,95
054011 K1200R Sport € 29,95

Brake Pedal Enlargement

It is nicely machined of aluminium and natural anodized.
The surface is slotted in order to avoide slipping. This
enlargement simply slips on and is held in place by two
set-screws. Length: circa 6,2cm, Width: circa 2,4cm.

ArtNo. Description Price

0102 Brake Pedal Enlargement € 33,85

www.mhornig.com 79
K 1200 R, R SPORT & K 1300 R

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-Ring (4 pieces) € 2,80

Foot brake fluid reservoir cover

Cover for the foot brake fluid reservoir, CNC-machined of
aluminium.
If you have no silicone, you can also order our high-
quality silicone which is pre-filled in the volume you need
and easy to dose.

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

Front lifter
It is perfect for care, overwintering and servicing.
Made of steel 35x35mm, zinc-plated and quality „Made
in Germany“.

ArtNo. Description Price

2039-80II Front lifter € 114,00

Back lifter
Slide the rubber coated pipe of the back lifter in the final
drive of your BMW and lift it up. It is easy to use by one
person and is a very stable support for the bike.
Made of high-quality steel. Diameter 42mm, zinc-plated.
The diameter of the rubber is 52,5mm.

ArtNo. Description Price

BT.heck-lifter Back lifter € 89,00

80
 Synto brake- and clutch lever
Synto is the name of the 6x adjustable CNC high-
precision brake and clutch made of aluminium. Combines
elegance and functionality. Handling pure!
* 6 x adjustable CNC high-precision levers
* Racing proven Extremely light weight / 60g per lever
* CNC-milled from high tech aeronautical norm
aluminium EN 2017
* Perfect design – convincing finish
* Brilliant control feeling * Aerodynamic louver
* Levers ca. 5 cm shorter than original
* Predetermined breaking point at long version
* Adjuster colour is always black, only the black lever has
a silver adjuster * For brake and clutch
* Including street homologation TÜV part certificate (ABE)

There is a video for this product online: www.mhornig.com

ArtNo. Description Price

BH27-BKH1-15-11-K black-silver € 198,00
BH27-BKH1-17-15-K red-black € 198,00
BH27-BKH1-14-15-K blue-black € 198,00

www.mhornig.com 81
K 1200 R, R SPORT & K 1300 R

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors. The mirrors will
be moved a few centimetres outwards in order to improve
the view to the rear.
For K1200R & R Sport.

ArtNo. Description Price

BK 02 Mirror extensions € 49,95

Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your K1200& K1300. The crash
bars are designed to be very robust and allow for an
equal distribution of forces in a crash. You and your bike
are protected in the best possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle.
ArtNo. Description Price
SBL.07.413.100/B Crash bars black € 179,95

Crash Protectors Slider

Our pads or sliders protect the frame, engine and fairing
of your motorcycle. This protector is designed to fit
perfectly to your motorcycle. It is made of high-strength
milled aluminium and high-strength POM plastic. All
our pads are screwed to your motorcycle at at least 2-3
points. The advantage over round pads is that these
sliders can‘t break or snag on something on the road.
Shipment: Protectors for the left and right side with
mounting.
ArtNo. Description Price
RLBM03 Sliders € 279,00

Fork Crash Protectors

These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.

ArtNo. Description Price

FP100 Fork Crash Protectors € 64,90

82
 Taillight
The taillight with LED is available in clear with E-mark,
is very easy to install and fits perfectly. For K1200R and
K1200R Sport.

ArtNo. Description Price

WLL-87-L Clear lens with LED € 89,95
(not for model 2008-)

LED turning signals

Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a homo-
logation which makes it the first road legal LED for BMW
bikes! The LEDs flash yellow. Sold in pairs (for left and
right). Not compatible with BMW LED turning signals.
ArtNo. Description Price
01006 1 pair of LED turning € 84,95
signals with clear lenses
01006-g 1 pair of LED turning € 84,95
signals with grey lenses

Cardan-Crash-Protector
This crash protector for the cardan is made of CNC-lathed
plastic. This crash protector provides additional protection
for your motorcycle. You install the crash protector or
crash pad on your cardan with a stainless steel screw and
an expansion holder.

ArtNo. Description Price

059-27 Cardan-Crash-Protector € 39,90

Crash Protector Plus

These crash protectors are the latest design-version of
the EQ701 crash protectors. They offer the best possible
protection if a crash was not avoidable. The brand new
compound plastic can absorb forces of a crash without
braking. These crash protectors are not only very usable,
but also good looking. The crash protectors are for the
left and thr right side and you can mount them quite fast
and easily.

ArtNo. Description Price

eq701plus Crash Protector Plus € 100,90

www.mhornig.com 83
K 1200 R, R SPORT & K 1300 R
Windscreen ZTechnik
In order to create a more comfortable ride, other ma-
nufacturers offer extra-tall windshields or spoiler tops to
try to lift the air stream. But ZTechnik designed, for the
first time ever, a windshield with contours calculated and
adjusted to manage the riding environment.
Windshield, tinted, with homologation and mounting kit,
height 41 cm, width 52 cm.
K1200R & K1300R.
ArtNo. Description Price
Z2225 Height 43 cm, Width 52 cm € 329,95

Vario touring screen

This touring screen has a spoiler at the top of the airfoil.
The spoiler can be adjusted for height and angle in seven
positions. The air current deflected behind the spoiler
reduces the otherwise annoying turbulence.
K1200R & K1300R. With homologation. Length: 420 mm.

ArtNo. Description Price

vt-k1200r-rg Smoke grey € 145,90
4025066109135 Clear € 145,90

Indicator lens
Indicator lenses. Sold in a set (2 pieces).
However, you can also order them as single items.
With E-Mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.

ArtNo. Description Price

CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses).
Single.
ArtNo. Description Price
BLWB-CBUS
BLWB-CBUS orange coated bulb € 2,80
12V/10W
BLWBT-CBUS special coated bulb € 5,99
BLWBT-CBUS 12V/10W

84
 Lowering-Kit
Our lowering-kit makes sure that you can stand properly
on the ground with both feet. Your motorcycle will be
lowered to an ergonomically better seating position.
Riding is much more fun when you can touch the ground
with both legs.

For:
BMW K1200S (Typ K12S) 05-08
BMW K1200R (Typ K12) 05-08
BMW K1200R Sport (Typ K12R) 07-08
BMW K1300S (Typ K12S) 2009-*
BMW K1300R (Typ K12S) 2009-*
BMW K1300GT (Typ K12S) 2009-*
25mm lower, with EU street homologation.

ArtNo. Description Price

424-17080-11 Lowering-Kit € 98,50

ABS resin mud guard

This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your ArtNo. Description Price
bike. Not to forget your pillion rider!
5887N ABS resin mud guard € 199,90
Everything you need to install is included.
With ABE (European homologation).

www.mhornig.com 85
K 1200 R, R SPORT & K 1300 R

Dash pad
Carbon look. Protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80067 Dash pad € 15,50

Carbon Clutch Cover

Small, but very strong clutch protector.
Made of carbon fibre.

ArtNo. Description Price

KDO.016.K120S.K Clutch Cover € 109,90

Carbon Reservoir Cover Kit

Cover kit for reservoirs of brake and clutch fluid with car-
bon surface. The carbon fibre parts are precisely shaped
and are to be fitted by glue.

ArtNo. Description Price

400.10.40 1 set reservoir covers € 59,00
s2ml Silicone 2ml € 0,75

Carbon Engine Spoiler

Our engine spoiler is made of motor sport carbon fibre
and comes including the fasteners. Can be used with
the main stand and fits to the most after sales exhaust
systems.

ArtNo. Description Price

VEU.013.K120R.K Engine Spoiler € 889,90

86
 Carbon Rear Hugger
Provides ultimate protection for the rear shock absorber.
Spend less time for cleaning and more time for riding!

Fits K 1200 S, R & R Sport with tire sizes

180/55 and 190/50.
Fits BMW K1300R (190/55 tires).

ArtNo. Description Price

KHO.001.K120S.K K 1200R , R Sport € 299,90
KHO.101.K130S.K K 1300 R € 299,90

Carbon Exhaust Protector K1300R

High-quality carbon fibre, best workmanship,
sporty look.
Maximum weight saving. Easy to install.
Fits only the original exhaust!

ArtNo. Description Price

ABV.002.K130S.K Exhaust Protector € 189,90

Carbon Battery Cover

Fuel tank cover carbon middle part
for BMW K1200R, R Sport & K1300R.

ArtNo. Description Price

BAH.004.K120R.K Battery Cover € 159,90

Carbon heel guards

Heel guards made of carbon fibre.
A small and highly visible enhancement.
Very easy to install.
Sold in a set for the left and right.

ArtNo. Description Price

FSO.004.K120S.K 1 set heel guards € 169,90

www.mhornig.com 87
 K 1200 R, R SPORT & K 1300 R

Carbon front mudguard

This front mudguard is an optical improvement for your
BMW K1200R & R Sport & K1300R.
Made of carbon fibre.
ArtNo. Description Price
KVO.001.K120R.K Front mudguard € 269,90
K1200R, K1300R
KVO.002.K120S.K Front mudguard € 269,90
K1200R Sport

Remus HexaCone K1200R & Sport

More than 4kg lighter compared to the original exhaust.
Not only nice for the eyes, but also generates a powerful
sound - the HexaCone.

ArtNo. Description Price

154882 088305 Titanium incl. Cat. € 879,00

88
 How do you sit on your motorcycle seat?
Do you want to change something?
You must send
your seat
to us! Then read through the pages of the catalog
SEAT ALTERATION.
We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 89
K 1200 S & K 1300 S

K1200S K1300S
built 2005-2008 built 2009-2015
1157 ccm cylinder capacity 1293 ccm cylinder capacity
power: 167 PS power: 175 PS
max. torque 130 Nm max. torque 140 Nm
at 8.250/min.

90
 Brake Pedal Enlargement
It is nicely machined of aluminium and natural anodized.
The surface is slotted in order to avoid slipping. This
enlargement simply slips on and is held in place by two
set-screws. Length: circa 6,2cm, Width: circa 2,4cm.

ArtNo. Description Price

0102 Brake Pedal Enlargement € 33,85

Axle pivot cover

This cover for the axle pivot for all new R1200, K1200
and K1300 bikes gives a nice looking finish to the rear
end and gives your motorcycle a classy look.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

Bar-end weights
These bar-end weights made of stainless steel or
aluminium show that BMW riders are aware of function
and form.
Stainless steel 220 gram each,
aluminium 84 gram each.
Shipment: 2 end weights, 2 screws.

ArtNo. Description Price

0805 1 set stainless steel € 38,90
0806 1 set aluminium anodized € 29,90

Superbike handlebars
These handlebars create a new sporty look and
improve the handling of your bike. The mounting kit is
made of high-quality aluminium and the bars are
especially designed for the BMW K1200S.
Width of the handlebar is 770mm.

ArtNo. Description Price

AC-K1200S K1200S € 469,00
S50130940406 K1300S € 479,00

www.mhornig.com 91
K 1200 S & K 1300 S

GPS Mounting with Plate GPS Mounting RAM Ball

This aluminium plug fits for BMW handlebars with an Plug for BMW handlebars with an inside diameter of
inner diameter of 15-19mm. 12-16mm.
Just insert the CNC-machined plug into the open part of
the handlebar (usually closed with a plastic plug). Just insert the CNC-machined plug into the open part of
The plug will stay in place thanks to an aluminium the handlebar (usually closed with a plastic plug). The
expansion fastener. plug will stay in place thanks to an expansion fastener.
Garmin and TomTom motorcycle GPS units can be moun- Almost any navigation system can be fixed on the RAM-
ted without any problems. However, you can also adjust ball of this GPS mounting.
the plastic plate very easily for other devices.
Colour: Black.
Colour: Black.

ArtNo. Description Price ArtNo. Description Price

NH 3/7sw GPS Mounting with Plate € 74,90 NH 3/1 Black Plug € 39,90

You can find the latest products and

bargains online: www.mhornig.com

GPS Mount upper fork crown

This GPS Mounting for BMW K1200 and K1300 motor-
cycles will be mounted to the upper fork crown instead
of the BMW emblem. This black GPS Mount has a 1 inch
RAM-ball where you can mount almost any GPS unit, for
example with our clamps.

Fits for: BMW K1200S, BMW K1200R, BMW K1200R

Sport, BMW K1300S und BMW K1300R.

ArtNo. Description Price

NH 1/11 GPS mount upper fork crown € 33,90

92
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Rear wheel centre cover

Rear wheel centre cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

www.mhornig.com 93
K 1200 S & K 1300 S

Speedometer trim
The rings for the speedometer and the rev counter are an
optical Improvement for your K1200S & K1300S. Simply
stick them to the speedometer and they can be removed
without any residue.

ArtNo. Description Price

0406-1 1 set anodized € 54,90
s2ml Silicone 2ml € 0,75

Frame Cover
Cover for the hole above the swing arm journal.
Available in anodized and black anodized version.

ArtNo. Description Price

0453 anodized € 14,40
0454 black anodized € 14,90

Main Stand
With EG/ABE. This main stand is characterised by its
accuracy of fit and stability. It is very simple to fit on your
bike and very useful for different works - like changing the
brake pads etc.
When you use an engine spoiler e.g. for the K1200S,
slight modifications are required. Instructions are
included.

ArtNo. Description Price

HPS.07.360.100 Main Stand € 159,95

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% larger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.
ArtNo. Description Price
0707 Sidestand foot enlargement € 29,90
70033 Extra screws € 3,95

94
 Twin Tone Horn
This horn with its 123,5 db ensures that you get the
necessary respect and that you will not be overlooked.
This horn is perfect for motorcycles, because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU.
We offer also a mounting kit for the horn. This mounting
kit consists of a stainless steel mounting fitting for your
BMW K1200S & K1300S and the necessaty ready-to-
install wiring.

Horn:
12V 14A (non-stop operation),
height 12cm; width 13cm; depth 8cm.

ArtNo. Description Price

11690120 Twin Tone Horn (Wolo Bad Boy) € 44,80
11690120R12GS Mounting and wiring K1200S & K1300S € 49,00

Front lifter
Our front lifter is perfect for care, overwintering and
servicing.
Made of steel 35x35mm, zinc-plated
and quality „Made in Germany“.

ArtNo. Description Price

2039-80II Front lifter € 114,00

Back lifter
Slide the rubber coated pipe of the back lifter into the
final drive of your BMW and lift it up. Easy to use by one
person and very stable support for the bike.
Made of high-quality steel. Diameter 42mm, zinc-plated.
The diameter of the rubber is 52,5mm.

ArtNo. Description Price

BT.heck-lifter Back lifter € 89,00

www.mhornig.com 95
K 1200 S & K 1300 S

Petrol Cap Pad, 3D Carbon Look K1200S

Our protection pad is made of high-quality 3M carbon fi-
ber foil which protects your petrol cap or hides scratches.
3 parts, for petrol caps with 6 screws!

ArtNo. Description Price

80087 Petrol Cap Pad, 3D € 21,90
Carbon Look

96
 Cover
Covers for the fluid reservoirs.
You simply stick them onto the fluid reservoirs. Can be
removed without residue.
Made of high-quality aluminium.
They are sold in a set of two.

ArtNo. Description Price

0701 1 set anodized € 41,90
0702 1 set black anodized € 41,50
s2ml Silicone 2ml € 0,75

Foot brake fluid reservoir cover K1200S

Cover for the foot brake fluid reservoir, CNC-machined of
aluminium.
Image shows K1200R.
It is also visible on K1200S.

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

Mirror Extensions
Our mirror extensions (25mm) are the perfect solution if
you mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear.

ArtNo. Description Price

BK 05 Mirror extensions € 59,95
(1 set)

www.mhornig.com 97
K 1200 S & K 1300 S

Cardan-Crash-Protector
This crash protector for the cardan is made of CNC-lathed
plastic. This crash protector provides additional protection
for your motorcycle. You install the crash protector or
crash pad on your cardan with a stainless steel screw and
an expansion holder.

ArtNo. Description Price

059-27 Cardan-Crash-Protector € 39,90

Lowering-Kit
Our lowering-kit makes sure that you can stand properly
on the ground with both feet. Your motorcycle will be
lowered to an ergonomically better seating position.
Riding is much more fun when you can touch the ground
with both legs.
25mm lower, with EU street homologation.

ArtNo. Description Price

424-17080-11 Lowering-Kit € 98,50

Synto brake- and clutch lever

Synto is the name of the 6x adjustable CNC high-
precision brake and clutch made of aluminium.
Combines elegance and functionality. Handling pure!
* 6 x adjustable CNC high-precision levers
* Racing proven Extremely light weight / 60g per lever
* CNC-milled from high tech aeronautical norm
aluminium EN 2017
* Perfect design – convincing finish
* Brilliant control feeling * Aerodynamic louver
* Levers ca. 5 cm shorter than original
* Predetermined breaking point at long version
* Adjuster colour is always black, only the black lever has
a silver adjuster * For brake and clutch
* Including street homologation TÜV part certificate (ABE)
There is a video for this product online: www.mhornig.com

ArtNo. Description Price

BH27-BKH1-15-11-K black-silver € 198,00
BH27-BKH1-17-15-K red-black € 198,00
BH27-BKH1-14-15-K blue-black € 198,00

98
 Lenses
Clear or grey lenses for the front indicators with 2 orange
bulbs. Replacement bulb with orange coating 12V/16W.
NEW! With European approval mark.

ArtNo. Description Price

400.10.20w 1 set clear lenses € 69,90
400.10.20g 1 set grey lenses € 69,90

Taillight
The taillight with LED is available in clear with E-mark. It
is very easy to install and fits perfectly.

ArtNo. Description Price

WLL-87-L Clear lens with LED € 89,95

LED turning signals

Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a homo-
logation which mkaes it the first road legal LED for BMW
bikes! The LEDs flash yellow. Sold in pairs (for left and
right). Not compatible with BMW LED turning signals.
ArtNo. Description Price
01006 1 pair of LED turning € 84,95
signals with clear lenses
01006-g 1 pair of LED turning € 84,95
signals with grey lenses

Indicator lens
Indicator lenses. Sold in a set (2 pieces).
However, you can also order them as single items.
With E-Mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.

ArtNo. Description Price

CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

www.mhornig.com 99
K 1200 S & K 1300 S

BLWB-CBUS BLWBT-CBUS

10031086 WLG-194

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
Single.
ArtNo. Description Price
BLWB-CBUS orange bulb 12V/10W € 2,80
BLWBT-CBUS special bulb 12V/10W € 5,99
10031086 orange coated bulb € 3,95
12V/18W front
WLG-194 Chrome colour bulbs € 7,90
12V/18W front

100
 ABS resin mud guard ArtNo. Description Price
This solid rear hugger is made of ABS resin plastics and
5887N ABS resin mud guard € 199,90
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider!
Everything you need to install it is included.
With ABE (European homologation).

Carbon Rear Hugger K1200S

Provides ultimate protection for the rear shock absorber.
Spend less time for cleaning and more time for riding!
Fits K1200S with tire sizes 180/55 and 190/50.

ArtNo. Description Price

KHO.001.K120S.K Rear Hugger € 299,90

Carbon Rear Hugger K1300S

Provides ultimate protection for the rear shock absorber.
Spend less time for cleaning and more time for riding!
Fits BMW K1300S (190/55 tires).

ArtNo. Description Price

KHO.101.K130S.K Rear Hugger € 299,90

www.mhornig.com 101
K 1200 S & K 1300 S

Dash pad K1200S

Carbon look. Protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80068 Dash pad € 15,40

Carbon Heel guards

Heel guards made of carbon fibre.
A small and highly visible enhancement.
Very easy to install.
Sold in a set for the left and the right.

ArtNo. Description Price

FSO.004.K120S.K 1 set heel guards € 169,90

Carbon Rear Light Cover

This rear light cover is made of high-quality carbon fibre
and is available with holes for handgrips.

ArtNo. Description Price

RHO.008.K120S.K Rear Light Cover € 359,90
with holes

102
 Carbon Engine Spoiler
Made of high-quality carbon fibre.
The lower part is closed as used for racing.
Fits the BMW K1200S & K1300S.
ArtNo. Description Price
VEU.003.K120S.K Engine Spoiler € 719,90
Long version
VEU.012.K120S.K Engine Spoiler € 719,90
Short version
(Image: Long version)

Carbon Fuel Tank Fairing

This fuel tank fairing is made of high-quality carbon fibre
and protects your tank from scratches. The items are
especially made for your BMW K1200S and K1300S.
The fuel tank fairing kit consists of two parts.

ArtNo. Description Price

TAO.010.K120S.K Battery cover & fuel € 359,90
tank middle part
(2 parts)
BAH.009.K120S.K Battery Cover € 159,90

Carbon front fairing covers on the light

High-quality carbon fibre.
Best workmanship, sporty look.
Maximum weight saving.
Easy to install.
K1300S.

ArtNo. Description Price

VEO.006.K130S.K Front fairing covers € 199,90
on the light

Carbon Front mudguard

This front mudguard is an optical improvement
for your BMW K1200S & K1300S.
Made of carbon fibre.

ArtNo. Description Price

KVO.002.K120S.K Front mudguard € 269,90

www.mhornig.com 103
K 1200 S & K 1300 S

Carbon Exhaust cover front

Beautiful high-quality carbon fibre. Covers the joint
between collector and silencer.
Only for the original exhaust.
Available for K1200S.

ArtNo. Description Price

ABV.006.K120S.K Exhaust cover front € 189,90

Carbon Exhaust Protector

High-quality carbon fibre, best workmanship,
sporty look.
Maximum weight saving. Easy to install.
Fits only the original exhaust!
K1300S.

ArtNo. Description Price

ABV.002.K130S.K Exhaust Protector € 189,90

Carbon Reservoir Cover Kit

Cover kit for reservoirs of brake and clutch fluid with car-
bon surface. The carbon fibre parts are precisely shaped
and are to be fitted by glue.

ArtNo. Description Price

400.10.40 1 set reservoir covers € 59,00
s2ml Silicone 2ml € 0,75

Carbon Clutch Cover

Small, but very strong clutch protector.
Made of carbon fibre.

ArtNo. Description Price

KDO.016.K120S.K Clutch Cover € 109,90

104
 Spoiler screen
This screen is similar to the original screen, but with a
small lip edge at the top.
The spoiler screen will be delivered with ABE,
length: 370mm.

ArtNo. Description Price

S-k1200s-rg Smoke grey € 84,90
S-k1200s-k Clear € 84,90
S-k1200s-sw Black € 84,90

Racing screen
The racing screen basically has the same shape as the
original one, with a little hump in the middle, to reduce
the wind pressure on the helmet.
With ABE, length: 405mm.

ArtNo. Description Price

4025066099238 Smoke grey € 84,90
4025066099221 Clear € 84,90

Fork Crash Protectors

These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.

ArtNo. Description Price

FP100 Fork Crash Protectors € 64,90

www.mhornig.com 105
K 1200 S & K 1300 S

Touring screen
The touring shield has the same shape as the original
one, but with an additional raised wind deflector (about
5-7 cm high at the top), covering the entire width. This
deflects the wind over the rider and allows a relaxed ride,
particularly on longer trips.
Length: 415mm.

ArtNo. Description Price

T-k1200s-rg Smoke grey € 84,90
T-k1200s-k Clear € 84,90
4025066099214 Black € 84,90

Vario touring screen

This type of touring screen has a small spoiler at the top
of the wind deflector. Can be manually set to seven posi-
tions in terms of angle and height. Tiresome turbulence is
also reduced by the air flow at the rear of the spoiler.
Length: 435mm.

ArtNo. Description Price

4025066099283 Smoke grey € 127,90
VT-k1200s-k Clear € 127,90

Original shape screen

This windscreen has the same shape as the original
windscreen, but is available in different colours.
Length 350mm, with ABE.
Available in clear, smoke grey and black.

ArtNo. Description Price

4025066099061 Smoke grey € 74,90
4025066099054 Clear € 74,90
4025066099092 Black € 74,90

106
 Remus HexaCone K1200S
More than 4kg lighter compared to the original exhaust.
Not only nice for the eyes, but also generates a powerful
sound - the HexaCone.
Available in titanium.

ArtN0. Description Price

154882 088305 HexaCone, slip on, € 879,00
Titanium

SHARK DSX-5 exhaust K1300S

The SHARK DSX-5 slip-on exhaust impresses with its
special design as well as with its throaty, powerful sound.
The elliptical silencer with pentagonal end cap is made
of polished aluminium / black anodized aluminium and
is assembled with a screwable mount. The db-killer is
removable and the original catalyser will be omitted.
Colour 840406: silver (polished aluminium / end cap
coated stainless steel matt black)
Colour 841007: black (anodized aluminium / end cap
polished stainless steel)
Height: 125mm, Width: 100mm, Length casing: 360mm
Total length: 460mm
With European street homologation! Attention: It is forbid-
den to use exhausts without dB-killer in public traffic!
ArtNo. Description Price
840406 silver € 349,95
841007 black € 349,95

How do you sit on your motorcycle seat?

Do you want to change something?

Then read through the pages of the catalog

SEAT ALTERATION.
We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 107
K 1200 GT & K1300 GT

K1200GT & K1300GT

built since 2006
1157 ccm cylinder capacity
power: 152 PS
max. torque 130 Nm

108
 GPS Mounting
Easy and fast mounting is possible with our new
GPS mounting for BMW K1200GT & K1300GT.

The windscreen can still be changed in its position and

you can always read your GPS without looking away
from the street.

No vibrations!

For Garmin SPIII, SP26**, 2720, Zumo 550, Zumo 590,

Zumo 595, Zumo 660 and Nüvi series.
SP26** & 2720 owners will need to purchase the
Garmin motorcycle mount.

Colour: anodized silver.

In order to provide the necessary distance from the

screen you need the Zumo adapter for all Garmin and
BMW navigators (article: Zumo-Ad).

ArtNo. Description Price

44007 GPS Mounting € 76,90
Zumo-Ad Adapter for Garmin Zumo € 11,60
This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo. With this
adapter the GPS gets 12mm closer to you and it can be moved 7,5mm or 15mm
up or down. You need this option for the Zumo’s bus bar.
Made of black Pom incl. all screws.
ZumoAd340-350 Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom € 15,90
400, 410, 420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and
the TomTom holder.
ram-1zoll Adapter for 1” RAM-ball € 34,90

You can find the latest products and bargains

online: www.mhornig.com

www.mhornig.com 109
K 1200 GT & K1300 GT

Frame cover
This cover for the open hole beyond the swing arm pivot is
made of aluminium and available in different versions.
It gets fixed on the left side.

ArtNo. Description Price

0440 anodized € 14,90
0441 black anodized € 14,90

Brake Pedal Enlargement

It is nicely machined of aluminium and natural anodized.
The surface is slotted in order to avoid slipping. This
enlargement simply slips on and is held in place with two
set-screws. Length: circa 6,2cm, Width: circa 2,4cm.

ArtNo. Description Price

0102 Brake Pedal Enlargement € 33,85

Axle pivot Cover

This cover for the axle pivot for all new R1200, K1200
and K1300 bikes gives a nice looking finish to the rear
end and gives your motorcycle a classy look.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

Centre cap with emblem

Made of aluminium with emblem.
Changeover instructions are included in delivery.

ArtNo. Description Price

0284 anodized € 23,90

110
 Rear wheel centre cover
Rear wheel centre cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

Stainless steel end weights

These end weights are made of stainless steel and create
a noble look for your bike. Included are two S/S-end
weights and two S/S-countersunk screws M8 for fixing.
BMW K1200GT 2006 model or newer.

ArtNo. Description Price

0451 1 set stainless steel € 39,90
end weight

Oil cooler screens K1200GT

This anodized aluminium screen protects the oil cooler
from stones, flies and other dross. It is very easy to install
and gives your K1200GT an even more sporty
appearance.
If you have no silicone, you can also order our high-
quality silicone which is pre-filled in the volume you need
and easy to dose.
ArtNo. Description Price
0607 Oil cooler screens € 20,90
s10ml Silicone 10ml € 0,95

www.mhornig.com 111
K 1200 GT & K1300 GT

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-Ring (4 pieces) € 2,80

Synto brake- and clutch lever K1200GT

Synto is the name of the 6x adjustable CNC high-
precision brake and clutch made of aluminium. Combines
elegance and functionality. Handling pure!
* 6 x adjustable CNC high-precision levers
* Racing proven Extremely light weight / 60g per lever
* CNC-milled from high tech aeronautical norm
aluminium EN 2017
* Perfect design – convincing finish
* Brilliant control feeling * Aerodynamic louver
* Levers ca. 4 cm shorter than original
* Predetermined breaking point at long version
* Adjuster colour is always black, only the black lever has
a silver adjuster * For brake and clutch
* Including street homologation TÜV part certificate (ABE)
There is a video for this product online: www.mhornig.com

ArtNo. Description Price

BKH3-KH35-15-11-K black-silver € 198,00
BKH3-KH35-17-15-K red-black € 198,00
BKH3-KH35-14-15-K blue-black € 198,00

112
 Sidestand foot enlargement
Feel safer when parking your bike on dirt or asphalt with a
sidestand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.
The pictures show the higher version (article 0718
combined with article 0718-20). This one is about 20mm
high (10mm can easily be screwed on or off)
and makes your bike stand more upright. You then need
much less effort to get ready for riding, especially when
riding with luggage.

ArtNo. Description Price

0718 Sidestand foot enlargement € 27,80
0718-20 Heightening + 10mm € 9,95

Horn Wolo Very Loud

This horn with its 115 db ensures that you get the necessary respect and that you will not be
overlooked. The horn is perfect for motorcycles, because it is small and easy to install.
Because of its E-approval mark it is street legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm; diameter 8,5cm.

ArtNo. Description Price

TM80K12/13 Horn Wolo Very Loud and wiring € 79,00

www.mhornig.com 113
K 1200 GT & K1300 GT

Front lifter
Our front lifter fits for BMW K1200GT & K1300GT.
It is perfect for care, overwintering and servicing.
Made of steel 35x35mm, zinc-plated and quality „Made
in Germany“.

ArtNo. Description Price

2039-80II Front lifter € 114,00

Back lifter
Slide the rubber coated pipe of the back lifter into the
final drive of your BMW and lift it up. Easy to use by one
person and very stable support for the bike.
Made of high-quality steel. Diameter 42mm, zinc-plated.
The diameter of the rubber is 52,5mm.

ArtNo. Description Price

BT.heck-lifter Back lifter € 89,00

V-Stream Windshield
The „V-Stream“ windshield sets new standards for design,
technology and comfort.
Made of Quantum/Lexan Polycarbonate which is 10x
more scratch-resistant than usual acrylic.
The windscreen will be shipped with everything you need
to mount it.
Windshield V-Stream, clear, with homologation.

ArtNo. Description Price

115107 Height 64cm, Width 60cm € 229,95
Z2453 Height 68cm, Width € 259,00
60,5cm

114
K Sticker K1300GT K Sticker K1200GT
This 4-piece K sticker is especially designed for your BMW This 6-piece K sticker is especially designed for your BMW
K1300GT in order to give your luxury tourer a distinctive K1200GT (model 2006 - *) in order to give your luxury
and individual look. Made of high-quality foil which can tourer a distinctive and individual look. Made of high-
easily be applied. For left and right. quality foil which can be easily applied. For left and right.

ArtNo. Description Price ArtNo. Description Price

k13gt-anthrazit 1 set anthracite K sticker € 82,90 k-anthrazit 1 set anthracite K sticker € 82,90
k13gt-silver 1 set silver K sticker € 82,90 k-silver 1 set silver K sticker € 82,90
00WZ02 Ductor with felt € 3,40 00WZ02 Ductor with felt € 3,40

Indicator Lenses
Not only street legal with E-mark, but also
looks very nice and sporty.
Incl. orange bulbs.
Fit for K1200GT 2006-* & K1300GT.
Street legal with E-mark!
Picture shows white indicator lenses.

ArtNo. Description Price

WLB-59g 1 set Grey indicator Lenses € 79,90
WLG-05 1 Piece orange bulb € 4,95

www.mhornig.com 115
K 1200 GT & K1300 GT

Dash pad
Carbon look. Protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80064 Dash pad € 11,90

Carbon Clutch Cover

Small, but very strong clutch protector.
Made of carbon fibre.

ArtNo. Description Price

KDO.016.K120S.K Clutch Cover € 109,90

Fork Crash Protectors

These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.
ArtNo. Description Price
FP100 Fork Crash Protectors € 64,90

How do you sit on your motorcycle seat?

Do you want to change something?

Then read through the pages of the catalog

SEAT ALTERATION.
We will change your seat exactly like you want it to be.

You must send

your seat
to us!

116
 Remus HexaCone
More than 4kg lighter compared to the original exhaust.
Not only nice for the eyes, but also generates a powerful
sound - the HexaCone. Available in titanium.

ArtNo. Description Price

154882 088305 Titanium € 879,00
incl. Cat.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag? You can find it under SOFT BAGS in
the catalog and online: www.mhornig.com

www.mhornig.com 117
K1600GT & GTL

K1600GT & GTL

built since 2011
1600 ccm cylinder capacity
power: 160 PS

118
 Remus HexaCone
More than 5kg lighter compared to the original exhaust.
Not only nice for the eyes, but also a powerful sound - the
HexaCone. Available in titanium or stainless steel black
(Black Hawk). With homologation. For Euro 4!
BMW K1600GT/GTL (09/2016-*)

ArtNo. Description Price

0564782 089917LR Black Hawk € 1370,00
054882 089917LR Titanium € 1539,00

Side stand foot enlargement

Feel safer when parking your bike on dirt or asphalt with
a sidestand foot enlargement. More than 100% bigger
contact area. Made of high-quality aluminium.
Black anodized. Easy to install.

ArtNo. Description Price

0723 Model year 2011-2015 € 28,90
0731 Model year 2016 - € 33,95

Spoiler for windshields

The MRA X-creen spoiler can be set according to your
individual needs in order to eliminate turbulence, wind
pressure or annoying noises. The spoiler can be adjusted
with two independently adjustable pivot points. The
spoiler is 36cm wide and 16.3cm high and available in
clear or smoke grey with EU homologation for the original
windshield and all MRA windshields! The spoiler can
either be screwed or clamped with an extra bracket.
Screwed: Attachment of the X-creen-Spoiler via four
screws. The existing screen must be drilled for this
purpose. Clamped: The X-creen-spoiler is clamped with
a special holder onto the existing screen (picture). This
mounting needs no drilling or gluing. This bracket is not
part of the standard product range of the X-creen and ArtNo. Description Price
must be purchased separately. The distance between the 4025066125036 clear € 95,90
two black mountings which will be screwed to your screen
4025066125043 smoke grey € 95,90
is 25cm. If you use the clamps, your windshield needs to
be at least 28cm wide on the top. 4025066125074 Clamps € 19,90

Find all products for your K1600GT and GTL online:

www.mhornig.com

www.mhornig.com 119
K1600GT & GTL

Oil Filler Plug

This oil filler plug is made of high-quality aluminum
and available in two colours: black anodized and silver
anodized. You can open this oil filler plug with a torx T45.
The oil filler plug and the dipstick are milled of one piece
aluminium.

ArtNo. Description Price

0026 black anodized € 35,80
0027 silver anodized € 35,90

Brake Pedal Enlargement

It is nicely machined of aluminum and natural anodized.
The surface is slotted in order to avoide slipping. This
enlargement simply slips on and is held in place by two
set-screws.

ArtNo. Description Price

0104 K1600GT Enlargement € 40,90
0106 K1600GTL Enlargement € 41,90

Windscreen VStream
The „V-Stream“ windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonat which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it.

ArtNo. Description Price

Z2463 Clear, Height 54cm, € 274,00
Width 59cm

Z2464 Clear, Height 58cm, € 329,90

Width 60cm

120
 Twin Tone Horn K1600GT
This horn with its 123,5 db ensures that you get the
necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU.
We offer also a mounting kit for the horn. This mounting
kit consists of a stainless steel mounting fitting for your
BMW K1600GT and the necessary ready-to-install wiring.
Horn: 12V 14A (non-stop operation)
height 12cm; width 13cm; depth 8cm
Not for K1600GTL!!!

ArtNo. Description Price

11690120 Twin Tone Horn € 44,80
11690120K16GT Mounting and wir- € 49,50
ing (without horn)

Wolo Very Loud Horn K1600GTL

This horn ensures with its 115 db that you get the ne-
cessary respect and that you will not be overlooked. The
horn is perfect for motorcycles, because it is small and
easy to install. Because of its E-approval mark it is street
legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm;
diameter 8,5cm.

ArtNo. Description Price

TM80BMW Wolo Very Loud Horn and € 69,90
wiring

Fork Crash Protectors

These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.

ArtNo. Description Price

FP101 Fork Crash Protectors € 68,90

www.mhornig.com 121
K1600GT & GTL
Bar-end weights
These bar-end weights made of stainless steel or
aluminium show that BMW riders are aware of function
and form.
Stainless steel 220 gram each,
aluminium 84 gram each.
Shipment: 2 end weights, 2 screws.

ArtNo. Description Price

0805 1 set stainless steel € 38,90
0806 1 set aluminium anodized € 29,90

Reflection Foil
This set of reflection foils (4 pieces) increases the signal-
ling effect for the following traffic a lot. Your motorcycle is
immediately much more visible which increases also your
passive safety a lot.
The black foils look unremarkably black during daylight,
but also reflect in a striking silver/white colour at night.

ArtNo. Description Price

RefR12RTLC-K16 Reflection Foil € 21,90
ReflSchwR12RTLC-K16 Reflection Foil black € 24,90

122
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.
Length ca. 5,7 cm, Diametre ca. 2,4 cm.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Suitcase Flat Lids

Suitcase flat lids are sold as pair (for left and right).
These lids are designed for urban mobility. No more trou-
ble in traffic. We wished to reduce the original suitecase‘s
thickness for an easier driving between cars in urban
areas.
Thickness:
Original BMW lid 17cm vs. Suitcase flat lid 6cm!
The total motorcycle width reduction is 22 cm.
Material: ABS plastics.
Including stainless steel brackets, keep the original secu-
ArtNo. Description Price rity belt, foam sealed against dust and water.
HRSSACO00222 Suitcase Flat Lids € 459,00 Colour: Black shiny.

www.mhornig.com 123
R 850 - 1100 - 1150 GS & ADVENTURE

R850/1100/1150GS & Adventure

built since 1994/1998/1999/2002
848/1085/1130 ccm cylinder capacity
power: 70/80/85 PS

124
 GPS Mounting
Fast, easy mounting is possible with our new GPS mount
for BMW R1100, 1150GS & Adventure.

No vibrations!

For all BMW Navigators, Garmin Zumo, SPIII, SP26**,

2720, Zumo 550, Zumo 590, Zumo 595, Zumo 660 and
Nüvi series.
GPS SP26** & 2720 owners will need to purchase the
Garmin motorcycle mount.

Colour: anodized silver

ArtNo. Description Price

44004 GPS Mounting BMW R1100, 1150GS & Adv. € 39,90
Zumo- Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
Ad340-350
tomt-Ad Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, € 15,90
Ed 2 420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the TomTom
holder.
ram-1zoll Adapter for 1“ RAM-ball € 34,90

Mirror Heightening
Our mirror heightenings are the perfect solution if you
mainly see your shoulders in the rear mirrors. The mirrors
will be moved 2,5 centimeters (R1150R) or 3,0 centime-
ters (R850/1100R) upwards which creates the necessary
space in order to improve the view to the back.

ArtNo. Description Price

BK 00 1 set mirror risers € 19,90
R1150GS & Adv.
BK 00lr 1 set mirror risers € 19,95
R850/1100GS

Key holder with emblem

Useful key holder made of knurled aluminium, polished
on top, with our emblem.
Just slot in the „emergency key“ and fix with a set-screw.
0076 : Also possible to hook in a carabineer.

ArtNo. Description Price

0075 polished without eye € 21,90
0076 polished with eye € 29,95

www.mhornig.com 125
R 850 - 1100 - 1150 GS & ADVENTURE

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Length ca.
7,5 cm, diametre ca. 2,4 cm.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-Ring (4 pieces) € 2,80

Brake pedal enlarger

- Until 08/97 (0130+0130-1) for R850/1100GS
- Since 09/97 (0140+0140-1) for R850/1100/1150
GS & Adv.
This special part is made of extremely handy aluminium
and enables safe braking. It gets mounted with two
screws, u-screws, nut and hulls which are all yet with the
enlargement.
ArtNo. Description Price
0130 Aluminium € 20,60
0130-1 anodized € 21,70
0140 Aluminium € 20,90
0140-1 anodized € 22,60

Handlebar Risers
Handlebars rise by 25 mm for R850/1100/1150GS.
- For an upright and relaxed riding position
- Less strain on shoulders and wrists
- For sport bikes: Better standing, less exhaustive riding
- Better handling - Black or silver anodized
- EG/ABE street homologation
When using the original BMW fog lamps, you also need
our special screw-set (01-040-0272-0). Maybe you must
move the brake line behind the triple tree.

ArtNo. Description Price

040-0265 Handlebar Risers € 52,90
25mm black
610-0010 Handlebar Risers € 52,90
25mm silver
040-0272 Special screw-set € 20,80

126
 Speedometer trim
These rings for your speedometer and your rev counter are
an optical improvement for your GS, RT or RS. Just stick
on with glue or some silicone. May be removed without
residue. Consists of a set of both rings.

ArtNo. Description Price

0401 1 set anodized € 49,90
s2ml Silicone 2ml € 0,75

Camshaft lid
Made of high-quality aluminium and fits all four valve
twins as a replacement for the original plastic cap.
Delivery contains a set of two caps
with the o-rings and screws.

ArtNo. Description Price

0360 1 set anodized € 35,00
60010 S/S Round Head Screws € 0,42
(you need 4 screws)

Telelever end caps

These telelever end caps add a new optical highlight
to your BMW.
Nice form and robust material.
Always sold as a set.

ArtNo. Description Price

0290 1 set anodized € 30,50

Footpeg plate
Besides providing a nice, finished look, these covers help
to keep dirt and grime away from the pivots.
They are made of aluminium.
Installation is simple: Just insert the stem into the pivot
and tighten the central Allen screw to expand
the retaining sleeve. 2 pieces = 1 set.

ArtNo. Description Price

0410 1 set anodized € 23,90

www.mhornig.com 127
R 850 - 1100 - 1150 GS & ADVENTURE

Rear Wheel Hub Cap

Nice cover for the rear wheel hub which is made of high-
quality aluminium.
Available in anodized. Delivery includes a set of the cover,
the installation kit and the mounting guidelines.
You can also download an installation instruction online!

ArtNo. Description Price

0210 anodized € 40,95

Cooler protection
Perfect protection for your oil cooler with nice design,
made of high-quality aluminium for the R1150GS & Adv.
The lattice is surrounded by a solid frame and keeps
insects and dirt away from the oil cooler.
Installation instructions included.

ArtNo. Description Price

8160363 anodized € 34,90
8160363-s black € 36,90

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0240 anodized € 25,90
0055 black anodized € 26,90
10011 O-ring € 1,20

Oil filler plug

This oil filler plug with Allen tool looks absolutely great
because of its finish and has good function as a locking
plug. Use a size 5 Allen key (usually found in your BMW
toolkit) in order to fit and remove.

ArtNo. Description Price

0010 anodized € 23,90
0020 black anodized € 24,30
10011 O-ring € 1,20

128
 Levers R1150GS & Adventure
These levers are a replacement part for the original BMW
levers. They are very similar to the BMW levers. These
levers will be shipped as you see them on the picture.
Check if the same lever is installed on your BMW before
ordering.

ArtNo Description Price

310-521 Clutch lever € 46,90
311-521 Brake lever € 46,90

Foot brake fluid reservoir cover

Cover for the foot brake fluid reservoir, CNC-machined
of aluminium.
Image shows K1200R.
It is also visible on R850/1100/1150GS.

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

www.mhornig.com 129
R 850 - 1100 - 1150 GS & ADVENTURE
Sidestand foot enlargement
Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.

The higher version (article 0711 combined with article

0711-20 or article 0712 combined with article 0712-20)
is about 20mm high (10mm can easily be screwed on
or off). Makes your bike stand more upright meaning you
need much less effort to get it off the stand before riding,
especially when riding with luggage.

ArtNo. Description Price

R1100/1150GS MY 1998-*
0711 Sidestand foot enlargement € 29,90
normal version
0711-20 Heightening € 11,90
R1150GS Adv.
0712 Sidestand foot enlargement € 32,80
normal version
0712-20 Heightening € 11,90

130
 Centre cap top yoke
This part is an optical improvement for your top yoke as it
is made of robust aluminium with an emblem.
An integrated o-ring ensures a snug fit.

ArtNo. Description Price

0260 anodized € 25,90
0262 black anodized € 23,90
0265 anodized (without emblem) € 20,80

Stainless Steel Crash bars

These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!

ArtNo. Description Price

Z7105 Stainless Steel Crash bars € 309,90
For:
BMW R850GS
BMW R1100GS 93-98
BMW R1150GS 99-03

Fork tube cover

Nice looking cover for the fork tube which works as a
replacement for all plastic caps,
kept firmly in place by an o-ring.
In order to replace all plastic caps you get
2 covers in a set.

ArtNo. Description Price

0220 1 set anodized € 24,90
0221 1 set black anodized € 24,95

www.mhornig.com 131
R 850 - 1100 - 1150 GS & ADVENTURE

Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your R1100GS, R1150GS &
R1150GS Adv. model. The crash bars are designed to be
very robust and allow for an equal distribution of forces
in a crash. You and your bike are protected in the best
possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle.

