RPM/Belgium N.V.
Alteco Technik GmbH
An Company
ALUMANATION
301
The best way to protect
your metal structures!
Alumanation
301
The heavy duty Protective Coating for metal
Alumanation
301 is a heavy duty coating
for the corrosion protection and water-
proofing of metal structures such as roofs,
side walls, storage tanks, bridges,
structural steel, piping, cranes, electrical
transmission towers, etc.
Alumanation
301 is a solvent based
premium grade industrial maintenance
coating. It is formulated from specially
processed asphaltic liquids, non-drying
oils, a proprietary blend of natural and
synthetic fibres and premium leafing grade
aluminium.
Advantages
High solid coating applied at a rate of 0.8 litres/m
2
in
one coat to a dry film thickness of 350 microns.
Surface preparation by high pressure power wash or
power brushing. No sandblasting needed.
Outstanding ability to adhere to unprimed metal
surfaces.
Aluminium pigment in Alumanation
301 acts as a
UV-heat reflector and insulator.
Reduces the interiour temperature in metal clad
buildings dramatically in hot sunny climates.
The coating remains intact and homogeneous with
no cracking even in climates where the daily and
annual variations in ambient temperature are very
large.
Only one layer of the coating provides
waterproofing, anticorrosion and crack bridging
performance.
Alumanation
301 has a complete range of
compatible accessories. These accessories extend
the range of industrial maintenance.
Can be applied by heavy duty airless spray
equipment or brush.
Good chemical resistance to both acids and alkalis.
45 minutes after application, Alumanation
301 can
withstand rain conditions.
Alumanation
301 has been used worldwide in all kinds of
environmental and climatic conditions to protect metal from
corrosion and water infiltration!
Alumanation
301 has series
of independent approvals
and certificates from various
authorities across the world
stretching back more than 20
years.
These approvals and certificates have given the
product credibility for insurance backed guarantees
that are available with Alumanation
301. Some of
these approvals include:
Bureau VERITAS approval
Test Certificate from Staatliches Material-
prfungsamt Nordrhein - Westfalen, Germany
Test Certificate from EMPA, Switzerland
Passing, ASTM B117, 1000 hours salt spray testing
Authorised applicator:
R
P
M
/
B
e
l
g
i
u
m
N
.
V
.
-
0
8
/
2
0
0
7
-
D
o
c
.
5
1
0
/
G
B
RPM/Belgium N.V.
Industriepark Noord H. Dunantstraat 11B B-8700 Tielt
Tel.: + 32 (0) 51 / 40 38 01 Fax: + 32 (0) 51 / 40 55 90
E-mail: rpm@rpm-belgium.be http://www.rpm-belgium.be
Alteco Technik GmbH
Raiffeisenstrae 16 D-27239 Twistringen
Tel.: + 49 (0) 42 43 / 92 95 0 Fax: + 49 (0) 42 43 / 33 22
E-mail: info@alteco-technik.de http://www.alteco-technik.de
Thisbrochureisnot intended toestablish product recommendationsfor anyinstallation. Tothebest of
our knowledgetheinformation contained herein istrueand accurateat thetimeof issue, but issubject
tochangewithout prior notice. Nopart of thisbrochuremaybecopied without written authorisation of
RPM/ BelgiumN.V. - RPM/ BelgiumN.V.
Warranty
RPM/Belgium N.V. and Alteco Technik GmbH warrant all goods to be free from
defects and will replace materials proven to be defective. The given information
corresponds to our present standard of knowledge. However, it is the buyers
responsibility to determine the suitability of the products in individual cases by
conducting own tests.
RPM/ BelgiumN.V. and Alteco Technik GmbH aresubsidiaries of
RPM Inc., USA, a public owned American companyand areleading
manufacturers of industrial flooring systems, coatings, sealants and
membranes. RPM/ BelgiumN.V. and Alteco Technik GmbH arecerti-
fied byLloyds to theISO 9001 qualitystandard.
ALUMANATION
301
Physical Properties Value Test Method
Specific gravity: 1.06 0.2 ASTM D-1475
Solids by weight: 61% 1% ASTM D-1353
Solids by volume: 47% 1% ASTM D-1475
Colour: aluminium
Drying time: 24 hours ASTM D-1640
Min. coverage metal: 0.8 l/m
2
Dry film thickness with 0,8 l/m
2
: min. 350 microns
Artificial weathering - Xenontest 2000 hours: no evident change DIN 53 357
Adhesion test after 1000 hours saline immersion: 0.12 N/mm
2
DIN ISO 4624
Products in the ALUM ANATI O N
301 System
Technical Details
VULKEM
116
A highly elastic one component polyurethane mastic to
be used to ensure waterproofing at expansion joints,
connections to drains, walls, ventilation pipes, etc.
ALUMAFLASH
AND POLYFLASH
Two highly elastic self adhesive and waterproofing
butyl tapes that are used with Alumanation
301 to
repair and waterproof overlaps, joints, rustholes,
gutters, connections, etc...
Alumaflash
has an aluminium foil surface (for repairs
after application) and Polyflash
has a geo-textile finish
(can be coated with Alumanation
301).
For additional technical data, see the Alumanation
301 data sheet.
