OWNER’S MANUAL

MONITOR SIGNAGE
Please read this manual carefully before operating your set and retain it
for future reference.

MONITOR SIGNAGE MODELS

47WV50BR
47WV50MS
47WV50BS

www.lg.com
 2 TABLE OF CONTENTS

TABLE OF CONTENTS
ENGLISH
ENG

4 LICENSES 22 - Customizing Sound Options

22 Using Additional Options
22 - Adjusting Aspect Ratio
5 ASSEMBLING AND 24 - Using the Input List
PREPARING
5 Accessories 25 ENTERTAINMENT
6 Parts 25 - Connecting to a Wired Network
7 To Install in a Portrait Layout 26 - Network Status
7 Remove L-brackets before Installation 27 - Connecting USB Storage Devices
8 STORAGE METHOD FOR PANEL 28 - Browsing Files
PROTECTION 30 - Viewing Movies
8 - Correct Method 33 - Viewing Photos
8 - Incorrect Method 36 - Listening to Music
9 Installing on a Wall 38 - Viewing the Contents List
11 EXTERNAL EQUIPMENT SETUP 39 - DivX® VOD Guide
11 - IR RECEIVER 40 - Using PIP/PBP
12 Tiling Displays
12 - How to Mount the Set
13 - How to Join Sets
41 CUSTOMIZING SETTINGS
41 Accessing the Main Menus
14 REMOTE CONTROL 42 - PICTURE Settings
45 - AUDIO Settings
16 Displaying the Device Name Connected 46 - TIME Settings
to an Input Port 47 - OPTION Settings
52 Picture ID
17 USING THE MONITOR SET 53 - NETWORK Settings

17 Connecting to a PC
17 - RGB Connection 54 MAKING CONNECTIONS
18 - DVI Connection 55 Connecting to a HD Receiver, DVD,
18 - HDMI Connection Camcorder, Camera, Gaming Device, or
19 - Display Port Connection VCR Player
19 - IR Receiver Connection 55 - DVI Connection
20 Adjusting the Screen 55 - HDMI Connection
20 - Selecting an Image Mode 56 - Component Connection
20 - Customizing Image Options 56 - AV(CVBS) Connection
21 - Customizing PC Display Options 57 Connecting to the LAN
21 Adjusting the Sound 57 - LAN Connection
21 - Selecting an Sound Mode 57 Connecting to a USB
 TABLE OF CONTENTS 3

ENGLISH
ENG
58 Daisy Chain Monitors
58 - RGB Cable
58 - DVI Cable

59 TROUBLESHOOTING

62 SPECIFICATIONS

65 IR CODES

66 CONTROLLING THE MULTIPLE

PRODUCT
66 Connecting the cable
66 RS-232C Configurations
66 Communication Parameter
67 Command Reference List
69 Transmission / Receiving Protocol

NOTE

Product damage from moving or changing the installation location is not covered by warranty.
yy
The warranty will not cover any damages caused by using the product in an excessively dusty
yy
environment.
 4 LICENSES

LICENSES
ENGLISH

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274

Manufactured under license from Dolby Laboratories. Dolby and the

double-D symbol are trademarks of Dolby Laboratories.
 ASSEMBLING AND PREPARING 5

ASSEMBLING AND PREPARING

ENGLISH
ENG
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.

CD (Owner's Manual, Power Cord IR Receiver DVI Cable

SuperSign Elite-c Program/
SuperSign Manual) / Cards
(*SuperSign Elite-w : It may not be
supported depending on the model.)

Power Cable Holder RS-232C Cable Short Vertical Long Horizontal

Tiling Guide(2 ea) Tiling Guide(2 ea)

Remote Control M4 x 8L M6 Mounting Cable Tie (2 ea)

and Batteries Screws (8 ea) Screws (4 ea) (For Cable Arrangement)

CAUTION

Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy

NOTE

The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
 6 ASSEMBLING AND PREPARING

Parts
ENGLISH

< 47WV50BR / 47WV50MS >

ENG

USB DP DVI IN DVI OUT

RGB
/COMPONENT OUT AUDIO LAN COMPOSITE SPEAKER
/DVI IN

RGB
/COMPONENT IN

REMOTE
CONTROL IN

Connection panel

< 47WV50BS >

USB DP DVI IN DVI OUT

RGB
/COMPONENT OUT AUDIO LAN SPEAKER
/DVI IN

RGB
/COMPONENT IN

REMOTE
CONTROL IN

Connection panel
 ASSEMBLING AND PREPARING 7

To Install in a Portrait Layout

ENGLISH
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).

ENG
Remove L-brackets before Installation
Remove the L-brackets from each corner of the monitor before installing it.

NOTE

Keep the removed L-brackets and use them when moving the monitor later.
yy
 8 ASSEMBLING AND PREPARING

STORAGE METHOD FOR PANEL PROTECTION

ENGLISH
ENG

Correct Method Incorrect Method

Panel

Panel

If the product needs to be set upright, hold both

sides of the product, and tilt backward carefully
for. Do not let the panel not to touch the floor. If the product is tilted onto the bezel, the bottom of
the panel may be damaged.

Panel Cushion

Panel

When laying down the product, lay a cushion on a

flat floor. Put the product on it with the panel of
the product facing down.

Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.

If there is not a cushion available, ensure the floor

is clean and then lay the product down carefully
with the panel facing either upward or downward.
At this time, be careful for objects not to fall on the
panel.
 ASSEMBLING AND PREPARING 9

Installing on a Wall CAUTION

ENGLISH
Disconnect the power cord first, and then
yy

ENG
To install the Monitor on a wall (optional), move or install the monitor set. Otherwise
use the VESA screws provided as accessories to electric shock may occur.
fasten it. If you install the monitor set on a ceiling or
yy
Please refer to page 12 on How to Mount the Set. slanted wall, it may fall and result in severe
injury.
Do not over tighten the screws as this may
yy
cause damage to the monitor set and void
your warranty.
10 cm
20 cm
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
10 cm 10 cm are not covered by the warranty.
To prevent injury, this apparatus must be
yy
securely attached to the wall in accordance
10 cm
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)

Install the monitor at least 10 cm away from the

wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.

NOTE

Do not install the product in a place with

no ventilation (e.g., on a bookshelf or in a
closet) or on a carpet or cushion. If there is
no other option but to mount the product on
the wall, make sure that sufficient ventilation
is provided before installation.
- Failure to do so may result in a fire due to
the increase in the internal temperature.
 10 ASSEMBLING AND PREPARING

Securing the product to a wall (optional)

WARNING
(Depending on model)
ENGLISH

If a product is not positioned in a sufficiently

yy
ENG

stable location, it can be potentially

hazardous due to falling. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
»» Using cabinets or stands recommended
by the manufacturer of the product.
»» Only using furniture that can safely
support the product.
»» Ensuring the product is not overhanging
the edge of the supporting furniture.
»» Not placing the product on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the product to a suitable support.
»» Not standing the product on cloth or other
materials placed between the product
and supporting furniture.
»» Educating children about the dangers of
1 Insert and tighten the eye-bolts, or product climbing on furniture to reach the product
brackets and bolts on the back of the product. or its controls.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the product.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.

CAUTION

Make sure that children do not climb on or

yy
hang on the product.

NOTE

Use a platform or cabinet that is strong and

yy
large enough to support the product securely.
Brackets, bolts, and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
 ASSEMBLING AND PREPARING 11

EXTERNAL EQUIPMENT SETUP

ENGLISH
ENG
IR RECEIVER

This allows a remote control sensor to be placed

in a custom location. Then that display can control
other displays via an RS-232C cable.

AUDIO
IN

REMOTE
CONTROL IN
 12 ASSEMBLING AND PREPARING

Tiling Displays
ENGLISH
ENG

How to Mount the Set

Example of 2 x 2 Tiling

Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.

Screws for attaching the

VESA wall mount

<Rear view of the set with the wall mount plate>

 ASSEMBLING AND PREPARING 13

How to Join Sets

ENGLISH
ENG
1 Join other sets using screws for fixing the VESA wall mount in the same way as above.

Set 4 joined to the rest of the sets

(2 x 2 tiling)

2 After joining the sets, use the tiling guide to adjust the gap between the sets.

3 Now the 2 x 2 tiling is complete.

You can tile in various combinations, such as 3 x 3.

NOTE

The load applied to each set should be supported by the wall mount plate or the wall using a VESA
yy
wall mount (600 x 400).
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
yy
(Each set must be firmly mounted to the wall mount plate or the wall.)
You may mount the set without using the tiling guide; this does not affect the performance of the
yy
device.
Loosen the screws on the set to install the tiling guides. (The screws are enclosed with the other
yy
components in the box, including the tiling guides.)
 14 REMOTE CONTROL

REMOTE CONTROL
ENGLISH
ENG

The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this

yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the monitor set.

(POWER) ENERGY SAVING( )

Turns the monitor set on or off. Adjusts the brightness of
the screen to reduce energy
consumption.
MONITOR ON
Turn on the monitor.
MONITOR OFF INPUT
Turn off the monitor. Selects the input mode.

1/a/A Button 3D
Toggles between numerical This button does not apply to
and alphabetical. this model.

Number and Alphabet Buttons

Enters numerical or alphabetical
ARC characters depending on the
Selects the Aspect Ratio setting.
Mode.

Volume Up / Down
Adjusts the volume level. CLEAR
Deletes the entered numerical
or alphabetical character.
PSM
Selects the Picture Status
Mode.
BRIGHTNESS Key
MUTE Adjust the brightness by
Mutes all sounds. pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.

BACK TILE EXIT

ID

ON OFF
 REMOTE CONTROL 15

ENGLISH
ENG
INFO ⓘ AUTO
Displays the input Automatically adjusts picture
information. position and minimizes image
instability.(RGB input only)

SETTINGS
Accesses the main menus W.BAL
or saves your input and exit Enters the White Balance
menus. menu.

S.MENU
(SuperSign Menu Key)
OK This button does not apply to
Selects menus or options and this model.
confirms your input.
Navigation Buttons
Scrolls through menus or
options.

BACK EXIT
Allows the user to move back Clears all on-screen displays
one step in user interaction and returns to Monitor set
function. viewing from any menu.

This button selection is not TILE

applicable. Selects the TILE Mode.

ID ON/OFF USB Menu control buttons

When the number of Picture Controls media playback.
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
 16 REMOTE CONTROL

Displaying the Device Name Connected to an Input Port

ENGLISH
ENG

Display which devices are connected to which

external input ports.
NOTE

External inputs supported: HDMI, DVI-D,

yy
1 Access the Input list screen and press the blue Display Port
(input label) button on the remote control. Labels available: PC, DTV
yy
The input labels are displayed on the Input
yy
Label screen or at the top left of the screen
when you change the external input setting.
For DTV/PC-compatible signals, such as
yy
1080p 60 Hz, the screen settings may
change according to the input label. The Just
Scan option is available if a PC is connected
as an external device.

2 You can assign an input label for every input

except USB.

Input Label

HDMI

DVI-D

Display Port

Close
 USING THE MONITOR SET 17

USING THE MONITOR SET

ENGLISH
ENG
Connecting to a PC RGB Connection
Your Monitor set supports the Plug & Play* feature. Transmits the analog video signal from your PC to
the monitor set. Connect the PC and the Monitor
* Plug & Play: A PC will have a built-in driver for set with the 15-pin signal cable as shown the
the monitor, no extra software is needed. following illustrations.
Select RGB input.

Back of the product.

RGB
/COMPONENT OUT
AUDIO
IN

NOTE RGB
/COMPONENT IN

REMOTE
CONTROL IN

It is recommended to use the monitor set

yy Macintosh Adapter
with the HDMI connection for the best image (not included)
quality.
To comply with the specifications of the
yy
product, use a shielded interface cable with
(not
ferrite core, such as a D-sub 15-pin cable included)
and DVI/HDMI cable.
If you turn the monitor set on when the set
yy (not included)
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.

PC/MAC PC

CAUTION

Connect the signal

yy
input cable and tighten
it by turning the screws NOTE
clockwise. yyU se the standard Macintosh
adapter since an incompatible
Do not press the screen with your finger for
yy adapter is available in the
a long time as this may result in temporary market. (Different signaling
distortion on the screen. system)
Avoid displaying a fixed image on the
yy Apple computers may require an adapter to
yy
screen for a long period of time to prevent connect to this monitor. Call or visit their web
image burn. Use a screensaver if possible. site for more information.
 18 USING THE MONITOR SET

DVI Connection HDMI Connection

ENGLISH

Transmits digital video signal from your PC to Transmits digital video and audio signals from your
ENG

the monitor set. Connect the PC and the monitor PC to the monitor set. Connect the PC and the
set with the DVI cable as shown the following monitor set with the HDMI cable as shown in the
illustrations. following illustrations.
Select DVI input. Select HDMI input.

Back of the product. Back of the product.