ArtNo. Description Price

SBL.07.405.100 Crash bars silver € 219,95
R1100GS 93 - 99
SBL.07.409.100 Crash bars silver € 219,95
R1150GS 00 - 04
SBL.07.408.100 Crash bars silver € 199,95
R1150GS Adv.

Stainless steel end weight

These end weights are made of stainless steel and create
a noble look for your bike. Included are two S/S-end
weights and two S/S-countersunk screws M8 for fixing.
Fits for R850/1100/1150GS.

ArtNo. Description Price

0451 1 set stainless steel € 39,90
end weights

S/S screws
Brake fluid reservoir & clutch reservoir
get a new look with these 4x S/S screws.
70070: For all (elderly) bikes with a hydraulic brake
and no hydraulic clutch.
70075: For all (newer) bikes with a hydraulic brake
and a hydraulic clutch.

ArtNo. Description Price

70070 4 x M5x16 € 3,95
70075 4 x M4x16 € 3,95

132
 Chrome cap I
The chrome caps for the gear oil filler screw are an optical
improvement for your BMW.
You simply push them on. The caps fit into the gear oil
filler screw with Allen head and will fit any other screws
with the same Allen size.

ArtNo. Description Price

0500 Big chrome caps € 4,50
0501 Small chrome caps € 4,20

Chrome cap II
Chrome cap II was created for covering the
gear oil filler screw.
Like cap I it is just pushed on and fits perfectly.

ArtNo. Description Price

0502 Chrome cap II € 4,40

Paralever pivot cap

Effective prevention of dirt is guaranteed by this
paralever pivot cap.
Highest quality and a perfect look. Anodized aluminium.

ArtNo. Description Price

0070 anodized € 13,90

ABS resin mud guard

This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider!
Everything you need to install it is included. With ABE
(European homologation).
Fits for R1100GS, R1150GS & Adv.
ArtNo. Description Price
5886N ABS resin mud guard € 187,90

www.mhornig.com 133
R 850 - 1100 - 1150 GS & ADVENTURE
Touring windshield R1100GS
For long distance rides PUIG introduces the Touring series
to minimize the windblast against the rider. These screens
raise the windblast for several centimeters, allowing the
rider to keep a more comfortable position riding the
motorcycle and a shaded part on the lower section of the
screen to cover cables behind the speedometer.
10 cm higher than the original screen.

ArtNo. Description Price

0295W Clear € 129,90
0295H Smoke grey € 129,90

Vario screen R1150GS

The Varioscreen can be adjusted for angle or height. This
screen has an additional wind channel. Because of the
wind channel and the adjustment facility, this screen can
be adjusted to suit the requirements of the rider.

If you want to install it on a BMW R1150GS Adv., you

need original items from the BMW R1150GS.

ArtNo. Description Price

V-r1150gs-rg smoke grey € 157,90
4025066088157 clear € 157,90
63232869 Mounting kit for € 99,90
R1150GS Adv.

V-Stream Windshield
The “V-Stream” windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonate which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it.
Windshield V-Stream, light grey, with homologation.

If you want to install it on a BMW R1150GS Adv., you

need two original items from the BMW R1150GS.

ArtNo. Description Price

115109 Height 46 cm, Width 46 cm € 199,95
Z2240 Height 55 cm, Width 47 cm € 229,90
63232869 Mounting kit for € 99,90
R1150GS Adv.

134
 Windscreen Adventure
The „V-Stream“ windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonate which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it.
Windshield V-Stream, with homologation and mounting.

ArtNo. Description Price

Z2422 Clear, Height 58cm, Width € 399,90
50cm
Z2423 Light grey, Height 51cm, Width € 369,00
46cm
LED turning signal
Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate.
It is a complete turning signal and has a homologation-
which makes it the first road legal LED for BMW bikes!
The LEDs flash yellow. Sold in pairs.
ArtNo. Description Price
0917 1 pair with clear lenses € 84,95
0917-g 1 pair with grey lenses € 84,95

Clear taillight lens

Complete taillight with integrated LED-board for simple
exchange! Road legal.
For BMW R850/1100/1150GS & Adv.
For models with and without ABS or Int.ABS.

ArtNo. Description Price

WLL-69-L LED Taillight clear € 99,90
WL-69 Taillight lens clear € 54,90
WLL-69-S Taillight lens grey € 55,50

www.mhornig.com 135
R 850 - 1100 - 1150 GS & ADVENTURE

136
 Indicator lens
These clear indicator lenses give your BMW
a quite sporty look.
Supplied as pairs, but if you want also as single items.
Amber bulbs included!

ArtNo. Description Price

L30103 1 set clear indicator lens € 25,80
L30103-g 1 set grey indicator lens € 25,90

Twin Tone Horn R1150GS & Adv.

This horn ensures with its 123,5 db that you get the
necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU.
We offer also a mounting kit for the horn. This mounting
kit consists of a stainless steel mounting fitting for your
BMW R1150GS and the necessaty ready-to-install wiring.
Horn: 12V 14A (non-stop operation),
height 12cm; width 13cm; depth 8cm.

ArtNo. Description Price

11690120 Twin Tone Horn € 44,80
1690120R1150GS Mounting and wir- € 46,00
ing (without horn)

Wolo Very Loud Horn R1150GS

This horn ensures with its 115 db that you get the neces-
sary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm;
diameter 8,5cm.

ArtNo. Description Price

TM80BMW Wolo Very Loud Horn and € 69,90
wiring

www.mhornig.com 137
R 850 - 1100 - 1150 GS & ADVENTURE

Beak enlargement
Award your R1150GS a very sporty and
distinctive offroad look with this beak enlargement
as well as much better mud protection.
It is very easy to install. The fastening kit is not included.

ArtNo. Description Price

7664390 Beak enlargement € 58,90
ha-7664390 Fastening for the Beak € 7,80

Carbon Rear Hugger

Provides ultimate protection for the rear shock absorber!
Spend less time for cleaning and more time for riding!
The best fit possible is provided by an aluminium
fastener.
With ABE.

ArtNo. Description Price

110310 Rear Hugger € 299,90

Dash pad
Dash pad in carbon look. Protects this very visible part of
your bike from key scratches and enhances its
appearance. Scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80071 Dash pad large € 16,90
80070 Dash pad small € 7,50

138
How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 139
R 850 - 1100 - 1150 R & ROCKSTER

R850/1100/1150R & Rockster

built since 1994
848/1085/1130 ccm cylinder capacity
power: 70/90/98 PS
max. torque 77/95/100 Nm

140
 GPS Mounting R850R & R1150R NH 1/3 sw 22
Handlebar mounting for 22mm handlebars + RAM-ball
with M10 x 1,25 thread; CNC-machined for TomTom and
Garmin Zumo GPS devices.
RAM-ball mount may be used for many other items, too.

ArtNo. Description Price

NH 1/3 sw 22 GPS mounting without € 44,95
hinge, polished
NH 2/1 sw 22 GPS mounting with € 79,95
hinge, black

GPS Mounting for BMW R850R, R1100R,

R1150R & Rockster
You screw the GPS ball into the upper triple clamp. The
screw is 55/60/65mm long, with a M8 thread. Then you
can mount many different GPS mounts to it, for example
RAM-mounts or the mounts we offer in our category
„Navigation and Communication“.

ArtNo. Description Price

NH 1-10 GPS Mounting € 24,95

www.mhornig.com 141
R 850 - 1100 - 1150 R & ROCKSTER
Camshaft lid
Made of high-quality aluminium and fits all four valve
twins as a replacement for the original plastic cap.
The delivery occurs as a set of two caps
with the o-rings and screws.

ArtNo. Description Price

0360 1 set anodized € 35,00
60010 S/S Round Head Screws € 0,42
(you need 4 screws)

Telelever end caps

These telelever end caps add a new optical highlight
to your BMW.
Nice form and robust material.
Always sold as a set in anodized version.

ArtNo. Description Price

0290 1 set anodized € 30,50

Swing arm pivot cover

These covers are the perfect replacement for the original
plastic caps. Made of aluminium.
Supplied as a pair.

Fits the R850R from MY 2003 and

R1150R from MY 2001.

ArtNo. Description Price

0430 1 set anodized € 22,90

Fork tube cover

Nice looking cover for the fork tube which works as a
replacement for all plastic caps,
kept firmly in place by an o-ring.
In order to replace all plastic caps you get
2 covers in a set.

ArtNo. Description Price

0220 1 set anodized € 24,90
0221 1 set black anodized € 24,95

142
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Mirror Heightening
Our mirror heightenings are the perfect solution, if you
mainly see your shoulders in the rear mirrors. The mirrors
will be moved 2,5 centimeters (R1150R) or 3,0 centime-
ters (R850/1100R) upwards which creates the necessary
space in order to improve the view to the back.

ArtNo. Description Price

BK 00 1 set mirror risers € 19,90
R1150R, R850R 2002-
2007
BK 00lr 1 set mirror risers € 19,95
R1100R and
R850R MY -2000

Rear wheel centre cover

A cover made of aluminium with emblem.
The mounting is quite easy: just put it into the hole of the
wheel. Perfect fit is guaranteed by an o-ring.

There are different drillings in the 5-spoke aluminium

wheel (please measure!).

ArtNo. Description Price

0-300-1 Size 32,3 anodized € 21,95
0-301-1 Size 30,5 anodized € 21,95
0-303-1 Size 31,8 anodized € 21,95

www.mhornig.com 143
R 850 - 1100 - 1150 R & ROCKSTER
Brake pedal enlargement
This brake pedal enlargement is nicely machined of
aluminium, knurled and anodized.
It is quite simple to install - just slip it on and lock in
place with a set-screw. Length: circa 5,5cm, diameter:
circa 2,4cm.
Fit for R850/1100R until 02 models.

ArtNo. Description Price

0100 Brake pedal enlargement € 28,90

Brake pedal enlargement

Nicely machined aluminium, knurled and natural
anodized.
This enlargement simply slips on and is held in place with
a set-screw. Length: circa 5,5cm, Diameter: circa 2,4cm

Suitable for: R1150R, R850/1100R since 03 models.

ArtNo. Description Price

0180 Brake pedal enlargement € 24,50

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0240 anodized € 25,90
0055 black anodized € 26,90
10011 O-ring € 1,20

Oil filler plug

This oil filler plug with Allen tool looks absolutely great
because of its finish and has good function as a locking
plug. Use a size 5 Allen key (usually found in your BMW
toolkit) in order to fit and remove.

ArtNo. Description Price

0010 anodized € 23,90
0020 black anodized € 24,30
10011 O-ring € 1,20

144
 Centre cap top yoke
This part is an optical improvement for your top yoke as it
is made of robust aluminium with an emblem.
An integrated o-ring ensures a snug fit.

ArtNo. Description Price

0260 anodized € 25,90
0262 black anodized € 23,90
0265 anodized (without emblem) € 20,80

Stainless Steel Crash bars

These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!

ArtNo. Description Price

Z7105 Stainless Steel Crash bars € 309,90
For:
BMW R850R
BMW R1100R 95-03
BMW R1150R 01-06

Bar risers R850R (-2002) & R1100R

This part will raise your handlebars for 25mm, creating
a more comfortable riding position, while enhancing the
overall handling of your bike. A longer brake line is not
needed when installing these bar risers.
Set consisting of the bar risers and fitting screws.
Does not fit for bikes with switches on the handle bar and
not for tubular handlebars!
ArtNo. Description Price
0420 1 set anodized € 92,90

www.mhornig.com 145
R 850 - 1100 - 1150 R & ROCKSTER
Handlebar Risers with tube handle bar
Handlebars rise by 25 mm for R850/1100/1150R
- For an upright and relaxed riding position
- Less strain on shoulders and wrists
- For sport bikes: Better standing, less exhaustive riding
- EG/ABE street homologation
When using the original BMW fog lamps, you also need
our special screw-set (040-0272).
ArtNo. Description Price
040-0265 Handlebar risers black 25mm € 52,90
610-0010 Handlebar risers silver 25mm € 52,90
040-0272 Special screw-set € 19,90

Short Paralever strut

This paralever (length 365mm) strut is made of high-qua-
lity steel and is 20mm shorter than the original one. You
can shorten the wheel base which improves the handling
of your bike eminently. The rear end of the bike will be a
little bit higher than before. R850R & R1100R.

ArtNo. Description Price

2314179 Short Paralever strut € 144,90

Foot brake fluid reservoir cover

Cover for the foot brake fluid reservoir, CNC-machined of
aluminium.
Image shows K1200R.
It is also visible on: R850/1100R.

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your R 1150 R & Rockster model
(not R 850 R). The crash bars are designed to be very
robust and allow for an equal distribution of forces in
a crash. You and your bike are protected in the best
possible way.
Crash bars offer a very good protection, but they can
reduce the cornering angle.

ArtNo. Description Price

SBL.07.344.100 Crash bars € 219,95

146
 LED headlights
Our clear glass LED headlights are designed for a simple
replacement of the original part and distinguishes itself
by a reduced energy consumption (16W low beam / 18W
high beam) which relieves the alternator.
The headlights supply pure white light and have a chro-
med metal housing. The product has the functions high
beam, low beam and parking light and will be delivered
including all illuminants and an original plug.
With E test mark.

BMW R850R (all construction years)

BMW R1150R (all construction years)
BMW R1100R (Facelift)

ArtNo. Description Price

WL-FS-01-C-L LED headlights € 199,90

www.mhornig.com 147
R 850 - 1100 - 1150 R & ROCKSTER
S/S screws
Brake fluid reservoir & clutch reservoir
get a new look with these 4x S/S screws.
70070: For all (elderly) bikes with a hydraulic brake
and no hydraulic clutch.
70075: For all (newer) bikes with a hydraulic brake
and a hydraulic clutch.

ArtNo. Description Price

70070 4 x M5x16 € 3,95
70075 4 x M4x16 € 3,95

Paralever pivot cap

Effective prevention of dirt is guaranteed by this paralever
pivot cap.
Highest quality and a perfect look, anodized aluminium.

ArtNo. Description Price

0070 anodized € 13,90

Chrome cap I
The chrome caps for the gear oil filler screw are an optical
improvement for your BMW.
You simply push them on. The caps fit into the gear oil
filler screw with Allen head and will fit any other screws
with the same Allen size.

ArtNo. Description Price

0500 Big chrome caps € 4,50
0501 Small chrome caps € 4,20

Chrome cap II
Chrome cap II was created for covering the
gear oil filler screw.
Like cap I it is just pushed on and fits perfectly.

ArtNo. Description Price

0502 Chrome cap II € 4,40

148
 Sidestand foot enlargement
Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.
Fits R 850/1100/1150R.

ArtNo. Description Price

0709 Sidestand foot enlargement € 29,80
70033 Extra screws € 3,95

Key holder with emblem

Useful key holder made of knurled aluminium, polished
on top, with our emblem.
Just slot in the „emergency key“ and fix with a set-screw.
0076 : Also possible to hook in a carabineer.

ArtNo. Description Price

0075 polished without eye € 21,90
0076 polished with eye € 29,95

S-Lifter
Our front lifter fits for BMW R1150R, Rockster.
Only useable without an engine spoiler.
It is perfect for care, overwintering, changing wheels
and servicing.
Made of steel, zinc-plated and quality
„Made in Germany“.
ArtNo. Description Price
BSL S-Lifter € 79,90

Stainless steel end weight

These end weights are made of stainless steel and create
a noble look for your bike. Included are two S/S-end
weights and two S/S-countersunk screws M8 for fixing.
Fits for: BMW R 850/1100/1150R.

ArtNo. Description Price

0451 1 set stainless steel € 39,90
end weights

www.mhornig.com 149
R 850 - 1100 - 1150 R & ROCKSTER
Clear lens + LED
Far brighter than the standard set-up!
Fitted in seconds by anyone.
Features red high-intensity LEDs.
Fits for R1150R.

ArtNo. Description Price

40106-01 Without Integral ABS € 84,95
40106-02 With integral ABS € 89,95
(only without cruise
control!)

Dash pad
Dash pad in carbon look - protects this very visible
part of your bike from key scratches and enhances its
appearance. Scratch resistant, self adhesive pad. R850R
1994-1999 & R1100R.

ArtNo. Description Price

80060 Dash Pad € 8,30

Clear taillight lens

Complete taillight with integrated LED-board for simple
exchange! Road legal.
For BMW R850/1100R.
For models with and without ABS or Int.ABS.

ArtNo. Description Price

WLL-69-L LED Taillight clear € 99,90
WL-69 Taillight lens clear € 54,90
WLL-69-S Taillight lens grey € 55,50

Indicator lens
These indicator lenses give your BMW
a quite sporty look.
Supplied as pairs, but if you want also as single items.
Amber bulbs included!

ArtNo. Description Price

L30103 1 set clear indicator lens € 25,80
L30103-g 1 set grey indicator lens € 25,90

150
 LED turning signal
Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate.
It is a complete turning signal and has a homologation
which makes it the first road legal LED for BMW bikes!
The LEDs flash yellow. Sold in pairs.

ArtNo. Description Price

0917 1 pair with clear lenses € 84,95
0917-g 1 pair with grey lenses € 84,95

You can find

s
more accessorie
w w w.m ho rn ig .c om

www.mhornig.com 151
R 850 - 1100 - 1150 R & ROCKSTER
Varioscreen
The windscreen Varioscreen is produced and tailored
precisely. All screens are forwarded with the exact
mounting (handlebar mount). However, screens
and mountings are also available separately.
Varioscreen windscreens feature a two-piece construction
with a two-point handlebar mount for naked bikes and
cruisers. The upper portion of the windscreen can be
adjusted (+/- 2 inches) to various heights to suit the
rider‘s taste and smooth out airflow.
Available in clear or smoke grey.

ArtNo. Description Price

For R850R *-2000 and R1100R
VNBr1100r-k Vario screen clear € 178,80
VNBr1100r-rg Vario screen smoke grey € 178,80
For R850R 2001-* and R1150R
VNB-boxer-k Varioscreen clear € 178,80
VNB-boxer-rg Varioscreen smoke grey € 178,80

152
 Roadshield
The windscreen Roadshield is produced and tailored
precisely. All screens are forwarded with the exact
mounting (handlebar mount).
However, screens and mountings are also available
separately.
ArtNo. Description Price
For R850R *-2000 and R1100R
ROr1100r-k Roadshield clear € 103,80
ROr1100r-rg Roadshield smoke grey € 103,80
For R850R 2001-* and R1150R
RO-boxer-k Roadshield clear € 103,80
RO-boxer-rg Roadshield smoke grey € 103,90

Highwayshield
The windscreen Highwayshield is produced and tailored
precisely. All screens are forwarded with the exact
mounting (handlebar mount).
However, screens and mountings are also available
separately.
ArtNo. Description Price
For R850R *-2000 and R1100R
HIr1100r-k Highwayshield clear € 119,80
HIr1100r-rg Highwayshield smoke grey € 119,80
For R850R 2001-* and R1150R
HI-boxer-k Highwayshield clear € 119,80
HI-boxer-rg Highwayshield smoke grey € 119,80

Customshield
The windscreen Customshield is produced and tailored
precisely. All screens are forwarded with the exact
mounting (handlebar mount).
However, screens and mountings are also available
separately.
ArtNo. Description Price
For R850R *-2000 and R1100R
CUr1100r-k Customshield clear € 114,80
CUr1100r-rg Customshield smoke grey € 114,80
For R850R 2001-* and R1150R
CU-boxer-k Customshield clear € 114,80
CU-boxer-rg Customshield smoke grey € 114,80

www.mhornig.com 153
R 850 - 1100 - 1150 R & ROCKSTER

Dash pad
Dash pad in a sporty carbon look. Protects this very
visible part of your bike from key
scratches and enhances its appearance.
Scratch-resistant, self-adhesive pad.
For R850R with tube handle bar 2000-2007 and
R1150R.
(no. 80060 for R850/1100R).

ArtNo. Description Price

80090 Dash pad € 9,50

Carbon Front mudguard

It is perfectly customised for the R 850 R from 9/02 &
R 1150 R (not Rockster). With its widening in the back it
almost stops the water splashes.
Dirt and mud cannot stay at the front fender, because it
has no footbridges.
Weight: ca. 184 gram light, but very solid. Including ABE.
ArtNo. Description Price
110220 Front mudguard (front part) € 269,90
110221 Front mudguard (rear part) € 199,90
Get rid of that ugly plastic!

Carbon Rear Hugger

Provides ultimate protection for the rear shock absorber!
Spend less time for cleaning and more time for riding!
The best fit possible is provided by an aluminium
fastener.
With ABE.

ArtNo. Description Price

110310 Rear Hugger € 299,90

154
Wolo Very Loud Horn
This horn ensures with its 115 db that you get the necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small and easy to install. Because of its E-approval mark it is street
legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm; diameter 8,5cm.

ArtNo. Description Price

TM80BMW Horn and wiring BMW R850R 2003-2007 & R1150R € 69,90
TM80 Horn and support BMW R850R *-2002 & R1100R *-2001 € 49,90

Remus Revolution
R 1150 R 99 model or newer,
R 1150 R Rockster 03 model or newer.
Perfect look, quick and easy mounting, less weight, more
power, more torque, deep and throaty sound combined
with ABE (European homologation). Real riding pleasure!

Please use the original BMW heat protection (article

number 46542316611) on your case (if you use side
cases).

ArtNo. Description Price

For R1150R 99-* and R1150R Rockster 03-*
008102 087799 Slip-on, exhaust silencer, with EG/ABE, Aluminium € 465,00

www.mhornig.com 155
R 850 - 1100 - 1150 R & ROCKSTER

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

156
 Das aktuelle Programm:
Alle Reisen und Trainingsvorschau
Jetzt gratis bestellen!

PROGRAMM JETZT GRATIS BESTELLEN: MOTORRAD ACTION TEAM, 70162 STUTTGART

FAX 0711/182-2017 TEL. 0711/182-1977 E-MAIL INFO@ACTIONTEAM.DE » WWW.ACTIONTEAM.DE » ACTION TEAM AUF FACEBOOK

SPONSOREN: PARTNER:
R 850 - 1200 C & CL

R850/1200C R1200CL
built 1997-2001 / 1997-2005 built 2002-2005
848/1170 ccm cylinder capacity 1170 ccm cylinder capacity
power: 50/61 PS power: 61 PS
max. torque 71/98 Nm max. torque 98 Nm

158
Change front and rear seat
The driver‘s and pillion rider‘s seat are equipped with a fluting in order to release the tail bone. The seats were also
broadened for about 15mm. The padding consists of two layers, the upper one comfortably soft and the lower one avo-
ids denting. We especially took care of the pillion rider‘s comfort: Here, the seat is increased in the middle front part to
inhibit a cramped position. These alterations enable a tangible comfortable riding - free from pain. Also the vexatious
sliding when the driver brakes has an end now. The seats are are coated with slip resistant material.

Available in three heights

(please note in the comment with the article number):
1: like the original one
2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)
You must send
your seat
to us!

ArtNo. Description Price

sitzF-C Driver’s seat black € 239,00
sitzS Pillion’s seat black € 194,00
s-g Extra charge black-grey € 29,00
(for each seat)

www.mhornig.com 159
R 850 - 1200 C & CL
Oil filler plug with emblem
There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0040 polished € 25,90
0240 anodized € 25,90
0055 black anodized € 26,90
10011 O-ring € 1,20

Oil filler plug

This oil filler plug with Allen tool looks absolutely great
because of its finish and has good function as a locking
plug. Use a size 5 Allen key (usually found in your BMW
toolkit) in order to fit and remove.
ArtNo. Description Price
0030 polished € 24,90
0010 anodized € 23,90
0020 black anodized € 24,30
10011 O-ring € 1,20

Key holder with emblem

Useful key holder made of knurled aluminium, polished
on top, with our emblem.
Just slot in the „emergency key“ and fix with a set-screw.
0076 : Also possible to hook in a carabineer.

ArtNo. Description Price

0075 polished without eye € 21,90
0076 polished with eye € 29,95

Rear wheel hub cap

For spoke wheel; made of aluminium natural anodized
or polished: rear wheel hub cap with all parts needed to
fit it.
Fits for R850/1200C.
You can download a installation instruction online

ArtNo. Description Price

0150 polished € 41,80
0250 anodized € 43,90

160
 Rear wheel centre cover
A cover made of aluminium with emblem.
The mounting is quite easy: just put it into the hole of the
wheel. Perfect fit is guaranteed by an o-ring.

There are different drillings in the 5-spoke aluminium

wheel (please measure!).
ArtNo. Description Price
0-300-1 Size 32,3 anodized € 21,95
0-301-1 Size 30,5 anodized € 21,95
0-303-1 Size 31,8 anodized € 21,95
0-300-0 Size 32,3 polished € 21,90
0-301-0 Size 30,5 polished € 21,90
0-303-0 Size 31,8 polished € 21,90

Camshaft lid
Made of high-quality aluminium and fits all four valve
twins as a replacement for the original plastic cap.
The delivery occurs as a set of two caps
with the o-rings and screws.
ArtNo. Description Price
0160 1 set polished € 34,90
0360 1 set anodized € 35,00
60010 S/S Round Head Screws € 0,42
(you need 4 screws)

Telelever end caps

These telelever end caps add a new optical highlight
to your BMW.
Nice form and robust material.
Always sold as a set in polished or anodized version.

ArtNo. Description Price

0090 1 set polished € 33,80
0290 1 set anodized € 30,50

www.mhornig.com 161
R 850 - 1200 C & CL
Centre cap top yoke
Fits for R850/1200C. You can also use a BMW emblem.
It is made of high-quality aluminium and polished.
There is no visible difference between our polished and
cromiumplated parts. The advantage of our polished
products is their colour resistance. They will not change
their polished look even after extreme atmospheric condi-
tions. Another advantage of our polished parts is that no
cromium can flake off. Because of this we improved our
polishing methods and did without cromiumplating.
ArtNo. Description Price
0085 high polished € 28,90

Toolbox
Toolbox for R 850/1200 C until 2003 model.
The polished pipe is made of stainless steel with two
polished aluminium caps. It fills that void between the
rear mudguard and the rear shock and provides a
waterproof place for tools, maps or any other small
items. It bolts to the rear mudguard bracket on the frame
(screws included). The end cap unscrews and seals with
an o-ring. Not for models with suspension and hydraulic
preload adjustment.
ArtNo. Description Price
0230 high polished € 149,90

Swing arm Pivot Cover right

This swing arm pivot cover for the right side is a very nice
replacement for the original cover. Made of high-quality
aluminium and polished.
Fits for R850/1200C.

ArtNo. Description Price

0348 high polished with emblem € 27,95
0348-1 high polished without emblem € 27,90

Swing arm Pivot Cover left

Swing arm pivot cover for the left side.
Fits for R850/1200C.

ArtNo. Description Price

0349 high polished with emblem € 27,95
0349-1 high polished without emblem € 26,60

162
 Shift lever enlarger
It is nicely machined of aluminium and polished.
The special shape gives a very good grip.
Just lube up the rubber with a bit of soapy water
and slip it on. It will stay put.
Fits for R850/1200C & R1200CL bikes.

ArtNo. Description Price

0197 polished € 22,90
0397 polished with O-Rings € 24,90
for better grip and racing look

Kickstand
For BMW R 850/1200 C, Montauk, Independent and CL.
Perfectly suitable for removing the wheels.
Saves tyres in winter.
Very easy to store because of its removable bar end.

ArtNo. Description Price

cruiser07 Kickstand € 84,90

www.mhornig.com 163
R 850 - 1200 C & CL

Chrome cap I
The chrome caps for the gear oil filler screw are an optical
improvement for your BMW.
You simply push them on. The caps fit into the gear oil
filler screw with Allen head and will fit any other screws
with the same Allen size.

ArtNo. Description Price

0500 Big chrome caps € 4,50
0501 Small chrome caps € 4,20

Chrome cap II
Chrome cap II was created for covering the
gear oil filler screw.
Like cap I it is just pushed on and fits perfectly.

ArtNo. Description Price

0502 Chrome cap II € 4,40

S/S screws
Brake fluid reservoir & clutch reservoir
get a new look with these 4x S/S screws.
70070: For all (elderly) bikes with a hydraulic brake
and no hydraulic clutch.
70075: For all (newer) bikes with a hydraulic brake
and a hydraulic clutch.

ArtNo. Description Price

70070 4 x M5x16 € 3,95
70075 4 x M4x16 € 3,95

Paralever pivot cap

Effective prevention of dirt is guaranteed by this paralever
pivot cap.
Highest quality and a perfect look. Anodized aluminium.

ArtNo. Description Price

0070 anodized € 13,90

164
 Mirror Heightening
Our mirror heightenings are the perfect solution if you
mainly see your shoulders in the rear mirrors.
The mirrors will be moved 2,5 centimeters upwards which
creates the necessary space in order to improve the view
to the back.
Fit for R1200C.

ArtNo. Description Price

BK 00 Mirror Heightening € 19,90
1 set

Mirror-catch-cable
These cables are very easy to install and at the same
time very effective.
They protect the cables of the indicators and ensure that
they won‘t break, even in an accident.
You will save a lot of money as a new mirror for your bike
is not cheap.
Delivered as a set with fitting instructions.
Fit for R1200CL.

ArtNo. Description Price

0600 Mirror-catch-cable € 10,50
1 set

www.mhornig.com 165
R 850 - 1200 C & CL
GPS Mounting GPS Mounting
Bolt + RAM-ball. Handlebar mounting for 24mm or 28mm handlebars +
CNC-machined for TomTom and Garmin Zumo GPS de- RAM-ball with M10 x 1,25 thread;
vices. You can mount all RAM-mounts on the RAM-ball. CNC-machined for TomTom and Garmin Zumo GPS
Install the RAM-mount so that the navigation system devices. RAM-ball mount may be used for many other
comes to the centre of the handlebars! Otherwise, the items, too.
mirror is covered. See: Art-No. NH 3/1 Colour: Chrome
Colour: Black Fits for R1200C und R1200CL.
Fits for R1200CL.
ArtNo. Description Price ArtNo. Description Price
NH 1/5 GPS Mounting black € 33,95 NH 1/3 c 24 GPS Mounting 24mm € 45,95
NH 1/3 c 28 GPS Mounting 28mm € 79,95

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

166
 Indicator lenses front + Bulbs
Amber bulbs included, sold in pairs! Fits for R1200CL.

ArtNo. Description Price

WLB-47 1 set clear indicator lenses € 4190
WLB-47-S 1 set grey indicator lenses € 39,90

Indicator lens
These indicator lenses give your BMW
a quite sporty look.
Supplied as pairs, but if you want also as single items.
Amber bulbs included!

ArtNo. Description Price

L30103 1 set clear indicator lens € 25,80
L30103-g 1 set grey indicator lens € 25,90

Indicator bulb
Either orange or special coating. The special coated one
only lights orange when you use the indicator (usually
used with transparent lenses). Single.
BLWB
ArtNo. Description Price
BLWB orange 12V/21W € 2,95
BLWBT special coated € 9,90
12V/21W BLWBT

www.mhornig.com 167
R 850 - 1200 C & CL

LED indicators
LED turn signals with E-mark. The offset arrangement of
the high-performance LEDs, which glow yellow, allows
you to keep the overview even in the dark. The resistor
which is necessary for the operation of LED indicators has
already been mounted on the insert, keeping the blinking
frequency in its original state. Simply replace the original
indicator by the LED indicator. One indicator consists of
a LED plate and an indicator glass. Shipping includes
one set (two indicator glasses and two LED plates). The
original screws are used to fix the indicators.
BMW R850C, BMW R1200C, BMW R1200C Independent
& Montauk, BMW R1200CL (only rear)
ArtNo. Description Price
WLB-41-L-1 White LED indicators € 84,95
WLB-41-L-S-1 Grey LED indicators € 84,90

Varioscreen
The windscreen Varioscreen is produced and tailored pre-
cisely. All screens are forwarded with the exact mounting
(handlebar mount). However, screens and mountings are
also available separately.
Varioscreen windscreens feature a two-piece construction
with a two-point handlebar mount for naked bikes and
cruisers. The upper portion of the windscreen can be ad-
justed (+/- 2 inches) to various heights to suit the rider‘s
taste and smooth out airflow.
ArtNo. Description Price
For R850/1200C - handle bar diameter 24mm
VNB-boxer-k Varioscreen clear € 178,80
VNB-boxer-rg Varioscreen smoke grey € 178,80
For R850/1200C - handle bar diameter 28mm
VNBr1200c-k Varioscreen clear € 178,80
VNBr1200c-rg Varioscreen smoke grey € 178,80

168
 Roadshield
The windscreen Roadshield is produced and tailored
precisely. All screens are forwarded with the exact
mounting (handlebar mount). However, screens and
mountings are also available separately.

ArtNo. Description Price

For R850/1200C - handle bar diameter 24mm
RO-boxer-k Roadshield clear € 103,80
RO-boxer-rg Roadshield smoke grey € 103,80
For R850/1200C - handle bar diameter 28mm
ROr1200c-k Roadshield clear € 103,80
ROr1200c-rg Roadshield smoke grey € 103,80

Highwayshield
The windscreen Highwayshield is produced and tailored
precisely. All screens are forwarded with the exact
mounting (handlebar mount). However, screens and
mountings are also available separately.

ArtNo. Description Price

For R850/1200C - handle bar diameter 24mm
HI-boxer-k Highwayshield clear € 119,80
HI-boxer-rg Highwayshield smoke grey € 119,80
For R850/1200C - handle bar diameter 28mm
HIr1200c-k Highwayshield clear € 119,80
HIr1200c-rg Highwayshield smoke grey € 119,80

Customshield
The windscreen Customshield is produced and tailored
precisely. All screens are forwarded with the exact
mounting (handlebar mount). However, screens and
mountings are also available separately.

ArtNo. Description Price

For R850/1200C - handle bar diameter 24mm
CU-boxer-k Customshield clear € 114,80
CU-boxer-rg Customshield smoke grey € 114,80
For R850/1200C - handle bar diameter 28mm
CUr1200c-k Customshield clear € 114,80
CUr1200c-rg Customshield smoke grey € 114,80

www.mhornig.com 169
R 1100 - 1150 RT

R1100/1150RT
built from 1995 to 2001 / since 2001
1085/1130 ccm cylinder capacity
power: 90/98 PS
max. torque 95/100 Nm

170
 Change front and rear seat
The driver‘s and pillion rider‘s seat are equipped with a
fluting in order to release the tail bone. The seats were You must send
also broadened for about 15mm. your seat
The padding consists of two layers, the upper one comfor- to us!
tably soft and the lower one avoids denting. We especially
took care of the pillion rider‘s comfort:
Here, the seat is increased in the middle front part to
inhibit a cramped position.
These alterations enable a tangible comfortable riding -
free from pain. Also the vexatious sliding when the driver
brakes has an end now.
The seats are coated with slip resistant material.

Available in three heights

(please note in the comment with the article number):
1: like your original one
2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)

It is also possible to change a seat with heater. ArtNo. Description Price

Your seat gets altered - you have to send it in! sitzF Driver’s seat black € 199,00
The change takes about 2 weeks.
sitzS Pillion’s seat black € 194,00
s-g Extra charge black-grey € 29,00
(for each seat)

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 171
R 1100 - 1150 RT

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-Ring (4 pieces) € 2,80

Key holder with emblem

Useful key holder made of knurled aluminium, polished
on top, with our emblem.
Just slot in the „emergency key“ and fix with a set-screw.
0076 : Also possible to hook in a carabineer.
ArtNo. Description Price
0075 polished without eye € 21,90
0076 polished with eye € 29,95

Brake pedal enlargement

This brake pedal enlargement is nicely machined of
aluminium, knurled and anodized. It is quite simple to
install - just slip it on and lock in place with a set-screw.
Length: circa 5,5cm, diameter: circa 2,4cm.
ArtNo. Description Price
0100 Brake pedal enlargement € 28,90

172
 Oil filler plug with emblem
There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0240 anodized € 25,90
0055 black anodized € 26,90
10011 O-ring € 1,20

Oil filler plug

This oil filler plug with Allen tool looks absolutely great
because of its finish and has good function as a locking
plug. Use a size 5 Allen key (usually found in your BMW
toolkit) in order to fit and remove.

ArtNo. Description Price

0010 anodized € 23,90
0020 black anodized € 24,30
10011 O-ring € 1,20

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized. Easy to install.
ArtNo. Description Price
0709 Sidestand foot enlargement € 29,80
R1100RT
0716 Sidestand foot enlargement € 29,90
R1150RT

Stainless steel end weight

These end weights are made of stainless steel and create
a noble look for your bike. Included are two S/S-end
weights and two S/S-countersunk screws M8 for fixing.
Fits for R850/1100/1150RT.

ArtNo. Description Price

0451 1 set stainless steel € 39,90
end weights

www.mhornig.com 173
R 1100 - 1150 RT

Wolo Very Loud Horn

The Wolo Very Loud Horn ensures with its 115 db that
you get the necessary respect and that you won‘t be
overlooked. The horn is perfect for motorcycles because
it is small and easy to install. Because of its E-approval
mark it is street legal in the EU.
Wolo Very Loud Horn: 12V 6A (non-stop operation),
Height 7,5cm; Diameter 8,5cm

ArtNo. Description Price

TM80BM- Wolo Very Loud horn € 69,90
Wr11rt and wiring

Short Paralever strut

This paralever (length 365mm) strut is made of high-
quality steel and 20mm shorter than the original one.
Thereby you can shorten the wheel base which improves
the handling of your bike eminently. The rear end of the
bike will be a little bit higher than before.

ArtNo. Description Price

2314179 Short Paralever strut € 144,90

174
 Centre cap top yoke
This part is an optical improvement for your top yoke as it
is made of robust aluminium with an emblem.
An integrated o-ring ensures a snug fit.

ArtNo. Description Price

0260 anodized € 25,90
0262 black anodized € 23,90
0265 anodized (without emblem) € 20,80

Stainless Steel Crash bars

These stainless steel Engine Guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!

ArtNo. Description Price

Z7105 Stainless Steel Crash bars € 309,90
For:
BMW R850RT
BMW R1100RT 94-00
BMW R1150RT 01-04

Bar risers
This part will raise your handlebars for 25mm, creating
a more comfortable riding position, while enhancing the
overall handling of your bike. A longer brake line is not
needed when installing these bar risers.
Set consisting of the bar risers and fitting screws.
Does not fit for bikes with switches on the handle bar!

ArtNo. Description Price

0420 1 set anodized € 92,90

www.mhornig.com 175
R 1100 - 1150 RT
Oil cooler protection
Very good protection for your oil cooler, at the same
time a new highlight on your BMW. It is very precisely
formed in order to stay in place without flutter. The front
fairing has to be removed in order to install it. Installation
manual included.
ArtNo. Description Price
0601 Oil cooler protection R1100RT € 26,90
0602 Oil cooler protection R1150RT € 27,90
s10ml Silicone 10ml € 0,95

Speedometer trim
These rings for your speedometer and your rev counter are
an optical improvement for your GS, RT or RS. Just stick
on with glue or some silicone. May be removed without
residue. Consists of a set of both rings.

ArtNo. Description Price

0401 1 set anodized € 49,90
s2ml Silicone 2ml € 0,75

Screen attachment
This part is a replacement for the original plastic part.
It is made of high-quality anodized aluminium and will be
sent with the matching stainless steel screws.
Not suitable for the V-Stream windshield.

ArtNo. Description Price

W.8161265 1 set anodized € 54,40

Telelever end caps

These telelever end caps add a new optical highlight
to your BMW.
Nice form and robust material.
Always sold as a set in anodized version.

ArtNo. Description Price

0290 1 set anodized € 30,50

176
 Camshaft lid
Made of high-quality aluminium and fits all four valve
twins as a replacement for the original plastic cap.
The delivery occurs as a set of two caps
with the o-rings and screws.

ArtNo. Description Price

0360 1 set anodized € 35,00
60010 S/S Round Head Screws € 0,42
(you need 4 screws)

Paralever pivot cap

Effective prevention of dirt is guaranteed by this paralever
pivot cap.
Highest quality and a perfect look anodized aluminium.

ArtNo. Description Price

0070 anodized € 13,90

Hardware kit
Hardware kit consisting of 55 S/S screws. These stainless
and polished screws look great and remain that way for
years. Complete set with all screws needed
and mounting guidelines.
ArtNo. Description Price
70010 Hardware kit R850/1100RT € 24,60
70020 Hardware kit R1150RT € 24,80
0421005 transp.Shim Ø 5,3mm € 0,17
0421006 transp.Shim Ø 6,4mm € 0,15

S/S screws
Brake fluid reservoir & clutch reservoir
get a new look with these 4x S/S screws.
70070: For all (elderly) bikes with a hydraulic brake
and no hydraulic clutch.
70075: For all (newer) bikes with a hydraulic brake
and a hydraulic clutch.
ArtNo. Description Price
70070 4 x M5x16 € 3,95
70075 4 x M4x16 € 3,95

www.mhornig.com 177
R 1100 - 1150 RT

Chrome cap I
The chrome caps for the gear oil filler screw are an optical
improvement for your BMW.
You simply push them on. The caps fit into the gear oil
filler screw with Allen head and will fit any other screws
with the same Allen size.

ArtNo. Description Price

0500 Big chrome caps € 4,50
0501 Small chrome caps € 4,20

Chrome cap II
Chrome cap II was created for covering the
gear oil filler screw.
Like cap I it is just pushed on and fits perfectly.

ArtNo. Description Price

0502 Chrome cap II € 4,40

Chrome cap III

The chrome cap III for the light adjustment will give your
BMW another additional highlight.
The installation is as easy as effective - just stick it on
with some glue like Uhu or silicone.

ArtNo. Description Price

0505 Chrome cap III € 4,90
s2ml Silicone 2ml € 0,75

Chrome cap IV
The chrome cap IV fits into the screw for the speedometer
adjustment. This cap also - as the other chrome caps -
makes your BMW more pleasing.
The mounting works the same way as with the other
chrome caps.
ArtNo. Description Price
0507 Chrome cap IV € 4,60
s2ml Silicone 2ml € 0,75

178
 Mirror-catch-cable
These cables are very easy to install and at the same
time very effective.
They protect the cables to the indicators and ensure that
they will not break, even in an accident.
You will save a lot of money as a new mirror for
your bike is not cheap.
Delivered as a set with fitting instructions.
Fits for R1100/1150RT.

ArtNo. Description Price

0600 Mirror-catch-cable € 10,50
1 Set

Dash pad
Dash pad in carbon look. Protects this very visible part
of your bike from key scratches and enhances its appea-
rance. Scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80060 Dash pad € 8,30

www.mhornig.com 179
R 1100 - 1150 RT
GPS Mounting
Fast, easy mounting is possible with our new GPS mount for BMW R1100, 1150RT. The windscreen can still be used in
all positions and you can always read your GPS without looking away from the street.

No vibrations!
For all BMW Navigators and Garmin SPIII, SP26**, 2720, Zumo 550, Zumo 590, Zumo 595, Zumo 660 and Nüvi
series.
SP26** & 2720 owners need the Garmin motorcycle mount.
The TomTom Navigator can also be mounted with the correct adapter.

R1100RT R1150RT
ArtNo. Description Price
44005 GPS Mounting R850RT (1996-2001) & R1100RT € 74,90
44006 GPS Mounting R850RT (2002-2006) & R1150RT € 79,90
ZumoAd340-350 Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom € 15,90
400, 410, 420, 450, 500 & 550, Incl. screws for mounting in the GPS mount
and the TomTom holder.
ram-1zoll Adapter for 1” RAM-ball € 34,90

Indicator lenses front + Bulbs

Amber bulbs included, sold in pairs!
Fits for BMW R1100/1150RT.

ArtNo. Description Price

WLB-47 1 Set clear indicator lenses € 41,90
WLB-47-S 1 Set grey indicator lenses € 39,90

Indicator bulb
Either orange or special coating. The special coated one
only lights orange when you use the indicator (usually
used with transparent lenses). Single.
BLWB
ArtNo. Description Price
BLWB orange 12V/21W € 2,95
BLWBT BLWBT special coated 12V/21W € 9,90

180
 Windscreen
R850RT (1996-2001) & R1100RT
The „V-Stream“ windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonate which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it.
Windshield V-Stream, clear, with homologation.

ArtNo. Description Price

115113 Height 43cm, Width 55cm € 219,95
Z2458 Height 48cm, Width 56cm € 269,90

Windscreen
R850RT (2002-2006) & R1150RT
The „V-Stream“ windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonate which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it.
Windshield V-Stream, clear, with homologation.

ArtNo. Description Price

115100 Height 43cm, Width 55cm € 199,95
Z2456 Height 48cm, Width 56cm € 269,90

Windscreen
This transparent windscreen with edge protection
fits your R 1100 and 1150 RT.
Size (H x W x T): 480mm x 508mm x 6mm
Height measured from the bottom edge.
Will be installed like the original screen.

ArtNo. Description Price

D241STG Windscreen € 112,90

www.mhornig.com 181
R 1100 - 1150 RT
Twin Tone Horn
This horn ensures with its 123,5 db that you get the
necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU.
We offer also a mounting kit for the horn. This mounting
kit consists of a stainless steel mounting fitting for your
BMW R1100RT & R1150RT and the necessary ready-to-
install wiring.
Horn: 12V 14A (non-stop operation),
height 12cm; width 13cm; depth 8cm.

ArtNo. Description Price

11690120 Twin Tone Horn € 44,80
11690120r11rt Mounting and wir- € 47,00
ing (without horn)

LED Rear Light

This LED rear light for BMW R1100RT and R1150RT is
available in clear and grey. The rear light is E-homologated
and road legal. A white license plate illumination is
included. The original rear light will simply be exchanged.
The installation is easy and fast.

