JIG SAW BLADE SELECTION GUIDE
KNOBS & PULLS. ARCHITECTURAL KITCHEN & BATH
WOOD
KEYBOARDS, DESK ITEMS, LIFTS, LIGHTING HINGES CASTERS, LEGS TABLE BASES BRACKETS, DRAWER SLIDES STANDARDS, TUBES, FITTINGS
METAL
FASTENERS, CONNECTORS, HANGERS CATCHES & LOCKS MOLDING, EDGEBANDING, DOOR TRACK, TAPE, GLUES, DOOR HARDWARE SAFETY EQUIP.
PLASTIC
THE "PROGRESSOR" JIGSAW BLADE SERIES by BOSCH (Not listed in the above chart)
Progressor Blade 1
A General Purpose - Universal Blade Use: Wood with nails up to 3-1/8"; Plastics, aluminum and non-ferrous metals up to 1-5/16". 5" Long Blade. Features: 1) Plunger tip for fast, precise plunge cuts. 2) Teeth are milled and side set. 3) Progressive tooth pitch from small to large. U/M: Each (Minimum = 5 Blades)
Progressor Blade 2
A Metal-Cutting - General Purpose Blade Use: World's fastest-cutting metal jigsaw blade for metal. Can also be used to cut wood up to 2-5/16" and plastics up to 1-3/16". 4" Long Blade. Features: 1) Tilted angle blade design for longer life and fast cutting. 2) Progressive tooth pitch from small to large. U/M: Each (Minimum = 5 Blades)
TOOLS CONESTOGA WOOD DOORS & COMPONENTS
OUT #: BLA-T345XF
OUT #: BLA-T123X
HARDWARE
CORPORATION
132 Beaver Brook Road Lincoln Park, NJ 07035
(800) 631-2443 (973) 317-1400 Fax (973) 317-1444/1445
1149
TOOLS: Jig Saw Blades by BOSCH
Side set and Milled Teeth
Quick, medium rough cuts in hardwood, softwood, aluminum, plastics and non-ferrous metals.
Side set and Ground Teeth
Clean, quick cuts in wood and plastics.
Wavy and Milled Teeth
Fine, straight cuts in plywood, soft steel, aluminum, non-ferrous metals and plactics.
Taper Ground Teeth
Taper ground for precise, fine and clean cuts in wood and plastic.
ORDERING INFORMATION U/M = Each (Minimum = 5 Blades) Packed on a card.
WOOD CUTTING High Carbon Steel JIG SAW BLADES
TEETH TYPE OF RECOMMENDED APPLICATIONS: PER INCH TEETH Wood Other ================================================================================================================== BLA-T101B 4" 10 Taper Ground Very, Clean cuts Plastic or BLA-BULK-T101B (100 blades) BLA-T101D 4" 6 Taper Ground or BLA-BULK-T101D (100 blades) BLA-T301CD BLA-T111C BLA-T119B BLA-T119BO plasticsCurve BLA-T144D BLA-T244D BLA-T101AO 4" 4" 3" 6 6 20 4-5/8" 4" 3" 3" 8 8 12 12 Taper Ground Side Set + Milled Wavy + Milled Wavy + Milled Side Set + Milled Side Set + Ground Alternate Ground Fast, Clean cuts Fast, Clean parallel cuts Medium, rough cut to 2-3/8" Medium cut in wood & plywood Scroll cuts Fast, Rough cuts to 2-3/8" Curve cutting fast, rough to 2-3/8" Fine finishing in wood, plywood, & veneers Down cut no top splintering Plastic Straight cuts in plastics Straight rough cuts in plastic Straight cuts in plastics Curve cuts in plastics BLADE APPEARANCE OUT # LENGTH
Laminates and plastics Laminates and plastics
BLA-T101BR 4" 10 Taper Ground or BLA-BULK-T101BR (100 blades)
METAL CUTTING High Speed Steel JIG SAW BLADES
BLADE TEETH TYPE OF RECOMMENDED APPLICATIONS: LENGTH PER INCH TEETH Metal Other ================================================================================================================= BLA-T118A 3" 24 Wavy + Less than 1/8" mild steel & Plastic, Milled Non-ferrous Linoleum BLA-T118B BLA-T118G BLA-T318A BLA-T318B BLA-T101A BLA-T127D BLA-T227D 3" 3" 5-1/4" 5-1/4" 4" 4" 4" 14 36 24 14 14 8 8 Wavy + Milled Wavy + Milled Wavy + Milled Side Set + Milled Taper Ground Side Set + Milled Side Set + Milled To 1/4" mild steel & Non-ferrous metals To 1/16" mild steel & Non-ferrous metals Less than 1/8" mild steel & Non-ferrous metals To 1/4" mild steel & Non-ferrous metals Less than 3/8" aluminum & Non-ferrous metals Less than 1/4" mild steel & Non-ferrous metals Curve Cutting, mild steel & Non-ferrous metals Reinforced Plastics Reinforced Plastics Plastics BLADE APPEARANCE OUT #
1150
HARDWARE CORPORATION
132 Beaver Brook Road Lincoln Park, NJ 07035
(800) 631-2443 (973) 317-1400 Fax (973) 317-1444/1445
TOOLS: Jig Saw & Reciprocating Saw Blades by BOSCH
ORDERING INFORMATION U/M = Each (Minimum = 5 Blades) Packed on a card.
