Telephone HT60

User Manual

IMHT60_V3_02112016.indd 1 02/11/16 11:22

 CONTENTS Main feature list

The following items are included in the package of • Caller ID display, supports FSK and DTMF
JACOB JENSENTM Telephone HT60: • Caller ID number disappears after 30 seconds
• Hearing aid compatible handset
1. Telephone handset • Data port - for connecting MODEM, fax, etc.
2. Base station • Service buttons - can be programmed and kept forever
3. Handset coiled cord • Volume buttons to adjust the speaker and
4. Table stand handset volume.
5. Line cord • FLASH - The default is 100ms. Can be set from 100ms
to 600ms according to the network specifications.
• REDIAL button redials the last number dialled
• PROG button – programmmes the service buttons
• MUTE button
1. 2. 3.
• LED indicator for “Line in use (blue)” and “Mute (red)”
• R button – Signalling the PBX to activate the flash
function. The default is 100ms.
• Speaker button with indicator
• Message waiting and ringing indicator
• Busy tone disconnects automatically
• Programme service button with R.P master cloner and
handheld cloner.
• Pre-dial function (32 at most), which can be
automatically dialled when you pick up the handset.
• Room number shown in display
• Desktop and wall mounting

4. 5.

IMHT60_V3_02112016.indd 2 02/11/16 11:22

 CONTROLS AND FUNCTIONAL KEYS
9. 8.

1.

2.
11.

3.

4.

5. 6. 10.
Base unit - front 7. Base unit - rear
1. LCD screen display 8. Telephone line jack
2. 8 functional keys 9. Data port
3. 12 numerical keys 10. Handset cord jack
4. Service buttons 11. Holes for wall mounting
5. Indicator (LED) - for “Line in use (blue)” and “Mute (red)”
6. Message waiting indicator
7. Hands-free microphone

Features Description of the functional keys

MUTE - Microphone switch (handset)
R - Signalling the PBX to activate the flash function
The default is 100ms
- To lower or increase the speaker and handset volume
PROG - For programming
FLASH - Flash button
REDIAL - Redial button
- For on hook dialling (speaker phone mode)
- Key for special services
- Key for special services
3

IMHT60_V3_02112016.indd 3 02/11/16 11:22

 UK

Congratulations on your new JACOB JENSENTM Telephone A.2. Faceplate installation

HT60.

The telephone is designed in Denmark by Jacob Jensen,

whose products have gained international recognition for
their original, simple and classic design. Jacob Jensen has
received about 100 prizes from around the world and has
19 products included in The Design Study Collection and
The Design Collection of The Museum of Modern Art in
New York.

Telephone HT60 is a FSK/DTMF caller ID telephone. In order

to activate this feature, please contact your telecoms service
provider. Please read this guide before use and keep it handy
for future reference.

A. Installation

A.1. Base installation – table stand

123 123 123 123

123 123 123 123

B. HOW TO USE THE TELEPHONE

Receiving a call
Pick up the handset or press .

Making a call
Disassembly: Pick up the handset or press – then dial the telephone
number.

Adjust speaker and handset volume

Press the volume buttons to lower or increase
the volume of speaker and handset. When you hang up,
the volume of the handset will return to low level and the
speaker volume will keep the current level.

Handset and speaker phone mode exchangeable

1. From handset to speaker phone: Just press and put
the handset back to the cradle.
2. From speaker phone to handset : Just lift the handset.

To redial the last number dialled

Press REDIAL to dial the last number dialled. After five minutes
the number will disappear automatically.

IMHT60_V3_02112016.indd 4 02/11/16 11:22

 Mute Function Setting Date and Time
During the call, press MUTE once to stop the transmission for In on-hook mode: Press 11 MMDDHHmm .
handset and speaker – the mute LED will light up. Press MUTE MM: month (01-12)
again to resume the call – the mute LED will turn off. DD: date (01-31)
HH: hour (00-23)
Service buttons and MWI mm: minutes (00-59)
1. To programme the service buttons or MWI: In on-hook
mode, press PROG + programming number + PROG + Message Waiting Indicator (MWI)
Service button. If you need, you can insert FLASH or R It is compatible with high voltage neon/90V and Lucent
button. low voltage system. Other MWI signalling systems must be
In on-hook mode, press the relevant service button to see confirmed by the factory and implemented in production.
the programmed number. The MWI will flash if there is a message. Pick up the handset
2. In on-hook mode: Pick up the handset or press , then or press the speaker , then press the MWI to retrieve the
press the certain Service button, the programmed number message.
will be dialled automatically.
3. To delete the programmed number: In on-hook mode, The MWI is also a ringing indicator, which will flash if there
Press PROG + PROG + Service button or MWI. If you need, is a call or a message.
you can insert FLASH or R .
Busy tone disconnect automatically
Set room number If the handset is not placed on the cradle after a phone call,
In off-hook mode, press PROG + room number + PROG + the telephone can automatically switch to on-hook mode
or . The room number will appear in the left side and the line will connect accordingly.
of the display.
Data port
In off-hook mode, pressing 13 0987654321 The data port can be used to connect computer, fax,
will delete all programmed numbers and the room number. extension, etc.

