2/24/23, 4:40 PM SIS 2.
2019/03/22 Track Roller (Single Flange) (M0118011-00)
SMCS - 4180 i05758150
PSP
202 -0009
08: 3/02/2 4B8E
4
M0 0:31+ 4
1
© 2 1801 08:00
023 1
Cat
erp
Illustration 1
illa g03655140
Typical example
r In
Table 1
Item Qty Part
c.
Specification Description
Surfaces must be clean and free of paint and protective coating before
1 - -
assembly.
The rubber toric seals and all the contacting surfaces must be clean and dry
176-5332 at assembly. Before assembly, apply a thin layer of 6V-4876 Lubricant to the
2 2 Duo-Cone contacting surfaces of the metal seal rings. The seal rings must be assembled
Seal Gp square. The rubber toric seal should not bulge and the rubber toric seal
should not twist.
9W-2146 Apply blue Loctite 242 to threads.
3 1
Plug Torque to 25 ± 3 N·m (221 ± 27 lb in).
442-1643
4 2 O-Ring Lubricate the bore with the lubricant that is being sealed.
Seal
442-1643
4 2 O-Ring Lubricate the bore with the lubricant that is being sealed.
Seal
End play for the track roller shaft(1):
- - - Minimum end play is 0.25 mm (0.010 inch).
Maximum end play is 1.25 mm (0.049 inch).
(1)
Applicable only for the part number 529-7106
https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Track%2520Roller%2520(Single%2520Flange)%2520(M0118011-0… 1/2