KNOBS & PULLS. ARCHITECTURAL
BI-METAL CUTTING JIG SAW BLADES
TEETH TYPE OF PER INCH TEETH RECOMMENDED APPLICATIONS: ================================================================================================================= B L A - T 1 1 8 A F 3" 24 Milled + Metal: Less than 1/8" mild steel & Wavy Set Non-ferrous Other: Curve cutting B L A - T 1 1 8 E F 3" 18 Milled + Metal: To 3/16" mild steel & Non-ferrous Wavy Set Other: Contoured shapes and tubing BLADE APPEARANCE OUT # LENGTH
KITCHEN & BATH KEYBOARDS, DESK ITEMS, LIFTS, LIGHTING
BLA-T118BF BLA-T111CF BLA-T211HF BLA-T144DF BLA-T101BF
3" 4" 3" 4" 4"
14 8 10 6 10
Milled + Wavy Set Milled + Side Set Milled + Side Set Side Set Ground Taper Ground +
Wood: Nail embedded wood Metal: To 1/4" mild steel & Other: Plastics Wood: Medium to rough cuts Other: Plastics Wood: Curve Cutting
Non-ferrous
HINGES
Wood: Fast rough cuts and nail-embedded Other: Particle and fiber board
CASTERS, LEGS TABLE BASES
Wood: Clean cuts Metal: Non-ferrous Other: Reinforced plastics
BRACKETS, DRAWER SLIDES STANDARDS, TUBES, FITTINGS
BI-METAL CUTTING RECIPROCATING SAW BLADES
TEETH TYPE OF BLADE APPEARANCE OUT # LENGTH PER INCH TEETH RECOMMENDED APPLICATIONS: ================================================================================================================== BLA-S611DF 6" 6 Side Set Wood: Roughing, fast work, nail-embedded Ground knotty wood Other: Plastic, fiber, particle board
BLA-S1511DF
9"
Side Set Wood: Roughing, Ground knotty wood Other: Plastic, Side Set Wood: Roughing, Ground knotty wood Other: Plastic,
fast
work,
nail-embedded board
fiber, fast
particle
FASTENERS, CONNECTORS, HANGERS
BLA-S1411DF
12"
work,
nail-embedded board
fiber,
particle
BLA-S811DF BLA-S1118VF BLA-S922EF BLA-S1122EF BLA-S918BF
6" 9" 6" 9" 6"
6 10/14 18 18 14
Side Set Wood: Nail-embedded, course cuts Ground Other: Insulating board & Plastic V a r i a b l e Metal: Raker Other: Raker Raker Raker Over 1/8" Contoured shapes and tubing
CATCHES & LOCKS
Metal: All metal 1/8" to 3/16" thick Other: Contoured shapes and tubing Metal: All metal Other: Contoured Metal: All metal Other: Contoured 1/8" to 1/4" thick shapes and tubing 1/8" to 1/4" thick shapes and tubing
MOLDING, EDGEBANDING, DOOR TRACK, TAPE, GLUES, DOOR HARDWARE SAFETY EQUIP.
METAL ONLY High Speed Steel Blades for Reciprocating Saws
TEETH TYPE OF BLADE APPEARANCE OUT # LENGTH PER INCH TEETH RECOMMENDED APPLICATIONS: ================================================================================================================== BLA-S918E 6" 18 Raker Metal: All metals from 1/8" to 3/16" Other: Contoured shapes and tubing
BLA-S918A
6"
24
Wavy + Milled
Metal: All metals from 1/8" to 3/16" Other: Contoured shapes and tubing
TOOLS
WOOD ONLY High Carbon Steel Blades for Reciprocating Saws
OUT # LENGTH TEETH TEETH (5 Blades) PER INCH SPECS RECOMMENDED APPLICATION =================================================================================================================== BLA-S1344D 12" 6 SS & Ground Wood: Fast, clean in both hard and soft woods HCS Other: Plastics and tubing BLADE APPEARANCE
CONESTOGA WOOD DOORS & COMPONENTS
HARDWARE
CORPORATION
132 Beaver Brook Road Lincoln Park, NJ 07035
(800) 631-2443 (973) 317-1400 Fax (973) 317-1444/1445
1151