ArtNo. Description Price

WLL-470-L clear, R1100RT, € 149,90
R1150RT
WLL-470-L-S grey, R1100RT, € 159,90
R1150RT

LED turning signal

These LED front indicators are available as a set for the
left and right side in clear or grey with optional daytime
running light (side light). You just replace the original
turning signals with these LEDs. Resistors for the correct
flashing rate are included.
With E-approval mark!
1 set = 2 LED indicators (left and right).

ArtNo. Description Price

WLB-47-L 1 pair of LED turning sig- € 99,90
nals with clear lenses
WLB-47-L-S 1 pair of LED turning € 99,90
signals with grey lenses

182
 INTERMOT
KÖLN, 06.–11.10.2020
OFFEN FÜR ALLE: 08.–11.10.2020

IT’S ALL RIDE

#INTERMOT2020

WWW.INTERMOT.DE
R 1100 S & R 1100 RS & R 1150 RS

R1100S
built since: 1998
1085 ccm cylinder capacity
power: 98 PS/72 KW at 7.500 U/min
max. torque 97/Nm at 5.750 U/min

184
 R1100RS R1500RS
built from 1993 to 2001 built from 2001 to 2004
1085 ccm cylinder capacity 1130 ccm cylinder capacity
power: 90 PS power: 95 PS
max. torque 95 Nm max. torque 100 Nm

www.mhornig.com 185
R 1100 S & R 1100 RS & R 1150 RS
Number plate mounting R1100S
Our very light and shapely number plate mounting is
made of aluminium and black coated.
Incl. pre-assembled number plate light, adapter plate,
small, colour-coordinated LED turning signals and a
reflector which can be left off.
Flash-Killer (you need 2 of them).
The power resistance for mini-indicators realized an exact
power consumption to 21 watt. Does not fit for the Laser
sport exhaust of the R1100S Boxer Cup Replica model!

ArtNo. Description Price

33004 Black aluminium alloy € 279,80
123952 Flash-Killer € 12,95

Rear wheel centre cover

A cover made of aluminium with emblem.
The mounting is quite easy: just put it into the hole of the
wheel. Perfect fit is guaranteed by an o-ring.
There are different drillings in the 5-spoke aluminium
wheel (please measure!).
BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0-300-1 Size 32,3 anodized € 21,95
0-301-1 Size 30,5 anodized € 21,95
0-303-1 Size 31,8 anodized € 21,95

186
 Short Paralever strut
This paralever (length 365mm) strut is made of high-
quality steel and is 20mm shorter than the original one.
Thereby you can shorten the wheel base which improves
the handling of your bike eminently. The rear end of the
bike will be a little bit higher than before.
BMW R1100S, R1100RS, R1150RS.
ArtNo. Description Price
2314179 Short Paralever strut € 144,90

Camshaft lid
Made of high-quality aluminium and fits all four valve
twins as a replacement for the original plastic cap. The
delivery occurs as a set of two caps with the o-rings and
screws. BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0360 1 set anodized € 35,00
60010 S/S Round Head Screws € 0,42
(you need 4 screws)

Telelever end caps

These telelever end caps add a new optical highlight
to your BMW. Nice form and robust material.
Always sold as a set in anodized version. BMW R1100S,
R1100RS, R1150RS.

ArtNo. Description Price

0290 1 set anodized € 30,50

Key holder with emblem

Useful key holder made of knurled aluminium, polished
on top, with our emblem.
Just slot in the „emergency key“ and fix with a set-screw.
0076 : Also possible to hook in a carabineer.
BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0075 polished without eye € 21,90
0076 polished with eye € 29,95

www.mhornig.com 187
R 1100 S & R 1100 RS & R 1150 RS

Brake pedal enlargement

Nicely machined aluminium, knurled and natural
anodized.
This enlargement simply slips on and is held in place
with a set-screw. Length: circa 5,5cm, Diameter: circa
2,4cm. BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0180 anodized € 24,50

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found
in your BMW toolkit) in order to fit and remove it. BMW
R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0240 anodized € 25,90
0055 black anodized € 26,90
10011 O-ring € 1,20

Oil filler plug

This oil filler plug with Allen tool looks absolutely great
because of its finish and has good function as a locking
plug. Use a size 5 Allen key (usually found in your
BMW toolkit) in order to fit and remove. BMW R1100S,
R1100RS, R1150RS.

ArtNo. Description Price

0010 anodized € 23,90
0020 black anodized € 24,30
10011 O-ring € 1,20

Stainless steel end weight R1100S

These end weights are made of stainless steel and create
a more noble look for your bike and less vibration. In-
cluded in delivery are two S/S end weights and two S/S
countersunk screws for fixing.

ArtNo. Description Price

05382 Stainless steel € 39,90
end weight polished

188
 GPS Mounting R1100S
Bolt + RAM-ball.
CNC-machined, for TomTom and Garmin Zumo GPS de-
vices. You can mount all RAM-mounts on the RAM-ball.
Install the RAM-mount so that the navigation system
comes to the centre of the handlebars! Otherwise, the
mirror is covered. See: Art-No. NH 3/1
Colour: Black

ArtNo. Description Price

NH 1/5 GPS Mounting black € 33,95

GPS or Cam Mounting R1100S

RAM-ball and mounting are CNC-machined for TomTom
and Garmin Zumo GPS devices.
You can mount all RAM-mounts onto the RAM-ball.
If you want to install our GPS and cam mounting like
you can see it on the pictures you just need a longer
screw.
The hole in our mounting is 10,5mm large.

ArtNo. Description Price

NH 1/8 GPS or Cam Mounting € 29,95

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. BMW
R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-Ring (4 pieces) € 2,80

www.mhornig.com 189
R 1100 S & R 1100 RS & R 1150 RS

Mirror Extensions R1100S

Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors. The mirrors will
be moved a few centimetres outwards in order to improve
the view to the rear. Not with Superbike handlebars.

ArtNo. Description Price

BK 04 Mirror extensions € 62,90
1 set

Oil cooler screens R1100S

These stainless steel screens protect the oil cooler from
stones, flies and other debris.
They are very easy to install and give your R1100S an
even more sporty appearance.

ArtNo. Description Price

0605 anodized € 20,90
0605-s black anodized € 25,90

Paralever pivot cap

Effective prevention of dirt is guaranteed by this paralever
pivot cap.
Highest quality and a perfect look. Anodized aluminium.
BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0070 anodized € 13,90

S/S screws
Brake fluid reservoir & clutch reservoir
get a new look with these 4x S/S screws.
70070: For all (elderly) bikes with a hydraulic brake
and no hydraulic clutch.
70075: For all (newer) bikes with a hydraulic brake
and a hydraulic clutch.
BMW R1100S, R1100RS, R1150RS.
ArtNo. Description Price
70070 4 x M5x16 € 3,95
70075 4 x M4x16 € 3,95

190
 Chrome cap I
The chrome caps for the gear oil filler screw are an optical
improvement for your BMW.
You simply push them on. The caps fit into the gear oil fil-
ler screw with Allen head and will fit any other screws with
the same Allen size. BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0500 Big chrome caps € 4,50
0501 Small chrome caps € 4,20

Chrome cap II
Chrome cap II was created for covering the
gear oil filler screw.
Like cap I it is just pushed on and fits perfectly.
BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

0502 Chrome cap II € 4,40

Chrome cap V
The chrome cap V for the speedometer adjustment is an
optical improvement for your BMW.
You simply stick it on e.g. with Uhu or silicone.
If you have no silicone at home you can also order our
high-quality silicone which is pre-filled in the volume you
need and easy to dose.
BMW R1100S, R1100RS, R1150RS.
ArtNo. Description Price
0508 Chrome cap V € 1,95
s2ml Silicone 2ml € 0,75

Hardware kit R1100S

The original black screws on your motorcycle fairing lose a
little bit of crispness each time they are screwed in or out.
These stainless and polished screws look great and
remain that way for years.
This is the complete kit for all screws, with mounting
instruction, for all R1100S.
ArtNo. Description Price
70030 R1100S € 18,90
0421005 transp.Shim Ø 5,3mm € 0,17
0421006 transp.Shim Ø 6,4mm € 0,15

www.mhornig.com 191
R 1100 S & R 1100 RS & R 1150 RS
Stainless Steel Crash bars
These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!

ArtNo. Description Price

Z7105 Stainless Steel Crash bars € 309,90

Fits for:
BMW R1100S 98-05
BMW R1100RS 93-00
BMW R1150RS 01-04

Clear indicator lens front R1100S

Clear indicator lens for R1100S with special orange
coated bulbs. Sold as singles.

ArtNo. Description Price

7658967 for the left side € 62,90
7658968 for the right side € 62,90

Indicator bulb
Either orange or special coating. The special coated one
only lights orange when you use the indicator (usually
used with transparent lenses). Single.

BLWB ArtNo. Description Price

BLWB orange 12V/21W € 2,95
BLWBT BLWBT special coated 12V/21W € 9,90

192
 LED turning signal R1100S
Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate.
It is a complete turning signal and has a homologation-
which makes it the first road legal LED for BMW bikes!
The LEDs flash yellow. Sold in pairs.
ArtNo. Description Price
0917 1 pair with clear lenses € 84,95
0917-g 1 pair with grey lenses € 84,95

Indicator lens rear R1100S

These clear indicator lenses give your BMW
a quite sporty look.
Supplied as pairs, but if you want also as single items.
Amber bulbs included!

ArtNo. Description Price

L30103 1 set clear indicator lens € 25,80
L30103-g 1 set grey indicator lens € 25,90

LED turning signals front R1100S

These LED indicators for the front of the BMW R1100S
are sold as a pair and are available in clear or black.
They include the position light (parking light). The original
indicators are simply replaced by these LED indicators.
The necessary electronic indicator relay is included in
the shipment and has to be used for installation. With
E-mark. 1 set = 2 LED indicators (for the left and the right
side) with relay WLR-05.
ArtNo. Description Price
WLB-242-L 1 pair, clear € 133,90
WLB-242-L-S 1 pair, black € 134,90

LED Taillight R1100S

Complete taillight with integrated LED-board for simple
exchange! Road legal.
For bikes with and without ABS (Int. ABS).

ArtNo. Description Price

WLL-53-L clear LED Taillight € 99,90

www.mhornig.com 193
R 1100 S & R 1100 RS & R 1150 RS

Carbon Rear Hugger R1100S

Provides ultimate protection for the rear shock absorber.
The best fit possible is provided by an aluminium
fastener.
Spend less time for cleaning and more time for riding!
With ABE.

ArtNo. Description Price

010.10.12 Rear Hugger € 299,90

Mirror Covers R1100S

If you remove the mirrors of your BMW R1100S and
mount mirrors onto the handle bar (like R1100S Boxer-
Cup Replika) you will have two holes in the fairing.
You can cover these holes with our GRP (primed) or
carbon fiber mirror covers.
Supplied as a pair (left and right).

ArtNo. Description Price

1100SGFKLR GRP Mirror Covers € 45,90
1100SCLR Carbon Fiber Mirror € 54,90

Petrol Cap Pad, 3D Carbon Look

Our protection pad is made of high-quality 3M carbon fi-
ber foil which protects your petrol cap or hides scratches.
3 parts, for petrol caps with 6 screws!
BMW R1100S, R1100RS, R1150RS.

ArtNo. Description Price

80087 Petrol Cap Pad, 3D € 21,90
Carbon Look

You must send

your seat
to us!

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

194
 Wolo Very Loud Horn R1100S
This horn ensures with its 115 db that you get the ne-
cessary respect and that you will not be overlooked. The
horn is perfect for motorcycles, because it is small and
easy to install. Because of its E-approval mark it is street
legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm;
diameter 8,5cm.

ArtNo. Description Price

TM80BMW Wolo Very Loud horn and € 69,90
wiring

Dash pad R1100S

Dash pad in carbon fibre look. Protects this very visible
part of your bike from your key scratches.
Scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80081 Dash pad big € 14,90
80080 Dash pad small € 6,50

Spoiler screen R1100S

The spoiler screen is a flat, sport-styled windshield with a
deep recess in the centre and a small spoiler
in the centre.
Height: 330mm.
ArtNo. Description Price
S-r1100s-rg smoke grey € 84,90
S-r1100s-k clear € 84,90

Touring screen R1100S

Similar in shape compared to the original windscreen, the
Touring Screen includes a raised extension approximately
2-3 inches (5-7 cm) taller than the original windscreen.
Height: 390mm.

ArtNo. Description Price

T-r1100s-rg smoke grey € 84,90
T-r1100s-k clear € 84,90

www.mhornig.com 195
R 1100 S & R 1100 RS & R 1150 RS

Speedometer trim R1100RS & R1150RS

These rings for your speedometer and your rev counter are
an optical improvement for your GS, RT or RS. Just stick
on with glue or some silicone. May be removed without
residue. Consists of a set of both rings.

ArtNo. Description Price

0401 1 set anodized € 49,90
s2ml Silicone 2ml € 0,75

Sidestand foot enlargement R1100RS

Feel safer when parking your bike on dirt or asphalt with a
sidestand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.
Fits R1100RS.

ArtNo. Description Price

0709 Sidestand foot enlargement € 29,90

Brake pedal enlargement R1100RS

This brake pedal enlargement is nicely machined of
aluminium, knurled and anodized.
It is quite simple to install - just slip it on and lock in
place with a set-screw.

Fit for R1100RS.

ArtNo. Description Price

0100 Brake pedal enlargement € 28,90

Mirror Heightening R1100RS & R1150RS

Our mirror heightenings are the perfect solution if you
mainly see your shoulders in the rear mirrors. The mirrors
will be moved 2,5 centimeters higher (R1150RS) or 3
centimeters higher (R1100RS) which creates the neces-
sary space in order to improve the view to the back.

ArtNo. Description Price

BK 00 Mirror Heightening € 19,90
R1150RS
BK 00lr Mirror Heightening € 19,95
R1100RS

196
 LED Rear Light R1100RS & R1150RS
ArtNo. Description Price This LED rear light for BMW R1100RS and R1150RS is
available in clear and black. The rear light is E-homolo-
WLL-490-L LED Rear Light clear € 89,90
gated and road legal. A white license plate illumination is
WLL-490-L-S LED Rear Light black € 94,90 included. The original rear light will simply be exchanged.
The installation is easy and fast.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 197
R 1100 S & R 1100 RS & R 1150 RS

Clear indicator lenses rear

R1100RS & R1150RS
E-homologated! Sold in pairs, amber bulbs included!
Clear lenses fits BMW R1100RS and R1150RS rear.

ArtNo. Description Price

WLB-49 Set clear lenses € 29,90

Clear lenses front R1100RS & R1150RS

E-homologated! Sold in pairs, amber bulbs included!
Clear lenses fits BMW R1100RS, since 1992 and all
R1150RS.
Indicator bulb in orange or special coating. The special
coated one only lights orange when you use the indicator.
Single.
ArtNo. Description Price
WLB-8144003 1 set Clear lenses front € 27,80
BLWB
BLWB orange 12V/21W € 2,95
BLWBT
BLWBT special coated 12V/21W € 9,90

198
 Touring screen R1100RS
The Touring screen has the same shape as the original
one, but with an additional raised wind deflector about
5-7 cm high at the rear, across the entire width.
This deflects the wind over the rider and facilitates a
relaxed drive, particularly on longer trips.
Fits the R1100RS.
ArtNo. Description Price
T-r1100rs-rg smoke grey € 84,90
T-r1100rs-k clear € 84,90

Dash pad R1100RS & R1150RS

Dash pad in carbon fibre look. Protects this very visible
part of your bike from key scratches and enhances its
appearance. Scratch-resistant, self-adhesive pad.
Available in two versions:
- pad 1 for use with original centre cap
- pad 2 for use with our top yoke centre cap.

ArtNo. Description Price

80085 Dash pad 1 € 13,80
80086 Dash pad 2 € 12,90

www.mhornig.com 199
R 1200 GS, ADVENTURE & HP2

R1200GS
built 2004-2012

R1200GS Adventure HP2

built 2006-2013 built since 2005

200
 R1200GS Customisation
We introduce here our conversion of a BMW The second big topic for this R1200GS con-
R1200GS model year 2012 which is the last version was protection and security. Because
air cooled Boxer of the GS-Series made by of this we mounted fork and cardan crash
BMW Motorrad. The goal was to show what you protectors as well as the great looking ZTechnik
can do with a R1200GS with only street legal crash bar.
products of our current product range. The Nautilus horn ensures that you will not
be overlooked in dangerous situations, the oil
The first must have was a new ZTechnik winds- filler plug provides unauthorised access to the
hield with EG/ABE (European homologation) engine and the oil cooler screen makes the
with a height of 49cm and a width of 45cm to clean much easier.
improve the comfort and ergonomics of the
R1200GS. The handlebar was made higher and For the detailed individualisation we used
closer to the rider with our 20mm handlebar the material Carbon Fiber. The Carbon Fiber
risers and in order to improve the rear view a aerial conductor and the side fairings give this
mirror extension was also installed. R1200GS an unique look. Many little alumi-
We also used our brake- and shift lever enlar- nium milled, lathed and anodized products
gements to improve the brake- and shifting like Telelever end caps, Swingarm covers, rear
comfort, as well as a sidestand foot enlar- wheel center hub cover, frame cover and fork
gement to make sure that the R1200GS will end caps emphasise the whole design of the
stand where you want it to. motorcycle.
To protect the rider and pillion rider from dirt
and splash water we used the brand new PUIG The necessary sound and more powerful look
mud guard in combination with matt black side for our matt black GS are provided by the
panels. Sebring Phantom exhaust with a removable
Our comfort and ergonomics package was DB-Eater.
completed with a custom seat and a tail bag
with up to 16 litre volume.

www.mhornig.com 201
R 1200 GS, ADVENTURE & HP2

Rear wheel centre cover

Rear wheel centre lug cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - that does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

Handle Bar Risers 1200GS & Adv. 04-07

Handlebar adapter lifts 40 mm higher and 40 mm nearer,
or only 30 mm higher. A change of the brake hose is not
necessary with this modification. When using the original
BMW fog lamps, you also require our special screw set
(01-040-0272-0) for 040-0274 and 040-0274-1.
ArtNo. Description Price
K.LAR1200 40mm higher & 40mm € 119,90
closer
040-0274 30mm higher, black € 52,90
040-0274-1 30mm higher, silver € 52,90

Handle Bar Risers R1200GS & Adv. 08-12

There are 20mm and 40mm versions of this part, which
roughly equates to 3/4 inch and 1-1/2 inch respectively.
The 40mm set consists of double blocks and longer
bolts as can be seen in the image below. The shape and
finish of the risers complements the existing parts well.
The ability to turn the upper portions of the clamps by
180 degrees is retained. You need E10 and E12 for the
mounting.
ArtNo. Description Price
LAR12/08/20 Handle Bar Risers 20mm € 44,50
LAR12/08/40 Handle Bar Risers 40mm € 63,90

202
 GPS Mounting 1
Made of high-quality aluminium, CNC-machined. No
drilling necessary.
The windscreen can still be used in all positions.
For Garmin SPIII, SP26**, 2720, Zumo 550,
Zumo 660 and Nüvi.
SP26** & 2720 owners will need to purchase the
Garmin motorcycle mount, available from
Global Positioning Systems.
The „Zumo-Ad schraeg“ is an angular adapter for all
Garmin Navigators and can be used by riders who are
taller than 180cm to improve the view to the navigator.
Also suits Garmin Quest using
Garmin part 010-10610-00.
Colour: Anodized silver, weight: 260g.

Zumo-Ad tomt-Ad Ed 2

ArtNo. Description Price

44000 GPS Mounting for R1200GS (2004 - 2007) € 89,90
44010 GPS Mounting for R1200GS (2008 - 2012) € 89,90
Zumo-Ad This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo. With this adapter the € 11,60
GPS is 12mm closer to you and it can be moved 7,5mm or 15mm upwards or down-
wards. You need this option for the Zumo‘s bus bar.
Made of black Pom incl. all screws.
Zumo- Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
Ad340-350
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, € 15,90
420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the TomTom
holder.
ram-1zoll Adapter for 1“ RAM-ball € 34,90
Zumo-Ad Adapter angular for Garmin Zumo € 16,50
schraeg
tomt-Ad Ed 2 Adapter angular for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom € 17,90
schraeg 400, 410, 420, 450, 500 & 550

www.mhornig.com 203
R 1200 GS, ADVENTURE & HP2

GPS Mounting (TomTom/Zumo)

Made of high-quality aluminium, CNC-machined and
anodized. Easy and quick mounting.
No vibrations.
Always perfect view on the display. No drilling is necessa-
ry. The windscreen can still be used in all positions.

Because of its shape the mounting is perfect for TomTom

and ZUMO (don‘t forget to order the correct adapter).

ArtNo. Description Price

44008 GPS Mounting for R1200GS (2004 - 2007) € 79,90
44009 GPS Mounting for R1200GS (2008 - 2012) € 89,90
Zumo-Ad This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo. With this adapter the € 11,60
GPS is 12mm closer to you and it can be moved 7,5mm or 15mm upwards or down-
wards. You need this option for the Zumo‘s bus bar.
Made of black Pom incl. all screws.
Zumo- Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
Ad340-350
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, € 15,90
420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the TomTom
holder.
ram-1zoll Adapter for 1“ RAM-ball € 34,90
Zumo-Ad Adapter angular for Garmin Zumo € 16,50
schraeg
tomt-Ad Ed 2 Adapter angular for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom € 17,90
schraeg 400, 410, 420, 450, 500 & 550

GPS Mounting HP2 & HP2 Megamoto

Bolt + RAM-ball with M10 x 1,25 thread.
CNC-machined for TomTom and Garmin Zumo GPS
devices. You can mount all RAM-mounts on the RAM-ball.
Colour: Black
Can only be mounted with the mirror extensions BK 02R!

ArtNo. Description Price

NH 1/7 GPS Mounting black € 27,95
BK 02R Mirror extension € 49,95
1 set

204
 GPS Mounting Adventure
Easy and fast mounting is possible with our new GPS
mounting for BMW R1200GS Adventure 2005-2013.
The windscreen can still be used in all positions and you
always see your GPS without looking away from the street.
No vibrations!
For Garmin SPIII, SP26**, 2720, Zumo 550, Zumo 660,
Nüvi and all BMW Navigators. GPS SP26** & 2720
owners will need to purchase the Garmin motorcycle
mount (see pictures).
Colour: Anodized silver
In order to provide the necessary distance from the
screen you need the Zumo adapter (article no.: Zumo-Ad)
for all Garmin and BMW Navigators.

ArtNo. Description Price

44002 GPS Mounting for R1200GS Adventure 2005-2013 € 41,80
Zumo-Ad This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo. With this adapter the € 11,60
GPS is 12mm closer to you and it can be moved 7,5mm or 15mm upwards or down-
wards. You need this option for the Zumo‘s bus bar.
Made of black Pom incl. all screws.
Zumo- Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
Ad340-350
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, € 15,90
420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the TomTom
holder.
ram-1zoll Adapter for 1“ RAM-ball € 34,90

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear.

ArtNo. Description Price

BK 02 Mirror extensions (M10) € 49,95
R1200GS & Adv.

www.mhornig.com 205
R 1200 GS, ADVENTURE & HP2

Swing arm pivot cover

These covers are the perfect replacement for the original
plastic caps. Made of high-quality and very light alumini-
um in different versions and designs (A or B).

ArtNo. Description Price

Design A for R1200GS, Adv.
Design A 0-4-351 right anodized € 19,90
0-4-151 left anodized € 19,90
Design B for R1200GS, Adv.
0-4-35 right anodized € 19,40
0-4-36 right black anodized € 19,50
0-4-15 left anodized € 19,40
0-4-16 left black anodized € 19,70
Design B right or left for HP2
0-4-37 anodized € 19,90
0-4-38 black anodized € 19,80

Design B

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

206
 Brake pedal enlarger R1200GS
This special part is made of extremely handy aluminium
and enables safe braking. It gets mounted with two
screws, u-screws, nut and hulls which are all yet with the
enlargement.
You can download the installation instruction online!

ArtNo. Description Price

0140 Aluminium € 20,90
0140-1 anodized € 22,60

Telelever end caps R1200GS & Adv.

Aluminium cap, natural anodized.
We send the caps in a set (2 parts).

ArtNo. Description Price

0295 1 set silver anodized € 30,90
0296 1 set black anodized € 30,95

Cover
Covers for the fluid reservoirs.
You simply stick them onto the fluid reservoirs. Can be
removed without residue.
Made of high-quality aluminium.
They are sold in a set of two.

ArtNo. Description Price

0701 1 set anodized € 41,90
0702 1 set black anodized € 41,50
s2ml Silicone 2ml € 0,75

Foot brake fluid reservoir cover

Cover for the foot brake fluid reservoir, CNC-machined of
aluminium.
Image shows K1200R.
It is also visible on R1200GS.

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

www.mhornig.com 207
R 1200 GS, ADVENTURE & HP2
Rear seat caps R1200GS
You can use these two covers in order to fill the holes if
you have removed the rear seat and the grips. Available
in anodized. The front cover fits the rear seat lock exactly
and is very easy and fast to fit or remove.

ArtNo. Description Price

0511 Cover front anodized € 22,40
0514 Cover front black € 21,95
0513 Cover rear anodized € 8,00
0515 Cover rear black € 7,90

Centre cap top yoke

This part is an optical improvement for your top yoke as it
is made of robust aluminium with an emblem.
An integrated o-ring ensures a snug fit.

ArtNo. Description Price

0260 anodized € 25,90
0262 black anodized € 23,90
0265 anodized (without emblem) € 20,80

Crash bars R1200GS 2004-2009

These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!

ArtNo. Description Price

Z7101 Stainless Steel Crash bars € 329,90

208
 Engine cover
Made of 3mm aluminium with the latest laser-cutting and
bending technology. Available in 2 versions (with/without
grid) with 2 colours (natural/black anodized).
Easy and fast mounting to the original attachment points.
1 set (for left & right side) incl. fasteners and install
instructions.
Note: Not in combination with a crash bar.
Fits all R1200GS bikes from 2004-2009!

ArtNo. Description Price

0620 1 set anodized € 102,90
0621 1 set black anodized € 104,90
0622 1 set anodized with grid € 109,90
0623 1 set black anodized with grid € 114,90

Oil cooler
Perfect protection for your oil cooler which looks nice.
Made of high-quality aluminium.
The lattice is surrounded by a solid frame and keeps
insects or dirt away from the oil cooler.
Fitting instructions included.

ArtNo. Description Price

R1200GS & Adv. 04-07
kg-12gs anodized € 48,80
kg-12gs-s black anodized € 48,90
R1200GS & Adv. 08-09
kg-12gs08 anodized € 49,80
kg-12gs08-s black anodized € 49,90
R1200GS & Adv. 10-12
kg-12gs10 anodized € 49,80
kg-12gs10-s black anodized € 49,90

Stainless steel tank grille

Grille for the lateral openings on the left and on the right
tank sides. Made of high-quality aluminium. Mount with a
hot glue gun or silicone. Set consists of 2x the
emblem-part and 2x the other cover.

ArtNo. Description Price

0810 Tank lattice R1200GS MY 04-07 € 20,50
0811 Tank lattice R1200GS MY 08-12 € 20,50
s10ml Silicone 10ml € 0,95

www.mhornig.com 209
R 1200 GS, ADVENTURE & HP2

Number Plate Deflector

Made of 1mm high-quality stainless steel. This guard is
pre-drilled to be mounted behind the rear number plate.
It is very effective at keeping the luggage, pillion & rider
clean of mud and dirt.
Fits BMW R 1200 GS & Adv.,

ArtNo. Description Price

42001 Width 175mm € 27,90

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0245 anodized € 26,90
0246 black anodized € 26,95

Oil filler plug

Oil filler plug Torx, made of high-quality aluminium.
Use a Torx tool T45 from your BMW tools in order to fit
and remove the oil filler plug.
Choose between the anodized and the black anodized
version.

ArtNo. Description Price

0015 anodized € 23,90
0016 black anodized € 24,40

Fork tube cover

Nice looking cover for the fork tube which works as a
replacement for all plastic caps,
kept firmly in place by an o-ring.
In order to replace all plastic caps you get
2 covers in a set.

ArtNo. Description Price

0220 1 set anodized € 24,90
0221 1 set black anodized € 24,95

210
 Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your R 1200 GS models.
The crash bars are designed very robust and allow for an
equal distribution of the forces so that you and your bike
are protected in the best possible way.
The crash bar can also be combined with our
fairing-crash bars and the auxiliary light kit.
Crash bars offer a very good protection,
but they can lower the bank.

ArtNo. Description Price

SBL.07.562.100 Crash bars silver € 219,95
(04-12)
SBL.07.562. Crash bars black € 199,95
10100/B (04-12)
SBL.07.552.100 Fairing-Crash Bars € 199,95
silver (04-07)
SBL.07.565.100 Fairing-Crash Bars € 199,95
silver (08-12)
SBL.07.565. Fairing-Crash Bars € 199,95
10100/B black (08-12)
NSW.00.490.10000 Auxiliary Light Kit € 364,95
(Fog Light)

You can also mount the auxiliary light kit with a

mounting kit (without crash bars) on your R1200GS
MY 2008-2012.
ArtNo. Description Price
NSW.07.563.100 Mounting Kit for € 44,95
Auxiliary Lights
(08-12)

www.mhornig.com 211
R 1200 GS, ADVENTURE & HP2
Sidestand foot enlargement
Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized. Easy to install.
The higher version (article no. 0715 combined with article
no. 0715-20) is about 20mm high (10mm can easily be
screwed on or off) and makes your bike standing
straighter. That means you need much less power in order
to make it ready for driving, especially when riding with
luggage.
Art.no. 0713
There is a video for this product online: www.mhornig.com

ArtNo. Description Price

0713 normal version € 32,90
R1200GS *-05
0715 normal version € 32,90
R1200GS 06-12
(model 08-12 without lowering)
0715- Heightening € 11,90
20 R1200GS 06-12
(model 08-12 without lowering)
Art.no. 0715+0715-20

Side stand foot enlargement (lowered)

This side stand foot enlargement fits all R1200GS MY
2008-2012 which are lowered. More than 100% bigger
contact area. Article no. 0719 combined with Article no.
0719-20 is the higher version. This one is about 20mm
high (10mm can easily be screwed on or off) and makes
your bike standing straighter. That means you need much
less power in order to make it ready for driving, especially
when riding with luggage.

ArtNo. Description Price

0719 normal version € 31,90
R1200GS 08-12 lowered
0719-20 Heightening € 12,40
R1200GS 08-12 lowered

212
 Speedometer Cover
In order to customize your BMW R1200GS‘s or R1200GS
Adventure‘s speedo. Made of milled or laser-cut alumini-
um, anodized.
Very easy to mount with usual silicone. An install
instruction is included in the set for the speedo and the
revolution counter.

ArtNo. Description Price

0411-1 1 set anodized € 84,90
s10ml Silicone 10ml € 0,95

Axle pivot Cover

This cover for the axle pivot for all new R1200, K1200
and K1300 bikes gives a nice looking finish to the rear
end and gives your motorcycle a classy look.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

Twin Tone Horn

The Twin Tone Horn ensures with its 123,5 db that you get
the necessary respect and that you won‘t be overlooked.
The horn is perfect for motorcycles because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU. We offer also a mounting kit for the
Twin Tone Horn. This mounting kit consists of a stainless
steel mounting fitting for your BMW R1200GS and the
necessary ready-to-install wiring. If you have a bike with
ESA, the horn will only fit if the servomotor is mounted at
the side of the spring.
Horn: 12V 14A (non-stop operation),
Height 12cm; Width 13cm; Depth 8cm

Doesn’t fit for the lowered version of the R1200GS!

Doesn’t work for models with alarm system if the alarm
system uses the original horn!

ArtNo. Description Price

11690120 Twin Tone Horn € 44,80
11690120R12GSalt Mounting and wir- € 49,00
ing (without horn)
04-07
11690120R12GS Mounting and wiring € 54,00
(without horn) 08-*

www.mhornig.com 213
R 1200 GS, ADVENTURE & HP2
Fork Crash Protectors
These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.
ArtNo. Description Price
FP101 Fork Crash Protectors € 68,90

Loud horns, mountings and wiring are

online: www.mhornig.com

Stainless Steel Crash bars DOHC

These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!
BMW R1200GS 2010-2012.

ArtNo. Description Price

Z7102 Stainless Steel Crash bars € 335,00

214
 LED turning signals
Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a homo-
logation which makes it the first road legal LED for BMW
bikes! The LEDs flash yellow. Sold in pairs (for left and
right). Not compatible with BMW LED turning signals.

ArtNo. Description Price

01006 1 pair of LED turning € 84,95
signals with clear lenses
01006-g 1 pair of LED turning € 84,95
signals with grey lenses

Indicator lens
Indicator lenses. Sold in a set (2 pieces).
If you want, you can also order them as single items.
With E-mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.

ArtNo. Description Price

CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses).
Single.
BLWB-CBUS
ArtNo. Description Price
BLWB-CBUS orange 12V/10W € 2,80
BLWBT-CBUS special coated € 5,99
12V/10W BLWBT-CBUS

Clear taillight lens

White rear light with long-life LEDs. Super optics, quick
installation and with E-mark . The LED rear light gives your
motorcycle an entirely new appearance. You do not need
to worry anymore that the lamp in the rear light may be
broken, which would make you an accident risk.

ArtNo. Description Price

TT.044-0395 Clear taillight lens + LED € 69,95
0867 White taillight lens + LED € 59,90

www.mhornig.com 215
R 1200 GS, ADVENTURE & HP2
Clear lens + LED HP2
Far brighter than the standard set-up!
Fitted in seconds by anyone.
Features red high-intensity LEDs
Fits for HP2.

ArtNo. Description Price

40106-01 Without Integral ABS € 84,95

Adjustable Gear Lever

The adjustable gear lever for the BMW R1200GS and
R1200GS Adventure is made of high-quality materials
and convinces due to its trendy design. The lever consists
of two pieces and is made of CNC-milled aluminium
(scratch-resistant thanks to hardcoat finishing). It is infi-
nitely adjustable which considerably improves ergonomics
while driving. A spring lock ensures functionality, even
after a fall over. No street homologation necessary!
ArtNo. Description Price
FSC.07.352.10000 Adjustable € 129,95
Gear Lever

GS Sticker
These GS stickers fit perfectly into the GS stamping of
the R1200GS, but they can also be used on all GS bikes.
Available colours are red, black and silver. The silver GS
sticker fits perfectly to carbon fibre items.
One set of GS stickers includes two stickers, one for the
left and one for the right side.
ArtNo. Description Price
GS-red GS Sticker red € 10,30
GS-black GS Sticker black € 10,30
GS-silver GS Sticker silver € 10,30

216
 Stainless steel end weight
These end weights are made of stainless steel and create
a noble look for your bike. Included are two S/S-end
weights.
Stainless steel: 260 gram each.
R1200GS 2004-2012,
R1200GS Adventure 2005-2013.

ArtNo. Description Price

0452 Stainless steel end weights € 49,80

Dash pad
Carbon look. Protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80069 Dash pad € 7,40
R1200GS 04-07
80063 Dash pad € 8,70
R1200GS 08-12

Carbon Reservoir Cover Kit

Cover kit for reservoirs of brake and clutch fluid reservoirs
with carbon surface. The carbon fibre parts are precisely
shaped and are to be fitted by glue.

ArtNo. Description Price

400.10.40 1 set reservoir covers € 59,00
s2ml Silicone 2ml € 0,75

Carbon Aerial Conductor

Fits for R1200GS 08-12 & Adv. 08-13.
You can very easily enhance the original aerial
conductor with our carbon fibre aerial conductor and
improve the whole design of your bike. You just glue the
carbon aerial conductor onto the original plastic version.

ArtNo. Description Price

250.10.14 Aerial conductor € 59,00
s10ml Silicone 10ml € 0,95

www.mhornig.com 217
R 1200 GS, ADVENTURE & HP2
Carbon Rear Hugger
Provides ultimate protection for the rear shock absorber!
Spend less time for cleaning and more time for riding!
The best possible fit is provided by an stainless steel
fastener, with or without ESA.

If you ride your BMW R1200GS with side cases, you need
special clamps for the luggage rack (see product choice
below).

With EU-homologation.

ArtNo. Description Price

KHO.061.120GS.K Rear Hugger GSA € 269,90
and GS without ESA
KHO.063.120GS.K Rear Hugger for GSA € 279,90
and GS with ESA
SKO.062.120GS.A Set (2) clamps for € 44,90
Luggage rack GS
SKO.063.12GSA.A Set (2) Clamps € 43,90
for Caseholder GS
Adventure

Rear Hugger
Fits between the rear shock and wheel and extends
rearwards to finish near the end of the exhaust.
Designed specifically to keep road debris and water from
the backs of the rider‘s and/or the passenger‘s legs,
shock, gearbox, battery and centre stand. Developed
for the street, but also suitable for off-road to a limited
extent.

If you ride your BMW R1200GS with side cases, you need
special clamps for the luggage rack.
Fits R1200GS 04-12 and Adv. 05-13.

There is a video for this product online: www.mhornig.com

ArtNo. Description Price

40089 Rear hugger black € 203,90
primed
SKO.062.120GS.A Set (2) clamps for € 44,90
luggage rack GS
SKO.063.12GSA.A Set (2) clamps € 43,90
for caseholder GS
Adventure

218
 Frame cover
This cover for the open hole beyond the swing arm pivot is
made of aluminium and available in different versions.
It gets fixed on the right side.

ArtNo. Description Price

0440 anodized € 14,90
0441 black anodized € 14,90

Cylinder Protection
This cylinder protection protects your cylinders against
stone-chippings and damages due to downfalls. The
covers are especially adjusted to the shape of the valve
covers and have a deadening rubber inlay on their inner
side. The silver basic frame is made of lasered and brus-
hed alu while the black pad is made of CNC-milled alu.
R1200GS (10-12) & R1200GS Adv. (10-13).
ArtNo. Description Price
MSS.07.754.10000/S Cylinder € 179,95
protection

Handlebar Risers with Offset

Fits for R1200GS 08-12 & R1200GS Adventure 08-13.
Raising the handlebar by 20mm results in a more
upright, much more relaxed seating position. Moreover,
the handlebar is brought 30mm closer to the rider which
additionally improves driving comfort. No need for long
cables or brake cables! With EU street homologation!

ArtNo. Description Price

23569 Handlebar Risers 20/30mm € 82,50

ABS resin mud guard

This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider!
Everything you need to install it is included.
With ABE (European homologation).

ArtNo. Description Price

5055N ABS resin mud guard € 199,90

www.mhornig.com 219
R 1200 GS, ADVENTURE & HP2
Extra Lights
You can mount our extra lights, which are Hella fog lights,
with our side fairings made of glass fiber (white primed)
instead of the original metal side fairing on your BMW
R1200GS MY 2008-2012.
You will not only be more visible, but your bike will also
look much better!
Shipment:
1x Handlebar switch
2x Fog lights
2x Stainless steel mountings
1x Wire set
1x Mounting instruction with colour pictures
2x Side fairings in GRP

There is a video for this product online: www.mhornig.com

ArtNo. Description Price

69001 Extra Lights € 499,00
with GRP Fairing

220
 Beak enlargement
Give your GS a very sporty and distinctive look with this
beak enlargement.
It is very easy to install without any modifications.
ArtNo. Description Price
7694390 Beak enlargement € 56,90
for R1200GS 04-07
7705386 Beak enlargement € 63,90
for R1200GS 08-12

Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and off
the front of the engine. The fender extender solves this
problem effectively and elegantly. Made of tough ABS
plastic the extender attaches to the original fender with
expanding rivets which are of course included.

ArtNo. Description Price

054160 Extenda Fender € 29,95

Auxiliary bag below the luggage rack

There is quite a bit of space available below the large
luggage rack on the R1200GS. We have designed a
water-repellent and dirt-resistant bag to fit perfectly into
this space. There is space here for a spare pair of gloves
or some additional camping gear.
Dimensions (LxWxH): 18x25x9 cm
Volume: approx. 2 litres.

ArtNo. Description Price

0551226 Auxiliary bag € 51,90

Under Seat Bag Set R1200GS & Adv.

Our under seat bag set is completely manufactured from
waterproof material and a waterproof zipper. You mount
the bags with two high-quality Velcro straps and one
quick fastener on the backside of your frame. These bags
fit exactly to the R1200GS‘s frame under the rider seat.
The bags offer lots of space where you can store small
things, tools and much more. Sold as a pair (for left and
right).
ArtNo. Description Price
705052 Under Seat Bag Set € 93,50

www.mhornig.com 221
R 1200 GS, ADVENTURE & HP2

Side Cover
These covers replace the original aluminum covers of
the BMW R1200GS MY 2008-2012. They are made of
high-quality and extremely lightweight carbon fiber. The
material is also named CRP (carbon fiber reinforced
plastic). The detailed pictures in our online shop show you
the structure of the carbon fiber closer and you can see
that the writing R1200GS is of an impressive quality.

ArtNo. Description Price

40159l Left side cover € 149,90
40159r Right side cover € 149,90

You can find exhausts from Remus, Shark and Hurric and
suspensions front & rear for the R1200GS, Adv. and HP2
online: www.mhornig.com

Handlebar Risers with Offset

R1200GS (2004-2007) & R1200GS Adven-
ture (2005-2008)
Raising the handlebar by 30mm results in a more
upright, much more relaxed seating position. Moreover,
the handlebar is brought 15mm closer to the rider which
additionally improves driving comfort.
The handlebar riser also makes riding while standing less
tiring, which is of tremendous benefit to taller riders in
particular.
The overall result is a noticeable increase in stamina and
concentration. Long stretches on the motorway are less
nerve-racking, and even fast, difficult off-road sections
are easier to handle.
Easy to fit in minutes. No need for long cables or brake
cables! Fits on original handlebar.

ArtNo. Description Price

26877 30/15mm silver € 89,95
26877-S 30/15mm black € 89,95

222
 Frame cover Rallye
This cover for the open hole beyond the swingarm pivot is
made of aluminium and available in red painted.
It gets fixed on the right side.

ArtNo. Description Price

0418 Frame cover € 14,95

Swing arm pivot cover Rallye

These covers are the perfect replacement for the original
plastic caps. They are made of high-quality and very light
aluminium. For the BMW R1200GS Rallye we made a
special edition in red.
Shipment: a set for left and right side.

ArtNo. Description Price

0417 Swing arm pivot covers € 40,50

www.mhornig.com 223
R 1200 GS, ADVENTURE & HP2

Air Deflector
These air deflectors for the left and the right side help to
keep the wind off your arms and shoulders. Sold in a set
for the left and the right.
The holes for the screws do not exist in the original fairing
of the R1200GS, but are very easily drilled.

ArtNo. Description Price

399+400 Air deflector € 56,90
ha-windabw-r12gs Fastening for the € 6,80
air deflectors

Windscreen Adventure
This windscreen is not only wider in the lower part than
the original one, but also higher.
That means this windscreen provides perfect protection
for longer tours with a real off-road optic.
Dimensions: height 465mm; width top 385mm; width
middle 340mm; width „bottom“ 510mm.
The fastening for the R1200GS must be ordered separa-
tely (Art-no.: 699349).

ArtNo. Description Price

703196 Windscreen Adv. clear € 279,90
7708532 Windscreen Adv. smoke grey € 322,00
699349 Frame, truss and fastening € 232,90
set for R1200GS

Frame Infill Panels

Explore those wide open spaces on either side of the
R1200GS and then use the stylish frame infill panels to
cover them and enhance the look of your motorcycle.
Designed to be hooked behind the lower frame rail and
located under the edge of the seat at the top. No fixings
are necessary, but optional use clips are supplied for the
‘belt and braces’ customer.
Available in a silver or satin black finish.
DOES NOT FIT WITH THE BMW GENUINE LOW SEAT ADD-
ON ACCESSORY!

ArtNo. Description Price

240010B Pair of side covers black € 109,50
240010A Pair of side covers in silver € 109,50

224
 V-Stream Windshield
The „V-Stream“ windshield sets new standards for design,
technology and comfort.
Made of Quantum/Lexan Polycarbonate which is 10x
more scratch-resistant than usual acrylic.
Windshield V-Stream, clear, with homologation,
for R1200GS bikes 2004-2012.

ArtNo. Description Price

115108 Clear, Height 41cm, € 179,95
Width 41cm
Z2414 Clear, Height 49cm, € 229,95
Width 45cm

www.mhornig.com 225
R 1200 GS, ADVENTURE & HP2

Change front & rear seat

For all R1200GS & Adv. bikes
The driver‘s and pillion rider‘s seat are equipped with a fluting in order to release the tail bone. The seats were also
broadened for about 15mm. The padding consists of two layers, the upper one comfortably soft and the lower one avo-
ids denting. We especially took care of the pillion rider‘s comfort: Here, the seat is increased in the middle front part to
inhibit a cramped position. These alterations lead to a tangible comfortable riding - free from pain. Also the vexatious
sliding when the driver brakes has an end now. Available in three heights
(please note in the comment with the article number):
Your seat gets altered - you have to send it in! 1: like the original one
The change takes about 2 weeks. 2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)

You must send

ArtNo. Description Price
your seat sitzF Driver’s seat black € 199,00
to us! sitzS Pillion seat black € 194,00

Change one-piece seat

A distinct fluting (middle of the seat is deepened) releases the driver‘s tailbone and disperses the driver‘s weight all
over his bottom. Also, the seat gets broadened for about 15 mm.
The padding consists of two layers, the upper one comfortably soft and the lower one avoids denting.
Special contours for the pillion‘s seat avoid slipping when the driver has to brake.

