1 DESCRIPTION BILL NO.
1:GENERAL ITEMS Allow for inspection of the required truss samples as per specifications, Bills of Quantities and Drawings. Prepare and submit Workshop/ fabrication Drawings for approvals as follows:B Draft soft copy in Autocad 2010 in CD-RW. (Note: Full set of drawings to be presented as per drawing list). 1 ITEM QTY UNIT RATE AMOUNT
1 ITEM
20,000.00
20,000.00
20,000.00
20,000.00
CARRIED TO GRAND SUMMARY
40,000.00
GENERAL
Page 1
DESCRIPTION BILL 2.0 ROOFING Roof construction
QTY
UNIT
RATE
AMOUNT
All timber shall be smooth to uniform thickness, and painted with sadolin pinotex decorative paint Sawn celcured second grade cypress A 50 x 50mm bearers bolted to mild / nailed steel plate at 900mm centres 140 LM 150.00 21,000.00
B Drill 12mm diameter hole through 50mm thick timber C 12mm diameter mild steel bolt 100mm long complete with head, nut and washers FRAMED STRUCTURAL STEEL WORKS Mild steel square hollow sections cut as required and fillet welded together and primed with red lead oxide primer after fabrication pitched trusses The following in various clear spans and heights including welding, bolting, riveting, connection plates and hoisting approximately 10000 mm above ground D 60 x 40 x 4 mm thick main tie and rafters E 40 x 40 x 4 mm thick struts or ties 10 thick x 180mm width x 200mm long gusset plates four times holed
48 No.
100.00
4,800.00
48 No.
100.00
4,800.00
1,070 Kg 745 Kg
230.00 230.00
246,100.00 171,350.00
108 No.
230.00
24,840.00
Bracings G 50 x 50 x 6 mm thick angle bracings Sagrods H 12 mmx 1.4 m long diameter sagrods threaded both ends complete with nuts and washers Carried to collection 94 No. 350.00 32,900.00 710,490.00 890 Kg 230.00 204,700.00
ROOF
Page 2
DESCRIPTION Lantern Mild steel square hollow sections cut as required and fillet welded together and primed with red lead oxide primer after fabrication A. 50 x 50 x 6 mm angle framework Prepare and apply one undercoat and two finishing coats of gloss oil paint to: B Surfaces of metal exceeding 100mm but not exceeding 200mm girth Roof covering
QTY
UNIT
RATE
AMOUNT
113
Kg
230.00
25,990.00
113 LM
230.00
25,990.00
8 mm thick polycarbonate laid on z purlins at 1350 mm centres complete with and including silicon gel, clips and brackets (m/s)
Transulent covering to pitched roof Approved hip cap fixed to match 1.2mm thick , 100mm wide aluminium cap twice bent and ends screwed to frame including silicon gel Wrot prime grade cypress
435
SM
2,850.00
1,239,750.00
400 LM
600.00
240,000.00
E F
250 x 25mm curved fascia with one labour 100 x 25mm T & G eaves boarding fixed to bearers (m/s) at 600mm centres
70 LM 40 SM
200.00 800.00
14,000.00 32,000.00
25 x 25 x 3 mm thick glass bearers
1,550 Kg
230.00
356,500.00
Carried to collection
1,934,230.00
Rain water goods
ROOF
Page 3
DESCRIPTION Pvc gutter system comprising gutter, connectors, fastening brackets, cap ends, universal angles, pipe bends, central outlets, stop ends pipe clips etc 170 mm U-shaped gutter fixed to fascia board with and including approved brackets Extra over ditto for bend
QTY
UNIT
RATE
AMOUNT
A.
70 LM
450.00
31,500.00
B. C.
12 No. 12 No.
200.00 250.00
2,400.00 3,000.00
Extra over ditto for 300 x 300 x 300 fulbora out let
Approved Upvc heavy duty plastic pipes D E F 100 mm diameter down pipe fixed to wall with and including approved holderbats Extra over down pipe for swanneck Ditto for shoe 96 LM 12 No. 12 No. 600.00 250.00 250.00 57,600.00 3,000.00 3,000.00
Prepared and apply one undercoat and two finishing coats of sadolin pinotex paint on G General surfaces of wood 15 SM 500.00 7,500.00
Carried to collection
108,000.00
ROOF
Page 4
DESCRIPTION
QTY
UNIT
RATE
AMOUNT
COLLECTION
Brought forward from page RF/1
710,490.00
Brought forward from page RF/2
1,934,230.00
Brought forward from page RF/3
108,000.00
ROOFING TOTAL CARRIED TO GRAND SUMMARY
2,752,720.00
ROOF
Page 5
