CABLE MANAGEMENT
PRODUCT CATALOGUE
VERSION 1.0
ISSUE DATE: 23 OCTOBER 2015
SUMMARY:
THIS DOCUMENT LISTS THE CABLE LADDERS, TRAYS AND ASSOCIATED BRACKETS OFFERED BY ICS INDUSTRIES.
About Us
ICS Industries offers a range of unique products for the support, maintenance and
upgrade of existing equipment infrastructure and ordinary stand-alone solutions.
Access to all parts and equipment is available through our Shop Division.
CONTACT DETAILS
Address: ICS Industries Pty Ltd
309 Settlement Road
Thomastown VIC 3074
Phone: (03) 9474 2008
Fax: (03) 9465 5277
Email: shop@icsindustries.com.au
Shop Operations Manager: Glenn Hartney
Shop Sales & Admin Support: Sue Ings and Hai To
SHOP OPERATING HOURS (MON-FRI)
Office: 8:30am - 4:30pm AEDT
Warehouse: 8:30am - 3:30pm AEDT
2 V 1.0 | shop@icsindustries.com.au | 1800 010 027 | ICS INDUSTRIES PTY LTD
Cable Management
ICS 150 CABLE LADDER 3M LENGTH
■■ Galvanised steel construction
■■ 3000mm L x 150mm W
ICS PART NO:
LDX0150
ICS 300 CABLE LADDER 3M LENGTH
■■ Galvanised steel construction
■■ 3000mm L x 300mm W
ICS PART NO:
LDX0300
ICS 450 CABLE LADDER 3M LENGTH
■■ Galvanised steel construction
■■ 3000mm L x 450mm W
ICS PART NO:
LDX0450
ICS SPLIT LENGTH CABLE LADDER
■■ Cable ladder is supplied in two pieces and is fixed to ceiling
with rungs facing down. Designed in 2 x sections for full
pre-assembly of combiners, tails, etc, on ladder prior to
installation. Heavy Duty Brackets to support additional
weight of equipment.
Kit includes:
- 2 x Cable ladder - half length - 4 x Hex head fittings - Type 17
- 2 x Wall bracket - full width - 4 x Self drilling hex heads
- 2 x Ceiling bracket - heavy duty - 4 x Fixing bolts
■■ Various sizes available:
ICS PART NO: LDX60024SLK – 2.4m shelter
ICS PART NO: LDX60030SLK – 3.0m shelter
ICS PART NO: LDX60036SLK – 3.6m shelter
ICS INDUSTRIES PTY LTD | 1800 010 027 | shop@icsindustries.com.au | V 1.0 3
Cable Management
LADDER HOOP 600
■■ Used for securing cable ladder to hang from structures above
■■ Suitable for 600mm wide cable ladders only
ICS PART NO:
LDX012006
LADDER HOOP 300
■■ Used for securing cable ladder to hang from structures above
■■ Suitable for 300mm wide cable ladders only
ICS PART NO:
LDX012012
LADDER HOOP 450
■■ Used for securing cable ladder to hang from structures above
■■ Suitable for 450mm wide cable ladders only
ICS PART NO:
LDX012008
CABLE TRAY 100MM
■■ 100mm W x 750mm H
■■ Galvanised steel construction
ICS PART NO:
■■ Integrated mounting support
LDX105001
LADDER BRACKET WALL-TYPE LONG
■■ Used for securing cable ladder to walls
■■ Suits ICS cable ladders
ICS PART NO:
LDX012018
4 V 1.0 | shop@icsindustries.com.au | 1800 010 027 | ICS INDUSTRIES PTY LTD
Cable Management
ICS LADDER BRACKET WALL-TYPE
■■ Used for securing cable ladder to walls
■■ Suits ICS cable ladder
ICS PART NO:
LDX012013
LADDER BRACKET LENMIC H-TYPE
■■ Used for joining the end of one length of cable ladder to
the side of another cable ladder
