harman kardon Model DVD

47

DVD/CD/CD-R/CD-RW/VCD MP3 Player

Preliminary Service Manual

- Contents SERVICE PRECAUTIONS..2 BASIC SPECIFICATIONS...5 PACKAGE (120V)........6 FRONT PANEL CONTROLS..7 INFORMATION DISPLAY...8 REMOTE CONTROL...9 REAR PANEL CONNECTIONS...12 CONNECTIONS/SETUP..........13 TEST SCREEEN...............15 PLAYBACK BASICS..16 BASIC TROUBLESHOOTING GUIDE18 EXPLODED VIEW (120v).19 DISASSEMBLY PROCEDURE (120/230v)....20 BLOCK DIAGRAM.....22 ELECTRICAL PARTS LIST (120v) .23 PCB DRAWINGS..................39 SCHEMATICS....42 WIRING DIAGRAM47

harman/kardon, Inc. 250 Crossways Park Dr. Woodbury, New York 11797

DVD 47 TECHNICAL SPECIFICATIONS

Applicable Disc: Disc formats: 5-inch (12cm) or 3-inch (8cm) DVD-Video, DVD-Audio, standard-conforming DVD-R, DVD+R, DVD-RW, DVD+RW, SACD, VCD, CD, CD-R, CD-RW or MP3 discs Region code: DVD Video disc with Code 1 or 0 only DVD-Layers: Single side/single layer, single side/dual layer, dual side/dual layer Audio formats: DVD-Audio MLP lossless, SACD 2-channel or multichannel, Linear PCM, MPEG, Windows Media 9, Dolby Digital or DTS Audio discs Still-image format: JPEG NTSC Video: 480p, 720p, 1080i HDMI Version 1.0-compliant HDCP Version 1.1-compliant 1V p-p/75 ohms, sync negative polarity Y/Luminance: 1V p-p/75 ohms, sync negative polarity C/Chrominance: 0.286V p-p Y: 1V p-p/75 ohms, sync negative polarity Pr: 0.7V p-p/75 ohms Pb: 0.7V p-p/75 ohms Analog Audio Output: Frequency Response: 2V rms (1kHz, 0dB) DVD (Linear PCM): 2Hz 22kHz +0/0.5dB (48kHz sampling) 2Hz 44kHz +0/1.5dB (96kHz sampling) 2Hz 88kHz +0/0.5dB (192kHz sampling) CD: 2Hz 20kHz +0/0.5dB SACD: 2Hz 100kHz +0/0.5dB 105dB (A-weighted) DVD: 100dB (18-bit)/105dB (20-bit) CD/DVD: 96dB (16-bit) DVD/CD: 0.0025% Below Measurable Limits 110240VAC/5060Hz 1 Watt (On/Standby)/13 Watts (Max) 2" x 17-3/10" x 11-1/4" (50mm x 440mm x 285mm) 6 lb (2.7kg) 5" x 14-3/8" x 20" (127mm x 365mmx 508mm) 8.8 lb (4kg)

Video Signal System: HDMI Output:

Composite Video Output: S-Video Output: Component Video Output:

Signal/Noise Ratio (SNR): Dynamic Range: THD/1kHz: Wow & Flutter: AC Power: Power Consumption: Dimensions (H x W x D): Weight: Shipping Dimensions (H x W x D): Shipping Weight:

Depth measurement includes knobs and connectors. Height measurement includes feet and chassis. All specifications subject to change without notice. Harman Kardon, Harman International and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated. Dolby, Pro Logic and the double-D symbol are registered trademarks of Dolby Laboratories. Confidential Unpublished Works. 1992-1997 Dolby Laboratories, Inc. All rights reserved. Manufactured under license from Dolby Laboratories. DTS and DTS-ES are registered trademarks of DTS, Inc. Kodak and Photo CD are trademarks of Eastman Kodak Company. Microsoft, Windows Media, HDCD and High Definition Compatible Digital are registered trademarks of Microsoft Corporation in the United States and/or other countries. SACD is a trademark of Sony Electronics Inc. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

38

TECHNICAL SPECIFICATIONS

1. Instruction manual ass'y - Accessories

1 2 3

DVD 47 PACKAGING & ACCESSORIES

1

2. Package Drawing

DVD47

MANUAL ASS'Y

6
POLY BAG CARD WARRANTY HARMAN IMAGE BROCHURES

REMOCON ASS'Y

6
3
SNOW PAD

3
MANUAL INSTRUCTION OWNER'S MANUAL

SNOW PAD

SHEET, IMPORTANT

BATTERY ASS'Y

SNOW PAD

DVD47 SET
5
OUTER CARTON BOX ,OUT CARTON

CORD PIN(3P, W/R/Y)

CABLE,S-VHS(1.5M)

CORF ,JACK(MONO)1200MM

10

11

12

CORD PIN(3P, W/R/Y)

CABLE, HDMI(2M)

STAPLE

NO 1 2 POLY BAG

DESCRIPTION

PARTS NO. CPB1061Y

Q,ty 1

CARD WARRANTY

CQE1A172X HQE1A273Z CQE1A169Z CQX1A1050Z CABR03P CJS4S004Z CJS0I006Z CJS9D002Z CJA2A085Z CJS8T001Z KPL0905

1 1 1 1

3 HARMAN IMAGE BROCHURES 4 SHEET, IMPORTANT 5 6 BATTERY 7 CORD,PIN(3P,W/R/Y) 8 9 10 11 12 CABLE,S-VHS(1.5M) CORD,JACK(MONO)1200MM AC CORD CABLE,HDMI(2M) STAPLE 1 1 1 2

NO 1 2 3 4 5

DESCRIPTION MANUAL ASS'Y

DVD47 SET

PARTS NO. C
DVD 47 DVD27SET

Q,ty 1 1 2 1 1 1

OWNER'S MANUAL INSTRUCTION MANUAL

SNOW,PAD SNOW,PAD
DVD 47 OUTER CARTON BOX,OUT CARTON

CPS1A714 CPS1A715 CPG1A798X CARTDVD47

6
1 3

REMOCON ASS'Y

DVD 47

JPEG VCD DVD WMA AUDIO/VIDEO Open/Close

MP3

PROG RANDOM A B TITLE TRACK

REPEAT CHAP

1 ALL PBC

HOUR

V. OFF TEST

MIN

FRONT-PANEL CONTROLS
P SCAN . SEC

DVD 47

AUDIO/VIDEO

Open/Close

12

3 4 5 6 7 89

NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com.

0 Power Indicator 1 Power On/Off (Standby) 2 Play 3 Pause

4 Stop 5 Skip/Search Reverse 6 Skip/Search Forward 7 Remote Sensor

8 Display Dimmer 9 Disc Drawer ! Open/Close @ Information Display 8 Display Dimmer: Press this button to reduce the brightness of the Information Display @ by 50% or to turn the display off completely in the following order: FULL BRIGHTNESS HALF BRIGHTNESS OFF FULL BRIGHTNESS. ) Disc Drawer: This drawer is used to hold the discs played in the unit. Be certain to seat all discs carefully within the recess in the drawer. Do not press down on the drawer when it is open, to avoid damage to the player. When the drawer is left open with no activity for 5 minutes, it will automatically close to prevent dust or dirt from entering the component, and to prevent accidental damage. If a disc is present, the DVD 47 will immediately begin playback. ! Open/Close: Press this button to open or close the disc tray. @ Information Display: The Information Display provides status information on the player and the disc being played through a series of specific indicators and messages that appear in the display. See page 10 for more information on the display.

1 Power Indicator: This indicator lights amber when the unit is connected to an AC power source, but is not turned on. When the unit is on, the indicator lights blue. 1 Power On/Off (Standby): Press the button once to turn the DVD 47 on. Press it again to put the unit in the Standby mode. 2 Play: Press to initiate playback or to resume playback after the Pause Button 3K has been pressed. 3 Pause: Press this button to momentarily pause playback. To resume playback, press the button again. If a DVD is playing, action will freeze and a still picture will be displayed when the button is pressed. 4 Stop: Press this button once to place the disc in the Resume mode, which means that playback will stop, but as long as the tray is not opened or the disc changed, playback will continue from the same point on the disc when the Play Button 2M is pressed again. Resume will also work if the unit was turned off. Resume will not operate for WMA files or VCDs that do not have playback control. To stop a disc and have play start from the beginning, press the button twice.

6 Skip/Search Reverse: Press this button once to return to the start of the current chapter for a DVD or track for a CD. Subsequent individual presses will skip backwards through the available chapters or tracks. Press and hold the button to play the disc in the fast reverse mode at the speed indicated in the on-screen display and by the Playback Mode Indicators O. 7 Skip/Search Forward: Press this button once to move to the start of the next chapter for a DVD or track for a CD. Subsequent presses will skip forward through the available chapters or tracks. Press and hold the button to play the disc in the Fast Play mode at the speed indicated in the on-screen display and by the Playback Mode Indicators O. 8 Remote Sensor: The sensor that receives commands from the remote control is behind the front panel in this area. To ensure proper operation of the player with the remote, it is important that this area not be covered. In the event that the player is enclosed in a cabinet or if the remote sensor is covered, you may extend the remote sensor by connecting an optional, external remote sensor to the Remote Control Input on the rear panel (see page 14). When optional, external IR blasters are used for system control, they should be positioned so that they point at this area.

FRONT-PANEL CONTROLS

FRONT-PANEL INFORMATION DISPLAY

B C DE F GH I J K

NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com. A Disc-Type Indicators B Audio Bitstream Indicators C Parental Lock Indicator D Program Indicator E Angle Indicator A Disc Type Indicators: The DVD, DVD-Audio, SACD, CD, VCD, MP3, WMA or JPEG indicator will light to show the type of disc currently being played. NOTE: The DVD 47 does not have an HDCD (High Definition Compact Digital) decoder. Therefore, to benefit from HDCD encoding, make sure to connect one of the DVD 47s Digital Audio Outputs 34 to your receiver or processor with HDCD encoding. If your receiver or processor does not have HDCD decoding, you may still enjoy conventional CD playback of the disc. B Audio Bitstream Indicators: When a Dolby Digital, DTS or linear PCM digital audio signal is present on the disc, one of these indicators will light. DVD-Audio, MP3 and WMA bitstreams will be indicated by the Disc Type Indicator A. C Parental Lock Indicator: This indicator lights in red when the parental-lock system is engaged in order to prevent anyone from changing the rating level without a code. D Program Indicator: This indicator lights when a playlist has been programmed using the menu system (available for CDs only). See page 36 for more information on programming playlists. E Angle Indicator: This indicator blinks when alternative viewing angles are available on the DVD currently playing. F Random Indicator G A-B Repeat Indicator H VCD Playback Control Indicator I Repeat Indicators J V-OFF Indicator F Random Indicator: This indicator lights when the unit is in the Random Play mode. G A-B Repeat Indicator: This indicator lights when a specific passage for repeat playback has been selected. H VCD Playback Control Indicator: This indicator lights when the playback control function is turned on for VCDs. I Repeat Indicators: These indicators light when any of the Repeat functions are in use. J V-OFF Indicator: This indicator lights in red when the unit's video output has been turned off by pressing the V-OFF Button F on the remote control. K Video Output Indicators: When the DVD 47 is connected to a video display using the HDMI Output 2, the display sends information to the DVD 47 indicating the highest video resolution it is capable of handling, and the DVD 47 automatically sets the video output to match it. That resolution is displayed here. You may use the HD Mode Selector G to manually select a lower video output resolution. L Time Indicators: These positions in the display will show the running time of a disc in play. NOTE: The indicators LMN will also display text messages about the DVDs status, including LOADING when a disc is loading, POWER OFF when the unit is turned off, and DISC ERROR when a disc not compatible with the DVD is put into the play position. K Video Indicators L Time Indicators M Chapter/Track Number Indicators N Group/Title Indicators O Playback-Mode Indicator M Chapter/Track Number Indicators: When a DVD disc is playing, these two positions in the display will show the current chapter. When a DVD-Audio, SACD or CD disc is playing they will show the current track number. N Group/Title Indicators: These two positions in the display will show the current title number when a DVD disc is playing, or the current group for a DVD-Audio disc. O Playback-Mode Indicators: These indicators light to show the current playback mode:
Lights when a disc is playing in the normal mode. This indicator will flash when the disc is in Forward Slow Play mode. The on-screen banner display indicates the selected speed (1/2, 1/4, 1/8 or 1/16). When the DVD 47 is in the Fast Search play

mode, two of these indicators will light to show that the unit is in a Fast Play mode. The on-screen banner display indicates the selected speed (x2, x4, x8, x20 or x100). Fast Play mode is not available for WMA files. Lights when the disc is paused. Lights when the disc is in the Fast Search Reverse mode. The on-screen banner display indicates the selected speed (x2, x4, x8, x20 or x100). Fast Search Reverse mode is not available for WMA files. Flashes when the disc is in Reverse Slow Play mode. The on-screen banner display indicates the selected speed (1/2 or 1/4).

