Scribd
Upload
1 views1 page

Service Thinkp t30 38

The document provides instructions for entering hibernation mode on a computer, detailing various methods such as key combinations and power switch actions. It also explains automatic triggers for hibernation based on inactivity or low battery conditions. Upon powering on, the system resumes operation by reading the hibernation file from the hard-disk drive to restore the previous state.

Uploaded by

burdiles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1 views1 page

Service Thinkp t30 38

The document provides instructions for entering hibernation mode on a computer, detailing various methods such as key combinations and power switch actions. It also explains automatic triggers for hibernation based on inactivity or low battery conditions. Upon powering on, the system resumes operation by reading the hibernation file from the hard-disk drive to restore the previous state.

Uploaded by

burdiles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Related service information

resume normal operation, you will get an error


message, and you will have to restart the system.

To cause the computer to enter hibernation mode, do any


of the following:
v Press the Fn+F12 keys.
v If you are using the APM operating system and have set
the mode to Power switch mode [Hibernation], turn
off the power switch.
v If you are using the ACPI operating system and have
defined one of the following actions as the event that
causes the system to go into hibernation mode, perform
that action.
– Closing the lid.
– Pressing the power button.
– Pressing Fn+F4 keys.

Also, the computer goes into hibernation mode


automatically in either of the following conditions:
v If a “hibernation time” has been set on the timer, and the
user does not do any operation with the keyboard, the
TrackPoint, the hard-disk drive, the parallel connector, or
the diskette drive within that time.
v If the timer conditions are satisfied in suspend mode.
v If you are using the APM operating system and have set
the mode to Hibernate when battery becomes low,
and the battery charge becomes critically low.

When the power is turned on, the computer returns from


hibernation mode and resumes operation. The hibernation
file in the boot record on the hard-disk drive is read, and
system status is restored from the hard-disk drive.

34 ThinkPad T30 (MT 2366, 2367)

You might also like