BSS RELATED COMMANDS
********************* For Checking TRU Faults
******************************************
RXTCP : MOTY = RXOTG, CELL = LH11542; ! Show TG Number!
RXCDP: MO=RXOTG-100; ! ShowTG Internal configuration !
RXASP : MO = RXOTG - 100 ; ! Show Alarm Status !
RXMFP :MO=RXOTG-,SUBORD,FAULTY; ! Showe Fault Code !
RXMSP :MO=RXOTRX-34-9,SUBORD; ! Show status information !
******************CF-TG--TRX--TS--TF & DIP(Block/Deblock/ Reset)***********************
RXBLI:MO=RXOCF-xxx, FORCE; ! CF Reset
RXBLE:MO=RXOCF-xxx;
RXBLI: MO= RXOTG-157, FORCE, SUBORD; ! TG Reset !
RXBLE: MO= RXOTG-157, SUBORD;
RXBLI: MO= RXOTRX-157-4, FORCE, SUBORD; ! TRX Reset !
RXBLE: MO= RXOTRX-157-4, SUBORD;
RXBLI: MO= RXOTS-157-4-4, FORCE, SUBORD; ! TS Reset !
RXBLE: MO= RXOTS-157-4-4; !
RXBLI: MO= RXOTF-209, FORCE; ! TF Reset !
RXBLE: MO= RXOTF-209;
DTBLI:DIP=24RBL2; ! DIP Reset !
DTBLE:DIP=24RBL2;
*************** DIP Quality-Error Reset
**************************************************
DTSTP : DIP = 12RBL2; ! Dip Status !
DTQUP : DIP = 12RBL2; ! Dip Quality !
DTQSR : DIP = 12RBL2,DEGR,UNACC; ! Dip Error Reset !
*************** In-Service,Out Of
Service***********************************************
RXBLI: MO= RXOTG-157, FORCE, SUBORD; ! Block the Site !
RXESE: MO=RXOTG-157 ; ! Out Of Service !
RXESI: MO=RXOTG157- ; !Engaged! ! In Service !
RXBLE:MO=RXOTG-157,SUBORD; ! De Block the site !
*************** Halt & Un-Halt Of
Site*************************************************
RLSTP:CELL=QU47721; ! Shows site is Halted or Un-Halted !
RLSTC:CELL=QU47721,STATE=HALTED,CHGR=0&1; ! Halts thwe Site !
RLSTC:CELL=QU47721,STATE=ACTIVE; ! Un-Halt the Site !
*****************For Neighbouring Relationship Between
Cells*******************************
RLNRP: CELL= KA20451, CELLR=ALL, NODATA;
************* DATA PROCESSING SYSTEM FUNCTIONS, CP WORKING STATE,
PRINT ********************
DPWSP;
******************For ET and
KLM***************************************************
! Find DIP No First !
RXAPP:MO=RXOTG-209; ! Show the Devices for TG,Devices/32 = DIP Number !
RADEP:DEV=RBLT2-400; ! Show the ET and SNTINL Number!
! When Dip Number is already Known !
DTDIP:DIP=144RBL2; ! Show the ET Number !
NTCOP:SNT=ETM2-2; ! Show the DIP number using SNTINL !
TPCOP:SNT=ETM2-5; ! Show KLM !
RXMDP: MOTY=RXOTRX; !Provide devices for the connected TRXs,CF& TS !
**************** TO TEST AN MO *************************************************
RXTEI: MO=RXOTRX-120-0; Valid for all except TG
****************** FOR CELL CONFIGURATION
DATA********************************
MGBSP:BSC=ALL; ! Show all BSCs ir MSC !
RLCRP: CELL=ALL; ! Show all Cells in BSC !
RXTCP:MOTY=RXOTG; ! Show all TGs For BSC !
RXMOP: MO=RXOTG-100; ! Gives the Site ID for the specified TG. !
RLNRP:CELL=KS3341,CELLR=ALL,NODATA; !Show cell neighbors!
RXMOP:MO=RXOTX-7-0&&11; !Gives distribution of Radios against cell under specified TG group!
******************* To Enable-Disbale Frequency Hoping
**********************************
RLCHP: CELL=QU84561;
RLCHC: CELL=QU84561, HOP=ON; ! HOP=OFF; !