10

FRONT-PANEL INFORMATION DISPLAY

REMOTE CONTROL FUNCTIONS

0 Power On 1 Open/Close 2 Audio Select 3 Clear 4 Playlist 5 Repeat 6 A-B Repeat 7 Random 8 Info 9 Setup A Previous Step/Skip B Search/Slow Reverse C Angle D // / Navigation Buttons E Light F Video Off G HD Mode Selector H Dimmer I Progressive Scan/Interlaced J Enter K Pause L Zoom M Play N Search/Slow Forward O Stop P Next Step/Skip Q Disc Menu R Status S Numeric Keys T Title U Subtitle V Power Off W IR Emitter

0 1 3 5 6 7 9 8 A B C K D O M Q 2 4 S U

R P N L

J E
HD MODE

I G

47

NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com.

REMOTE CONTROL FUNCTIONS

11

REMOTE CONTROL FUNCTIONS

0 Power On: Turns on the player when it is in Standby mode (Harman Kardon logo appears onscreen). 1 Open/Close: Press to open or close the disc tray. 2 Audio Select: Press to access various audio languages on a DVD (if the DVD contains multiple audio streams). This button may also allow you to access other audio formats on DVD discs, such as linear PCM or Dolby Digital 5.1 tracks (or other formats), if theyve been recorded on the disc. 3 Clear: Press this button to remove on-screen menus or banners from the display screen. Press this button to clear the current play order displayed next to a track while programming a playlist. In Stop mode and with all menus and banners removed from the display, press and hold this button for five seconds to reset all settings to their factory defaults. 4 Playlist: Press this button to access the Playlist on-screen menu, which enables you to change the order in which tracks are played on a CD or DVDAudio disc. (See page 36 for more information on creating and playing playlists.) 5 Repeat: Each press of this button changes the playback mode to repeat a chapter or track or the entire disc. A repeat icon will appear in the upper right corner of the screen indicating the current repeat mode. If the Player Information Screen is active, the changes will be displayed on screen. 6 A-B Repeat: Press this button to enter the starting point of a section on a disc you wish to repeat. The second press enters the end of the selection to be repeated. Once the A (start) and B (end) points have been entered the player will repeat the selection until the Play Button M3 is pressed or the disc is stopped. If the Player Information Screen is active, the changes will be displayed on screen. 7 Random: Each press of this button starts or stops playback in random order. The Random function is only available when playing CDs, but not when a Playlist is active (the Player Information screen indicates Programmed Order on the Playlist line). 8 Info: Press once to access the Player Information menu for information on the current disc and the playback mode settings. Press again to remove information from screen. See page 28 for more information on the Player Information menu. 9 Setup: Press this button to use the DVD 47s on-screen menu system to adjust the players configuration settings. Note that the Info Button 8 must be pressed to access the DVD 47s Player Information menu to obtain detailed disc information, and to configure the playback mode of the disc. A Previous Step/Skip: Press this button once to skip back to the beginning of the current chapter on a DVD or track on a CD or DVD-Audio disc. Press it again to continue to skip back through the previous chapters or tracks. After first pressing the Pause Button K, press this button to step backwards through a DVD or VCD as a series of still image frames. B Search/Slow Reverse: This button initiates fast or slow play in the reverse mode. For fast reverse play, each press of the button when playing DVD or VCD discs changes the speed as indicated by the number appearing in the upper right corner of the screen. For slow reverse play, first press the Pause Button K and each subsequent press of this button will change the slow play speed as indicated by the number appearing in the upper right corner of the screen. C Angle: Press this button to change the camera angle on discs programmed for multiple-angle views. When a JPEG is being displayed, pressing the Angle Button C repeatedly causes the on-screen image to rotate clockwise by 90 degrees each press. The current orientation in degrees will be displayed in the upper right corner of the screen. D M NK LNavigation Buttons: Use to move the cursor in the on-screen menu system. E Light: Press to illuminate the buttons on the remote controller. F Video Off: Press this button to turn off the video output for improved audio performance when playing discs. Press it again to view the on-screen menus. It is highly recommended that you use this function to prevent burn-in of your plasma video display. G HD Mode Selector: When the DVD 47 is connected to a video display using the HDMI Output 2, the display sends information to the DVD 47 indicating the highest video resolution it is capable of handling, and the DVD 47 automatically sets the video output to match it. Pressing this button allows you to manually change the output resolution, with your selection indicated by the Video Output Indicators K. The DVD 47 will not allow you to select a resolution beyond the capabilities of your display, and if you try to do so, an on-screen error message will appear to alert you to the selection of an incompatible video format. Changes made with this button remain active until the DVD 47 or the display is turned off. When either is turned off, and then on again, the DVD 47 will revert to the default setting transmitted by the display. H Dimmer: Press to change the brightness of the front panel display or to turn the display off completely in the following order: FULL BRIGHTNESS HALF BRIGHTNESS OFF FULL BRIGHTNESS I Progressive Scan/Interlaced Button: Each press of this button selects between the progressive scan and interlaced modes for the Component Video Outputs . This button will not have any effect while the Setup menu system is active, indicated by SETUP- appearing in the Information Display B. Press the Setup Button 9 to clear the Setup menu, and then press this button to toggle between the progressive scan and interlaced component video settings. J Enter: Press this button to enter a setting in the DVD 47 menu system or to confirm a menu selection choice in a discs on-screen menu. K Pause: Press this button to pause the disc and freeze the picture during DVD or VCD playback, or to pause the playback of a CD or DVD-Audio disc. To play a DVD or VCD in the slow-forward or -reverse mode, first press this button and then press either the Search/Slow Forward N or Reverse Button B. L Zoom: Press this button to zoom in on the image from a DVD, VCD or JPEG image. The image may be expanded by a factor of x2, x3, x4 or x5. Once the on-screen indication of the zoom ratio disappears from the screen you may use the Navigation Buttons D to explore the picture. M Play: Press this button to begin the playback of a disc, or to resume normal playback when a disc has been paused or scanned. N Search/Slow Forward: This button initiates fast or slow play in the forward mode. For fast forward play, each press of the button when playing DVD or VCD discs changes the speed as indicated by the number appearing in the upper right corner of the screen. For slow forward play, first press the Pause Button K and each subsequent press of this button will change the slow play speed as indicated by the number appearing in the upper right corner of the screen. O Stop: When a DVD is playing, press this button once to place the disc in the Resume mode, which means that playback will stop. However, as long as the disc drawer is not opened, playback will continue from the point where the disc was stopped when the Play Button M3 is pressed again, as indicated by the LAST SCENE message (for DVDs) or the RESUME message (for CDs, MP3 files, JPEG files and VCDs with PBC) in the Information Display B. Resume will not operate for WMA files or VCDs that do not have playback control. Pressing the button twice will stop the disc and play will start from the beginning of the disc when the Play Button M3 is pressed again. P Next Step/Skip: Press this button once to advance to the beginning of the next chapter on a DVD or track on a CD. Press it again to continue to advance through the remaining chapters or tracks. After first pressing the Pause Button K, press this button to step through a DVD-Video disc as a series of still-image frames. Q Disc Menu: While a DVD is playing, press this button to view the discs main menu. R Status: Press while a disc is playing to view the on-screen status banner display. The first press will display the current title and chapter, the play mode icon and the elapsed time, along with a temperature

12

REMOTE CONTROL FUNCTIONS

10

REMOTE CONTROL FUNCTIONS

bar display of the time elapsed. You may use the M NK LNavigation Buttons D and the Enter Button J to select and change the current title or chapter, or the time display. The Status Banner is only available for DVDs and VCDs when PBC is turned off. Press the button one more time to remove the status displays from the screen. More detailed information about the disc is available by pressing the Info Button 8. S Numeric Keys: Press these buttons to enter a number. T Title: When a DVD is playing, press this button to go back to the main title menu for the disc being played. If you are playing a DVD-Audio disc that contains other formats the DVD 47 is capable of playing, such as linear PCM or Dolby Digital 5.1, pressing this button may enable you to switch playback from one audio format to another. U Subtitle: When a DVD is playing, press to select a subtitle language or to turn subtitles off. NOTE: Due to the variations in how DVD discs are authored, the subtitle languages displayed by the DVD 47 may not accurately reflect the actual languages available on the disc. It is recommended that subtitles be selected using the discs menu. V Power Off: Puts the player in Standby mode. W IR Emitter: This small, clear button-like device sends the IR commands from the remote control to the DVD 47. To ensure proper performance of the remote control, be sure to point it toward the unit and do not cover it with your fingers when sending remote commands.

