HDMI OVER IP Features FRONT VIEW
HDTV resolution up to 1080p@60.
HDM-LNW
Extender HDMI signal up to 100 meter on HDTV.
Use CAT.5/5E/6 cable to install easily.
Support RS-232.
HDMI Compliant.
HDCP Compliant.
RS-232 Extender.
Supports Web server system setup.
1. 1x HDMI Output Connector (A-Type Female)
2. 1x HDMI Input Connector (A-Type Female)
3. 8 Pin DIP Switch
Specifications 4. Power jack (12V DC In)
Function HDM-LNW HDM-RNW
1 HDM-RNW
HDMI Input Connector NONE
(A-Type Female)
HDMI Output Connector 1 (A-Type Female)
HDM-LNW LED indicators POWER
LINK RJ-45 Connector x 1
3.5ψ Stereo Jack 355g
IR IN NONE
x1
3.5ψ Stereo Jack 1. 1x HDMI Output Connector (A-Type Female)
IR OUT NONE
x1
2. 8 Pin DIP Switch
IR Carrier Frequency 20KHz ~ 60KHz 3. Power jack (12V DC In)
BAUD RATE SETTING 3 PIN DIP SWITCH
DIP SW 8 PIN DIP SWITCH REAR VIEW
Power Adapter (Min.) DC 12V (LOCKING JACK) HDM-LNW
HDMI Output Max.
1080p@60 (8Bits) 1080P@60 (8Bits)
Resolution
HDM-RNW
HDMI Output (Color
YCbCr 4:4:4 RGB
Space)
USER MANUAL V1.1 Cat.5e Cable Distance 100 meters (Max.)
RS-232 Connector DB9 Female x 1
HDM-ENW 1. Power LED
2400 up to 115200 bps; 8 data bits,
Package Contents- Baud Rate
1 stop bit, no parity 2. System Reset
1x HDM-LNW and HDM-RNW Unit 3. Baud Rate Setting
1x user manual Housing Metal
4. IR Out
2x Power adapter DC 12V with lock Weight 338g 330g 5. RS-232 (DB9 Female)
4x screws Dimensions (LxWxH) 150x80x35mm 6. Link (RJ-45 Connector)
8x foot pads
1x IR receiver cable
1x IR blaster cable (Peak Wavelength 940nm)
Any thing missed, please contact with your vendor.
-1- -2-
HDM-RNW
Technical Specifications Output Signal
1. Power LED
2. System Reset
3. Baud Rate Setting DIP Switch Setting
4. IR In Buad Rate Setting Pin # Signal Pin # Signal
5. RS-232 (DB9 Female) Buad Rate PIN1 PIN2 PIN3
1 TMDS Data 2+ 11 TMDS Clock Shield
6. Link (RJ-45 Connector) 2400 OFF OFF OFF
2 TMDS Data 2 Shield 12 TMDS Clock -
4800 ON OFF OFF
3 TMDS Data 2- 13 CEC
9600 OFF ON OFF
Installation 19200 ON ON OFF 4 TMDS Data 1+ 14
Reserved
(N.C. on device)
1. Turn off the HDMI source and HDMI display. 28800 OFF OFF ON
2. Connect the HDMI cable between the HDMI source and 5 TMDS Data 1 Shield 15 SCL
38400 ON OFF ON 6 TMDS Data 1- 16 SDA
the “HDMI IN” port of HDM-LNW. 57600 OFF ON ON
3. Connect the HDMI cable between the HDMI display and 7 TMDS Data 0+ 17 DDC/CEC Ground
115200 ON ON ON 8 TMDS Data 0 Shield 18 +5V Power
the “HDMI OUT” port of HDM-LNW / HDM-RNW.
4. Connect the CAT.5/5e/6 cables between the HDM-LNW ID Setting 9 TMDS Data 0- 19 Hot Plug Detect
“LINK” port and the HDM-RNW “LINK” port of extender. ID PIN1 PIN2 PIN3 PIN4 PIN5 PIN6 10 TMDS Clock+
5. Connect the power cord of HDM-LNW and HDM-RNW. 0 OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF
5. Turn on the HDMI source and display.
※HDM-LNW ID and HDM-RNW ID must be the same. ︰ ︰ ︰ ︰ ︰ ︰ ︰
Wiring Information & Coding
7 ON ON ON OFF OFF OFF Conductor RJ-45 Pin Color Code for
︰ ︰ ︰ ︰ ︰ ︰ ︰ Identification Assignment Conductor
IR Receiver Cable Directions: 63 ON ON ON ON ON ON Pair 1
5 White-Blue
Put it into the HDM-RNW “IR IN” port and place the IR 4 Blue
Receiver Cable, so that you can point to it easily with your 1 White-Orange
Pair 2
IR remote controller. 2 Orange
3 White-Green
Pair 3
6 Green
7 White-Brown
Pair 4
8 Brown
IR Blaster Cable Directions:
Plug IR blaster cable plug into HDM-LNW “IR OUT” port, It
sits in front of the DVD receiver’s IR sensor, which is
located on the front-panel.
-3- -4- -5-
Support Resolution Web server system setup
Resolution Frequency(Hz) HDM-LNW (Server side)
Web setting address as below:
640x480 60 http://IP address (Default IP address TX board: 169.254.x.x
800x600 60 when no DHCP server assign IP address).
1024x768 60 username: admin
1280x768 60 password: 123456
1280x800 60 HDM-LNW web server support feature: video bit
1280x960 60 rate/resolution, DHCP/Fix IP, multicast group ID, update
1280x1024 60 f/w.
1360x768 60 File to Upgrade Firmware: XXX.PKG
1366x768 60 File to Upgrade Encoder Firmware: XXX.bin
1440x900 60
1400x1050 60 HDM-RNW (Client side)
1440x1050 60 Web setting address as below:
1600x900 60 http://IP address (Default IP address RX board:169.254.x.x
1680x1050 60 when no DHCP server assign IP address).
480i 60 HDM-LNW side web server support feature: DHCP/Fix IP,
480p 60 multicast group ID, update f/w.
576i 50 File to Upgrade Firmware: XXX.PKG
576p 50
1080i 50/60 Please don’t power off or reset/reboot device while board
1080p 25/30/50/60 f/w upgrade. HDM-ENW will reboot by self automatically
720p 50/60 when upgrade successful and see below info in web page.
© AV LINK GROUP LTD., All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-6- -7-