************ FOR EXTERNAL ALARMS AT A NETWORK
EPREMISES**********************
ALLIP: PRCA=53, ACL=A1; (Its a critical alarm) A1: Class critical!
**************** TO CHECK FOR CELL BARRING (BCCH
DATA)****************************
RLSBP: CELL=WW54891; CB: Cell barred
RLSBP: CELL=ALL;
**************** TO BARR UNBARR A CELL
*******************************************
RLSBC: CELL=WW54891, SB=YES/NO;
************* CONFIGURATION FREQUENCY DATA *********************************
************** FOR BOTH HOPPING AND BARRING STATUS *************************
Plgsp:cell=26261;dtstp:qidtdip==
************** For LOGICAL CHANNEL DETAILS ************************************
RLSLP: CELL=LH12001; NCH: No. of Channels
CBCH: Cell Broadcast Control Channel
BCCH: Broadcast Control Channel
TCH: Traffic Channel
SDCCH: Stand alone Dedicated Control ChannelDT
************************ FOR DATA ABOUT A TRANSCODER POOL *****************
RRTPP: TRAPOOL=ALL; Transcoder:Interface between MSC and BSC.
RRTPP: TRAPOOL=ABC;
****************** FOR GPRS DATA AND ACTIVATION ****************
RLGSP: CELL=WW54891; Print GPRS Status and configuration
RLGSI: CELL=WW54891; Enable GPRS
RLGSE:CELL=WW54891; Disable GPRS
RRGBP: DETAIL;
NSS RELATED COMMANDS
************** FOR Routes Carrying C7 Signaling ******************************
C7LTP: LS=ALL;
C7LDP:LS=2-2048;
! Use E1 Calculator to calculate DIP Number,OR use EXDEP + NTCOP !
DTDIP:DIP=0UPD1&1UPD1;
DTSTP:DIP=0UPD1&1UPD1;
TPCOP:SNT=ET1551-2;
***************** For KLM Using DIP. *************************
DTDIP:DIP=44RBL2; ! Give the ETM2 NumberSNT Number !
TPCOP:SNT=ETM2-1; ! Give the KLM !
***************** For the Dip and KLM no. *************************
STRSP: R= all; !Show All Routes !
STRSP:R=TSG14T1; !Show Route\Device State !
STRDP: R=TSG14T1; ! Show all devices and their staus for route !
STRDP: R=TSG14TI, STATE= IDLE; ! Provide E1s(UPDs) for the route in Idle state only !
EXDEP:DEV=UPD1-9029; !Provide the SNT/Devp OR Use E1 Calculator) !
NTCOP:SNT=ET1551-2; ! Provide the Dip Number !
TPCOP:SNT=ET1551-2; ! Provide KLM !
******************** For SDIP STATE***********************************
TPSTP: SDIP=7ETM2;
******************** For SNT STATE**********************************
NTSTP: SNT=ETM2-7;
********************* For Dip status*************************************
DTSTP: dip = 201upd1;
*********************For Device status for a specific DIP**********************
DTDIP: DIP=312RBL2; ( Would display the SNT NO. for the given DIP)
NTCOP: SNT=ETM2-7; ( Would display the DIPs & Device range for the given SNT)
STDEP: DEV=UPD1-; (Would display the device status for the given range ov devices)
******************* FOR EXTERNAL ALARMS ON AN MSC ***********************
Allip: alcat= power;
Allip: alcat= ext;
******************* For Cell CGI **********************************************
MGCEP:CELL=KA22311;r;
******************** B NO. ANALYSIS *****************************************
Anbsp:b= 30-0426307;
anrsp: rc = 201;
strsp:r= msc01to;
strdp: r= msc01to;
******************** FOR TAKING BACK UP(dump) *******************************
SYBFP: FILE;
SYBUE;
SYBUP: FILE;
SYTUC;
SYBUI;
Ks1216
************************* FOR SIZE ALTERATION ***************************
DBTSP: TAB=SAACTIONS;
SYBUE;
SAAII: SAE= , BLOCK= RMNR, NI= ; To increase the size of a data file in the CP
SAADI:SAE= , BLOCK= RMNR, NI= ; To decrease the size of a data file in the CP
SAALI*; Action list, initiate: to adjust NI to their required value
SAAEP:
********************* For CP State*****************************************
DPWSP;