DVI IN AUDIO
AUDIO DVI IN AUDIO IN
IN IN
/DVI
IN DP
/DVI
IN DP

REMOTE AUDIO
REMOTE REMOTE CONTROL IN
IN
CONTROL IN CONTROL IN

REMOTE
CONTROL IN

(not included)

(not included)

PC
PC PC

NOTE

Use a High Speed HDMI™ Cable.

yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode.
Some PCs require you to manually change
the default audio output to HDMI.
If you want to use HDMI-PC mode, you
yy
must set the input label to PC mode.
When HDMI PC is used, a compatiblity
yy
problem could occur.
 USING THE MONITOR SET 19

Display Port Connection IR Receiver Connection

ENGLISH
Transmits digital video and audio signals from Allows the use of IR receiver extension.

ENG
your PC to the Monitor. Connect the PC and the
Monitor with the Display Port cable as shown in
the following illustrations.
Select Display Port input source.

/DVI
IN DP
Back of the product. Back of the product.
/DVI
IN DP AUDIO
E IN

AUDIO
IN

REMOTE
CONTROL IN
REMOTE
CONTROL IN

(not included)

PC

NOTE

Sound may not be available depending on

yy
the DP version of your PC.
 20 USING THE MONITOR SET

Adjusting the Screen Customizing Image Options

Customize basic and advanced options of each
ENGLISH

Selecting an Image Mode

ENG

image mode for the best screen performance.

Display images in its optimized settings by 1 Press SETTINGS to access the main menus.
selecting one of the preset image modes.
2 Press the navigation buttons to scroll to
1 Press SETTINGS to access the main menus. PICTURE and press OK.
2 Press the navigation buttons to scroll to
3 Press the navigation buttons to scroll to
PICTURE and press OK.
Picture Mode and press OK.
3 Press the navigation buttons to scroll to
4 Press the navigation buttons to scroll to an
Picture Mode and press OK.
image mode you want and press OK.
4 Press the navigation buttons to scroll to an
5 Select and adjust following options, and then
image mode you want and press OK.
press OK.

Mode Description
Option Description
Vivid Adjusts the video image for the retail
Backlight  djusts the brightness of the screen
A
environment by enhancing the contrast,
by controlling the LCD backlight. If
brightness, color, and sharpness.
you decrease the brightness level,
Standard Adjusts the image for the normal the screen becomes darker and the
environment. power consumption will be reduced
Cinema Optimizes the video image for a cinematic without any video signal loss.
look to enjoy movies as if you are in a Contrast Increases or decreases the gradient
movie theater. of the video signal. You may use
Sport Optimizes the video image for high and Contrast when the bright part of the
dynamic actions by emphasizing primary picture is saturated.
colors such as white, grass, or sky blue. Brightness Adjusts the base level of the signal in
Game Optimizes the video image for a fast the picture. You may use Brightness
gaming screen such as PCs or games. when the dark part of the picture is
saturated.
Sharpness Adjusts the level of crispness in the
5 When you are finished, press EXIT.
edges between the light and dark
When you return to the previous menu, press areas of the picture. The lower the
BACK. level, the softer the image.
Color Adjusts intensity of all colors.
Tint Adjusts the balance between red and
green levels.
Color Temp. Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced Customizes the advanced options.
Control Refer to the Advanced image options.
Picture Reset Restores the options to the default
setting.

6 When you are finished, press EXIT.

When you return to the previous menu, press
BACK.
 USING THE MONITOR SET 21

Customizing PC Display Options Adjusting the Sound

Customize options of each image mode for the
Selecting an Sound Mode

ENGLISH
ENG
best image quality.
yyThis function works in the following mode: Play the sound in its optimized settings by
RGB [PC] mode. selecting one of the preset sound modes.

1 Press SETTINGS to access the main menus. 1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to 2 Press the navigation buttons to scroll to AUDIO
PICTURE and press OK. and press OK.

3 Press the navigation buttons to scroll to Screen 3 Press the navigation buttons to scroll to Sound
and press OK. Mode and press OK.

4 Select and adjust following options, and then 4 Press the navigation buttons to scroll to a
press OK. sound mode you want and press OK.

Option Description Mode Description

Resolution Selects a proper resolution. Standard Select when you want standard-quality
Auto Sets to adjust the screen position, clock, sound.
Config. and phase automatically. The displayed Music Select when you listen to music.
image may be unstable for a few seconds Cinema Select when you watch movies.
while the configuration is in progress. Sports Select when you watch sports events.
Position/ Adjusts the options when the picture is Game Select when you play games.
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset Restores the options to the default 5 When you are finished, press EXIT.
setting. When you return to the previous menu, press
BACK.

5 When you are finished, press EXIT.

When you return to the previous menu, press
BACK.
 22 USING THE MONITOR SET

Customizing Sound Options Using Additional Options

Customize options of each sound mode for the
ENGLISH

Adjusting Aspect Ratio

ENG

best sound quality.

1 Press SETTINGS to access the main menus. Resize the image to view the image at its optimal
size by pressing ARC while you are watching
2 Press the navigation buttons to scroll to AUDIO Monitor set.
and press OK.

3 Press the navigation buttons to scroll to Sound

Mode and press OK. CAUTION

4 Press the navigation buttons to scroll to a If a fixed image displays on the screen for a
yy
sound mode you want and press OK. long period of time, it could be imprinted and
become a permanent disfigurement on the
5 Select and adjust following options, and then screen. This is image burn or burn-in and not
press OK. covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
Option Description period of time, image burn may occur on the
Infinite LG's Infinity Sound option provides 5.1 letterboxed area of the screen.
Sound channel stereo sound quality from two
speakers.
Treble Increases the intensity of the high
frequency part of audio.
NOTE
Bass Increases the intensity of the low
frequency part of audio. You can also change the image size by
yy
Reset Resets the sound mode to the default accessing the main menus.
setting. 47WV50BS is not supporting composite(AV)
yy
signal & input.

6 When you are finished, press EXIT.

When you return to the previous menu, press
BACK.
MODE Display
RGB DVI-D HDMI
AV Component Port

ARC PC DTV PC DTV PC DTV PC

16:9 o o o o o o o o o

Just Scan x o x o x o x o x

1:1 x x o x o x o x o

4:3 o o o o o o o o o

Zoom o o x o x o x o x

Cinema o o x o x o x o x
Zoom
 USING THE MONITOR SET 23

- 16:9 : This selection will allow you to adjust the - 4:3 : This selection will allow you to view a
picture horizontally, in linear proportion, to fill the picture with an original 4:3 aspect ratio, black

ENGLISH
entire screen(useful for viewing 4:3 formatted bars will appear on both the left and right of the

ENG
DVDs). screen.

- Just Scan : This Selection will allow you view - Zoom : This selection will allow you to view the
the picture of best quality without loss of original picture without any alteration, while filling the
picture in high resolution image. Note: If there is entire screen. However, the top and bottom of
noise in original Picture, You can see the noise the picture will be cropped.
at the edge.

Just Scan

- 1:1 : The aspect ratio is not adjusted from the - Cinema Zoom : Choose Cinema Zoom when
original. (Only Display Port PC, HDMI PC, you want to enlarge the picture in correct
DVI-D PC, RGB PC) proportion.
Note: When enlarging or reducing the picture,
the image may become distorted.
 24 USING THE MONITOR SET

Using the Input List

ENGLISH

Selecting an Input Source

ENG

1 Press INPUT to access the input source list.

2 Press the navigation buttons to scroll to one of
the input sources and press OK.

Input source Description

AV Watch video from a VCR or other
external devices.
Component Watch the content from a DVD or
other external devices, or through a
digital set-top box.
RGB View a PC display on the screen.
DVI-D View a PC display on the screen.
HDMI Watch contents from a PC, DVD
of Digital set-top box other high
definition devices.
Display Port Watch contents in a PC, DVD
of Digital set-top box other high
definition devices.
USB Plays the multimedia file saved in
the USB.

NOTE

47WV50BS is not supporting composite(AV)

yy
signal & input.
 ENTERTAINMENT 25

ENTERTAINMENT

ENGLISH
ENG
Connecting to a Wired Network To set up the network settings: (Even if your dis-
play has already connected automatically, running
Connect the display to a local area network (LAN) setup again will not harm anything),
via the LAN port as shown on the following illustra- 1 Press SETTINGS to access the main menus.
tion and set up the network settings.
Only supports wired network connection. 2 Press the navigation buttons to scroll to NET-
After making a physical connection, a small WORK and press OK.
number of networks may require the display net- 3 Press the navigation buttons to select Network
work settings to be adjusted. For most networks, Setting and press OK.
the display will connect to automatically without
any adjustments. 4 If you already set Network Setting, select
For detail information, contact your internet pro- Resetting. The new connection settings resets
vider or router manual. the current network settings.

5 Select IP Auto Setting or IP Manual Setting.

- If selecting IP Manual Setting, press the
LAN
navigation and number buttons. IP addresses
will need to be input manually.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
Router If you’re using a broadband router or broad-
LAN WAN
Router
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-

@
mined.
6 When you are finished, press EXIT.
Cable modem ETHERNET
Cable modem

Internet
Internet

CAUTION CAUTION

Do not connect a modular phone cable to

yy Network setting menu will not be avail-
yy
the LAN port. able until the display connected to physical
Since there are various connection meth-
yy network.
ods, please follow the specifications of your Since there are various connection meth-
yy
telecommunication carrier or internet service ods, please follow the specifications of your
provider. telecommunication carrier or internet service
provider.
 26 ENTERTAINMENT

NOTE A DSL modem is required to use DSL service

yy
and a cable modem is required to use cable
If you want to access the Internet directly on
ENGLISH

yy modem service. Depending on the access

ENG

your display, the Internet connection should method of and subscriber agreement with your
always be on. ISP, you may not be able to use the internet
If you cannot access the Internet, check
yy connection feature contained in this display or
the network conditions from a PC on your you may be limited to the number of devices
network. you can connect at the same time. (If your ISP
When you use Network Setting, check the
yy limits sub-scription to one device, this display
LAN cable or check if DHCP in the router is may not be allowed to connect when a PC is
turned on. already connected.)
If you do not complete the network settings,
yy The use of a “Router” may not be allowed or its
yy
the network may not work properly. usage may be limited depending on the poli-
cies and restrictions of your ISP. For details,
contact your ISP directly.
Tips for Network Setting
Use a standard LAN cable with this display.
yy
Cat5 or better with a RJ45 connector.
Many network connection problems during set
yy
up can often be fixed by re-setting the router
or modem. After connecting the display to the
network, quickly power off and/or disconnect
the power cable of the network router or cable
modem. Then power on and/or connect the
power cable again. Network Status
Depending on the Internet service provider
yy
(ISP), the number of devices that can receive 1 Press SETTINGS to access the main menus.
Internet service may be limited by the applica-
ble terms of service. For details, contact your
2 Press the navigation buttons to scroll to
NETWORK and press OK.
ISP.
LG is not responsible for any malfunction of the
yy 3 Press the navigation buttons to select
display and/or the Internet connection feature Network Status.
due to communication errors/malfunctions as-
sociated with your Internet connection, or other 4 Press OK to check the network status.
connected equipment. 5 When you are finished, press EXIT.
LG is not responsible for problems within your
yy
internet connection.
You may experience undesired results if the
yy
network connection speed does not meet the
requirements of the content being accessed. Option Description
Some internet connection operations may not
yy Setting Return to the network setting menu.
be possible due to certain restrictions set by Test the current network status after set-
Test
the Internet service provider (ISP) supplying ting the network.
your Internet connection. Close Return to the previous menu.
Any fees charged by an ISP including, without
yy
limitation, connection charges are your respon-
sibility.
A 10 Base-T or 100 Base-TX LAN port is
yy
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
 ENTERTAINMENT 27

Connecting USB Storage Devices Tips for Using USB Storage Devices

Only a USB storage device is recognizable.

yy

ENGLISH
Connect USB storage devices such as a USB

ENG
flash memory, external hard drive to the display If the USB storage device is connected
yy
and use multimedia features (See "Browsing files" through a USB hub, the device is not recog-
on page 28). nizable.
Connect a USB flash memory or USB memory
A USB storage device using an automatic
yy
card reader to the Display as shown on the follow-
ing illustration. The My media screen appears. recognition programme may not be recog-
nized.
A USB storage device which uses its own
yy
driver may not be recognized.
The recognition speed of a USB storage
yy
or device may depend on each device.
Please do not turn off the display or unplug
yy
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
Please do not connect the USB storage
yy
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
Please use only a USB storage device which
yy
was formatted as a FAT32 file system, NTFS
CAUTION
file system provided with the Windows op-
Do not turn the display off or remove a USB
yy erating system. In case of a storage device
storage device while EMF (my media) Menu formatted as a different utility program which
is activated, as this could result in loss of
is not supported by Windows, it may not be
files or damage to the USB storage device.
Back up your files saved on a USB storage
yy recognized.
device frequently, as you may lose or dam- Please connect power to a USB storage de-
yy
age the files and this may be not covered by vice (over 0.5 A) which requires an external
the warranty. power supply. If not, the device may not be
recognized.
Please connect a USB storage device with
yy
the cable offered by the device maker.
Some USB storage devices may not be sup-
yy
ported or operated smoothly.
File alignment method of USB storage
yy
device is similar to Window XP and filename
can recognize up to 100 English characters.
 28 ENTERTAINMENT

Be sure to back up important files since data

yy
Browsing Files
stored in a USB memory device may be
ENGLISH

damaged. We will not be responsible for any Access the photo, music, or movie lists and browse
ENG

files.
data loss.
If the USB HDD does not have an external
yy 1 Connect a USB storage device.
power source, the USB device may not be 2 Press SETTINGS to access the main menus.
detected. So be sure to connect the external
3 Press the navigation buttons to scroll to My
power source. Media and press OK.
- Please use a power adaptor for an external
power source. We do not guarantee an USB 4 Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
cable for an external power source.
Contents List and press OK. (The function of
If your USB memory device has multiple
yy
Contents List may not be supported depending
partitions, or if you use a USB multi-card
on the model.)
reader, you can use up to 4 partitions or USB
memory devices.
If a USB memory device is connected to a
yy
Movie List Photo List Music List Contents List
USB multi-card reader, its volume data may
not be detected. 1 2

If the USB memory device does not work

yy Page 1/1
Photo List
properly, disconnect and reconnect it. USB External Drive1 Page 1/1
4
How fast a USB memory device is detected
yy
001 002 003 004 005 006 007 008 009
differs from device to device. 5

If the USB is connected in Standby Mode,

yy 010 011 012 013 014 015

specific hard disk will automatically be

loaded when the display is turned on. Move View P Page Change

To Music List Change Numbers Mark Mode Exit

The recommended capacity is 1 TB or less

yy
for a USB external hard disk and 32 GB or 3

less for USB memory.

