Fosroc Trafficguard UR
Skid resistant, flexible, waterproof protection flooring system Uses Trafficguard UR is a modified polyurethane-based traffic deck system designed to provide an added level of protection to, new and existing, heavily trafficked areas such as: Car parks Industrial manufacturing units Warehouses Advantages Flexible and tear resistant Waterproof Seamless Rapid application, reliable and safe Available in a range of colours Description Trafficguard UR is a multi-layer deck protection system comprising a primer, flexible & waterproof Membrane and UV resistant wearing course. All components are applied in the liquid phase and react chemically to form a tough, flexible, waterproof, protective surface. Instructions for use Surface Preparation
constructive solutions
New concrete surfaces should have reached 80% of their intended physical properties - generally only achieved after a minimum curing period of 28 days. Existing concrete surfaces must be prepared to provide a clean, sound substrate. Surfaces should be clean and dry with open capillary, free from laitance, oil & grease, curing compounds or other surface contaminants which may prevent full and proper adhesion of the primer. All blowholes, and other surface undulations greater than 1 mm in depth, should be repaired using Nitomortar FC(B)*. Temperature of the substrate during application must be between 5C and 40C. Priming Apply Trafficguard Primer to the prepared surface at a wet film thickness of 200 microns. Whilst Trafficguard Primer is still wet, seed with Fosroc Anti Slip Grain No. 3 at a rate of 0.4 kg / m2 and allow to cure for 24 hours. Application Membrane Apply Trafficguard Membrane to the primed surface at a wet film thickness of 750 microns. For best results the Trafficguard Membrane should be applied with a notched trowel or squeegee.
Properties Membrane Elongation Tensile Strength (ASTM D412) : (ASTM D412) : >100% 6.0 N/mm
Wearcourse Weathering (30 days) (ASTM G53) Corrosion Resistance (ASTMB117) Humidity Resistance (water Fog exposure)
Whilst the base coat is still wet apply Fosroc Anti Slip Grain No. 1200 at a rate of 0.4 kg / m2. Allow to cure for 12 hours prior to applying the wear course. Wear Course Apply Trafficguard Wear Course to the base coat at a wet film thickness of 140 microns. Allow to cure for 24 hours prior to trafficking. Cleaning Tools and equipment should be cleaned with immediately after use with Fosroc Solvent 102*.
: : :
No change in original appearance No change in original appearance No change in original appearance
Trafficguard UR
Fosroc Trafficguard UR
Estimating Supply Trafficguard Primer Trafficguard Membrane Trafficguard Wear Course Antislip Grains No. 1200, 3 Coverage Trafficguard Primer Trafficguard Membrane Trafficguard Wear Course Antislip Grains No. 1200, 3 : : : : 5.0 m2/litre 1.3 m2/litre 4.7 m2/litre 0.4 kg / m Precautions Health and safety : : : : 9 litre packs 8 litre packs 20 litre packs 25 kg bags Trafficguard Primer, Membrane and wear course and Fosroc Solvent 102 should not come in contact with skin or eyes, nor should they be swallowed. Avoid inhalation of vapours and ensure adequate ventilation. Some people are sensitive to resins, hardeners and solvents. Wear suitable protective clothing, gloves and eye/face protection. Barrier creams such as Kerodex Antisolvent or Rozalex Antipaint provide additional skin protection. Should accidental skin contact occur, remove immediately with a resin removing cream such as Kerocleanse Standard Grade Skin Cleanser or Rozaklens Industrial Skin Cleanser, followed by washing with soap and water - do not use solvent. The use of goggles is recommended, in case of accidental eye contamination, rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately - do not induce vomiting. Fire Technical Support Fosroc offers a full technical support package to specifiers, end users and contractors, as well as on-site assistance in locations all over the world. Limitations Do not proceed with application if precipitation is imminent, temperatures are expected to drop below 7C within 24 hours of application. Trafficguard UR should not be applied onto substrate known to suffer from rising dampness, having R.H. greater than 75% as measured in accordance with BS 8203 Appendix A or having moisture content greater than 5% as measured by a Hammond concrete/mortar moisture tester (type COCO). Do not proceed with application if an osmotic condition is known or is suspected to exist. Fosroc Solvent 102 is flammable. Do not use near a naked flame. Flash points Fosroc Solvent 102 : 33C
Note: The above coverage rates are given for guidance only as actual quantities used will vary depending upon the nature of substrate and conditions on site. Storage Shelf life When stored in warehouse conditions at less than 25C, Trafficguard UR will have a shelf life of 12 months. Avoid storage of material under direct sunlight.
* Denotes the trademark of Fosroc International Limited
See separate data sheet
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the users responsibility to obtain the latest version.
Al Gurg Fosroc LLC
Post Box 657, Dubai United Arab Emirates
Head Office telephone: (+9714) 2039699 Regional offices
Abu Dhabi, Al Gurg Fosroc Bahrain, YBA Kanoo Kuwait, Boodai Oman, Al Amana Qatar, Tadmur telephone: 673 1779 telephone: 17738200 telephone: 4817618 telephone: 24815080 telephone: 4432365
fax: (+9714) 2859649
email: agf@fosroc.com
fax: 673 1449 fax: 17732828 fax: 4832124 fax: 24817554 fax: 4419517
email: abudhabi@fosroc.com email: bahrain@fosroc.com email: kuwait@fosroc.com email: oman@fosroc.com email: qatar@fosroc.com
www.fosroc.com
UAE/0291/10/M
