Setup items by operation
2.9
Sending scan data by E-mail
% Specify settings for sending scan data by E-mail.
!
Detail
Scan data can be sent to a specified E-mail address as an attached file of the message. If the SMTP server supports SMTP over SSL or STARTTLS, setting is recommended. Because communication can be encrypted by SSL/TLS, the machine can communicate securely with the server. If the SMTP server requires SMTP authentication, the SMTP authentication setting must be specified. If the SMTP server requires POP before SMTP authentication, the POP before SMTP authentication setting must be specified. In addition, if the POP server supports POP over SSL or APOP authentication, settings for these can be specified.
Specify the settings according to the following flowchart.
TCP/IP Settings
E-mail TX (SMTP)
Communicate with the SMTP server using SSL/TLS?
SMTP Authentication?
POP before SMTP?
Yes
No
Yes
No
Yes
No
SMTP over SSL/Start TLS
SMTP Authentication
POP before SMTP
(1) POP over SSL? (2) APOP
Yes
No
(1) POP over SSL (2) APOP Authentication
Finish
bizhub C203/C253/C353
2-29
Setup items by operation
!
Detail
For details on registering E-mail addresses, refer to "Registering or editing an address book destination" on page 2-182. For details on the E-mail-based file transmission, refer to the User manual Network Scan/Fax/Network Fax Operations.
2.9.1
TCP/IP Settings
% Specify settings to use this machine in a TCP/IP network environment.
!
Detail
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 2-3.
2.9.2
E-mail TX (SMTP)
E-mail TX (SMTP)
1 2 3
In Administrator mode of PageScope Web Connection, select the Network tab. Select "E-mail Setting.". Select "E-mail TX (SMTP)".
2-30
bizhub C203/C253/C353
Setup items by operation
2
Definition Select "ON". Select "ON". Specify the SMTP server address. (Format: "***.***.***.***", Range for ***: 0 to 255) If the DNS server is specified, the address can be specified using the host name. This item can also be specified with IPv6. Default setting: 25 Specify the port number. Specify the time period before the server connection times out. Select whether to limit the size of sent messages. To limit the maximum mail size, specify the max. allowance of the mail size including the attached file. Mails exceeding the maximum allowance are removed. If a mail is separated, this setting is disabled. The administrator address specified in "Machine Setting" in the Maintenance tab in Administrator mode of PageScope Web Connection is displayed. To divide the mail size, select "ON". If the mail software used for receiving mails does not have the mail restore function, the mails may not be read. To divide the mail, specify a divided mail size. Restore function of the mail soft Receiving limit of the server Receiving limit of the server Address of the server Prior confirmation
Item E-mail TX Setting Scan to E-mail SMTP Server Address
Port Number Connection Timeout Max Mail Size Server Capacity
Port number for the server
Admin. E-mail Address
Binary Division
Divided Mail Size
bizhub C203/C253/C353
2-31
2
Admin. E-mail Address
Setup items by operation
1 2 3
In Administrator mode of PageScope Web Connection, select the Maintenance tab. Select "Machine Setting". Specify the administrator address.
Item Admin. E-mail Address
Definition Specify the address for the administrator (up to 128 characters). If the administrator address is not set, messages cannot be sent. The set address is displayed on the transmitter section of the message. Before messages are sent, the address can be changed to one other than the administrator address from the control panel.
Prior confirmation Address for the administrator
!
Detail
If "Change the From Address" is set to "Restrict", the From address cannot be changed when sending an E-Mail message. For details, refer to the User manual Network Scan/Fax/Network Fax Operations.
2-32
bizhub C203/C253/C353
Setup items by operation
2.9.3
SMTP over SSL/Start TLS
E-mail TX (SMTP)
1 2 3 4
Item
In Administrator mode of PageScope Web Connection, select the Network tab. Select "E-mail Setting". Select "E-mail TX (SMTP)". Specify the following settings.
Definition To encrypt communication between this machine and the SMTP server using SSL/TTS, select "SMTP over SSL" or "Start TLS". Default setting: 25 If "Start TLS" is selected, specify the port number. Default setting: 465 If "SMTP over SSL" is selected, specify the port number to be used for SSL communication. Prior confirmation Whether the sever supports SSL or STARTTLS Port number for the server Port number for the server
Use SSL/TLS
Port Number Port No. (SSL)
Action for Invalid Certificate
1 2 3 4
In Administrator mode of PageScope Web Connection, select the Security tab. Select "SSL/TLS Setting". Select [Setup]. Select "Set Mode using SSL".
!
Detail
To specify settings for "Action for Invalid Certificate", create a certificate for this machine in advance. For details, refer to "Creating a certificate for this machine for SSL-based communication" on page 2-10.
bizhub C203/C253/C353
2-33
2
Item Action for Invalid Certificate Definition Specify the operation when the validity period for the received certificate has expired. If "Continue" is selected, processing continues even if the date of the certificate is invalid. If "Delete the Job" is selected, the job is deleted if the date of the certificate is invalid.