Available in three heights

(please note in the comment with number):
1: like the original one
2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)

ArtNo. Description Price

sb Change one-piece € 299,00
seat black

226
 You need a tank bag, rear seat bag, duffel bag,
inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 227
R 1200 GS & ADV. LC & R 1250 GS & ADV

R1200GS & Adv LC

built 2013-2018
1170 ccm cylinder capacity
power: 125 PS.
max. torque 125 Nm at 6.500/min.

228
 R 1200 GS & ADV. LC & R 1250 GS & ADV

R1250GS & Adv

built since 2019
1254 ccm cylinder capacity
136 HP
max. torque143 Nm at 6.250/min.

www.mhornig.com 229
R 1200 GS & ADV. LC & R 1250 GS & ADV

GPS Mounting
Easy and fast mounting is possible with our new GPS mounting for BMW R1200GS LC, R1200GS Adv. LC, R1250GS.
The windscreen can still be used in all positions and you always see your GPS without having to look away from the
street. No vibrations!
For Garmin SPIII, SP26**, 2720, Zumo 550, Zumo 590, Zumo 595, Zumo 660, Nüvi and all BMW navigators.
GPS SP26** & 2720 owners will need to purchase the Garmin motorcycle mount (see pictures).
Colour: Anodized silver.
In order to provide the necessary distance from the screen, you need the Zumo adapter (article no.: Zumo-Ad) for all
Garmin and BMW navigators.

“Zumo-Ad“: This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo (not ZUMO 340, 345, 350, 390 and
395). With this adapter the GPS is 12mm closer to you and it can be moved 7,5mm or 15mm upwards and down-
wards. You need this option for the Zumo‘s bus bar. Made of black Pom incl. all screws.

“tomt-Ad Ed 2“: Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, 420, 450,
500 & 550, Incl. screws for mounting in the GPS mount and the TomTom holder.

Article “ZumoAd340-350“ is the adapter for Garmiin ZUMO 340, 345, 350, 390, 395 & 396.

ArtNo. Description Price

44014 GPS mounting € 86,50
Zumo-Ad Zumo adapter € 11,60
tomt-Ad Ed 2 TomTom 2 adapter € 15,90
ram-1zoll RAM 1 Inch adapter € 34,90
ZumoAd340-350 Adapter ZUMO 340, 345, 350, 390, 395 & 396 € 18,90

230
Twin Tone Horn
This horn ensures with its 123,5 db that you get the necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small and easy to install. Because of its E-approval mark it is street
legal in the EU. Does not fit for the lowered version of R1200GS LC, R1200GS Adv. LC, R1250GS! Doesn‘t work for
models with alarm system if the alarm system uses the original horn! We offer also a mounting kit for the horn. This
mounting kit consists of a stainless steel mounting fitting for your BMW R1200GS LC, R1200GS Adv. LC, R1250GS and
the necessary ready-to-install wiring. Horn: 12V 14A (non-stop operation), height 12cm; width 13cm; depth 8cm.

ArtNo. Description Price

11690120 Twin Tone Horn € 44,80
11690120R12GSLC Mounting and wiring (without horn) € 49,90

Rear wheel centre cover

Rear wheel centre lug cover with emblem.
The holes in the covers serve for cooling!
The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

R1200GS LC, R1200GS Adv. LC, R1250GS

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

www.mhornig.com 231
R 1200 GS & ADV. LC & R 1250 GS & ADV
Air Intake Grid
These anodized expanded metal grids are exactly cut for
the air intakes of your BMW. These grids prevent your air
filter from bigger dirt or animals without taking away the
engine‘s necessary air to breath. Shipping contains 2
pieces (left and right).

ArtNo. Description Price

R12LC-G-L R1200GS LC 2013-2016 € 12,90
R1250-G-L R1200GS LC 2017-2018 & € 13,80
R1250GS

Cooler protection
Perfect protection for your cooler which looks nice, made
of high-quality aluminum.

ArtNo. Description Price

Kg-12gs-LC R1200GS & Adv 13 & 17- € 83,00
18, R1250GS & Adv silver
Kg-12gs- R1200GS & Adv 13 & 17- € 103,90
LC-s 18, R1250GS & Adv black
Kg-12gs- R1200GS & Adv € 83,00
LC14 14-16 silver
Kg-12gs- R1200GS & Adv € 103,90
LC14-s 14-16 black

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found
in your BMW toolkit) in order to fit and remove it. BMW
R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.

ArtNo. Description Price

0245 anodized € 26,90
0246 black anodized € 26,95

Oil filler plug

Oil filler plug Torx, made of high-quality aluminium.
Use a Torx tool T45 from your BMW tools in order to
fit and remove the oil filler plug. Choose between the
anodized and the black anodized version. BMW R1200GS
LC, R1200GS Adv. LC, R1250GS & Adv.

ArtNo. Description Price

0015 anodized € 23,90
0016 black anodized € 24,40

232
 Cardan Crash Protector
This crash protector for the cardan is made of CNC-lathed
plastic. This crash protector provides additional protection
for your motorcycle. You install the crash protector or
pad on your cardan with a stainless steel screw and an
expansion holder.
BMW R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
059-27 Cardan crash protector € 39,90

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with
a sidestand foot enlargement. More than 100% bigger
contact area. Made of high-quality aluminium. Black ano-
dized. Easy to install. Does not fit for the lowered version
of the R1200GS/Adv LC, R1250GS & Adv!
ArtNo. Description Price
0725 Enlargement R1200/1250GS € 33,90
0725-20 Heightening R1200/1250GS € 10,90
0728 Enlargement R1200/1250GS € 34,90
Adv.

Side stand foot enlargement (lowered)

Feel safer when parking your bike on dirt or asphalt with
a sidestand foot enlargement. More than 100% bigger
contact area. Made of high-quality aluminium. Black
anodized. Easy to install.
R1200GS LC (2013-07/2015) lowered
R1200GS Adventure LC (2014-07/2015) lowered

ArtNo. Description Price

0726 Side stand foot enlargement € 32,60
0726-20 Heightening € 10,40

Side stand foot enlargement (lowered)

More than 100% bigger contact area. Made of high quali-
ty aluminium. Black anodized. Easy to install.
BMW R1200GS LC (08/2015- ) & R1250GS lowered
BMW R1200GS Adv LC (08/2015- ) & R1250GS Adv
lowered

ArtNo. Description Price

0724 Side stand foot enlargement € 33,90

www.mhornig.com 233
R 1200 GS & ADV. LC & R 1250 GS & ADV
Covers Suspension Mounting
These covers for the open holes of the suspension moun-
ting are made of aluminium. An expansion fastener will
hold them perfectly in place. Shipping contains a set (2
pieces). BMW R1200GS LC, R1200GS Adv. LC, R1250GS
& Adv.
ArtNo. Description Price
0533 silver anodized € 41,60
0534 black anodized € 41,90
R-0533 red € 45,90
B-0533 blue € 46,80

Frame Covers-Engine Mounting

These covers for the open holes of the engine mounting
are made of aluminium. The 4 covers will be installed in
front of and behind the cylinder on the left and right side.
Shipping contains a set (4 pieces). BMW R1200GS LC,
R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
0531 silver anodized € 52,90
0532 black anodized € 52,90
R-0531 red € 65,90
B-0531 blue € 66,90

Swing arm pivot covers

The covers will be installed with an expansion holder. You
use an Allen wrench to fasten the screw which expands
an o-ring which will keep the covers perfectly in place.
Shipment contains a set (2 pieces for left and right side).
BMW R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.

ArtNo. Description Price

0525 silver anodized € 32,90
0526 black anodized € 31,90

Rear Frame covers

These covers for the open holes beyond the seat are
made of aluminium. They will be installed under the
rider‘s seat on the left and right side. Shipping contains a
set (2 pieces, for left and right side). BMW R1200GS LC,
R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
0529 silver anodized € 25,60
0530 black anodized € 25,50
R-0529 red € 34,90
B-0529 blue € 34,90

234
 Frame cover left
This cover for the open hole beyond the swing-arm pivot
is made of aluminium and available in silver anodized,
black anodized and red. It gets fixed on the left side.
BMW R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
0527 silver anodized € 15,40
0528 black anodized € 15,60
R-0527 red € 18,90
B-0527 blue € 19,50

Fork tube cover

Nice looking cover for the fork tube which works as a
replacement for all plastic caps,
kept firmly in place by an o-ring. In order to replace all
plastic caps you get 2 covers in a set. BMW R1200GS
LC, R1200GS Adv. LC, R1250GS & Adv.

ArtNo. Description Price

0220 1 Set anodized € 24,90
0221 1 Set black anodized € 24,95

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear. BMW R1200GS LC,
R1200GS Adv. LC, R1250GS & Adv.

ArtNo. Description Price

BK02LC 1 set mirror extensions € 49,95

www.mhornig.com 235
R 1200 GS & ADV. LC & R 1250 GS & ADV
Vario Case Bags
These bags help you to load and unloaded your motor-
cycle cases. The bags are made for the Vario Cases and
their size can be changed like a tank bag. Waterproof
material. The left bag can also be used as a topcase bag
for the BMW Vario topcase. BMW R1200GS LC, R1200GS
Adv. LC, R1250GS & Adv.

ArtNo. Description Price

7687610 Right Vario Case bag € 51,90
7687611 Left Vario Case bag € 51,90
or Topcase bag
Tail-, Rear Seat Bag
Designed to fit perfectly on the rack or rear seat and with
the feature of expansion to allow even more capacity!
There is space for more than just the rain gear here -
expands from 8 litres up to 16 litres. Waterproof material,
reflective strips, attractive grey and black colour scheme
and the chord helps you to sustain the bag.
Dimensions: approx. 29 x 25 x 10/21 cm. BMW
R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
HSTBMW8/16 Bag 8/16 litres € 72,90
HSTBMW8 Bag only 8 litres € 51,90

Tank Bag 23L

With 16 - 23 litres of volume and with a big map pouch.
You can enlarge the tank bag from 23 cm to 33 cm
height. Size (L x W x H): ca. 30 x 24 x 23 cm.
A map pouch A4 (KTA4) can easy be mounted
onto the tank bag. Size 26 x 30 cm, Velcro fastener. BMW
R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
TM-EN.M16-23S Tank bag with suckers € 119,90
KTA4 Map pouch A4 € 20,90
regenhaube Rain protection cover € 9,90

Tankbag UT810 with lock

TanklockED extendable tank bag for Enduro motorcycles,
capacity 25 ltr. Tankbag Mounting BF11/BF17 only fits
for fuel filler caps with 6 screws on the outside! BMW
R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.

ArtNo. Description Price

UT810 Tankbag UT810 € 209,00
BF11 Mounting for R1200/1250GS € 14,90
BF17 Mounting for R1200GS Adv. € 15,00

236
 Alteration of your front & rear seat
The driver‘s and pillion rider‘s seat are equipped with a fluting in order to release the tail bone. The seats were also
broadened for about 15mm.
The padding consists of two layers, the upper one comfortably soft and the lower one avoids denting. We especially
took care of the pilion rider‘s comfort:
Here, the seat is increased in the middle front part to inhibit a cramped position.
These alterations lead to a tangible comfortable riding - free from pain. Also the vexatious sliding when the driver
brakes has an end now.
Available in three heights (please fill out your spec sheet):
1: like the original one
2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)
Your seat gets altered - you have to send it in!
The change takes about 2 weeks.

ArtNo. Description Price

sitzF Driver’s seat black € 199,00
sitzS Pillion’s seat black € 194,00
sitz.name Your name instead of Hornig € 100,00

Under Seat Bag Set

Our under seat bag set is completely manufactured from
waterproof material and a waterproof zipper. You mount
the bags with two high-quality Velcro straps and one
quick fastener on the backside of your frame. These bags
fit exactly to the R1200GS‘s frame under the rider seat.
The bags offer lots of space where you can store small
things, tools and much more.
Sold as a pair (for left and right). BMW R1200GS LC,
R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
705053 Under Seat Bag Set € 89,95

www.mhornig.com 237
R 1200 GS & ADV. LC & R 1250 GS & ADV

TRK33N

TRK52N

TRK46N
GIVI Trekker Topcase
Available in three versions, with capacities of 52 litres (TRK52N), 46 litres (TRK46N) and 33 litres (TRK33N). Thanks to
special selectors placed inside the bags (46 and 33 LT), you can convert each version either to fully open the entire lid
or only the uppermost smaller opening (very practical for quickly accessing items from the bag). Elaborately trimmed
in steel foil, these bags are not necessarily specific to just enduro bikes, they can also be a luxurious accessory on
the elegant motorcycles. This peculiar diversity sold in a single unique package gives the customer the opportunity to
choose the best combination to mount on the bike in order to suit his/her space needs.
BMW R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
Does not fit on the original BMW topcase mounting. You also need the GIVI topcase mounting.
See our article „Top case mounting“!

ArtNo. Description Price

TRK33N Trekker 33 - Monokey Case 33 lt. Volume, HxWxL 411x526x230mm € 298,00
TRK46N Trekker 46 - Monokey Case 46 lt. Volume, HxWxL 411x526x310mm € 309,50
TRK52N Trekker 52 - Monokey Case 52 lt. Volume, HxWxL 460x600x315mm € 314,00
E118 Backrest Pillion Rider € 39,00
E120 Topcase metal rack € 65,50

Top case mounting Aluminium

You mount it onto the original BMW topcase holder.
Not possible in combination with Brake light kit and/or
remote control. Can be mounted with original BMW side
case mounting! BMW R1200GS LC, R1200GS Adv. LC,
R1250GS & Adv.

ArtNo. Description Price

SRA5108 R1200GS LC & R1250GS € 164,00
SRA5112 R1200GS Adv. LC & € 181,00
R1250GS Adv

238
GIVI Trekker Outback Cases
These are the GIVI Trekker Outback side-cases, with aluminum structure and profiles. Available in two different sizes:
37 litres and 48 litres. Equipped with the new Monokey cam-side fitting system in die-cast aluminum and inserts in
reinforced technopolymer. BMW R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
Does not fit on the original BMW mounting. You also need the GIVI mounting!

ArtNo. Description Price

OBK37AL Trekker Outback 37L left, HxWxL 387x246x495mm € 373,00
OBK37AR Trekker Outback 37L right, HxWxL 387x246x495mm € 373,00
OBK48AL Trekker Outback 48L left, HxWxL 387x306x495mm € 398,00
OBK48AR Trekker Outback 48L right, HxWxL 387x306x495mm € 398,00

Side case mounting for

Trekker Outback
You will need the black steel
mounting system in order to
mount the Givi Trekker Out-
back side bags on your BMW
R1200GS LC, R1200GS Adv.
LC, R1250GS & Adv.
Only fits for GIVI Trekker
Outback side cases.

ArtNo. Description Price

PL5108CAM Side case mounting € 239,00

www.mhornig.com 239
R 1200 GS & ADV. LC & R 1250 GS & ADV

Remus HexaCone
More than 2kg lighter compared to the original
exhaust. Not only nice for the eyes, but also a
powerful sound - the HexaCone.
Available in stainless steel, carbon fibre,
titanium or stainless steel black (Black Hawk).
For Euro 4!
For R1200GS LC & R1200GS Adv. LC since
09/2016. Not for R1250GS & Adv!

ArtNo. Description Price ArtNo. Description Price

094682 Remus HexaCone € 758,00 094882 Remus HexaCone € 837,00
088016 Stainless Steel 088016 Titanium
0964782 Remus Black Hawk € 705,00
088016 (Stainless Steel Black)

Brake pedal enlargement

R1200GS & R1250GS
This special part is made of extremely handy aluminium
and enables safe braking. It gets mounted with two
screws, u-screws, nut and hulls which are all included.
Width 75mm.

ArtNo. Description Price

0142 Brake pedal enlargement € 20,90

Covers Fairing Crash bars R1200GS ADV.

These covers for the open holes of the fairing crash bars
of BMW R1200GS Advenutre (2014-) are made of alumi-
nium and are available in silver or black anodized. Those
2 covers will be installed on the left and right side.
Shipping contains a set (2 pieces).

ArtNo. Description Price

0442 silver anodized € 25,90
0443 black anodized € 25,90

240
 PUIG Touring windshield
For long distance rides PUIG introduces the Touring series
to minimize the windblast against the rider. These screens
raise the windblast for several centimeters allowing the
rider to keep a more comfortable position riding the
motorcycle. 130mm higher than the original screen
(original 380mm), with homologation. BMW R1200GS LC,
R1200GS Adv. LC, R1250GS. & Adv

ArtNo. Description Price

6486W Clear € 109,50
6486H Smoke grey € 109,50

Vario touring screen R1200GS & Adv LC

This type of touring screen has a small spoiler at the top
of the wind deflector. Can be manually set to seven posi-
tions in terms of angle and height. Tiresome turbulence is
also reduced by the air flow at the rear of the spoiler.
Length: 450mm. BMW R1200GS LC, R1200GS Adv. LC.

ArtNo. Description Price

4025066139569 Smoke grey € 127,90
4025066139552 Clear € 127,90

Touring screen R1200GS & Adv LC

The touring shield has the same shape as the original,
but with an additional raised wind deflector about 5-7 cm
high at the top, covering the entire width. This deflects the
wind over the rider and allows a relaxed ride, particularly
on longer trips. Length: 430mm. BMW R1200GS LC,
R1200GS Adv. LC

ArtNo. Description Price

4025066139538 Smoke grey € 84,90
4025066139521 Clear € 84,90
4025066139545 Black € 84,90

www.mhornig.com 241
R 1200 GS & ADV. LC & R 1250 GS & ADV
ZTechnik Windscreen
VStream windshields are made of tough FMR hardcoated
polycarbonate. This high-quality material, along with
state-of-the-art manufacturing techniques, provides
these windscreens with outstanding clarity and strength
characteristics unmatched by any windscreen maker
worldwide. BMW R1200GS LC, R1200GS Adv. LC,
R1250GS & Adv.
VStream windscreens are 30x more scratch-resistant
and have 20x greater crack and impact resistance than
other aftermarket windscreens on the market made from
commonly used acrylic or „aircraft plastic“. 4.5mm FMR
hardcoated polycarbonate.
ArtNo. Description Price
Z2485 dark tinted, Height 39,3 cm, € 159,00
Width 32,2 cm

ZTechnik Windscreen
VStream windshields are made from tough FMR
hardcoated polycarbonate. This high-quality material,
along with state-of-the-art manufacturing techniques,
provides these windscreens with outstanding clarity and
strength characteristics unmatched by any windscreen
maker worldwide. BMW R1200GS LC, R1200GS Adv. LC,
R1250GS & Adv.
VStream Windscreens are 30x more scratch-resistant
and have 20x greater crack and impact resistance than
other aftermarket windscreens on the market made from
commonly used acrylic or „aircraft plastic“.
4.5mm FMR hardcoated polycarbonate.
ArtNo. Description Price
Z2486 Clear, Height 39,3 cm, € 144,90
Width 32,2 cm

ZTechnik Windscreen
VStream windshields are made from tough FMR
hardcoated polycarbonate. This high-quality material,
along with state-of-the-art manufacturing techniques,
provides these windscreens with outstanding clarity and
strength characteristics unmatched by any windscreen
maker worldwide. BMW R1200GS LC, R1200GS Adv. LC,
R1250GS & Adv.
VStream Windscreens are 30x more scratch-resistant
and have 20x greater crack and impact resistance than
other aftermarket windscreens on the market made from
commonly used acrylic or „aircraft plastic“.
4.5mm FMR hardcoated polycarbonate.
ArtNo. Description Price
Z2487 Clear, Height 49,5 cm, € 144,90
Width 38,7 cm

242
 Handlebar Risers with Offset
Raising the handlebar by 30mm results in a more
upright, much more relaxed seating position. Moreover,
the handlebar is brought 24mm closer to the rider which
additionally improves driving comfort. The handlebar riser
also makes riding while standing less tiring, which is of
tremendous benefit to taller riders in particular. No need
for long cables or brake cables! Fits on original 32mm
handlebar. With EU street homologation! BMW R1200GS
LC, R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
25320 Handlebar Risers 30/24mm € 89,90

Adjustable Gear Lever

The adjustable gear lever for the BMW R1200GS LC,
R1200GS Adv. LC, R1250GS & Adv is made of high-
quality materials and convinces due to its trendy design.
The lever consists of two pieces and is made of CNC-
milled aluminium (scratch-resistant thanks to hardcoat
finishing). It is infinitely adjustable which considerably
improves ergonomics while driving. A spring lock ensures
functionality, even after a fall over. No street homologati-
on necessary!
ArtNo. Description Price
FSC.07.781.10000 Adjustable € 129,95
Gear Lever

Small deflector
R1200GS 2013-2016 & R1200GS ADV.
Those small deflectors are available in smoked grey or
black. The original one is always clear. You can order tho-
se small deflectors in the matching colour to your smoked
grey or black windshield. A perfect little detail. It replaces
the original part. Does not fit for R1200GS LC Rallye!
ArtNo. Description Price
7550H Smoke grey € 26,90
7550F Black € 26,90

Windscreen Stabilizer Kit

The stabilizer kit securely supports even the tallest
ZTechnik touring size windscreen. It also works with all
OEM and aftermarket windscreens currently available. The
stabilizer bracket installs easily and is fully compatible
with the OEM windscreen height adjust hardware. Simply
loosen the two stabilizer knobs, adjust the windscreen like
you normally do, re-tighten the two knobs, and off you go.
BMW R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
ArtNo. Description Price
Z5220 Stabilizer Kit € 89,90

www.mhornig.com 243
R 1200 GS & ADV. LC & R 1250 GS & ADV

Frame Infill Panels

The frame infill panels are supplied as a set of three. One for the left hand side, two for the right hand side. They have
a satin-smooth surface finish. They have been specifically designed to reduce the spray that is thrown up by the back
wheel and onto a pillion passenger‘s legs or any installed pillion panniers. BMW R1200GS LC, R1200GS Adv. LC,
R1250GS & Adv.
ArtNo. Description Price
240015B Side covers (3 parts) black R1200GS LC & R1250GS € 189,90
7518J Side covers (2 parts) black R1200GS Adv LC & R1250GS Adv € 119,00

ABS resin mud guard

This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider! Everything you need
to install it is included. With ABE (European homologa-
tion).

ArtNo. Description Price

6352J R1200GS & Adv (-2017) € 199,90
1947J R1200GS & Adv (2018), € 199,90
R1250GS & Adv

Carbon Rear mudguard

Provides ultimate protection for the rear shock absorber,
for your legs and your pillion rider! Spend less time for
cleaning - more time for riding! The best possible fit is
provided by an stainless steel fastener.

ArtNo. Description Price

KHO.001.GS12L.K R1200GS & Adv € 329,90
LC ( -2017)
KHO.181.GS18L.K R1200GS & Adv € 329,90
LC 2018
KHO.030.GS19T.K R1250GS & Adv € 329,90

244
 Air deflector
These smoked acrylic extensions will be mounted behind
the original hand protectors. They provide perfect pro-
tection from wind and rain. They are compatible with the
original windshield. Shipment: 1 set (1x left and 1x right).
BMW R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.

ArtNo. Description Price

EH5108 Air deflector € 89,00

Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and off
the front of the engine. The fender extender solves this
problem effectively and elegantly. Made of tough ABS
plastic the extender attaches to the original fender with
expanding rivets which are of course included. BMW
R1200GS LC, R1200GS Adv. LC, R1250GS & Adv.
Doesn‘t fit in combination with big engine protection of
the Adventure models.
ArtNo. Description Price
054235 Extenda Fender € 29,95

Carbon front mudguard

Our front fender is bigger at the rear end to reduce spread
water and dirt at the engine. You will find less dirt on the
front of the engine with this bigger front fender. Weight:
only ca. 260 gram! The front fender in carbon fiber is a
direct replacement for the original component.

ArtNo. Description Price

KVO.003.GS12L.K R1200GS & Adv LC € 299,90
KVO.009.GS19T.K R1250GS & Adv € 299,90

Carbon exhaust heat shield rear

The rear exhaust heat shield not only fulfills its purpose,
it also imparts a thoroughbred appearance to your BMW
R1200GS LC, R1200GS Adv. LC, R1250GS & Adv. It
is made of light carbon. As opposed to the OEM heat
shield, it combines top-quality materials and a functional
look with a reduction in weight. Simple, uncomplicated
exchange for the original shield. Uses the original screws.
ArtNo. Description Price
AHS.041.GS12L.K R1200GS & Adv. LC € 199,90
AHS.016.GS19T.K R1250GS & Adv. € 199,90

www.mhornig.com 245
R 1200 GS & ADV. LC & R 1250 GS & ADV
Carbon Wind Protector
The wind protector next to the instruments made of
carbon fiber is a direct replacement for the original
component. Its weight is only ca. 50 gram!
ArtNo. Description Price
WAL.028.GS12L.K left R1200GS 13-16 & € 149,90
R1200GS Adv LC
WAR.027.GS12L.K right R1200GS 13-16 € 149,90
& R1200GS Adv LC
WAK.006.GS19T.K left and right R1250GS € 239,90
& Adv
Carbon Air Intake
This air intake (upper water cooler cover) is made of
carbon fiber and replaces the original plastic fairing.
Its weight is only ca. 175 gram! You remove the original
plastic fairing and replace it with this high-quality carbon
fiber product.
ArtNo. Description Price
WKL.026.GS12L.K R1200GS 13-16 left € 349,90
WKR.025.GS12L.K R1200GS 13-16 right € 349,90
WKL.010.GS17L.K R1200GS 17-18 left € 389,90
WKR.009.GS17L.K R1200GS 17-18 right € 389,90

Carbon exhaust heat shield low

The low exhaust heat shield not only fulfills its purpose,
it also imparts a thoroughbred appearance to your BMW.
It is made of light carbon. As opposed to the OEM heat
shield, it combines top-quality materials and a functional
look with a reduction in weight. Simple, uncomplicated
exchange for the original shield. Uses the original screws.

ArtNo. Description Price

AHS.040.GS12L.K R1200GS & Adv. LC € 199,90
AHS.017.GS19T.K R1250GS & Adv € 199,90

Carbon Rocker Cover R1200GS & ADV. LC

The carbon fiber rocker cover right (cylinder protection) is
screwed onto the original mounting points.
The rocker covers for the BMW R1200 models is an
addition to the original components on the motorcycle
and helps to protect the motorcycle.

ArtNo. Description Price

VAL.007.GS12L.K Rocker cover left € 199,90
VAR.006.GS12L.K Rocker cover right € 199,90

246
 Carbon Frame Trianglecover
R1200GS & ADV. LC
The frame triangle cover made of carbon fiber for the
is a direct replacement for the original component and
contributes mainly to weight saving on your motorcycle.
You will use the original mounting points.

ArtNo. Description Price

RDL.013.GS12L.K Trianglecover left € 199,90
RDR.012.GS12L.K Trianglecover right € 199,90

Carbon Hand Guard

Our hand protectors made of carbon fiber for BMW
R1200GS LC & R1200GS Adv. LC are designed to hold
coldness and rain better away from your hands and fin-
gers. They are a bit bigger than the original hand guards,
but the new design does not make them look bigger. The
hand protector in carbon is a direct replacement for the
original component.

ArtNo. Description Price

HPL.024.GS12L.K Hand guard left € 199,90
HPR.023.GS12L.K Hand guard right € 199,90

Carbon Lower Tank cover

R1200GS 2013-2016
The carbon fiber lower tank side panels / intake pipe
covers are larger than the original covers. They not only
provide more protection, but also limit visibility of fuel
lines and cables and make the motronics look cleaner.
This part is a direct replacement for the original part.

ArtNo. Description Price

TUL.011.GS12L.K Tankcover left € 229,90
TUR.010.GS12L.K Tankcover right € 229,90

Carbon Cardan Housing Protection

The bevel drive housing protector made of carbon fiber
not only looks smashing, but also protects the exposed
areas of the bevel drive housing against damage and
stone chips. This bevel drive housing cannot be mounted
together with the rear splash guard.

ArtNo. Description Price

KGA.008.GS12L.K R1200GS & Adv LC € 219,90
KGA.027.GS19T.K R1250GS & Adv € 219,90

www.mhornig.com 247
R 1200 R 2005 - 2014 & RnNINE T

R1200R
built 2005-2014
1170 ccm cylinder capacity
power: 109 HP
Max. torque 115 Nm at 6.000/min.

248
 RnineT
built 2014 -
1170 ccm cylinder capacity
110 HP
Max. torque 119 Nm at 6.000/min.

www.mhornig.com 249
R 1200 R 2005 - 2014 & RnNINE T

GPS Mounting
You screw the GPS ball into the upper triple clamp. Then you can mount many different GPS mounts to it, for example
RAM-mounts or the mounts we offer in the category „Navigation and Communication“.

ArtNo. Description Price

NH 1-10 GPS mounting R1200R 05-14, M8, 55/60/65mm € 24,95
NH1-7-S GPS mounting RnineT, RnineT Scrambler, Pure & Urban G/S, M10, 100mm € 29,70

GPS Mounting with Plate

You will tighten the basic screw (thread M8) to your handlebar mounting (R1200R 2005-2014: front screw, RnineT:
rear screw). Then you will screw the movable GPS mounting plate to it. Garmin and TomTom motorcycle GPS units can
be mounted without any problems. However, you can also adjust the plastic plate very easily for other devices.
R1200R 2005-2014, RnineT, RnineT Scrambler, Pure & Urban G/S! Not for RnineT Racer!
ArtNo. Description Price
NH 1-12 GPS mounting with plate € 79,95

250
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. R1200R
05-14, RnineT, RnineT Scrambler, Pure, Racer & Urban
G/S.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,80
19x3 O-ring (4 pieces) € 2,80

Rear wheel centre cover

Rear wheel centre lug cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

R1200R 05-14, RnineT, RnineT Scrambler, Pure, Racer &

Urban G/S.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

www.mhornig.com 251
R 1200 R 2005 - 2014 & RnNINE T

Number Plate Deflector

Made of 1mm high-quality stainless steel. This guard is
pre-drilled to be mounted behind the rear number plate.
It is very effective at keeping the luggage, pillion & rider
clean of mud and dirt. R1200R 05-14, RnineT, RnineT
Scrambler, Pure, Racer & Urban G/S.

ArtNo. Description Price

42001 Width 175mm € 27,90

Axle pivot Cover

This cover for the axle pivot gives a nice looking finish
to the rear end and gives your motorcycle a classy look.
R1200R 05-14, RnineT, RnineT Scrambler, Pure, Racer &
Urban G/S.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

Fork tube cover R1200R 05-14

Nice looking cover for the fork tube which works as a
replacement for all plastic caps,
kept firmly in place by an o-ring.
In order to replace all plastic caps you get
2 covers in a set.

ArtNo. Description Price

0220 1 set anodized € 24,90
0221 1 set black anodized € 24,95

Telelever end caps R1200R 05-14

Aluminium cap, natural or black anodized.
We send the caps in a set (2 parts).

ArtNo. Description Price

0295 1 set silver anodized € 30,90
0296 1 set black anodized € 30,95

252
 Cover R1200R 05-14
Covers for the fluid reservoirs.
You simply stick them onto the fluid reservoirs. Can be
removed without any residue.
Made of high-quality aluminium.
They are sold in a set of two.
ArtNo. Description Price
0701 1 set anodized € 41,90
0702 1 set black anodized € 41,50
s2ml Silicone 2ml € 0,75

Foot brake fluid reservoir cover

Cover for the foot brake fluid reservoir CNC-machined of
aluminium. R1200R 05-14, RnineT, RnineT Scrambler,
Pure, Racer, Urban G/S

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

Frame Cover
Cover for the hole above the swing arm journal.
Available in anodized
and black anodized version.
R1200R 05-14, RnineT, RnineT Scrambler, Pure, Racer &
Urban G/S.

ArtNo. Description Price

0453 anodized € 14,40
0454 black anodized € 14,90

Bar-end weights R1200R 05-14

These bar-end weights made of stainless steel or
aluminium show that BMW riders are aware of function
and form.
Stainless steel 220 gram each,
aluminium 84 gram each.
Shipment: 2 end weights, 2 screws.

ArtNo. Description Price

0805 1 set stainless steel € 38,90
0806 1 set aluminium anodized € 29,90

www.mhornig.com 253
R 1200 R 2005 - 2014 & RnNINE T

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it. R1200R,
RnineT, RnineT Scrambler, Pure, Racer & Urban G/S.

ArtNo. Description Price

0245 anodized € 26,90
0246 black anodized € 26,95

Oil filler plug

Oil filler plug Torx, made of high-quality aluminium.
Use a Torx tool T45 from your BMW tools in order to fit
and remove the oil filler plug. Choose between the ano-
dized and the black anodized version. R1200R, RnineT,
RnineT Scrambler, Pure, Racer &
Urban G/S.

ArtNo. Description Price

0015 anodized € 23,90
0016 black anodized € 24,40

Swing arm pivot cover left

This cover is the perfect replacement for the original
plastic cap. Made of aluminium. R1200R 05-14, RnineT,
RnineT Scrambler, Pure, Racer & Urban G/S.

ArtNo. Description Price

0-4-15 anodized € 19,40
0-4-16 black anodized € 19,70

Swing arm pivot cover right

This cover is the perfect replacement for the original
plastic cap.
Made of aluminium.

ArtNo. Description Price

0-4-37 R1200R, anodized € 19,90
0-4-38 R1200R, black anodized € 19,80
0412 RnineT *) , anodized € 17,50
0413 RnineT *) , black anodized € 17,50
*) RnineT, RnineT Scrambler, Pure, Racer & Urban G/S

254
 Engine cover R1200R 05-10
Made of 3mm aluminium with the latest laser-cutting and
bending technology. Available in 2 versions (with/without
grid) and in 2 colours (natural/black anodized).
Easy and fast mounting to the original attachment points.
1 set (for left & right side) incl. fasteners and install
instructions. Note: Not in combination with crash bars!

ArtNo. Description Price

0620 1 set anodized € 102,90
0621 1 set black anodized € 104,90
0622 1 set anodized with grid € 109,90
0623 1 set black anodized with grid € 114,90

Handlebar Risers with Offset

R1200R 05-10
Raising the handlebar by 30mm results in a more
upright, much more relaxed seating position. Moreover,
the handlebar is brought 21mm closer to the rider which
additionally improves driving comfort. Fits on original
22mm handlebar. A longer brake line is necessary (part
no. 01-610-5365-0; only fits for R1200R with ABS)! With
EU street homologation!
ArtNo. Description Price
24915 Handlebar Risers 30/21mm € 72,90
01-610- Steel braided brake line € 49,95
5365-0
Cylinder Protection
This cylinder protection protects your cylinders against
stone-chippings and against damages due to downfalls.
The covers are especially adjusted to the shape of the
valve covers and have a deadening rubber inlay on their
inner side. R1200R 11-14, RnineT, RnineT Scrambler,
Pure, Racer & Urban G/S.
ArtNo. Description Price
MSS.07.754.10000/S Cylinder € 179,95
protection

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with
a side stand foot enlargement. Made of high-quality
aluminium. Black anodized. Easy to install. Does not fit
for the lowered version of RnineT.
ArtNo. Description Price
0710 R1200R (05-14) & RnineT € 32,90
(13-16)
0733 RnineT (2017-), RnineT € 54,90
Scrambler, Pure, Racer &
Urban G/S

www.mhornig.com 255
R 1200 R 2005 - 2014 & RnNINE T

Wolo Very Loud Horn RnineT

The Wolo Very Loud Horn ensures with its 115 db that
you get the necessary respect and that you won‘t be
overlooked. The horn is perfect for motorcycles because
it is small and easy to install. Because of its E-approval
mark it is street legal in the EU.
Wolo Very Loud Horn: 12V 6A (non-stop operation)
Height 7,5cm; Diameter 8,5cm

ArtNo. Description Price

TM8RnineT Wolo Very Loud horn € 69,90
and wiring

Handlebar Risers with Offset

RnineT, RnineT Scrambler, Pure & Urban G/S
Raising the handlebar by 25mm results in a more
upright, much more relaxed seating position. Moreover,
the handlebar is brought 23mm closer to the rider which
additionally improves driving comfort. The length of the
brake line etc. must be checked individually. RnineT
Scrambler: clutch line adapter is necessary!

ArtNo. Description Price

27370 Handlebar Risers € 119,95
26872 Adapter for clutch cable € 39,95

256
 Mirror Extensions
Our mirror extensions are the perfect solutions if you
mainly see your shoulders in the mirrors. The mirrors will
be moved a few centimetres outwards in order to improve
the view to the rear.

ArtNo. Description Price

BK 02 R1200R 2005-2014 € 49,95
BK02LC RnineT, RnineT Scrambler, € 49,95
Pure & Urban G/S

Cooler screen
Perfect protection for your oil cooler which looks nice.

ArtNo. Description Price

kg-r12r R1200R 2005-2010 € 29,00
kg-r12r011 R1200R 2011-2014 € 29,90
s10ml Silicone 10ml (2x needed) € 0,95
kg-RnineT RnineT, RnineT Scrambler, € 89,00
Pure, Racer & Urban G/S

Brake pedal enlargement

Nicely machined aluminium, knurled
and natural anodized.
This enlargement simply slips on and is held in place
with a set-screw.
R1200R 2005-2014, RnineT, RnineT Racer & Pure.

ArtNo. Description Price

0180 anodized € 24,50

Centre cap top yoke

This part is an optical improvement for your top yoke as it
is made of robust aluminium with an emblem.

ArtNo. Description Price

0260 R1200R, anodized € 25,90
0262 R1200R, black anodized € 23,90
0265 R1200R, anodized (w/oemblem) € 20,80
0267 RnineT, RnineT Scrambler, Pure, € 23,80
Racer & Urban G/S, anodized

www.mhornig.com 257
R 1200 R 2005 - 2014 & RnNINE T
Handlebar Risers R1200R 05-10
Handlebars rise by 25 mm for R1200R.
- For an upright and relaxed riding position
- Less strain on shoulders and wrists
- For sport bikes: Better standing, less exhaustive riding
- EG/ABE street homologation
When using the original BMW fog lamps, you also need
our special screw-set (01-040-0272-0).
ArtNo. Description Price
040-0265 25mm black € 52,90
610-0010 Risers 25mm silver € 52,90
040-0272 Special screw-set € 20,80

Handlebar risers R1200R 11-14

You will notice a definite decrease in the stress on your
wrists and shoulders. Your trip will be safer; you will arrive
more relaxed.
The riser is installed between the handlebars and the
upper fork brace. The longer screws required are included
in the kit.
Included:
Handlebar riser, 20 mm high on the left and right, longer
mounting screws, installation instructions, technical
component report

ArtNo. Description Price

610-5255 Handlebar risers € 63,90
20mm
01-610-5365-0 Front steel braided € 49,95
brake line 3 cm longer
(only fits for R1200R
with ABS!)

Twin Tone Horn R1200R 05-14

The Nautilus horn ensures with its 123,5 db that you get
the necessary respect and that you will not be overloo-
ked. Because of its E-approval mark it is street legal in
the EU.
We offer also a mounting kit for the horn. This mounting
kit consists of a stainless steel mounting fitting for your
BMW R1200R and the necessary ready-to-install wiring.

ArtNo. Description Price

11690120 Twin tone horn € 44,80
11690120R12R Mounting and wiring € 49,00
(without horn)

258
 Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your R 1200 R 2005-2014. The
crash bars are designed to be very robust and provide
an equal distribution of the forces to ensure that you and
your bike are protected in the best possible way.
Crash bars offer a very good protection, but they can
reduce the lean angle.

ArtNo. Description Price

SBL.07.606.10000/B black € 189,95

Stainless Steel Crash bars DOHC

R1200R 11-14
These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount acces-
sory lights, video cameras, or whatever they can imagine!
BMW R1200R 2011-2014

ArtNo. Description Price

Z7102 Stainless Steel Crash bars € 335,00

Back lifter
Slide the rubber coated pipe of the back lifter into the
final drive of your BMW and lift it up. Easy to use by one
person and a very stable support for the bike.
Made of high-quality steel. Diameter 42mm, zinc-plated.
The diameter of the rubber is 52,5mm. R1200R 05-14,
RnineT, RnineT Scrambler, Pure, Racer & Urban G/S.

ArtNo. Description Price

BT.heck-lifter Back lifter € 89,00

www.mhornig.com 259
R 1200 R 2005 - 2014 & RnNINE T

Taillight R1200R 05-14

The taillight with LED is available in clear with E-mark. It
is very easy to install and fits perfectly.

ArtNo. Description Price

WLL-87-L Clear lens with LED € 89,95

LED turning signals R1200R 05-14

Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a homo-
logation which makes it the first road legal LED for BMW
bikes! The LEDs flash yellow. Not compatible with BMW
LED turning signals. Sold in pairs (for left and right).
ArtNo. Description Price
01006 1 pair of LED turning € 84,95
signals with clear lenses
01006-g 1 pair of LED turning € 84,95
signals with grey lenses

Indicator lens R1200R 05-14

Clear indicator lenses. Sold in a set (2 pieces).
With E-Mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.
Screws that are too long will break the lense!

ArtNo. Description Price

CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator (usually
used with transparent lenses).
BLWB-CBUS Single.

ArtNo. Description Price

BLWB-CBUS orange 12V/10W € 2,80
BLWBT-CBUS special coated € 5,99
BLWBT-CBUS
12V/10W

260
 Rear Hugger
Fits between the rear shock and wheel and extends
rearwards to end near the end of the exhaust. Designed
specifically to keep road debris and water from the backs
of riders/passengers legs, shock, gearbox, battery and so
on. It can be painted in any colour you like
and fits 180 and 190 tyres. R1200R 05-14 & RnineT,
RnineT Scrambler, Pure, Racer.
ArtNo. Description Price
40095 Rear Hugger black primed € 204,90

Rear seat cover R1200R

Specifically designed cover for the pillion seat made of
high-quality glass fibre. Gives your BMW R1200R a very
sporty look. Note: article number 40211 only fits for
original seats up to year 2007, article number 40212 fits
original seats MY 2008-*.
Remove the seat, slide on the rear seat cover and mount
the seat again (not for comfort seats!).

ArtNo. Description Price

40211 Cover for pillion seat 05-07 € 159,00
40212 Cover for pillion seat 08-14 € 164,90

Engine Spoiler R1200R 05-14

Our engine spoiler is especially designed for your R1200R
and made of high-quality glass fibre reinforced synthetic
material and black primed. Because of our elaborate
mounting systems it is very easy to install.
Incl. all fasteners and install instructions.
Note: The angle freedom is somewhat restricted.

If you have no silicone you can also order our high-quality

silicone which is pre-filled in the volume you need and
easy to apply.

ArtNo. Description Price

40213 GRP engine spoiler € 399,00
40111 Grid for the waterworks € 19,90
s10ml Silicone 10ml € 0,95
(you need it 2x)

www.mhornig.com 261
R 1200 R 2005 - 2014 & RnNINE T
Fork Crash Protectors
These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium. These crash protectors provide
additional protection for your fork. Shipment includes the
crash protectors (left and right) and the mounting.

ArtNo. Description Price

FP101 R1200R & RnineT 14-16 € 68,90
FP102 RnineT 16-*, RnineT € 68,90
Scrambler, Pure, Racer &
Urban G/S

Cardan Crash Protector

This crash protector for the cardan is made of CNC-lathed
plastic. This crash protector provides additional protection
for your motorcycle. You install the crash protector or pad
on your cardan with a stainless steel screw and an expan-
sion holder. R1200R 05-14, RnineT, RnineT Scrambler,
Pure, Racer & Urban G/S.

ArtNo. Description Price

059-27 Cardan-Crash-Protector € 39,90

Carbon Rear Mudguard

Provides ultimate protection for the rear shock absorber!
Spend less time for cleaning - more time for riding!
The best possible fit is provided by a stainless steel
fastener. Fits 180 and 190 rear tyres.
ArtNo. Description Price
KHO.001.R120S.K R1200R 05-10 € 299,90
KHO.015.R120R.K R1200R without € 299,90
ESA 11-14
KHO.016.R120R.K R1200R with ESA € 299,90
11-14, RnineT,
RnineT Racer

Retro Infill Panels RnineT

These retro infill panels for your BMW RnineT, RnineT
Scrambler, Racer, Pure & Urban G/S are made of alumi-
nium and are a true highlight on your motorcycle. The side
covers combine functionality and a trendy retro design by
protecting the driver as well as the motorcycle against dirt
and splash water and giving a special classical look to
your BMW. Set for the left and the right side.

ArtNo. Description Price

9590P Retro Infill Panels € 133,90

262
 Dash pad R1200R
Carbon look. Protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80063 2005-2010 € 8,70
80073 2011-2014 € 8,20

Crash bars
Our crash bars are made of high-quality steel and are
especially designed for your BMW RnineT. The crash bars
are designed to be very robust and allow for an equal
distribution of forces in a crash. You and your bike are
protected in the best possible way. Crash bars offer a very
good protection, but they can reduce the cornering angle.
RnineT, RnineT Scrambler, Racer & Urban G/S

ArtNo. Description Price

7095N Crash bars black € 178,50

Suitcase Flat Lids R1200R 05-14

Sold as pair (for left and right side). These lids are
designed for urban mobility. No more trouble in the traffic.
We wished to reduce the original suitecase‘s thickness for
an easier driving between cars in urban area. Thickness:
original BMW lid 20cm vs. 5cm Suitcase Flat Lids
The total motorcycle width reduction is 30 cm
Material: GFK plastics.
Colour: glossy black (grounded, ready for painting)

ArtNo. Description Price

HRSSACO00122 Suitcase Flat Lids € 359,00

Carbon Reservoir-Cover Kit

Cover kit for reservoirs of brake and clutch fluid with car-
bon surface. The carbon fibre parts are precisely shaped
and are to be fitted by glue.