11

REMOTE CONTROL FUNCTIONS

13

REAR-PANEL CONNECTIONS

AC INPUT 120V~, 60Hz 13W

0 2 1

4 3 5

6 7

8 9

NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com. Remote Control Output Remote Control Input HDMI Output Optical Digital Audio Output Remote Control Output: Connect this jack to the infrared (IR) input jack of another compatible remotecontrolled product to have the built-in Remote Sensor on the DVD 47 provide IR signals to other compatible products. Remote Control Input: Connect the output of a remote infrared sensor, or the remote control output of another compatible product, to this jack. This will enable the remote control to operate even when the front-panel Remote Sensor on the DVD 47 is blocked. This jack may also be used with compatible IR remote control-based automation systems. HDMI Output: If you have an HDMI-compatible receiver or video display device, connect this output to an HDMI input on the receiver or video display for the highest-quality uncompressed digital audio and video available. Even if your receiver is not capable of processing audio in the HDMI format, you may still experience the superb reproduction of HDMI video. If your video display has a DVI input, you may use an optional HDMI-to-DVI cable or adapter for the connection to the display. In all cases, the video display must be HDCP-compliant in order to use the HDMI output. For best results, we do not recommend HDMI connections in excess of ten feet. The following audio formats may be output via the HDMI connection: Audio CD 2-Channel PCM or 5.1-channel DTS DVD-Audio and SACD 2-Channel PCM DVD-Video Up to 5.1-channel Dolby Digital or DTS NOTE: To hear the high-resolution surround sound recorded on DVD-Audio and SACD discs, you need to connect the 6-Channel Audio Outputs 9 to the corresponding input jacks on your receiver or processor. These formats are not output digitally. Coaxial Digital Audio Output Component Video Outputs Composite Video Output S-Video Output Optical Digital Audio Output: Connect this jack to the optical digital input of an A/V receiver or surround processor for Dolby Digital, DTS or PCM audio playback. Coaxial Digital Audio Output: Connect this jack to the coaxial digital input of an A/V receiver or surround processor for Dolby Digital, DTS or PCM audio playback. NOTES: Connect either the Optical Digital Audio Output or the Coaxial Digital Audio Output to a corresponding digital audio input on your receiver or processor, but not both. The coaxial digital output should only be connected to a digital input. Even though it is the same RCAtype connector as standard analog audio connections, DO NOT connect it to a conventional analog input jack. Component Video Outputs: These outputs carry the component video signals for connection to display monitors with component video inputs. For standard analog TVs or projectors with inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these outputs to the corresponding inputs. If you have a high-definition television or projector that is compatible with high-scan-rate progressive video (480p or better), connect these jacks to the HD component inputs. If you are using a progressive scan display device, PROGRESSIVE must be selected in the Video menu in order to take advantage of the progressive scan circuitry. See the Scan Type section on page 23 for more information on progressive scan video. IMPORTANT: These jacks should NOT be connected to standard composite video inputs. Analog Audio Outputs 6-Channel Audio Outputs AC Power Cord

Composite Video Output: Connect this jack to the video input on a television or video projector, or to a video input on an A/V receiver or processor if you are using that type of device for video input switching. S-Video Output: Connect this jack to the S-video input on a television or video projector, or to an S-video input on an A/V receiver or processor if you are using that type of device for S-video input switching. Analog Audio Outputs: Connect these jacks to an audio input on an A/V receiver, surround processor or your television for analog audio playback. 6-Channel Audio Outputs: Connect these outputs to the matching 6-channel analog audio inputs on your receiver or surround sound processor. This connection is required to listen to the multichannel tracks on SACD and DVD-Audio discs. If the disc also contains a linear PCM, Dolby Digital or DTS track, you may listen to it using the HDMI 2, Optical or Coaxial Dgital Audio Output or the Analog Audio Outputs . AC Power Input: Plug the female end of the AC power cord included with the DVD 47 into this input, and then connect the other end of the cord to an AC outlet. If the outlet is controlled by a switch, make certain that it is in the ON position. Do not substitute another power cord for the one provided with the DVD 47. If the cord becomes damaged, contact your authorized Harman Kardon dealer for a replacement. NOTE: Youll find more details about all audio/video connections under Setup and Connections on the following pages.

14

REAR-PANEL CONNECTIONS

12

SETUP AND CONNECTIONS

Ensure that the power switch of this unit (and of other equipment to be connected) is set to Off before commencing connection. We also strongly recommend that you leave all system components unplugged from AC power until after you have completed the interconnections described in this section. Do not block the ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color-coding when connecting audio and video cables. VIDEO NOTES: For the best quality, if your receiver or processor and/or video display are HDMI-capable, we recommend using the HDMI output. With a single cable connection between components, HDMI is able to deliver uncompressed high-definition digital video and digital audio programming. Even without audio processing capability, your HDMI-ready receiver will be able to pass the uncompressed digital video signal to your video display. NOTE: If your video display has a DVI input, you may use an optional HDMI-to-DVI cable or adapter for the connection to the display. In all cases, the video display must be HDCP-compliant in order to use the HDMI output. If your equipment is not HDMI-ready, we recommend the use of component video for higher quality pictures. You may also use the standard S-video or composite video connection if your TV does not have component video inputs. The component and S-video outputs are not available simultaneously. The composite video output (yellow) sends the complete video signal to the TV (or to the A/V receiver) by one cable only. Use this video output when your TV set is equipped with a video input jack only. The S (separate) video output connector separates the color (C) and luminance (Y) signals before transmitting them to the TV set in order to achieve a sharper picture. Use the S-video cable when connecting the player to a TV equipped with an S-video input for improved picture clarity. The component video outputs further separate the color components of the video signal, optimizing the DVD 47s video performance. Component video connections are preferred, when available on your TV or receiver. If you are using a television or video display that is compatible with high-resolution 480P video signals, make sure to use the input jacks on the video display marked HD Component, if available. Also, make sure to configure the displays input settings for use with 480P video signals. You will also need to change the scan type in the DVD 47s Video Setup menu from Interlaced to Progressive. See page 23. Modern audio/video receivers are capable of connection to several video source devices, such as the DVD 47 and a VCR, cable television set-top box, HDTV tuner or other device. The receiver is equipped with video monitor outputs for connection to your television, projector or plasma display. As you select any input source device, the receiver selects the correct video input and routes it to the correct video monitor output to your television. It is recommended that you connect one of the video outputs from the DVD 47 to the corresponding input on your receiver to simplify operation of your home entertainment system. Refer to the owners guide for your receiver for more information. If your receiver is capable of multiroom operation, it is recommended that you connect both the component (or HDMI) and composite video outputs of the DVD 47 to the receiver. This enables the highestquality picture (component video) for viewing in the main listening room, while enabling the multiroom system, if it is video-capable, to distribute the composite video signal to the remote zone. Consult the owners guide for your receiver to determine whether it has video multiroom capability.

Connecting to a TV Only
When using the DVD 47 with a television but no audio receiver or processor, connect it as follows. Make the Analog Audio Connection and one of the Video Connections (Composite Video , S-Video , Component Video ). If your television or video display is HDMI-capable, you only need to make the HDMI connection, as it handles both audio and video. Remember to plug in the power cord.

TV
To HDMI or DVI port on TV To Y (green)/ Pb (blue)/ Pr (red) component video connectors To S-video input connectors on the TV To video input connectors (yellow) on the TV To analog audio input connectors (red/white) on the TV To power outlet (AC 120V/60Hz)

AC INPUT 120V~, 60Hz 13W

13

SETUP AND CONNECTIONS

15

SETUP AND CONNECTIONS

Connecting to a Receiver/Amplifier With a Dolby Digital or DTS Decoder
One of the major advantages of the DVD format is its ability to use a variety of digital audio formats for the ultimate in sonic performance. However, in order to enjoy the benefits of digital audio, you must use a receiver or processor that has digital audio decoding capabilities and make an optical or coaxial digital audio connection between the DVD 47 and your home theater system. This simple connection is made as shown below with an optional coax or optical cable. Only one of these connections is required, and both should not be made at the same time. In order to take advantage of the high-resolution SACD and DVD-Audio output of the DVD 47, you must connect the 6-Channel Audio Outputs 9 to the matching 6-channel inputs on your receiver or processor. Only compressed PCM, Dolby Digital or DTS tracks that may be present on the disc may be listened to using the digital audio outputs. Thus, the DVD 47 decodes the digital signal and outputs separate signals for each channel: front left, center, front right, surround right, surround left and lowfrequency effects (LFE). NOTES FOR ANALOG AUDIO: If you wish to use the DVD 47 as the input for a multiroom system, the Analog Audio Outputs should be connected to the standard analog left/ right DVD or CD inputs on your digital receiver or processor. The connection from the Analog Audio Outputs to the TV is optional. If you plan on occasionally using your DVD 47 alone, without turning on your complete system, this connection must be made. When the audio signal is to be fed to an analog receiver rather than to the TV, connect the Analog Audio Outputs to any analog audio inputs on your receiver or processor. The DVD 47 will downmix multichannel recordings to two channels. The analog audio connection should also be made if you wish to play high-resolution 96kHz PCM audio discs where your receiver does not support 96kHz processing. NOTES ON VIDEO: With multiple video sources, your audio/video receiver can be used for selecting the video signal and routing it to the TV. Connect the HDMI 2, Component , Composite or S-Video output of the DVD 47 to the correct video input on your receiver, and the video outputs of the receiver to your TV. For more details, see the manual for your audio/video receiver. If your receiver has only DVI inputs, you may use an optional HDMI-to-DVI cable or adapter for the connection to the receiver. In addition, the video display used with your system must be HDCP-compatible in order to take advantage of the HDMI output, whether it is used with HDMI or DVI connections. of the video connections (Composite Video , S-Video , Component Video or HDMI ) to the video input jacks on the A/V receiver, and then connect the receivers video monitor output to the TV. If you will sometimes use the TV without the audio component, you may optionally make the Analog Audio Connection to the TV. In addition, to benefit from the high-resolution surround sound formats recorded on SACD and DVD-Audio discs, which are not output via the HDMI connection, you will need to make the 6-Channel Audio Connection to your receiver or processor. Second, if your receiver or processor is not HDMIcapable, make either the Optical Digital Audio Connection or the Coaxial Digital Audio Connection , to the receiver or processor. Remember that when the HDMI connection is used with a receiver or processor that is compliant with the HDMI format, a single connection suffices for both audio and video, except for SACD and DVD-Audio discs, as noted. If your receiver or processor is not capable of processing the HDMI audio signal, then a separate audio connection is required. If your receiver/ processor has multiroom capability, you may also connect the DVD 47s analog audio outputs to the DVD analog audio inputs on the receiver. IMPORTANT NOTE: Make certain that any device being connected, including the DVD 47, your receiver or processor and your TV or video display, is turned off whenever you make connections between products.

Connecting to a Receiver
When using the DVD 47 with an audio/video receiver or processor, connect it as follows. First, make one

Front Speakers (Left/Right)

Center Speaker

Surround Speakers (Left/Right)

Subwoofer

Dolby Digital/DTS A/V Receiver or Processor

HDMI, DVI, Component, S-video and/or Composite video monitor outputs

TV

To HDMI or DVI port

To optical digital audio input connectors

To coaxial digital audio input connectors

To Y (green)/ Pb (blue)/ Pr (red) component video connectors

To S-video input connectors

To video input connectors (yellow)

To analog audio input connectors (red/white) on the TV or receiver (see above)

To 6-channel analog audio inputs on receiver

To power outlet (AC 120V/60Hz)