Setup items by operation
Prior confirmation
2.9.4
SMTP Authentication
1 2 3 4
Item
In Administrator mode of PageScope Web Connection, select the Network tab. Select "E-mail Setting". Select "E-mail TX (SMTP)". Specify the following settings.
Definition To perform SMTP authentication, select the "SMTP Authentication" check box. Specify the user ID for the SMTP authentication (up to 255 characters). Specify the password for the SMTP authentication (up to 128 characters). Specify the domain name for the SMTP authentication (up to 255 characters). If the authentication method is Digest-MD5, the domain name must be specified. Specify whether to synchronize with user authentication. When user authentication is performed, this item is displayed. Authentication method Prior confirmation Whether the sever requests SMTP
SMTP Authentication User ID Password Domain Name
Authentication Settings
Whether to synchronize the user authentication
!
Detail
A SMTP authentication method that is supported by the SMTP server and provided with the strongest encryption strength is automatically selected from Digest-MD5, CRAM-MD5, PLAIN, and LOGIN. If there is just one domain (realm) to which the user belongs, it is notified from the SMTP server at the time of initial communication, and communication is automatically made using the domain name. Therefore, no domain name setting on this machine is not required. If there are two domains or more to which the user belongs, however, specify the domain name to which the user belongs.
2-34
bizhub C203/C253/C353
Setup items by operation
2.9.5
POP before SMTP
POP before SMTP
1 2 3 4
Item
In Administrator mode of PageScope Web Connection, select the Network tab. Select "E-mail Setting". Select "E-mail TX (SMTP)". Specify the following settings.
Definition To perform POP before SMTP, select "ON". Specify the time period to access the SMTP server after logging in to the POP server. Prior confirmation Whether the sever requires POP before SMTP authentication Whether the POP server is different from the SMTP server
POP before SMTP POP before SMTP Time
!
Detail
If the POP server is different from the SMTP server, the POP server informs the SMTP server that it has been logged in. Therefore, if the set POP before SMTP time is too short, messages may not be sent.
E-mail RX (POP)
1 2 3
In Administrator mode of PageScope Web Connection, select the Network tab. Select "E-mail Setting". Select "E-mail RX (POP)".
bizhub C203/C253/C353
2-35
2
Item E-mail RX Setting POP Server Address Definition To perform POP before SMTP, select "ON". Specify the POP server address. (Format: "***.***.***.***", Range for ***: 0 to 255) If the DNS server is specified, the address can be specified using the host name. This item can also be specified with IPv6. Enter the login name for the POP server (up to 63 characters). Specify the password for logging in to the POP server (up to 15 characters). Specify the time period before the server connection times out. Default setting: 110 Specify the port number.
Setup items by operation
Prior confirmation
Address of the server
Login Name Password Connection Timeout Port Number
Port number for the server
2.9.6
POP over SSL
E-mail RX (POP)
1 2 3 4
Item
In Administrator mode of PageScope Web Connection, select the Network tab. Select "E-mail Setting". Select "E-mail RX (POP)". Specify the following settings.
Definition To encrypt communication between this machine and the POPS server using SSL, select the "Use SSL/TLS" check box. Default setting: 995 Specify the port number used in SSL communication. Prior confirmation Whether the sever supports SSL Port number for the server
Use SSL/TLS
Port No. (SSL)
2-36
bizhub C203/C253/C353
Setup items by operation Action for Invalid Certificate
1 2 3 4
In Administrator mode of PageScope Web Connection, select the Security tab. Select "SSL/TLS Setting". Select [Setup]. Select "Set Mode using SSL".
!
Detail
To specify settings for "Action for Invalid Certificate", create a certificate for this machine in advance. For details, refer to "Creating a certificate for this machine for SSL-based communication" on page 2-10.
Item Action for Invalid Certificate
Definition Specify the operation when the validity period for the received certificate has expired. If "Continue" is selected, processing continues even if the date of the certificate is invalid. If "Delete the Job" is selected, the job is deleted if the date of the certificate is invalid.
Prior confirmation
bizhub C203/C253/C353
2-37
2
2.9.7 APOP Authentication
Setup items by operation
1 2 3 4
Item
In Administrator mode of PageScope Web Connection, select the Network tab. Select "E-mail Setting". Select "E-mail RX (POP)". Specify the following settings.
Definition To encrypt the login name and password when logging in to the POP server, select "ON". Prior confirmation Whether the sever requests APOP
APOP Authentication
!
Detail
When the POP server is logged in with APOP, the password is encrypted with Digest-MD5. If "ON" is specified for APOP authentication, you cannot log in to the server if the POP server does not support APOP.
2-38
bizhub C203/C253/C353