Any device with more than the recommended
yy No. Description

capacity may not work properly. 1 Moves to upper level folder

If a USB external hard disk with a “Energy

yy 2 Current page/Total pages
Saving” function does not work, turn the Corresponding buttons on the
3
remote control
hard disk off and on again to make it work
Current page/ total pages of contents under
properly. 4
the folder focused on 1
USB storage devices below USB 2.0 are
yy 5 Contents under the folder focused on 1
supported as well. But they may not work Button Description
properly in the movie list. Press the green button to toggle between
Maximum of 999 folders or files can be rec-
yy Green Photo List -> Music List, Music List ->
button Contents List, Contents List -> Movie List
ognized under one folder. or Movie List -> Photo List.
A USB 3.0 storage device may not work.
yy Yellow A method to view in 5 large thumbnail or
button simple list.
Blue
Convert to Mark Mode.
button
 ENTERTAINMENT 29

Supported File Format

ENGLISH
Type Supported file format

ENG
Movie DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Video format : DivX 3.11, DivX4, DivX5. DivX6
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
Photo JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form
of predefined icon.
File
Item Profile
Extensions
jpeg supported SOF0: baseline
jpg file format SOF1: Extend
jpe Sequential
SOF2:
Progressive
photo size Min: 64 x 64
Max-Normal
Type:
15360 (W) x
8640 (H)
Progressive
Type:
1920 (W) x 1440
(H)
Music MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
yy Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
 30 ENTERTAINMENT

Viewing Movies 5 Play a movie.

ENGLISH

Play video files on display. Your display shows all

NOTE
ENG

of the video files saved in a USB storage device or

shared folder on a PC. Non-supported files are displayed the preview
yy
image by icon only .
1 Press the navigation buttons to scroll to My Abnormal files are displayed in the form of
yy
bitmap .
Media and press OK.

2 Press the navigation buttons to scroll to Movie

List and press OK.

3 Press the navigation buttons to scroll to a 6 Control playback by using the following buttons.
folder you want and press OK.

4 Press the navigation buttons to scroll to a file

you want and press OK.

Page 1/1 01:02:30 / 02:30:25

Movie List MENU Option Hide Exit

USB1 USB Drive Drive1 Page 1/1

001 002 003 004

005 006

Button Description
Stops the playback
Move Play P Page Change

To Photo list Change Numbers Mark Mode Exit

Plays a video
Pauses or resumes the playback
Movie List
Page 1/1
Scans backward in a file
Mark Mode
USB1 USB Drive Drive1 Page 1/1 Scans forward in a file
001 002 003 004 SETTINGS Show the Option menu.
051. Apple_ ......
Hide the menu on the full-sized screen.
005 006
02:30:25

BACK
EXIT Return to Movie List.
Skips to specific points in a file dur-
Move Mark P Page Change ing playback. The time of a specific
Play Marked Mark All Unmark All Exit Mark Mode Exit
or point will appear on the status bar. In
some files, this function may not work
properly.
Press the ENERGY SAVING button
Menu Description ENERGY
repeatedly to increase the brightness
Play Marked Play the selected movie file. SAVING
Once a movie file finishes playing, of your screen.
the next selected one will be played
automatically.
Mark All Mark all movie files on the screen.

Unmark All Deselect all marked movie files.

Exit Mark Exit the Mark Mode.

Mode
 ENTERTAINMENT 31

Tips for Using Playing Video Files Video Options

Some user-created subtitles may not work
yy 1 Press SETTINGS to access the Pop-Up

ENGLISH
menus.

ENG
properly.
Some special characters are not supported
yy
2 Press the navigation buttons to scroll to Set
in subtitles.
Video Play., Set Video. or Set Audio. and
HTML tags are not supported in subtitles.
yy
press OK.
Subtitles in languages other than the sup-
yy
ported languages are not available.
The screen may suffer temporary interrup-
yy NOTE
tions (image stoppage, faster playback, etc.)
when the audio language is changed. Option values changed in Movie List does
yy
A damaged movie file may not be played
yy not affect Photo List and Music List.
Option value changed in Photo List and Mu-
yy
correctly, or some player functions may not
sic List are changed likewise in Photo List
be usable.
and Music List excluding Movie List.
Movie files produced with some encoders
yy
When replaying the video file after stopping,
yy
may not be played correctly. you can play from where it stopped previ-
If the video and audio structure of recorded
yy ously.
file is not interleaved, either video or audio is
outputted.
Videos with resolutions higher than
yy
1920X1080@25/30P may not work properly
depending on the frame.
Movie files other than the specified types and
yy
formats may not work properly.
Max bitrate of playable movie file is 20 Mbps.
yy
(only, Motion JPEG : 10 Mbps)
We do not guarantee smooth playback of
yy
profiles encoded level 4.1 or higher in H.264/
AVC.
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
yy
not supported for playback.
A DivX movie file and its subtitle file must be
yy
located in the same folder.
A video file name and its subtitle file name
yy
must be identical for it to be displayed.
Playing a video via a USB connection that
yy
doesn’t support high speed may not work
properly.
Files encoded with GMC(Global Motion
yy
Compensation) may not be played.
 32 ENTERTAINMENT

When you select the Set Video Play, Code Page Support Language
Latin1 English, Spanish, French,
1 Press the navigation buttons to scroll to show
ENGLISH

German, Italian, Portuguese,

the Picture Size, Audio Language, Subtitle
ENG

Danish, Romanian, Norwegian,

Language, or Repeat.
Albanian, Gaelic, Welsh, Irish,
2 Press the navigation buttons to scroll to make Catalan,Valencian
appropriate adjustments. Latin2 Bosnian, Polish, Croatian, Czech,
Slovak, Slovenian, Serbian,
Hungarian

Latin4 Estonian, Latvian, Lithuanian

Cyrillic Bulgarian, Macedonian, Russian,
Menu Description Ukrainian, Kazakh
Picture Size Selects your desired picture Greek Greek
format during movie play. Turkish Turkish
Audio Changes the Language Group of the Korean Korean
Language audio during movie play. Files
with a single audio track cannot be
selected.
Subtitle Turn on/off the subtitle.
Language
Language Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page Can select the font for subtitle. NOTE
When set to default, same font as
general menu will be used. Only 10,000 of sync blocks can be supported
yy
Sync Adjusts the time synchronisation of within the subtitle file.
the subtitle from -10 secs to +10 secs When playing a video, you can adjust the
yy
by steps of 0.5 secs during movie Picture Size by pressing the ARC button.
play. Subtitles in your language are only sup-
yy
Position Changes the position of the ported when the OSD menu is also in this
subtitle either up or down during language.
movie play. The code page options may be disabled de-
yy
Size Selects your desired Subtitle size pending on the language of the subtitle files.
during movie play. Select the appropriate code page for the
yy
Repeat Turn on/off repeat function of subtitle files.
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
 ENTERTAINMENT 33

When you select the Set Video, Photo List

Page 1/1

USB1 USB Drive Drive1

1 Press the navigation buttons to scroll to make

Page 1/1

ENGLISH
ENG
appropriate adjustments. 001 002 003 004 005 006 007 008 009

010 011 012 013 014 015

When you select the Set Audio, Move View P Page Change

To Music List Change Numbers Mark Mode Exit

1 Press the navigation buttons to scroll to show

Page 1/1

the Sound Mode, Clear Voice II or Balance. Photo List

Mark Mode
USB1 USB Drive Drive1 Page 1/1

2 Press the navigation buttons to scroll to make

001 002 003 004 005 006 007 008 009
appropriate adjustments.
010 011 012 013 014 015

Move Mark P Page Change

View Marked Mark All Unmark All Exit Mark Mode Exit

Viewing Photos
View image files saved in a USB storage device.
Menu Description
The displays on the screen may differ from the
model. View Marked Display the selected photo file.

1 Press the navigation buttons to scroll to My Mark All Mark all photo files on the screen.
Media and press OK.
Unmark All Deselect all marked photo files.
2 Press the navigation buttons to scroll to Photo
Exit Mark Mode Exit the Mark Mode.
List and press OK.

3 Press the navigation buttons to scroll to a

5 View photos.
folder you want and press OK.

4 Press the navigation buttons to scroll to a file

you want and press OK.
NOTE

Non-supported files are displayed the pre-

yy
view image by icon only .
Abnormal files are displayed in the form of
yy
bitmap .
 34 ENTERTAINMENT

Using Photo Options Option Description

ENERGY Press the ENERGY SAVING button
ENGLISH

Use the following options while viewing photos. SAVING repeatedly to change the brightness of
ENG

your screen.

yy Slide Speed: Selects a slideshow

speed (Fast, Medium, Slow).
yy TransitionEffect: Set the view mode
of the slideshow.
yy BGM: Selects a music folder for the
background music.

NOTE
yyYou cannot change the music
2/13 folder while the background
Slideshow BGM MENU Option Hide Exit music is playing.
yyYou can only select the MP3
folder saved on the device that
Options Number of selected photos
currently displays the photo.

Hides the option window.

Option Description To display the options, press OK.
Slideshow Starts or stops a slideshow with selected Return to Photo List.
photos.
If there are no selected photos, all pho-
tos saved in the current folder display
during a slideshow.
To set a slideshow speed, select Op-
tion. Photo options
BGM Turns the background music on or off.
To set the background music folder, 1 Press SETTINGS to show the Option menus.
select Option.
You can adjust Option by SETTINGS 2 Press the navigation buttons to scroll to Set
button on the remote control. Photo View, Set Video, or Set Audio and
press OK.
Rotates photos clockwise (90°, 180°,
270°, 360°).

NOTE
NOTE
yyThe supported photo size is
limited. You cannot rotate a Option values changed in Movie List does
yy
photo if the resolution of the not affect Photo List and Music List.
rotated width is larger than the
Option value changed in Photo List and Mu-
yy
supported resolution size.
sic List are changed likewise in Photo List
View the photo by zoom in 2, 4 times. and Music List excluding Movie List.

NOTE
yyPhotos with a resolution of
960x540 or less cannot be
enlarged.
 ENTERTAINMENT 35

When you select the Set Photo View,

1 Press the navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.

ENGLISH
ENG
2 Press the navigation buttons to scroll to make appropriate adjustments.

Transition Effect Option

Option Description
Sliding Pushes the current slide out of view as it plays to the next slide.

Stairs Pushes the current slide in a staircase shape as it plays to the next slide.

Door Open Pushes the current slide like opening or closing the door as it plays to the next slide.
/Close

Shutter Pushes the current slide like drawing or pulling down the blind as it plays to the next slide.

Fade In Fades the slide out slowly before playing to the next slide.
 36 ENTERTAINMENT

When you select the Set Video, Listening to Music

1 Press the navigation buttons to scroll to make
ENGLISH
ENG

appropriate adjustments.
1 Press the navigation buttons to scroll to My Me-
dia and press OK.

2 Press the navigation buttons to scroll to Music

List and press OK.
When you select the Set Audio,
3 Press the navigation buttons to scroll to a folder
1 Press the navigation buttons to scroll to show you want and press OK.
the Sound Mode, Clear Voice II or Balance.
4 Press the navigation buttons to scroll to a file
2 Press the navigation buttons to scroll to make you want and press OK.
appropriate adjustments.