AC INPUT 120V~, 60Hz 13W

16

SETUP AND CONNECTIONS

14

TEST SCREEN
DVD is one of the highest quality sources ever made available for in-home playback of prerecorded pictures and sound. In order to make certain that your home theater system is fully optimized to take advantage of DVDs superb picture quality, the DVD 47 offers a built-in video test signal that makes it easy to calibrate your TV or video display for proper playback. and evenly changing from black to white, going from left to right. Contrast Adjustment: 1. Adjust the contrast on your TV until you see a bright white bar in the lower right corner of the screen and a deep-dark-black bar to the left. The optimal contrast setting will depend on your preference and the surrounding light in the TV room. 2. If the brightness of the white bar no longer increases when the contrast is turned up or the borders of the white harman/kardon letters on top bloom (overlight) into the black areas (drastically decreasing the sharpness of the type), the contrast has been turned up too much. Reduce the contrast until these effects disappear and the video still looks realistic. 3. If you are watching TV with customary surrounding daylight, adjust the contrast so that a normal video picture has about the same look as the surroundings in your room. That way the eye is relaxed when watching the TV picture. This contrast setting may be reduced when the surrounding light is dimmed, thereby usually improving the sharpness of a video significantly. 4. The gray scale in the middle line needs to have the same clear difference between each bar as before the contrast adjustment. If not, go back to Brightness Adjustment and repeat Step 3 and then Contrast Adjustment, making only minor adjustments each time for optimization. Color Adjustment 1. When the brightness and contrast are set optimally, turn up the color control to the level of your preference. Adjust to the level where the colors look strong but still natural, not overdone. If the color level is too high, depending on the TV, some of the bars will seem wider or the color intensity will not increase while the control is turned up. Then the color control must be reduced again. Ultimately, you also should test the color intensity with a video e.g., pictures of natural faces, flowers, fruit and vegetables, and other common natural articles for an optimal setting of the color intensity. 2. Use the large white bar below the gray scale to tweak the warmth of the picture. Every viewer has a preference as to how the glow of the picture should be. Some prefer a little colder picture, some a warmer glow. The Tint function on your TV and the white bar can be used to control this. Adjust the Tint to the level where you feel the white color has the tone you prefer. Sharpness Adjustment Contrary to intuition, the picture will appear sharper and clearer with the sharpness, or Edges, setting backed off from the maximum setting. Reduce the sharpness setting on your television, and the Edges setting on the DVD 47 video adjustments menu if necessary, to minimize the appearance of any white lines between the bars in the gray scale portion of the test screen. Convergence and Edge Focus The crosshatch pattern that surrounds the test screen may be used to evaluate edge focus and convergence in front- or rear-projection video displays. However, the controls used to adjust these parameters are often not user-accessible. In any event, these adjustments are extremely complex, and require proper training and experience to avoid worsening the situation. Therefore, it is recommended that if you are unable to improve the picture using the available controls, contact the video display manufacturers authorized service representative for assistance. When all desired setup and configuration entries have been made, use the Navigation Buttons n until Done is highlighted at the bottom of the Video Adjustments submenu. Press the Enter Button t to select it to return to the on-screen menu system. Then, press the Setup Button j to remove the menu displays from the screen. The unit will return to normal operation and you are ready to enjoy the finest in DVD or CD playback!

Test Screen
With the test screen showing on your video display, the following adjustments may be made: The proper color intensity setting on your TV. Proper color adjustments using the color bars, which should be (left to right) black, white, yellow, cyan (turquoise), green, magenta, red, blue, black. The proper color transition, seen as sharp separation of the bars. The performance of the color circuits in your TV (with Video signals); bar edges should show no vertical crawling dots. With the gray scale and the black/white fields below the color bars, the brightness and contrast of your screen can be adjusted. NOTE: Most of the video adjustments using the DVD 47s test screen should be made using the controls on your video display, with the DVD 47s controls set at their factory default position in the center. If necessary, you may tweak the brightness and sharpness using the controls found in the DVD 47s video adjustments menu.

Color Bars

Gray Scale 100% Black/White Fields

Figure 10

TV Picture Adjustment With Test Screen Brightness Adjustment: 1. Turn down the color control on your TV until the color bars are visible in black and white. 2. Adjust the contrast on your TV to the lowest level where you still can see all bars within the gray scale in the test picture separately and clearly. 3. Adjust the brightness using the DVD 47 video adjustments control so that the bars in the gray scale are all visible. The bar furthest to the left has to be as black as possible rather than gray, but the next gradation must clearly be distinct from it. All the bars in the gray scale should be gradually

15

TEST SCREEN

25

PLAYBACK BASICS
Loading Discs
To load discs in the DVD 47, first turn the DVD 47 on by pressing in the Power On/Off Switch 1 or Power On Button 0. Note that the Power Indicator 0 will turn amber when the unit is connected to an AC power source. It will turn blue when 25 37 the Power On Button 2 0 is pressed.
27 29 22 34 36

When loading CDs, SACDs or DVD-Audio discs, load the discs with the label side up. When loading DVD-Video discs with printed labels, load them label side up. Some DVD-Video discs are double-sided. The title information for these will be printed on the inner ring of the disc, very close to the center hole. The title for the side you wish to play should be facing up. After a disc is properly loaded, press the Open/Close Button 1A to close the disc drawer. After the drawer closes, you will see a brief indication of LOADING in both the Main Information Display B and in the on-screen display to alert you to the fact that the unit is determining the type of disc (DVD-Video, DVD-Audio, SACD, CD, VCD, JPEG, WMA or MP3) and is reading the data for track, chapter, title and other information about the disc. Once the discs data has been read, the type of disc will be displayed by the Disc-Type Indicator A and its type will be identified in the upper right corner of the screen. If the disc is a DVD, SACD, CD or VCD2.0 disc, it will automatically begin playing. The discs track timing information and other relevant data will appear in the Main Information Display B. Any time a control button is pressed, an icon will appear in the upper right corner of the screen to indicate the players action. These icons include the standard transport modes (play, stop, pause, forward and reverse fast and slow search, track skip), the open/close disc drawer symbol, the repeat and random modes, and the prohibit icon () if the command action is not available at that time or for that disc. As explained in more detail in other sections of this manual, pressing the Status Button R displays the Status Banner for DVDs, and pressing the Info Button i displays the Player Information menu. When a DVD is detected, playback will automatically begin and the screen will show the program or the discs menu, depending on how the disc was created. If a CD is detected, playback will begin automatically. If the disc contains MP3, WMA or JPEG files, or if it is a VCD without playback control, the Player Information display will appear (see Figure 11). To play one of these files, you may need to use the Navigation Buttons n to select a folder and press the Enter Button t to open it. Use the Navigation Buttons n to select a file for playback, and press the Enter Button t to begin play. VCD2.0 discs will begin play automatically, similar to a conventional audio CD.
Figure 11

Next, press the Open/Close 24 Button 1A until the 28 23 35 disc tray opens. Hold the disc by the edge, and gently place it into the 30 21 33 disc drawer, making certain that the disc is properly 31 20 32 seated in the trays insert. If the disc is not correctly centered, you may damage both the disc and the player when the drawer closes. When loading discs, please note the following:

UDIO/VIDEO

The DVD 47 will play discs with the following logos as well as most DVD-RW or DVD+RW discs and most WMA and JPEG discs, including Kodak Picture CDs, but not Kodak Photo CDs. DO NOT attempt to AUDIO/VIDEO play another type of disc.

If a disc is already in the drawer when the unit is turned on, it will begin playing. If the disc was stopped using the Resume function, playback will begin from the point where it was stopped. If the disc was stopped by pressing the Stop Button 4O twice, the disc will begin playing from its beginning. Playback Features for DVD and CD Discs: To momentarily pause playback and freeze the current picture frame on a DVD, press the Pause Button 3K. To resume playback after pressing the Pause button, press the Play Button 2M. To move forward or backward through the tracks on a DVD-Audio disc or CD, or the chapters on a DVD, press the Skip Forward/Reverse Buttons 56 on the front panel or the Previous/Next Buttons AP on the remote. To move forward or backward through the DVD or CD disc being played at fast speed, press the Search Forward/Reverse Buttons BN, or press and hold the front-panel Skip/Search Buttons 56 briefly until fast play begins, and then release them. Once one of these buttons is pressed, the fast search will continue until the Play Button 2M is pressed. Each press of the Search Forward/Reverse Buttons 56B N will cycle to the next speed in the following order: 2x, 4x, 8x, 20x, 100x. NOTE: Fast search is available when DVD-Audio, SACD and MP3 discs are playing, but not for WMA files. When a DVD is playing, you may move forward or backward through the disc in slow motion by first pressing the Pause Button 4u and then pressing the Search/Slow Forward or Search/ Slow Reverse Buttons 67lx. Each press of the buttons will cycle the player through one of the four forward slow-play speeds: 1/2x, 1/4x, 1/8x or 1/16x or one of the two reverse slow-play speeds: 1/2x or 1/4x. Press the Play Button 2w to resume normal playback. Note that there is no audio playback during fast or slow-forward or -reverse play. This is normal for DVD, as A/V receivers and surround processors cannot

The DVD 47 will only display video in the NTSC format. Although the PAL format is generally used in Europe and other regions of the world outside North America, some music or other DVDs are available in PAL with a Region Code of 0, which means they may be played on any DVD player around the world. The DVD 47 will automatically detect the PAL format, and make the necessary conversions so that the video may be displayed on an NTSC TV. PAL discs bearing a Region Code other than 0 or 1 may not be played on the DVD 47. Playback capability for CD-RW, DVD-RW, DVD-R, DVD+RW or DVD+R discs will vary according to the quality of the disc. On some occasions it is possible that these discs may not play on the DVD 47. This does not indicate any problem with the DVD 47. The DVD 47 will only play discs that are coded for Region 1 or discs that are open to being played in all regions (Region Code 0). Discs that contain a Region Code of 2, 3, 4, 5 or 6 (as noted by a number inside a world map logo on the discs cover jacket or case) will not play. Both 5-inch (12cm) and 3-inch (8cm) discs may be used.

26

PLAYBACK BASICS

16

PLAYBACK BASICS
process the digital audio streams during slow modes. Slow-play is not available for CD discs. To advance frame by frame while a DVD is playing, first press the Pause Button 4u, then press the Skip/Step (Previous) 6k or Skip/Step (Next) 7z buttons repeatedly. Press the Pause 4u or Play Button 3w to resume normal play. Frame-by-frame movement in reverse is not available. When a camera icon shows on the screen, or the Angle Indicator E appears, this is your indication that there is multiple-angle information on the disc being played. To change the angle, press the Angle Button C repeatedly until the desired angle view appears. An on-screen banner message will appear to indicate the angle view in use. To illuminate the buttons on the remote control so that they may be seen in low-light conditions, press the Light Button E.

17

PLAYBACK BASICS

27

TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
SYMPTOM Unit does not turn on POSSIBLE CAUSE No AC power SOLUTION Check AC power plug and make certain any switched outlet is turned on. Load disc label-side up; align the disc with the guides and place it in its proper position. Check to see that disc is SACD, CD, CD-R, CD-RW, VCD, MP3, WMA, JPEG, DVD-R, DVD-RW, DVD+R, DVD+RW (standard-conforming), DVD-Audio or DVD-Video; other types will not play. Use Region 1 or Open Region (0) disc only. Enter password to override or change rating settings (see page 20). Check all video connections. Check input selection of TV or receiver. Use Progressive Scan mode only with compatible TV. Press Progressive Scan/ Interlaced Button I to toggle to the correct mode (see page 23). Press Video Off Button F to reactivate video circuitry. The HDMI Output 2 may not be used with video displays that are not HDCP-compliant. Unplug the cable and select another audio and video connection (see pages 14 through 16). Check all audio connections. Check digital audio settings on DVD 47 and on receiver. There is no audio playback on DVD discs during fast or slow modes. Use analog audio outputs. Use 6-Channel Audio Outputs 9 or Analog Audio Outputs 8.

Disc does not play

Disc loaded improperly Incorrect disc type

Invalid Region Code Rating is above parental preset No picture Intermittent connections Wrong input Progressive Scan output selected Video Off feature active HDMI Output 2 is connected to a video display that is not HDCP-compliant.

No sound

Intermittent connections Incorrect digital audio selection DVD disc is in fast or slow mode Surround receiver not compatible with 96kHz PCM audio DVD Audio or SACD disc is loaded without using analog audio connection MPEG-2 decoding

Picture is distorted or jumps during fast forward or reverse play Some remote buttons do not operate during DVD play; prohibited symbol appears (see below) The OSD menu is in a foreign language The symbol appears

It is a normal artifact of DVD playback for pictures to jump or show some distortion during rapid play. With most discs, some functions are not permitted at certain times (e.g., Track Skip) or at all (e.g., direct audio track selection).

