DAYSENSOR

DYN-200 Dynamic torque sensor

Features:
·Still torque can be measured, with the
rotational torque
·Display the current measured torque value
and the speed value in real time
·The current power value can be calculated
directly
·Support RS485 communication and support
active upload protocol
·Communication rates are up to 500 or 1,000
times per second
· This sensor supports the simultaneous
output of the transmission current and
the transmission voltage
·The sensor comes with a OLED display with
a resolution of 128 * 64
·Simple calibration, zero clearance, and
filtering can be performed
·Allow a sensor overload of 200%
·Above 1 / 1000 accuracy, excellent
zero-point stability

qualification
range N.m ±20000
Speed range Rpm ≤15000
Speed signal Pulse / turn 120/60/10
Zero point output %F.S. ±0.05
nolinear %F.S. 0.1
lag %F.S. 0.5
repetitiveness %F.S. 0.05
creep %F.S.(30 min) 0.03
Temperature sensitivity drift %F.S./10℃ 0.05
Zero temperature drift %F.S./10℃ 0.05
response time ms 0.6(50% reaction speed)
response frequency kHz 1
picking rate Secondary / second 550/1200
indication range -99999-99999
Maximum torsion angle 2.60x10rad(0.149°)
inertia moment Kgcm 0.38
Rotor vibration natural
kHz 19.4
frequency
torsional constant Nm/rad 3.85x10
material quality stainless steel
Year stability /year 0.3%
load resistance kΩ ＞2
supply voltage V DC 24
DAYSENSOR
source current A 0.2
Consumption of current mA <150
working temperature ℃ -10-50
Working humidity RH 0-85%
Safety overload 150%
Cable line specifications Φ5*3m
Cable limit tension N 98

1) High temperature sensors are available, with a maximum operating temperature of 150℃.
2) High impedance sensors can be provided with an output impedance of 1000 Ω.

Product Size Fig

Range（N.m） 0.1 0.3 0.5 1 2 5

Range（N.m） 10 20 30 50 100

Range（N.m） 200 300

Range（N.m） 500 600 800

Range（N.m） 1000 2000 3000 5000

Range（N.m） 10000 20000

force diagram

Load Device | Coupling | Sensor | Coupling | Power Device

The bottom is fixed