Form 4-157e, 11-09
Sheet 2 of 6
PARTS DESCRIPTION LISTING
Index
Part Number Description
No.
A 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5)
B 69-1063-1 COVER, ASSEMBLY BACK DSP600 (See Sheet 5)
C 233-73-1-PPP POST, TWO CAMERA UPPER WELD (See Sheet 3)
D 56-64-1 CARIER, TWO CAMERA - ML (See Sheet 4)
E 125-412-1 SENSOR, HS200 RIGHT CAMERA ASSEMBLY (See Sheet 5)
OR 125-414-1 SENSOR, HS201 RIGHT CAMERA IBIS (See Sheet 5)
F 125-411-1 SENSOR, HS200 LEFT CAMERA ASSEMBLY (See Sheet 5)
OR 125-413-1 SENSOR, HS201 LEFT CAMERA IBIS (See Sheet 5)
G 11-1345-1 SUPPORT, DUAL POSITION, ADAPTOR MOUNT (See Sheet 3)
H 175-325-1 ADAPTOR, 10 INCH – 24 INCH DSP600/400 (Refer to form 4-110)
I 214-112-1 TARGET ASSEMBLY, REAR PLASTIC RIGHT-HAND (See Sheet 6)
J 214-113-1 TARGET ASSEMBLY, REAR, PLASTIC LEFT-HAND (See Sheet 6)
K 214-114-1 TARGET ASSEMBLY, FRONT, PLASTIC RIGHT-HAND (See Sheet 6)
L 214-115-1 TARGET ASSEMBLY, FRONT, PLASTIC LEFT-HAND (See Sheet 6)
PPP-Paint Code Required
A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
Form 4-157e, 11-09
Sheet 3 of 6
PARTS DESCRIPTION LISTING
Index
Part Number Description Qty.
No.
1 233-73-1-PPP POST, TWO CAMERA UPPER WELD 1
2 233-74-1 POST, TWO CAMERA LOWER (Consisting Of:) 1
3 233-71-1-PPP POST, TWO CAMERA LOWER WELD 1
4 39-80-3 CABLE, TWO CAMERA ML 1
5 34-190-2 KNOB, CARRIER COUNTER BALANCE CM 1
6 42-45-2 PLUG, FRICTION COUNTER BALANCE CM 1
7 74-270-2 SOCKET BUTTON HEAD CAP SCREW 5/16-18 X 1.00 INCH FULL-THREAD 1
8 77-20-2 WASHER, FLAT 5/16 INCH 2
9 162-35-2 ADHESIVE, THREAD LOCKING A/R
10 94-13-2 TIE, CABLE (Not Illustrated) 4
11 65-91-2 WEIGHT, HS ML 1
12 24-51-2 NAMEPLATE, HUNTER MODEL & PART (Not Illustrated) 1
13 24-54-2 NAMEPLATE, PATENT LABEL (Not Illustrated) 1
14 20-2326-1 KIT, TWO CAMERA ML HARDWARE (Consisting Of:) (Not Illustrated.) 1
15 75-695-2 TRUSS HEAD MACHINE SCREW - 10-24 X .75 INCH 4
16 74-11-2 HEX HEAD CAP SCREW 1/2-13 X 1.25 INCH GRADE 5, FULL-THREAD 4
17 74-270-2 SOCKET BUTTON HEAD CAP SCREW 5/16-18 X 1.00 INCH, FULL-THREAD 5
18 75-481-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X .50 INCH 12
19 75-408-2 SCREW, SELF-TAPPING 10-32 X .75 INCH 3
20 62-21-2 FOOT, PLASTIC 3
21 74-169-2 BOLT, ANCHOR 1/2 X 3 3/4 INCH 4
22 76-448-2 NUT, TINNERMAN U-TYPE #10-24 4
23 69-1297-3 COVER, COLUMN TWO CAMERA ML 1
24 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) 1
25 56-64-1 CARIER, TWO CAMERA-ML (See Sheet 4) 1
26 20-2375-1 HAWKEYE, ADAPTOR-SUPPORT, LIFT-MOUNT (Consisting Of:) (Not Illus.) 1
27 62-50-2 FOOT, 1/4 INCH RUBBER 1.25 INCH DIAMETER (For Lift Mnt.) (Not Illus.) 4
28 76-17-2 NUT, GRIP 1/4-20 (For Lift Mnt.) (Not Illus.) 4
29 75-728-2 HEX HEAD CAP SCREW, 1/4-20X1.25 INCH GRADE 5 (For Lift Mnt.) (Not Illus.) 4
30 76-477-2 NUT, 1/4-20 RECTANGULAR (For Lift Mnt.) (Not Illus.) 4
31 75-408-2 SCREW, SELF-TAPPING 10-32X.75 INCH 16
32 11-1345-1 SUPPORT, DUAL POSITION-ADAPTOR MOUNT (Consisting Of:) 4
33 11-1347 SUPPORT, DUAL POSITION MOUNT 1
34 62-50-2 FOOT, 1/4 INCH RUBBER 1.25 INCH DIAMETER 1
35 75-93-2 FLAT HEAD SOCKET CAP SCREW 10-32 X 1.00 INCH 1
36 76-61-2 NUT-KEPS 10-32 1
37 106-168-2 SLEEVE, RECTANGLAR 10 GAUGE 2
PPP-Paint Code Required
A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
Form 4-157e, 11-09
Sheet 4 of 6
PARTS DESCRIPTION LISTING
Index
Part Number Description Qty.
