Tip #1 Superimposing layers.

1)Open up any image to be used as a background

2) Open up another image which you want to superimpose

3) Select the paths pallete. 4) Select the pen tool from the tools pallete. 5) Click on the image so you get something like this.

6) Take your time as this may take some practice to get it right. 7) From the paths pallete, LOAD PATH AS A SELLECTION. 8) Click SELECT>>FEATHER, and choose a # (for this example I used 20). 9) From the paths pallete, select TURN OFF PATH. 10) Copy the selected image by pressing CTRL+C. 11) Now paste the image into the background image pressing CTRL+V. 12) Under the layers pallete, Drag the opacity bar to make the image blend into the background.

Tip #2 Embossing type. Start by creating a new file. Fill it with a light color[/COLOR]

[COLOR=Sienna]Change the foreground color to a darker version of the background color Use the type tool to enter the same type. Select FILTER>>BLUR>>GAUSSION BLUR. For this example I used a value of 1.

Now change the foreground color to white. Use the type tool to enter the type again. This will be the highlight. Select the move tool and possition the white type up and to the left of the darker type.

Select the eye dropper tool and click on the background of the image. use the type tool to once again enter your type.

Select the move toll and move the type between the fore and background type.

Tip #3 Another emboss tip. Start with a new texture or start with a plain color.

Create a new channel and type your text (don't deselect).

Press CTRL+J to defloat your selection and then FILTER>BLUR>GAUSSION BLUR with a setting of 2-4. Your image should look like this

Go back to the layer with your texture and use the FILTER>>RENDER>>LIGHTING EFFECTS filter. Use the following settings (from top to bottom): Omni, Check, 13, 25, 0, 14, 20, #4 Channel, Check, 20. Now hit ok and it should look like this.

To add more contrast, hit SELECT...INVERSE and fill with a solid color

Tip #1 Creating simple drop shadows. Create a new file. Create a new Layer.

On the new layer, create the type font you want to use. Duplicate the layer with the type You should now have 'Layer 1 copy' over 'Layer 1'. Select 'Layer 1' the bottom layer Press Shift+F5 to fill in the type, use black and preserve transparency.

Offset the layer a bit using the move tool

Select FILTER>>BLUR>>GAUSSION BLUR for this example I used 2.5 For a softer shadow select a higher number. Tip #5 Create a beveled button. Create a new file, 100x100 pixels. Use the selection tool, make a square. Choose a dark foreground color and a light background color. With the gradient tool set on Linear. Click on the top-left corner and drag to bottom-right.

Click SELECT>MODIFY>CONTRACT, and enter "6".

Reselect the gradient tool. Click bottom-right to top-left to draw gradient.

Once again click SELECT>MODIFY>CONTRACT, and enter "3". Click on SELECT>FEATHER and enter "2".

With the gradient tool click top-left and drag to bottom-right.[/B]

[B]There you have it. an easy to create button. Tip #6 Cool 3d button. Make a new file 100x100. Using the selection tool on radial, make a circle. Now use the gradient tool and set the type to radial. Select a foreground and background color.

Click on the top-left of the button and drag to the bottom-right.

Now click on SELECT>MODIFY>CONTRACT, and contract selection by 8.

Select LAYER>TRANSFORM>ROTATE 180

Now click on SELECT>MODIFY>CONTRACT, contract by 4 this time. Click on SELECT>FEATHER, and feather the selection by 2.[/B]

[B]Select LAYER>TRANSFORM>ROTATE 180

That's it! Use the text tool to enter text or dingbats to finish. Tip #7 Cutouts without Alienskin filter. Open image you want to create effect on.

Click SELECT>ALL, and press ctrl+j to Create a new Layer Now create another layer 'layer 2' and place between the 'background layer' and 'Layer 1' With the type tool, enter the type you want to use.

Now click SELECT>>INVERSE or (Shft+Ctrl+I) to inverse the selection

Fill the selection with Black, Opacity = 100%, Mode = Normal.