ArtNo. Description Price

400.10.40 1 set reservoir covers € 59,00
s2ml Silicone 2ml € 0,75

www.mhornig.com 263
R 1200 R 2005 - 2014 & RnNINE T
ABS resin mud guard R1200R
This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider!
Everything you need for installation is included.
With ABE (European homologation).

ArtNo. Description Price

5861N ABS resin mud guard € 199,90

Sport windshield RnineT & RnineT Pure ArtNo. Description Price

For sporty rides PUIG introduces the Sport series to have
regular and constant air flow around and towards the 7012W Clear € 112,00
helmet. This will reduce turbulences and give you a more 7012H Smoke grey € 112,00
sporty feeling.

V-Stream Windshield R1200R 2011-2014

The V-Stream windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonat which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it. Windshield V-Stream, with homolo-
gation and mounting.
ArtNo. Description Price
Z2444 Clear, Height 57,1cm, € 449,95
Width 46,3cm
Z2442 Light grey, Height 47,0cm, € 418,00
Width 45,7cm
Z2443 Dark grey, height 35,5cm, € 409,90
width 45,7cm

264
 High Windscreen R1200R
Transparent and aerodynamic wind protection incl.
mounting-kit and ABE.
Please order also the mounting kit.
Size (HxW): 49,5x46 cm.

ArtNo. Description Price

147A High windscreen € 106,00
A147A Mounting kit € 42,50
2005-2010
A5100A Mounting kit € 66,50
2011-2014

Retro fairing windscreen RnineT Scrambler

This retro fairing windscreen highlights the retro image of
the BMW RnineT Scrambler and gives your bike a unique
look. The windscreen is available in clear, light tinted,
dark tinted or black. The fairing part of the windscreen is
made of mat black plastic material regardless of which
windscreen colour you choose.

ArtNo. Description Price

9253W clear € 229,90
9253H light tinted € 229,90
9253F dark tinted € 229,90
9253N black € 229,90

V-Stream Windshield R1200R 2005-2010

The „V-Stream“ windshield sets new standards for design,
technology and comfort.
Made of Quantum/Lexan Polycarbonate which is 10x
more scratch-resistant than usual acrylic.
The windscreen will be shipped with everything you need
to mount it.
Windshield V-Stream, light grey, with homologation.

ArtNo. Description Price

115102 Height 48cm, Width 45cm € 339,95
Z2409 Height 55cm, Width 48cm € 349,00

www.mhornig.com 265
R 1200 R 2005 - 2014 & RnNINE T
AC-Schnitzer Exhaust RnineT
Conical design combined with retro-style gives the street
bike a Moto-GP look. Because of the usual AC-Schnitzer
power and the incomparable sound we are convinced by
this AC-Schnitzer Exhaust for BMW RnineT. Easy to install.
„Slip on“. Part no. AC-S-RnineT-EU4 is for Euro 4!
ArtNo. Description Price
AC-S-RnineT RnineT € 634,00
*-08/2016
AC-S-RnineT-EU4 RnineT 09/2016 € 636,00
- *, Pure, Racer
& Urban G/S
(Euro 4)

ABS resin mud guard RnineT

This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider! Everything you need
to install it is included. For RnineT with high exhaust you
should move the exhaust slightly outwards. You can also
adjust the position of the fender‘s splash guard or slightly
adjust the form of the splash guard. BMW RnineT, RnineT
Pure, Racer & Urban G/S

ArtNo. Description Price

7023J ABS resin mud guard € 205,90

Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and front
of the engine. The fender extender solves this problem
effectively and elegantly.
Made of tough ABS plastic the extender attaches to the
original fender with expanding rivets which are of course
included.
ArtNo. Description Price
054231 RnineT € 29,95
054243 RnineT Scrambler, € 29,95
Racer & Pure
054180 R1200R 06-10 € 30,90
054190 R1200R 11-14 € 29,95

266
 You must send
your seat
to us!

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 267
R 1200 R LC 2015, R 1250 R, R 1200 RS & R 1250 RS

R1200R LC & R1250R

built 2015 -
1170 ccm cylinder capacity
power: 125 PS
max. torque 125 Nm at 6.500rpm

268
 R1200RS LC & R1250RS
built 2015 -
1170 ccm cylinder capacity
power: 125 PS
max. torque 125 Nm at 6.500rpm

www.mhornig.com 269
R 1200 R LC 2015, R 1250 R, R 1200 RS & R 1250 RS

Rear wheel centre cover

Rear wheel centre lug cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

Cardan Crash Protector

This crash protector for the cardan is made of CNC-lathed
plastic. This crash protector provides additional protection
for your motorcycle. You install the crash protector or
pad on your cardan with a stainless steel screw and an
expansion holder.

ArtNo. Description Price

059-27 Cardan-Crash-Protector € 39,90

Crash bars R1200R & R1200RS

This stainless steel engine guards will, unlike powder-coa-
ted steel guards, never rust. They are carefully designed to
allow clearance for oil changes or valve cover access, so
they never need to be removed. Does not fit in combinati-
on with the original BMW spoiler!
ArtNo. Description Price
30601012 Crash bars € 229,90
30601012-R Crash bars red € 229,00
30601002 Crash bars black € 249,90
30601012-B Crash bars blue € 299,90

270
 Covers Suspension Mounting
These covers for the open holes of the suspension
mounting are made of aluminium. An expansion fastener
will hold them perfectly in place. Shipping contains a set
(2 pieces).
ArtNo. Description Price
0533 silver anodized € 41,60
0534 black anodized € 41,90
R-0533 red € 45,90
B-0533 blue € 46,80

Frame Covers-Engine Mounting

These covers for the open holes of the engine mounting
are made of aluminium. The 4 covers will be installed in
front of and behind the cylinder on the left and right side.
Shipping contains a set (4 pieces).
ArtNo. Description Price
0531 silver anodized € 52,90
0532 black anodized € 52,90
R-0531 red € 65,90
B-0531 blue € 66,90

Rear Frame covers

These covers for the open holes beyond the seat are
made of aluminium. They will be installed under the
rider‘s seat on the left and right side. Shipping contains a
set (2 pieces, for left and right side).
ArtNo. Description Price
0529 silver anodized € 25,60
0530 black anodized € 25,50
R-0529 red € 34,90
B-0529 blue € 34,90

Frame cover left

This cover for the open hole beyond the swingarm pivot is
made of aluminium. It gets fixed on the left side.

ArtNo. Description Price

0527 silver anodized € 15,40
0528 black anodized € 15,60
R-0527 red € 18,90
B-0527 blue € 19,50

www.mhornig.com 271
R 1200 R LC 2015, R 1250 R, R 1200 RS & R 1250 RS
Handlebar Risers with Offset
Raising the handlebar by 30mm results in a more upright,
much more relaxed seating position. Moreover, the
handlebar is brought 21mm closer to the rider which ad-
ditionally improves driving comfort. Fits on original 32mm
handlebar. When mounting the handlebar risers, you have
to reposition the clutch cable (see install instruction).

ArtNo. Description Price

26206 R1200R LC & R1250R € 101,90
26207 R1200RS & R1250RS € 104,90

GPS Mount R1200RS

Easy and fast mounting is possible with our new GPS
mounting for BMW R1200RS LC.
For Garmin SPIII, SP26**, 2720, Zumo 550, Zumo 590,
Zumo 595, Zumo 660, Nüvi and all BMW Navigators.
GPS SP26** & 2720 owners will need to purchase the
Garmin motorcycle mount (016799 or 016869).

ArtNo. Description Price

44015 GPS Mount € 92,90
tomt-Ad Ed 2 TomTom Adapter € 15,90

Swing arm pivot covers

These aluminium parts cover the big holes above the
footpegs of your BMW and make sure that no dirt or dust
can stay in it. However, water can still escape.
Shipment contains a set (2 pieces for left and right side).

ArtNo. Description Price

0535 silver anodized € 35,90
0536 black anodized € 35,90
R-0535 red € 45,90
B-0535 blue € 46,80

Cooler protection
Perfect protection for your cooler which looks nice, made
of high-quality aluminum.
The lattice is surrounded by a solid frame and keeps
insects or dirt away from the cooler.
Cooler protection and fitting instructions are included.

ArtNo. Description Price

Kg-12r-LC Cooler protection € 134,90

272
 Oil filler plug
Oil filler plug Torx, made of high-quality aluminium.
Use a Torx tool T45 from your BMW tools in order to fit
and remove the oil filler plug.
Choose between the polished, the anodized and the
black anodized version.

ArtNo. Description Price

0015 anodized € 23,90
0016 black anodized € 24,40

Brake Pedal Enlargement

It is nicely machined of aluminum and natural anodized.
The surface is slotted in order to avoide slipping. This
enlargement simply slips on and is held in place with two
set-screws. Length: circa 6,5 cm, Width: circa 2,9 cm.

ArtNo. Description Price

0103 Brake Pedal Enlargement € 34,90

GPS Mount R1250RS

In order to mount BMW Navigators, you need part number
44018. For Garmin Zumo 550, Zumo 590, Zumo 595,
Zumo 660 & Nüvi you also need part number 44004. For
TomTom GPS systems, please order our special adapter
(tomt-Ad Ed 2) in addition to part no. 44018 and 44004.
If handlebar risers are installed you need part no. 44004
and the Zumo adapter (Zumo-Ad) in addition to part no.
44018 in order to mount BMW Navigators and Garmin
devices.
ArtNo. Description Price
44018 GPS mount € 59,90

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

www.mhornig.com 273
R 1200 R LC 2015, R 1250 R, R 1200 RS & R 1250 RS

Handlebar risers
This handlebar riser for your BMW R1200R LC (2015-) & R1200RS lets you sit up straighter and be more comfortable
on longer rides. You will notice a definite decrease in the stress on your wrists and shoulders. Your trip will be safer, you
will arrive more relaxed. The riser is installed between the handlebar and the upper fork brace. The longer screws that
are required are included in the kit.
Materials: - Made of aluminium - Silver anodised - High-strength, stainless steel screws
What‘s included: - Handlebar riser, 25 mm high on the left and right - longer mounting screws - installation instruc-
tions - street homologation
You can order special screws (article no. 31002) for the BMW GPS mounting.
ArtNo. Description Price
31000 Handlebar risers 25mm € 82,30
31002 Special screw-set € 28,90

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.

ArtNo. Description Price

0729-2 Sidestand foot enlargement € 33,50

274
GPS Mounting
You screw the GPS-ball into the upper triple clamp. The screw is 60/70mm long with a M8 thread. Then you can
mount many different GPS mounts to it, for example RAM-mounts or the mounts we offer in the category „Navigation
and Communication“.
ArtNo. Description Price
NH 1-10 GPS Mounting € 24,95

ABS resin mud guard

This solid rear hugger is made of ABS resin plastics
and provides perfect protection for your suspension,
your exhaust, your header and for the whole rear part of
your bike. Not to forget your pillion rider! Everything you
need for installation is included. With ABE (European
homologation).

ArtNo. Description Price

7682J R1200R/RS (2015-2017) € 199,90
3503J R1200R/RS (2018) & € 202,90
R1250R/RS

Wolo Very Loud Horn

This horn ensures with its 115 db that you get the neces-
sary respect and that you will not be overlooked. The horn
is perfect for motorcycles, because it is small and easy to
install. Because of its E-approval mark it is street legal in
the EU. Horn: 12V 6A (non-stop operation),
height 7,5cm; diameter 8,5cm. Doesn‘t work for models
with alarm system if the alarm system uses the original
horn!
ArtNo. Description Price
WOLO-BMWLC Magnum Horn Wolo € 79,90

www.mhornig.com 275
R 1200 R LC 2015, R 1250 R, R 1200 RS & R 1250 RS
Touring screen R1200R LC
The touring shield has the same shape as the original,
but with an additional raised wind deflector about 5-7 cm
high at the top, covering the entire width. This deflects the
wind over the rider and allows a relaxed ride, particularly
on longer trips. Length: 370mm.
You need the original BMW windshield mounting
(46638555087) for the installation!
ArtNo. Description Price
T-r1200r-2015-rg Smoke grey € 84,90
T-r1200r-2015-k Clear € 84,90
T-r1200r-2015-s Black € 84,90

Touring screen R1200RS

The touring shield has the same shape as the original,
but with an additional raised wind deflector about 5-7 cm
high at the top, covering the entire width. This deflects the
wind over the rider and allows a relaxed ride, particularly
on longer trips.
Length: 440mm.
ArtNo. Description Price
4025066151653 Smoke grey € 84,90
4025066151646 Clear € 84,90
4025066151660 Black € 84,90

Touring windshield R1200RS & R1250RS

For long distance rides PUIG introduces the Touring series
to minimize the windblast against the rider. These screens
raise the windblast for several centimeters, allowing the
rider to keep a more comfortable position riding the
motorcycle.
9,5 cm higher than the original windscreen.
Height 55cm, width 42cm

ArtNo. Description Price

7617W clear € 116,50
7617H smoke grey € 116,50

Remus Black Hawk R1250R & R1250RS

Not only nice for the eyes, but also a powerful sound - the
Black Hawk exhaust.
Available in stainless steel black (Black Hawk).
With homologation.

ArtNo. Description Price

0564782088219 Remus Black Hawk € 753,00
(Stainless Steel
Black)

276
 You must send
your seat
to us!

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

Crash bars R1250R & R1250RS

Our crash bars are made of high-quality steel (black) or stainless steel (silver) and are especially designed for your
BMW R1250RS model. The crash bars are very robust and allow for an equal distribution of the forces. Thus, you and
your bike are protected in the best possible way. The fairing crash bars can only be mounted in combination with our
engine crash bars or the original BMW crash bars. Crash bars offer a very good protection, but they can lower the
bank. R1250RS: Does not fit in combination with the original BMW engine spoiler!

ArtNo. Description Price

SBL.07.904.10000/B Set crash bars black € 229,95
SBL.07.904.10101 Set crash bars stainless steel € 279,95

www.mhornig.com 277
R 1200 RT 2005-2013

R1200RT
built 2005-2013
1170 ccm cylinder capacity
power: 110 PS
max. torque 115 Nm

278
 GPS Mounting 2005-2009
Made of high-quality aluminium, CNC-machined.
The windscreen can still be used in all positions.
For Garmin SP26**, 2720, Zumo 550, Zumo 590, Zumo
595, Zumo 660, Nüvi & Garmin Quest GPS.
No drilling is required.

SP26** & 2720 owners will need to purchase the

Garmin motorcycle mount, available from Global
Positioning Systems.
Garmin Quest requires Garmin Part: 010-10610-00.

Allows full range of adjustment

of the BMW R1200RT screen.

Colour: Anodised matt black. Weight: 200g.

For R1200RT MY 2005 - 2009.

Zumo-Ad
tomt-Ad Ed 2

ArtNo. Description Price

44001 GPS Mounting 3 for the R1200RT (2005-2009) € 79,95
Zumo-Ad This adapter is made for all Garmin SPIII, SP26**, 2720 & Zumo. With this adapter the € 11,60
GPS is 12mm closer to you and it can be moved 7,5mm or 15mm upwards or down-
wards. You need this option for the Zumo‘s bus bar.
Made of black Pom incl. all screws.
Zumo- Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
Ad340-350
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, € 15,90
420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the TomTom
holder.
ram-1zoll Adapter for 1“ RAM-ball € 34,90

www.mhornig.com 279
R 1200 RT 2005-2013
GPS Mounting
You can mount your GPS fast and easily with our new
GPS mount for the BMW R1200RT from MY 2010-2013.
The windscreen can still be used in all positions and your
navigation system is always in the best possible field of
vision.
Our GPS mounts are very stable and do not allow
vibrations.
Fits for all BMW Navigation Systems, Garmin SPIII,
SP26**, 2720, Zumo 550, Zumo 590, Zumo 595, Zumo
660, Nüvi. and X-Navi. SP26** & 2720 owners need the
Garmin motorcycle mount (016799 or 016869).
There are six M4 threads, but only four are necessary to
hold any GPS firmly in place.

ArtNo. Description Price

44011 GPS Mounting for the R1200RT (2010-2013) € 76,90
Zumo- Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
Ad340-350
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, € 15,90
420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the TomTom
holder.
ram-1zoll Adapter for 1“ RAM-ball € 34,90

Bar risers
This part will raise your handlebars for 25mm, creating
a more comfortable riding position, while enhancing
the overall handling of your bike. Longer brake line not
needed when installing these bar risers.
Set consisting of the bar risers and fitting screws.
Does not fit for bikes with switches on the handle bar!

ArtNo. Description Price

0420 1 set anodized 05-09 € 92,90
0420-1 1 set anodized 10-13 € 88,90

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.

ArtNo. Description Price

0710 Sidestand foot enlargement € 32,90

280
 Brake pedal enlargement
This brake pedal enlargement is nicely machined of
aluminium, knurled and anodized.
It is quite simple to install - just slip it on and lock in
place with a set-screw.

ArtNo. Description Price

0100 Brake pedal enlargement € 28,90

Axle pivot Cover

This cover for the axle pivot for all new R1200, K1200
and K1300 bikes gives a nice looking finish to the rear
end and gives your motorcycle a classy look.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0245 anodized € 26,90
0246 black anodized € 26,95

Oil filler plug

Oil filler plug Torx, made of high-quality aluminium.
Use a Torx tool T45 from your BMW tools in order to fit
and remove the oil filler plug.
Choose between the polished, the anodized and the
black anodized version.

ArtNo. Description Price

0015 anodized € 23,90
0016 black anodized € 24,40

www.mhornig.com 281
R 1200 RT 2005-2013

Rear wheel centre cover

Rear wheel centre lug cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

282
 Air Deflector 2010-2013
They offer perfect protection against wind, weather, cold
and dirt. They are made of 6mm thick, scratch-resistant
and gasoline-resistant PMMA plastic.
Available in smoked grey or clear.
Complete set for the left and the right side.

ArtNo. Description Price

SP8403FC smoked grey € 123,90
SP8403T clear € 123,90

Air Deflector 2005-2009

They offer perfect protection against wind, weather, cold
and dirt. They are made of 6mm thick, scratch-resistant
and gasoline-resistant PMMA plastic.
Available in smoked grey or clear.
Complete set for the left and the right side.

ArtNo. Description Price

SP7802FC smoked grey € 123,90
SP7802T clear € 123,90

Chrome cap III

Fits for R1200RT 2005-2013.
The chrome cap III for the light adjustment will give your
BMW another additional highlight.
The installation is as easy as effective - just stick it on
with some glue like Uhu or silicone.

ArtNo. Description Price

0505 Chrome cap III € 4,90
s2ml Silicone 2ml € 0,75

www.mhornig.com 283
R 1200 RT 2005-2013

Centre cap top yoke

This part is an optical improvement for your top yoke as it
is made of robust aluminium with an emblem.
An integrated o-ring ensures a snug fit.

ArtNo. Description Price

0260 anodized € 25,90
0262 black anodized € 23,90
0265 anodized (without emblem) € 20,80

Synto brake- and clutch lever

Synto is the name of the 6x adjustable CNC high-precision
brake and clutch made of aluminium. Combines elegance
and functionality. Handling pure!

R1200RT 2005-2009:

ArtNo. Description Price

BKH3-KH35-15-11-K black-silver € 198,00
BKH3-KH35-17-15-K red-black € 198,00
BKH3-KH35-14-15-K blue-black € 198,00

R1200RT 2010-2013:

ArtNo. Description Price

BH27-BKH1-15-11-K black-silver € 198,00
BH27-BKH1-17-15-K red-black € 198,00
BH27-BKH1-14-15-K blue-black € 198,00

End weights
These end weights create a noble look for your bike.
Included are two end weights and two screws for fixing.
Stainless steel: 220g each, aluminium: 84g each

ArtNo. Description Price

0451 Stainless steel, 05-09 € 39,90
0805 Stainless steel, 10-13 € 38,90
0806 Aluminium anodized, 10-13 € 29,90

284
 Stainless Steel Crash bars DOHC
These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!

BMW R1200RT 2010-2013

ArtNo. Description Price

Z7102 Stainless Steel Crash bars € 335,00

Stainless Steel Crash bars

These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount accesso-
ry lights, video cameras, or whatever they can imagine!

BMW R1200RT 2005-2009

ArtNo. Description Price

Z7101 Stainless Steel Crash bars € 329,00

www.mhornig.com 285
R 1200 RT 2005-2013
Engine cover
Made of 3mm aluminium with the latest laser-cutting and
bending technology. Available in 2 versions (with/without
grid) and in 2 colours (natural/black anodized).
Easy and fast mounting to the original attachment points.
1 set (for left & right side) incl. fasteners and install
instructions.
Note: Not in combination with crash bars!
Fits R1200RT 2005-2009.

ArtNo. Description Price

0620 1 set anodized € 102,90
0621 1 set black anodized € 104,90
0622 1 set anodized with grid € 109,90
0623 1 set black anodized with grid € 114,90

Twin Tone Horn

This horn ensures with its 123,5 db that you get the
necessary respect and that you will not be overlooked.
Because of its E-approval mark it is street legal in the EU.
We also offer a mounting kit for the horn. This mounting
kit consists of a stainless steel mounting fitting for your
BMW R1200RT and the necessary ready-to-install wiring.
Doesn‘t work for models with alarm system if the alarm
system uses the original horn!

ArtNo. Description Price

11690120 Twin tone horn € 44,80
11690120R12RT Mounting and wiring € 49,00
(without horn)

Mirror catch cables

These cables are very easy to install and at the same
time very effective.
They protect the cables of the indicators and ensure that
they will not break, even in an accident.
You will save a lot of money as a new mirror for your bike
is not cheap.
Delivered as a set with fitting instructions.

ArtNo. Description Price

0600 Mirror catch cable € 10,50
1 set

286
 Clear Lenses
These clear lenses are sold as single items.
The brake and rear light lens is one piece and includes
the taillight and the two turning signals.
All lenses with E-mark.

ArtNo. Description Price

4642058 Clear indicator right € 42,90
05-09
4642059 Clear indicator left 05-09 € 42,90
7706408 Clear indicator right € 51,90
10-13
7706407 Clear indicator left 10-13 € 51,90
clhr1200rt Taillight with clear € 162,90
indicator lenses

Dash pad
Dash pad in carbon look. Protects this very visible part of
your bike from key scratches and enhances its
appearance. Scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80061 Dash pad € 8,30

Frame Infill Panels

Designed to fill the gap of your BMW R1200RT where
debris from the back wheel wants to come through
and mess you up! Finished in acrylic capped silver for
durability and looks. Uses existing fixing points. Both left
and right side in pack.

ArtNo. Description Price

240020A Pair of side covers silver € 88,40

www.mhornig.com 287
R 1200 RT 2005-2013
V-Stream Windshield
The „V-Stream“ windshield sets new standards for design,
technology and comfort.
Made of Quantum/Lexan Polycarbonate which is 10x
more scratch-resistant than usual acrylic.
The windscreen will be shipped with everything you need
to mount it.
Windshield V-Stream, clear, with homologation,
height 67 cm, width 60 cm.

ArtNo. Description Price

115101 V-Stream Windshield € 229,95

288
www.mhornig.com 289
R 1200 RT 2005-2013
Fork Crash Protectors
These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.
ArtNo. Description Price
FP101 Fork Crash Protectors € 68,90

Cardan Crash Protector

This crash protector for the cardan is made of CNC-lathed
plastic. It provides additional protection for your motorcy-
cle. You install the crash protector or pad on your cardan
with a stainless steel screw and an expansion holder.

ArtNo. Description Price

059-27 Cardan-Crash-Protector € 39,90

Reflection Foil ArtNo. Description Price

This set of reflection foils (4 pieces) increases the signal-
ling effect for the following traffic a lot. Your motorcycle is ReflektionR- Reflection foil silver € 21,90
immediately much more visible which increases also your RT-K12-13GT
passive safety a lot. The black foils look unremarkably ReflSchwR-RT- Reflection Foil black € 24,90
black during daylight, but also reflect in a striking silver/ K-13GT
white colour at night.

290
 You must send
your seat
to us!

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 291
R 1200 RT LC & R 1250 RT

R1200RT LC
built 2014-2018
1170 ccm cylinder capacity
power: 125 PS
max. torque 125 Nm

292
 R1250RT
built since 2019
1254 ccm cylinder capacity
136 HP
max. torque 143 Nm

www.mhornig.com 293
R 1200 RT LC & R 1250 RT

Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and off
the front of the engine. The fender extender solves this
problem effectively and elegantly. Made of tough ABS
plastic the extender attaches to the original fender with
expanding rivets which are of course included.
BMW R1200RT LC & R1250RT.

ArtNo. Description Price

054236 Extenda fender € 29,95

Suitcase Flat Lids

Suitcase flat lids are sold as a pair (left and right side).
These lids are designed for urban mobility. No more trou-
ble in traffic. We wished to reduce the original suitecase‘s
thickness for an easier driving between cars in urban
areas. Thickness:
Original BMW lid 17cm vs. Suitcase flat lids 6cm .
The total motorcycle width reduction is 22 cm!
Material: ABS plastics
Including stainless steel brackets, keep the original secu-
rity belt, foam sealed against dust and water.
Colour: glossy black (grounded, ready for painting).
BMW R1200RT LC & R1250RT.

ArtNo. Description Price

HRSSACO00222 Suitcase Flat Lids € 459,00

Tankbag UT810 with lock

TanklockED extendable tank bag for Enduro motorcycles,
capacity 25 ltr. High tenacity 1200D Polyester W / R and
polymer foam shell - Removable waterproof inner bag - 2
outer pockets with zipper closure - Front pocket for keys
and accessories - Pocket for Sat-Nav / mobile phone
included in the cover - Print incorporating a reflective
motif for increased visibility - Removable waterproof
map / tablet holder - Shoulder strap - Rain cover with
transparent window. You need tankbag mounting BF11 to
mount this tankbag. Tankbag mounting BF11 fits only for
fuel filler caps with 6 screws on the outside! Also fits with
Keyless Ride! BMW R1200RT LC & R1250RT.
ArtNo. Description Price
UT810 Tankbag UT810 € 209,00
BF11 Tankbag Mounting BF11 € 14,90

294
 11690120

1169012R12RTLC

Twin Tone Horn

This horn ensures with its 123,5 db that you get the necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small and easy to install. Because of its E-approval mark it is street
legal in the EU. We offer also a mounting kit for the horn. This mounting kit consists of a stainless steel mounting fitting
for your BMW R1200RT LC & R1250RT and the necessary ready-to-install wiring. Doesn‘t work for models with alarm
system if the alarm system uses the original horn! BMW R1200RT LC & R1250RT.

Twin Tone Horn (Wolo Bad Boy): Nautilus Stebel Horn:

12V 14A (non-stop operation) 12V 18A (non-stop operation)
Height 12cm; width 13cm; depth 8cm Height 12cm; width 13cm; depth 8cm

ArtNo. Description Price

11690120 Twin Tone Horn (Wolo Bad Boy) € 44,80
11690120s Nautilus Stebel Horn € 47,90
1169012R12RTLC Mounting and wiring (without horn) € 49,90

www.mhornig.com 295
R 1200 RT LC & R 1250 RT
Reflection Foil
This set of reflection foils (4 pieces) increases the signal-
ling effect for the following traffic a lot. Your motorcycle is
immediately much more visible which increases also your
passive safety a lot. The black foils look unremarkably
black during daylight, but also reflect in a striking silver/
white colour at night. BMW R1200RT LC & R1250RT.
ArtNo. Description Price
RefR12RTLC-K16 Reflection foil € 21,90
ReflSchwR12RTLC- Reflection Foil black € 24,90
K16

Cooler protection
Perfect protection for your cooler which looks nice, made
of high-quality aluminum.
The lattice is surrounded by a solid frame and keeps
insects or dirt away from the cooler.
2x cooler protection, scratch protection and fitting instruc-
tions are included. BMW R1200RT LC & R1250RT.

ArtNo. Description Price

Kg-12gs-LC silver € 75,50
Kg-12gs-LC-s black € 93,50

Rear wheel centre cover

Rear wheel centre lug cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

BMW R1200RT LC & R1250RT.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

296
GPS Mounting
You can mount your GPS fast and easily with our new GPS
mount for the BMW R1200RT LC and R1250RT.
The windscreen can still be used in all positions and your
navigation system is always in the best possible field of
vision. Our GPS mounts are very stable and they do not
allow vibrations.

Fits for all BMW Navigation Systems, Garmin SPIII, SP26**, 2720, Zumo 550, Zumo 590, Zumo 595, Zumo 660, Nüvi.
and X-Navi.
SP26** & 2720 owners need the Garmin motorcycle mount (016799 or 016869).
There are six M4 threads but only four are necessary to hold any GPS firmly in place.

“tomt-Ad Ed 2“: Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, 410, 420, 450,
500 & 550, Incl. screws for mounting in the GPS mount and the TomTom holder.

The adapter “ZumoAd340-350“ for all Garmin ZUMO 340, 345, 350, 390, 395 & 396.

ArtNo. Description Price

44012 GPS Mounting R1200R T LC & R1250RT € 79,80
ZumoAd340-350 Adapter for Garmin ZUMO 340, 345, 350, 390, 395 & 396 € 18,90
tomt-Ad Ed 2 TomTom 2 adapter € 15,90
ram-1zoll RAM 1 inch adapter € 34,90

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized. Easy to install.
BMW R1200RT LC & R1250RT.

ArtNo. Description Price

0729-2 Sidestand foot enlargement € 33,30

www.mhornig.com 297
R 1200 RT LC & R 1250 RT

Swing arm pivot covers

The covers will be installed with an expansion holder. You
use an Allen wrench to fasten the screw which expands
and o-ring which will keep the covers perfectly in place.
The unmounting is of course also easy and fast.
Shipment contains a set (2 pieces for left and right side).
BMW R1200RT LC & R1250RT.

ArtNo. Description Price

0525 silver anodized € 32,90
0526 black anodized € 31,90

Cardan Crash Protector

This crash protector for the cardan is made of CNC-lathed
plastic. It provides additional protection for your motorcy-
cle. You install the crash protector or pad on your cardan
with a stainless steel screw and an expansion holder.
BMW R1200RT LC & R1250RT.

ArtNo. Description Price

059-27 Cardan-Crash-Protector € 39,90

Frame Infill Panels

Designed to fill the gap of your BMW R1200RT LC &
R1250RT where debris from the back wheel wants to
come through and mess you up! Finished in acrylic
capped black for durability and looks. Uses existing fixing
points. Both left and right side in pack. BMW R1200RT LC
& R1250RT.

ArtNo. Description Price

7529J Pair of side covers black € 130,00

298
 Bar-end weights
These bar-end weights made of stainless steel or
aluminium show that BMW riders are aware of function
and form. Stainless steel 220 gram each,
aluminium 84 gram each.
Shipment: 2 end weights, 2 screws.
BMW R1200RT LC & R1250RT.

ArtNo. Description Price

0805 1 set stainless steel € 38,90
0806 1 set aluminium anodized € 29,90
0806

0805

ArtNo. Description Price

Frame cover left 0527 silver anodized € 15,40
This cover for the open hole beyond the swingarm pivot
is made of aluminium and available in silver or black 0528 black anodized € 15,60
anodized or in red or blue. It gets fixed on the left side. R-0527 red € 18,90
BMW R1200RT LC & R1250RT.
B-0527 blue € 19,50

www.mhornig.com 299
R 1200 RT LC & R 1250 RT

Oil filler plug with emblem ArtNo. Description Price

There is a drilling in the side of the plug in which you can
0245 anodized € 26,90
put a size 3 Allen key or a Torx key T10 (usually found
in your BMW toolkit) in order to fit and remove it. BMW 0246 black anodized € 26,95
R1200RT LC & R1250RT.

Oil filler plug

Oil filler plug Torx, made of high-quality aluminium. ArtNo. Description Price
Use a Torx tool T45 from your BMW tools in order to fit 0015 anodized € 23,90
and remove the oil filler plug. Choose between the polis-
0016 black anodized € 24,40
hed, the anodized and the black anodized version. BMW
R1200RT LC & R1250RT.

300
 Touring windshield
For long distance rides the Touring series was developped
to minimize the windblast against the rider. These screens
raise the windblast for several centimeters, allowing the
rider to keep a more comfortable position riding the
motorcycle. 695mm x 680mm (HxW) BMW R1200RT LC
& R1250RT.
ArtNo. Description Price
9512W clear € 129,90
9512H light tinted € 133,80
9512F dark tinted € 129,90

Vario Touring screen

This touring screen has a spoiler at the top of the airfoil;
the spoiler‘s angle can be adjusted. The air current de-
flected behind the spoiler reduces the otherwise annoying
turbulence.
Dimensions: 695mm x 680mm (HxW).
BMW R1200RT LC & R1250RT.

ArtNo. Description Price

9513H light tinted € 169,90

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized.
BMW R1200RT LC & R1250RT.
ArtNo. Description Price
0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80
Tector brake and clutch lever
The CNC milled Tector levers fascinate by their high func-
tionality and their elegant design.
Six-way adjustable for the gap to the handlebar, adjust-
able lever length (for 2 to 4 fingers), fixed fold-function
(only in the event of a crash), easy to mount, CNC milled,
extremely lightweight.
ArtNo. Description Price
HT-L44-R32-titan titanium-black € 179,95
HT-L44-R32-schwarz black-black € 179,95
HT-L44-R32-rot red-black € 179,95
HT-L44-R32-blau blue-black € 179,95

www.mhornig.com 301
R 1200 RT LC & R 1250 RT

Windscreen
ZTechnik‘s popular VStream windscreens are offered in two heights for the all-new watercooled R1200RT LC (2014-)!
While the stock screen (also manufactured by National Cycle for BMW) does an admirable job, the patented VStream
design is the ultimate windshield contour for comfort. VStream gets its name from the unique shape and dimensional
contours molded into the screen. The „V“ profile helps to keep the wind off your upper body and helmet.
With homologation. BMW R1200RT LC & R1250RT.

ArtNo. Description Price

Z2350 Clear, height 64,8 cm, width 48,9 cm € 239,00
Z2351 Clear, height 72,4 cm, width 52,2 cm € 279,95

Remus HexaCone
More than 1,5kg lighter compared to the original exhaust. Not only nice for the eyes, but also a powerful sound - the
HexaCone. With homologation.
For Euro 4! For R1200RT LC since 09/2016. Not for R1250RT!

ArtNo. Description Price

054882 088017 Remus HexaCone Titanium € 895,00

302
 Change front and rear seat
The driver‘s and pillion rider‘s seat are equipped with a
fluting in order to release the tail bone. The seats were You must send
also broadened for about 15mm. your seat
The padding consists of two layers, the upper one comfor- to us!
tably soft and the lower one avoids denting. We especially
took care of the pillion rider‘s comfort:
Here, the seat is increased in the middle front part to
inhibit a cramped position.
These alterations enable a tangible comfortable riding -
free from pain. Also the vexatious sliding when the driver
brakes has an end now.
The seats are slippage related material.

Available in three heights

(please note in the comment with the article number):
1: like your original one
2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)

It is also possible to change a seat with heater. ArtNo. Description Price

Your seat gets altered - you have to send it in! sitzF Driver’s seat black € 199,00
The change takes about 2 weeks.
sitzS Pillion’s seat black € 194,00
s-g Extra charge black-grey € 29,00
(for each seat)

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 303
R 1200 S & HP2 SPORT

R1200S
built 2006-2008
1170 ccm cylinder capacity
power: 122 PS
max. torque 112 Nm at 6800/min

304
 Our conversion for the sportiest BMW You will find a cooler grille, quick and easy
Boxer ever takes a nod from it forerunner, to fit, side stand enlarger, new number
the R1100S BoxerCup Replica. plate bracket and mini indicators.

For this bike we fit a specially developed There is a new rear hugger, suitable for
GRP spoiler, useful for road and circuit, 180 or 190 section tyres, which works well
which adds to the race look. to keep you and your bike clean.

The whole machine is repainted in Bo- Also of note are the adjustable footrests,
xerCup colours and topped by a host of white indicator lenses
extras, all special to this model. and a number of Aluminium parts.

www.mhornig.com 305
R 1200 S & HP2 SPORT

GPS Mounting with Plate GPS Mounting RAM-ball

This aluminium plug fits for BMW handlebars with an Plug for BMW handlebars with inside diameter of
inner diameter of 15-19 mm. 12-16 mm. Just insert the CNC-machined plug into the
Just insert the CNC-machined plug into the open part of open part of the handlebar (usually closed with a plastic
the handlebar (usually closed with a plastic plug). plug). The plug will stay in place thanks to an expansion
The plug will stay in place thanks to an aluminium fastener. Almost any navigation system can be fixed on
expansion fastener. the RAM-ball of this GPS mounting.
Garmin and TomTom Motorcycle GPS units can be moun- For R1200S.
ted without any problems. However, you can also adjust Colour: Black
the plastic plate very easily for other devices.
For R1200S.
Colour: Black
ArtNo. Description Price
ArtNo. Description Price NH 3/1 Black Plug € 39,90
NH 3/7sw GPS Mounting with Plate € 74,90

You can find the latest products and bar-

gains online: www.mhornig.com

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the rear mirrors. The mirrors
will be moved some centimeters away from each other in
order to improve the view to the back.
Material: POM plastics

ArtNo. Description Price

BK 09 1 set mirror extensions € 59,90
for HP2 Sport
BK 11 1 set mirror extensions € 59,90
for R1200S

306
 Shift lever extension
Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Rear wheel centre cover

Rear wheel centre lug cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

www.mhornig.com 307
R 1200 S & HP2 SPORT

Axle pivot Cover

This cover for the axle pivot gives a nice looking finish to
the rear end and gives your motorcycle a classy look.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

Telelever end caps

Aluminium cap, silver anodized or black anodized. We
send the caps in a set (2 parts).

ArtNo. Description Price

0295 1 set silver anodized € 30,90
0296 1 set black anodized € 30,95

Bar-end weights
These bar-end weights made of stainless steel or
aluminium show that BMW riders are aware of function
and form.
Stainless steel 220 gram each,
aluminium 84 gram each.
Shipment: 2 end weights, 2 screws.

ArtNo. Description Price

0805 1 set stainless steel € 38,90
0806 1 set aluminium anodized € 29,80

Cover
Covers for the fluid reservoirs.
You simply stick them onto the fluid reservoirs. Can be
removed them without residue. Made of high-quality
aluminium. Sold in a set of two.

ArtNo. Description Price

0701 1 set anodized € 41,90
0702 1 set black anodized € 41,50
s2ml Silicone 2ml € 0,75

308
 Engine cover
Made of 3mm aluminium with the latest laser-cutting and
bending technology. Available in 2 versions (with/without
grid) and in 2 colours (natural/black anodized).
Easy and fast mounting to the original attachment points.
1 set (for left & right side) incl. fasteners and install
instructions.
Note: Not in combination with crash bars!

ArtNo. Description Price

0620 1 set anodized € 102,90
0621 1 set black anodized € 104,90
0622 1 set anodized with grid € 109,90
0623 1 set black anodized with grid € 114,90

Wolo Very Loud Horn

This horn ensures with its 115 db that you get the necessary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small and easy to install. Because of its E-approval mark it is street
legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm; diameter 8,5cm.
ArtNo. Description Price
TM80BMW Wolo Very Loud Horn and wiring BMW R1200S € 69,90

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.

ArtNo. Description Price

0720 Sidestand foot enlargement € 34,90

www.mhornig.com 309
R 1200 S & HP2 SPORT

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0245 anodized € 26,90
0246 black anodized € 26,95

Oil filler plug

Oil filler plug Torx, made of high-quality aluminium.
Use a Torx tool T45 from your BMW tools in order to fit
and remove the oil filler plug.
Choose between the anodized and the black anodized
version.

ArtNo. Description Price

0015 anodized € 23,90
0016 black anodized € 24,40

Swing arm pivot cover left

This cover is the perfect replacement for the
original plastic cap.
Made of aluminium.

ArtNo. Description Price

0-4-15 anodized € 19,40
0-4-16 black anodized € 19,70

Swing arm pivot cover right

This cover is the perfect replacement for the
original plastic cap.
Made of aluminium.

ArtNo. Description Price

0-4-37 anodized € 19,90
0-4-38 black anodized € 19,80

310
 Speedometer Cover
In order to customize the speedo of your BMW R1200S.
Made of milled or laser-cut aluminium, anodized. Very
easy to mount with usual silicone. An install instruction
is included in the set for the speedo and the revolution
counter.
ArtNo. Description Price
0411-1 1 set anodized € 84,90
s10ml Silicone 10ml € 0,95

Frame cover
This cover for the open hole beyond the swing arm pivot is
made of aluminium and available in different versions.
It gets fixed on the right side.

ArtNo. Description Price

0440 anodized € 14,90
0441 black anodized € 14,90

Foot brake fluid reservoir cover

Cover for the foot brake fluid reservoir, CNC-machined of
aluminium.
Image shows K1200R.
It is also visible on R1200S.

ArtNo. Description Price

0706-1 anodized € 21,90
s2ml Silicone 2ml € 0,75

Oil cooler screen

This anodized aluminium screen protects the oil cooler
from stones, flies and other debris. It is very easy to
install and gives your R1200S an even more sporty
appearance.

ArtNo. Description Price

0606 Oil cooler screen € 20,90
s10ml Silicone 10ml € 0,95

www.mhornig.com 311
R 1200 S & HP2 SPORT

Lenses
Clear or grey lenses for the front indicators with 2 orange
bulbs. For R1200S.
Replacement bulb with orange coating 12V/16W.
With European approval mark.

ArtNo. Description Price

400.10.20w 1 set clear lenses € 69,90
400.10.20g 1 set grey lenses € 69,90

LED turning signals

Awesome brightness, fitted in seconds and including
electronics on the back of the panel to ensure the correct
flash rate. It is a complete turning signal and has a homo-
logation which makes it the first road legal LED for BMW
bikes! The LEDs flash yellow. Not compatible with BMW
LED turning signals. Sold in pairs (for left and right).
ArtNo. Description Price
01006 1 pair of LED turning € 84,95
signals with clear lenses
01006-g 1 pair of LED turning € 84,95
signals with grey lenses

Indicator lens
Indicator lenses. Sold in a set (2 pieces), but if you want,
also as single items.
With E-Mark, so they are homologated for the EU.
Shipping: 2 lenses incl. orange bulbs.

ArtNo. Description Price

CTS-0037 Clear indicator lens € 21,90
CTS-0037-g Grey indicator lens € 21,90
3552-778-1 4 lens head screws € 1,80

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator (usually
used with transparent lenses). Single.
ArtNo. Description Price
BLWB-CBUS BLWBT-CBUS BLWB-CBUS orange 12V/10W € 2,80
BLWBT-CBUS special coated 12V/10W € 5,99
10031086 orange coated € 3,95
12V/18W only front
WLG-194 chrome colour € 7,90
10031086 WLG-194
12V/18W only front

312
 Racingscreen
The racing screen has basically the same shape like the
original one, but a little increase in the middle to reduce
the wind pressure on the helmet.
With ABE, length 375 mm.

ArtNo. Description Price

4025066112050 clear € 84,90
4025066112067 smoke grey € 84,90
4025066112098 black € 84,90

Touringscreen
The touring shield has the same shape as the original,
but with an additional raised wind deflector at the rear,
which covers the entire width. This deflects the wind over
the rider and facilitates a relaxed drive, particularly on
longer trips.
With ABE, length 410 mm.
ArtNo. Description Price
4025066117307 clear € 84,90
T-R1200S-rg smoke grey € 84,90
4025066117376 black € 84,90

www.mhornig.com 313
R 1200 S & HP2 SPORT

Rear Hugger
Fits between the rear shock and wheel and extends
rearwards to end near the end of the exhaust. Designed
specifically to keep road debris and water from the backs
of the rider‘s/passenger‘s legs, shock, gearbox, battery
and so on. It can be painted in any colour you like
and fits 180 and 190 tyres.

ArtNo. Description Price

40095 Rear hugger black primed € 204,90

Engine spoiler
Made of high-quality fibre-glass reinforced synthetic
material and primed or manufactured of carbon fibre.
Easy to install. Incl. all fasteners and install instructions.

If you have no silicone you can also order our high-quality

silicone which is pre-filled in the volume you need and
easy to dose.

ArtNo. Description Price

40110 GRP Engine spoiler € 398,00
40111 Grille € 19,90
s10ml Silicone 10ml € 0,95
(you need it 2x)

314
 Dash pad
Carbon look. Protects this very visible part of your bike
from your keys and enhances its appearance with this
scratch-resistant, self-adhesive pad.
For R1200S.

ArtNo. Description Price

80082 Dash pad € 10,90

Carbon Alternator Cover

Extremely robust, nice cover for the alternator.
It is produced of light carbon fibre
and quite easy to install.
Fits all 4V-boxer.

ArtNo. Description Price

110580 Alternator cover € 249,90

Carbon Reservoir Cover Kit

Cover kit for reservoirs of brake and clutch fluid reservoirs
with carbon surface. The carbon fibre parts are precisely
shaped and are to be fitted by glue.

ArtNo. Description Price

400.10.40 1 set reservoir covers € 59,00
s2ml Silicone 2ml € 0,75

Carbon Brake line cover

This cover protects the brake line of your
R1200S (all MYs) in the best possible
and best looking way.

ArtNo. Description Price

110680 Brake line cover € 139,90

www.mhornig.com 315
R 1200 S & HP2 SPORT
ABS resin mud guard R1200S
This solid rear hugger is made of ABS resin plastics and
provides perfect protection for your suspension, your
exhaust, your header and for the whole rear part of your
bike. Not to forget your pillion rider!
Everything you need for installation is included.
With ABE (European homologation).

ArtNo. Description Price

5861N ABS resin mud guard € 199,90

Carbon Tank Centre Panel R1200S

This cover for the middle part of the tank is made of
carbon fibre which looks very sporty, but is quite resistant
to scratching.