Function not permitted at this time

Incorrect OSD language Requested function not available at this time Incorrect match of aspect ratio settings to disc Weak batteries Sensor is blocked Copy protection

Change the display language selection (see page 23). Certain functions may be disabled by the DVD itself during passages of a disc. Change aspect ratio settings (see page 23).

Picture is displayed in the wrong aspect ratio Remote control inoperative

Change both batteries. Clear path to sensor or use optional outboard remote sensor. Many DVDs are encoded with copy protection to prevent copying to VCR. Stop play of disc. Press and hold Clear Button 3 until the display blinks. This resets the password and all settings to their defaults.

Disc will not copy to VCR

Password not accepted.

Incorrect password being used or password has been forgotten.

18

TROUBLESHOOTING GUIDE

37

CJDDVD27YA

COP11840C

19

DISASSEMBLY PROCEDURES (DVD27)

<1> TOP-COVER (21) REMOVAL 1. Remove 4 screws and then remove the Top-cover. <2> FRONT PANEL ASSY REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Disconnect the lead wire (BN72-32p) on the Fip PCB (37-1) from connector (CN72) on the Input PCB (39-1) 3. Disconnect the lead wire (BN80-11P) on the Fip PCB (37-1) from connector (CN80) on the Main PCB (38-1). 4.Disconnect the lead wire (BN16-6P) on the Tone PCB (37-3) from connector (CN16) on the Connect PCB (37-7). 5. Disconnect the lead wire (BN41-6P) on the Tone PCB (37-3) from connector (CN41) on the Video PCB (40-1). 6. Disconnect the lead wire (BN18-5P) on the Digital input PCB (37-8) from connector (CN18) on the Input PCB (39-1). 7. Disconnect the lead wire (BN81-8P) on the Fip PCB (37-1) from connector (CN81) on the Trans PCB (40-5). 8. Disconnect the lead wire (BN15-8P) on the Fip PCB (37-1) from connector (CN15) on the Download PCB (37-9). 9. Remove 1 screw(S10) and then lead wire (JW82-2P) on the Phone PCB (37-4). 10.Remove 1screw(S10) and then lead wire (JW84-1P) on the Tone PCB (37-3) 10. Remove 10 screws (S1) and then remove the Front Panel ASSY. <3> TONE PCB (37-3) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Remove the Front Panel ASSY, referring to the previous step<2>. 3. Pull out the Volume Knob ASSY & 3 Rotary Knobs (5). 4. Remove 10 screws (S2,S14), and then remove the Tone PCB (37-3). 5. Disconnect the lead wire (BN84-5P) One the Tone PCB (37-3) from connector (CN84) on the Fip PCB (37-1) <4>PHONE PCB (37-4) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Remove the Front Panel ASSY, referring to the previous step<2>. 3. Disconnect the lead wire (BN85-2P) on the Fip PCB (37-1) from connector (CN85) on the Phone PCB (37-4) 4. Remove 2 screws (S2,S3) and then remove the Phone PCB (37-4) . <5>POWER LED PCB (37-6) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Remove the Front Panel ASSY, referring to the previous step<2>. 3. Remove 2 screws (S2) and then remove the Power led PCB (37-6). 4. Disconnect the lead wire (CN88) from connector (BN88-4P) on the Fip PCB (37-1). <6>FIP PCB (37-1) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Remove the Front Panel ASSY, referring to the previous step<2>. 3. Remove the Tone PCB (37-3), referring to the previous step<3>. 4. Remove the Phone PCB (37-4), referring to the previous step<4>. 5. Remove the Power led PCB (37-6), referring to the previous step<5>. 6. Remove 6 screws (S2) and then remove the Fip PCB (37-1) <7>TUNER MODULE (42) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Disconnect the connector (CON1-Card cable) from connector (CN13) on the Input PCB ASSY(39-1). 3. Remove 2 screws (S8) and then remove the Tuner Module (42).

20

<8>VIDEO PCB (40-1) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Disconnect the lead wire (BN41-6P) on the Tone PCB (37-3) from connector (CN41) on the Video PCB (40-1 3.Disconnect the connector (CN15-Card cable) on the Input PCB (39-1) from connector (CN43) on the Video PCB (401). 4. Remove 6 screws (S8) and then remove the Video PCB (40-1). <9>I-POD PCB (41) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Disconnect the lead wire (BN42-5P) on the INPUT PCB (39-1) from connector (CN42) on the I-POD PCB (41). 3. Disconnect the lead wire (BN45-4P) on the INPUT PCB (39-1) from connector (CN45) on the I-POD PCB (41). 4. Disconnect the lead wire (BN44-4P) on the Download PCB (37-9) from connector (CN42) on the I-POD PCB (41). 5. Remove 2 screws (S13) and then remove the I-POD PCB (41). <10>INPUT PCB (39-1) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Remove the Connect PCB (37-7). 3. Disconnect the lead wire (BN18-5P) on the Digital input PCB (37-8) from connector (CN18) on the Input PCB (39-1). 4. Disconnect the connect (BN72-Card canle)) on the Fip PCB (37-1) from connector (CN72) on the Input PCB (39-1) 5. Remove 11 screws (S8,S11) and then remove the Input PCB (39-1). <11>Download PCB (37-9) REMOVAL 1.Remove the Top-cover, referring to the previous step<1>. 2.Disconnect the connector (CN15) from lead wire (BN15-8P) on the Fip PCB (37-2) 3.Remove 2 screws (S4) and then remove the Download PCB (37-9). <12>POWER TRANS (36) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Disconnect the connector (BN20,BN96) on the Trans PCB (40-4) from lead wire (CN20-3P,CN96-6P) on the Main PCB (38-1). 3. Remove 4 Trans screws (S9) and then remove the Power Trans (36). <13>MAIN PCB ASSY (38-1) REMOVAL 1. Remove the Top-cover, referring to the previous step<1>. 2. Remove the Tuner module, referring to the previous step<7>. 3. Remove the Video PCB, referring to the previous step<8>. 4. Remove the Input PCB, referring to the previous step<9>. 5. Disconnect the connector (CN80) from lead wire (BN80-11P) on the Fip PCB (37-1). 6. Disconnect the connector (CN91) from lead wire (BN91-3P) on the Moms PCB (37-5). 7. Disconnect the connector (CN20,BN96) from lead wire (CN20-3P,BN96-8P) on the Trans PCB (40-4,40-5) 8. Remove 11screws (S1-1EA, S4-2EA, S6-2EA, S8-6EA) and then remove the Main PCB ASSY(38-1).

21

DVD Player Block Diagram (DVD47)

MUTE Control OPEN/CLOSE & SPINDLE MOTOR & SLED CONTROL AM5888S 27MHz OSC
EEPROM 24C08

S C A R VIDEO
3CH VIDEO DRV. BA7660FS

FILTER

EUR ONLY

T Y Pb Pr

6CH. VIDEO DRV. BH7862FS

VIDEO FILTER Comp.

RF SERVO ZR36707

S-Video

MPEG
ZR36778 HDMI TRANSM. HDMI OUT

TRAVERSE UNIT
(SANYO PICK-UP HD62) DV-342FV 16M Bit FLASH u-COM SDRAM 64M M29W160ET70N SPDIF OUT

Coax. Optical AUDIO PCM OUT BUFFER

Remote Sensor SYSTEM u-COM ST72F324K2 8MHz OSC

DSD DECODER SAA7893

DSD OUT

LT/RT

SDRAM 64M M29W160ET70N

BUFFER 74HCT700 7

DATA SELECT MUX.

74LVC157

FL/FR
AUDIO DAC CS4392

RL/RR SW/C

Key Pad

SMPS Ass'y COP11840C

PHOTO COUPLER

VFD (CIG Type) 13BT229GINK

IN Out SYSTEM

KP1010B

22

DVD47 Electrical Parts List

Ref. Designator SMPS PCB ASS'Y Capacitors C905 C906 C907 C908 C910 C921 C922 C923 C924 C925 C926 C927 C928 C929 C931 C935 C901 C902 C903 C904 C920 C930 C932 C933 Semiconductors D906 D907 D909 D910 D911 D912 D925 D926 D928 Q905 Q906 Q907 Q908 Q910 Q911 Q912 Q904 D901 D902 D903 D904 D905 D908 D913 D920 D921 D922 D923 D924 HVDMTZJ12BT HVD1N4148T HVDMTZJ24BT HVD1N4148T HVD1N4148T HVDMTZJ5.1BT HVD1N4148T HVDMTZJ12BT HVDMTZJ2.7BT HVTKTA1273YT HVTKSC1008YT HVTKRC102MT HVTKRA102MT HVTKSC1008YT HVTKSA708YT HVDMCR100-6ZL1G HVTKTC3198YT HVD1N4007T HVD1N4007T HVD1N4007T HVD1N4007T HVDUF4007T HVD1N4007T HVD1N4148T HVD31DQ06H HVDUF4007T HVD1N4937T HVD1N4937T HVDSF26T DIODE , ZENER DIODE DIODE , ZENER DIODE DIODE DIODE , ZENER DIODE DIODE , ZENER DIODE , ZENER TR NORMAL KTA1273/PNP/TO-92L TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR SCR (ON SEMI) TRANSISTOR DIODE DIODE DIODE DIODE DIODE , SCHOTTKY DIODE DIODE DIODE DIODE , SCHOTTKY DIODE , RECTIFIERS DIODE , RECTIFIERS DIODE , SUPER FAST MTZJ12B 1/2W 1N4148 MTZJ24BT 1/2W 1N4148 1N4148 MTZJ5.1B 1/2W 1N4148 MTZJ12B 1/2W MTZJ2.7B 1/2W KSC1008Y KRC102M KRA102M KSC1008Y KSA708Y KTC3198Y 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA CCFT1H104ZF CCKT1H331KB CCEA1HH100T CCEA1HH470T CCEA1HH1R0T CCEA1EH331T CCEA1HH0R1T CCEA1EH331T CCEA1VH101T CCEA1EH331T HCQI1H102JZT CCEA1HH470T CCEA1HH470T CCFT1H104ZF CCFT1H104ZF CCFT1H104ZF HCQF2E104KZE HCQF2E104KZE CCET400VKRH470K CCKT3A222KBL CCEA1EH102T CCKDHS222ME CCKDHS102ME CCKDHS102ME CAP , SEMICONDUCTOR CAP , CERAMIC CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , MYLAR CAP , ELECT CAP , ELECT CAP , SEMICONDUCTOR CAP , SEMICONDUCTOR CAP , SEMICONDUCTOR CAP , POLYPROPYLENE FILM CAP , POLYPROPYLENE FILM CAP , ELECT(400V/47uF) CAP , CERAMIC CAP , ELECT CAP , CERAMIC (400V Y-CAP) CAP , CERAMIC (400V Y-CAP) CAP , CERAMIC (400V Y-CAP) 0.1UF 50V ZF 330PF 50V KB 10UF 50V 47UF 50V 1UF 50V 33OUF 25V 0.1UF 50V 33OUF 25V 100UF 35V 33OUF 25V 1000PF 50V J 47UF 50V 47UF 50V 0.1UF 50V ZF 0.1UF 50V ZF 0.1UF 50V ZF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA Part Number Description Qty

KOSHIN KRH SERI EKR3A222K05FK5 1000UF 25V SDE2G222M10FF7 SDE2G102M10FF7 SDE2G102M10FF7

UF4007 1N4148 31DQ06-FC5 UF4007 1N4937(600V/1A) 1N4937(600V/1A)

