OIL
SEPARATORS
Wh at is an oil separ at or ?
An oil separator is a compact device that
removes oil from water. The dimensions of the
oil separators are calculated according to oily
water flow. The separated oil from water are
collected inside the separator in a
compartment as the water is discharged into
the effluent lines.
Feat u r es
- Made from Stainless Steel, CTP or Epoxy
Coated Steel st37
- Equipped with high quality and unique
components
- Easy installation, easy operation and low
maintenance
- Excess oil storage and sludge / silt storage are
standard features on all our oil separators,
standard and automatic models.
- Adjustable weir is installed to control the oil
flow level to the internal access oil storage, a
standard feature on both manual and
automatic models
- Odor protection is a standard feature in all our
models. The separators are equipped with a
vent which may be connected to a stack and
odor removal housing.
- The heater keeps the excess oil at a constant temperature to prevent solidification
caused by cold weather. The heater works automatically when the excess oil?s
temperature drops below 15 C.
- Emptying valves are necessary when the system needs to be flushed.
- Excess oil and screen emptying valves are used to remove the excess oil and sludge
when the separator ?s storage is full.
- Sludge screen removal pump removes the accumulated sludge through the
filtration unit by de-watering. The sludge / silt pump works automatically.
- Excess oil pump removes the excess oil from the internal storage
- Excess oil level alarm system notifies the operator of the oil level inside the storage.
- Full protection control electrical board is equipped with various features and
options like current protection, heater temperature controls and many more.
Wh er e do you u se Oil Separ at or s?
- Food production factories
- Restaurants and cafeterias St an dar ds;
- Hotels and holiday sites Oil & Grease Separators complies
- Slaughter houses with EN825 -1 and EN825-2
- Meat / Fish processing factories standards
- Car maintenance shops and Garages
- Facilities that use / deal with oil
- Waste water treatment plants
- Power plants
Types & M odels
Oil & Grease Separators are designed for maximum efficiency and easy operation &
maintenance. Various models are available for specific requirements such as:
- Undercounter Type
- Automatic / Manual
- Aboveground / Underground
- Oil Separators with built-in Pumping Stations
Aboveground
Underground
Un iqu e Feat u r es
Our products are equipped with unique equipment.
Excess Oil Storage and Sludge/ Silt Storage are standard in all our oil
separators. Standard in Automatic and Manual Models.
Adjustable Weir is used during installation to arrange the oil flow level
to the internal excess oil storage. Standard in Automatic and Manual
Models.
Odor Protection is taken into consideration in all our design. Our
separators are equipped with a Vent which may be connected to stack
and an Odor Remover Housing.
Heater keeps the excess oil at a constant temperatures to prevent
solidification due to the climatic conditions. Works automatically when
the excess oil temperature drops below 15 C.
OWS Empty Valves are necessary in case the system needs to be
emptied.
Excess Oil & Silt Empty Valves are to be used to remove the excess oil
and silt when the separator storage is full.
Sludge Silt Removal Pump and Filtration Unit removes the
accumulated sludge and the filtration unit de-waters the sludge. The
sludge/slit pump works automatically.
Excess Oil Pump removes the excess oil from the internal storage.
Excess Oil Level Alarm System notifies the operator for the oil level
inside the storage.
Full Protection Control Board is equipped with various features and
optionals from electrical current protection, heater temperature
controls and many more.
EQUIPM ENT / INSTRUM ENTATION
Equ ipm en t / In st r u m en t Au t om at ic Separ at or s M an u al Separ at or s
Removable Silt Screen S S
Adjustable Weir S s
Excess Oil Storage S S
Excess Sludge Storage S S
Indirect Oil Heater S S
OWS Empty Valves S S
Excess Oil & Silt Empty Valves S S
Sludge/Silt Removal Pump S -
Sludge/Silt Filtration Unit S -
Excess Oil Removal Pump S -
Excess Oil Level Alarm System S O
Full Protection Control Board S O
S / Standard
O / Optional
- / NA
Con t r ol Un it Feat u r es
f or Au t om at ic M odels
On ly applicable f or m odels: ZU (Un der Gr ou n d)
/ ZA (Above Gr ou n d)
Con t r ol Boar d Feat u r es
- 4x20 mAh led screen with LCD
panel / color display touchscreen
- Timer system with 90 days reserve
- Current measurement and
monitoring every pump and
equipment
- showing on/of position and total
operation time
- Active and passive options for every pump and equipment
- Maximum protection with Operational Voltage Set feature
- Main voltage measurement with emergency shut down for over or under-voltage
- For each instrument there is a led indicator on the screen
- Digital temperature control for separated oil heater. 'full', 'empty' signals and level
detection for the waste oil
- Operational Logging and monitoring on LCD screen
- Contact relays for malfunctions or alert such as; 'full oil', 'fault', 'no network', 'over
voltage' for main control systems (i.e. SCADA)
- Log listing for; "Commissioning Date, Serial No., Malfunction History, Last
Maintenance Date"
- Set feature for all controls and "Back to Factory Settings" feature
- Alarm with Sound (Buzzer), Light (Led) and in Text (LCD Screen)
- Optional SMS module for text messaging in case of failure or alarm
+90 212 876 2282 - +90 212 876 3832
w w w.k azan cioglu .com
bilgi@k azan cioglu .com
Beylik dü zü O.S.B. M er m er ciler San ayi
Sit esi 3. Cadde No:21
Beylik dü zü / ?STANBUL
TURKEY
