SET UP A 150-TPH CRUSHER PLANT
SECTION I. ADMINISTRATIVE DATA
All Courses Including this Lesson COURSE NUMBER(S) 713-62G10 COURSE TITLE(S) Quarry Specialist Course
Task(s) Taught or Supported
TASK NUMBER (S) 051-251-XXXX
TASK TITLE (S) Set Up a 150-TPH Crusher Plant
Reinforced Task(s)
TASK NUMBER (S) None
TASK TITLE (S)
Academic Hours
The academic hours required to teach this lesson are as follows: Peacetime Hrs Meth 2.0 CO 3.0 DM 6.0 PE1 2.0 PE2 6.0 TE1 2.0 TE2 Mobilization Hrs Meth 2.0 CO 3.0 DM 6.0 PE1 2.0 PE2 6.0 TE1 2.0 TE2 IDT Hrs Meth 00.0 00.0 00.0 00.0 00.0 00.0 Hrs 2.0 3.0 6.0 2.0 6.0 2.0 ADT Meth CO DM PE1 PE2 TE1 TE2 Hrs 00.0 00.0 00.0 00.0 00.0 00.0 DL Meth
Test
Total Hours
21.0
21.0
00.0
21.0
00.0
Test Lesson Number
Refer to Appendix C, Test and Test Solutions
09/25/98 62G1@BCL@24010A59
C-I-1
SET UP A 150-TPH CRUSHER PLANT
Prerequisite Lesson(s)
LESSON NUMBER(S) 051-62G1-B01 051-62G1-B02 051-62G1-B03 051-62G1-B04 051-62G1-C01
LESSON TITLE(S) Introduction to Course Introduction to Safety Introduction to Environmental Stewardship Utilize The Army Maintenance Management System (TAMMS) Introduction to Rock Crushing Operations
Clearance and Access
Unclassified
References Required
Number
*TM 5-332 TM 5-3820-255-12&P TM 5-3820-256-14&P TM 5-3820-257-14&P TM 5-3820-258-14&P TM 5-3820-259-14&P TM 5-3820-260-14&P TM 5-3820-262-14&P TM 5-3820-263-14&P Pits and Quarries
Title
Operation, Model M150 Primary Crusher Unit, Model M3042 Portable Surge Bin Feeder, Model PSF-12 Secondary Crusher and Screening Unit, Model M1313 Tertiary Crusher Unit, Model MC45 Washing and Screening Unit, Model M1122 Product Conveyor, Model PC1245 Water Pump Unit, Model GB2060
Date
Dec 67 Jun 97 Jun 97 Jun 97 Jun 97 Jun 97 Jun 97 Jun 97 Jun 97
Additional Information
Instructor Requirements
Two ITC certified instructors
Additional Support Personnel Requirements
Assign alternate instructors as needed.
09/25/98 62G1@BCL@24010A59
C-I-2
SET UP A 150-TPH CRUSHER PLANT
* This reference is currently being revised as a Field Manual. Equipment Required 150-TPH crusher plant General mechanics tool kit drive set with sockets 18 pipe wrench 24 adjustable wrench 12 ruler Replacement screens Cone and jaw adjustment pump Grease gun
Materials Required
Instructor Materials TM 5-3820-255-12&P TM 5-3820-256-14&P TM 5-3820-257-14&P TM 5-3820-258-14&P TM 5-3820-259-14&P TM 5-3820-260-14&P TM 5-3820-262-14&P TM 5-3820-263-14&P Job specifications C02 TSP Equipment records folder Coveralls Safety boots Goggles Gloves Double hearing protection Hard hat
Student Materials TM 5-3820-255-12&P TM 5-3820-256-14&P TM 5-3820-257-14&P TM 5-3820-258-14&P TM 5-3820-259-14&P TM 5-3820-260-14&P TM 5-3820-262-14&P TM 5-3820-263-14&P Job specifications Equipment records folder Student guides Coveralls Safety boots Goggles Gloves Double hearing protection Hard hats Pencils Paper
Classroom, Training Area, and Range Requirements
NOTE: Refer to the Facilities Summary of the POI.
Ammunition Requirements
None
09/25/98 62G1@BCL@24010A59
C-I-3
SET UP A 150-TPH CRUSHER PLANT
Instructional Guidance
Before presenting this lesson, a. Ensure classroom is available and ready for training b. Ensure overhead projector, screen, and VGTs are on hand c. Ensure all materials are on hand and in quantities needed. d. Read and understand C02 TSP prior to conducting training. e. Ensure equipment is available and on site.
Proponent Lesson Plan Approvals
Name
Rank
Position
Date
09/25/98 62G1@BCL@24010A59
C-I-4