No.
1 56-64-1 CARIER, TWO CAMERA ML (Consisting Of:) 1
2 56-63-005 CARIER, TWO CAMERA-FRONT 1
3 14-1204-1 BRACKET, DUAL-ROLLER (Consisting Of:) 2
4 14-1203-005 BRACKET, DUAL-ROLLER-MOUNT 1
5 76-17-2 NUT, GRIP 1/4-20 2
6 75-452-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.50 INCH 2
7 77-67-2 WASHER, FLAT 1/4 INCH 4
8 113-275-2 BUSHING, 3/8 ID X 1/2 OD X 3/4 INCH LONG 2
9 111-127-2 ROLLER, REAR CONSOLE MT 2
10 75-481-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X .50 INCH 10
11 76-85-2 NUT, KEPS 1/4-20 10
12 75-617-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.00 INCH 6
13 135-13-2 PIN, DOWEL 3
14 113-275-2 BUSHING, 3/8 ID X 1/2 OD X 3/4 INCH LONG 3
15 111-127-2 ROLLER, REAR CONSOLE MOUNT 3
16 77-67-2 WASHER, FLAT 1/4 INCH 6
17 121-244-2 BLOCK, SHEAVE UPPER PULLEY CM 6
18 56-62-1-005 CARIER, TWO CAMERA-REAR 1
19 75-543-2 SCREW, SELF-TAPPING 8-32X.38 INCH 8
20 56-65-005 CARIER, TWO CAMERA-COVER-MOUNT 1
21 20-2326-1 KIT, TWO CAMERA ML HARDWARE (Consisting Of:) (Not Illustrated) 1
22 121-244-2 BLOCK, SHEAVE UPPER PULLEY CM 2
23 135-319-2 PIN, DOWELL .25 X 1.00 INCH 1
24 107-121-2 PULLEY, WIRE ROPE, CM 1
25 75-617-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.00 INCH 2
26 76-85-2 NUT, KEPS 1/4-20 2
27 75-617-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.00 INCH 1
28 76-85-2 NUT, KEPS 1/4-20 2
29 77-67-2 WASHER, FLAT 1/4 INCH 2
30 75-481-2 SOCKET BUTTON HEAD CAP SCREW 1/4-20 X .50 INCH 2
31 14-1205-005 BRACKET, HUB MOUNT 1
32 12-163-2 CLAMP, P CLIP 3/8 INCH ID RUBBER 3
33 76-17-2 NUT, GRIP 1/4-20 2
34 75-31-2 ROUND HEAD MACHINE SCREW 4-40X.38 INCH (For HS200ML Only) 4
35 76-22-2 NUT, HEX 4-40 (For HS200ML Only) 4
36 38-1069-1 CABLE, HS400FC CAMERA CONTROL TO BURNDY (For HS200ML Only) 1
37 38-784-3 CABLE ASSEMBLY, SHIELDED SENSOR (For HS200ML Only) 1
38 39-80-3 CABLE, TWO CAMERA ML REF.
