Papers Publications 1. M. G. Gee, R. H. Gee and I.
McNaught Stepwise erosion as a method for determining the mechanisms of wear in gas borne particulate erosion, Wear, 255(2003) 44-54. 2. A J Gant, M G Gee, and A T May, The evaluation of tribo-corrosion synergy for WCCo hardmetals in low stress abrasion, Wear, 256(2004)500-516. 3. A J Gant, M G Gee and A T May, Microabrasion of WC-Co Hardmetals in Corrosive Media, Wear, 256(2004)954-962. 4. M G Gee, C Phatak and R Darling, Determination of Wear Mechanisms by Stepwise Erosion and Stereological Analysis, Wear, 258(2004)412-425 5. A J Gant, M G Gee and B Roebuck, Rotating Wheel Abrasion of WC/Co Hardmetals, Wear, 258(2004)178-188 6. M G Gee, P Tomlins, A Calver, R H Darling and M Rides, A New Friction Measurement System For The Frictional Component of Touch, Wear, 259(2005)1437-1442 7. M G Gee , A J Gant, I M Hutchings, Y Kusano, K Schiffman, K Van Acker, S Poulat, Y Gachon, J von Stebut, P Hatto, G Plint, Results From An Interlaboratory Exercise To Validate The Micro-Scale Abrasion Test, Wear, 259(2005)27-35 8. M G Gee, The Use of PC Scanners In Micro-Abrasion Wear Testing, Wear, 259(2005)1448-1452 9. M G Gee, B Roebuck and A Gant, Abrasive Wear Testing with the ASTM B611 and Modified ASTM G65 Rotating Wheel Test Systems, Plansee Seminar, Reutte, June 2005 10. A.J. Gant and M.G. Gee, Abrasion Of Tungsten Carbide Hardmetals Using Hard Counterfaces, International Journal of Refrac and Hard Materials, 24(2006)189-198. 11. M G Gee, A Gant and B Roebuck, Wear Mechanisms in Abrasion of WC/Co and Related Hardmetals, EuroPM2006 Hard Materials and Diamond Tools, Ghent, Belgium, October 2006, 189-194. 12. B Roebuck, A Gant and M G Gee, Abrasion and Toughness Property Maps for WC/Co Hardmetals, EUROPM2006 Hard Materials and Diamond Tools, Ghent, Belgium, October 2006, 201-206. 13. N M Jennett and M G Gee, Mechanical Testing of Coatings, Chapter in Surface Coatings for Protection Against Wear, Woodhead Publishing in materials, ed B G Mellor, 2006 14. I M Hutchings, M G Gee and E Santner, Friction and Wear, Chapter in Springer Handbook of Materials Measurement Methods, eds Czichos, Saito and Smith, 2006 15. M G Gee and A D Gee, A cost effective micro-tribology test system, to be published in Wear, 2007
Good Practice Guides GOOD PRACTICE GUIDES 1. E Bennett, M Gee, L Lay, R Morrell and B Roebuck, Tests for Advanced Technical Ceramic Materials Performance, NPL Measurement Good Practice Guide no 19, August 1999. B Roebuck, M Gee, E G Bennett and R Morrell, Mechanical Tests for Hardmetals, NPL Measurement Good Practice Guide no 20, March 2000. M Stewart, M Cain and M Gee, Piezoelectric Displacement in Ceramics, NPL Measurement Good Practice Guide no 23, May 1999. F Lowrie, M Stewart, M Cain, M Gee, Piezoelectric Finite Element Analysis, NPL Measurement Good Practice Guide no 24, May 1999. M G Gee and M J Neale, General Approach and Procedures for Unlubricated Sliding Wear Tests, NPL Good Practice Guide no 51, January 2002 M G Gee, A Gant and I M Hutchings, Rotating Wheel Abrasive Wear Testing, NPL Good Practice Guide no 55, March 2002. M G Gee and I M Hutchings, General Approach and Procedures for Erosive Wear Testing, NPL Good Practice Guide no 56, 2002. M G Gee, A Gant, I Hutchings, R Bethke, K Schiffmann, K Van Acker, S Poulat, Y Gachon and J von Stebut, Ball Cratering or Micro-Abrasion Wear Testing of Coatings, NPL Good Practice Guide no 57, 2002.
2. 3. 4. 5. 6. 7. 8.
Good Practice Guides REPORTS 1. 2. M G Gee and A D Gee, A New Micro-Tribology Test System, NPL REPORT DEPC-MPE 040, MARCH 2007 L A Chapman and M G Gee, Crossed Rod High Stress Wear Testing, NPL Measurement Note, DEPC (MN) 044, February 2007