23

Ref. Designator SMPS PCB ASS'Y PC91 Q901 Q903 IC91 IC92 Resistors R901 R903 R904 R905 R906 R907 R909 R910 R911 R912 R913 R914 R920 R921 R922 R923 R924 R925 R926 R928 R929 R930 R934 R935 R940 R902 R908 R927 Miscellaneous FH91 FH92 L903 L905 NT91 CN91 CN92 LF91

Part Number

Description

Qty

HVIPC17L1CB BVICEF04N6 HVTKSB1151Y BVISG6848DZ HVIKIA431BAT

I.C , PHOTO COUPLER FET , CEF04N6 TRANSISTOR IC,PWM I.C , REGULATOR

KSB1151Y SG6848DZ KIA431B

1 1 1 1 1

EA EA EA EA EA

KROS1TJ105V CRD25TJ754T CRD25TJ754T CRD20TJ222T CRD20TJ101T CRD20TJ103T CRD20TJ100T CRD20TJ103T CRD20TJ104T CRD20TJ102T CRD20TJ102T CRD20TJ333T CRD20TJ101T CRD20TJ222T CRD20TF3481T CRD20TF3001T CRD20TJ101T CRD25TJ101T CRD20TJ101T CRD20TJ102T CRD20TJ102T CRD20TJ101T CRD20TJ102T CRD20TJ153T CRD20TJ472T KRG1SANJ104H KRW1PJ1R5V KRDS1TJ681V

RES , METAL FILM (1/2W , 1M OHM) RES RES RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES , CARBON RES,METAL OXIDE FILM RES, WIRE WOUND RES , CARBON

2.2K OHM 1/5W J 100 OHM 1/5W J 10K OHM 1/5W J 10 OHM 1/5W J 10K OHM 1/5W J 100K OHM 1/5W J 1K OHM 1/5W J 1K OHM 1/5W J 33K OHM 1/5W J 100 OHM 1/5W J 2.2K OHM 1/5W J 3K 1/5W F 100 OHM 1/5W J 100 OHM 1/5W J 1K OHM 1/5W J 1K OHM 1/5W J 100 OHM 1/5W J 1K OHM 1/5W J 15K OHM 1/5W J 4.7K OHM 1/5W J 1W 1.5(J) NON-I 680OHM 1/2W J

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

T901

KJCFC5S KJCFC5S CLZ9Z040Z CLZ9Z040Z KRT10D9MSFT KJP02KA060ZY CJP12GA19ZY CLZ9Z060Y CMY2A223 CTB3+8J CLT9Z018ZE

HOLDER , FUSE HOLDER , FUSE COIL , CHOKE(6.8UH) COIL , CHOKE(6.8UH) THERMISTER WAFER WAFER LINE FILTER HEAT SINK SCREW TRANS (DVD 27)

DR 6.5*7.5 DR 6.5*7.5 7.92MM(YUNHO) CLZ9Z060Y

EER2828H

1 1 1 1 1 1 1 1 1 1 1

EA EA EA EA EA EA EA EA EA EA EA

MAIN/FRONT PCB ASS'YS Capacitors C100 C101 C102 C103 C104 HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 1 1 1 1 1 EA EA EA EA EA

24

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS C106 C107 C110 C112 C113 C115 C117 C120 C122 C124 C126 C127 C129 C131 C132 C133 C138 C140 C141 C143 C144 C146 C148 C149 C151 C152 C153 C154 C156 C157 C158 C159 C160 C161 C163 C164 C165 C166 C167 C168 C169 C170 C172 C173 C174 C175 C176 C178 C179 C180 C181 C183 C185 C186 C187 C188 C189 C190 C191 C192 C193 HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H103KC HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H180JA HCUS1H330JA HCUS1H330JA HCUS1H562KC HCUS1H562KC HCUS1H562KC HCUS1H471JA HCUS1E104ZF HCUS1E104ZF HCUS1H102KC HCUS1H102KC HCUS1H102KC HCUS1H102KC HCUS1H102KC HCUS1H102KC HCUS1H102KC HCUS1E333KC HCUS1E104ZF HCUS1H102KC HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.01UF KC 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 18PF JA 1608 33PF JA 1608 33PF JA 1608 5600PF KC 1608 5600PF KC 1608 5600PF KC 1608 470PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 1000PF KC 1608 1000PF KC 1608 1000PF KC 1608 1000PF KC 1608 1000PF KC 1608 1000PF KC 1608 1000PF KC 1608 0.1UF ZF 1608 1000PF KC 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

25

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS C194 C195 C196 C197 C199 C200 C201 C204 C205 C207 C208 C209 C210 C214 C215 C217 C218 C220 C222 C225 C227 C228 C229 C230 C231 C232 C234 C235 C237 C240 C242 C244 C245 C247 C249 C250 C252 C253 C254 C255 C256 C257 C260 C261 C262 C263 C266 C267 C276 C277 C279 C280 C281 C282 C283 C284 C285 C286 C287 C295 C304 HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H272KC HCUS1H102KC HCUS1H273KC HCUS1H102KC HCUS1E104ZF HCUS1H561JA HCUS1H273KC HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H222KC HCUS1H222KC HCUS1H222KC HCUS1H222KC HCUS1H330JA HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H150JA HCUS1H150JA HCUS1E104ZF HCUS1E104ZF HCUS1H272KC HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCSHB21A220B CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , TANTAL B2 SIZE 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 2700PF KC 1608 1000PF KC 1608 0.027UF KC 1608 1000PF KC 1608 0.1UF ZF 1608 560PF JA 1608 0.027UF KC 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 2200PF KC 1608 2200PF KC 1608 2200PF KC 1608 2200PF KC 1608 33PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 15PF JA 1608 15PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 2700PF KC 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

26

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS C306 C307 C308 C310 C311 C312 C313 C336 C337 C338 C339 C346 C380 C401 C402 C403 C405 C406 C408 C429 C430 C431 C432 C511 C531 C533 C552 C553 C555 C556 C578 C580 C581 C584 C585 C593 C594 C615 C617 C620 C630 C631 C636 C638 C639 C641 C644 C646 C650 C657 C659 C660 C662 C664 C665 C668 C671 C672 C674 C677 C678 HCSHB21A220B HCSHB21A220B HCSHB21A220B HCUS1H102KC HCUS1H560JA HCUS1H102KC HCUS1H102KC HCUS1H682KB HCUS1H223KC HCUS1H221JA HCUS1E104ZF HCUS1H7R0DT HCUS1H150JA HCUS1E104ZF HCUS1E104ZF HCUS1H102KC HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF CRJ10DJ0R0T HCUS1H221JA HCUS1E104ZF HCUS1H151JA HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H150JA HCUS1H150JA HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H391JA HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1H104ZF HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1H391JA HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF HCUS1E104ZF CAP , TANTAL B2 SIZE CAP , TANTAL B2 SIZE CAP , TANTAL B2 SIZE CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP RES , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

1000PF KC 1608 56PF JA 1608 1000PF KC 1608 1000PF KC 1608 6800PF KB 1608 0.022UF KC 1608 220PF JA 1608 0.1UF ZF 1608 7PF D 1608 15PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 1000PF KC 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 1608 SIZE 220PF JA 1608 0.1UF ZF 1608 150PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 15PF JA 1608 15PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 390PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 390PF JA 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608 0.1UF ZF 1608

27

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS C679 C809 C810 C822 C823 C828 C830 C831 C834 C105 C108 C109 C111 C114 C116 C118 C119 C121 C123 C125 C128 C130 C137 C139 C142 C150 C155 C177 C182 C184 C198 C202 C203 C206 C213 C219 C221 C223 C224 C226 C233 C236 C241 C243 C251 C258 C301 C404 C504 C508 C510 C530 C532 C548 C549 C561 C562 C574 C579 C582 C583 HCUS1E104ZF HCUS1E104ZF HCUS1H560JA HCUS1H560JA HCUS1E104ZF HCUS1H220JA HCUS1H150JA HCUS1H150JA HCUS1E104ZF CCEA1CH470T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH470T CCEA1CH470T CCEA1CH470T CCEA1CH101T CCEA1CH470T CCEA1CH101T CCEA1CH470T CCEA1CH470T CCEA1CH101T CCEA1CH470T CCEA1CH470T CCEA1CH470T CCEA1CH221T CCEA1CH470T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH470T CCEA1CH470T CCEA1CH470T CCEA1CH470T CCEA1HH4R7T CCEA1CH101T CCEA1CKS470T CCEA1CH221T CCEA1CH221T CCEA1HH4R7T CCEA1CH221T CCEA1CH221T CCEA1CH221T CCEA1CH221T CCEA1CH100T CCEA1HH1R0T CCEA1CH221T CCEA1CH221T CCEA1CH470T CCEA1CH221T CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , CHIP CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT 0.1UF ZF 1608 0.1UF ZF 1608 56PF JA 1608 56PF JA 1608 0.1UF ZF 1608 22PF JA 1608 15PF JA 1608 15PF JA 1608 0.1UF ZF 1608 47UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 47UF 16V 47UF 16V 47UF 16V 100UF 16V 47UF 16V 100UF 16V 47UF 16V 47UF 16V 100UF 16V 47UF 16V 47UF 16V 47UF 16V 220UF 16V 47UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 47UF 16V 47UF 16V 47UF 16V 47UF 16V 4.7UF 50V 100UF 16V 47UF 16V 220UF 16V 220UF 16V 4.7UF 50V 220UF 16V 220UF 16V 220UF 16V 220UF 16V 10UF 16V 1UF 50V 220UF 16V 220UF 16V 47UF 16V 220UF 16V 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

28

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS C586 C616 C618 C628 C629 C637 C640 C642 C643 C645 C648 C653 C658 C661 C666 C667 C669 C670 C673 C675 C676 C680 C681 C685 C687 C688 C689 C690 C692 C733 C751 C752 C795 C801 C802 C803 C804 C824 C825 C826 C827 C829 C835 C891 Semiconductors D101 D102 D501 D502 D511 D601 D602 D603 IC10 IC11 IC12 IC13 IC14 IC15 HVDRLS4148SR HVDRLS4148SR HVDRLS4148SR HVDRLS4148SR HVDRLS4148SR HVDRLS4148SR HVDRLS4148SR HVDRLS4148SR HVIZR36778 HVILM1117S-3V3 HVILM1117S-1V8 HVILM1117S-3V3 HVILM1117S-1V8 HVIAT24C08N10SC DIODE, SWITCHING, SMD TYPE DIODE, SWITCHING, SMD TYPE DIODE, SWITCHING, SMD TYPE DIODE, SWITCHING, SMD TYPE DIODE, SWITCHING, SMD TYPE DIODE, SWITCHING, SMD TYPE DIODE, SWITCHING, SMD TYPE DIODE, SWITCHING, SMD TYPE IC,MPEG (ZORAN) I.C , REGULATOR (3.3V) I.C , REGULATOR (1.8V) I.C , REGULATOR (3.3V) I.C , REGULATOR (1.8V) I.C RLS4148 TE-11 RLS4148 TE-11 RLS4148 TE-11 RLS4148 TE-11 RLS4148 TE-11 RLS4148 TE-11 RLS4148 TE-11 RLS4148 TE-11 1117S-3.3V LM1117-1V8 1117S-3.3V LM1117-1V8 AT24C08N10SC2.7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA CCEA1CH221T CCEA1CH220T CCEA1CH101T CCEA1CH101T CCEA1CH101T HCQI1H222JZT HCQI1H222JZT CCEA1CH220T CCEA1CH220T HCQI1H222JZT HCQI1H222JZT CCEA1CH220T HCQI1H222JZT HCQI1H222JZT CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH101T CCEA1CH470T CCEA1HH1R0T CCEA1CH221T CCEA1CH101T HCQI1H222JZT HCQI1H222JZT HCQI1H222JZT HCQI1H222JZT HCQI1H222JZT HCQI1H222JZT CCEA1HH3R3T CCEA1CH220T CCEA1CH220T CCEA1CH221T CCEA1AH331T CCEA1AH331T CCEA1CH220T CCEA1CH101T CCEA1HH1R0T CCEA1HH1R0T CCEA1CH470T CCEA1CH470T CCEA1AH471T CCEA1CH221T CCEA1AH471T CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , MYLAR CAP , MYLAR CAP , ELECT CAP , ELECT CAP , MYLAR CAP , MYLAR CAP , ELECT CAP , MYLAR CAP , MYLAR CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , MYLAR CAP , MYLAR CAP , MYLAR CAP , MYLAR CAP , MYLAR CAP , MYLAR CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT CAP , ELECT 220UF 16V 22UF 16V 100UF 16V 100UF 16V 100UF 16V 2200PF 50V J 2200PF 50V J 22UF 16V 22UF 16V 2200PF 50V J 2200PF 50V J 22UF 16V 2200PF 50V J 2200PF 50V J 100UF 16V 100UF 16V 100UF 16V 100UF 16V 100UF 16V 47UF 16V 1UF 50V 220UF 16V 100UF 16V 2200PF 50V J 2200PF 50V J 2200PF 50V J 2200PF 50V J 2200PF 50V J 2200PF 50V J 3.3UF 50V 22UF 16V 22UF 16V 220UF 16V 330UF 10V 330UF 10V 22UF 16V 100UF 16V 1UF 50V 1UF 50V 47UF 16V 47UF 16V 470UF 10V 220UF 16V 470UF 10V 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