39 75-446-2 SELF-TAPPING SCREW 8-32 X 3/8 INCH (Not Illus.) (For HS201ML Only) 4
40 67-667-1 BOX, USB HUB BOARD ASM (For HS201ML Only) 1
41 67-666-1 BOX, ASSEMBY USB HUB (For HS201ML Only) 1
42 69-1081-1 LID, ASSEMBY USB HUB (For HS201ML Only) 1
43 45-1023-1 PCA, VCS USB2 HUB (For HS201ML Only) 1
44 75-446-2 SELF-TAPPING SCREW 8-32 X 3/8 INCH (For HS201ML Only) 4
45 75-162-2 ROUND HEAD MACHINE SCREW 6-32 X .31 INCH (For HS201ML Only) 4
46 75-384-2 ROUND HEAD MACHINE SCREW 4-40 X 1.50 INCH LG (For HS201ML Only) 3
47 38-954-2 CABLE, USB 2.0 A/B 2 METER (Not Illustrated) (For HS201ML Only) REF
48 37-526-1 WIRE ASSEMBY, DSP600L EMITTER PWR (Not Illustrated) (For HS201ML Only) REF
49 38-957-3 CABLE ASSEMBY, USB+BURNDY (For HS201ML Only) 1
PPP-Paint Code Required
A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
Form 4-157e, 11-09
Sheet 5 of 6
PARTS DESCRIPTION LISTING
Index HS200 HS201
Part Number Description
No. (per side) (per side)
1 125-412-1 SENSOR, HS200 RIGHT CAMERA IBIS (Consisting Of:) 1
OR 125-411-1 SENSOR, HS200 LEFT CAMERA IBIS (Consisting Of:) (Not Illustrated) 1
OR 125-414-1 SENSOR, HS201 RIGHT CAMERA IBIS (Consisting Of:) (Not Illustrated) 1
OR 125-413-1 SENSOR, HS201 LEFT CAMERA IBIS (Consisting Of:) (Not Illustrated) 1
2 109-136-1 TRANSDUCER, DSP600 FRONT IBIS (Includes:) 1 1
3 37-523-1 WIRE ASSEMBLY, DSP600 EMITTER BOARD 1 1
4 45-1129-1 PCA, DSP600 750NM EMITTER SMT 1 1
5 75-324-2 SCREW. SELF-TAPPING 4-40 X 1/4 INCH 3 3
6 14-1127-1 BRACKET, 2 CAMERA SUPPORT RIGHT ASSEMBLY 1 1
OR 14-1126-1 BRACKET, 2 CAMERA SUPPORT LEFT ASSEMBLY (Not Illustrated) 1 1
7 75-698-2 SCREW, SELF TAPPING 8-32 TRILOB 3 3
8 121-240-2 BLOCK CAMERA MOUNT HS200 1 1
9 75-41-2 HEX HEAD CAP SCREW 1/4 - 20 x .38 INCH, FULL-THREAD 3 3
10 75-500-2 SCREW, SELF TAPPING 6-32 x 3/8 INCH 4 4
11 49-76-2 GASKET, CAMERA BOARD (For HS200 Only) 1
12 45-1193-1 PCA, HS400 CAMERA CONTROL (For HS200 Only) 1
OR 45-1013-1 PCA, USB2 CAMERA INTERFACE (For HS201 Only) 1
13 21-204-2 CONNECTOR .1 2 CIRCUIT JUMPER (Not Illustrated) (For HS200 Only) 1
14 38-1067-1 CABLE, HS400 CAMERA CONTROL TO EMMITER POWER (For HS200 Only) 1
15 24-54-2 NAMEPLATE, PATENT LABEL (Not Illustrated) 1 1
16 24-51-2 NAMEPLATE, HUNTER MODEL AND PART (Not Illustrated) 1 1
17 38-1068-1 CABLE, HS400 CAMERA CONTROL TO CAMERA CONTROL (HS200ML Only) 1
AND 38-1069-1 CABLE, HS400FC CAMERA CONTROL TO BURNDY (Not Illus.) (HS200ML Only) REF.
