MATERIAL SAFETY DATA SHEET

Doc. No. : QF0306/01

MSDS No.: 625 Revision No. : 00
Page: 01 of 03 Revision Date 00/00/0000
1. Product and Company Identification:
Product Name PP RAL 9005 Glossy
Product Code PBkS-002
Brand "RAPIDCOAT"
Name of Commodity Epoxide Resin
Intended Use Application for industrial use.
Excise Tariff No. 39079990/39073090/39073010.
Manufacturers Name Rapid Coat Division (Unit of Rapid Engineering Co. Pvt. Ltd.)
Address A-11/1, Site IV, Industrial Area, Madan Mohan Malviya Marg,
Sahibabad, UP-201010, India.
Email mail@rapidcoat.com
Website www.rapidcoat.com
Fax No. :+91-120-4041601
Emergency Contact No. :+91-120-4041680/+91-120-4041678.

2. Composition/Data on Components: This product is Epoxide resin in nature for industrial use.
Constituents
% BY WEIGHT. DESCRIPTION. CAS-No. EINEC NO R.– phrases
45 - 60 Resin 1860-26-0 - --
5 -- 8 . Hardener 6334-25-4 - --
20 - 30 Filler 7727-43-7 - --
0 - 25 Titanium Dioxide 13463-67-7 - --
0.01-20 Pigment 57455-37-5 - --

3. Hazardous Identification:
No significant health hazard is expected if used according to instructions. It must be handled and used taking all
precautions normally required by chemical substances. Therefore any contact with eyes, its inhalation and ingestion of
powders must be avoided.

4. First Aid Measures:

Inhalation Remove to fresh Air.
Contact with eyes Flush eyes with plenty of water
Contact with skin Flush with water.
If Ingestion ( swallowed) Give a glass of water to drink.

5. Actions in Case of Fire:

In case of fire, cool endangered containers with water spray.
Hazards from combustion products:.
Combustible solid. On burning will emit toxic fumes, including those of oxides of carbon .
Precautions for fire fighters and special protective equipment:
Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of exposure to vapor or
products of combustion.
Due to toxicity it is recommended fire-fighting personnel to be equipped with autonomous insulating breathing apparatus.
Suitable Extinguishing Media: Fine water spray, normal foam dry agent (carbon dioxide, dry chemical powder).

6. Actions in Case of Unintentional Release:

Emergency procedures:
If contamination of sewers or water ways (sewage, ground water,,river, lakes etc.) has occurred advise local.
Emergency services
Methods and materials for containment and clean up:
Wear protective equipment to prevent skin and eye contact and breathing in dust. Work up wind or increase
ventilation.Cover with damp absorbent (inert material, sand or soil). Sweep or vacuum up, but avoid generating dust.
Collect and seal in properly labelled containers or drums for disposal.
 MATERIAL SAFETY DATA SHEET
Doc. No. : QF0306/01
MSDS No.: 625 Revision No. : 00
Page: 02 of 03 Revision Date 00/00/0000

7. Handling and storage:

Handling: Provide good ventilation. Smoking, eating and drinking are prohibited in
premises where preparation is used.
Storage: Store in a cool, dry well ventilated place, out of direct sunlight light, away
from ignition, heat or solar radiation. Storage at 5 to 25 ºC is recommended.
Empty container precautions: Container can be hazardous when empty. Follow label warning even after
container is empty. since empty container may retain product residue. Do
not reuse empty container without professional cleaning for food, clothing
or products for human or animal consumption or where skin contact can
occur.

8. Maximum Exposure Limits and Personal

Protection Equipment:
Breathing protection: Avoid breathing dust. Wear nose mask.
Eye protection: Wear safety glasses with side protectors. An eye wash facility should be
readily available.
Skin protection: Wear protective clothing and appropriate impermeable gloves.
Personal hygiene: Do not eat, drink or smoke before hand wash.(S20/21)
Wash hands with soap and water on completion of work and before breaks.
Exposure Limit Value: TWA(0.1MEL) mg/m3
(1) Long Term Exposure Limit-8-hour time weighted Average.
(2) Short Term Exposure Limit-15 minute reference period.
(3) ‘MEL’ indicates Maximum Exposure Limit.

9. Physical and Chemical Properties:

Colour : Black
Physical state : Powder
Odour : Characteristic
Flash point (ºC) : Not relevant
Change of state (ºC) : Not ascertained
Ignition temperature (ºC) : > 400 deg. Cel.
Explosion limits : Not relevant
Solubility at 20 ºC : Insoluble in water
pH value : Not applicable
Viscosity at 20 ºC (ps) : Not relevant
Additional information : Solid content 100% b.w.
Relative Vapor Density (air=1) : Not applicable
% Volatile by Weight : <1
Evaporation Rate : 0%.
Boiling Point (°C) : Not applicable
Flammability Limits (%): Not available
Decomposition Point (°C) : Not available

10. Stability and Reactivity:

The preparation is stable at the handling and storage conditions recommended.
Conditions to avoid : Exposed to temperatures superior at 40 deg. Cel., the preparation can begin
lump formation. Avoid contact with foodstuffs.
Hazardous products of decomposition : In case of fire, formation of toxic gas, Carbon oxides, nitrogen oxides..
Hazardous reactions : None if used according to instructions. Avoid contact with powerful
oxidizing agents as well as strongly acid and
 MATERIAL SAFETY DATA SHEET
Doc. No. : QF0306/01
MSDS No.: 625 Revision No. : 00
Page: 03 of 03 Revision Date 00/00/0000

11. Toxicological Information:

:Stable under normal conditions of use.
No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet.
Symptoms or effects that may arise if the product is mishandled and overexposure occurs are:
Ingestion: No adverse effects expected..
Eye contact: No problem.
Skin contact: No Problem.
Inhalation: No Problem
Long Term Effects:
No information available for the product.
Toxicological Data: No LD50 data available for the product.
No TLV specified for the preparation as a whole.

12. Ecological Information:

Eco toxicological information -No data available.
In general, Keep away from drains. Other wise powder can contaminate water and harmful to aquatic environment.

13. Information on Disposal:

Do not dispose into drains or waterways. Waste from this product is not hazardous as defined under the Resource
Conservation and Recovery Act(CRCA) 40 CFR 261. Recycle or dispose waste in compliance with current legislation or
controlled incineration in an authorized center.

14. Transport Regulations:

Road and Rail Transport:
Not classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for transport by
Road and Rail; NON-DANGEROUS GOODS.
Marine Transport:
Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for
transport by sea; NON-DANGEROUS GOODS
Air Transport:
Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods
Regulations for transport by air; NON-DANGEROUS GOODS.

15. Regulatory Information:

None

16. Additional Information:

None
Above information pertains to this product as currently formulated and is based on the information available at that time. Since conditions of use
at outside our control, we make no warranties,implied and assume no liability in connection with any use of this information.
17. Other Salient Features:
1 Heavy metals (lead,Chrome,Cadmium,Mercury etc.) Free powder in conformance with strict environmental standards like
EN71 Part III, ROHS.
2 We can match all colors as per internationally accepted RAL (RAL80-HR & RAL841 GL), pantone, NCS and IS standards (IS
5:1994) shades
3 Customized color and finishes can be offered

This is a computer generated documents hence doesn't need any signature.