******************* For C7 link set supervision data ***********************************
C7SUP: LS= ;
********************* For MTP routing supervision data *******************************
C7RUP: DEST= ;
******************** For routing specification of a destination ************************
C7RSP:DEST= ; c7 routing specification, print
******************* To find the SPC of a node *****************************
C7SPP:SP=ALL;
****************** Blocking/deblocking of c7 links **********************************
C7lae: ls=2-6006, slc=00; for blocking/deactivating the links
C7lai: ls=2-6006, slc=00; for deblocking/activating the links
***************** Device and Route DATA commands ******************************
Exdep: dev= ; for dev data wrt route
Exdrp: dev= ; for dev data wrt rp & em
Strsp: r= ; for route data
Strdp: r= ; for route data
Exrop:r= ; For route data
*********************** TO RECTIFY GROUP SWITCH FAULT
***************************
GDSTP; For distributed Goup switch status
GDBLI: UNIT= CLM-0; For blocking the units of the group switch
GDTEI: UNIT= CLM-0;
GDBLE: UNIT= CLM-0; For unblocking the units of the group switch
*********************** FOR RESETING THE ABL DEVICES ON A WHOLE
ROUTE*************
SEQAR: R= MSC03TO; Siezure quality supervision alarm, reset to reset devices blocked due
to poor speech quality
****************** TO RECTIFY TEST SYSTEM ACTIVATED ALARM
************************
Allip: acl=01;MML Will give us the required AD value
Aploc; AP Maintanance, AP local mode, change Starts a shell program and connects to the
AP
Mml d ad -187 Connects to the required AD, do not use semi colon
End test
Exit
******************TO VIEW FILES IN THE L DRIVE***********************************
APLOC;
CD FMS/DATA
And so on and so forth!!
************************************ MONTI
******************************************
EXTPI: BNB=923214005509; (Exchange data, test position, initiate)
MONTI: DEV=UPD1-32318; (Monitoring, initiate)
CON;
/SON;
END;
********************** COMMANDS FOR THE HLR REPORT ************************
SAAEP: SAE=261;
SAAEP: SAE=ALL, BLOCK=ASD;
HGIDP: ALL; (Home location register, subscribers with incompatible data, print)
********************** SOFTWARE FAULT ESCALATION ***************************
SYRIP: SURVEY; software recovery information
SYRIP: EVENT; to specify the software recovery event nDCPo.
LASIP:BLOCK=ALL; to enumerate software blocksP
********************* RP FAULT *********************************************
EXRPP:RP=261;OOI
EXEMP:RP=261,EM=ALL;
REPRI:RP=261; (Repair Function, RP repair, initiate - gives the PCB No.)
REMRI:RP=261, PCB=11; (Repair Function, Manually repair RP, initiate)(put quotation marks
whenever there is a -)
RECRI:RP=261; (Repair Function, Check for RP repair, initiate )
*********************** Charging fault rectification *********************************
ICZAR:CC= 10;
************************ Siezure of Phuddo Alarms *******************************
ACEASE:100:1
*********************** TO SEPARATE THE CP STANDBY SIDE*******************
DPSES;
********************* TO RESTART THE CP ************************************
SYREI: RANK=SMALL/ LARGE/RELOAD
****************** TO FIND THE GTT OF A NO. SERIES (NS) *************************
C7GSP:TT= , NP= , NA= , NS= ;
(TT= Title Translation, NP=Numbering plan, NA=Nature of address indicator, NS= Numbering
Series)
C7GCP:GTRC= ;
(GT routing case)
Answer Pint [PTERM= Primary terminating, PINTER= Primary intermediate, STERM, SINTER]
C7SPP:SP= ;
********************** For Event log ****************************************
Erepp:enum=all; Event reporting, event No.
