IMPACT 4.04.
00 10/09/2025
Chassis ID Path
AA 350000 6010/Repair//Wheel alignment, check
Model Identity
FH (4) 182160379
Publish date ID/Operation
24/08/2024 60108-2
Illustrations may differ slightly from the actual vehicle being serviced. However, key
components addressed in this information are represented as accurately as possible.
Colours used in illustrations are for highlighting purposes only and do not correspond to the
actual colours of the vehicle.
All threaded fasteners that do not have a tightening torque specification in the information are
tightened to a standard torque. Standard torques are available in the following specification.➠
ENTITY MISSING: ih-8000000088-title
CAUTION
Important safety information.
Improperly performed work can cause personal injury or product damage.
▶ Pay close attention to reading through and understanding the information before work. Follow
the instructions carefully during the work.
Note
Check that the wheels and the steering wheel point straight ahead when the steering gear is
in the centre position.
Check that all springs are not damaged and that the installation has not been done so that the
vehicle leans over.
Check that there is no play in the wheel bearings.
Check that tyre pressure and tyre size correspond to the specification.
Check the tyres for wear and damage.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
1/7
IMPACT 4.04.00 10/09/2025
1 Set the key in position (0).
2 Check the air pressure of the tyres.
Note
Adjust if necessary.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2/7
IMPACT 4.04.00 10/09/2025
3 Check that the axle installations are free of wear and damage.
Service hint
Use play detectors.
Brake must be applied.
Note
Check that there is no play or any deformation in the track rods, king pins, bushings,
pitman arm and the auxiliary pitman arm.
4 Place the vehicle on a level surface with the steering wheel in the straight ahead position.
Tech data
Maximum surface unevenness for every 2 metres 0 ±3 mm
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
3/7
IMPACT 4.04.00 10/09/2025
Note
If a level surface cannot be achieved, the inclinometer kit provided by the tool
manufacturer can be used for level compensation.
5 Check that the steering gear is in the centre position.
Note
The slot on the steering shaft must be aligned with the markings on the axle
attachment.
Adjust if necessary.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
4/7
IMPACT 4.04.00 10/09/2025
6 Secure the steering wheel.
Service hint
Use a suitable tool.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
5/7
IMPACT 4.04.00 10/09/2025
7 Start the computer.
Note
Refer to the manufacturer's manual for instructions on use of the tool.
8 Install the wheel alignment tool.
Note
The towing anchorage holes at the front and the frame rail at the rear of the truck are
reference points for attaching the frame gauges.
Note
Refer to the manufacturer's manual for instructions on use of the tool.
9 Create a new order in the wheel alignment tool.
10 Measure the toe and camber angles by rolling procedure in the wheel alignment tool.
Note
Always measure the reference axle first.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
6/7
IMPACT 4.04.00 10/09/2025
11 Start the test.
Note
Follow the instructions and save the test.
12 Remove the tool.
13 Remove the wheel alignment tool.
14 Print report.
15 Shut down the computer.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
7/7