29

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS IC16 IC17 IC18 IC19 IC20 IC21 IC22 IC23 IC24 IC40 IC41 IC43 IC44 IC45 IC47 IC51 IC52 IC53 IC54 IC55 IC56 IC57 Q105 Q106 Q108 Q109 Q110 Q307 Q308 Q315 Q404 Q407 Q408 Q501 Q502 Q604 Q606 Q607 Q608 Q609 Q610 Q611 Q612 Q613 Q614 Q615 Q616 Q617 Q618 Q619 Q620 Q621 Q622 Q804 Q805 Q806 Q821 IC50 Q605 IC50 Q605 HVISAA7893HLC2 HVI74VHC04MX HVIM12L64164A7T HVIZR36721 HVITL3472IDR HVIM29W160ET70N HVIM12L64164A7T HVIAM5888SLF HVIZR36707 HVICS4382-KQ BVIBH7862FS HVI74LVC157ADBR HVI74LVC157ADBR HVIST72F324K2 HVITC74HCT7007F HVILM1117S-5.0 HVINJM2068MDTE1 HVILM1117S-3V3 HVINJM2068MDTE1 HVINJM2068MDTE1 HVILM1117S-5.0 HVTHN1K05FU HVTKTA1664YP HVTKTA1664YP HVT2N3904SP HVT2N3904SP HVT2N3904SP HVT2SA1955B HVT2N3904SP HVTKRC107S HVT2N3904SP HVTKRC107S HVTKRA107ST HVTKTA1504SYRTK HVTKTC3875SYRTK HVTKRA107ST HVTKRA107ST HVTKRA107ST HVTKRC107S HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKRA107ST HVTKRC107S HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKTD1304T HVTKTA1504SYRTK HVTKTD1304T HVTKRA107ST HVTKTA1504SYRTK HVIKA79L08AZT HVTKSA916YT HVIKA79L08AZT HVTKSA916YT IC,DSD DECODER (Philips) SAA7893HL/C2 (P I.C , INVERTER 74VHC04M IC, 64M SDRAM (4X16) IC,HDMI TRANSMITTER(ZORAN) IC,OP AMP 8-SOIC (TI) IC,16M FLASH (ST) M29W160ET-70N6 IC, 64M SDRAM (4X16) I. C , Motor Driver(AMtek,Pb free) AM5888S L/F IC,RF (ZORAN) I.C , DAC CS4382-KQ IC , 6CH VIDEO DRIVER ROHM (BH7862FS) I.C , MULTIPLEXER SN74LVC157A I.C , MULTIPLEXER SN74LVC157A IC,FLASH (ST) I.C TC74HC7007AFEL IC REGULATOR/SOT-223 I.C , OP AMP NJM2068MD-TE1 I.C , REGULATOR (3.3V) 1117S-3.3V I.C , OP AMP NJM2068MD-TE1 I.C , OP AMP NJM2068MD-TE1 IC REGULATOR/SOT-223 MOS FET HN1K05FU TRANSISTOR TRANSISTOR TR, CHIP (KEC) 2N3904S-RTK/PS TR, CHIP (KEC) 2N3904S-RTK/PS TR, CHIP (KEC) 2N3904S-RTK/PS TRANSISTOR, TE85L,F, SSM Type, hFE=BTE85L,F SSM TYP TR, CHIP (KEC) 2N3904S-RTK/PS TRANSISTOR , CHIP TR, CHIP (KEC) 2N3904S-RTK/PS TRANSISTOR , CHIP TRANSISTOR , CHIP KRA107S TRANSISTOR , CHIP KTA1504S Y RTK TRANSISTOR , CHIP KTC3875S Y RTK TRANSISTOR , CHIP KRA107S TRANSISTOR , CHIP KRA107S TRANSISTOR , CHIP KRA107S TRANSISTOR , CHIP TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP KRA107S TRANSISTOR , CHIP TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP KTA1504S Y RTK TRANSISTOR , CHIP (MUTE) KTD1304 TRANSISTOR , CHIP KRA107S TRANSISTOR , CHIP KTA1504S Y RTK REGULATOR, -8V KA79LXXAZTA TRANSISTOR REGULATOR, -8V KA79LXXAZTA TRANSISTOR 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

30

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS D103 D104 D105 D107 D109 D110 D401 IC46 IC49 IC61 Resistors R100 R101 R102 R103 R104 R105 R106 R107 R108 R109 R110 R111 R112 R113 R114 R115 R116 R117 R118 R119 R120 R121 R122 R123 R124 R125 R126 R127 R128 R129 R130 R131 R132 R133 R134 R135 R136 R137 R138 R139 R140 R141 R142 R143 R144 R145 R146 R147 CRJ10DJ472T CRJ10DF4700T CRJ10DJ0R0T CRJ10DF4300T CRJ10DF3920T CRJ10DJ0R0T CRJ104DJ101T CRJ10DJ330T CRJ10DJ101T CRJ10DJ472T CRJ10DJ332T CRJ104DJ330T CRJ10DJ202T CRJ10DJ202T CRJ10DJ121T CRJ10DJ0R0T CRJ10DJ121T CRJ10DJ121T CRJ10DJ103T CRJ10DJ330T CRJ10DJ123T CRJ10DJ221T CRJ10DJ221T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ113T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ121T CRJ104DJ330T CRJ104DJ330T CRJ10DJ330T CRJ10DJ0R0T CRJ10DF3920T CRJ10DJ103T CRJ10DJ100T CRJ10DJ221T CRJ10DJ221T CRJ10DJ100T CRJ10DJ472T CRJ10DJ133T CRJ10DJ474T CRJ10DJ474T CRJ10DJ330T CRJ10DJ330T CRJ10DJ750T CRJ10DJ0R0T CRJ10DJ104T RES , CHIP RES, CHIP 470 OHM/1608/1% RES , CHIP RES RES. CHIP (392R 1%) RES , CHIP RES, ARRAY, 100R (1608) RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , 4ARRAY (1608*4) RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , CHIP RES , CHIP RES. CHIP (392R 1%) RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 100R (1608) 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 33 OHM/1608*4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA KVD1N4003ST KVD1N4003ST KVD1N4003ST KVD1N4003ST KVD1N4003ST KVD1N4003ST CVD50BOBBWGA BVIKP1010B HVIKIA7808API HRVKSM603TH2 DIODE DIODE DIODE DIODE DIODE DIODE L.E.D , 2 COLOR (ORG , BLUE) IC, PHOTO COUPLER REGULATOR, +8V SENSOR IR 1N4003 1N4003 1N4003 1N4003 1N4003 1N4003 TOL-50BOBBWGA KIA7808 (KEC) KSM-603TH2 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA

1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 33 OHM/1608*4 33 OHM/1608*4 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE

31

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS R148 R149 R150 R151 R152 R153 R154 R155 R156 R157 R158 R159 R160 R161 R162 R163 R164 R165 R166 R167 R168 R169 R170 R171 R172 R173 R174 R175 R176 R177 R178 R180 R181 R182 R183 R184 R185 R186 R187 R188 R189 R190 R191 R192 R193 R194 R195 R196 R197 R198 R199 R200 R201 R202 R203 R204 R205 R206 R207 R209 R210 CRJ10DJ750T CRJ104DJ470T CRJ104DJ470T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ101T CRJ10DJ101T CRJ10DJ0R0T CRJ104DJ101T CRJ10DJ472T CRJ10DJ330T CRJ10DJ0R0T CRJ104DJ330T CRJ104DJ330T CRJ104DJ330T CRJ10DJ330T CRJ10DJ330T CRJ10DJ330T CRJ104DJ330T CRJ10DJ750T CRJ104DJ330T CRJ104DJ330T CRJ104DJ330T CRJ104DJ330T CRJ10DJ472T CRJ10DJ912T CRJ10DJ132T CRJ10DJ132T CRJ10DJ272T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DF1202T CRJ10DJ471T CRJ10DJ332T CRJ10DJ332T CRJ10DJ332T CRJ10DJ113T CRJ10DJ105T CRJ10DJ223T CRJ10DJ223T CRJ10DJ103T CRJ10DJ332T CRJ10DJ330T CRJ10DJ101T CRJ10DJ472T CRJ10DJ753T CRJ10DJ0R0T CRJ10DJ330T CRJ10DJ330T CRJ10DJ472T CRJ10DJ622T CRJ10DJ562T CRJ10DJ562T CRJ10DJ562T CRJ10DJ103T CRJ10DF4700T CRJ10DF1002T CRJ10DF1002T RES , CHIP RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES, ARRAY, 100R (1608) RES , CHIP RES , CHIP RES , CHIP RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , CHIP RES , CHIP RES , CHIP RES , 4ARRAY (1608*4) RES , CHIP RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP 1% RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES, CHIP 470 OHM/1608/1% RES , CHIP 1% RES , CHIP 1% 1608 SIZE 47 OHM 47 OHM 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 100R (1608) 1608 SIZE 1608 SIZE 1608 SIZE 33 OHM/1608*4 33 OHM/1608*4 33 OHM/1608*4 1608 SIZE 1608 SIZE 1608 SIZE 33 OHM/1608*4 1608 SIZE 33 OHM/1608*4 33 OHM/1608*4 33 OHM/1608*4 33 OHM/1608*4 1608 SIZE 9.1K OHM/1608 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 10K /1/10W/F 10K /1/10W/F 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