ArtNo. Description Price

TAO.004.R120S.K Tank centre panel € 409,90

Carbon Engine spoiler R1200S

Made of high-quality carbon fibre. Easy to install.
Incl. all fasteners and install instructions.

ArtNo. Description Price

VEU.010.R120S.K Engine spoiler € 869,90

Carbon Rear mudguard HP2 Sport

Provides ultimate protection for the rear shock absorber!
Spend less time for cleaning and more time for riding!
The best possible fit is provided by an
stainless steel fastener. Fits BMW HP2 Sport.

ArtNo. Description Price

KHO.001.HP2SP.K Rear mudguard € 299,90

316
 Carbon Rear mudguard R1200S
Provides ultimate protection for the rear shock absorber!
Spend less time for cleaning and more time for riding!
The best possible fit is provided by an
stainless steel fastener. Fits 180 and 190 rear tyre and
can be used with and without ESA.

ArtNo. Description Price

KHO.001.R120S.K Rear mudguard € 299,90

Carbon Front Mudguard R1200S

Made of nice looking and high-quality carbon fibre.
It is very light and makes a brilliant looking addition to
your bike.

ArtNo. Description Price

KVO.012.R120S.K Front mudguard € 269,90

www.mhornig.com 317
R 1200 S & HP2 SPORT
Fork Crash Protectors R1200S
These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.
ArtNo. Description Price
FP101 Fork Crash Protectors € 68,90

Cardan Crash Protector

This crash protector for the cardan is made of cnc lathed
plastic. It provides additional protection for your motorcy-
cle. You install the crash protector or pad on your cardan
with a stainless steel screw and an expansion holder.

ArtNo. Description Price

059-27 Cardan-Crash-Protector € 39,90

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You must send

your seat
to us!

318
 You need a tank bag, rear seat bag, duffel bag,
inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 319
R 1200 ST

R1200ST
built 2005-2007
1170 ccm cylinder catalytic
power: 81/110 PS
max. torque 115 Nm

320
 GPS Mounting
Bolt + RAM-ball with M10 thread. CNC-machined for
TomTom and Garmin Zumo GPS devices. You can mount
all RAM-mounts on the RAM-ball.
Colour: Black
Can just be mounted with the mirror extensions BK 02,
as you see in the picture.

ArtNo. Description Price

NH 1/6 GPS mounting black € 27,95
BK 02 Mirror extension € 49,95
1 set

Rear wheel centre cover

Rear wheel centre lug cover with emblem.

The holes in the covers serve for cooling!

The lower temperature is based on the special angles of
the drillings, which cause a more concentrated air flow.
But don‘t be worried - it does not affect
the drivability of your BMW.

ArtNo. Description Price

0216 anodized € 74,90
0316 black anodized € 76,80

Frame cover
This cover for the open hole beyond the swing arm pivot is
made of aluminium and available in different versions.
It gets fixed on the right side.

ArtNo. Description Price

0440 anodized € 14,90
0441 black anodized € 14,90

www.mhornig.com 321
R 1200 ST

Oil filler plug with emblem

There is a drilling in the side of the plug in which you can
put a size 3 Allen key or a Torx key T10 (usually found in
your BMW toolkit) in order to fit and remove it.

ArtNo. Description Price

0245 anodized € 26,90
0246 black anodized € 26,95

Oil filler plug

Oil filler plug Torx, made of high-quality aluminium.
Use a Torx tool T45 from your BMW tools in order to fit
and remove the oil filler plug.
Choose between the anodized and the black anodized
version.

ArtNo. Description Price

0015 anodized € 23,90
0016 black anodized € 24,40

Swing arm pivot cover left

This cover is the perfect replacement for the
original plastic cap.
Made of aluminium.

ArtNo. Description Price

0-4-15 anodized € 19,40
0-4-16 black anodized € 19,70

Swing arm pivot cover right

This cover is the perfect replacement for the
original plastic cap.
Made of aluminium.

ArtNo. Description Price

0-4-37 anodized € 19,90
0-4-38 black anodized € 19,80

322
 Stainless Steel Crash bars
These stainless steel engine guards will, unlike powder-
coated steel guards, never rust. They are carefully
designed to allow clearance for oil changes or valve cover
access, so they never need to be removed. Guards attach
to the engine mounts, not the engine covers, to protect
the engine heads and not destroy them. Integrated top
brackets on each guard allow the rider to mount acces-
sory lights, video cameras, or whatever they can imagine!
Does not fit for some pre-series of R1200ST (see online
shop).

ArtNo. Description Price

Z7101 Stainless Steel Crash bars € 329,90

Superbike handlebars
These handlebars create a new sporty look and improve
the handling of the bike.
The mounting kit is made of high-quality aluminium and
the bars are especially designed for the R1200ST.
The handlebar is 70mm closer and 100mm higher.

ArtNo. Description Price

AC-R1200ST Superbike handlebars € 399,00

Sidestand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand foot enlargement.
More than 100% bigger contact area.
Made of high-quality aluminium.
Black anodized.
Easy to install.

ArtNo. Description Price

0710 Sidestand foot enlargement € 32,90

www.mhornig.com 323
R 1200 ST

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,90
19x3 O-ring (4 pieces) € 2,80

Axle pivot Cover

This cover for the axle pivot for all new R1200, K1200
and K1300 bikes gives a nice looking finish to the rear
end and gives your motorcycle a classy look.

ArtNo. Description Price

0172 anodized € 22,90
0272 black anodized € 22,90

Brake pedal enlargement

Nicely machined aluminium, knurled and
natural anodized.
This enlargement simply slips on and is held in place
with a set-screw. You can also secure the brake pedal
extension using some silicone.
ArtNo. Description Price
0180 anodized € 24,50

324
 Engine cover
Made of 3mm aluminium with the latest laser-cutting and
bending technology. Available in 2 versions (with/without
grid) and in 2 colours (natural/black anodized).
Easy and fast mounting to the original attachment points.
1 set (for left & right side) incl. fasteners and install
instructions.
Note: Not in combination with crash bars!
ArtNo. Description Price
0620 1 set anodized € 102,90
0621 1 set black anodized € 104,90
0622 1 set anodized with grid € 109,90
0623 1 set black anodized with grid € 114,90

Mirror Extensions
Our mirror extensions are the perfect solution
if you mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear.

ArtNo. Description Price

BK 02 Mirror extensions € 49,95
1 set (M10)

Stainless steel end weight

These end weights are made of stainless steel and
create a noble look for your bike. Included are two
stainless steel end weights.
Stainless steel: each 260 grams

ArtNo. Description Price

0452 Stainless steel end weights € 49,80

www.mhornig.com 325
R 1200 ST

V-Stream Windshield
The „V-Stream“ windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan Poly-
carbonate which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it. With the original handlebar, the
mirror extensions BK 02 are required.
Windshield V-Stream, with homologation.
(Height of 31cm measured from top of head light to top
of windshield)

ArtNo. Description Price

115103 Clear, height 31cm, € 189,95
width 49cm

Indicator bulb
Either orange or special coated. The special coated one
only lights orange when you use the indicator
(usually used with transparent lenses).
For your R1200ST use front 12V/21W and rear
12V/10W. 1 piece.
BLWB-CBUS BLWBT-CBUS ArtNo. Description Price
BLWB orange 12V/21W front € 2,95
BLWBT special coated bulb € 9,90
12V/21W front
BLWB-CBUS orange 12V/10W rear € 2,80
BLWB
BLWBT-CBUS special coated bulb € 5,99
12V/10W rear
BLWBT

326
 Dash pad
Carbon look. Protects this very visible part of your bike
from your keys and enhances it‘s appearance with this
scratch-resistant, self-adhesive pad.

ArtNo. Description Price

80062 Dash pad € 14,40

Carbon Reservoir Cover Kit

Cover kit for reservoirs of brake and clutch fluid with car-
bon surface. The carbon fibre parts are precisely shaped
and are to be fitted by glue.

ArtNo. Description Price

400.10.40 1 set reservoir covers € 59,00
s2ml Silicone 2ml € 0,75

Front lifter
Our front lifter fits BMW R1200ST.
It is perfect for care, overwintering and servicing.
Made of steel 35x35mm, zinc-plated and quality
„Made in Germany“.

ArtNo. Description Price

2039-80 Front lifter € 114,00

Back lifter
Slide the rubber coated pipe of the back lifter into the
final drive of your BMW and lift it up. Easy to use by one
person and very stable support for the bike.
Made of high-quality steel. Diameter 42mm, zinc-plated.
The diameter of the rubber is 52,5mm.

ArtNo. Description Price

BT.heck-lifter Back lifter € 89,00

www.mhornig.com 327
R 1200 ST
You must send
your seat
to us!

How do you sit on your motorcycle seat? Do you want to change something in your seat?

Then read through the pages of the catalog SEAT ALTERATION.

We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

328
S 1000 RR

S1000RR
built since 2009
999 ccm cylinder capacity
power: 193 PS
max. torque 112 Nm at 9.750 U/min

330
 Plates S1000RR (2009-2018)
Set of plates „RR“ for BMW S1000RR.
The plates are mounted on the drillings of the passenger‘s
footpeg holders. Laser-cut parts, made of stainless steel,
include stainless steel round head screws.

Shipment includes:
- 2x plate „RR“
- 2x sticker red
(other colours are also possible - contact us!)
- 4x round head screw

ArtNo. Description Price

208RR Plates S1000RR € 24,90

Registration Plate Holder

S1000RR (2009-2018)
A better view of the rear wheel is possible thanks to the
stable stainless steel registration plate holder which bolts
onto the standard support. Without registration, it fulfills
all requirements for legal fitment and can be used with
standard flashers and most accessory components.
ArtNo. Description Price
S426- Registration plate holder € 139,90
67168-15

Synto brake- and clutch lever

S1000RR (2009-2018)
Synto is the name of the 6x adjustable CNC high-
precision brake and clutch made of aluminium.
Combines elegance and functionality. Handling pure!
* 6 x adjustable CNC high-precision levers
* Racing proven Extremely light weight / 60g per lever
* CNC-milled from high tech aeronautical norm
aluminium EN 2017
* Perfect design – convincing finish
* Brilliant control feeling * Aerodynamic louver
* Levers ca. 1 cm shorter than original
* Predetermined breaking point at long version
* Adjuster colour is always black, only the black lever has
a silver adjuster * For brake and clutch
* Including street homologation TÜV part certificate (ABE)

ArtNo. Description Price

BH29-KH39-15-11-L black-silver € 198,00
BH29-KH39-17-15-L red-black € 198,00
BH29-KH39-14-15-L blue-black € 198,00

www.mhornig.com 331
S 1000 RR

Footrest System S1000RR 2009-2014

This GP footrest system is incl. TUV certificate - original
micro switch and heel guards to be continued to use.
The article numbers FXR-BM01-* are with usual shifting
and the article numbers FXR-BM01-P-* are with gp-
shifting. „P“ version: lower fairing needs a cut out and
only in combination with BMW quick shifter! Otherwise
the separate gear shaft kit needs to be ordered.

There is a video for this product online: www.mhornig.com

ArtNo. Description Price

FXR-BM01-B aluminium € 390,00
black anodized
FXR-BM01-P-B with gp shift € 410,00
black anodized
USW-Kit Gear shaft kit € 75,00

Reverse Shifting Kit S1000RR 2009-2014

With this kit you can change your shifting easily into a
reverse shifting (also called GP-shifting). The kit can be
used with the original shifting system, but also with the
BMW HP shifting system.
Lower fairing needs a cut out - only in conjunction with
BMW quick shifter - otherwise you need to order the gear
shaft kit, too.

ArtNo. Description Price

US-21-K46-B black € 149,90
USW-Kit Gear shaft kit € 75,00

Oil Filler Plug

This oil filler plug is made of high-quality aluminium
and available in two colours: black anodized or silver
anodized. You can open this oil filler plug
with a Torx T45.

ArtNo. Description Price

0025 black anodized € 20,50
0024 silver anodized € 20,60

332
 Tail / Rear Seat Bag
Designed to fit perfectly on the rack or rear seat and with
the feature of expansion to allow even more capacity!
There is space for more than just the rain gear here -
expands from 1 litres up to 3.5 litres.Waterproof material,
reflective strips, attractive grey and black colour scheme
and the chord helps you to carry the bag.
Dimensions: approx. 19x22x11cm

ArtNo. Description Price

STBMW3 Tail / Rear Seat Bag € 42,90
ZXS319 Rain Protection Cover € 8,95

Crash Protectors S1000RR (2009-2018)

The crash cap is made of special plastic for best sliding
characteristics. The design pad does not only look good
but also provides maximal protection for the rider, frame
and engine of your BMW S1000RR because of its paten-
ted impact inlay. This protection cannot be provided by
any other crash protectors!
ArtNo. Description Price
IP-BM06-B 2009-2011 € 135,00
IP-BM07-B 2012-2014 € 235,00
IP-BM09-B 2015-2018 € 149,00

www.mhornig.com 333
S 1000 RR
Fork Crash Protectors
These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.
ArtNo. Description Price
FP100 Fork Crash Protectors € 64,90

Mirror Extensions S1000RR (2009-2018)

Our mirror extensions (30mm) are the perfect solution if
you mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear.
Material: POM plastics
ArtNo. Description Price
BKB 03 Mirror extensions € 59,95
1 set

Mirror Caps S1000RR (2009-2018)

Add a sleek look to your bike with Hornig mirror caps.
Made of POM (synthetic material and extreme light),
these lightweight mirror caps fill the gap left when remo-
ving mirrors during race prep. They will be delivered with
everything you need in order to install them.
1 set (left and right).

ArtNo. Description Price

0335 Mirror caps € 25,90
1 set

Cooler screen
Perfect protection for your oil cooler which looks quite
nice and is designed of high-quality aluminium and
covered with a special protective aluminium alloy.
Install instruction is included.

Will be installed with 4 zip ties.

ArtNo. Description Price

0608 S1000RR 2009-2018 € 29,90
0610 S1000RR 2019- € 29,90

334
 Fork Lift Stand / Rear Stand
The fork lift stand and the rear stand are perfect for care,
overwintering and servicing. They are made of solid steel
35x35mm, galvanized and quality „Made in Germany“.
A huge advantage of these stands is the fact
that you can change the height.
4 large solid wheels provide the necessary stability.

ArtNo. Description Price

2039-80 Fork Lift Stand € 114,00
2039-52 Rear Stand € 104,90

Strap Holder S1000RR (2009-2018)

This strap holder is milled of aluminium, bent, black
anodized and you mount it instead of the pillion rider‘s
pegs. We developed this strap holder in order to fix our
Race-S1000RR easily and fast in our truck, but you can
of course also mount your luggage there.
One set for left and right.

ArtNo. Description Price

0285 1 set strap holder € 49,90

LED Rear Light S1000RR (2009-2018)

This LED rear light for your BMW S1000RR is available in
two different versions.

ArtNo. Description Price

01155 LED Rear Light clear € 89,95
01153 LED Rear Light smoked € 109,90

LED Fairing Turning Signals 2009-2014

You simple glue these LED fairing turning signals into the
turning signal space in front of the S1000RR‘s fairing
with a 3M foil. The indicators have an E-mark and are
road legal. For models 2015-2018, please also order the
distances 1582D.

ArtNo. Description Price

1580 Grey LED fairing turning signals € 64,90
1581 Clear LED fairing turning signals € 64,80
1582D Distances for turning signals € 15,90

www.mhornig.com 335
S 1000 RR
Race Track Sticker S1000RR (2009-2018)
These stickers for the race track are made of high-quality
black film which is also UV-resistant. Available for the
front lights and the turning signals.

ArtNo. Description Price

aufk-s1000rr-front Stickers lights € 12,90
09-14
aufk-s1000rr-blinker Stickers turning € 10,50
signals (4x) 09-14
aufk-s1rr15-front Stickers lights € 12,90
15-18

Racingscreen S1000RR 2009-2014

This racing screen for the BMW S1000RR is 7cm longer
and 3 cm higher than the original screen. The total length
is 43cm. This screen was successfully used in the SBK
World Championship 2009.

ArtNo. Description Price

4025066123810 clear € 84,90
4025066123827 smoke grey € 84,90
4025066123841 black € 84,90

GPS Mount
Just screw this GPS mount onto the dash.
The necessary thread is already there. Almost any naviga-
tion system can now be fixed on the RAM-ball (1“) of this
GPS mounting.
ArtNo. Description Price
NH 3/1 15mm GPS mount € 39,90
(black-silver)
NH 3/1 GPS mount € 39,90
(black-black)

GPS Mounting with Plate

Just screw this GPS mount onto the dash. The necessary
thread is already there. Garmin and TomTom motorcy-
cle GPS units can be mounted without any problems.
However, you can also adjust the plastic plate very easily
for other devices.

ArtNo. Description Price

NH3-4 GPS Mount € 79,90

336
 ATTENTION !!! For all who use their S1000RR on the race track:
In our web shop www.mhornig.com you can find
GRP race fairings and much more!

Crash Protectors Slider

Our protectors or sliders protect your frame, engine and
fairing of your motorcycle. This pad is designed to fit
perfectly to your motorcycle. It is made of high-strength
milled aluminium and high-strength POM plastic. All
our pads are screwed to your motorcycle at least at 2-3
points. The advantage over round crash protectors is that
these slider cannot break or snag on something on the
road. Shipment: Crash protectors for the left and right
side with mounting.

ArtNo. Description Price

RLBM01-S1000RR S1000RR 2010-11 € 279,00
RLBM05 S1000RR 2012-14 € 279,00

Engine Crash Protectors

S1000RR (2009-2018)
These engine crash protectors for the left and right side
provide extra protection for your motorcycle. The pads
are made of milled state-of-the-art aluminium which is
high-strength.
Shipping includes crash protectors for the left and right
side plus mounting.
ArtNo. Description Price
SCBM01 Engine crash protectors € 179,00

Front and Rear Crash Protectors

These pads for the front and rear part of your motorcycle
are CNC-lathed. They are made of high-quality POM pla-
stic. The mounting is made of aluminum and anodized.
The crash protectors provide extra protection and reduce
damage to your motorcycle.
Shipment includes both pads and mounting.

ArtNo. Description Price

PRBM01 Front and rear pads € 130,00

www.mhornig.com 337
S 1000 RR
Carbon Rear Hugger

Carbon Swingarm Cover Carbon Engine Spoiler

Carbon
Front Mudguard

Carbon Clutch Cover

Carbon Numberplate Holder Carbon Alternator Cover

Carbon Seat Unit Racing

Carbon
Front Fairing

338
Carbon Fibre Fairings for S1000RR (2009-2018)
The S1000RR is the first real superbike of BMW motorcycle.
We have products for the S1000RR that are especially made for the race track (without ABE),
but also articles with street homologation (with ABE).
The items are made of high-quality carbon fibre and are covered with UV-resistant clear lacquer.

You can find more carbon fibre fairings online: www.mhornig.com

ArtNo. Description Price

KHO.017.S100S.K Rear Hugger without ABS - Street € 269,90
KHO.032.S100S.K Rear Hugger with ABS - Street € 269,90
KHO.068.S1RAB.K Rear Hugger without ABS - Race Track € 219,90
KHO.078.S1RAB.K Rear Hugger with ABS - Race Track € 219,90
SCA.022.S100S.K Swingarm Cover left and right - Street € 249,90
SCA.073.S1RAB.K Swingarm Cover left and right - Race Track € 199,90
VEU.012.S10SR.K Bellypan right side - Street (2009-2014) € 349,90
VEU.013.S10SL.K Bellypan left side - Street (2009-2014) € 349,90
VEU.060.S1RST.K Bellypan right side - Race Track (2009-2014) € 289,90
VEU.061.S1RST.K Bellypan left side - Race Track (2009-2014) € 289,90
KVO.016.S100S.K Front fender - Street € 249,90
KVO.067.S1RAB.K Front fender - Race Track € 199,90
TAO.040.S100S.K Upper Tankcover - Street (2009-2014) € 219,90
TAO.088.S1RAB.K Upper Tankcover - Race Track (2009-2014) € 179,90
SDR.019.S100S.K Tank Side Panel right - Street (2009-2014) € 259,90
SDL.020.S100S.K Tank Side Panel left - Street (2009-2014) € 259,90
SDR.070.S1RAB.K Tank Side Panel right - Race Track (2009-2014) € 199,90
SDL.071.S1RAB.K Tank Side Panel left - Race Track (2009-2014) € 199,90
NHO.024.S100S.K Number plate Holder € 229,90
LMD.029.S100S.K Alternator Cover - Street € 179,90
LMD.075.S1RAR.K Alternator Cover - Race Track € 149,90
KDA.031.S100S.K Clutch Cover - Street € 159,90
KDA.077.S1RAR.K Clutch Cover - Race Track € 129,90
SIO.062.S1RAB.K Seat Unit Racing (2010-2011) € 419,90
VEO.001.S100S.K Front Fairing - Street (2009-2014) € 499,90
VEO.054.S1RST.K Front Fairing - Race Track (2009-2014) € 369,90

www.mhornig.com 339
S 1000 RR
Exhaust holder stainless steel for BMW
S1000RR 2015-2016
You don‘t need to use the pillion rider‘s foot peg holder
any longer with this exhaust holder made of stainless
steel. It fits for the AC Schnitzer STEALTH exhaust S5702
101360 for BMW S1000RR (2015-2016) and the Rem-
us HyperCone exhausts for BMW S1000RR (2015-2016)
056802 087015 and 056702 087015.

ArtNo. Description Price

21375-101 Exhaust holder stainless € 49,00
steel

Remus HyperCone S1000RR (09/2016-2018)

The brand new REMUS HyperCone with conical silencer body is the clear development of the market-proofed REMUS
HexaCone and marks the upper end of the REMUS motorcycle high performance silencers. The innovative highlights of
the REMUS HyperCone are the carbon outlet cap in combination with a titanium or stainless steel sleeve, the hexago-
nal design of the outlet cap and the conical silencer body, guaranteeing maximum ground clearance whilst cornering.
The REMUS HyperCone is EC approved and offers in addition to the well known sonorous REMUS sound a perfor-
mance and torque increase and convinces with a weight of just 1,3 kg in the titanium version.

BMW S1000RR (09/16-2018)

For Euro 4!

ArtNo. Description Price

056602 087017 slip on, stainless steel € 624,00
056702 087017 slip on, stainless steel black € 679,00
056802 087017 slip on, titanium € 751,00

340
 You need a tank bag, rear seat bag, duffel bag,
inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 341
S 1000 R

S1000R
built since 2014
999 ccm cylinder capacity
power: 160 PS
max. torque 112 Nm

342
 We will present our brand new BMW The mirror extensions make sure that you
S1000R conversion for the first time at the can see the traffic behind you and not
Intermot 2014 in Cologne, Germany. The only your shoulders. Our handlebar GPS
BMW S1000R is a great and sporty naked Mounting positions your GPS unit near
bike by BMW Motorrad. your sight field.
Our focus for this conversion was on more Our cooled protection protects your cooler
comfort and at least a bit more touring for stones and dirt. Our protectors on en-
capability as well as that it does not look gine, swing arm and fork are not just good
like any other S1000R out there. looking but offer also more protection and
For better ergonomics we installed a security.
higher windshield which offers more wind
protection. With the footrest system from Highlights are our polished oil filler plug,
Gilles Tooling you can lower the footpegs blue Synto brake and clutch levers as well
and have a much better seating position. as the small LED front turning signals and
Additional to those parts we altered the the grey LED rear light.
standard seats for more comfort and the The polished stainless steel exhaust
tank bag with easy and fast ring-mounting HyperCone from Remus makes sure that
offers some storage space. our S1000R has the necessary power and
sound.

www.mhornig.com 343
S 1000 R

Carbon Fibre Rear Fender

This rear hugger is made of high-quality carbon fibre
and covered with UV-resistant clear lacquer. The article
numbers KHO.017.S100S.K and KHO.032.S100S.K
have an ABE/street homologation. The article numbers
KHO.068.S1RAB.K and KHO.078.S1RAB.K are especially
made for the race track. The rear huggers are available for
bikes with and without ABS. The chain guard is connected
to the rear hugger. This rear hugger is longer than the
original rear hugger.

ArtNo. Description Price

KHO.017.S100S.K no ABS - street € 269,90
KHO.032.S100S.K with ABS - street € 269,90
KHO.068.S1RAB.K no ABS - track € 219,90
KHO.078.S1RAB.K with ABS - track € 219,90

Carbon Fibre Bellypan 2017-

This bellypan is made of high quality carbon fibre and
covered with UV resistant clear lacquer. The whole pro-
duct is made of one piece and specially designed for the
street. It has ABE/street homologation and you can use it
with the original BMW pre-muffler and you can use it with
the original sidestand. In order to mount the spoiler you
have to order the fairing holder article no.
VEH.208.S117N.K.

ArtNo. Description Price

VEU.005.S117N.K Bellypan € 699,90
VEH.208.S117N.K Fairing Holder € 32,90

Carbon Fibre Bellypan 2014-2016

This bellypan is made of high-quality carbon fibre and
covered with UV-resistant clear lacquer. The whole pro-
duct is made of one piece and is especially designed for
the street. It has ABE/street homologation. You can use
it with the original BMW pre-muffler and with the original
sidestand. In order to mount the spoiler you have to order
the fairing holder (article no. VEH.299.S100N.K.).

ArtNo. Description Price

VEU.215.S100N.K Bellypan € 679,90
VEH.299.S100N.K Fairing holder € 32,90

344
 Carbon Fibre Front Fender
This front fender is made of high-quality carbon fibre and
covered with UV-resistant clear lacquer. Article number
KVO.016.S100S.K has an ABE/street homologation.
Article number KVO.067.S1RAB.K is especially made for
the race track.

ArtNo. Description Price

KVO.016.S100S.K Street € 249,90
KVO.067.S1RAB.K Race track € 199,90

Carbon Fibre Rear Light Cover

This rear light cover is made of high-quality carbon
fibre. This part is a direct replacement for the original
component and contributes mainly to weight saving on
the motorcycle (up to 70% less) and a higher stiffness
of the parts.

ArtNo. Description Price

SIO.213.S100N.K Rear light cover € 159,90

Plates S1000R
Set of plates „R“ for BMW S1000R.
The plates are mounted on the drillings of the
passenger‘s footpeg holders. Laser-cut parts, made of
stainless steel, include stainless steel round head screws.

ArtNo. Description Price

208R Plates S1000R € 24,90

Oil Filler Plug

This oil filler plug is made of high-quality aluminium
and available in two colours: black anodized or silver
anodized. You can open this oil filler plug
with a Torx T45.

ArtNo. Description Price

0025 black anodized € 20,50
0024 silver anodized € 20,60

www.mhornig.com 345
S 1000 R
Fork Crash Protectors
These crash protectors for forks are made of CNC-lathed
plastic (POM). The mounting is made of CNC-milled and
anodized aluminium.
These crash protectors provide additional protection for
your fork.
Shipment includes the crash protectors (left and right)
and the mounting.

ArtNo. Description Price

FP100 Fork Crash Protectors € 64,90

Engine Crash Protectors

These engine crash protectors for the left and right side
provide extra protection for your motorcycle. The pads
are made of milled state-of-the-art aluminium which is
high-strength.
Shipping includes crash protectors for the left and right
side plus mounting.

ArtNo. Description Price

SCBM01 Engine Crash Protectors € 179,00

Crash Protector
These crash protectors offer the best possible protection
if a crash was not avoidable. The brand new compound
plastic can absorb forces of a crash without braking.
These crash protectors are not only very usable, but also
good looking. The crash protectors are for the left and the
right side and you can mount them quite fast and easily.
They come with a special holder, so no drilling or cutting
the fairing is necessary.
ArtNo. Description Price
7061N Crash protector 2014-2016 € 127,00
9488N Crash protector 2017- € 119,00

Handlebar Risers
Raising the handlebar by 20mm results in a more upright,
much more relaxed seating position. The adjustment
range of the handlebar angle is increased, which further
increases the rider‘s comfort. Easy to fit in minutes. No
need for longer cables or brake cables!
With homologation!

ArtNo. Description Price

365-3100 Risers 20mm (2014- € 58,90
2016)
365-3101 Risers 20mm (2017- ) € 64,90

346
 Sport Windshield
For sporty rides PUIG introduces the Sport series to have
regular and constant air flow around and towards the
helmet. This will reduce turbulences and give you a more
sporty feeling.
17 cm higher than the original windscreen.
ArtNo. Description Price
7040W clear € 95,50
7040F smoked grey € 95,50
7040N black € 95,50

ZTechnik Windshield
The V-Stream windshield sets new standards for design,
technology and comfort. Made of Quantum/Lexan poly-
carbonate which is 10x more scratch-resistant than usual
acrylic. The windscreen will be shipped with everything
you need to mount it.
Windshield V-Stream, with homologation.

ArtNo. Description Price

Z2483 Light tint, height 38,1cm € 189,95
Z2482 Dark tint, height 31,1cm € 159,95

LED Rear Light

This LED rear light for your BMW S1000R is available in
two different versions.

ArtNo. Description Price

01155 LED rear light clear € 89,95
01153 LED rear light smoked € 109,90

LED Fairing Turning Signals

You simple glue these LED fairing turning signals into the
turning signal space in front of the S1000R‘s fairing with
a 3M foil. The indicators have an E-mark and are road
legal. Shipment: 2x LED fairing turning signals, 2x 3M foil.
For models 2015 and up, please also order the distances
1582D.
ArtNo. Description Price
1580 Grey LED fairing turning signals € 64,90
1581 Clear LED fairing turning signals € 64,80
1582D Distances for turning signals € 15,90

www.mhornig.com 347
S 1000 R

Shift lever extension

Many BMW riders think that their shift lever is a little too
thin and does not give enough grip when they are shifting.
This enlarger will solve this problem for you as it offers
more grip and a more sporty look for your bike. Available
in anodized.

ArtNo. Description Price

0390 anodized € 25,90
0395 anodized with o-rings € 28,80
19x3 O-ring (4 pieces) € 2,80

Registration Plate Holder

A better view of the rear wheel is possible thanks to the
stable stainless steel registration plate holder which bolts
onto the standard support. Without registration, it fulfills
all requirements for legal fitment and can be used with
standard flashers and most accessory components.

ArtNo. Description Price

S426- Registration plate holder € 139,90
67168-15

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear.

ArtNo. Description Price

BK02LC 1 set mirror extensions € 49,95

348
Tail-, Rear Seat Bag
Designed to fit perfectly on the rack or rear seat and with the feature of expansion to allow even more capacity! There
is space for more than just the rain gear here - expands from 1 litres up to 3.5 litres.Waterproof material, reflective
strips, attractive grey and black colour scheme and the chord helps you to carry the bag.
Dimensions: approx. 19x22x11cm
ArtNo. Description Price ArtNo. Description Price
STBMW3 Tail-, Rear Seat Bag € 42,90 ZXS319 Rain Protection Cover € 8,95

Cooler protection
Perfect protection for your cooler which looks nice, made
of high-quality stainless steel.
The lattice is surrounded by a solid frame and keeps
insects or dirt away from the cooler.
2x cooler protection, scratch protection and fitting instruc-
tions are included.

ArtNo. Description Price

PR5119-S S1000R 2013-2016 € 139,90
PR5119 S1000R 2017-* € 132,00

Crash Protectors Swing-Arm

This SWING-ARM PROTECTOR spool slider ref. DP8 is
made of lathed plastic (POM) and high-quality aluminum.
This protector DP8 for BMW S1000R has a double
function, it protects the swing arm and can also be used
as rear stand holder.
Shipment: 1 set (left and right).

ArtNo. Description Price

DP8 Protectors swing-arm € 42,50

www.mhornig.com 349
S 1000 R

GPS Mounting
You screw the GPS ball into the upper triple clamp. The screw is 55/60/65mm long with a M8 thread. Then you can
mount many different GPS mounts to it, for example RAM-mounts or the mounts we offer in the category „Navigation
and Communication“.
ArtNo. Description Price
NH 1-10 GPS mounting € 24,95

GPS Mounting with Plate

You will tighten the basic screw (thread M8) to your handlebar mounting. Then you will screw the movable GPS moun-
ting plate to it. Garmin and TomTom motorcycle GPS units can be mounted without any problems. However, you can
also adjust the plastic plate very easily for other devices.

ArtNo. Description Price

NH 1-12 GPS mounting with plate € 79,95

350
 Remus HyperCone
The brand new REMUS HyperCone with conical silencer
body is the clear further development of the market-
proofed REMUS HexaCone and marks the upper end of
the REMUS motorcycle high-performance silencers.
The innovative highlights of the REMUS HyperCone are
the carbon outlet cap in combination with a titanium
or stainless steel sleeve, the hexagonal design of the
outlet cap and the conical silencer body, guaranteeing
maximum ground clearance whilst cornering.
The REMUS HyperCone is EC-approved and offers in
addition to the well-known sonorous REMUS sound a
performance and torque increase and convinces with a
weight of just 1,5 kg in the titanium version.
Not for Euro 4!

ArtNo. Description Price

096602 087009 slip on, stainless steel € 534,00
096802 087009 slip on, titanium € 663,00

How do you sit on your motorcycle seat? Do you want to change something in your seat?
Then read through the pages of the catalog SEAT ALTERATION.
We will change your seat exactly like you want it to be.

You need a tank bag, rear seat bag, duffel bag,

inside bag, universal bag or tool bag?
You can find it under SOFT BAGS in the catalog
and online: www.mhornig.com

www.mhornig.com 351
S 1000 XR

S1000XR
built since 2015 -
999 ccm cylinder capacity
power: 160 HP
max. torque 112 Nm at 9.250rpm

352
GPS Mounting
Easy and fast mounting is possible with our new GPS mounting for BMW S1000XR. The windscreen can still be used
in all positions and you always see your GPS without looking away from the street. For Garmin SPIII, SP26**, 2720,
Zumo 550, Zumo 660, Nüvi and all BMW Navigators. GPS SP26** & 2720 owners will need to purchase the Garmin
motorcycle mount.
ArtNo. Description Price
44013 GPS mounting € 89,90
Zumo-Ad Adapter made for all Garmin SPIII, SP26**, 2720 & Zumo (not for ZUMO 340, € 11,60
345, 350, 390 and 395). GPS comes 12mm closer to you and it can be moved
7,5mm or 15mm upwards or downwards.
tomt-Ad Ed 2 Adapter for TomTom 2nd Edition/Urban Rider Pro/TomTom 2013 LM, TomTom 400, € 15,90
410, 420, 450, 500 & 550, Incl. screws for mounting in the GPS mount and the
TomTom holder.
ram-1zoll Adapter for 1” RAM-ball € 34,90
Stainless steel end weight
These end weights are made of stainless steel and create
a noble look for your bike. Included are two stainless steel
end weights.
Stainless steel:178 grams each
Original aluminium: 65 grams each

ArtNo. Description Price

0808 Stainless steel end weights € 34,40

Wolo Very Loud Horn

This horn ensures with its 115 db that you get the neces-
sary respect and that you will not be overlooked.
The horn is perfect for motorcycles, because it is small
and easy to install. Because of its E-approval mark it is
street legal in the EU.
Horn: 12V 6A (non-stop operation), height 7,5cm;
diameter 8,5cm.

ArtNo. Description Price

TM80BMW Wolo Very Loud horn € 79,90
and wiring

www.mhornig.com 353
S 1000 XR
Rim Stripes
Rim stripes with the writing S1000XR. - pre-curved 7 mm
wide segments - for 17 inch front wheel and 17 inch rear
wheel - high-quality automotive foil - available in different
colours (other colours are also possible!)
Shipment: 16 segments (4 segments for one side of one
wheel) + installation instruction

ArtNo. Description Price

s1xr-rot17-17 red € 29,90
s1xr-weiss17-17 white € 29,90

Reflection Foil TOURING CASE

This set of reflection foils (4 pieces) increases the signal-
ling effect for the following traffic a lot. Your motorcycle is
immediately much more visible which increases also your
passive safety a lot. The black foils look unremarkably
black during daylight, but also reflect in a striking silver/
white colour at night.
ArtNo. Description Price
ReflR12RLC-S1XR Reflection foil € 19,90
ReflSchwR12RLC-S1XR Reflection foil € 22,90
black

Side stand foot enlargement

Feel safer parking your bike on dirt or asphalt with a side
stand foot enlargement. More than 100% larger contact
area. Made of high-quality aluminium.
Silver anodized. Easy to install.
Doesn‘t fit for the lowered version of the S1000XR!

ArtNo. Description Price

0727 Side stand foot enlargement € 33,80

354
 Engine Crash Protectors
These engine crash protectors for the left and right side
provide extra protection for your motorcycle. The pads
are made of milled state-of-the-art aluminium which is
high-strength.
Shipping includes crash protectors for the left and right
side plus mounting.

ArtNo. Description Price

SCBM01 Engine crash protectors € 179,00

Mirror Extensions
Our mirror extensions are the perfect solution if you
mainly see your shoulders in the mirrors.
The mirrors will be moved a few centimetres outwards in
order to improve the view to the rear.

ArtNo. Description Price

BK02LC 1 set mirror extensions € 49,95

Swing arm pivot covers

These aluminium parts cover the big holes above the
footpegs of your BMW and make sure that no dirt or dust
can stay in it. However, water can still escape.
Shipment contains a set (2 pieces for left and right side).

ArtNo. Description Price

0291 Black anodized € 29,90

Handlebar Risers
Raising the handlebar by 15 or 25mm results in a more
upright, much more relaxed seating position. The adjust-
ment range of the handlebar angle is increased, which
further increases rider comfort.
Easy to fit in minutes. No need for long cables or brake
cables! With EU street homologation!

ArtNo. Description Price

045-5255 15mm € 52,90
045-5256 25mm € 59,90

www.mhornig.com 355
S 1000 XR
Oil Filler Plug
This oil filler plug is made of high-quality aluminium
and available in two colours: black anodized or silver
anodized. You can open this oil filler plug
with a Torx T45.

ArtNo. Description Price

0025 black anodized € 20,50
0024 silver anodized € 20,60

Centre cap top yoke

This part is an optical improvement for your bar risers as
it is made of aluminium, furnished with an emblem.
An integrated o-ring ensures a snug fit.

ArtNo. Description Price

0269 Silver anodized € 25,80

Synto brake- and clutch lever

Synto is the name of the 6x adjustable CNC high-
precision brake and clutch made of aluminium.
Combines elegance and functionality. Handling pure!
* 6 x adjustable CNC high-precision levers
* Racing proven Extremely light weight / 60g per lever
* CNC-milled from high tech aeronautical norm
aluminium EN 2017
* Perfect design – convincing finish
* Brilliant control feeling * Aerodynamic louver
* Levers ca. 1 cm shorter than original
* Predetermined breaking point at long version
* Adjuster colour is always black, only the black lever has
a silver adjuster * For brake and clutch
* Including street homologation TÜV part certificate (ABE)
There is a video for this product online: www.mhornig.com

ArtNo. Description Price

BH40-KH54-15-11-L black-silver € 198,00
BH40-KH54-17-15-L red-black € 198,00
BH40-KH54-14-15-L blue-black € 198,00

356
 LED Fairing Turning Signals
You simple glue these LED fairing turning signals into the
turning signal space in front of the S1000R‘s fairing with
a 3M foil. The indicators have an E-mark and are road
legal. Shipment: 2x LED fairing turning signals, 2x 3M foil.

ArtNo. Description Price

1580 Grey LED fairing turning € 64,90
signals
1581 Clear LED fairing € 64,80
turning signals

Extenda Fender
The rear section of the front fender is not long enough
to effectively keep road debris off the exhaust and off
the front of the engine. The fender extender solves this
problem effectively and elegantly. Made of tough ABS
plastic the extender attaches to the original fender with
expanding rivets which are of course included.

ArtNo. Description Price

054220 Extenda Fender € 30,90

Air deflector
These smoked acrylic extensions will be mounted behind
the original hand protectors. They provide perfect pro-
tection from wind and rain. They are compatible with the
original windshield.
Shipment: 1 set (1x left and 1x right).

ArtNo. Description Price

EH5108 Air deflector € 89,00

Cooler protection
Perfect protection for your cooler which looks nice, made
of high-quality stainless steel.
The lattice is surrounded by a solid frame and keeps
insects or dirt away from the cooler.
2x cooler protection, scratch protection and fitting instruc-
tions are included.

ArtNo. Description Price

PR5119 Cooler protection € 132,00

www.mhornig.com 357
S 1000 XR

Vario Touring Screen

This type of touring screen has a small spoiler at the top
of the wind deflector. This spoiler can manually be set to
seven positions in terms of angle and height. Tiresome
turbulence is also reduced by the air flow at the rear of
the spoiler. Length: 390mm.

ArtNo. Description Price

4025066154272 Smoke grey € 145,90
4025066154265 Clear € 145,90

Touring Screen
The touring shield has the same shape as the original
screen, but with an additional raised wind deflector about
5-7 cm high at the top, covering the entire width. This
deflects the wind over the rider and allows a relaxed ride,
particularly on longer trips. Length: 370mm.

ArtNo. Description Price

4025066154319 Smoke grey € 102,90
4025066154302 Clear € 102,90
4025066154326 Black € 102,90

Touring windshield
For long distance rides PUIG introduces the Touring series
to minimize the windblast against the rider. These screens
raise the windblast for several centimeters, allowing the
rider to keep a more comfortable position riding the
motorcycle.
10.5 cm higher than the original windscreen
520x425mm (Height x Width)

ArtNo. Description Price

7619W Clear € 89,50
7619H Smoke grey € 89,50

358
 AC Schnitzer STEALTH Exhaust
The brand new AC Schnitzer STEALTH exhaust with conical
silencer body is the clear further development of the
market-proofed REMUS HexaCone and marks the upper
end of the motorcycle high-performance silencers.
The innovative highlights of the AC Schnitzer STEALTH
exhaust are the carbon outlet cap in combination with a
matt black sleeve, the hexagonal design of the outlet cap
and the conical silencer body, guaranteeing maximum
ground clearance whilst cornering.
The AC Schnitzer STEALTH exhaust is EC-approved and
offers in addition to the well-known sonorous AC Schnitzer
sound a performance and torque increase.
ArtNo. Description Price
S4782 087117 Exhaust 2017-, € 935,00
for Euro 4!

Brake Pedal Enlargement

It is nicely machined of aluminum and natural anodized.
The surface is slotted inorder to avoide slipping. This
enlargement simply slips on and is held in place with two
set-screws. Length: circa 6,2cm, Width: circa 2,4cm

ArtNo. Description Price

0102 Brake Pedal € 33,85
Enlargement

How do you sit on your motorcycle seat?

Do you want to change something in your seat?
You must send
Then read through the pages of the catalog your seat
SEAT ALTERATION. to us!
We will change your seat exactly like you want it to be.

www.mhornig.com 359
NAVIGATION & KOMMUNIKATION

360
 ArtNo. Description Price
10036960 TomTom Rider € 399,00
550

TomTom Rider 550

The TomTom Rider 550 GPS sat nav gives you complete control over your journey with personalised navigation, tailor-
made for motorbike riders. You can choose not only where to go, but also how to get there. Take the most exciting route,
or the fastest, or plan your own tour and share it with your friends.

- Road maps for 152 countrys of the world** including Lifetime Maps*: Free lifelong map updates mean that all your
maps, addresses and points of interest are always up to date*
- Planning exciting routes: You decide how much excitement your tour is going to offer. The Exciting Tour planning
function enables you to choose how winding the road your route will be.
- Plan, search, create, edit and share your routes: Use your preferred tour planning program on your computer, and
then synchronise this data with your TomTom Rider. Share your route with other riders before you set off, while you‘re on
the road, or after you get back home.
- Route recording: Save your tip and repeat the adventure afresh whenever you like. Record your journey from beginning
to end, including spontaneous detours or short-cuts, and share it all with fellow bikers. Your most recent trips are
automatically saved on your TomTom, so you can relive the whole adventure all over again any time.
- Fast search: Find your destination faster with the intuitive search function. The fast search starts as soon as you start
to type
Country coverage:
Maps for 152 countrys of the world (further details at www.tomtom.com)
Specs:
Dimensions (W x H x D) approx. 136.8 x 88.40 x 30.50mm; Screen: WQVGA TFT colour display (resolution: 480 x 272)
with 4.3 inch (10.9cm) diagonal; Power supply: integrated lithium-ion rechargeable battery; Run time: up to 6 hours;
Weight: approx. 280 g; Compatible with Windows® XP or later version & Mac OS X 10.5.8; Tyre route planning software
is only compatible with Windows XP or later
Comprises:
TomTom Rider 550; RAM Universal Mount for 22 mm and 25.4 mm (imperial) handlebar tubes, Active Bike Dock
mount and 12V battery cable; USB cable; access to road maps for 152 countries of the world**; Quick-start guide

*Receive TomTom Traffic, Speed Cameras (not available in all countries) and download 4 or more full updates of your
pre-installed map every year, for the life of your product. You need a PC with an Internet connection and a MyTomTom
account to download map updates. For more information, visit tomtom.com/lifetime. Smartphone Connected: Get
TomTom Traffic and Speed Cameras via your smartphone with Bluetooth connection. Your smartphone needs to be
compatible and come with a data plan. Extra costs may apply, check tomtom.com/connect for more information.
**Highspeed Internet access necessary

www.mhornig.com 361
NAVIGATION & KOMMUNIKATION

ArtNo. Description Price

zumo595lm Zumo 595LM € 599,00

Nav Garmin Zumo 595LM Europe

Technical data:
- Dimensions (WxHxD): 14.9 x 9.7 x 3.3 cm
- Screen: transreflective WVGA colour display (resolution: 800 x 480) with 5.0 inch (12.7 cm) diagonal
- Power supply: replaceable lithium-ion rechargeable battery
- Run time: up to 4 hours
- Weight: 374.5 g
- Compatible with Windows Vista SP3 or later version and MAC OS 10.7 or later version.

