0% found this document useful (0 votes)
19 views2 pages

Danpoint HF 2000 Series

Uploaded by

Boy Badboy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
19 views2 pages

Danpoint HF 2000 Series

Uploaded by

Boy Badboy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Danpoint HF 2000 series

Digital Software Defined HF Radio (SDR)


TAKING HF INTO THE FUTURE OUTSTANDING FEATURES SPECIFICATIONS
The Danpoint 2000 is the essence of a rugged HF • 125 Watts programmable transmit power • Up to 1,000 channels with phonebook
radio for secure and heavy duty use in the field. calling
• Up to 1,000 Channels with phone book calling
It is the answer to your HF needs both today and • Frequency range 1.6 to 30 MHz
• Impeccable product quality with a standard • Frequency stability: 0.6 ppm
during the years to come, thanks to its advanced
3 years warranty • Sensitivity: -118dBm/10dB SINAD
software defined concept.
• Software based radio • Transmit power: 125 Watts PEP
• Frequency resolution 10 Hz
Quality • Digital signal processing for exceptional audio
• Operating temperature range from -30°
A solid metal housing and dust- and weather clarity to +60°C
proof buttons protect the advanced software • Configuration software for PC • Storage temperature range from -40° to
based electronics. No expense is spared • ALE per MIL STD 188-141B +85°C
concerning choice of materials, solutions, fittings • Humidity up to 95% @ 50°C
• Fully supports CCIR and ALE operation.
and accessories. • Modes of operation:
• Full voice interoperability with major HF brands - SSB (J3E)
Common causes of failure in harsh environments • Extended Remote head for Mobile package - PILOT (R3E)
have been analyzed, resulting in a number of - AME (H3E)
- CW (J2E)
features adding strength and durability to the
• Text messages pre-set or operator defined,
Danpoint 2000. point-to-point or point-to-multi-point
• Operating voltage 13.8 vdc ±20%,
Programmable negative ground
Inside the strong housing, the Danpoint harbors • ALE per MIL STD 188-141B
state of the art software defined electronics. • CCIR 493 4 & 6 digit selcall per
Programming can be carried out either on the interoperability agreements
radio itself or via a PC interface, allowing you to • Supports Beacon call & GPS call
update configuration of the Danpoint HF. • Size and Weight (W x H x D mm - Kg):
Mobile/Base unit, configuration:
225 x 92 x 239 - 4.1 Kg
Sound investment
Control panel:
The combination of ruggedness, advanced
188 x 72 x 61.8 - 0.5 Kg
functionalities and an outstanding warranty
makes the Danpoint 2000 the safe and
economic choice.

DMX-2018-08

Danimex Communication A/S Elholm 4 • DK-6400 Sønderborg • Denmark


Phone: +45 7342 5600 • Fax: +45 7342 5615 • danimex@danimex.com • www.danimex.com
Antenna Options
ATA FOR VEHICLE MOUNTING LB025 FOR BASE STATIONS
Mobile ATA - DMX99100 Lencom® LB025 Base antenna

FEATURES FEATURES
The Danpoint ATA kit contains: The Lencom® LB025 kit contains:

• Automatic Tuning unit (top picture) • Complete antenna assembly


• 6 ft (1.8 m) single section whip antenna • Gibbet
• Cable, 6 m • Gibbet back stay
• Spring • 60m roll rope
• Owner´s manual • Various assembly materiel
• No ATU required
The tuning unit matches the antenna
impedance to the 50 Ω output impedance of The Lencom® LB025 broadband dipole
the radio system with a nominal VSWR of not antenna has been designed for fixed station,
higher than 1.4:1 in the 1.6-30 MHz frequency multifrequency operation, and covers the
range. entire frequency range of 2-30MHz with a
power rating of 125W PEP. As supplied, this
SPECIFICATIONS antenna is suitable for installation in inverted
Frequency Band: 1.6 to 30 MHz V or horizontal configurations.
Lencom® LB025 Broadband Dipole Antenna.
Input Power Maximum: 125 W PEP SPECIFICATIONS Suitable for Inverted V and Horizontal configu-
Tuned antenna input Imp: 50 Ohm with ration
Frequency Band: 2 to 30 MHz
VSWR ≤ 1.4:1
Input Power 125 W PEP
Tuning time by algorithm: max 3 sec Maximum:
Tuning time from max 0.3 sec Nominal Impedance: 50 Ohm VSWR < 2:1
the memory on pre-
RF Connector: SO-239
programmed freq
Length: 91.86 ft. (28m)
RF power used for tuning: 6.5-7.5 W
Minimum Mast 98.42 ft. (30m)
Power supply: +12V DC at max
Spacing:
1.2А
Recommended Mast 32.8 - 49.2 ft
Dimensions, tuning unit: 530х128х114
Height: (10-15m)
mm
Wind Rating: 99.41 mph (160
Dimensions whip antenna: 6 feet (1.8 m) km/h) - no ice
Weight, tuning unit: 4.5 kg Package Weight: 15.42 lbs (7 Kg)
Weight, spring: 750 g Mounting Hardware: Halyard and pullies
Weight, antenna: 1.0 kg supplied
Operation, temperature -30° C to 50° C
range:
Storage, temperature -40° C to 85°C
range:
Humidity: Up to 95%
within -20° C
to 85° C
NVIS kit - Optional (DMX99101)

www.danpoint.com
Danpoint is a trademark of
Danimex Communication.

Danimex Communication A/S Elholm 4 • DK-6400 Sønderborg • Denmark


Phone: +45 7342 5600 • Fax: +45 7342 5615 • danimex@danimex.com • www.danimex.com

You might also like