Page 1/1
Music List
USB1 USB Drive Drive1 Page 1/1

001. - B01.mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3

00:00 00:00 00:00 00:00

005. - B05.mp3
00:00

Move Play P Page Change

To Movie List Change Numbers Mark Mode Exit

Page 1/1
Music List
Mark Mode

USB1 USB Drive Drive1 Page 1/1

001. - B01.mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3

00:00 00:00 00:00 00:00

005. - B05.mp3
00:00

Move Mark P Page Change

Play Marked Mark All Unmark All Exit Mark Mode Exit

Menu Description

Play Marked Display the selected music file.

Mark All Mark all music files on the screen.

Unmark All Deselect all marked music files.

Exit Mark Mode Exit the Mark Mode.

5 Play music.
 ENTERTAINMENT 37

6 Control playback by using the following buttons. Tips for playing music files
This unit cannot support the ID3 Tag
yy

ENGLISH
Page 1/1
embedded MP3 files.

ENG
Music List
3 file(s) Marked
Drive1 Page 1/1

004. - B04.mp3 005. - B05.mp3 006. - B06.mp3 007. - B07.mp3 008. - B08.mp3
NOTE
00:00 00:00 00:00 00:00 00:00

005. - B05.mp3 02:30 / 03:25

Play with Photo MENU Option Hide Exit Non-supported files are displayed the pre-
yy
view image by icon only .
Abnormal files are displayed in the form of
yy
Button Description bitmap .
Stops playing back the file and moves A damaged or corrupted music does not play
yy
back to the music list. but displays 00:00 in playtime.
Plays a music file A music downloaded from a paid service with
yy
Pauses or resumes playback copyright protection does not start but dis-
Skips to the next file plays inappropriate information in playtime.
Skips to the previous file If you press OK,
yy buttons, screen saver is
or When playing, stopped.
When you press the v button, the previ- The PLAY( ), Pause( ),
yy , , buttons
ous music file will be played. on the remote control are also available in
When you press the w button, the next
this mode.
music file will be played.
Green Start playing the selected music files and
You can use the
yy button to select the next
button then move to the Photo List. music and the button to select the previ-
ENERGY Press the ENERGY SAVING button re- ous music.
SAVING peatedly to change the brightness of
your screen. file name
Show the Option menu.
Hides the option window. 002. B02.mp3
To display the options, press OK. 00:31 / 04:04
When you press the EXIT button while
the Music player is displayed, only the
Time elapsed /Duration
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
◄ or ► When using the < or > button during
playback a cursor indicating the position
can be played.
 38 ENTERTAINMENT

Music Options Viewing the Contents List

1 Press SETTINGS to access the Pop-Up men-
ENGLISH

Plays back the stored files using the Export option

ENG

us. in SuperSign Manager.

2 Press the navigation buttons to scroll to Set Au- 1 Press the Navigation buttons to scroll to My
dio Play or Set Audio and press OK. Media and press OK.

NOTE 2 Press the Navigation buttons to scroll to Con-

tents List and press OK.
Option values changed in Movie List does
yy
not affect Photo List and Music List. 3 Press the Navigation buttons to scroll to a
Option value changed in Photo List and Mu-
yy
folder you want and press OK.
sic List are changed likewise in Photo List
and Music List excluding Movie List.
4 Press the Navigation buttons to scroll to a file
you want and press OK.

Page 1/1

When you select the Set Audio Play, Contents List

USB1 USB Drive Drive1 Page 1/1

1 Press the navigation buttons to scroll to select

test1.cts test2.cts test3.cts test4.cts
07/01/2011 07/01/2011 07/01/2011 07/01/2011

test5.cts

the Repeat or Random.

07/01/2011

2 Press the navigation buttons to scroll to make Move Play P Page Change

To Movie List Change Numbers Exit

appropriate adjustments.

When you select the Set Audio,

1 Press the navigation buttons to scroll to select

the Sound Mode, Clear Voice II or Balance.
NOTE
2 Press the navigation buttons to scroll to make
appropriate adjustments. While playing media files from Contents List,
yy
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
If there is the AutoPlay folder in the USB
yy
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
The function of Contents List may not be
yy
supported depending on the model.
 ENTERTAINMENT 39

DivX® VOD Guide DivX® VOD Deregistration

You should deregister your device with 8 digit DivX

ENGLISH
deregistration code from your device at www.divx.

ENG
DivX® VOD Registration com/vod.
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10 1 Press SETTINGS to access the main menus.
digit DivX registration code from your device at
www.divx.com/vod. 2 Press the navigation buttons to scroll to MY ME-
DIA and press OK.

1 Press SETTINGS to access the main menus. 3 Press the Blue button.
2 Press the navigation buttons to scroll to MY ME- 4 Press the navigation buttons to scroll to Deacti-
DIA and press OK. vation and press OK.

3 Press the Blue button. 5 Press the navigation buttons to select Yes to
confirm.
4 Press the navigation buttons to scroll to DivX
Reg. Code and press OK. Deregistration code :
********
5 View the registration code of your display. Deregister at http://vod.divx.com
Continue with registration?
6 When you are finished, press EXIT. Yes No
When you return to the previous menu, press
BACK.
6 When you are finished, press EXIT.
When you return to the previous menu, press
You must register your device to
play DivX protected videos. BACK.
Registration code : **********
Register at http://vod.divx.com

Close

NOTE NOTE

Once the deregistration is executed, you

yy
While you are checking the registration
yy
must register your device again to see
code, some buttons may not work.
DivX® VOD contents.
If you use the DivX registration code of
yy
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
product.
The video or audio files that are not con-
yy
verted by the standard DivX codec may be
corrupted or not be played.
The DivX VOD code allows you to activate
yy
up to 6 devices under one account.
 40 ENTERTAINMENT

Using PIP/PBP 5 Select the PIP or PBP icon from the play list.
Displays videos or photos stored on a USB device
ENGLISH

on a single monitor by dividing it into the main and

ENG

sub screens.

1 Press the SETTINGS button to move to

OPTION and press OK.

2 Press PIP/PBP to select PIP or PBP and then 01:02:30 / 02:30:25

press OK.
MENU Option Hide Exit

< Movie List >

PIP/PBP Move Pre.

Mode Off
Position PIP
Size PBP

3 Select Movie List or Photo List from My

Media. (With PIP/PBP selected, the Music
List and Contents List are deactivated. The
2/13
function of Contents List may not be supported Slideshow BGM MENU Option Hide Exit

depending on the model.)

< Photo List >

Movie List Photo List Music List Contents List 6 Select either Main or Sub for sound. You must
to select the output sound before running the
4 Select a file you want and then press OK. PIP or PBP function.

Page 1/1
Movie List Select the sound path.
USB1 USB Drive Drive1 Page 1/1

Main Sub
001 002 003 004

005 006

7 The sub screen is displayed on the main

screen.
Move Play P Page Change

To Photo list Change Numbers Mark Mode Exit

 CUSTOMIZING SETTINGS 41

CUSTOMIZING SETTINGS

ENGLISH
ENG
Accessing the Main Menus
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to one of the following menus and
press OK.

3 Press the navigation buttons to scroll to the setting or option you want
and press OK.

4 When you are finished, press EXIT.

When you return to the previous menu, press BACK.

PICTURE AUDIO
Adjusts the image size, Adjusts the sound quality,
quality, or effect. effect, or volume level.

TIME
Sets the time, date, or
PICTURE AUDIO TIME
timer feature.

OPTION MY MEDIA
Customizes the general Display and play movie,
settings. photo and music content
OPTION NETWORK MY MEDIA
stored on your USB.

NETWORK
Sets up the network
setting.
 42 CUSTOMIZING SETTINGS

PICTURE Settings PICTURE Move OK

ENGLISH

• Aspect Ratio : 16:9 ꔋ

1 Press SETTINGS to access the main menus.
ENG

• Energy Saving : Off

• Easy Brightness Control : Off
2 Press the navigation buttons to scroll to PICTURE and • Smart Energy Saving : Off
press OK. • Picture Mode : Standard
• Backlight 70

3 Press the navigation buttons to scroll to the setting or • Contrast 100

• Brightness 50
option you want and press OK. • Sharpness 50
- To return to the previous level, press BACK. • Color 60
• Tint 0 R G

4 When you are finished, press EXIT. • Color Temp. 0 W C

When you return to the previous menu, press • Advanced Control

BACK. • Picture Reset

• TruMotion : Low
• Screen

The available picture settings are described in the following:

Setting Description
Aspect Ratio Changes the image size to view images at its optimal size.
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Energy Saving Level

Off Disables Energy Saving function.

Minimum/ Selects the brightness level of the backlight.
Medium/
Maximum
Screen Off The screen turns off in 3 seconds.
Easy Adjusts the backlight according to the schedule you set.
Brightness Mode
Control
Off Disables Easy Brightness Control.
On Enables Easy Brightness Control.

NOTE
yyEasy Brightness Control is disabled if the current time is not set.
yyIf Energy Saving is set to Maximum, Easy Brightness Control is disabled.
yyYou can set up to six schedules and they will be sorted in time ascending order.
yyIf more than six schedules are added, the latest schedule will be automatically deleted.
yyYou can delete a schedule by pressing the OK button.
yyDuplicate schedules are not added, but the backlight value changes.
yyIt may not be supported depending on the model.

Smart Energy Adjusts the backlight and contrast depending on the screen brightness.
Saving
Level
Off Disables the Smart Energy Saving function.
On Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Picture Mode Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode. The available preset
picture modes vary depending on the monitor set .
 CUSTOMIZING SETTINGS 43

Setting Description
TruMotion Corrects images to display smoother motion sequences.
TruMotion

ENGLISH
• Low : De-Judder / De-Blur value is set to 3. ◄ Low ►

ENG
• High : De-Judder / De-Blur value is set to 7. • De-Judder 3
• User : De-Judder / De-Blur can be set manually.
• De-Blur 3
-D e-Judder : This function adjusts juddering of
the screen. OK

- De-Blur : This function adjusts and eliminates blurring of the screen.

SCREEN Customizes the PC display options in RGB mode.
(In RGB Option
Mode Only)
Resolution Selects a proper resolution. See “Customizing PC display options”.
Auto Configure Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/ Adjusts the options when the picture is not clear, especially when characters are
Phase shaky, after the auto configuration.
Reset Restores the options to the default setting.

Basic Image Options

Setting Description
Backlight  djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color Adjusts intensity of all colors.
Tint Adjusts the balance between red and green levels.
Color Temp . Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control Customizes the advanced options. Refer to the Advanced image options.
Picture Reset Restores the options to the default setting.

NOTE

If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport, or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
In Vivid mode, the luminance of the backlight is calibrated, so the settings may be different depending
yy
on each product.
 44 CUSTOMIZING SETTINGS

Advanced Control
ENGLISH

Setting Description
ENG

Dynamic Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
Contrast picture is improved by making bright parts brighter and dark parts darker. (This function can be used
(Off/High/ only under component.)
Medium/Low)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only component.)
Clear White Make the white area of screen brighter and more white.
(Off/High/Low)
Skin Color It detects the skin area of video and adjusts it to express a natural skin color.
(-5 to 5)
Noise Reduces screen noise without compromising video quality. (This function can be used only under
Reduction Component.)
(Off/High/
Medium/Low)
Digital Noise This option reduces the noise produced while creating digital video signals.
Reduction
(Off/High/
Medium/Low)
Gamma Set your own gamma value. On the monitor, high gamma values display whitish images and low
(High/Medium/ gamma values display high contrast images.
Low)
Black Level Low: The picture of the screen gets darker.
(High/Low) High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV)
 CUSTOMIZING SETTINGS 45

AUDIO Settings
AUDIO Move OK

ENGLISH
• Clear Voice II : Off ꔋ
1 Press SETTINGS to access the main menus.

ENG
• Balance 0 L R

• Sound Mode : Standard

2 Press the navigation buttons to scroll to AUDIO and press • Infinite Sound: Off
OK. • Treble 50
• Bass 50
3 Press the navigation buttons to scroll to the setting or • Reset
option you want and press OK. • Digital Audio Input
• Speaker : Off
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.

The available audio options are described in the following:

Setting Description
Clear Voice ll By differentiating the human sound range from others, it helps users make dialog more clear.
Balance Adjusts balance between the left and right speakers according to your room environment.
Sound Mode The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard The most commanding and natural audio.
Music Select this option to enjoy the original sound when listening to the music.
Cinema Select this option to enjoy sublime sound.
Sport Select this option to watch sports broadcasting.
Game To enjoy dynamic sound when playing a game.

NOTE
If sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.

Option
Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo sound from two
speakers.
Treble Controls the dominant sounds in the output. When you turn up the treble, it
will increase the output to the higher frequency range.
Bass Makes the output sound softer. When you turn up the bass, it will increase
the output to the lower Frequency.
Reset Resets the sound mode to the default setting.
Digital Audio HDMI/DisplayPort: Outputs the sound of digital signal from HDMI and display ports through the
Input monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
 46 CUSTOMIZING SETTINGS

TIME Settings
TIME Move OK
ENGLISH

• Clock ꔋ
1 Press SETTINGS to access the main menus.
ENG

• Off Time : Off

• On Time : Off
2 Press the navigation buttons to scroll to TIME and press OK. • Sleep Timer : Off
• Power On Delay : Off
3 Press the navigation buttons to scroll to the setting or option • Auto Off : 15 min.
you want and press OK. • Automatic Standby : 4hours
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.