Comprises: Garmin zumo 595 LM, preloaded maps for 45 European countries, incl. nüMaps Lifetime with lifelong free
map update*, motorcycle mount with installation kit and 12V battery cable, USB cable, car mount incl. in-vehicle
charging cable, quick-start guide

Country coverage:
Full coverage of 41 countries:
Andorra, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain,
Greece, Hungary, Iceland, Ireland, Italy, Kosovo, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Monaco,
Montenegro, Netherlands, Norway, Poland, Portugal (including the Azores), Romania, San Marino, Serbia, Slovakia, Slo-
venia, Spain, Sweden, Switzerland, Turkey, Ukraine, Vatican City Partial coverage of main traffic routes in the following 4
countries: Albania, Belarus, Bosnia-Herzegovina, Moldavia

Voice instructions in the following languages: Danish, Dutch, English (UK), Flemish, Finnish, French, German, Greek,
Italian, Luxembourgian, Norwegian, Portuguese, Spanish, Swedish, Bulgarian, Croatian, Czech, Estonian, Hungarian,
Lithuanian, Polish, Romanian, Serbian, Slovak, Slovenian, Turkish

Please note:
- You should always keep the software (firmware) of your motorcycle navigator up to date. That way, you benefit from
upgrades and get the most out of your unit.
- If your Garmin GPS sat nav no longer has sufficient memory to load a map update, you must either (a) reduce the
amount of map data for the updates or (b) purchase a microSD or SD memory card (depending on the Garmin model)
in order to store some or all of the map data for the update. The microSD or SD memory card can be inserted in the
microSD/SD slot on your Garmin GPS sat nav.

*With lifelong map updates, you receive map updates for a compatible Garmin product until the end of its useful life
or for as long as Garmin receives map data from its supplier (whichever occurs first, but 30 years at most), as soon as
these updates are made available by Garmin. This entitlement is not transferable to another Garmin device. Additional
memory may be required for future map updates (needs to be purchased separately). Please observe the full terms
and conditions of use, which are available at www.garmin.com/details
**The required free Garmin Smartphone Link app is compatible with Android and iOS smartphones. Charges may be
payable, depending on your mobile data tariff. Selected services require a subscription.

362
 Extra GPS Mount
You can exactly place your GPS in the position you want it
to be with these extra GPS mounts.
The RAM ball plate can be screwed to the X-Navi, Zumo
340, Zumo 350, Zumo 390, Zumo 550, Zumo 590 and
Zumo 660 or TomTom 1, TomTom 2, TomTom Rider and
TomTom 2013. Then you connect the RAM ball plate with
one of the clamps (60 or 90 mm length). If you want to
mount your GPS in combination with one of the following
GPS mounts for the handlebar, you need the RAM-ball
plate and one of the clamps (GPS mounts article no.: NH
1/5; NH 1/3 sw 22; NH 2/1 sw 22; NH 3/1; NH 1/3 c
24; NH 1/3 c 28; NH 3/2; NH 1/6; NH 3/1 15mm).

ArtNo. Description Price

NHZ1 RAM-ball plate € 19,95
NHZ4-60 Clamp 60mm € 26,20
NHZ4-90 Clamp 90mm € 28,60
NHZS Lock for clamp € 48,80

Clamps

RAM-ball plate Lock for clamp

GPS or Cam Mounting

RAM-ball and mounting are CNC-machined for TomTom
and Garmin Zumo GPS devices. You can mount all RAM-
mounts on the RAM-ball.
If you want to install our GPS and cam mounting like you
can see it on the other pictures, you just need a longer (Example R1100S)
screw. The hole in our mounting is 10,5mm large.

ArtNo. Description Price

NH 1/8 GPS or cam mounting € 29,95

www.mhornig.com 363
NAVIGATION & KOMMUNIKATION

ArtNo. Description Price

IN-INTERPHOSPORTTP Interphone Sport € 369,00
Twin Pack

Interphone Sport Twin Pack

Supplied in a Twin Pack, Interphone Sport is the intercom for people who love to stay connected. Thanks to Bluetooth®
connectivity with your smartphone, you can listen to music with hi-fi sound quality and receive instructions from your
navigator. And, you can share music with a passenger and listen to your favourite radio stations.

Combining technology and connectivity, Interphone Sport is the ideal travelling companion for people who love to have
fun sharing the excitement of a motorcycle trip with friends.

It‘s equipped with advanced functions that enable it to connect to any Bluetooth® intercom on the market. It can be
activated by voice command (VOX) and automatically reconnects if the connection with the other motorcycles is lost.
With Interphone Sport, receiving and placing those never-ending calls will no longer be a problem, thanks to its great
battery life.

General Features:
- Talk time: up to 15 hours
- Standby: 1000 hours
- New 80MHz digital signal processor (DSP) to
improve the audio experience
- Direct function buttons (Quick Touch)
- User-friendly interface

Intercom Range:
- Up to 1 km in full duplex

GPS:
- Compatible with most major Bluetooth® navigation devices for motorcycles
- GPS voice instructions
- Compatible with most major smartphone navigation Apps

Pack Content:
Control unit rapid release system, Double installation bracket for helmet (clip and adhesive), Internal audio unit with
ultra-thin earpieces, Boom microphone (jet and modular helmets) and adhesive pad microphone (full face helmets),
Micro USB data and charging cable

364
ZUBEHÖR - ACCESSORIES
Bavaria Outdoor Cover
Effective and inexpensive. Light motorcycle cover made
of special-coated foil. Frost-resistant up to -30 degrees,
UV-stabilized, water-resistant and with grommets to
fasten the cover.
Size: Length=2,30m, height front=1,50m, height
rear=0,85m, width=0,60m.

ArtNo. Description Price

100 40 303 Outdoor cover € 52,90

Indoor Cover
The outer material has a silky quality and the inside is
very soft and gentle on the paintwork. Keep your motorcy-
cle looking brand new.
This cover is made of the best quality cloth to ensure that
your bike stays clean and dry inside your garage.
„Breathing“ membrane material, moisture is „transported“
to the outside, tightening band, length=2,30m, height
front=1,50m, height rear=0,85m, width=0,60m.

ArtNo. Description Price

100 40 322 Indoor Cover € 99,90

Top Case Outdoor Cover

- High-quality cover for motorcycles with top case and
side cases - Maximum protection against rain, dust, frost
and UV - Air vents to avoid condensation - Soft cotton
lining protects against scratches - Heat-resistant lining
(up to 300 °C) at exhaust positions
XL: Length 246cm, Width 104cm, Height 127cm
XXL: Length 264cm, Width 105cm, Height 130cm
(primarily for K1600GTL and K1600B!)

ArtNo. Description Price

73160612 XL € 99,90
73160613 XXL € 106,90

Autosol Bluing Remover

Removes blue and brown staining from stainless steel ex-
haust systems. Your exhaust will look brilliant again after
you used it. Contents: 150 ml, packaging: bottle.
Ingredients: AQUA, ALUMINA, HYDROCHLORIC ACID, Fatty
alcohol ethoxylates, OLEIC ACID, Ethinylcarbinolalkoxylate,
XANTHAN GUM, COCAMIDOPROPYL BETAINE

ArtNo. Description Price

D01290 Autosol Bluing Remover € 15,45

366
 Garage Trolley
This stable trolley for your centre stand makes moving the
motorcycle very easy. We only use high-quality wheels
made in Germany! It is suitable for very wide centre
stands. Of course, our garage trolley is electrolytically
galvanised and has a rubber cover for the centre stand.
ArtNo. Description Price
2012N 320 kg € 129,90
2015 400 kg € 139,90

Side stand foot enlargement

Feel safer when parking your bike on dirt or asphalt with a
side stand enlargement! Made of aluminium.
Size: 12cm x 12cm.

ArtNo. Description Price

0050 Side stand foot enlargement € 6,50

Throttle Rocker
Our throttle rocker is a device that easily wraps around
the throttle grip of any motorcycle. It protrudes away from
the grip so that the contoured portion fits comfortably
against the heel and palm of the hand. Using the heel of
his hand, the rider applies minimal downward pressure
onto the throttle rocker, making the throttle rotate. Additi-
onally, the throttle rocker works as a resting place for the
hand, reducing fatigue on long trips.
ArtNo. Description Price
80055 Throttle Rocker € 10,90

Loctite
Thread locking compounds are used throughout industry,
especially in automotive applications, to provide an
inexpensive and reliable way of ensuring that fasteners
do not come loose. They are highly specialised liquid
compounds that cure quickly to form a bond between the
surfaces they join.
ArtNo. Description Price
L.10004020 5ml Loctite € 8,90

Battery Pole Fat

For battery poles and electrical contacts, protects against
corrosion. Volume: 50g.

ArtNo. Description Price

10004881 50g battery pole fat € 3,99

www.mhornig.com 367
ZUBEHÖR - ACCESSORIES
Cupper paste
High-performance copper paste, 100g.
Resistant -30C to +1300C. Cold, heat and sea water
resistant. An absolute must when you install new brake
pads.

ArtNo. Description Price

L.10004267 100g cupper paste € 5,95

Anti Squeak Paste

The anti squeal paste can be used for the whole brake
system (bolts, pins, ...). It will avoid squeaking and does
not contain any copper, so it can also be used safely with
ABS brake systems.

ArtNo. Description Price

L.10004882 35g Anti squeak paste € 3,99

Metal Polish
Aluminium, stainless steel and
chrome polish.

ArtNo. Description Price

L.10004015 75ml metal polish € 5,40

Plastic polish
Plastic polish 50g.

ArtNo. Description Price

L.10004318 50g Plastic polish € 12,50

Brake fluid
High-performance brake fluid for street and
off-road, DOT 5.1, made by Lucas.

ArtNo. Description Price

S.PFB 550 0,5 litre brake fluid € 9,90

368
 Gel Special Cleaner
Procycle gel special cleaner for motorcycles.

ArtNo. Description Price

L.10004909 1 litre gel cleaner € 10,45
L.10004947 5 litres gel cleaner € 24,90

Foam Cleaner
Bike foam cleaner. For the fast cleaning.
Without using water. Simply spray up and wipe off. Seals
the lacquer. Also suitable for helmets and carbon parts.

ArtNo. Description Price

903-004 1 can foam cleaner € 9,95

Insect Remover
An improved active formula easily removes dead insects.
Spray the affected surfaces and allow to take effect for
several minutes. Then, using a sponge and plenty of
water, rinse off dissolved insects and dirt. Silicone-free
and AOX-free.
ArtNo. Description Price
0893470 500ml insect remover € 11,90

Tyre fix
No need to change the tyre after you have holed it. Usea-
ble for all tyre types. Allows you to ride to the next petrol
station or repair shop.
ArtNo. Description Price
L.10004304 400ml tyre fix € 7,95

Chain Clean / Chain Spray

Chain cleaner 500ml. Is ideal for cleaning all types of
drive chains of motorcycles, karts, bicycles or industrial
chains. The chain is thoroughly cleaned and dries quickly
to leave the chain ready for lube.
Chain spray 400ml. Cleans all types of motorcycle chains
(road and offroad) and those of other vehicles (bicycle,
mopped, go kart, ATV). Removes all encrusted deposits:
dust, sand, soil, oil. Its chlorine-free extreme grease
removal formula is perfectly suited to O-ring, X-ring, Z-ring
chains.
ArtNo. Description Price
38904 500ml chain clean € 9,40
38804 400ml chain spray € 9,90

www.mhornig.com 369
ZUBEHÖR - ACCESSORIES

Engine oil
These mineral or synthetic AGIP/ENI engine oils of the latest generation meet the requirements of BMW‘s specifica-
tions or classifications and because of this they fit perfectly to the superior BMW riders.

SAE 15W-50 is standard for: SAE 10W-40 is standard for

BMW R1200GS BMW G650X *
BMW R1200R BMW F650* BMW F800*
BMW R1200RT BMW R1100* BMW R1150*
BMW R1200S BMW R1200C BMW R1200CL
BMW R1200ST BMW K1200* BMW K1300*
ArtNo. Description Price
21611 TEC 4T engine oil SAE 15W-50 1 Litre € 16,50
27112 City TEC 4T engine oil SAE 10W-40 1 Litre € 12,95
28912 CITY HI TEC 4T engine oil SAE 5W-40 1 Litre € 16,80
29411 Racing 4T engine oil SAE 20W-50 1 Litre € 19,40

Transmission oil
The AGIP/ENI transmission oils are extreme pressure
gear oils recommended for hypoid gears operating under
severe conditions and for very highly-loaded gears in
general, especially those subject to dynamic loads. These
AGIP transmission oils meet the requirements of BMW’s
specifications.

We recommend: SAE 75W-140

ArtNo. Description Price

10038325 SAE 75W-140 1 Litre € 19,95
31012 SAE 85W-90 GL5 1 Litre € 14,95
30611 Synthetic SAE 75W-90 1 Litre € 19,40

370
 CLS Chain Oiler
The CLS EVO Tour set includes everything you need to
mount it to your BMW motorcycle. The system contains a
control unit, a proportioning pump with holder, a 100ml
tank and all necessary hardware for installation. Of
course an installation instruction is included which makes
the installation pretty easy.
This high-quality chain oiler includes a 5 year guarantee.

ArtNo. Description Price

127.00601 CLS chain cleaner BMW € 329,00
127.00800 CLS chain cleaner € 399,00
S1000RR

Chain Kits
In order to really transfer the power of your bike onto the road, the chain kit of Regina is the best choice.

The chain and sprockets kit for your BMW F650, ST MY

93-00 consists of an open chain with 110 chain links
and a transmission of 16/47.
The chain and sprockets kit for your BMW F650GS, Dakar
MY 99-07 & G650GS consists of an open chain with 112
chain links and a transmission of 16/47.
The chain and sprockets kit for your BMW F800GS
consists of an open chain with 116 chain links and a
transmission of 16/42.
The chain and sprockets kit for your BMW F650GS 08-*
consists of an open chain with 116 chain links and a
transmission of 17/41. ArtNo. Description Price
The chain and sprockets kit for your BMW F800R consists 410 K F650, GS, ST MY 93-00 € 114,95
of an open chain with 116 chain links and a transmission
416 K F650GS, Dakar MY 99-07 & € 119,90
of 20/47.
G650GS
The chain and sprockets kit for your BMW G650X Country
MY 07-* consists of an open chain with 112 chain links 301 K F650GS 2008-* € 179,90
and a transmission of 16/47. This bevel is made of 302 K F800GS € 179,95
aluminium for a better weight!
The chain and sprockets kit for your BMW G650X Chal- 219 K F800R € 189,95
lenge MY 07-* consists of an open chain with 112 chain 333 K G650X Country MY 07-* € 139,95
links and a transmission of 15/47. This bevel is made of
334 K G650X Challenge MY 07-* € 139,95
aluminium for a better weight!
The chain and sprockets kit for your BMW G650X Moto 335 K G650X Moto MY 07-* € 129,90
MY 07-* consists of an open chain with 112 chain links 4991 Tool for closing a chain € 59,95
and a transmission of 16/47.

www.mhornig.com 371
ZUBEHÖR - ACCESSORIES

Magnetic Sump Plug / Copper Washer

Finest metallic abrasion is safely retained and thus removed from the oil circuit.
Order a copper washer at the same time.
ArtNo. Description Price
1854012 Magnetic screw plug all R 850/1100/1150/1200 € 5,95
1854013 Copper washer for magnetic sump plug for BMW R & K bikes (for M16) € 0,60
1854010 Magnetic screw plug K 1100/1200 RS/GT (-05) & LT € 5,95
1854011 Copper washer for magnetic screw plug for BMW K bikes (for M18) € 0,55
1854014 Copper washer for rear drive screw plug (for M14) € 0,55

Blind Angle Mirror

Just a little piece, but much more security. The blind angle
mirror allows you to see into the blind angle.
32mm diameter, can be glued onto every mirror.
Price per item.

ArtNo. Description Price

28060 Blind angle mirror € 4,90

Quick Connect
For the fuel pipe, each part of the quick connecter seals
individually and avoids leaking petrol. Fits all fuel pipes
and 8mm tubes. Resistant to acid, oil and petrol.
You need, e.g. for a R1100S and R1100R, 2 pieces.
Not for R1150GS Adventure.
Price for one quick connector. Hose clips can be ordered
separately (part no. 1176918 / 1460928).

ArtNo. Description Price

13-31119 Quick connect € 20,90

Quick Connect brass

TA quick-release coupling comprises a male and a female
coupler plus two stainless-steel clamps W4.

ArtNo. Description Price

13-31120 Quick Connect brass and € 39,90
hose clips

372
Round head screws Screw & Captive Washer
Round head screws with hexagon socket. Rust-resistant screws.

ArtNo. Description Price ArtNo. Description Price

60010 S/S M6 x 12 € 0,42 60075 M6 x 12 € 0,50
60050 S/S M5 x 10 € 0,39 60077 M6 x 25 € 0,62
60055 S/S M5 x 12 € 0,41 60080 M5 x 12 € 0,47
60060 S/S M5 x 16 € 0,49 60082 M5 x 16 € 0,57
60065 S/S M5 x 20 € 0,52 60084 M5 x 20 € 0,60
60067 S/S M5 x 30 € 0,60 0421005 Transp. shim Ø 5,3mm € 0,17
60070 S/S M5 x 50 € 0,70 0421006 Transp. shim Ø 6,4mm € 0,15
0421005 Transp. shim Ø 5,3mm € 0,17
0421006 Transp. shim Ø 6,4mm € 0,15

AIV Blade Fuse-Holder 2,5 smm

This fuse holder includes a 20A flat fuse and can be
added to a plus-cable of an electric device, for example
additional lights, GPS units or horns. You can use fuses
from 1A - 30A.
Nominal voltage: 6 - 32 V, incl. cable 2,5mm², protecting
cap and spread water protection.

ArtNo. Description Price

852863 AIV blade fuse holder € 3,90
2,5 smm

90 Degree Valve Stem Adapter

This is the solution to getting at those hard to reach valve
stems. Just screw it onto the valve stem and any air hose
will fit easily. Note: This piece is designed for convenience
use only. It will simplify checking and changing the tire
air pressure.
NOTE: Do not operate your vehicle with this piece instal-
led as doing so may cause valve stem failure. This failure
may cause loss of control of the vehicle.
ArtNo. Description Price
95-36292 90 degree valve stem adapter € 9,60

www.mhornig.com 373
ZUBEHÖR - ACCESSORIES
Loop Antenna
The loop antenna of the electronic immobilizer may fail.
As a result the motor does not get the necessary signal
to trigger a start operation. The loop antenna should be
included in the baggage of every BMW driver. Very easy
to assemble:
1. Deduct the cable plug from the old antenna.
2. Connect the new antenna.
3. Hold the spare key to the ring antenna.
4. Start with original key.
Fit for all models with CAN-bus.
ArtNo. Description Price
7705247 Loop antenna € 39,90

Signal vest
EN 471, Size: universal.
Colour: bright yellow.
Material: 100% polyester.

ArtNo. Description Price

L.10001035 Signal vest € 3,45

First aid kit

First aid kit (very small, only 15x12x4cm) especially
made for motorcycles. Highly visible red bag with three
sided zip. The contents are packaged waterproof!

ArtNo. Description Price

L.10002120 First aid kit € 11,20

Bulb box
1 headlight bulb H 4/12 V, 1 lamp for number plate bulb
5 Watt, 1 turn signal bulb 21 Watt, 1 brake light bulb
21/5 Watt, 1 capless for number plate light, 1 parking
light bulb 4 Watt, 1 warning light and instrument bulb 5
Watt!

ArtNo. Description Price

L.10031110 Bulb box € 10,95

374
 LED Pocket Lamp
The perfect pocket lamp for adventures: 34g light, can
be charged with the cigarette lighter, very long power-on
time. This LED pocket lamp is made of black anodized
aluminium and it can be stored very easily under your
seat or at other places on your motorcycle.
You can use our adapter cable (article no. 10003690) as
a cigarette lighter adapter.

ArtNo. Description Price

MT7LC LED pocket lamp € 22,90

Heated Grips
Heated grip rubbers. Easy to assemble. Suitable for all
bikes. Anti-slip rubber coating.

ArtNo. Description Price

7060940 1 set heated grips € 69,90
(for left & right)

Battery Guard
Battery monitoring with the smartphone - with the intAct
Battery-Guard you always keep an eye on your battery.
After the easy installation to the battery by ring eyelets
and after downloading of the Android or Apple app, the
current voltage value can be retrieved. The transmitter
is suitable for 6 V, 12 V and 24 V batteries. The range is
about 6 meters. By using the app, the voltage of up to 5
batteries can be monitored, obviously an intAct Battery-
Guard has to be installed at each battery.
ArtNo. Description Price
BatteryGu Battery Guard € 29,90

Disc Lock Small

More security for your motorcycle. Drop-forged steel with
a 7mm angled pin. Quickly and easily attaches to the
brake disc. Two keys included.

ArtNo. Description Price

rk5667 Disc lock € 29,90

www.mhornig.com 375
 ZUBEHÖR - ACCESSORIES
Plug, Power socket, Adapter cable
Art. 90026 & Art. BA12 Plug
Fits into the original BMW socket or into ISO-plugboxes,
like article no. 90025. Useful for connecting extra items
Art. 90026
Art. BA12 like navigation systems.
Plug without cable (+ pin middle).

Art. 10003690 Adapter cable

Fits our 12V socket (article no. 90025).
Enables a connection between the socket and products
with cigarette lighter plug.
For all 12 volt items with cigarette lighter plugs, like hand
lamps, mobile phone battery chargers, GPS-systems etc.
Total length ca. 20cm.
Art. 10003690
Art. 90025 Extra power socket
Power socket with cover and mounting bracket, 50 cm
line and fuse. This accessory plug kit allows you to plug
in any BMW accessory. This is the DIN or BMW standard
plug. It is smaller than the SAE or cigarette lighter style
plugs. It is also standard on Volkswagen buses and
vanagons up to 1984.
Art. 90025
Our plug (article no. 90026) fits here.
Adapter cable for cigarette lighter plug:
Article no. 10003690.

Art. 61-44200 Cigarette Lighter Socket Kit

This kit features a standard 12 volt socket and allows you
to plug in standard (cigarette lighter style) devices. The
length of the wire is 130cm.

Art. 61-44201 Mounting for 22-28mm handlebar

ArtNo. Description Price

90026 Plug € 5,00
Art. 61-44200
BA12 Angle plug € 7,75
10003690 Adapter cable € 13,50
90025 Power socket € 15,95
61-44200 Cigarette lighter socket kit € 18,95
61-44201 Mounting for 22-28mm € 9,90
Art. 61-44201 handlebar

Attention!! You can find more accessories here:

www.mhornig.com

376
 Battery Charger Optimate 4 Dual
Without a plug, but with a cable and clips which you can
connect directly to your battery in order to charge it
without disconnecting.
Especially for bikes 2008 - * (article no. 208-037-1).

Note: All new bikes with Can-Bus like K1200S, R & GT,
R1200GS, RT, ST, S & R, F800S & ST and many more.
Turn the ignition on. That will enable the Can-Bus system
to initialise charging.

Battery Charger Optimate 4 Dual for CanBus

The ultimate all-in-one tool for 12V battery care at home,
now with DUAL PROGRAM that automatically diagnoses, Art. 208-03-71
recovers, charges, tests and optimally maintains. Charge
the battery directly or select the program to charge via
the 12V port of your Can Bus equipped bike.
Our article number 90013 is already equipped with a
plug for your BMW plug box!

ArtNo. Description Price

208-037-1 Battery Charger Optimate 4 Dual without plug € 78,90
You can directly connect it to the battery. Place the connector for the charger
under the seat. Then comfortably connect the charger.
90013 Battery Charger Optimate 4 Dual for CanBus with plug for BMW plug box € 79,90
208-03-72 Extra cable for motorcycle plug box (spare part) € 18,50
208-03-71 Eye cable (spare part) € 9,95

Grip Puppies
These Grip Puppies will give more comfort to your ride
and will reduce vibrations. They simply slip over your stan-
dard rubber grip (no need to remove standard grip).
Grip Puppies will fit all standard grip sizes.
The standard Grip Puppy will fit standard bars sizes and
grips. They are 5“ (12.7cm) long and will fit grips that are
1.25 (3.17cm) to 1.45 (3.68cm) inches in diameter. Grip
Puppies can be trimmed with a craft knife or similar if
needed (using appropriate care!).
They are great for adding a little extra thickness and
comfort to your grips.
They will also work with heated grips.

INSTALLATION INSTRUCTIONS: You do not need an air

compressor. Just apply a little soapy water to the inside
of the Grip Puppies and slide them over your existing
ArtNo. Description Price
grips. Allow to dry, then enjoy the ride! In the video on our
website we show how you can use an air compressor. gripp-puppies Grip Puppies € 20,90

www.mhornig.com 377
ZUBEHÖR - ACCESSORIES
Spark Plug Connector / Coil Puller
The spark plug connector of the new generation bikes
makes it easy and secure to remove the spark plug
connector. The connector is actually the coil as well. This
tool makes it easy to remove the spark plug connector /
high tension coil.

ArtNo. Description Price

7673248 Spark Plug Connector / € 6,90
Coil Puller
2306064 Spark Plug Connector € 5,95
Puller

Cable for extra device (GPS) 12V

For BMWs with Can-Bus System.
You can plug in all extra devices like GPS navigation
systems in your cockpit with this cable. Picture 2 in our
online shop shows you which cable is + (plus) and - (mi-
nus). Picture 3 shows you the plug which you can insert
in your cockpit.

ArtNo. Description Price

0413585 Cable for extra device € 23,90

USB Adapter for Motorcycle Socket

Our USB adapter for the motorcycle socket (USB3)
adapts different 12V sockets to the USB standard of 5V
with a maximum of 1000mA. Usual USB adapters only
fit for the big cigarette lighter sockets. This USB-adapter
fits for both: big cigarette lighter sockets and the smaller
motorcycle sockets like BMW uses it (DIN socket, article
no. 90025). Length ca. 90mm.

ArtNo. Description Price

USB3 USB adapter for € 15,50
motorcycle socket

USB Socket Outlet

This USB socket outlet can be mounted onto your handle
bar or frame by means of cable ties or onto any plane
surface by means of double-faced adhesive tape (not
visible e.g. under the fairing or under the seat).
Technical details: input 12V DC, output 5V DC 1000mA
3mA electric power consumption during continuous
operation
Shipping: USB socket outlet, waterproof with cable 1,2m,
2 cable ties, fuse 5A.
ArtNo. Description Price
USB2 USB socket outlet € 19,95

378
 Rubber Grips
Our rubber grips improve the rider‘s feeling and safety.
They reduce vibrations and are made of an outstanding
high-quality material. They are resistant to weathering, UV
and ozone. Sold in pairs.
Length: 125 mm or 4 7/8“.
Diameter 26-26mm or 1.024“-1.024“.
Open-ended grip, compatible with handlebar ends.
With and without heated grips!

ArtNo. Description Price

02624/L Rubber grips € 25,90

Rubber Grips
Sold in pairs.
Length: 130mm or 5 1/8“.
Diameter 22-24mm or 7/8“ - 1“.
Open-ended grip, compatible with handlebar ends.
Attention: Do you have heated grips or not?

ArtNo. Description Price

01690/F Rubber grips € 24,90
01690/F/24 Rubber grips for heated € 25,90
grips

AirMan Sparrow Air Pump

Please note: If your bike has a Can Bus electrical system
(most 2005 models and later BMWs) the inherent design
of your bike’s accessory outlet may not power this pump
when the engine is not running. However, you can also
install one of our accessory outlets which are wired
directly to your battery.
TECHNICAL SPECIFICATIONS: Airflow: 15.0 – 18.0 L/min,
Maximum pressure: 150 psi, Net weight: 600 g, Dimensi-
ons: 12.0 x 6.0 x 14.2 cm, (2-3/8” x 4-3/4” x 5-5/8”)
ArtNo. Description Price
C74-Airman Air Pump € 34,90

Key fob
This nice key ring with the letters BMW is made of soft
synthetic material in order to avoid scratches.
Size: L 75mm, H 32mm, W 14mm.

ArtNo. Description Price

S.415-710 Key fob € 4,95

www.mhornig.com 379
ZUBEHÖR - ACCESSORIES
Twinmax synchroniser machine
A correct and proper synchronisation of the carburettor
or the fuel-injection system is very important for
perfect engine running: smooth engine running, excellent
response, no vibrations, optimal mileage and less wear.
Compared to other synchronic machines the TWINMAX
compares the vacuum on both sides with the help of a
single pressure sensor (differential pressure gage) and
shows the difference on the indicator.
Synchronizing with TWINMAX is easy and quick.
The result is professional precision.

The set contains:

* 1x TWINMAX MKIII, short operating instruction in English
on the instrument,
* 2x petrol strong elastic hoses, each one is 70 cm,
* 2x connecting nipples, 5 mm for Japanese bikes
* 2x connecting nipples, 6 mm for Japanese bikes
* 2x connecting tubes for BMW
* 1x 9volt brand block battery

WEEE register number: DE 76122104

ArtNo. Description Price

Twin-MKIII Twinmax synchroniser € 114,50
machine
Koffer-MKIII Case for synchroniser € 19,90
machine

GS911 wifi Enthusiast Diagnostic Equipment

The ideal diagnostic tool for workshop and travel! The GS-
911 wifi Enthusiast enables performing endless servicing
and diagnostic tasks, deleting the error memories, rea-
ding out important data from the various control devices
and set the service date on many BMW motorcycles. The
testing unit is small and lightweight enough to be taken
on all travels without difficulty and is always at the ready
in case of breakdowns and error messages even without
connection to a 220V mains.
You need only the GS-911, a Windows or Mac PC, or a
mobile phone or tablet PC to get going! The necessary
software can be downloaded free of charge or you can
access it via web browser and the device can be regi-
stered easily via the internet.
ATTENTION: For BMW motorcycle models (model year
2017 and up) with EU4, an adapter cable (article no.
80213) is necessary in order to be able to connect the
diagnostic equipment to the motorcycle!

ArtNo. Description Price

80204 GS911 wifi € 439,90
80213 Adapter cable EU4 € 45,80

380
Carpet
This black carpet with grey R1200GS writing is also named race floor, garage mat, garage rug or floor mat. It protects
your floor from oil and petrol. This garage floor mat can not only be used not only to protect garage floors, but also as
an ideal way to brighten up your home, garage or pit lane.
It is oil and water resistant. The material is nylon. The size is 80x200cm and the carpet has an anti-slip bottom side.
Here we show the R1200GS carpet. Of course, all other names and models are also possible!

ArtNo. Description Price

teppich-R1200GS Carpet € 94,90

www.mhornig.com 381
ZUBEHÖR - ACCESSORIES
You can make a difference by recycling your used motor oil.
Did you know that used oil can be re-refined into base stock for lubricating oil?

If you recycle just two gallons of used oil it can generate enough electricity
to run an average household for almost 24 hours.

Cars and motorcycles are an indispensable fact of life for most of us. So are abundant and clean supplies of
drinking water, too. What we do with the used oil from our cars plays an important role in balancing our desire for
convenient transportation with our desire for a clean and healthy environment today and for future generations.

We are all familiar with recycling newspapers, aluminum cans and glass and plastic bottles, but you may not be
aware of the efforts of the petroleum industry and other groups to promote used motor oil recycling: providing con-
venient collection sites for the purpose of keeping used motor oil out of our waterways and ground water supplies
and getting used oil into the recycling system.

http://www.recycleoil.org/

Battery recycling
Most types of batteries can be recycled. However, some batteries are recycled more readily than others, such as
lead-acid automotive batteries (nearly 90% are recycled) and button cells (because of the value and toxicity of their
chemicals). Other types, such as alkaline and rechargeables can also be recycled.

Battery recycling has a number of important environmental benefits:

- Recovery of non-renewable resources for other beneficial uses

- Reduction in the environmental impacts of mining and manufacturing virgin materials
- Reduction in the environmental impacts of landfill
- Less contamination of recycling programs for organic materials.

E-waste recycling
Recycling raw materials from end-of-life electronics is the most effective solution to the growing e-waste problem.
Most electronic devices contain a variety of materials, including metals that can be recovered for future uses. By
dismantling and providing reuse possibilities, intact natural resources are conserved and air and water pollution
caused by hazardous disposal is avoided. Additionally,
recycling reduces the amount of greenhouse gas
emissions caused by the manufacturing of new products.

382
 Oil filters
(for other motorcycles please ask)
Only the correct oil filter ensures that your oil is free of
particles. This will enable a long life of your engine and
a perfectly smooth running.

Models Art.No. Price

R80/R100 (withour oil cooler), one piece 30010 € 10,50
R80/R100 (without oil cooler) two pieces 30009 € 13,40
R80/R100 (with oil cooler) 30013 € 14,90
F650, F650CS/GS/ST/Dakar 30011 € 6,60
F650GS 2008-* / F700GS / F800GS & Adv. HF 165 € 12,75
F800S/ST/GT & F800R HF 165 € 12,75
G650X models 30011 € 6,60
G650GS & Sertao 30011 € 6,60
K1100RS & LT / K1200LT / K1200RS & GT ( *-2005) 30012 € 11,90
K1200S/R/R Sport/GT (2006-*) 30014 € 12,40
K1300S/R/GT 7721779 € 13,90
K1600GT/GTL & K1600B 30014 € 12,40
R850/1100/1150GS & Adv & R850/1100/1150R & Rockster 30012 € 11,90
R1100/1150RS & R1100/1150RT 30012 € 11,90
R1100S 30012 € 11,90
R850/1200C & R1200CL 30012 € 11,90
R1200RT/ST/S, HP2 Sport 30014 € 12,40
R1200R & RnineT 30014 € 12,40
R1200GS / R1200GS Adv. & HP2 30014 € 12,40
R1200GS & Adv. LC, R1200RT LC 7721779 € 13,90
R1200R LC & R1200RS LC 30014 € 12,40
S1000RR/R/XR 30014 € 12,40

Oil filter spanners

Made of high-quality steel to remove the oil filter as fast and easily as the professionals!
Art. 30050: wrench size 74 mm, for square 1/2 inch. Art. 30051: square 3/8 inch.

Both oil filters with rills as well as oil filters with edges are used. For oil filters with rills you need article no. 30051, for
oil filters with edges you need article no. 30050. Please check which oil filter is installed on your own motorcycle.

Models ArtNo. Price

Oil filter spanner for oil filters with rills 30051 € 19,95
Oil filter spanner for oil filters with edges 30050 € 12,50

www.mhornig.com 383
ZUBEHÖR - ACCESSORIES
Air filters
Choose the correct air filter and give your bike
the necessary air to breathe. It will definitely be worth it!
You can choose between an original air filter
or a K&N duration air filter for more power.

Models Description ArtNo. Price

F 650 -2000 Air filter 40011 € 12,50
F650GS / Dakar (01-07) & G650GS Air filter 050020 € 15,50
F650GS (01-07) & G650GS K&N duration air filter 40022 € 92,90
F650CS / G650X-models Air filter 10050116 € 15,50
F650GS (08-*)/F700GS/F800S/ST/R/GS/GT K&N duration air filter 10050781 € 54,95
K1100RS&LT K&N duration air filter 40026 € 99,95
K1200RS/K1200GT 01-05/K1200LT K&N duration air filter 40027 € 89,95
K1200RS/K1200GT 01-05/K1200LT Air filter 1371916 € 29,90
K1200S (2x) /K1200R/K1200GT 06-* K&N duration air filter 10050779 € 89,95
K1300S (2x),R,GT K&N duration air filter 10050779 € 89,95
K1200S (2x)/K1200R & R-Sport/K1200GT 06-* Air filter 7703583 € 16,80
R850/1100/1150GS, R / R1100/1150RT, RS Air filter 40012 € 16,50
R850/1100/1150GS, R 93-* K&N duration air filter 40023 € 58,90
R1100/1150RT 94-* / R1100/1150RS MY 92-* K&N duration air filter 40023 € 58,90
R850/1200C 98 -* K&N duration air filter 40024 € 66,95
R1100S 99-* (panel air filter) Air filter 7650976 € 16,95
R1100S 99-* and Boxer Cup (panel air filter) K&N duration air filter 40025 € 79,95
R1200GS (04-12) & Adv. (05-13), HP2, R1200RT (05-13), K&N duration air filter 050157 € 74,90
ST, S, R, RnineT
R1200GS (04-12) & Adv. (05-13), HP2, R1200RT (05-13), Air filter 7672552 € 16,60
ST, S, R, RnineT
R1200/1250GS & Adv. LC, R1200/1250RT LC, Air filter 7230313 € 18,50
R1200/1250R LC, R1200/1250RS
R1200/1250GS & Adv. LC, R1200/1250RT LC, K&N duration air filter 7230354 € 79,90
R1200/1250R LC, R1200/1250RS

Recharger Filter Care Service Kit

A six-step maintenance system designed to clean any K&N Filtercharger® air
filter. Restores air flow efficiency so your filter charger performs like new!
Includes: 6.5 oz. spray oil & 12 oz. filter cleaner.

ArtNo. Description Price

04249 Recharger Filter Care Service Kit € 19,70

384
 Front brake pads
Lucas ABE/TÜV brake pads are characterised by high
quality at the best price. All pads are asbestos-free
and free from heavy metals. Very good shelf life, excel-
lent wet braking behaviour.
Price per disc.

Models ArtNo. Price ArtNo. Price

Organic Sintered
F650 93-00, ST, CS, GS, Dakar 20042 € 29,80 20043 € 34,90
F650GS 2008-* / F700/800GS and HP2 20042 € 29,80 20043 € 34,90
F800S, ST, GT/ F800R 06-14 / G650Xmoto, RnineT MCB 683 € 27,90 MCB 683SV € 34,95
G650XChallenge / G650XCountry 20042 € 29,80 20043 € 34,90
K1100RS MY 92-96 / K1100LT My 93 - 99 20031 € 31,90 20033 € 34,90
K1200LT MY 97 - 00 20031 € 31,90 20033 € 34,90
K1200LT with Integral ABS MY 11/00 - 20035 € 31,90 20037 € 39,90
K1200GT MY 01-05 / K1200RS MY 01-05 20034 € 31,90 20036 € 39,70
K1200RS 96 - 00 20031 € 31,90 20033 € 34,90
K1200S / K1300S 20034 € 31,90 20036 € 39,70
K1200R, R Sport / K1300R 20021 € 31,80 20025 € 35,50
R850GS 95-02 / R1100GS 93- 99 20031 € 31,90 20033 € 34,90
R1150GS 99-01 20031 € 31,90 20033 € 34,90
R1150GS 01 -02 / R1150GS Adv. 01-02 20034 € 31,90 20036 € 39,70
R850 94-01 /1100R / R1100RS 92 - 01 20031 € 31,90 20033 € 34,90
R 1150 GS & Adv. MY 03-05 20035 € 31,90 20037 € 39,90
R1150R 01-06 Rockster 03-06, R850R 02-07 20035 € 31,90 20037 € 39,90
R850C, Avantgarde 95-02 20031 € 31,90 20033 € 34,90
R1200C, Avantgarde 97-02 20031 € 31,90 20033 € 34,90
R1200CL, Montauk MY 03-* 20035 € 31,90 20037 € 39,90
R1150RS /R1100S MY 01-* with Integral ABS 20035 € 31,90 20037 € 39,90
R1100S 94 - 11/00 20031 € 31,90 20033 € 34,90
R1100S MY 01-* without Integral ABS 20034 € 31,90 20036 € 39,70
R1100RT 92 - 01 20031 € 31,90 20033 € 34,90
R1150RT MY 00-* with Integral ABS 20034 € 31,90 20036 € 39,70
R1200GS, RT, S, ST 20034 € 31,90 20036 € 39,70
HP2 Sport MCB 792SV € 44,90
R1200R 20035 € 31,90 20037 € 39,90
S1000RR MCB 829SV € 50,90
S1000RR Sinter Road Racing brake pads MCB 829SRQ € 62,95
S1000RR Sinter Carbon Racing brake pads MCB 829CRQ € 75,20

www.mhornig.com 385
ZUBEHÖR - ACCESSORIES
Rear brake pads
Lucas brake pads
All brake pads are environmentally friendly manufactured
without asbestos, cadmium, lead and formaldehyde.

Models ArtNo. Price ArtNo. Price

Organic Pad Sintered Pad
F650, CS, GS, ST, Dakar 20022 € 30,90 20026 € 33,95
F650GS 2008-*/ F800GS, S, ST, GT, R / 20022 € 30,90 20026 € 33,95
F700GS
G650X models 20022 € 30,90 20026 € 33,95
K1100RS 92-96 / K1100LT 89 - 99 20024 € 28,90
K1200RS & GT (-05) 20024 € 28,90
K1200LT with and without Integral ABS 20023 € 30,80
K1200S,R / K1300R 20021 € 31,80 20025 € 35,50
R850/1100/1150GS, R / R1150RS/RT 20021 € 31,80 20025 € 35,50
R1100RT 20021 € 31,80
R1200C Montauk MY 93 - * 20021 € 31,80 20025 € 35,50
R1200CL 20023 € 30,80
R1100S 20021 € 31,80 20025 € 35,50
R1200GS, R, RT, S, ST 20021 € 31,80 20025 € 35,50
HP2 Megamoto 20025 € 35,50
HP2 Enduro MCB 648 € 29,90 MCB 648SH € 37,90
S1000RR, HP4, S1000R 20022 € 30,90 20026 € 33,95

Clutch lining
Clutch linings from Lucas are among the best
in the world!

Models ArtNo. Price

F 650, ST 94 - 00 & G650GS & Sertao H.MCC 604-7 € 79,90
F 650, ST 94 - 00 & G650GS & Sertao set clutch springs MEF 160-6 € 19,75
R1100R, RT, RS / K1100LT, RS / R850R (94-01), R850RT (95-01) H.MCC 602 € 81,50
K1200RS & GT H.MCC 607 € 82,95
R1100S, R1150GS & Adv., R, RT, RS H.MCC 608 € 82,50
R1200C & CL models H.MCC 608 € 82,50
R1200GS,HP2 / R1200RT, ST, S, R, RnineT MCC 609 € 83,90

386
 Oil Resistant Clutch
Our oil resistant clutch will not slip even when oil is on it,
which can happen very easily when the
simmering is broken.
This is a huge advantage for globe trotters, touring riders
and everybody who rides a lot.
Another advantage is that this clutch can transfer much
more torque than usual clutches.
The organic lining provides smooth transmission
of power and is also very durable.

Models ArtNo. Price

R60-R100 till 1976 - 09/1980 2122332 € 159,00
R80-R100 till 09/1980 2122512 € 159,00
K1/ K100RS 4V 89-93, K100/K100LT 83-91, K1100LT/RS 2122795 € 159,00
91-99

Alarm Disc Lock RK10

Quickly and easily attaches to the brake disc. Three keys
are included.
S.R.A homologated; independent alarm, which can be
turned on and off by the rider and intelligent alarm, which
needs a minimum vibrations to get activated; works with
CR2 batteries, which last very long and can be bought
anywhere; waterproof; steel housing.

With RK402, the lock can be mounted onto your motorcy-

cle, rkrem is the memory cable.

ArtNo. Description Price

rk10 Disc Lock RK10 € 129,90
RK402 Motorcycle mount € 27,90
rkrem Memory cable € 4,90

Disc Lock RK6

More security for your motorcycle. Drop-forged steel with
a 6,0 mm angled pin. Quickly and easily attaches to the
brake disc. If somebody tries to steal your motorcycle,
120 db will hold him off. Storage pouch, two keys and
allen key for changing the batteries.

ArtNo. Description Price

rk6 Disc Lock RK6 € 58,90
rkrem Memory Cable € 4,90

www.mhornig.com 387
ZUBEHÖR - ACCESSORIES
Front Brake Discs
Cool design, the finest high technology, with TUV, and all for an affordable price. After extensive testing and successful
application in motor sport, we introduce the new Lucas Alien brake disc to the marketplace.
Lucas brake discs are eye-catching at first glance. But behind the elegant design, there is really solid performance. The
basic material used for the Lucas brake discs is a high-strength steel alloy to the standard 35 HRC.

Models ArtNo. Price ArtNo. Alien Price

F650 94-00, F650CS 00-05, F650GS & Dakar MST 337 € 121,95 MST 337RAC € 125,95
00-07, F650GS twin 08-12 / G650 Xchallenge,
Country, G650GS, F650ST 97-00
F800S/ST MST 357 € 121,95 MST 357RAC € 128,95
K1200GT 03-* / K1200GT Integral 01-* MST 357 FS € 199,95
K1200LT, R, S / K1200RS 01-* (floating
R850R 04-07 / R1100S 01-04 system)
R1150GS/adv. 03-* / R1150R & Rockster
R1150RS / R1150RT Integral 00-*
HP2 Megamoto
R1200R, S, RT, ST, R850RT (Integral ABS) 01-06
K1200RS 97-00 / K1200LT 98-99 MST 239 € 122,95 MST 239RAC € 128,95
R850R 02-03 / R850GS 98-00 /R850C 99-00 MST 239 FS € 199,95
R1100S 98-00 / R1100GS (floating
R1150GS/Adv. 99-02 / R1200C&CL system)
R1200GS / HP2 Enduro
R850R 93-00 / K100RS 16V 89-92 / K1 MSW 200 € 209,95
K1100LT, RS
R1100R 95-* / R1100RS, RT

You can find more spare and wear parts

online: www.mhornig.com

Rear brake disc

Lucas brake discs are made of high-quality steel. Special surface avoids vibrations and corrosion. Maximum braking
guaranteed! With EU homologation!