OR 38-954-2 CABLE, USB 2.0 A/B 2METER (Not Illus.) (HS201ML Only) 1
AND 37-526-1 WIRE ASSEEMBLY, DSP600L EMITTER POWER (Not Illus.) (HS201ML Only) 1
18 38-784-3 CABLE ASSEMBLY, SHIELDED SENSOR (See Sheet 4) (Not Illus.) (HS200ML Only) REF.
OR 38-957-3 CABLE ASSEMBLY, USB+BURNDY (See Sheet 4) (Not Illus.) (HS201ML Only) REF.
19 69-1061-2 COVER, CAMERA DSP600 1 1
20 69-1064-2 COVER, CAMERA CLEVIS DSP600 2 2
21 69-1063-1 COVER, ASSEMBLY BACK DSP600 (Consisting Of:) 1 1
22 69-1079-3 COVER, CAMERA BACK DSP600 1 1
23 69-1062-005 COVER, CAMERA PLATE 1 1
24 75-362-2 SCREW, SELF-TAPPING 6-32 X .25 INCH 4 4
25 20-2326-1 KIT, TWO CAMERA MANUAL LIFT HARDWARE (Consisting Of:) (Not Illustrated) 1 1
26 75-414-2 PAN HEAD MACHINE SCREW 8-32 X 3/4 INCH 4 4
27 75-441-2 SCREW, SELF-TAPPING 8-32 X .50 INCH 8 8
28 179-62-005 SHIELD, FRONT COVER DSP602 1 1
29 75-362-2 SCREW, SELF-TAPPING 6-32 X .25 INCH 4 4
30 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (Consisting Of:) 1
31 16-888-1-005 TUBE ASSEMBLY, CAMERA SUPPORT CM 1
32 178-33-1-005 COUPLER, CAMERA DSP600 WELD 2
33 74-59-2 HEX HEAD CAP SCREW 3/8-16 X .75 INCH, FULL-THREAD 2
34 77-65-2 WASHER, FLAT 3/8 INCH, SPECIAL 2
35 75-23-2 HEX HEAD CAP SCREW 1/4-20 X .50 INCH FULL-THREAD 8
36 77-67-2 WASHER, FLAT 1/4 INCH 10
37 75-241-2 SOCKET SET SCREW 1/4-20 X 3/4 INCH, OVAL POINT 8
38 75-29-2 HEX HEAD CAP SCREW 1/4-20 X .75 INCH, FULL-THREAD 2
PPP-Paint Code Required
A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
Form 4-157e, 11-09
Sheet 6 of 6
PARTS DESCRIPTION LISTING
Index Front Rear
Part Number Description
No. Targets Targets
1 214-115-1 TARGET ASSEMBLY, FRONT PLASTIC LH (Consisting Of:) 1
OR 214-114-1 TARGET ASSEMBLY, FRONT PLASTIC RH (Not Illustrated) 1
2 214-112-1 TARGET ASSEMBLY, REAR PLASTIC RH (Consisting Of:) 1
0R 214-113-1 TARGET ASSEMBLY, REAR PLASTIC LH (Not Illustrated) 1
3 105-376-3 HOUSING-FRONT WITH BUMPER 1
4 105-380-3 HOUSING-REAR WITH BUMPER 1
5 97-485-2 SHAFT, DSP600 TARGET 1 1
6 77-26-2 WASHER, FLAT 3/8 INCH 1 1
7 76-34-2 NUT, JAM 3/8-24 1 1
8 51-1714 PLATE, BACKUP FRONT 1
9 51-1715 PLATE, BACKUP REAR 1
10 75-573-2 FLAT HEAD SHEET METAL SCREW 10-16 X .5 INCH 4 4
11 214-109-1 TARGET ASSEMBLY, FRONT 1.86 1
12 214-104-1 TARGET ASSEMBLY, REAR 2.22 1
13 77-276-2 WASHER, SPRING CURVED #10 3 3
14 76-263-2 NUT, LOCK 10-32 NYLON INSERT 3 3
15 105-369-2 HOUSING, LEVEL TARGET 2 2
16 128-970-2 DECAL, DSP400 TARGET WARNING (Not Illustrated) 1 1
17 221-631-2 TOOL LEVEL, DSP400 TARGET 1 1
PPP-Paint Code Required
A/R-As Required
REF-Reference
11250 HUNTER DRIVE BRIDGETON, MO 63044