The available time settings are described in the following:

Setting Description
Clock Sets the time feature.
On/Off Time Sets the time to turn on or off the monitor set.
Sleep Timer Sets the length of time until the monitor set to turns off. When you turn the monitor set off and turn
it on again, the Sleep Timer will be set to off.
Power on delay When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
Standby

NOTE

Once the on or off time is set, these functions operate daily at the preset time.
yy
The scheduled power-off function works properly only when the device time is set correctly.
yy
When the scheduled power-on and power-off times are the same, the power-off time has priority over
yy
the power-on time if the set is turned on, and vice versa if the set is turned off.
 CUSTOMIZING SETTINGS 47

OPTION Settings
OPTION Move OK

ENGLISH
• Language ꔋ
1 Press SETTINGS to access the main menus.

ENG
• ISM Method : Normal
• DPM Select : On
2 Press the navigation buttons to scroll to OPTION and press • Fail Over : Off
OK. • Factory Reset
• Set ID :1
3 Press the navigation buttons to scroll to the setting or option • Tile Mode
you want and press OK. • PIP/PBP
• Fan
- To return to the previous level, press BACK.
• USB Content Recovery : Off
4 When you are finished, press EXIT. • Product/Service Info.

When you return to the previous menu, press BACK.

The available option settings are described in the following:

Setting Description
Language To choose the language in which the control names are displayed.
ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal Leave on normal if you don't foresee image burn in being a problem.
Orbiter May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select A user can choose to turn the power saving mode on / off.

NOTE
yyYou can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
yyIt makes a little difference according to your environment.
yyIt may not be supported depending on the model.

Fail Over If there is no input signal, it automatically switches to another input with signal.
Setting
Off Stops auto switch of the input source.
Auto Attempts to find another input source having video signal according to the
defined input order if no video signal comes from the current input source.
(Refer to the sequence of the table below.)
Current
Attempt 1 Attempt 2 Attempt 3 Attempt 4
Input Source
RGB HDMI DVI DP If there is no
DVI HDMI DP RGB available video
signal to switch to,
HDMI DVI DP RGB then the current
DP HDMI DVI RGB input source
remains.
Manual The input source changes according to the specified order.
If there is no video signal from the specified input source, then the current
input source remains.
 48 CUSTOMIZING SETTINGS

Setting Description
Factory Reset Select this option to return to the default factory settings.
ENGLISH

Set ID You can assign a unique Set ID NO (name assignment) to each product when several products
ENG

are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Tile Mode Tile Mode To use this function
- Must be displayed with various other products.
- Select Tile Mode, set rows and columns, and then enter the tile ID to set the
location.
- Tile Mode: row x column (row = 1-15, column = 1-15).
- 15 x 15 available.
Auto Config. Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position Moving the screen position horizontally and vertically.
Size Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural The image is omitted by the distance between the screens to be naturally
shown.
Reset Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
PIP/PBP Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
and sub screens.
Option
Mode Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position Adjusts the position of the sub screen (top left, bottom left, top right, bottom
right)
The default value is the bottom right.
Size Adjusts the size of the sub screen (Size 0 to 10).
The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.

NOTE
yyThe Position and Size options are enabled only in PIP mode.

NOTE

If the interior temperature of the set exceeds 80°C, the set will be turned off automatically for safety
yy
reasons.
 CUSTOMIZING SETTINGS 49

Setting Description
Fan Setting

ENGLISH
(Only for Mode This option indicates the monitor's internal temperature and controls the

ENG
47WV50MS
model) fan.
• Auto: Switches the fan on and off according to the set temperature.
• On: The fan is always switched on.
• Manual: Switches the fan on and off according to user settings.
Hysteresis The difference in temperature between when the fan is switched on and
when it is off.
Set Temperature Set the temperature at which the fan is switched on.
Current Temperature Current temperature inside the set.

NOTE
yyWe recommend that you use the Auto mode to prevent any malfunctions resulting from
incorrect fan settings.
yyIf the interior temperature of the set exceeds 80°C, the set will be turned off automatically
for safety reasons.

USB Content Replays the content in a USB when the power is back on if it is turned off during playing a content.
Recovery (This function operates the same when a USB is disconnected and connected again.)
Product/Service Displays the model name, software version, serial number, IP address, MAC address, and home
Info. page.
 50 CUSTOMIZING SETTINGS

Tile Mode
This monitor can be tiled with additional monitors to create a large tiled display.
ENGLISH
ENG

Off 1X2 2X2 3X3

When the Tile Mode When using 2 monitors When using 4 monitors When using 9 monitors
option is disabled
ID 1 ID 2 ID 1 ID 2 ID 1 ID 2 ID 3

ID 3 ID 4 ID 4 ID 5 ID 6

Tile ID
ID 7 ID 8 ID 9

4X4 5X5
When using 16 monitors When using 25 monitors

ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 3 ID 4 ID 5

ID 5 ID 6 ID 7 ID 8 ID 6 ID 7 ID 8 ID 9 ID 10

ID 10 ID 11 ID 12 ID 11 ID 12 ID 13 ID 14 ID 15
ID 9

ID 13 ID 14 ID 15 ID 16 ID 16 ID 17 ID 18 ID 19 ID 20

ID 21 ID 22 ID 23 ID 24 ID 25

Tile Mode - Natural mode

When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.

Before After
 CUSTOMIZING SETTINGS 51

PIP/PBP
NOTE
Displays videos or photos stored in the USB device on

ENGLISH
a single monitor by dividing it into the main and sub The subscreen is only supported when using
yy

ENG
screens. the USB device.
Mode 47WV50BS is not supporting composite(AV)
yy
signal & input.
*PIP (Picture In Picture): Displays the sub screen
Sub
in the main screen.
USB
*PBP (Picture By Picture): Displays the sub
screen next to the main screen. Component O
RGB O
Main
HDMI/DVI-D/Display Port O
Main Sub AV X
Screen Screen
You can only change the size and position in
yy
PIP PBP PIP mode.
With PBP selected, the Aspect Ratio option
yy
in the PICTURE menu is disabled (Fixed as
16:9).
Position While running the PBP function, the Tile
yy
Adjusts the position of the subscreen (top left, Mode function does not work.
bottom left, top right, bottom right) You must select the output sound before
yy
running the PIP or PBP functions. (Select
either main or sub.)
If you fail to select main or sub from the
yy
sound selection box, and if the OSD
disappears after either a period of time or
when the Exit or Back key is pressed, the
top left top right PIP/PBP subscreen is not activated.
You cannot change the sound while running
yy
the PIP or PBP functions. If you want to
change the sound, please restart PIP/PBP.
The picture quality of the subscreen is set
yy
according to the values selected in the main
menu, not the USB device.
bottom left bottom right If you play videos you selected in PIP/PBP
yy
mode, the videos will play back repeately in
succession.
The buttons below work in PIP mode.
yy
Size
Button Photo Movie
Adjusts the size of the subscreen (Size 0-10).

PBP
960x1080

10 : 960x540

PIP

0:
480x270

< 1920x1080 >

 52 CUSTOMIZING SETTINGS

Picture ID
ENGLISH
ENG

Picture ID is used to change the settings of a 2 If you press the left/right buttons or press the
specific display using a single IR receiver for ON button repeatedly, the Picture ID cycles
multi-vision. The set receiving the IR signal through OFF and 1 to 4. Assign the ID you
communicates with another set via an RS232 want.
connection. Each set is identified by a Set ID. If
you assign the Picture ID using the remote control, Picture ID
only displays with the same Picture ID and Set ID
can be controlled remotely. ◀ Off ▶

Close
AUDIO
(RGB/DVI)
RS-232C OUT RS-232C OUT RS-232C OUT
AUDIO
(RGB/DVI)
RS-232C OUT RS-232C OUT RS-232C OUT

RS-232C IN RS-232C IN RS-232C IN If you assign the Set ID to each set with
yy
REMOTE
CONTROL IN
RS-232C IN RS-232C IN RS-232C IN multi-vision, and then assign the Picture ID
REMOTE
CONTROL IN
using the red button on the remote control,
the key command is displayed for the set
with the same Set ID and Picture ID. A set
with different Set IDs and Picture IDs cannot
be controlled by IR signals.
IR Receiver
The maximum value of the Picture ID can be
yy
set in the Total Set ID menu.
Please refer to the Installation Manual for
yy
more information on Total Set ID assignment.
Picture ID

◄ Off ►

Close

NOTE

For example, if the Picture ID is assigned to

yy
2, the upper right display (Set ID: 2) can be
controlled by IR signals.
2X2 Multi-Vision (Total Set ID: 4)
For each set, you can change the settings
yy
Set IDs are assigned as shown in the picture.
for the PICTURE, AUDIO, TIME, NETWORK
and MY MEDIA menus or the hot keys on the
remote control.
If you press the green OFF button for Picture
yy
1 Press the red ON button on the remote control IDs, the Picture IDs for all sets are turned off.
to assign the Picture ID. If you then press any button on the remote
control, all sets will start working again.
yyPicture ID will be disabled while using the
MY MEDIA menu.
yyIf Picture ID is set to Off, holding buttons
on the remote control will execute only one
action at a time.
 CUSTOMIZING SETTINGS 53

NETWORK Settings NETWORK Move OK

ENGLISH
• Player Name Setting ꔋ
1 Press SETTINGS to access the main menus.

ENG
• Network Setting : None
• Network Status : Not connected
2 Press the navigation buttons to scroll to NETWORK and • Server IP Setting
press OK. • Server IP Status : Not connected

3 Press the navigation buttons to scroll to the setting or option

you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.

The available option settings are described in the following:

Setting Description
Player Name Sets the player name used in SuperSign Manager.(Up to 20 characters)
Setting
Network Setting Configure the network settings.
Network Status Display the network status.
- Internet is connected : Extermally connected
- Network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server

CAUTION

When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
 54 MAKING CONNECTIONS

MAKING CONNECTIONS
ENGLISH
ENG

Connect various external devices to the ports on the monitor set’s back panel.
1 Find an external device you want to connect to your monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.

HD Receiver DVD VCR

HDMI HDMI AV
DVI DVI Component
AV AV
Component Component

Speaker
USB

Memory storage

PC
Camcorder/Camera Gaming device

HDMI HDMI HDMI

DVI DVI AV
RGB AV Component
LAN Component
Display Port

NOTE

If you connect a gaming device to the monitor set, use the cable supplied with the gaming device.
yy
47WV50BS is not supporting composite(AV) signal & input.
yy
 MAKING CONNECTIONS 55

Connecting to a HD Receiver, HDMI Connection

DVD, Camcorder, Camera, Transmits the digital video and audio signals from

ENGLISH
Gaming Device, or VCR Player

ENG
an external device to the monitor set. Connect the
external device and the monitor set with the HDMI
Connect a HD receiver, DVD, or VCR player to the cable as shown on the following illustration.
monitor set and select an appropriate input mode.

Back of the product.

DVI Connection AUDIO

RGB
DVI IN /COMPONENT OUT
IN /DVI

Transmits the digital video signal from an external RGB

/COMPONENT IN

device to the monitor set. Connect the external

REMOTE
device and the monitor set with the DVI cable as CONTROL IN

shown in the following illustration. To transmit an

audio signal, connect an optional audio cable.

Back of the product.

(not included)
DVI IN
RGB
/COMPONENT OUT AUDIO
IN /DVI

RGB
/COMPONENT IN

REMOTE
CONTROL IN

(not included)

NOTE

Use a High Speed HDMI™ Cable.

yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
 56 MAKING CONNECTIONS

Component Connection AV(CVBS) Connection

ENGLISH

Transmits the analog video and audio signals from Transmits the analog video and audio signals from
ENG

an external device to the monitor set. Connect an external device to the monitor set. Connect
the external device and the monitor set with the the external device and the monitor set with
RGB-Component cable as shown in the following the composite cable as shown in the following
illustration. illustration.

Back of the product.

Back of the product. RGB
/COMPONENT OUT AUDIO COMPOSITE AUDIO
IN IN
RGB
/COMPONENT OUT AUDIO COMPOSITE AUDIO
IN IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
REMOTE REMOTE
CONTROL IN CONTROL IN
REMOTE REMOTE
CONTROL IN CONTROL IN

(not included) (not included)

(not included) (not included)

VIDEO OUT
VIDEO OUT

NOTE NOTE

When connecting to the component port

yy If input signals are received through the AV
yy
using the shared interface, the port must cable, multiple monitors cannot be connected
match up to the input source. Otherwise, via the RGB OUT port.
noise may occur. Input signal may be degraded or lost when
yy
multiple monitors are connected.
For component, in general, up to 3 monitors
yy
can be connected via the Component Out
port (RGB Shared) if the signal is stable and
there is no cable loss.
If you want to connect more than this number
yy
of monitors, we recommended that you use a
distributor.
47WV50BS is not supporting composite(AV)
yy
signal & input.
 MAKING CONNECTIONS 57

Connecting to the LAN Connecting to a USB

ENGLISH
Connect a USB storage device such as s USB

ENG
flash memory, external hard drive, MP3 player, or
LAN Connection
a USB memory card reader to the monitor set and
access the USB menu to use various multimedia
files.
A Using a router (Switch)

LAN Switch

Monitor Set PC
or

Network

B Using the Internet.

