Abloy Oy Wahlforssinkatu 20 P.O. Box 108 FI-80101 Joensuu, Finland | Tel. +358 20 599 2501 | abloy.
com
ABLOY® EL420
High security DIN standard motor lock for narrow
profile doors
Product description
High security locks EL420 is used in environments where convenience, higher security, high
durability or door automation is needed. The integrated monitoring contacts from the lock
can be connected to the different systems.
Deadbolt is withdrawn inside the lockcase by motor and double action latch is released,
when electrical control is on. Door is opened from outside by using door pull.
Also possible to connect with door automatics for full hands-free operation.
Inside handle opens lock mechanically (exit function), no need for electric control.
When door closes, dead bolt is thrown out automatically, double action latch is blocked and
the lock case is secured on two points.
Overview of Advantages
• Motorized bolt traction for push&pull and door automatics use
• Day/night mode
• Electric anti-tampering: if deadbolt is thrown out when door is not closed, it is withdrawn
automatically.
• Mechanical automatic deadlocking
• Reversible handing, left/right
• Burglary-resistant, due to dead bolt with 20 mm throw
• Exit function from inside handle
• Suitable for fire-rated doors
• Mechanical override with cylinder
• Back-up function: If deadbolt is withdrawn by motor, when power is down, deadbolt is driven
out immediately (closed door) or allowed to come out (when door is closed).
• Monitoring functions
• Door status
• Handle down
• Bolt deadlocked
• Bolt in
• Key cylinder used
60 • Sabotage loop
55 / 5
50 /
45 / 5 / 40 / 4
3
30 / Scope of delivery
• 1 pc lock case
20.5 • 1 pcs control unit EA420
• Operating manual
Ordered separately
10.5 • Strike plate (e.g. EA324)
• Cable EA218 (6m) / EA219 (10m)
101
• Lead cover EA280/281
• Handle/pull set (e.g. EH070)
• Cylinder (e.g. CY321T)
91
5.5
10
22
254
8/ 9 Technical data
25
300
Handing Reversible handing, lef/right
39
21.5
25
Exit function Yes
92(PZ) / 94 (RZ)
8.5
8 Mechanical cylinder override Yes
12 6
Latch Double action latch
20
5.5 Dead bolt Yes, 20mm
8 Input operating voltage 12-24 VDC
35
12-18 VAC
22
Rated current consumption 12 VDC idle 80mA, normal drive
17
450mA, max. 1300mA
15
24 VDC idle 40mA, normal drive
32
8
220mA, max. 600mA
4.5 x 2
Relay capacity (monitoring contacts) Max. 0.8 A 30 V AC/DC resist. 20 W
30
Suitable for fire doors Yes
20
EN14846:2008 3S8C- L611
3 EN179:2008 376B1342AB
EN1125:2008 376B1321AB
24 / 2
8
This content is protected by Intellectual Property Rights Laws. The title to the content shall not pass to you, and instead shall remain with Abloy Oy or a third party holding the title. Abloy develops
continuously the products and solutions offered. Therefore, the information contained in the document is subject to change without notice. ABLOY PROVIDES THIS CONTENT ON AN “AS IS” BASIS
WITHOUT ANY WARRANTIES OF ANY KIND, EXPRESS, IMPLIED, OR STATUTORY.”