Caller ID Programming the service buttons by Cloner

When receiving caller ID information the telephone can 1. Enter actively Remote Programming Status : Off hook
recognize the format FSK & DTMF. This information will be status, press for 5s of the base, the phone will send 3
stored automatically. If you need to change the format, you dialing tones and the mute indicator flashes 3 times.
have to disconnect and re-power again. 2. Escape actively Remote Programming Status: Off hook
status, press # for 5s of the base, the phone will send 3
The caller ID number will disappear within 30 seconds in dialing tones and the mute indicator flashes 3 times
order to protect guest’s privacy. There are indicators for New
call, Repeat call, Secret call, Message and so on. It can store Note:
48 incoming calls. The displayed number is up to 16 digits. - The phone will automatically escape the remote
programming status if the phone is successfully
If the format is FSK, the date and time will be auto updated. programmed.
In DTMF mode, all settings won’t be changed. Furthermore, - Pressing the Volume button or back to on-hook status can
the DTMF signal only includes incoming phone calls and stop the programming work.
doesn’t include date and time.

IMHT60_V3_02112016.indd 5 02/11/16 11:22

 C. INSTALLATION ATTENTION & MAINTENANCE F. EC declaration of conformity

The phone has been manufactured using the very latest Hereby Bittel declares that this equipment
technology and the highest quality components and (Telephone HT60, type JJ HT60) is in compliance with
workmanship, under ISO9001 quality control procedures. the essential requirements and other relevant
It can be relied on to provide many years of trouble-free provisions of Directive 2014/53/EU.
service, especially if these simple tips are followed:
G. JACKS
• Handle with care, avoiding hard knocks and shocks.
• Do not expose this product to dust, strong sunlight, Use RJ11C USOC standard modular jacks.
humidity, high temperature, or mechanical shock.
• Do not use corrosive or abrasive cleansers on this H. WARRANTY
product. Keep the unit dust free by wiping it with
a soft, dry cloth. This product is warranted for a period of 12 months from the
• Do not tamper with or attempt to modify the phone, date of purchase against faulty materials or workmanship.
it would make it unsafe to use. Should any service If during this period a defect arises, we may repair or
difficulties or faults be encountered, the following replace the product, at Bittel’s discretion, provided that:
list may help you identify and remedy problems. In
many cases, however, it may be necessary to call the 1. The product has not been used for any purpose other than
distributor from whom you purchased it. normal use.
2. Unauthorized product repair or modifications have not
D. TROUBLESHOOTING been attempted.
3. The product has never been used in a harsh or corrosive
1. No dialing tone environment.
• Check the telephone network 4. No damage in transit.
• Check the connection of handset cord and straight
line cord THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL
2. No ringing or no continuous ring RIGHTS. THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH
• Check the telephone line VARY FROM JURISDICTION TO JURISDICTION.
• Check the quantity of parallel phone set
3. Noise during talk This warranty is only valid for merchandise purchased from
• Check the telephone line the authorized dealers authorized by Bittel or the licence
• Check the handset cord owner.

E. FCC APPROVAL I. FCC WARNING

Complies with Part 68 of the FCC rules. On the bottom of this This device complies with part 15 of the FCC Rules. Operation
telephone is a label that contains, among other information, is subject to the following two conditions: (1) This device
the FCC registration number and the ringer equivalence may not cause harmful interference, and (2) this device must
number (REN) for this telephone. If requested, you must accept any interference received, including interference that
provide this information to the Telephone Company. may cause undesired operation.

IMHT60_V3_02112016.indd 6 02/11/16 11:22

 J. CONTACT information K. Environmental concerns and disposal

Shandong Bittel Intelligent Technology Co., Ltd. Electric and electronic appliances contain materials,
Telephone: (86) 633-2212119/2212113 components and substances that can be damaging to
Internet: www.bittelgroup.com, www.hotelphone.com people’s health and to the environment, if the waste is not
Email: info@bittelgroup.com disposed of correctly.

Address: Shandong Bittel Intelligent Technology Co., Ltd. Electric and electronic appliances are marked with a crossed-
No. 1 Rizhao North Road, Rizhao, out wheelie bin symbol as illustrated below. It indicates that
Shandong, 276800, China electric and electronic appliances are banned from being
disposed of as general household waste, and have to be
Service center North America: collected separately.
Bittel Technology Inc.
1722 Little Orchard Street San Jose,California 95125 USA Please ask you dealer about current means of disposal.
Telephone: 1-888-9-BITTEL or 1-408-298-8206

Copyright © 2013 Bittel Inc. All rights reserved.

Produced in licence from:

Bell Xpress A/S

Telephone: (45) 70 22 60 33 - The contents of this manual are subject to change without
Internet: www.bellxpress.dk notice.
Email: mail@bellxpress.dk - The manufacturer and its suppliers accept no liability
whatsoever for any damage, expense, loss of profits or any
Address: Sletvej 50R other damage incurred as a result of using this product.
DK-8310 Tranbjerg J, Denmark
IMHT60_V3.02112016

IMHT60_V3_02112016.indd 7 02/11/16 11:22

 Product by: Bell Xpress A/S · www.bellxpress.dk

www.jacobjensen.com

Generation to generation...
8

IMHT60_V3_02112016.indd 8 02/11/16 11:22