LAN
Network

Monitor Set PC
 58 MAKING CONNECTIONS

Daisy Chain Monitors

ENGLISH

Use this function to share the RGB video signal with other monitors without having to use a separate signal
ENG

splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.

RGB Cable
15-pin D-Sub Signal Cable
RGB RGB RGB RGB
/COMPONENT OUT /COMPONENT OUT /COMPONENT OUT /COMPONENT OUT

RGB RGB RGB RGB

(Max 3m) /COMPONENT OUT /COMPONENT OUT /COMPONENT OUT /COMPONENT OUT

(not included)
RGB RGB RGB RGB
/COMPONENT IN /COMPONENT IN /COMPONENT IN /COMPONENT IN
RGB RGB RGB RGB
/COMPONENT IN /COMPONENT IN /COMPONENT IN /COMPONENT IN

Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4

DVI Cable
DVI
DVI IN IN DVIDVI
OUTOUT DVI DVI
IN IN DVI OUT
DVI OUT DVI INDVI IN DVI OUT
DVI OUT DVI IN DVI IN

DVI Cable
(Max 3m)

Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4

NOTE

When multiple monitors are connected in RGB input, it is recommended to use a distributor to avoid
yy
signal degradation and cable loss.
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended
yy
resolution) if the signal is stable and there is no cable loss. If you want to connect more than this
number of monitors, we recommended that you use a distributor.
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
yy
HDCP-encrypted content. (The DVI Out port does not support HDCP.)
If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)
yy
booster or DVI (RGB) optical cable.
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via
yy
the DVI Out port.
 TROUBLESHOOTING 59

TROUBLESHOOTING

ENGLISH
ENG
No image is displayed
Problem Resolution
Is the product power cord yy See if the power cord is properly connected to the outlet.
connected?
Power is on, but the screen yy Adjust brightness and contrast again.
appears extremely dark. yy Backlight may need repair.
Does the 'Invalid Format' yy The signal from the PC (video card) is out of the vertical or horizontal
message appear? frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
 oes the 'No signal' message
D yy The signal cable between PC and product is not connected. Check
appear? the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.

'Unknown Product' message appears when the product is connected.

Problem Resolution
Did you install the driver? yy See if the plug&play function is supported by referring to the video
card user manual.
 60 TROUBLESHOOTING

The screen image looks abnormal.

Problem Resolution
ENGLISH
ENG

Is the screen position wrong? yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen? to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred. to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed yy The proper input signal is not connected to the signal port. Connect
abnormally. the signal cable that matches with the source input signal.

After-image appears on the product.

Problem Resolution
After-image appears when the yy If you use a fixed image for a long time, the pixels may be damaged
product is turned off. quickly. Use the screen-saver function.

The audio function does not work.

Problem Resolution
No sound? yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
Sound is too dull. yy Select the appropriate equalize sound.
Sound is too low. yy Adjust the volume.
 TROUBLESHOOTING 61

Screen color is abnormal.

Problem Resolution

ENGLISH
ENG
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors). Control Panel - Display - Settings - Color Table menu in Windows.

 creen color is unstable or

S yy Check the connection status of the signal cable. Or, re-insert the PC
mono-colored. video card.

Do black spots appear on the yy Several pixels (red, green, white, or black color) may appear on the
screen? screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.

The operation does not work normally.

Problem Resolution
The power suddenly turned off. yy Is the sleep timer set?
yy Check the power control settings. Power interrupted.

NOTE

The software version can be updated for improvement in performance. Customer needs to ensure
yy
the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and
upload revised software version to the product according to the guidance provided by LGE.
 62 SPECIFICATIONS

SPECIFICATIONS
ENGLISH
ENG

LCD Panel Screen Type 1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1192.8 mm
Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V)
Video Signal Max. Resolution RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency RGB : 30 kHz to 83 kHz
HDMI/DVI/DP : 30 kHz to 83 kHz
Vertical Frequency RGB : 50 Hz to 75 Hz
HDMI/DVI/DP : 56 Hz to 60 Hz
Synchronization Type Separate Sync, Composite(AV) Sync, Digital, SOG
(*47WV50BS is not supporting Composite(AV) signal and input.)
Input Connector 15-pin D-Sub type (RGB / Component ), HDMI/DVI/DP(digital),
Composite(AV), RS-232C, LAN, USB
(*47WV50BS is not supporting Composite(AV) signal and input.)
Power Rated Voltage
47WV50BR / 47WV50BS AC 100-240 V~, 50 / 60 Hz 1.5 A
47WV50MS AC 100-240 V~, 50 / 60 Hz 1.8 A
Power Consumption
47WV50BR On Mode : 150 W Typ. 190 W Max
47WV50BS Smart Energy Saving Mode : 80 W Typ.
Off Mode : ≤ 0.5 W
Sleep Mode : ≤ 0.7 W
47WV50MS On Mode : 160 W Typ. 200 W Max
Smart Energy Saving Mode : 90 W Typ.
Off Mode : ≤ 0.5 W
Sleep Mode : ≤ 0.7 W
Dimensions
(Width x Height x * Wall Bracket available VESA
H
Depth) / Weight 600 x 400

W
D

47WV50BR / 47WV50BS 1044.9 mm X 590.0 mm X 89.9 mm / 18.5 Kg

47WV50MS 1044.9 mm X 590.0 mm X 89.9 mm / 18.7 Kg
Environmental Operating Temperature 0 °C to 40 °C
conditions Operating Humidity 10 % to 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity 5 % to 95 %
 SPECIFICATIONS 63

ENGLISH
ENG
* Applicable only for models that support the speakers

Audio RMS Audio Output 10 W + 10 W (R + L)

Input Sensitivity 0.7 Vrms
Speaker Impedance 8Ω

Product specifications shown above may be changed without prior notice due to upgrade of product functions.
 64 SPECIFICATIONS

RGB (PC) supported mode DTV Mode

ENGLISH
ENG

Horizontal Vertical
Resolution Resolution Component HDMI/DVI (DTV)
Frequency(kHz) Frequency(Hz)
640 x 480 31.469 59.94 480i o x
640 x 480 37.5 75 576i o x
720 x 400 31.468 70.8 480p o o

800 x 600 37.879 60.317 576p o o

800 x 600 46.875 75 720p o o

49.725 74.55 1080i o o

832 x 624
1080p o o
1024 x 768 48.363 60
1024 x 768 60.123 75.029
1280 x 720 44.772 59.855
1366 x 768 47.7 60
1280 x 1024 63.981 60.02
1280 x 1024 79.98 75.02
1680 x 1050 65.290 59.954
1920 x 1080 67.5 60

NOTE

When the cable is connected to the DVI,

yy
HDMI or the Display Port, you can select the
HDMI/DVI/Display Port(PC) supported mode PC/DTV mode optionally. It is recommended
you to set to the PC mode when connecting
Horizontal Vertical to PC; the DTV mode when connecting to
Resolution
Frequency(kHz) Frequency(Hz) DTV.
640 x 480 31.469 59.94
800 x 600 37.879 60.317
1024 x 768 48.363 60
1280 x 720 44.772 59.855 NOTE
1366 x 768 47.7 60
1280 x 1024 63.981 60.02 Vertical frequency: To enable the user to
yy
1680 x 1050 65.290 59.954 watch the product display, screen image
should be changed tens of times every
1920 x 1080 67.5 60
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
yyHorizontal frequency: The horizontal interval
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
 IR CODES 65

IR CODES

ENGLISH
ENG
All models do not support the HDMI/USB function.
yy
Some key codes are not supported depending on the model.
yy

Code (Hexa) Function Note

08 Power R/C BUTTON
0B INPUT R/C BUTTON
C4 MONITOR ON R/C BUTTON
C5 MONITOR OFF R/C BUTTON
95 ENERGY SAVING ( ) R/C BUTTON
DC 3D R/C BUTTON
10 to 19 Number Key 0 to 9 R/C BUTTON
32 1/a/A R/C BUTTON
2F CLEAR R/C BUTTON
02 Volume R/C BUTTON
03 Volume R/C BUTTON
79 ARC R/C BUTTON
99 AUTO R/C BUTTON
09 MUTE R/C BUTTON
E0 BRIGHTNESS (Page UP) R/C BUTTON
E1 BRIGHTNESS (Page Down) R/C BUTTON
4D PSM R/C BUTTON
AA INFO ⓘ R/C BUTTON
5F W.BAL R/C BUTTON
43 SETTINGS R/C BUTTON
40 Up ▲ R/C BUTTON
41 Down ▼ R/C BUTTON
07 Left ◄ R/C BUTTON
06 Right ► R/C BUTTON
3F S.MENU R/C BUTTON
44 OK R/C BUTTON
28 BACK R/C BUTTON
5B EXIT R/C BUTTON
7E R/C BUTTON
7B TILE R/C BUTTON
B1 R/C BUTTON
B0 R/C BUTTON
BA R/C BUTTON
8F R/C BUTTON
8E R/C BUTTON
72 Red Key (PICTURE ID ON) R/C BUTTON
71 Green Key (PICTURE ID OFF) R/C BUTTON
63 Yellow Key R/C BUTTON
61 Blue Key R/C BUTTON
 66 CONTROLLING THE MULTIPLE PRODUCT

CONTROLLING THE MULTIPLE PRODUCT

ENGLISH
ENG

Use this method to connect several products to a single PC. You can control several products at one
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy

Connecting the cable

Connect the RS-232C cable as shown in the picture.
yyThe RS-232C protocol is used for communication between the PC and product. You can turn the
product on/off, select an input source or adjust the OSD menu from your PC.

RS-232C Cable

PC
Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4

RS-232C Configurations
NOTE
8-Wire Configurations (Cross-over RS-232C cable)
PC Set
When using 3-wire connections (non-
yy
DCD 1 1 DCD
RXD 2 3 TXD
standard), an IR daisy chain cannot be used.
TXD 3 2 RXD
GND 5 5 GND
DTR 4 6 DSR
DSR 6 4 DTR
RTS 7 8 CTS
CTS 8 7 RTS
D-Sub 9 D-Sub 9
(Female) (Female)

Communication Parameter
Baud Rate : 9600 BPS
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1 bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
 CONTROLLING THE MULTIPLE PRODUCT 67

Command Reference List

ENGLISH
ENG
COMMAND DATA
1 2 (Hexadecimal)

01. Power k a 00 to 01
02. Input Select x b Refer to ‘Input Select.’
03. Aspect Ratio k c Refer to ‘Aspect Ratio.’
04. Energy Saving j q Refer to ‘Energy Saving.’
05. Picture mode d x Refer to ‘Picture mode.’
06. Contrast k g 00 to 64
07. Brightness k h 00 to 64
08. Sharpness k k 00 to 64
09. Color k i 00 to 64
10. Tint k j 00 to 64
11. Color Temperature x u 00 to 64
12. H Position f q 00 to 64
13. V Position f r 00 to 64
14. H Size f s 00 to 64
15. Auto configuration j u 01
16. Balance k t 00 to 64
17. Sound mode d y Refer to ‘Sound mode.’
18. Treble k r 00 to 64
19. Bass k s 00 to 64
20. Speaker d v 00 to 01
21. Volume Mute k e 00 to 01
22. Volume Control k f 00 to 64
23. Time 1(Years/ Months/ Days) f a Refer to ‘Time 1.’
24. Time 2(Hours/ Minutes/Seconds) f x Refer to ‘Time 2.’
25. Off Timer(Repeat mode/ Time) f e Refer to ‘Off Timer.’
26. On Timer(Repeat Mode/ Time) f d Refer to ‘On Timer.’
27. On Timer Input f u Refer to ‘On Timer Input.’
28. Sleep Time f f 00 to 08
29. Power On Delay f h 00 to 64
30. Automatic Standby m n 00 to 01
31. Auto Off f g 00 to 01
32. Language f i Refer to ‘Language.’
33. Power Indicator(Standby Light) f o 00 to 01
34. Power Indicator(Power Light) f p 00 to 01
35. ISM mode j p Refer to ‘ISM Method.’
36. Fail Over Select m i 00 to 02
37. Fail Over Input Select m j Refer to ‘Fail Over Input Select.’
38. Reset f K 00 to 02
 68 CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG

COMMAND DATA
1 2 (Hexadecimal)

39. Tile Mode d d 00 to 01

40. Tile Mode Check d z FF
41. Tile ID d i Refer to ‘Tile ID.’
42. Tile H Position d e 00 to 32
43. Tile V Position d f 00 to 32
44. Tile H Size d g 00 to 32
45. Tile V Size d h 00 to 32
46. Natural Mode (In Tile mode) d j 00 to 01
47. DPM Select f j 00 to 01
48. FAN Control d o 00 to 03
49. FAN Fault Check d w FF
50. Temperature Value d n FF
51. Remote Lock/ key Lock k m 00 to 01
52. Key m c Refer to ‘Key.’
53. OSD Select k l 00 to 01
54. Elapsed time return d l FF
55. Serial No. Check f y FF
56. S/W Version f z FF
57. White Balance Red Gain j m 00 to FE
58. White Balance Green Gain j n 00 to FE
59. White Balance Blue Gain j o 00 to FE
60. Backlight m g 00 to 64
61. PC Power Control d t 00 to 01
62. PC Power d s 00 to 01
63. Easy Brightness Control Mode s m 00 to 01
64. Easy Brightness Control Schedule s s Refer to ‘Easy Brightness Control Schedule.’
65. Reading luminance values m u Refer to ‘Reading luminance values.’
66. Status check s v Refer to ‘Status check.’
67. BLU Maintenance m t 00 to 01
68. Screen mute k d 00 to 01

Note : During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c)
yy
are not executed and treated as NG.
Some commands are not supported depending on the model.
yy
The ‘f f’ command which shows the status of a certain command does not display the OSD as the
yy
result in order to be compatible with SuperSign program.
 CONTROLLING THE MULTIPLE PRODUCT 69

Transmission / Receiving Protocol

ENGLISH
ENG
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]

* [Command1]: First command to control the set.

* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’

Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]

* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
 70 CONTROLLING THE MULTIPLE PRODUCT

01. Power (Command: k a) 04. Energy Saving (Command: j q)

To control the Power On/Off the display. To set the Energy Saving function.
Transmission Transmission
ENGLISH
ENG

[k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr]

Data 00 : Off Data 00: Off
01 : On 01: Minimum
Acknowledgement 02: Medium
03. Maximum
[a][ ][Set ID][ ][OK/NG][Data][x]
04: Auto
* Only when the monitor set is fully powered on, the 05. Screen Off
Acknowledgement signal is returned properly.
Acknowledgement
* There may be a certain time of delay between the
Transmission and Acknowledgement signals. [q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.

02. Input Select (Command: x b)

To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20: Input (AV)
40: Component 05. Picture Mode (Command: d x)
60: RGB To select the Picture Mode.
70: DVI-D(PC)
Transmission
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV) [d][x][ ][Set ID][ ][Data][Cr]
A0: HDMI(HDMI1)(PC) Data 00: Vivid
C0: Display Port(DTV) 01: Standard
D0: Display Port(PC) 02. Cinema
91: HDMI2/SDI(DTV) 03. Sport
A1: HDMI2/SDI(PC) 04: Game
B0: SuperSign Acknowledgement
Acknowledgement [x][ ][Set ID][ ][OK/NG][Data][x]
[b][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.

03. Aspect Ratio (Command: k c)

To adjust the screen format.
Transmission 06. Contrast (Command: k g)
To adjust the screen contrast.
[k][c][ ][Set ID][ ][Data][Cr]
Transmission
Data 01: 4:3
02: 16:9 [k][g][ ][Set ID][ ][Data][Cr]
04: Zoom Data 00 to 64: Contrast 0 to 100
(AV, Component, HDMI/ DVI-D/ Display Port DTV) Acknowledgement
09: Just scan (720p or more)
[g][ ][Set ID][ ][OK/NG][Data][x]
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode (1:1)
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
 CONTROLLING THE MULTIPLE PRODUCT 71

07. Brightness (Command: k h) 10. Tint (Command: k j)

To adjust the screen brightness. To adjust the screen tint.
* This function is available only in AV/Component

ENGLISH
Transmission
input.

ENG
[k][h][ ][Set ID][ ][Data][Cr]
Transmission
Data 00 to 64: Brightness 0 to 100
[k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 00 to 64: Tint R50 to G50
[h][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]

08. Sharpness (Command: k k) 11. Color Temperature (Command: x u)

To adjust the screen sharpness. To adjust the screen Color Temperature.
* This function is available only in AV/Component Transmission
input.
[x][u][ ][Set ID][ ][Data][Cr]
Transmission
Data 00 to 64: Warm 50 to Cool 50
[k][k][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 00 to 64: Sharpness 0 to 100
[u][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]

09. Color (Command: k i) 12. H Position (Command: f q)

To adjust the screen color. To adjust the screen Horizontal Position.
* This function is available only in AV/Component * This function is available only when the Tile Mode is
input. set to Off.
Transmission * The operational range varies depending on the
RGB input resolution.
[k][i][ ][Set ID][ ][Data][Cr]
(Only available for RGB-PC input.)
Data 00 to 64: Color 0 to 100
Transmission
Acknowledgement
[f][q][ ][Set ID][ ][Data][Cr]
[i][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
 72 CONTROLLING THE MULTIPLE PRODUCT

13. V Position (Command: f r) 16. Balance (Command: k t)

To adjust the screen Vertical Position. To adjust the sound balance.
* This function is available only when the Tile Mode is Transmission
ENGLISH

set to Off.
ENG

[k][t][ ][Set ID][ ][Data][Cr]

* The operational range varies depending on the
RGB input resolution. Data 00 to 64: Left 50 to Right 50
(Only available for RGB-PC input.) Acknowledgement
Transmission [t][ ][Set ID][ ][OK/NG][Data][x]
[f][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]

17. Sound Mode (Command: d y)

14. H Size (Command: f s) To select the Sound Mode.
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is Transmission
set to Off. [d][y][ ][Set ID][ ][Data][Cr]
* The operational range varies depending on the Data 01: Standard
RGB input resolution. 02: Music
(Only available for RGB-PC input.) 03: Cinema
Transmission 04: Sport
[f][s][ ][Set ID][ ][Data][Cr] 05. Game

Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand) Acknowledgement

[y][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]

15. Auto Configuration (Command: j u) 18. Treble (Command: k r)

To adjust the picture position and minimize image To adjust the Treble values.
shaking automatically. Transmission
(Only available for RGB-PC input.) [k][r][ ][Set ID][ ][Data][Cr]
Transmission Data 00 to 64: Treble 0 to 100
[j][u][ ][Set ID][ ][Data][Cr] Acknowledgement
Data 01 : Set [r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
 CONTROLLING THE MULTIPLE PRODUCT 73

19. Bass (Command: k s) 22. Volume Control (Command: k f)

To adjust the Bass values. To set the playback volume.
Transmission Transmission

ENGLISH
ENG
[k][s][ ][Set ID][ ][Data][Cr] [k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bass 0 to 100 Data 00 to 64: Volume 0 to 100
Acknowledgement Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x] [f][ ][Set ID][ ][OK/NG][Data][x]

20. Speaker (Command: d v) 23. Time 1(Year/ Month/ Day) (Command: f a)

To select the speaker on/off. To set the Time 1(Year/ Month/ Day) values.
Transmission Transmission
[d][v][ ][Set ID][ ][Data][Cr] [f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 00: Off Data 1 00 to 14: 2010 to 2030
01: On Data 2 01 to 0C: January to December
Acknowledgement Data 3 01 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
[v][ ][Set ID][ ][OK/NG][Data][x]
Month/ Day) values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

21. Volume Mute (Command: k e) 24. Time 2(Hour/ Minute/ Second) (Command: f x)
To control the Volume Mute on/off. To set the Time 2(Hour/ Minute/ Second) values.
Transmission Transmission
[k][e][ ][Set ID][ ][Data][Cr] [f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 00 : Mute (Volume Off) Data1 00 to 17: 00 to 23 hours
01 : Current volume (Volume On) Data2 00 to 3B: 00 to 59 minutes
Acknowledgement Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
[e][ ][Set ID][ ][OK/NG][Data][x]
Minute/ Second) values.
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
 74 CONTROLLING THE MULTIPLE PRODUCT

25. Off Timer(Repeat Mode/ Time) (Command: f e) 26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the Off Timer(Repeat Mode/ Time) function. To set the On Timer(Repeat mode/ Time) function.
Transmission Transmission
ENGLISH
ENG

[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 Data1
1. F1 to F7 (Read data) 1. F1 to F7 (Read data)
F1: Read the 1st Off Time data F1: Read the 1st On Time data
F2: Read the 2nd Off Time data F2: Read the 2nd On Time data
F3: Read the 3rd Off Time data F3: Read the 3rd On Time data
F4: Read the 4th Off Time data F4: Read the 4th On Time data
F5: Read the 5th Off Time data F5: Read the 5th On Time data
F6: Read the 6th Off Time data F6: Read the 6th On Time data
F7: Read the 7th Off Time data F7: Read the 7th On Time data
2. E1-E7 (Delete one index), E0 (Delete all indexes) 2. E1-E7 (Delete one index), E0 (Delete all indexes)
E0: Delete all Off Time data E0: Delete all On Time data
E1: Delete the 1st Off Time data E1: Delete the 1st On Time data
E2: Delete the 2nd Off Time data E2: Delete the 2nd On Time data
E3: Delete the 3rd Off Time data E3: Delete the 3rd On Time data
E4: Delete the 4th Off Time data E4: Delete the 4th On Time data
E5: Delete the 5th Off Time data E5: Delete the 5th On Time data
E6: Delete the 6th Off Time data E6: Delete the 6th On Time data
E7: Delete the 7th Off Time data E7: Delete the 7th On Time data
3. 01 to 0C (Set the day of week for Off Time) 3. 01 to 0C (Set the day of week for On Time)
00: Off 00: Off
01: Once 01: Once
02. Daily 02. Daily
03: Monday to Friday 03: Monday to Friday
04: Monday to Saturday 04: Monday to Saturday
05: Saturday to Sunday 05: Saturday to Sunday
06. Sunday 06. Sunday
07. Monday 07. Monday
08. Tuesday 08. Tuesday
09. Wednesday 09. Wednesday
0A. Thursday 0A. Thursday
0B. Friday 0B. Friday
0C. Saturday 0C. Saturday
Data2 00 to 17: 00 to 23 Hours Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for * To read or delete the Off Time list, set FFH for
[Data2] and [Data3]. [Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time (Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.) data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time (Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.) data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to (Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".) "Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/ * This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set. Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] [d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
 CONTROLLING THE MULTIPLE PRODUCT 75

27. On Timer Input (Command: f u) 28. Sleep Time (Command: f f)

To select an external input for the current On Time To set the Sleep Time.
setting and add a new schedule or change the Transmission

ENGLISH
existing schedule.

ENG
[f][f][ ][Set ID][ ][Data][Cr]
Transmission
Data 00: Off (Sleep Timer off)
[f][u][ ][Set ID][ ][Data1][Cr] 01: 10 min.
[f][u][ ][Set ID][ ][Data1][Data2][Cr] 02: 20 min.
Data (Add schedule) 03: 30 min.
20: Input (AV) 04: 60 min.
40: Component 05: 90 min.
60. RGB 06: 120 min.
70: DVI-D 07: 180 min.
90: HDMI (HDMI1) 08: 240 min.
C0: Display Port Acknowledgement
91: HDMI2/SDI [f][ ][Set ID][ ][OK/NG][Data][x]
B0:SuperSign
Data1 (Change schedule)
1. F1 to F7 (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component 29. Power On Delay (Command: f h)
60: RGB To set the schedule delay when the power is turned
70: DVI-D on. (Unit: Second)
90: HDMI (HDMI1)
Transmission
C0: Display Port
91: HDMI2/SDI [f][h][ ][Set ID][ ][Data][Cr]
B0:SuperSign Data 00 to 64: min. 0 to max. 100 (sec.)
* To read the schedule input, enter FFH for [Data2]. Acknowledgement
If no schedule is available for [Data1] when [h][ ][Set ID][ ][OK/NG][Data][x]
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when 1 (Year/
Month/Day), 2 (Hour/Minute/Second), On Time
(Repeat Mode/Time) are set. 30. Automatic Standby (Command: m n)
** It may not be supported depending on the model. To set the Automatic Standby function.

Acknowledgement Transmission
[u][ ][Set ID][ ][OK/NG][Data][x] [m][n][ ][Set ID][ ][Data][Cr]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x] Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
 76 CONTROLLING THE MULTIPLE PRODUCT

31. Auto Off (Command: f g) 34. Power Indicator (Power Light) (Command: f p)
To set the Auto Off function. To set the Power Indicator (Power Light) function.
Transmission Transmission
ENGLISH
ENG

[f][g][ ][Set ID][ ][Data][Cr] [f][p][ ][Set ID][ ][Data][Cr]

Data 00: Off (No off after 15 minutes) Data 00: Off
01: 15 min.(Off after 15 minutes) 01: On
Acknowledgement ** It may not be supported depending on the model.
[g][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]

32. Language (Command: f i)

To set the language for OSD. 35. ISM mode (Command: j p)
Transmission To select ISM method for avoiding having a fixed
image remain on screen.
[f][i][ ][Set ID][ ][Data][Cr]
Transmission
Data 00: Czech
01: Danish [j][p][ ][Set ID][ ][Data][Cr]
02: German Data 01: Inversion
03: English 02: Orbiter
04: Spanish (EU) 04: White Wash
05: Greek 08. Normal
06: French Acknowledgement
07: Italian
[p][ ][Set ID][ ][OK/NG][Data][x]
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]

36. Fail Over Select (Command: m i)

33. Power Indicator (Standby Light) (Command: f o) To set the Fail Over function.
To set the Power Indicator (Standby Light) function.
Transmission
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
Data 00: Off 01: Auto
01: On 02: Manual
** It may not be supported depending on the model.
Acknowledgement
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
[o][ ][Set ID][ ][OK/NG][Data][x]
 CONTROLLING THE MULTIPLE PRODUCT 77

37. Fail Over Input Select (Command: m j) 40. Tile Mode Check (Command: d z)
To select the input source for auto switch. To check Tile Mode status.
* This command is only available when the fail over Transmission

ENGLISH
(auto) mode is set to Custom.