ICS PART NO:
■■ Suits “12B” Ladder with C-Section rails
■■ Includes 1 x (M8 x 16mm) bolt LDX012004
■■ 1 x (M8 x 80mm) bolt and nut
LADDER BRACKET LENMIC WALL TYPE
■■ Used for securing cable ladder to walls
■■ Suits “12B” ladder with C-Section rails
ICS PART NO:
■■ 2 x Holes to wall and 1 x threaded to ladder
■■ Includes 1 x (M8 x 16mm) bolt LDX012002
LADDER BRACKET LENMIC W-LONG TYPE
■■ Used for securing Cable Ladder to wall
■■ Suits “12B” ladder with C-Section rails
ICS PART NO:
■■ 2 x Holes to Wall and 2 x threaded to ladder
■■ Includes 2 x (M8 x 16mm) Bolt LDX012005
LADDER BRACKET LENMIC EARTH TYPE
■■ F or attaching Copper Earth Strap to Cable Ladder - end of one
length to side of another
ICS PART NO:
■■ Suits “12B” ladder with C-Section rails
■■ Includes 1 x (M8 x 16mm) bolt LDX012003
ICS INDUSTRIES PTY LTD | 1800 010 027 | shop@icsindustries.com.au | V 1.0 5
Cable Management
CABLE TRAY LENMIC
■■ 5 x various lengths required of wall mounted cable tray to run
from BTS to DC equip as per diagram. 1 x each of the 5 parts
are required for typical shelter configurations.
■■ Various sizes available:
ICS Part No: LDX1010 – 100 x 390mm
ICS Part No: LDX2010 – 200 x 450mm
ICS Part No: LDX2012 – 200 x 735mm
ICS Part No: LDX2024 – 200 x 1400mm
ICS Part No: LDX2016 – 200 X 1500mm
ICS Part No: LDX2018 – 200 X 1560mm
ICS Part No: LDX2020 – 200x 1600mm
ICS Part No: LDX2022 – 200 x 1885mm
CABLE TRAY STAND OFF BRACKET 50MM
■■ Galvanised steel metal construction
■■ Can be easily fixed to the stand off feet of any size cable tray
ICS PART NO:
to extend the tray height to 50mm.
■■ This design spaces the tray off the wall or ceiling to allow LDX0013
conduits to be run underneath.
CABLE TRAY STAND OFF BRACKET
■■ Galvanised steel metal construction
■■ Suits 200mm cable tray
ICS PART NO:
LDX0014
BTS 3900L TOP L BRACKET
■■ Attaches to the top rear of BTS3900L unit to secure to wall
ICS PART NO:
HAX0153
6 V 1.0 | shop@icsindustries.com.au | 1800 010 027 | ICS INDUSTRIES PTY LTD
Cable Management
GLAND PLATES
■■ 3mm thick, complete with Trim Kit
■■ ICS Part No: HMX0001 – O-Type 460mm H x 660mm W
ICS PART NO:
■■ ICS Part No: HMX0002 – TL-Type 560mm H x 560mm W
■■ ICS Part No: HMX0003 – TS-Type 370mm H x 370mm W VARIOUS
■■ ICS Part No: HMX0004 – V-Type 260mm H x 660mm W
■■ ICS Part No: HMX0009 – Aluminium 660mm H x 660mm W
FLOOR ENTRY HOUSING
■■ Includes internal gland housing
■■ Powder-coated in Surf Mist
ICS PART NO:
■■ Comes with aluminium gland plates
■■ Suitable for corner floor mount BHWINTGLNDHSG
ICEW-2 GLANDPLATE 600 X 400
■■ Includes glands & penetrations to support 48 x Andrew
LDF450 (Cable ø15-16mm outside diameter{OD})
pre-terminated tails. Markings for location of 6 x HFDC and ICS PART NO:
2 x Other cables. Gland plate to be cut on site for HFDC &
HMM0005
Other cables. Glands not included for HFDC or other cables.
*If cables being used are not OD15-16mm then different
INSERTS will be required.
