Page 1 / 3

Certificate number: 60979/A0 BV

File number: ACE15/681/5
Product code: 2661H
This certificate is not valid when presented without the full attached schedule
composed of 7 sections

www.veristar.com

TYPE APPROVAL CERTIFICATE

This certificate is issued to
RITTAL GmbH & Co. KG
Herborn - GERMANY
for the type of product
ENCLOSURES / CABINETS / BOXES (LOW VOLTAGE)
AX and KX series

Requirements:
Bureau Veritas Rules for the Classification of Steel Ships

This certificate is issued to attest that Bureau Veritas Marine & Offshore did undertake the relevant approval procedures for the product identified
above which was found to comply with the relevant requirements mentioned above.

This certificate will expire on: 28 Aug 2025

For Bureau Veritas Marine & Offshore,

At BV HAMBURG, on 28 Aug 2020,
Dirk Hoepfner

This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied
with and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product,
which have not been notified to, and agreed in writing with Bureau Veritas Marine & Offshore. Should the specified regulations or standards be amended during
the validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards
apply. This certificate is issued within the scope of the General Conditions of Bureau Veritas Marine & Offshore available on the internet site www.veristar.com.
Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against Bureau Veritas Marine & Offshore for any
liability arising out of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the
Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may provide.

The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=vnwoug260r

BV Mod. Ad.E 530 June 2017 This certificate consists of 3 page(s)
 Page 2 / 3

Certificate number: 60979/A0 BV

THE SCHEDULE OF APPROVAL

1. PRODUCT DESCRIPTION :
The AX and KX series are empty enclosures for wall mounting.

Type/Series Description Dimensions Degree of protection

AX Compact enclosure Single or double door Sheet steel: IP66, IP55 (with double door)
Width: 300 up to 1200 mm
Height: 300 up to 1400 mm
Depth: 210 up to 400 mm

Stainless steel:
Width: 300 up to 1000 mm
Height: 300 up to 1200 mm
Depth: 210 up to 300 mm
KX Terminal Box Single cover with or Sheet steel: IP66, IP55 (with gland plate)
without gland plate Width: 150 up to 800 mm
Height: 150 up to 400 mm
Depth: 80 or 120 mm

Stainless steel:
Width: 150 up to 400 mm
Height: 150 up to 300 mm
Depth: 80 or 120 mm
KX E-Box Single door Sheet steel: IP66
Width: 150 up to 380 mm
Height: 150 up to 800 mm
Depth: 80 up to 155 mm

Stainless steel:
Width: 200 up to 380 mm
Height: 300 mm
Depth: 150 up to 155 mm
KX Bus Enclosure Single cover Sheet steel: IP66, IP65 (with viewing
Width: 400 up to 800 mm window)
Height: 200 or 300
Depth: 155 mm

Stainless steel:
Width: 200 up to 600 mm
Height: 200 or 300 mm
Depth: 80 or 120 mm

2. DOCUMENTS AND DRAWINGS :

- A086731dated 13.09.2018; A087205 dated 05.11.2018; A087206 dated 07.11.2018; A086825 dated 30.06.2018;
A087204 dated 05.11.2018; A086806 dated 16.05.2017; A086777 dated 29.06.2018; A086845 dated 13.05.2017;
XWW00195EN1907; XWW00196EN1907

3. TEST REPORTS :
- IP test reports tested at Rittal GmbH & Co. KG:
174/19 dated 25.11.2019, 310/19 dated 22.03.2019, 498/19 dated 26.07.2019, 535/18 dated 10.10.2018
556/19 dated 15.04.2019, 772/19 dated 01.07.2019, 865/19 dated 30.07.2019, 870/19 dated 05.08.2019
857/19 dated 05.08.2019, 924/19 dated 24.07.2019, 1095/19 dated 26.08.2019, 1264/18 dated 08.01.2018
1268/18 dated 25.01.18, 1323/18 dated 27.11.2018

4. APPLICATION / LIMITATION :
4.1 - Bureau Veritas Rules and Regulations for the Classification of Steel Ships
4.2 - Certification applies to degree of protection only.

The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=vnwoug260r

BV Mod. Ad.E 530 June 2017 This certificate consists of 3 page(s)
 Page 3 / 3

Certificate number: 60979/A0 BV

5. PRODUCTION SURVEY REQUIREMENTS :

5.1 - The above mentioned products are to be supplied by Rittal GmbH & Co. KG in compliance with the type described in
this certificate.
5.2 - This type of product is within the category HBV of Bureau Veritas Rule Note NR320 and as such does not require a BV
product certificate.
5.3 - Rittal GmbH & Co. KG has to make the necessary arrangements to have its works recognised by Bureau Veritas in
compliance with the requirements of NR320 for HBV products.:
Rittal Hof GmbH & Co. KG Rittal RKS Kleinschaltschränke GmbH
Industriestrasse 24 Rudolf Loh Straße 1
D-56472 Hof D-35708 Haiger
Germany Germany

6. MARKING OF PRODUCT :
- Maker's name or trademark
- Equipment type or model identification
- Date of manufaturer and/or serial number

7. OTHERS :
7.1 - It is the responsibility of Rittal GmbH & Co. KG to inform shipbuilders or their sub-contractors of the proper methods of
fitting, use and general maintenance of the approved equipment and the conditions of this approval.

*** END OF CERTIFICATE ***

The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=vnwoug260r

BV Mod. Ad.E 530 June 2017 This certificate consists of 3 page(s)