Inverse the selection again. you should now have a selection of the type only. Save the selection as channel 4.

return to the the Layers pallet and make the 'Layer 1' active. Load the selection Channel #4 then press delete. Keeping channel #4 active, make the 'Background Layer' active. Lighten the Background Layer by selecting IMAGE>>ADJUST>>BRIGHTNESS/CONTRAST, set the values to your liking. Return to 'Layer 2' and deselect the type. Select FILTER>>BLUR>>GUASSIAN BLUR. For the example, I used a value of 2.5.

Using the move tool, nudge the Layer up, or down. left, or right. Play with the different settings to get the best effect for your application.

Last edited by sulfi_online : 01-03-2005 at 05:39 AM.

sulfi_online View Public Profile Send a private message to sulfi_online Send email to sulfi_online

Visit sulfi_online's homepage! Find all posts by sulfi_online Add sulfi_online to Your Buddy List #2 01-03-2005, 05:48 AM

sulfi_online
Supervisor Photoshop Tips

Join Date: Aug 2004 Location: Saudi Arabia Posts: 220

Tip #8 Textured buttons. Create a new file, resolution=150ppi, Mode=RGB With the Selection tool, make a new selection.

Click SELECT>>MODIFY>>SMOOTH and enter a number to round the corners of your selection

Save the selection as channel #4, If you plan on adding a drop shadow to your button, copy channel #4 to create channel #5 then make channel #4 active. Click FILTER>>BLUR>>GUASSIAN BLUR and blur the selection in steps ie: 6, 4, 2.

Return to the composite channel, then open the texture you want to use

working with the texture use SELECT>>ALL then go to EDIT>>DEFINE PATTERN return to your new image and load Channel #4. Fill the selection using Pattern, Opacity 100%, Mode normal. Do not deselect the selection.

Select FILTER>>RENDER>>LIGHTING EFFECTS and play with the settings until you get what you want. I have found that unchecking 'White is high' creates a cleaner effect. I used Spotlight, 17, 75, -25, 63, 0, 32,Texture Channel #4, uncheck 'white is high', and 89.

Now you can enter your text or dingbat to finish

Tip #9 Creating borders. Open up the photo or image you want to create a border around

Click on the Quick Mask mode button in the Photoshop toolbox. This will create a Quick Mask channel in the Channels palette. Choose the Rectangular Marquee tool in the Photoshop toolbox. Select an area in the center of the image.

Choose Fill... from the Edit menu. Fill the selection area with black at 100% opacity.

Choose None from the Select menu to deselect the area. Then choose Gaussian Blur... from the Blur submenu in the Filter menu. Use a Radius setting of between 10 and 20 pixels. You have now applied the Gaussian Blur to the Quick Mask channel.

Select a special effects filter from the Filter menu. In this example, I used the Sprayed Strokes. Since you are still in Quick Mask mode and there is nothing selected, only the Quick Mask channel will be effected by the filter.

Click on the Standard selection mode button in the Photoshop toolbox. This will select the area of the image that is not masked by the Quick Mask channel. Fill the area with your background color, and your done.

Tiled backgrounds.

The image we're starting with here (and, feel free to snag that image and do this example along with me) is 100pixels by 100pixels. For this technique, we create a new image that is twice the size of the original (200pixels by 200pixels), with the same resolution (150), same color mode (RGB), and a transparent background. If you're starting with a gif, it might be wise to change it's mode from Indexed to RGB to help stop color shifts and *blocky* pixels. Start by dropping your tile in the bottom right corner. It doesn't always have to be this corner, but you'll have to change the steps and placements of the next layers to make it work. For now, just use the bottom right corner. To *drop* the tile, click on the move tool, then click on the image itself... drag

that image over to your new project until you see the edges of the new project light up. You could also copy and paste it there, but this is easier

Make 3 copies of this layer, so that now you have 4 layers with the same thing.

Move the first copy up to the top right corner. Go to Layer>>Transform>>Flip Vertical. This will set the whole right side. If it isn't completely in place, don't worry about that now. We can fix it later =] Now go to the second copy, and move it to the top left side. Go to Layer>Transform>Rotate 180. Go to the last copy (3rd), and move it over to the bottom left corner. Layer>Transform>Flip Horizontal. This will finish up the seamless tile, but if your blocks aren't quite touching each other, the easiest way to fix this is to click the move tool (you should already have that one selected), then use the little arrow keys on your keyboard to nudge it into place. Here's what I made out of the first image: