REFERENCES
142
References
[1]
Alan M Russell and Kok Loong Lee; Structureproperty relations in nonferrous metals; John Wiley & Sons, Inc., Hoboken, New Jersey; (2005) 179 Gerd Ltjering and James C. Williams; Tianium, 2nd Edition, Springer; (2007) 2 Peter Richard Mezger; Corrosion behavior of dental casting alloys; Katholieke Universities Nijmegen; (1989) 108 Matthew J Donachie, Jr; Titanium: A technical Guide, 2nd Edition; ASM International; (2000) 5 Harry Chandler; Metallurgy for non-metallurgist; ASM international, Materials Park, 44073- 0002, USA; (2006) 81 Donald R Askeland, Pradeep P Fulay and Wendelin J. Wright; The science and engineering of Materials science; 6th Edition, Cenage Learning. Inc, (2010); 556 Pierre Roberge; Handbook of Corrosion Engineering; 2nd Edition, McGraw Hill Professional; (2012); 753 Boyer R R; An Overview on the use of Titanium in the Aerospace Industry; Materials Science and Engineering; A 213 (1996) 103-114 Flacke C Campbell; Light materials: Understanding the Basics; ASM International; (2012) 554 C Leyens and M. Peters; Titanium and titanium alloys: Fundamentals and applications; WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim; (2003) 22 Boyer R, Welsch G. and Collings E.W; Materials properties Handbook: Titanium Alloys; ASM international, Materials Park, OH 44073-0002, USA, (1994) 483 K Rajagopal; A textbook of Engineering Physics, Part-III; Miscellaneous article about transus temperature; Ti-6Al-4V Titanium alloy; Arcam AB; Sweden; (2010) 2 I Weiss and S.L. Semiatin; Materials Science and Engineering; A 243 (1998) 4665 Khan M A, Williams R L Williams D F; In vitro corrosion and wear of titanium alloys in the biological environment; Biomaterials; 17 (1996) 211726 Rhines F N; Phase diagrams in metallurgy: their development and application; McGraw-Hill, New York; (1956) 71
143
[2] [3]
[4]
[5] OH [6]
[7]
[8]
[9]
[10]
[11]
[12] [13]
[14] [15]
[16]
References [17] Kikuchi M, Takada Y, Kiyosue S, Yoda M, Woldu M, Cai Z, Okuno O, Okabe T; Mechanical properties and microstructures of cast TiCu alloys; Dent Mater 19 (2003) 17481 Masih et al; Titanium alloy with solutive and intermetallic reinforcement; United States Patent; 5792288 (1998) 4 S Gollapudi et.al; Material science and engineering; A 528 (2011) 6974-6803 C Ohkubo et al; Biomaterials; 24 (2003) 33773381 M Koike and T Okabe; Properties characterization of cast Ti-Al-Cu alloys for dental applications; Medical devices materials IV; ASM international; California; USA; (2008) 109-113 S A Souza, C R M Afonso and P L Ferrandini; Materials Science and Engineering; C 29 (2009) 1023-1028 Boyer R R; J R Davis Eds., Titanium and Titanium alloys-Metals handbook Desk Edition, 2nd Edition; ASM International; (1998) 575-588 Z Guo, S Malinov, W Sha; Computational Materials Science; 32 (2005) 112 N S Reddy, C S Lee, J H Kim, S.L Semiatin, Materials Science and Engineering A 434 (2006) 218226 Furuhara T and Maki T; Mater Sci Eng; A 312 (2001) 145 Flacke C Campbell; Light materials: Understanding the Basics; ASM International; (2012) 277 Reddy N S; Lee C.S.; Kim, J.H.; Semiatin, S.L, Materials Science & Engineering A., 434; 1-2 (2006) 218-226 C F Yolton, F H Froes and R.F Malone; Metallurgical Transactions A; 10A (1979) 132 RTI International Metals, Inc., Titanium alloy guide, Niles, OH, USA); (2000) American Laboratory; A buyers manual; Science, International Communication Inc; Academic press, New York; 10 (1978) 58 R Mythili et.al; Materials Science and Engineering; A 390 (2005) 299-312 ISIJ Journal; Material Science, Iron and Steel Institute of Japan, 30 (1990) 7-12 Polmear I J; Light alloys: Metallurgy of the light metals, 3rd Edition, Arnold, and London; (1995)
144
[18]
[19] [20] [21]
[22]
[23]
[24] [25]
[26] [27]
[28]
[29] [30] [31]
Scientific
[32] [33] [34]
References [35] R I Jaffie; N E Promisel (Eds); The Science, Technology and Applications of Titanium; Pergammon Press, New York; (1966) John J Buke; Fatigue: Environment and temperature Effects, Springer, (1919) 266 Matthew J Donachie, Jr; Titanium: A technical Guide, 2nd Edition, ASM International, (2000) 56 Joseph R Davis, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, 10th Edition, 2 (1990) Robbin Gourley, Chuck walker; Brazing and Soldering 2012, IBSC Proceedings of 5th Intl. Conference; ASM international and ASM welding Society; USA, (2012) 427 J R Davis; Handbook of Materials for Medical Devices; ASM International; Materials park; OH 44073-0002, USA; (200) 39 F C Campbell; Light weight materials-Understand the basics; ASM International; Materials park, OH 44073-0002, USA; (2012) 244 F C Campbell; Elements of Metallurgy and Engineering Alloys; ASM International; Materials park, OH 44073-0002, USA; (2008) 530 G W Rodney, F Boyer, E W Collings; Materials Properties Handbook: Titanium Alloys; ASM International; Materials park, OH 44073-0002, USA; (1994) 165 M J Donachie Jr; Titanium: A Technical Guide; 2nd Edition; ASM International; Materials park, OH 44073-0002, USA; (2000) 98 F C Campbell; Light weight materials-Understand the basics; ASM International; Materials park, OH 44073-0002, USA; (2012) 232 J R Davis; Heat-Resistant Materials; ASM Specialty Handbook; ASM International; Materials park, OH 44073-0002, USA; (1999) 350 F C Campbell; Light weight materials-Understand the basics; ASM International; Materials park, OH 44073-0002, USA; (2012) 234 M J Donachie Jr; Titanium: A Technical Guide; 2nd Edition; ASM International; Materials park, OH 44073-0002, USA; (2000) 18 J R Davis; Alloying: Understanding the Basics; ASM International; Materials park, OH 44073-0002, USA; (2001) 5, 419 J K Wessel; The handbook of advanced materials: Enabling new designs; John Wiley & Sons; New Jersey; (2004) 279
145
[36] [37]
[38]
[39]
[40]
[41]
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[49]
[50]
References [51] Hugh Baker; Alloy Phase Diagrams; ASM Handbook; ASM International; Materials Park, OH 44073-0002, USA; 03 (1992) Srikant Gollapudi; Creep Mechanisms in Titanium Alloy Tubing; UMI, (2008) Unknown author; Titanium and titanium alloys subject guide, ASM International, Materials Park, OH 44073-0002, USA Sami M. El-Soudani; Three phase - titanium alloy microstructure; US 5849112 A; (1998) U.S. Dept. of Defence; Titanium and titanium alloys; MIL-HDBK-697A; (1974) G Ltjering, J C Williams; Titanium; 2nd Edition, Springer; (2007) 266 W A Baeslack, J R Davis and C E Cross; Welding, Brazing, and Soldering; ASM handbook, ASM International; 6 (1993) 507-523 Yoshiki Oshida, Bioscience and Bioengineering of Titanium Materials; Elsevier, 1st Edition; (2007) 12 Franois Cardarelli; Materials Handbook: A Concise Desktop Reference; 2nd Edition, Springer; (2008) 305 M J Donachie Jr; Titanium: A Technical Guide; 2nd Edition; ASM International; Materials park, OH 44073-0002, USA; (2000) 68 Vydehi Arun Joshi; Titanium Alloys: An Atlas of Structures and Fracture Features; Taylor and Francis group; (2006) J C M. Li; Microstructure and properties of materials; World scientific publishing co. Pvt. Ltd; 2 (2000) 22 G W Rodney, F Boyer, E W Collings; Materials Properties Handbook: Titanium Alloys; ASM International; Materials park, OH 44073-0002, USA; (1994) 9 G W Rodney, F Boyer, E W Collings; Materials Properties Handbook: Titanium Alloys; ASM International; Materials park, OH 44073-0002, USA; (1994) 125 G Welsch et al; Mett. Transactions A; 8 (1977) 169-177 G W Rodney, F Boyer, E W Collings; Materials Properties Handbook: Titanium Alloys; ASM International; Materials park, OH 44073-0002, USA; (1994) 483-636 W Lepkowski and J Holladay; The physical properties of titanium and titanium alloys; Battelle; (1956) 36
146
[52] [53]
[54]
[55] [56] [57]
[58]
[59]
[60]
[61]
[62]
[63]
[64]
[65] [66]
[67]
References [68] [69] G Ltjering, J C Williams; Titanium; 2nd Edition, Springer; (2007) 15-16 Norman E Dowling; Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue; 4th Edition; Pearson Education Limited; (2012) M J Donachie Jr; Titanium: A Technical Guide; 2nd Edition; ASM International; Materials park, OH 44073-0002, USA; (2000) 14 Scott D Henry and Faith Reidenbach; Fatigue Data Book: Light Structural Alloys; 1st Edition; ASM international; Materials Park; OH 44073-0002; USA; (1995) 270 Valentine N Moiseyev; Titanium alloys- Russian Aircraft and Aerospace Applications; Taylor& Francis group; 5 (2006) 9 Christoph Leyens, Manfred Peters, Titanium and Titanium Alloys: fundamentals and applications; Wiley-VCH; (2007) 6 M J Donachie Jr; Titanium: A Technical Guide; 2nd Edition; ASM International; Materials park, OH 44073-0002, USA; (2000); 55 A D McQuillan, The Application of Hydrogen Equilibrium-Pressure Measurements to the Investigation of Titanium Alloy Systems, J. Inst. Met., 79 (1951) 73-88 C W Dawson, S.L. Sass, Metall. transactions, AIME, USA, 42 (1951) 616 R Kot, G Krause and V Wiess; Transformations and plasticity of titanium, 1952 J L Scott; A Calorimetric investigation of zirconium, titanium and zirconium alloys from 60 to 960 oC Oak Ridge national laboratory; Report ORNL-2328; (1957) 82,86,90, 255 E Rudy and J Progulski; A Pirani furnace for the precision determination of the melting temperatures of refractory metallic substances; Planseeber; Pulvermet; 15 (1967) 13-45 E.W Collings; Anomalous electrical resistivity, bcc phase stability and super conductivity in titanium-vanadium alloys; Phys. Rev. Vol. 9, (1974) 3989-3999 R R Boyer, G Welsch and E.W Collings; Materials properties handbook: Titanium alloys; ASM international; Materials Park; OH 44073-0002; USA; (1994) 128 M J Donachie Jr; Titanium: A Technical Guide; 2nd Edition; ASM International; Materials park, OH 44073-0002, USA; (2000); 55-63 S L Semaiatin, V Seetharaman and I Weiss; Hot working of titanium alloys-An overview, JOM (Journal of metals), (1997) 33-39
[70]
[71]
[72]
[73]
[74]
[75]
[76] [77] [78]
[79]
[80]
[81]
[82]
[83]
147
References [84] C P Sharma; Engineering Materials: Properties and Applications of Metals and Alloys; 2nd Edition; Prentice-Hall of India Pvt. Ltd; New Delhi; (2004) 142 Taylan Altan; Cold and Hot Forgings: Fundamentals and Applications; ASM International; Materials park, OH 44073-0002, USA; (2005) 262 Rodney R Boyer., Titanium and Titanium alloys: Metallographic techniques and microstructures, ASM International Hand book; 9 (2004) 970 George F Vander Voort; Optical microscopy; ASM International Hand book; 9 (2004) 102 George F Vander Voort; Optical microscopy; ASM International Hand book; 9 (2004) 293 Douglaus B Murphy; Michael W Davidson; Fundamentals of Light microscopy and electronic imaging; 2nd Edition; Wiley-Blackwell; (2013) Vitalij K Pecharsky; Peter Y Zavalij; Fundamentals of powder Diffraction and structural characterization of materials; 2nd Edition; Springer; (2009) C Suryanarayana and Grant Norton M; X-ray diffraction: A practical approach; Plenum press; USA; (1998) 125-146 B D Cullity; Elements of X-ray diffraction; Addison-Wesley metallurgy series; USA; (1956) 305-314 Clive Whiston; X-ray methods; Wiley-India Edition; (1996) 81-112 C Suryanarayana and M Grant Norton; X-ray diffraction: A practical approach, Plenum press; USA; (1998) 167-176 C Suryanarayana and M Grant Norton; X-ray diffraction: A practical approach; Plenum press; USA; (1998) 167-176 G Ltjering and J C. Williams; Titanium; 2nd Edition; (2007) 148 S A Souza et al; Materials science and engineering; C; 29 (2009) 1023-1028 J J Rausch, Crossley F A, Kessler H D; Titanium-rich corner of the Ti - Al-V System; Trans. AIME; 206 (1956) 211 -214 [99] S Malinov, P Markovsky, P Sha Wei and Guo Z; Resistivity study and computer modeling of the isothermal transformation kinetics of Ti-6Al-4V and Ti-6Al-2Sn-4Zr2Mo-0.08Sialloys; Journal of alloy compounds; 314 (2001) 181-92 [100] S Malinov et.al; Materials characterization; 48 (2002) 279-295
148
[85]
[86]
[87]
[88]
[89]
[90]
[91]
[92]
[93] [94]
[95]
[96] [97] [98]
References [101] Satyam Suwas, Apu Sarkar, and Shibayan Roy; Materials characterization; Elsevier; 62 (2011) 35-42 [102] A K Swarnakar et.al; Journal of alloys and compounds; 509 (2011) 2723-2728 [103] Bozidar Liscic et.al; Quenching theory and technology; CRC press, Taylor and Francis Group, LLC; 2nd Edition; 2010; 85-103 [104] Antnio Crespo; Modelling of Heat Transfer and Phase Transformations in the Rapid Manufacturing of Titanium Components; Dr. Amimul Ahsan (Ed.); Intech publishers; (2011) 24 [105] V N Eremenko, Yu I Buyanov and S B Prima; Phase diagram of the system titaniumCopper; Institute of Materials Science, Academy of Sciences of the UkrSSR; 6; 42 (1966) 501
149