ENG
[d][z][ ][Set ID][ ][Data][Cr]
Transmission
Data FF: Check Tile Mode status.
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] ** It may not be supported depending on the model.
[ ][Data4][ ][Data5][Cr]
Acknowledgement
Data 1 to 5 (Priority 1 to 5) [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
60: RGB
70: DVI-D Data1 00: Tile Mode Off
90: HDMI(HDMI1) 01: Tile Mode On
C0: Display Port Data2 00 to 0F: Tile Row
91: HDMI2/SDI Data3 00 to 0F: Tile Column
* The number of data items differs depending on the
model.
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
38. Reset (Command: f k)
** It may not be supported depending on the model.
To execute the Picture, Screen, Audio and Factory
reset function. Acknowledgement
(Screen Reset can only be performed in RGB input [i][ ][Set ID][ ][OK/NG][Data][x]
mode.) *NG will be return if data is over (Tile Column) x (Tile
Transmission Row), except 0xFF.
[f][k][ ][Set ID][ ][Data][Cr]
Data 00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
39. Tile Mode (Command: d d) [d][e][ ][Set ID][ ][Data][Cr]
To set a Tile Mode and Tile Column/ Row values. Data 00 to 32: -50 (Left) to 0 (Right)
Transmission *Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
[d][d][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column [e][ ][Set ID][ ][OK/NG][Data][x]
*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
 78 CONTROLLING THE MULTIPLE PRODUCT

43. Tile V Position (Command: d f) 46. Natural Mode (In Tile Mode) (Command : d j)
To adjust the Tile Vertical position. To display the image naturally, the part of the image
* This function is available only when the Natural that would normally be displayed in the gap between
ENGLISH

option of the Tile Mode is set to Off while the Tile the monitors is omitted.
ENG

Mode set to On. Transmission

Transmission [d][j][ ][Set ID][ ][Data][Cr]
[d][f][ ][Set ID][ ][Data][Cr] Data 00: Off
Data 0 to 32: 0 (Bottom) to 50 (Top) 01: On
* Bottom/Top values depend on Tile Vertical size. Acknowledgement
** It may not be supported depending on the model.
[j][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]

44. Tile H Size (Command: d g) 47. DPM Select (Command: f j)

To adjust the Tile Horizontal Size. To set the DPM (Display Power Management)
*Set Tile H Position to 0x32 before setting Tile H function.
Size. Transmission
* This function is available only when the Natural
[f][j][ ][Set ID][ ][Data][Cr]
option of the Tile Mode is set to Off while the Tile
Mode set to On. Data 00: Off
01: On
Transmission
* Data settings may vary depending on your model
[d][g][ ][Set ID][ ][Data][Cr] as below.
Data 00 to 32: 0 to 50 Data 00: Off
** It may not be supported depending on the model. 01: 5 sec.
Acknowledgement 02: 10 sec.
03: 15 sec.
[g][ ][Set ID][ ][OK/NG][Data][x]
04: 1 min.
05: 3 min.
06: 5 min.
07: 10 min.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]

45. Tile V Size (Command: d h) 48. FAN Control (Command : d o)

To adjust the Tile Vertical size. To set the Fan mode.
*Set Tile V Position to 0x00 before setting Tile V Transmission
Size.
[d][o][ ][Set ID][ ][Data][Cr]
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile Data 00: Auto
Mode set to On. 01: On
02: Manual
Transmission
03: Off
[d][h][ ][Set ID][ ][Data][Cr] ** It may not be supported depending on the model.
Data 00 to 32: 0 to 50 Acknowledgement
** It may not be supported depending on the model.
[o][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
 CONTROLLING THE MULTIPLE PRODUCT 79

49. FAN Fault Check (Command: d w) 52. Key (Command: m c)

To check the fan errors. To send a key code of the IR remote control.
Transmission Transmission

ENGLISH
ENG
[d][w][ ][Set ID][ ][Data][Cr] [m][c][ ][Set ID][ ][Data][Cr]
Data FF: Read the status Data IR_KEY_CODE
Acknowledgement Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x] [c][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan fault For a key code, see the IR Code.
01: Fan OK * Some key codes are not supported depending on
02: Model without a Fan the model.

50. Temperature Value (Command: d n) 53. OSD Select (Command: k l)

To check the inside temperature value. To select OSD(On Screen Display) on/off.
Transmission Transmission
[d][n][ ][Set ID][ ][Data][Cr] [k][l][ ][Set ID][ ][Data][Cr]
Data FF: Check the status Data 00: Off
Acknowledgement 01: On
[n][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] [l][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed in hexadecimal.

54. Elapsed time return (Command: d l)

51. Remote Controller Lock/ Key Lock To check the panel used time.
(Command: k m) Transmission
When the remote control and front keys are locked in [d][l][ ][Set ID][ ][Data][Cr]
standby mode, the power cannot be turned on using
the remote control or front power button. Data FF: Read the status

Transmission Acknowledgement
[k][m][ ][Set ID][ ][Data][Cr] [l][ ][Set ID][ ][OK/NG][Data][x]

Data 00: Off (Lock Off) * Returned data means used hours in hexadecimal.
01: On (Lock On)
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
 80 CONTROLLING THE MULTIPLE PRODUCT

55. Serial No.Check (Command: f y) 58. White Balance Green Gain (Command: j n)
To check the Serial Numbers. To set the White Balance Green Gain.
Transmission Transmission
ENGLISH
ENG

[f][y][ ][Set ID][ ][Data][Cr] [j][n][ ][Set ID][ ][Data][Cr]

Data FF: Check the product Serial Number Data 00 to FE: Green Gain 0 to 254
Acknowledgement Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x] [n][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.

56. S/W Version (Command: f z) 59. White Balance Blue Gain (Command: j o)
To check the Software Version. To set the White Balance Blue Gain.
Transmission Transmission
[f][z][ ][Set ID][ ][Data][Cr] [j][o][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version Data 00 to FE: Blue Gain 0 to 254
Acknowledgement Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x] [o][ ][Set ID][ ][OK/NG][Data][x]

57. White Balance Red Gain (Command: j m) 60. Backlight (Command: m g)

To set the White Balance Red Gain. To adjust the screen backlight.
Transmission Transmission
[j][m][ ][Set ID][ ][Data][Cr] [m][g][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Data 00 to 64: Backlight 0 to 100
Acknowledgement
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
 CONTROLLING THE MULTIPLE PRODUCT 81

61. PC Power Control (Command: d t) 64. Easy Brightness Control Schedule (Command: s
To control the PC power if the PC and the monitor s)
are synchronized. Sets the Easy Brightness Control Schedule.

ENGLISH
ENG
Transmission Transmission
[d][t][ ][Set ID][ ][Data][Cr] [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data Data1
00: Synchronized (When the monitor is off, the PC is 1. F1 - F6 (Data Reading Functions)
also turned off.) F1: Reads the data of the 1st Easy Brightness
01: Not synchronized (The monitor is off but the PC Control
is on.) F2: Reads the data of the 2nd Easy Brightness
** It may not be supported depending on the model. Control
Acknowledgement F3: Reads the data of the 3rd Easy Brightness
[t][ ][Set ID][ ][OK][Data][x] Control
F4: Reads the data of the 4th Easy Brightness
Control
F5: Reads the data of the 5th Easy Brightness
Control
F6: Reads the data of the 6th Easy Brightness
Control
2. E1-E6 (Deletes One Index), E0 (Delete All
Indexes)
E0: Deletes all Easy Brightness Controls
62. PC Power (Command: d s)
E1: Deletes the 1st Easy Brightness Control
Control the PC power.
E2: Deletes the 2nd Easy Brightness Control
Transmission E3: Deletes the 3rd Easy Brightness Control
[d][s][ ][Set ID][ ][Data][Cr] E4: Deletes the 4th Easy Brightness Control
Data 00: PC is turned off. E5: Deletes the 5th Easy Brightness Control
01: PC is turned on. E6: Deletes the 6th Easy Brightness Control
** It may not be supported depending on the model. 3. 00-17: 00 - 23:00
Data2 00-3B: 00 - 59 minutes
Acknowledgement
Data3 00-64: backlight 0 - 100
[s][ ][Set ID][ ][OK][Data][x]
* To read or delete the configured Easy Brightness
Control list, set [Data2][Data3] to FF.
(ex1: ss 01 f1 ff ff - Reads the 1st index data from the
Easy Brightness Control.
ex2: ss 01 e1 ff ff - Deletes the 1st index data from
the Easy Brightness Control.
ex3: ss 01 07 1E 70 - Adds a schedule to the
backlight 70 at 07:30.)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
** It may not be supported, depending on the model.

63. Easy Brightness Control Mode (Command: s m)

Selects ON/OFF of Easy Brightness Control Mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Easy Brightness Control OFF
01: Easy Brightness Control ON
* It does not work if the current time is not set up.
** It may not be supported, depending on the model.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
 82 CONTROLLING THE MULTIPLE PRODUCT

65. Reading luminance values (Command: m u) 66. Status check (Command: s v)

Reads luminance values. Check various statuses.
ENGLISH

Transmission Transmission
ENG

[m][u][ ][Set ID][ ][FF][Cr] [s][v][ ][Set ID][ ][Data][ ][FF][Cr]

Acknowledgement Data 05: Check the normal operation of No.1 and
No.2 luminance sensors.
[u][][SetID][][OK/NG][Data1][Data2][Data3][Data4]
06: luminance sensor being used:
[Data5][Data6][Data7][x] 07: Check the normal operation of top, bottom,
Data1 00-64 backlight 0-100 or main temperature sensors.
Data2 00-ff: Upper 2-byte of CA210 measured value Acknowledgement
Data3 00-ff: Lower 2-byte of CA210 measured value
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
CA210 measured value Hex: 0000-ffff, Decimal: 0 -
65535 When the Data is 05
Data4 00-ff: Upper 2-byte of BLU measured value Data1 00: All normal
Data5 00-ff: Lower 2-byte of BLU measured value 01: BLU sensor 1 normal, BLU sensor 2 fail
Data6 00-ff: Upper 2 bytes of BLU No. 2 sensor 02: BLU sensor 1 fail, BLU sensor 2 normal
measured value 03: All fail
Data7 00-ff: Lower 2 bytes of BLU No. 2 sensor When the Data is 06
measured value Data1 00: No.1 luminance sensor is being used
BLU measured value Hex: 0000-ffff, Decimal: 0 - 65535 01: No.2 luminance sensor is being used
* CA210 measured value is entered through the
calibration procedure during final assembly. Default When the Data is 07
value is 0 before calibration. Data1 00: All temperature sensors fail
** It may not be supported, depending on the model. 01: Top normal, Bottom fail, Main fail
02: Top fail, Bottom normal, Main fail
03: Top normal, Bottom normal, Main fail
04: Top fail, Bottom fail, Main normal
05: Top normal, Bottom fail, Main fail
06: Top fail, Bottom normal, Main fail
07: All temperature sensors normal

When the Data is 08

Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][Data3][x]
Data1: Temperature of the top sensor area when the
set is powered off.
Data2: Temperature of the bottom sensor area when
the set is powered off.
Data3: Temperature of the main sensor area when
the set is powered off.

When the Data is 09

Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][x]
Data1 00-ff: Upper 2-byte of Fan Speed
Data2 00-ff: Lower 2-byte of Fan Speed
Fan Speed: Hex 0-20D0, Decimal 0-8400
** It may not be supported, depending on the model.
 CONTROLLING THE MULTIPLE PRODUCT 83

67. BLU Maintenance (Command: m t)

Select ON/OFF of BLU Maintenance.

ENGLISH
Transmission

ENG
[m][t][ ][Set ID][ ][Data][Cr]
Data 00: BLU Maintenance OFF
01: BLU Maintenance ON
** It may not be supported, depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]

68. Screen mute (Command: k d)

Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Turns the screen on.
01: Turns the screen off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
 To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
Make sure to read the Safety Precautions
before using the product. E N E RGY STA R i s a s et of p owe r-
Keep the Owner's Manual (CD) in an saving guidelines issued by the U.S.
accessible place for future reference. Environmental Protection Agency(EPA).
The model and serial number of the SET is
As an ENERGY STAR Partner LGE U. S. A.,Inc. has
located on the back and one side of the SET. determined that this product meets the ENERGY
Record it below should you ever need service. STAR guidelines for energy efficiency.

MODEL Temporary noise is normal when powering ON or

OFF this device.
SERIAL