APG 40 RELATED COMMANDs
****************** TO REBOOT THE APG*******************************************
APLOC;
PRCBOOT
*************** TO CHECK FOR THE PATH OF A FILE ******************************
CPFLS P RCEFILE1
****************** TO VIEW THE ALARMS AT THE ADJUNCT PROCESSOR
******************
APAMP; AP Maintenance data
APLOC;
ALIST AP Alarms listing
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~
CLUSTER NODE The nodes (sides) of the APG
CLUSTER RES The resources (processes) of the APG
CLUSTER RES | FINDSTR -VE ONLINE
PRCSTATE State of the APG (Whether active or passive)
*********************** TO CHECK FOR LI FILES**********************************
APLOC;
CPFLS
CPFLS P RCEFILE1
CD/D L:\FMS\DATA\CPF\TEMPVOLUME\RCEFILE1
DIR
************************* TO MOVE CDR FILES FROM Y DRIVE TO F DRIVE ***********
********************** TO PRINT THE MAINTANANCE DATA OF AN AP*************
APAMP; (AP Maintenance data, print)
******************** TO REMOVE THE AP FILE PROCESSING FAULT
CAUSE FILE TRANSFER FAILED ******************************
APLOC;
ALIST PRINTS THE NODE ALARMS
TRANSFER QUEUE DESTINATION SET
ALOGDESTTQ ALOGDESTDS
CHECK:
AFPLS -L ALOGDESTTQ AFPLS: AP File processing, list files List transfer queues defined
-L: long list
CDHDSLS L ALOGDESTDS CDHDSLS: Common Destination Handling, Destination set, list
ALOGDEST
CDHLS L ALOGDEST CDHLS: Common Destination Handling, Destination, list
Gives the parameters associated with the given Dest
PING 10.3.12.132 The IP Given
OR
CDHVER ALOGDEST Verify the connection to the Dest
APFLS L S ALOGDESTTQ AP File processing, list files
-L: Long list
-S: Specify all files or directories
SOLUTION:
AFPFTI F ALOGDESTTQ AP file processing, manual transfer, initiate
Used to manually transfer files or directories with the status failed.
AFPLS L S ALOGDESTTQ
0321-2918720
RESULT:
ALIST
Kindly execute the following commands regarding the activation of call diverts:
hgsdc:msisdn=923219087588,sud=cfnry-1; hgsdc:msisdn=923219087588,sud=cfu-1;
hgsdc:msisdn=923219087588,sud=cfb-1; hgsdc:msisdn=923219087588,sud=cfnrc-1;
**********************Seizure
Supervision**********************************************
ALLIP:ACL=A2;
SEQAR:R= Route Name;
allip;
allip:alcat=apz;
rlcrp:cell=all;
rlcrp:cell= ;
allip:prca=53;
allip:prca=42;
rxasp:moty=rxotg;
**************************** For Dip ***********************************
rxtcp:moty=rxotg,cell=LH10541;
rxapp:mo=rxotg-29;
radep:DEV= ;
ntcop:snt= ;
dtstp:dip=62rbl2;
********************** For Managed Objects Faulty ************************
rxtcp:moty=rxotg,cell=LH10541;
rxapp:mo=rxotg-29;
dtstp:dip=62rbl2;
rxasp:mo=rxotg-29;
rxmfp:mo=rxotrx-11-4,subord,faulty;
***************** Managed Object Configuration Data Print *****************
rxcdp:mo=rxotg-7; TS configuration
*************************** For Reset of a site ****************************
rxbli:mo=rxotrx-129-3 ,force,subord;
rxtei:mo=rxo;
rxble:mo=rxotrx-129-3 , subord;
***************************** Internal alarm of BSC ********************
rxasp:moty=rxotg;
dpwsp; DATA PROCESSING SYSTEM FUNCTIONS, CP WORKING STATE, PRINT
**************** For Quality Check ***************************************
dtqup:dip=176rbl2;
**************** Managed Objects Capabilities Print ***********************
rxcap:mo=rxotg-263;
*************** Site Reset Command *************************************
rxtcp:moty=rxotg,cell=ka20441;
rxcdp:mo=rxotg-173;
rxmfp:mo=rxocf-173;
rxasp:mo=rxotg-;
rxbli:mo=rxotg-21,subord,force;
rxble:mo=rxotg-,subord;
**************** MSC Commands For Dip *********************************
exdep:dev=upd1 - 9057;
strdp:r=msc02to,state=bloc;
strpl:r=msc02to;
ntcop:snt=et1551-9;
dtstp:dip=283upd1;