SPLIT CABLE GLAND KIT X 1 KEL – 16/8
WITH 6 X Ø 15-16MM INSERTS & PLUGS
■■ Additional cable glands are available as spare parts ICS PART NO:
HMK0008
SPLIT CABLE GLAND KIT X 6 KEL – 16/8
WITH INSERTS & PLUGS
■■ Additional cable glands are available as spare parts ICS PART NO:
HMM0006
ICS INDUSTRIES PTY LTD | 1800 010 027 | shop@icsindustries.com.au | V 1.0 7
Cable Management
ICEW-3 GLANDPLATE 600 X 400 KIT
■■ Includes 4 x 8-way split glands & penetrations to support
32 x ø13 -14mm pre-terminated tails and 2 x Blanking plates.
Markings for location of 6 x HFDC and 2 x Other cables. Gland ICS PART NO:
plate to be drilled on site for HFDC & Other cables, glands not
HMM0008
included. Additional split cable glands are available as spare parts.
SPLIT CABLE GLAND KIT X 1 KEL – 16/8
WITH 6 X Ø 13 - 14MM INSERTS &
2 X PLUGS ICS PART NO:
■■ Complete with mounting bracket and screws
HMK0013
HANGER COMBINER COM2 BRACKET
FOR CABLE LADDER
■■ 2 x piece bracket supports 1 x combiner hung from cable ICS PART NO:
ladder: COM2 - E11F01P56, Commscope, DTPX
700/850/900 DC BYP LDX0006
HANGER COMBINER COM1 (7-96/18-26)
BRACKET FOR CABLE LADDER
■■ Supports 1 x combiner hung from cable ladder: ICS PART NO:
COM1 - E15V90P44 - SINGLE, Commscope,
Lowband 380-960 + Highband 1710-2700 combiner LDX0007
HANGER COMBINER COM3 (18-21)
BRACKET FOR CABLE LADDER
■■ 2 x Piece bracket supports 1 x combiner hung from ICS PART NO:
cable ladder: COM3 – E15V90P43, Commscope,
DQPX 1.8/2.1/2.3/2.6 DC BYP LDX0008
8 V 1.0 | shop@icsindustries.com.au | 1800 010 027 | ICS INDUSTRIES PTY LTD
Cable Management
HANGER COMBINER COM1 BRACKET (V)
TO SUIT KAELUS DBC0055F1V25-2
■■ Supports 1 x combiner hung from cable ladder ICS PART NO:
■■ The DBC0055F1V x Dual Band Combiner combines the
698-960 MHz and 1710-2700 MHz frequency bands LDX0010
HANGER COMBINER TRI1 BRACKET
SET (V) TO SUIT KAELUS TBC0076F5V23-2
■■ 2 x Piece bracket supports 1 x combiner hung from cable ICS PART NO:
ladder. The TBC0076 triplexer combines 900, 1800 and 2100
MHz signals onto a single output LDX0011
HANGER COMBINER COM4 BRACKET
SUITS KAELUS DBC002/F3V23-2
■■ 3 x Piece bracket to support 1 x dual band combiner hung ICS PART NO:
from cable ladder
■■ The Kaelus DBC0021 combiner provides diplexing of 1800 LDX0012
and 2100MHz signals wherever both signals are required
on a single output
HANGER COMBINER TO SUIT KAELUS
DBC0038F3V3-1 UMTS2100
■■ 2 x piece galvanised steel hanger brackets (x 2) ICS PART NO:
■■ Suitable for Kaelus DBC0038F3V3-1 combiner unit
LDX0015
900MM COMMSCOPE (SBC)
(E15Z55P02) HANGER BRACKET
■■ 2 x piece galvanised steel bracket supports ICS PART NO:
■■ Suitable for 900 Commscope SBC (E15Z55P02)
LLC900MHz TYPE A LDX0016
ICS INDUSTRIES PTY LTD | 1800 010 027 | shop@icsindustries.com.au | V 1.0 9
HEAD OFFICE
309 Settlement Road, Thomastown VIC 3074
BRANCH OFFICES
46 Egerton Street, Silverwater NSW 2128
28 Duntroon Street, Brendale QLD 4500
3 Sandra Place, Welshpool WA 6106
57 Orsmond Street, Hindmarsh SA 5007
PH 1800 010 027
EMAIL ics@icsindustries.com.au
WEB www.icsindustries.com.au
