Scribd
Upload
7 views2 pages

Solenoid Valve ODE

The document provides specifications for a 2/2 way normally closed solenoid valve with pilot control, suitable for fluid automation and heating applications. It outlines the operational requirements, materials used, maximum pressure ratings, and temperature ranges for various components. Additionally, it includes information on available spare parts and dimensions for different pipe sizes.

Uploaded by

charles.e.nader
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views2 pages

Solenoid Valve ODE

The document provides specifications for a 2/2 way normally closed solenoid valve with pilot control, suitable for fluid automation and heating applications. It outlines the operational requirements, materials used, maximum pressure ratings, and temperature ranges for various components. Additionally, it includes information on available spare parts and dimensions for different pipe sizes.

Uploaded by

charles.e.nader
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Solenoid valve 2/2 way N.C.

21W3KB190
÷
With pilot control 21W7KB500

PRESENTATION:
S.V. with pilot control for interception of fluids compatible with
the construction materials.
A minimum operational pressure of 0,2 bar is required.
The materials used and the tests carried out ensure maximum
reliability and duration.
USE: Automation
Heating

PIPES: G 3/4 - G 2

COILS: 8W - Ø 13
BDA - BDS - BSA 155°C (class F)
BDP 160°C (high mperature)
BDF - BDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN
MATERIAL.
Max. allowable pressure (PS)
G 3/4 - G 1 25 bar
G 1 1/4 - G 2 16 bar
Environment temperature:
with coil class F or high temperature - 10°C + 60°C
with coil class H - 10°C + 80°C

Gaskets Temperature Medium


B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water

E=EPDM
- 10°C +140°C Water, low pressure steam
(ethylene-propylene)
Mineral oils (2°E), gasoline
V=FKM (fluoroelastomer) - 10°C +140°C
gas oil

For seals other than NBR replace the letter “B” with the ones
corresponding to the other seals. E.I. 21W3KE190.

Ø Pressure
Pipe Max viscosity Kv Power
Code min M.O.P.D.
ISO 228/1
cSt °E mm l/mn (watt) bar AC bar DC bar
G 3/4 21W3KB190 19 140
16 16
G1 21W4KB250 25 190
G 1 1/4 21W5KB350 12 ~2 35 400 8 0,2
G 1 1/2 21W6KB400 40 520 10 10
G2 21W7KB500 50 750

CE Approval
(Pressure Equipment Directive 97/23/CE)
for EV 21W5÷21W7

The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior

05-03-2009 ODE 21W3KB190 ÷ 21W7KB500


MATERIALS:
Body Brass - UNI EN 12165 CW617N
Armature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal Standard: B=NBR
On request: E=EPDM V=FKM
Orifice Brass - UNI EN 12165 CW617N
On request:
Connector Pg 9 or Pg 11
Connector conformity ISO 4400
FEATURES:
Electrical conformity IEC 335
Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
SPARE PARTS:
1. Coil: KIT:
See coils list KT130KB30-A=2+3
2. Complete plunger:
Code R450886/B MAINTENANCE KIT:
3. Complete armature tube: G 3/4-G 1
Code R450606 KTG0W3KB19=2+4+5
4. Gasket O-Ring: G 1 1/4-G 1 1/2
G 3/4-G 1 Code R990002/B KTG0W5KB35=2+4+5
G 1 1/4-G 1 1/2 Code R990005/B G2
G2 Code R990081/B KTG0W7KB50=2+4+5
5. Complete diaphragm:
G 3/4-G 1 Code R450431/B
G 1 1/4-G 1 1/2 Code R450466/B
G2 Code R450432/B
DIMENSIONS:

Pipe A B C
Type
ISO 228/1 mm mm mm
COIL POWER ABSORPTION DIMENSIONS
21W3KB190 G 3/4 105
65 104 W Inrush Hold TYPE D E F
21W4KB250 G1 112
VA ~ VA ~ mm mm mm
21W5KB350 G 1 1/4
98 125 144 8W 25 14,5 B 30 42 54
21W6KB400 G 1 1/4
21W7KB500 G2 118 141 172

21W3KB190 ÷ 21W7KB500 ODE 05-03-2009

You might also like