32

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS R211 R212 R213 R214 R215 R216 R217 R218 R219 R220 R221 R222 R223 R224 R225 R226 R227 R228 R230 R241 R243 R244 R265 R284 R285 R287 R297 R298 R299 R301 R302 R303 R305 R306 R307 R308 R309 R377 R404 R409 R410 R412 R413 R414 R415 R416 R417 R418 R419 R420 R421 R422 R423 R424 R425 R501 R502 R503 R504 R505 R506 CRJ10DF1002T CRJ104DJ330T CRJ104DJ330T CRJ104DJ330T CRJ104DJ330T CRJ104DJ330T CRJ10DJ330T CRJ104DJ330T CRJ10DJ273T CRJ10DJ562T CRJ10DJ562T CRJ10DJ562T CRJ10DJ103T CRJ10DJ472T CRJ10DJ330T CRJ10DJ330T CRJ10DJ330T CRJ10DJ330T CRJ10DJ472T CRJ10DF75R0T CRJ10DF75R0T CRJ10DF75R0T CRJ10DJ472T CRJ10DJ472T CRJ10DJ472T CRJ10DJ113T CRJ10DJ0R0T CRJ10DJ103T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ472T CRJ10DJ0R0T CRJ10DJ272T CRJ10DJ102T CRJ10DJ102T CRJ10DJ221T CRJ10DJ333T CRJ10DJ100T CRJ10DJ103T CRJ10DJ681T CRJ10DJ821T CRJ10DJ122T CRJ10DJ152T CRJ10DJ222T CRJ10DJ332T CRJ10DJ472T CRJ10DJ221T CRJ10DJ750T CRJ10DJ680T CRJ10DJ121T CRJ10DJ820T CRJ10DJ4R7T CRJ10DJ332T CRJ10DJ182T CRJ10DJ182T CRJ10DJ103T CRJ10DJ473T CRJ10DJ470T CRJ10DJ271T RES , CHIP 1% RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , 4ARRAY (1608*4) RES , CHIP RES , 4ARRAY (1608*4) RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES, CHIP 1% 75 OHM RES, CHIP 1% 75 OHM RES, CHIP 1% 75 OHM RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP 10K /1/10W/F 33 OHM/1608*4 33 OHM/1608*4 33 OHM/1608*4 33 OHM/1608*4 33 OHM/1608*4 1608 SIZE 33 OHM/1608*4 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 75 OHM, 1% 75 OHM, 1% 75 OHM, 1% 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE

33

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS R511 R512 R513 R514 R515 R516 R517 R518 R519 R522 R533 R544 R549 R552 R553 R564 R593 R600 R601 R602 R603 R604 R605 R606 R607 R608 R609 R611 R612 R618 R619 R620 R621 R622 R623 R624 R625 R626 R627 R628 R629 R630 R631 R632 R633 R641 R642 R650 R651 R652 R653 R654 R655 R656 R657 R658 R659 R660 R661 R662 R663 CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ103T CRJ10DJ100T CRJ10DJ103T CRJ10DJ103T CRJ10DJ103T CRJ10DJ103T CRJ10DJ473T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ105T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ472T CRJ10DJ0R0T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ0R0T CRJ10DJ332T CRJ10DJ332T CRJ10DJ101T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ102T CRJ10DJ332T CRJ10DJ332T CRJ10DJ332T CRJ10DJ102T CRJ10DJ332T CRJ10DJ221T CRJ10DJ221T CRJ10DJ104T CRJ10DJ104T CRJ10DJ224T CRJ10DJ224T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ102T CRJ10DJ332T CRJ10DJ332T CRJ10DJ332T CRJ10DJ102T CRJ10DJ332T CRJ10DJ102T CRJ10DJ102T CRJ10DJ104T CRJ10DJ104T RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE

34

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS R664 R665 R666 R667 R668 R669 R670 R671 R672 R673 R674 R675 R676 R677 R678 R679 R680 R681 R682 R683 R684 R685 R686 R687 R688 R689 R690 R691 R692 R694 R695 R698 R699 R726 R727 R728 R729 R730 R731 R732 R733 R734 R735 R736 R737 R738 R739 R744 R745 R746 R747 R748 R749 R801 R802 R803 R806 R816 R817 R818 R821 CRJ10DJ102T CRJ10DJ102T CRJ10DJ102T CRJ10DJ102T CRJ10DJ104T CRJ10DJ104T CRJ10DJ102T CRJ10DJ102T CRJ10DJ332T CRJ10DJ102T CRJ10DJ332T CRJ10DJ102T CRJ10DJ102T CRJ10DJ102T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ132T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ101T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ0R0T CRJ10DJ132T CRJ10DJ132T CRJ10DJ474T CRJ10DJ221T CRJ10DJ223T CRJ10DJ221T CRJ10DJ221T CRJ10DJ221T CRJ10DJ221T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ224T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ222T CRJ10DJ0R0T CRJ10DJ820T CRJ10DJ0R0T CRJ10DJ820T CRJ10DJ390T CRJ10DJ750T CRJ10DJ750T CRJ10DJ0R0T RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

35

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS R823 R824 R825 R826 R827 R828 R829 R830 R832 R833 R834 R878 R879 R895 R896 Miscellaneous CVICEF04N6YA HOX27000E180S KJP24GA195ZM HJJ9H003Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLQ06E100KRZ HLQ06E100KRZ HLQ06E100KRZ HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R006Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z BLZ9R004Z BLZ9R004Z BLZ9R004Z BLZ9R004Z HLZ9R001Z HLZ9R001Z FET. HEAT SINK ASS`Y CRYSTAL , CHIP(27MHZ,SMD) SMT FFC/FPC WAFER(0.5MM PITCH) JACK,HDMI (JALCO) FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER INDUCTOR , CHIP INDUCTOR , CHIP INDUCTOR , CHIP FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER BEAD , CHIP FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER BEAD CHIP 90 OHM (2012 SIZE) BEAD CHIP 90 OHM (2012 SIZE) BEAD CHIP 90 OHM (2012 SIZE) BEAD CHIP 90 OHM (2012 SIZE) FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER For Q901 HC-49/US 52559-2472 (PB YKF45-7009 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 3225 SIZE 3225 SIZE 3225 SIZE 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A ACM2012H-900 ACM2012H-900 ACM2012H-900 ACM2012H-900 600E, 1.5A 600E, 1.5A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA CRJ10DJ0R0T CRJ10DJ750T CRJ10DJ101T CRJ10DJ222T CRJ10DJ221T CRJ18AJ221T CRJ10DJ104T CRJ10DJ390T CRJ10DJ102T CRJ10DJ750T CRJ10DJ820T CRJ10DJ104T CRJ10DJ101T CRJ10DJ221T CRJ10DJ680T RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP RES , CHIP 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1608 SIZE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

X101 CN11 JK07 L101 L102 L103 L104 L105 L106 L107 L109 L110 L111 L112 L113 L114 L115 L116 L117 L118 L119 L120 L121 L122 L123 L124 L125 L126 L127 L128 L217 L518 L519 L520 L521 L522 L601 L602 L603 L604 L610 L611

36

Ref. Designator

Part Number

Description

Qty

MAIN/FRONT PCB ASS'YS L612 L613 L614 L615 L616 L617 L696 L801 L804 L805 L806 L808 L809 S401 S402 S403 S404 S405 S406 S407 S408 BN01 BN07 CN01 CN03 CN05 CN07 CN12 CN13 ET01 ET02 F401 JK01 JK02 JK03 JK04 JK06 JK08 X501 HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLZ9R001Z HLQ08ER68KRZ HLQ09E8R2KRZ HLQ08ER68KRZ HLQ08ER39KRZ HLZ9R001Z HLQ09E8R2KRZ HST1A020ZT HST1A020ZT HST1A020ZT HST1A020ZT HST1A020ZT HST1A020ZT HST1A020ZT HST1A020ZT CMD1A504 CWB1C912060EN CWB1A906190EN CJP15GA117ZY CJP07GA01ZY CJP15GB113ZY CJP06GA19ZY CJP05GA19ZY CJP06GA19ZY CMC1A111 CMC1A111 HFL13BT229GINK CJJ4R041Z CJJ4N067Z CJJ4S043Z CJJ9N003Z HJS9U008Z HJJ1D002Z HOX08000E160C CTB3+10G CTB3+6FFZ CTB3+8G CTW3+8J CUA2A259 CWZDVD37BN91A CJJ8A004Z CWZDVD37BN91 KHG1A050 KHG1A326Z KMC1A264 KBA2C2000TLEY FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER FB, 2012(0805)600E, 1.5A,POWER CHIP FERRITE INDUCTOR CHIP , COIL CHIP FERRITE INDUCTOR CHIP FERRITE INDUCTOR FB, 2012(0805)600E, 1.5A,POWER CHIP , COIL SW , TACT SW , TACT SW , TACT SW , TACT SW , TACT SW , TACT SW , TACT SW , TACT BRACKET , FIP WIRE ASS'Y WIRE ASS'Y WAFER , CARD CABLE WAFER, STRAIGHT, 7PIN WAFER WAFER, STRAIGHT, 6PIN WAFER, STRAIGHT, 5PIN WAFER, STRAIGHT, 6PIN PLATE , EARTH PLATE , EARTH F.I.P 6P JACK, BOARD 2P, JACK JACK , BOARD JACK , (S-VIDEO+VHS) Optical+Coaxial Jack (Gold Plate) JACK, HOSIDEN CRYSTAL 8MHz SCREW SCREW SCREW SCREW CHASSIS, BOTTOM IN-LET WIRE ASS'Y RECEPTACLE,(2.5A 250V AC) UL WIRE ASS'Y RUBBER , CUSHION LUG CUSHION cushion,shield FUSE 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 600E, 1.5A 2012-R68UH 2012-R68UH 2012-R39UH 600E, 1.5A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 3 7 1 1 1 1 4 2 1 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

13-BT-229GINK ( RCA-601DAG-11 RCA-201DAG-01

YKC22-0732N SR7400

DVD37/47 UL1617 AWG#18

F901

EUR (2A/250V)

Miscellaneous/Mechanical CHE154 CJA2A085Z CGWDVD47 CBT1A997 CGL1A240 CGR1A387K128 CLAMPER , ARM AC CORD , IN-LET TYPE(UL) FRONT PANEL ASS'Y KNOB, FUNCTION INDICATOR, POWER DOOR, DVD 0.12 1 1 1 1 1 M EA EA EA EA EA

37

Ref. Designator

Part Number

Description

Qty

Miscellaneous/Mechanical CGUDVD47ZA CGU1A383Z KGB1A164Z CGW2A413RDH43 CGX1A374YC23 CMZ1A105Z CTB3+10G CTB3+6J CWC1B2A15A120B KGB1A158Z CGX1A375ZA CGX1A375M7G32 KGB1A159Z CKC2B166S46 CTBD3+10GFZ CTBD3+8JFC CUADVD47 CHR301 CJDDVD27YA CADSDL003YA CMH1A250 CWB1B905150EE CWB5A906150SE CWC1G2A24G250B CKF3A303Z CKL2A186H43 CMX1A176 WINDOW ASS'Y WINDOW, FIP BADGE, DVD47 PANEL,FRONT ORNAMENT, DOOR FILTER, FIP SCREW SCREW CABLE , CARD BADGE , HARMAN/KARDON(FRONT) BADGE ASS'Y ORNAMENT , BADGE BADGE , HARMAN/KARDON(TOP) CABINET, TOP SCREW , DOT SCREW , DOT BOTTOM CHASSIS ASS'Y CLAMPER MECHANISM ASS'Y LOADER ASS'Y GUIDE, CABLE WIRE ASS'Y WIRE ASS'Y CABLE , CARD PANEL, REAR FOOT INSULATOR, SMPS 1 1 1 1 1 1 5 2 1 1 1 1 1 1 6 4 1 2 1 1 1 1 1 1 1 4 1 EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA

38

42

44

45

46

47