tpcop:snt=et1551-1; # For KLM numbers and STM number(Sdip);
***************** HLR COMMANDS *********************************
hgsdp:msisdn=92321 ,all;
hgsdp:msisdn=92321 ,suda;
****************** For Reseting a number in an LHR ***********************
hgslr:msisdn=92321;
************** Cell Status ******************************************
rlstp:cell=all;
************** Cell Halt & Dehalt Command ****************************
rlstp:cell=ka20721;
rlstc:cell=ka20723,state=active,chgr=2;
************** Blocking Supervision Alarm ******************************
strp:r=mobg1to;
strdp:r=mobg1to;
*********** Rp Fault ****************************************************
exrpp:rp=141;
***************** Dup:Backup ******************************************
sybue;
sybue:file;
;
sytuc;
sybue;
************* Digital path Block & Deblock ********************************
dtstp:dip=all,state=abl;
dtbli:dip=dip#;
dtble:dip=dip#;
************* Radio Control Cell,Description Data,Print ********************
rldep:cell=ib30212;
*********** Seizure Quality **********************************************
strdp:r=abopto;
seqr:r=abopto;
************ A Party to B Party Routing Command **************************
anbsp:b=321-321;
anrsp:rc=321;
strsp:r=cca01to;
exdep:dev=upd1-5985;
ntcop:snt=et1551-4;
dtstp:dip=187upd1;
stdep:dev=upd1-5984&&6015;
********** Synchronous Path Quality Supervision *************************
s:sdip=5et1551,es2;
************* C7 Signalling Link Failuer **********************************
c7ltp:ls=all;
strsp:r=ntc04to;
strdp:r=bahpto;
*********** C7 Signalling Block & Deblock *********************************
c7ltp:ls=all;
c7ldp:ls=2-3002;
c7ltp:ls=2-3002;
c7lae:ls=2-3002,slc=2;
c7lai:ls=2-3002,slc=2;
*********** Cell Status **************************************************
rlstp:cell=all;
************* Digital Path Quality Supervision ******************************
dtqsr:dip=all,sfes;
********** Subscriber Refresh Number ************************************
hgsdp:msisdn=93214005506,all;
mgslp:imsi=enter imsi#,all;
hgslr:imsi=enter imsi#;
********* Con Queue Congestion ****************************************
rxmsp:mo=rxocon-;
rxbli:mo=rxocon-;
rxble:mo=rxocon-;
********** Route Dip Checking Procedure(C7link) **************************
Strsp:r=ptcg1to;
c7ltp:ls=all;
c7ldp:ls=2-4416;
exdep:dev=upd1-1136;
ntcop:snt=et1551-2;
dtstp:dip=35upd1;
******* Test Call ********************************************************
extpp;
extpi:bnb=03214411111;
tctdi:bnb=03004102217,dev=udp1-1353,aub=03214411111;
con;
end;
******* Size Alternation **************************************************
dbtsp:tab=saactions;
saacii:sae=263,ni=200;
******* Active Subscriber Information *************************************
mgsvp;
****** B-Numbering Analysis ********************************************
anbsp:b=30-03348950;
anrsp:rc=203;
******** All Destination Information *************************************
c7rsp:dest=all;
************** MSC Related Sites *************************************
mgcep: cell=all;
mgcep:bsc=bsc03 // all msc related site of bsc.
************** E1 route working *************************************
dtstp:dip=250upd1;
dtdip:dip=250upd1;
dtble:dip=250upd1;
tpcop:sdip=9et1551;
tpble:sdip=9et1551,lp=vc12-1;
************** GPRS Activation Command ******************************
hgsdp:msisdn=923215183650,all;
hgcmp:msisdn=923214005942;
hgpdi:msisdn=923215183650,eqosid=1;
hgcmi:msisdn=923215183650,gsa=923210004301,sk=81,gprstdp=12,cch=3,deh=0;
hgsnc:msisdn=923214005942,nam=0,keep;
hgsnc:msisdn=923215183650,nam=0,keep;
Dtstp:dip=0rbl2;
dtbli:dip=0rbl2;
dtdip:dip=0rbl2;
tpstp:sdip=2ETM2;
tpcop:snt=etm2-2;
tpbli:sdip=2etm2,lp=vc12-0;
rlstp:cell=all,state=halted;
allip:alcat=ext;