Models ArtNo. Price ArtNo. Alien Price

F650 94-00, F650ST 94-00, F650CS 93-06, MST 330 € 88,95
F650GS & Dakar 99-07 / G650Xmoto 06-*,
G650GS & G650GS Sertao
F800S, ST, GT / K1200R, S MST 372 € 121,95 MST 372RAC € 128,95
R1200GS 04-12 / HP2 Enduro
R1200R 05-14 , S
R850GS 96-00 / R850R 94-96 / R850R 00-07 MST 331 € 122,95 MST 331RAC € 128,95
R1100GS 94-99 / R1100R 93-01
R1100RT / R1100S / R1150GS/Adv.
R1150R & Rockster / R1150RS, RT

388
 Fuel Filter
An efficient fuel filter is an absolute necessity
for advanced injection engines.
The filter paper has the perfect pore size in order to
assure constant and high-quality fuel supply.

ArtNo. Description Price

2325859 Fuel filter € 19,90

Spark plugs
(for other motorcycles please ask)
Not only in a race the right spark at the right moment can
determine victory or defeat.

Models ArtNo. Price

R1100GS, R, RT, RS, R850&1150GS, R850&1150R, R850RT, 50020 € 11,40
R1150RT, RS, R1100S, R850C&R1200C & Montauk
R1150 models and R1100S with twin spark per cylinder 50025 € 14,50
R1200C Montauk
K 1200 LT, RS & GT 50051 € 9,95
K1100RS & LT 50040 € 4,90
F650GS *-2000, F650GS Dakar *-2000, F650 93-96, F650ST *-00 50000 € 6,30
F650CS *-2002, F650CS *-2004 , F650GS 2001-2007, F650GS 206-241 € 8,95
Paris Dakar 2001-2007 , G650GS & Sertao
R80 models & R100R, GS, RS, /7 50030 € 5,95
F650GS (08-*), F800S, ST, GT, R F700/800GS 206-247 € 7,80
K1200S, R, GT (06-*), K1300S, R, GT 206-285 € 16,50

www.mhornig.com 389
ZUBEHÖR - ACCESSORIES
Batteries
Batteries in order to provide enough power for the start
and all other consumer circuits.
Developed for the highest requirements!

All batteries have to be charged before first use.

ArtNo. Description Dimensions Price

For BMW: F650 GS (08-*), F700/800GS, S, ST, GT, R / K1200R & RSport /K1200S
R1200GS & Adv. / R1200R, S, ST, RnineT, K1300R/S, R1250
61-GEL12 “Bike Power” GEL Battery 12V/12AH (L/W/H = 150/86/146mm) € 84,90
80013 YUASA/Toplife (maintenance free) 12V, (L/W/H = 150/85/145mm) € 82,90
12/14Ah (no gel battery)
161006 Gel battery “Landport BV” SLA 12V, (L/W/H = 152/88/147mm) € 78,90
12/14Ah
For BMW: K1100RS&LT, K1200LT, RS&GT / R850/1100/1150GS&Adv., R&Rockster, R850/1200C,
R1100/1150RT, RS, R1100S, R1200CL, RT (2005-13), K1600GT & GTL, K1300GT
80011 Gel battery EXIDE GEL 12V/19Ah (L/W/H = 186/82/174mm) € 149,80
161100 Gel battery Landport BV SLA 12V/19Ah (L/W/H = 182/78/171mm) € 89,90
For BMW: F650-models till 2007
80020 Normal battery 12V, 12/14Ah (L/W/H = 135/80/160mm) € 54,90
For BMW: HP2 models (Megamoto/Enduro/Sport), S1000XR, S1000R/RR 09-14
202-116 Maintenance free battery LICENCE (L/W/H = 150/87/110mm) € 87,90
12V/12Ah

You can find batteries for the R80/R100 models

online: www.mhornig.com

390
 SOUND
DESIGN
POWER
für deine BMW!

BMW R 1250 GS MY 18-

REMUS R8 mit Carbon-Hitzeschutzabdeckung
Edelstahl schwarz

Edelstahl schwarz Edelstahl matt Carbon

Shop online: www.mhornig.com

FUSSRASTENSYSTEME - FOOTPEG SYSTEMS

Adjustable Footpegs
The Vario footrest system (joint) will be mounted
to the motorcycle like the original footpeg.
The adjustable footrest system consists of
3 parts: Vario joint, Vario plate and the footrest.
All items are sold as a set for the left and the
right side.

Part 1
The Vario footrest system
(joint) will be mounted to the
motorcycle like the original
footpeg. The joint is silver
anodized.

Motorcycle model Driver joint Price Passenger joint Price

F650GS (08-), F700GS, F800GS 051 02 04 00 € 43,90 051 02 04 10 € 43,00
F800R, S, ST, GT 051 02 03 00 € 43,30 051 02 03 10 € 43,00
K1200S, R, R Sport, K1300S, R 051 02 03 00 € 43,30 051 02 03 10 € 43,00
K1200GT (06-) 051 02 01 00 € 43,30 051 02 01 10 € 43,90
K1300GT 051 02 01 00 € 43,30
R850GS, R1100GS, R1150GS & 051 02 04 00 € 43,90 051 02 01 10 € 43,90
Adventure
R850R 93-02, R1100R 051 02 01 00 € 43,30 051 02 01 10 € 43,90
R850R 02-07, R1150R 051 02 02 00 € 43,90 051 02 02 10 € 43,00
R1100RS 051 02 01 00 € 43,30 051 02 01 10 € 43,90
R1150RS & R1100S 051 02 02 00 € 43,90 051 02 02 10 € 43,00
R850RT, R1100RT, R1150RT 051 02 01 00 € 43,30 051 02 01 10 € 43,90
R1200GS 2004-2012 051 02 04 00 € 43,90 051 02 01 10 € 43,90
R1200GS Adventure 2005-2013 051 02 05 00 € 43,00 051 02 01 10 € 43,90
R1200GS & Adv. LC, R1250GS 051 02 09 00 € 43,00 051 02 01 10 € 43,90
& Adv.
R1200R (2005-2014), RnineT 051 02 03 00 € 43,30 051 02 03 10 € 43,00
(2013-2016)
R1200/1250R LC, 051 02 03 00 € 43,30 051 02 03 10 € 43,00
R1200/1250RS
R1200RT, R1200RT LC, R1250RT 051 02 01 00 € 43,30 051 02 01 10 € 43,90
R1200S, R1200ST 051 02 03 00 € 43,30 051 02 03 10 € 43,00
S1000XR 051021000 € 43,00 051 02 01 10 € 43,90
S1000RR, S1000R 051 02 06 00 € 43,00 051 02 05 10 € 43,00

392
 Part 2
The Vario plate is the part
between the footpeg and the
Vario footrest system (joint).
The Vario plate is available
in 3 lengths. We recommend
50mm only for the pillion
rider.

Art.No. Description Price

051 00 00 23 23 mm Vario Plate (for left and right) € 45,90
051 00 00 30 30 mm Vario Plate (for left and right) € 45,90
051 00 00 50 50 mm Vario Plate (for left and right) € 47,90

Part 3
The footpeg will be mounted to the Vario plate.
The Super Grip footpegs are available in silver or black with black rubber. The Racing footpegs are available in black
or silver. The Multi Grip footrests are available in silver/black and black/black.
All items sold as a set for the left and the right side.

Art.No. Description Price

050 00 04 00 1 Super Grip Footrest silver € 51,90
050 00 04 00 8 Super Grip Footrest black € 51,00

Art.No. Description Price

050 00 01 00 1 Racing Footrest silver € 31,00
050 00 01 00 8 Racing Footrest black € 31,00

Art.No. Description Price

050001000-1 Multi Grip Footrest silver € 81,90
050001000-8 Multi Grip Footrest black € 81,80

www.mhornig.com 393
WERKZEUG - TOOLS
Dynaplug Ultralite Tubeless Tire Repair Kit
The Dynaplug Ultralite is our new tire repair tool. Designed
for all tubeless tire applications, and exceptionally for
two-wheeled vehicles where light weight and compact size
are an advantage.
Engineered for repairing punctures in tubeless tires for
cars, trucks, motorcycles, scooters, campers, motor
homes, RVs and garden tractors with a maximum tire
thickness of 1-1/8“ (28mm) and a minimum thickness of
3/16“ (4,8mm) at the point of the puncture.

ArtNo. Description Price

DP-Ultralite Tire repair kit € 39,90
DP-Refill Refill pack € 14,50

Allen Key
High-quality Allen keys made of chrome-vanadium-steel
are almost indestructible. You can buy them in different
sets or as single items.
ArtNo. Description Price
Inbus1.510 Set 10 piece 1,5 - 10 € 15,90
Inbus3 Size 3 € 1,95
Inbus5 Size 5 € 2,35
Inbus6 Size 6 € 2,70

Torque wrench
1/2“ or 3/8“ with a large torque adjustment range,
TÜV certificated. You will need one when you work on your
rear wheel, oil filling screw, sump drain plug, handlebar
and so on.
ArtNo. Description Price
N30-200 1/2” 30-200Nm € 49,90
23350 3/8” 12-60Nm € 84,90

Torx keys
The Torx keys are made of high-quality chrome-vanadium-
steel and are almost indestructible.
You can buy them in a set or some as single items.

ArtNo. Description Price

T45 Torx Size T45 € 3,95
Torx1050 Set 9 piece T10-T50 € 17,90

394
Socket wrench set small
Socket wrench set small with 24 TX-tools made of high-quality chrome-vanadium-steel.
- For 6,3 mm (1/4“) drive: TORX screwdriver bits with inner bore T BO 8 - T BO 30 - Outside TORX E 4 - E 10
- For 12,5 mm (1/2“) drive: T 40 -T 60 - Outside TORX E 10 - E 18 - Three angled wrenches T6/T8/T10 - Robust steel
box (powder-coated)
ArtNo. Description Price
23102 Socket wrench set small € 59,90

Socket wrench set large

Socket wrench set large with 69 TX-tools:
- 7 TX-bit-sockets and bits T8 - T30 (1/4”) - 7 TX-sockets E4 - E11 (1/4”) - 7 TX-sockets E12 - E24 (1/2”)
- 9 TX-bits T15 - T60 (1/2”) - 5 TX-bits T40 - T60 - Tamper 7 TX-bits T10 - T40 (1/4”)
- 8 TX-screwdrivers T8 - T40 - 12 TX-keys T8 - T60 - 4 TX-spanners E6 - E2
- 1 Adapter 1/4”(square) x 1/2”(hexagonal) - one Adapter 1/2”(square) x 5/16”(hexagonal) - magnetic bolt
(similar to the picture)
ArtNo. Description Price
3033 Socket wrench set large € 189,90

ArtNo. Description Price

821559 1/2” change-over ratchet € 28,90
821558 1/4” change-over ratchet € 14,90
821557 3/8” change-over ratchet € 18,40
320010 E10 for 1/2” drive € 9,95
120010 E10 for 1/4” drive € 8,90
320020 E12 for 1/2” drive € 10,20

www.mhornig.com 395
KOFFERSYSTEME - CASES, TOPCASES AND ATTACHMENTS

Everything you want to take with you on your motorcycle journey will fit into these GIVI top cases.
In order to mount the top case you need the correct GIVI mounting system.

GIVI Top Case V56 GIVI Top Case V47

V56 MAXIA 4 Monokey top case V47 Monokey top case
Capacity: 2 helmets Capacity: 2 helmets
Size: W 600 mm, H 330 mm, L 480 mm Size: W 590 mm, H 320 mm, L 450 mm
Volume: 56 litres Volume: 47 litres
Max. load: 10 kg Max. load: 10 kg

ArtNo. Description Price ArtNo. Description Price

V56N V56 mat black € 329,00 V47N V47N mat black € 264,00
V56NT V56 Tech mat black € 329,00 V47NT V47N Tech mat black € 264,00

GIVI Top Case V40

V40 Monokey top case
Capacity: 1 helmet
Size: W 440 mm, H 340 mm, L 530 mm
Volume: 40 litres
Max. load: 10 kg
ArtNo. Description Price
V40N Mat black € 142,00
V40NT Tech mat black € 142,00

Top Case Bag

This bag helps you to load and unload your
motorcycle top case. Small parts or papers can be
carried in the pocket on the top of the bag and the cord
helps you to carry the bag comfortably. Waterproof mate-
rial. Fits for the top cases V56 / V47.

ArtNo. Description Price

7680542 Top case bags € 49,90
49 litres

396
 GIVI Gel Backrest E95S
Soft gel backrest for the GIVI E52, E55, V56, V47 and V46
top cases. Perfect for increasing passenger comfort while
riding. Contoured to relieve aches and fatigue. Black.
Mounts using included studs and nuts. Requires minor
drilling of the topcase using the supplied paper template.
Passenger comfort results may vary based on motorcycle
profile, passenger size, and topcase positioning.

ArtNo. Description Price

E95S Gel backrest € 52,00
for V46
E111 Gel backrest € 53,00
for V56
E134 Gel backrest € 44,90 E111
for V47

GIVI Top case mounting

The mounting system for the GIVI Monokey top cases can consist of a mounting plate or a mounting system.
You add the mounting system for your bike to your shopping cart and you will receive everything
you need to install the top case.

Modeles Art.No. Price

F650GS MY 00-03 / F650GS Dakar MY 00-03 F639 € 123,90
F650GS MY 04-07 / G650GS & Sertao SR685 € 61,00
F650GS MY 08-* / F700GS / F800GS SR5107 € 91,90
F650GS MY 08-* / F700GS / F800GS & Adv. (Aluminium) SRA5103 € 153,50
F800ST & F800GT & F800S E250 € 53,00
F800R SR691 € 245,00
K1100RS, K75, K100 E180 € 81,00
K1200RS MY 97-04 / K1200GT MY 00-05 F680 € 133,90
K1200GT MY 06 - * / K1300GT MY 09 - * E193 € 88,90
K1200R, R Sport / K1300R SR690 € 211,00
R850GS 94-01 / R1100GS 94-99 / R1150GS 00-03 SR694 € 133,50
R850R MY 95-02 / R1100R MY 95-01 F635 € 114,50
R850R New Version MY 03-06 / R1150R MY 01-06 SR683 € 90,00
R1100RS MY 94-98 / R1150RS E183 € 87,20
R1100S MY 98-06 F681 € 119,90
R1100RT MY 96-01 / R1150RT MY 01 E183 € 87,20
R1150RT MY 02-05 E191 € 83,00
R1200GS 04-12 (instead of the original mount) SR689 € 113,50
R1200GS 04-12 (on top of the original mount) SR684 € 106,00
R1200R MY 11-14 / R1200RT MY 05-* / K1600GT E193 € 88,90
R1200GS LC 2013-* (Aluminium, on top of the original mount) SRA5108 € 164,00

www.mhornig.com 397
KOFFERSYSTEME - CASES, TOPCASES AND ATTACHMENTS
Top case Trekker Dolomiti
Top Case Trekker Dolomiti Monokey with 30 liters or 46
liters capacity.
- Max. load: 10 kg
- Deep-drawn base and lid, stainless steel rivets
- Security Lock with standard dust-cover screw-top
- Hooks to attach an elasticated cargo net on the under-
side of the lid
- Four nylon belt-strap loops on the lid, which enable the
mounting of additional bags
ArtNo. Description Price
DLM30A 30 Liters silver € 335,50
DLM46A 46 Liters silver € 369,00
DLM46B 46 Liters black € 392,00
E164 Back Rest Pillion Rider € 60,00

Side Cases Trekker Dolomiti

Pair of 36 liters natural aluminium Monokey cases plus a third lock cylinder, all with the same key.
- Each case has a capacity of 36 litres
- Max. load: 10 kg
- To be mounted on PL and PLR side-case holders (adapter kit for use with PL / PLR pannier rails included)
- Dimensions (LxWxH): 495 mm x 242 mm x 379 mm

ArtNo. Description Price

DLM36APACK2 Side Cases Trekker Dolomiti 36 Liters (2 pieces) silver € 630,00
DLM36BPACK2 Side Cases Trekker Dolomiti 36 Liters (2 pieces) black € 672,00

GIVI Side Case mounting for E360 and E41

You will need the black steel mounting system in order to mount the GIVI side cases on your BMW. This side case
mounting is manufactured of steel, black coated and fits very good to the optical appearance of the bike.

Model Description Price

F650ST 97-99 PL185 € 124,00
F650GS 00-07 / F650GS Dakar 00-04 / G650GS & Sertao PL188 € 164,00
F800R PLR5118 € 223,50
K1300R (only for V35 side cases) PLXR691 € 225,00
R850GS 94-01 / R1100GS 94-99 / R1150GS 00-03 PL189 € 159,50
R1200GS 04 - 12 PL684 € 141,50
S1000XR (for Trekker Dolomiti) PLR5119 € 295,50
F800GS Adv., R1200GS & Adv. LC, R1250GS (for Trekker PLR5108 € 274,50
Dolomiti)
F650GS (08-), F700GS & F800GS PLR5103 € 266,20

398
 GIVI Side Case Set V35
Everything you want to take with you on your motorcycle
journey will fit into these side cases. There is enough
space for a helmet.
GIVI mounting system required Nr.: PLX688
Capacity: 34 litres
Dimensions (LxWxH): 526x316x394 mm
Weight: 5kg
Max. load: 10kg
Price includes a side case set (for left and right).
For F800S&ST, R1200R LC, R1200RS, K1300R.

ArtNo. Description Price

V35N black-black € 400,00
V35NT black-black Tech € 399,90

Inside Bag
This bag helps you to load and unload your
motorcycle cases. Small parts or papers can be
carried in the pocket on the outer side of the bag and
the chord helps you to sustain the bag. Waterproof
material.
Fits for side case V35.

ArtNo. Description Price

7680543L Left inside bag € 51,90
7680543R Right inside bag € 51,90

www.mhornig.com 399
WEICHTASCHEN - SOFT BAGS

Duffel Bag
With high-quality cords in order to fasten the bag on the
tail rack or on the rear seat. With a handle or a shoulder
strap for easy carrying.
Diameter 30cm, length 52cm.

ArtNo. Description Price

7653818 Duffel bag € 73,90
For all BMW models.

Saddlebags
With 19 litres each. left and right. The bags will be moun-
ted under the seat with two adjustable straps and lashing
straps. Each bag has a handle. The lower part of the bags
is made of special material which resists the heat of the
exhaust.
The bag must not directly touch the exhaust. There must
be a heat shield on the exhaust.
Each bag can be enlarged to 26 litres.

ArtNo. Description Price

Sat.Tom19-26 1 set saddlebags € 155,90
Fit for the BMW models:
F650, CS, GS, ST, Dakar and F800S,ST, GT, R and G650
and F650GS (08-), F700GS & F800GS

Tail-, Rear Seat Bag

Designed to perfectly fit on the rack or rear seat and with
the feature of expansion to allow even more capacity!
There is space for more than just the rain gear here -
expands from 8 litres up to 16 litres. Waterproof material,
reflective strips, attractive grey and black colour scheme
and the chord helps you to sustain the bag.
Volume: approx. 8/16 litres.
Dimensions: HSTBMW8 approx. 29 x 25 x 10 cm
HSTBMW8/16 approx. 29 x 25 x 14/21 cm

ArtNo. Description Price

HSTBMW8/16 Tail-, Rear Seat Bag € 72,90
8/16 litre
HSTBMW8 Tail-, Rear Seat Bag € 51,90
only 8 litre
regenhaube Rain protection cover € 9,90

400
 Tank Bag
A map pouch with a zipper is on top of the tank bag. This
tank bag can be used as a single map pouch (4,5cm
high), but also as a tank bag when you open the zipper
on the side (13,5cm high) with about 7 litres capacity.
W = 24cm; L = 28cm.
The tank bag will stay in place with 4 suckers (vacuum
suction). You can carry the tank bag easily with the
handle or with the shoulder strap. Waterproof material.
If you ride in extreme continuous rain, a protective cover
is very recommended as water can seep in the zips.
ArtNo. Description Price
Fits for the BMW models:
TM-pl7F Tank bag € 52,90 F800R, S&ST and R1200GS & Adv., S1000RR, S1000R,
HP2, R1200GS Adv. LC, G650GS. F650,CS.GS,ST,Dakar

Tank Bag
A map pouch with a zipper is on top of the tank bag. This
tank bag can be used as a single map pouch for map
size A5 (4,5cm high), but also as a tank bag when you
open the zipper on the side (13,5cm high) with about 7
litres capacity.
Width front = 22cm; width back = 17cm; length = 26cm;
The tank bag will stay in place with 4 suckers (vacuum
suction). You can carry the tank bag easily with the
handle or with the shoulder strap. Waterproof material.
If you ride in extreme continuous rain, a protective cover
Fits for the BMW models:
is very recommended as water can seep in the zips.
F650 (until 2008) and K1100RS,GT and K1200R,S,GT
ArtNo. Description Price K1300R,S,GT and R850/1100/1150GS&Avd.,
R1100S,R and R1150RS and R1200R,RT
TM-pl7 Tank bag € 52,80

Tank Bag 7L
With 7 litres volume and with a big map pouch. 10 cm in
height. The tank bag can easily be removed because of
the 4 suckers which ensure that the tank bag will stay in
place. It is also equipped with a handle and a removable
belt. The bag is waterproof, but if you ride for hours in a
rainstorm, a water protection would be useful.
Sizes (L x W x H): ca. 30 x 24 x 10 cm.

ArtNo. Description Price

TM-mini7 Tank bag 7 litres € 52,50

Fits for the BMW models:

R850/1100/1150GS & Adv., und R850/1100/1150R,
R850/1200C und R1100S, R / R1150RS, R1200CL,
R1100S, RnineT, R1200RS, R1200R LC

www.mhornig.com 401
WEICHTASCHEN - SOFT BAGS

Handlebar Bag
Small, smart bag for double-butted handlebars.
It will let you keep small items within a hands reach.
Particularly well-suited for bandages or a patch kit.
The bag is secured with two elastic straps and
three Velcro straps.
Colour: Black.
Volume: approx. 1 litre, waterproof!
Dimensions (L x W x H): 5 x 36 x 8 cm.

ArtNo. Description Price

0551228 Handlebar bag € 24,90

There is a video for this product online: www.mhornig.com

Fits for the BMW models:

R850/1100/1150GS & Adv., R1200GS & Adv., HP2
F650GS (08-*), F800GS, F700GS, R1200GS LC,
R1200GS Adv. LC, R1200R LC, S1000XR

402
 28 Litre
Top Case Bag
This bag helps you to load and unload
your motorcycle top case. Small parts or papers can be
carried in the pocket on the top of the bag and the cord
helps you to carry the bag.
Waterproof material.

ArtNo. Description Price

7680542 Big top case bag 49 L € 49,90 49 Litre

7680541 Small top case bags 28 L € 41,90

Small Top case Bag 28 Litres fit for BMW models:

all F800, R1200RT, K1200GT (06-) and K1300GT

Big Top case Bag 49 Litres fit for BMW models:

R1200RT, K1200GT (06-), K1300GT & K1600GTL

www.mhornig.com 403
WEICHTASCHEN - SOFT BAGS

Tank Bag 17L

With 10 - 17 litres volume, with a big map pouch.
The height can be changed from 14 - 24 cm.
The tank bag can easily be removed from the mounting
plate, for example to fuel the bike.
The tank bag is available with two different mounting
plates, one with suckers (vacuum suction)
and one with magnets.
It is also equipped with a handle and a removable belt.
The bag is waterproof, but if you ride for hours in a rain-
storm, a water protection would be useful.
Sizes (L x W x H): ca. 30 x 24 x 14 cm.

ArtNo. Description Price

TM-30.10-17S Tank bag with suckers € 114,90
TM-30.10-17M Tank bag with magnets € 124,90
regenhaube Rain protection cover € 9,90
Fits for the BMW models:
K1200S, R and K1300S, R
R850/1100/1150R and R850/1200C and R1150RS
R1100S, R and R1200CL, R

404
 Tank Bag 23L
With 16 - 23 litres volume and with a big map pouch.
On the left and on the right side, there is a small side
bag. You can enlarge the tank bag from 23 cm
to 33 cm in height.
The tank bag can easily be removed from the mounting
plate for example to fuel the bike.
The tank bag is available with two different mounting
plates, one with suckers and one with magnets. It is also
equipped with a handle and a removable belt.
The bag is waterproof, but if you ride for hours in a rain-
storm, a water protection would be useful.
Sizes (L x W x H): ca. 30 x 24 x 23 cm.

Map pouch A4 (KTA4) can easily be mounted

onto the tank bag.
Size 26 x 30 cm, Velcro fastener.

ArtNo. Description Price

TM-EN.M16-23S Tank bag with suckers € 119,90 Fits for the BMW models:
TM-EN.M16-23M Tank bag with magnets € 119,90 F650, F800GS & G650GS
K1200RS, GT and K1300GT
KTA4 Map pouch A4 € 20,90
R850/1100/1150GS & Adv., R850/1100/1150R
regenhaube Rain protection cover € 9,90 R1100/1150RT, R1200R, S, GS & Adv., HP2, ST

Tank Bag 22L

With 15 - 22 litres volume and with a big map pouch. On
the left and on the right side is a small side bag.
You can enlarge the tank bag from 22 cm
to 32 cm in height.
It is also equipped with a handle and a removable belt.
The bag is waterproof, but if you ride for hours in a rain-
storm, a water protection would be useful.
Sizes (L x W x H): ca. 24 x 26 x 22 cm.

This tank bag is also available in a set with two side bags.
The side bags have a volume of ca. 20 litres, can easily
be removed and carried with a chord.

Map pouch A4 (KTA4) can easily be mounted onto the

tank bag. Size 26 x 30 cm, Velcro fastener.

ArtNo. Description Price

TM-EN.M15-22 Tank bag 22 litres € 114,90
Fits for the BMW models:
KTA4 Map pouch A4 € 20,90
F650GS till 08-* and F700/800GS
regenhaube Rain protection cover € 9,90 S1000RR

www.mhornig.com 405
WEICHTASCHEN - SOFT BAGS

Inside Bags
These bags help you to load and unload your
motorcycle cases. Small parts or papers can be carried
in the pocket on the outer side of the bag and the chord
helps you to sustain the bag. Waterproof material.

ArtNo. Description Price

7680543L Left inside bag € 51,90
Fit for the BMW models: K1200LT, K1200RS, GT 7680543R Right inside bag € 51,90
( -05) and K1300GT, K1600GT & GTL, R1100S,
R850/1100/1150GS & Adv., R850/1100/1150R,
R1100/1150RS, RT and R1200R, RT, ST

Vario Case Bags

These bags help you to load and unload your motorcycle
cases. The bags are made for the Vario cases and their
size can be changed like a tank bag. Small parts or
papers can be carried in the pocket on the outer side
of the bag and the chord helps you to sustain the bag.
Waterproof material. The right bag can also be used as a
top case bag for the BMW Vario top case.

ArtNo. Description Price

7687610 Left Vario case bag € 51,90
7687611 Right Vario case bag € 51,90
or top case bag

Fit for the BMW models: R1200GS, R1200GS LC (sides

inverted), F650GS (08-*), F700GS, F800GS

Aluminium Case Bags

These bags help you to load and unload your motorcycle
cases. They are made for the aluminium cases. The bag
on the side of the exhaust is made of heat-proof material.
Small parts or papers can be carried in the pocket on the
outer side of the bag and the chord helps you to sustain
the bag. Waterproof material.

ArtNo. Description Price

7687615 Aluminium case bag, € 62,50
exhaust side
7687616 Aluminium case bag, € 62,50
Fit for the BMW models: cardan side
R850/1100/1150GS & Adv. and R1200GS & Adv.,
R1200GS & Adv. LC

406
 Universal Bag
This clever and waterproof bag is very useful on off-road
trips - it effectively prevents tools or other heavy objects
from sliding around in the case.
Besides tools and other objects, you can also pack your
rain outfit and food for the trip into the case.
The volume of this extremely robust toolcase
can be doubled with a simple zipper
and the case fits perfectly onto the aluminium cases
and the R1200GS Adventure case.
The bag also fits on the luggage racks
of many Enduro models.
A small luggage net makes this case
a multi-talented must-have.
Dimensions: L x B x H in cm: 40x20x12/24 (expanded).

ArtNo. Description Price

0551295 Universal bag € 89,80

Fits for the BMW models:

F650, CS, ST, F650GS and Dakar, F700GS, F800GS
R850/1100/1150GS & Adv., R1200GS & Adv.,
R1200GS & Adv. LC

Current news
here:
w w w.mhornig.com

Tool Bag
You can carry all your tools, extra bulbs, spare and wear
parts and much more in our tool bag for
the aluminium cases.
The bag is waterproof and has a handle on top so you
can easily put it into and out of the case.
Sizes LxWxH 40x20x7 cm.

ArtNo. Description Price

0551290 Tool bag € 20,90

Fits for the BMW models:

F650, CS, ST, F700GS, F650GS and Dakar, F800GS
R850/1100/1150GS & Adv., R1200GS & Adv.

www.mhornig.com 407
BEKLEIDUNG & AUFKLEBER - CLOTHES & STICKERS

Caps
100% brushed cotton in royal blue or black with a very
stable clasp for a good fit and the Hornig logo in order to
represent your brand awareness.

ArtNo. Description Price

C654royal Cap in royal blue € 7,85
C654black Cap in black € 7,90

T-Shirts
100% brushed cotton and a twin seam in royal blue or
black and with the Hornig logo in order to represent your
brand awareness.

ArtNo. Description Price

H186royalM Size: M in royal blue € 14,90
H186blackM Size: M in black € 14,90
H186royalXL Size: XL in royal blue € 14,90
H186blackXL Size: XL in black € 14,90

Sweat Shirts
50% cotton, 50% polyester, twin seam
and elastic cuffs in royal blue or black and
with the Hornig logo in order to represent
your brand awareness.

ArtNo. Description Price

H320royalM Size: M in royal blue € 19,90
H320blackM Size: M in black € 19,90
H320royalXL Size: XL in royal blue € 19,90
H320blackXL Size: XL in black € 19,90

408
 Stickers ArtNo. Description Price
130x75blue 130x75 blue € 3,99
UV-resistant in 2 sizes and 3 colours each.
130x75black 130x75 black € 3,99
130x75mm: the outlines of our logo are also the outlines 130x75weiss 130x75 white € 3,99
of the sticker.
50x25blue 50x25 blue € 0,90
50x25mm: rectangular. 50x25black 50x25 black € 0,90
50x25weiss 50x25 white € 0,95
Each is available in blue, black or white.

www.mhornig.com 409
ANFAHRTSSKIZZE & ARBER - LOCATION PLAN & THE ARBER

410
The Arber
Very close to our home base is the highest mountain in the Bavarian Forest. The Arber, at
1.456m (4,777ft) above sea level, a well-known ski resort with cable cars in the winter
months, becomes a very popular recreation area in the warmer seasons, much loved by
walkers and motorcyclists alike.
A 60km (38mile) round trip allows you to explore the mountain from two sides, using some
spectacular curving roads.
A rest stop at the motorcycle friendly restaurant on the shore of Lake Arber offers stun-
ning views of the nearby cliffs from the terrace. Parking for motorcycles is also part of the
service.
So, should you plan a tour of the region, feel free to pop in and see us, we’re sure we can
help you with a few tips for a memorable trip.

www.mhornig.com 411
SITZUMBAU - SEAT ALTERATION

F800GS
Alteration one-piece seat

We need about two weeks for this alteration.

It is necessary that you send us your seat, because we

change your seat.
R1150GS Adv. The seat should be in original shape and not altered
before.

A distinct fluting (middle of the seat is deepened)

releases the driver‘s tailbone and disperses the driver‘s
weight all over his bottom. Also, the seat gets broadened
for ca. 15 mm.

The padding consists of two layers, the upper one comfor-

tably soft and the lower one avoids denting.
Special contours for the pillion‘s seat avoid slipping when
the driver has to brake.

Available in three heights

(please note in the comment with number):
1: like the original one
R1200R 2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)

It is also possible to add just new leather without any

further changes.

We will change your seat exactly like you want it to be.

Please fill out your spec sheet and send it to us together

K1200R with your seat. The spec sheet can be found here:
Products - Your motorcycle model - Seats, trunks & bags
- Seat alteration.

ArtNo. Description Price

sb Seat black € 299,00

F800R

412
 R1150R
Alteration front & rear seat

We need about two weeks for this alteration.

It is necessary that you send us your seat, because we

change your seat. The seat should be in original shape
and not altered before.
It is not necessary to send us both seats, it also possible
to alter just one part.
The driver‘s and pillion rider‘s seat are equipped with a K1200GT
fluting in order to release the tail bone. The seats are also since 2006-*
broadened for about 15mm.

The padding consists of two layers, the upper one comfor-

tably soft and the lower one avoids denting.
We especially took care of the pillion rider‘s comfort:
Here, the seat is increased in the middle front part to
inhibit a cramped position.
These alterations enable a tangible comfortable riding -
free from pain. Also the vexatious sliding when the driver
brakes has an end now.
The seats are coated with slip resistant material.
K1200LT
Available in three heights
(please note in the comment with the article number):
1: like your original one
2: lower (- ca. 25mm)
3: higher (+ ca. 25mm)

It is also possible to add just new leather without any

further changes.

We will change your seat exactly like you want it to be.

Please fill out your spec sheet and send it to us together R1200RT
with your seat. The spec sheet can be found here:
Products - Your motorcycle model - Seats, trunks & bags
- Seat alteration.

ArtNo. Description Price

sitzF Driver’s seat black € 199,00
sitzS Pillion’s seat black € 194,00
s-g Extra charge black-grey € 29,00 R1200GS
(for each seat)

www.mhornig.com 413
ONLINE-SHOP
Use our 24-hour online shop to order from the comfort of your home. Here you will find our whole product range,
regularly updated and refined. All products are organised by motorcycle model, so with one click you can find specific
parts for your motorcycle. Our news and our newsletter give you the latest on our specials and activities to keep you up
to date. Customers outside Germany and Austria will find our shop items and information in English, Italian, Spanish,
French and Japanese language.

(2)

(1)

How to order?
First choose your motorcycle model (1) on the start page. You now have all model specific parts listed. These are sor-
ted in categories such as aluminium parts, carbon parts, exhausts, accessories etc. (2). Choose the category and click
on the product of interest (3). You will see a large picture, descriptive text of product, sizes and material, the article
number and price as well as more small pictures, all of which open to a large view with a mouse click.

(3)

(4)

414
To choose a product simply add it to your shopping cart with a click beyond the price (4). This will open a new page
showing which products are in your cart. The right hand column shows various shipping and payment options (see also
pages 416 and 417). You may choose to finalise the sale or continue shopping (5). To conclude the sale simply click
the button and a new page will open (6). First time users simply click on the top stripe and will get to a new page. Fill
in your address details and payment method.

(6)

(5)

Please fill in the * necessary fields, shipping method and terms of business and then click lower button (7) to conclu-
de the sale.

You will now see a list of all purchases, your address and costs
including handling charges.

Should any adjustments

be required, these may be
performed now, or click
the button to finalise and
get to the last page of your
order processing.

(8)

(7)

www.mhornig.com 415
ZAHLUNGSARTEN & VERSANDKOSTEN

Prepayment or bank transfer: Our bank account details will be sent to you on receipt of your order by e-mail.
Once payment is made we send your order.

PayPal: Online payment with PayPal. See www.paypal.com for more information. You can pay directly and comfortably
by PayPal Express. Please keep in mind that we can only ship to your PayPal shipping address. If necessary, modify
your PayPal shipping address before effecting the payment.

Credit Card: No extra charges. Payment with Visa or MasterCard. Simply add card number, name, validity, security
code and your order will be processed and dispatched as soon as possible.

Your advantages: When you order online:

* Shipping with DHL or UPS * Secure data transfer
* Insured shipping * Availability display
* Right to return 14 days * Online package tracking
* Money back guarantee * Easy and fast overview
* 2 years guarantee
* We treat your data in strict confidence
* Fast telephone and email service
* Many secure payment methods

IMPRINT
Motorradzubehör Hornig GmbH
Gewerbepark Chamünster Nord C 5
93413 Cham
Germany

Tel: 0049 (0) 9971 996 61-0

Fax: 0049 (0) 9971 996 61-10
info@mhornig.com
www.mhornig.com

CEO: Helmut Hornig

Register Court: Amtsgericht Regensburg
Register number: HRB 10330

VAT-ID-No.: DE251397246

416
PAYMENT METHODS & SHIPPING COSTS
Country EU (deliverer) / Order value under 30,-- Euro under 250,-- Euro over 250,-- Euro
Germany (Deutsche Post) € 4,90 € 6,90 € 0,00
Belgium (bpost/DHL) € 10,90 € 10,90 € 10,90
Denmark (Post) € 11,90 € 14,90 € 14,90
Estonia (AS Eesti Post) € 14,90 € 14,90 € 14,90
Finland (Posti) € 11,90 € 14,90 € 14,90
France (La Poste / Coliposte) € 10,90 € 10,90 € 10,90
Greece (Hellenic Posts/DHL) € 14,90 € 14,90 € 14,90
UK (UK Mail) € 10,90 € 10,90 € 10,90
Ireland (An Post) € 10,90 € 10,90 € 10,90
Italy (Poste Italiane/SDA/DHL) € 10,90 € 10,90 € 10,90
Latvia (Latvia Post/DHL) € 14,90 € 14,90 € 14,90
Lithuania (Lietuvos pastas) € 14,90 € 14,90 € 14,90
Luxembourg (P&T Luxemburg / DHL) € 14,90 € 14,90 € 14,90
Netherlands (PostNL / DHL) € 11,90 € 14,90 € 14,90
Poland (DHL) € 11,90 € 14,90 € 14,90
Portugal (DHL/CTT) € 10,90 € 10,90 € 10,90
Sweden (PostNord/Posten AB) € 11,90 € 14,90 € 14,90
Slovakia (Slovenská posta) € 14,90 € 14,90 € 14,90
Spain (DHL/Correos) € 10,90 € 10,90 € 10,90
Czech Republic (Ceska Posta) € 14,90 € 14,90 € 1490
Hungary (Magyar Posta) € 14,90 € 14,90 € 14,90
Austria (Österreichische Post/DHL) € 8,90 € 8,90 € 8,90
Bulgaria (DHL/Bulgarian Posts) € 14,90 € 14,90 € 14,90
Malta (DHL) € 14,90 € 14,90 € 14,90
Romania (Posta Romana/CARGUS) € 14,90 € 14,90 € 14,90
Slovenia (Posta Slovenije) € 14,90 € 14,90 € 14,90
Cyprus (Cyprus Post/Turkey Post) € 14,90 € 14,90 € 14,90
Country World / Order value under 30,-- Euro under 250,-- Euro over 250,-- Euro
Australia (Australian Post) € 29,90 € 39,90 € 49,90
Brazil (Correios) € 49,90 € 89,90 € 139,90
Hong Kong (Hongkong Post) € 29,90 € 39,90 € 49,90
Japan (Japan Post Service) € 29,90 € 39,90 € 49,90
Canada (Kanada Post) € 29,90 € 39,90 € 49,90
USA (USPS) € 29,90 € 39,90 € 49,90
Russian Federation (Russian Post) € 29,90 € 39,90 € 49,90
Switzerland (SwissPost) € 15,90 € 15,90 € 15,90

Find all countries online: www.mhornig.com

www.mhornig.com 417
 Your Address Customer-No:
(When available)

Last Name First Name

Street/Address

Postcode/Town:

Tel: eMail:

Order Form
by Mail or Fax:
Motorradzubehör Hornig GmbH +49 (0) 9971 / 99661-10
Gewerbepark Chammünster Nord C5
D-93413 Cham Your Motorcycle:

Germany Year of Construction

With ABS Without ABS Integral ABS

Amount Article-No. Article Name Price Sum

Total
Date / Signature
Shipping Costs: See “Shipping costs/
PayPal You will receive our bank account GTAC”
Cash in Advance
information, PayPal- or credit card-pay- You accept our terms and conditions with
ment-link with your confirmation. your signature.
Credit Card
GENERAL TERMS AND CONDITIONS
Catalog and online shop
Product range. All products listed in our catalog are correct at time of going to press. We reserve the right to change descrip-
tions, materials and prices as may be deemed necessary without notice. All product pictures are as up-to-date and precise
as possible. In some cases we have to use generic pictures. Because of this it is possible that the product which you will
receive is different from the product picture. When we can ship the ordered goods depends on our suppliers. We are not
liable for wrong or defective supplied products.
Product ownership
All products remain the property of Motorcycleparts Hornig GmbH until paid in full.
Prices
All prices are in Euro and include VAT at current rates.
Damage or shortfall of delivery
Any shortfall in delivery or damage in transit must be accompanied by a damage report from the freight carrier, and must
be completed at time of receipt of damages / short delivery. Should damage in transit become apparent on opening parcel,
the parcel should be returned immediately to the fright carrier for a damage report. We can not settle any claim without
a valid damage report. All damaged goods should be returned. Should your claim be valid we will either replace damaged
goods or refund in full. Please pay return postage. Any complaints regarding damage and / or shortfall must be brought to
our attention, in writing, within 5 days. Any returns must include a copy of the sales invoice. We will not accept any returns
that are unpaid.
Returned goods
Should you need to return goods, or wish to exchange any goods ordered you may do so within 14 days of delivery. Goods
must be in as new condition and in the original undamaged packaging. Goods returned will be refunded up to their value
and a refund will be via bank transfer, credit card or PayPal to your account. Postage will not be refunded. Please enclose
a copy of the sales invoice and the filled in return paper otherwise we can‘t take care properly about your return and it will
take much longer. Mounted or scratched windshields can‘t be returned and will not be refunded! Companies as well as
professional customers have no right to return, only private customers have this right. Goods which were manufactured
or ordered especially for you can‘t be returned. Our address: Motorradzubehör Hornig GmbH, Gewerbepark Chammünster
Nord C 5, 93413 Cham, Germany
You can use any courier you want to. Please check also GLS and DPD, they offer usually much better prices than the stan-
dard post service. Just make sure that we receive the package (for example insured package with tracking) and that we
receive the product in good condition (good packed).
Shipping times / Package tracking
You see in our shop if a product is in stock. Green means it is in stock, orange means it is not in stock, red means it will
take several weeks until it will be in stock again. We can just ship immediately products which are in stock.
We ship with DHL. The delivery will be usually made by their local partner.
You will receive an automatic email with your DHL tracking link after your package was shipped. You can see your shipment
number and your UPU code / matchcode (when available) on this DHL website. You can request more information about the
delivery of your package from DHL or their local partner with those numbers.
The usual shipping time within Europe is 3-10 working days. The usual shipping time for countries outside of Europe is 2-4
weeks or more. (No guarantee)
Shipping times depend on many parameters which we can‘t influence, for example weather, strikes, software errors at DHL
or their local partners, customs clearance and much more.
We can‘t accelerate the delivery and we can‘t change your shipping address once the package was shipped. Because of
this it makes no sense to order a product online in a foreign country which you need very urgent at a certain point of time.
We can help again, after the tracking wasn‘t updated for 14 days. Then we can start an inquiry. Read more about it under
„Shipping delay/Lost package“ below.
Shipping delay/Lost package
Motorcycle Parts Hornig GmbH will ship all packages from Germany using DHL. The delivery in some countries will be made
by your local postman. For example: Australia (Australian Post), Belgium (bpost/DHL), France (La Poste/Coliposte), United
Kingdom (Parcel Force (Royal Mail)), Italy (DHL, SDA), Netherlands (PostNL/DHL), South Africa (SAPO), Spain (Correos) and
USA (USPS). You can find a list with all their local partners here: /Shipping-Costs.html. In special cases for example strike
and others, DHL can also use another local partner for the delivery.
If DHL has not enough capacity on airplanes they can put your package on a boat, which will result in a shipping delay of
1-2 months (this happened very rarely to Asia, Australia and North America).
If your DHL live online tracking wasn‘t updated for 14 days and the package wasn‘t delivered, we can start an inquiry for
you. Then DHL and their partner in your country have up to 2 moths time to look for your package and deliver it. If they
can‘t deliver it within this time, your package was lost and DHL insurance will cover it. But the maximum value they will
cover is 500,- Euro.
Then we can ship your products again or refund your payment (maximum 500,- Euro, read above).
Wrong Shipping Address/Package not fetched
We don‘t know your address. If you entered a wrong shipping address, email us as soon as possible. If your package can‘t
be delivered because of a wrong shipping address, the package will be shipped back to us. This can take up to 2 months
and will cost an additional fee. If you want us to ship your package again to your correct shipping address, you have to pay
this fee and the shipping costs again. Otherwise your order will be canceled and only the product prices minus the additional
fee will be refunded! So please make sure that you enter your correct shipping address!
The same applies if you didn‘t fetch your package from your local post office or customs. (Your package will be stored at
your local post office/customs for usually about 1-2 weeks after your postman/customs couldn‘t reach you). In order to
avoid this problem please check your DHL (and their local partner’s) online package tracking.
Warranty
Any faults or defects of goods must be notified immediately. For OEM items sold by the manufacturer guarantee is applica-
ble. All products manufactured by us are guaranteed for a period of 12 months. Any warranty claim can only be settled if
a copy of sales invoice is included. International shipping costs are not part of any warranty, guarantee or exchange case.
Data protection
Your details will be used by Motorcycleparts Hornig GmbH for use of processing orders. Your details will not be passed
onto any third party.

In case of any legal claims our business address applies. Motorcycleparts Hornig GmbH, Gewerbepark Chammünster Nord
C 5, 93413 Cham, Germany.
Gewerbepark Chammünster Nord C 5
D-93413 Cham
Germany
Tel: +49 9971 / 99661-0
Fax: +49 9971 / 99661-10
www.mhornig.com
eMail: info@mhornig.com