Job: ARDEN PROPERTIES 8TH STREET PARKING LOT Type: A, B, C AND D Notes:

Avalume
Page 1 of 3
The Avalume is a rectilinear area luminaire defined by its sleek rounded profile and rugged construction. The housing is one-piece, die cast aluminum and mounts directly to a pole or wall without need of a separate support arm. The optical systems provide IES Types III, IV and V distributions. Vertical lamp luminaires feature vertical lamp position for minimized direct downlight and maximum performance The door frame is single-piece die cast aluminum and retains an optically clear tempered flat glass lens. The luminaire is completely sealed and gasketed preventing intrusion from moisture, dust and insects. Avalume luminaires are finished with a fade and abrasion resistant TGIC powdercoat. Flat glass lens luminaires provide full cutoff performance.

Horizontal and Vertical Lamp

VERTICAL LAMP (AVV)

HORIZONTAL LAMP (AVA)

PREFIX

MOUNTING

DISTRIBUTION

WATTAGE

VOLTAGE

FINISH

OPTIONS

AVA

240

BRP

HS
PC

Enter the order code into the appropriate box above. Note: Philips Stonco reserves the right to refuse a configuration. Not all combinations and configurations are valid. Refer to notes below for exclusions and limitations. For questions or concerns, please consult the factory.

PREFIX
AVA AVV Avalume Horizontal Lamp Luminaire Avalume Vertical Lamp Luminaire

MOUNTING
1 2 2@90 3 3@120 4 W WS Single Pole Mount Twin Pole Mount at 180 Twin Pole Mount at 90 3-way Pole Mount at 90 3-way Pole Mount at 120 4-way Pole Mount Wall Mount Wall Mount with Surface Conduit

distribution
Horizontal Lamp Luminaires (AVA) Only 3 F 5 MTS IESType III IES Type IV Forward Throw Type V Medium Throw with SoliteTM Lens (Fluorescent only.)

Type 3 reflectors ship as Type F. Removal of an insert converts the reflector to Type 3.

TYPE 'A' : AVA-1-3-150PSMH-240-BRP-HS-LF-PC TYPE 'B' : AVA-1-F-250PSMH-240-BRP-HS-LF-PC TYPE 'C' : AVA-1-F-150PSMH-240-BRP-HS-LF-PC TYPE 'D' : AVA-1-5-150PSMH-240-BRP-HS-LF-PC
Wattage
Pulse Start MH Magnetic Ballast Standard MH Magnetic Ballast High Pressure Sodium Magnetic Ballast Compact Fluorescent
100MH1 150MH1
175PSMH

Vertical Lamp Luminaires (AVV) Only 3V FV 5V IESType III IES Type IV Forward Throw IESType V

Type 3V reflectors ship as Type FV. Removal of an insert converts the reflector to Type 3V. Type 3V/FV optics are rotatable in 90 increments.

voltage
250PSMH 250PS90**

320PSMH 250MH* 250HPS

E E E

350PSMH1 E 400PSMH1 E

175MH* 150HPS (3)42TRF2,3,4

400MH1,* 400HPS

120 208 240 277 347 480

UNIV (AVA only, Fluorescent only.)

Accepts 120V through 277V, 50hz to 60hz input.

* 175MH, 250MH and 400MH not available for sale in the United States. ** 250 watt Pulse Start Metal Halide with a 90% efficient magnetic ballast. Complies with California Title 20 effective 1/1/2010. Available in 120, 208, 240 or 277V only.

Wattages marked with Circle E meet federal energy efficiency standards applicable to 150 watt through 500 watt metal halide luminaires only.

1. Re quires mogul base lamps. 2. Fluorescent luminaires feature electronic ballasts that accept 120V through 277V, 50hz to 60hz, input. Specify UNIV voltage for 120V through 277V. 3. Fluorescent available in AVA luminaires only, MTS optics only. 4. Fluorescent luminaires not available in 347V or 480V.

2013 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires 79115-43/0413

Avalume
Page 2 of 3
FINISH
BRP Bronze Paint BLP Black Paint NP Natural Aluminum Paint WP WhitePaint OC Optional Color Paint
Specify Optional Color or RAL ex: OC-LGP or OC-RAL7024.

Horizontal and Vertical Lamp

OPTIONS
HS6 LF7 PC8
5

SC

Special Paint
Specify. Must supply color chip.

External House Side Shield -BRONZE In-Pole/In-Line Fusing Photocontrol Receptacle with Photocontrol PCR Photocontrol Receptacle MF9 Mast Arm Fitter PTF2 Pole Top Fitter 2.375" X 4" PTF3 Pole Top Fitter 3" - 3.5" X 6" PTF4 Pole Top Fitter 3.5" - 4" X 6" QS10 Quartz Standby QST10 Quartz Standby - Timed Delay Q92410 Quartz Emergency QT92410 Quartz Emergency - Timed Delay WG Wire Guard POLY11 External Polycarbonate Shield TB Terminal Block

5. Luminaires shipped complete from stock require field installation of all options. 6. Supplied standard in black only. 7. Kit includes In-Line Fuses. 8. Not available with 480V. 9. Requires 2 3/8" O.D. Mast Arm. 10. See QS/Q924 Table. 11. 250 watt maximum.
(Note 10)

QS / Q924 Table HID Lamp Watts Maximum Quartz Lamp Watts 175 watts or less 100 Watts Above 175 watts up to 400 watts 150 Watts

QS, QST, Q924 and QT924 options not available with 480V.

DIMENSIONS AND EPA

AVALUME HORIZONTAL (AVA)

5.38" 13.70 cm

6.83" 17.40 cm AVALUME VERTICAL (AVV)

16.50" 41.90 cm

16.00" 40.60 cm

5.12"
13.01 cm

10.50"
26.67 cm

6.60"
16.77 cm

16.50"
41.91 cm

16.25"
41.28 cm

Avalume Horizontal (AVA) Flat Lens With External House Side Shield

Effective Projected Area (EPA) Single

1.1 ft
2

Twin
2.2 ft
2

3/4
2.7 ft
2

Approximate Weight / Single

Avalume Vertical (AVV) Flat Lens

Effective Projected Area (EPA) Single

1.3 ft
2

Twin
2.6 ft
2

3/4
3.23 ft2 .31 m2 4.36 ft2 .41 m2

Approximate Weight / Single

.10 m

.20 m

.25 m

35 lbs 15.9 kg

.13 m

.25 m

1.2 ft2 .11 m2

2.2 ft2 .20 m2

3.2 ft2 .30 m2

With External House Side Shield

46 lbs 20.9 kg

1.54 ft2 .15 m2

2.82 ft2 .27 m2

2013 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires 79115-43/0413

Avalume
Page 3 of 3
SPECIFICATIONS
GENERAL SPECIFICATIONS: Each Avalume luminaire is a rectilinear area luminaire defined by its sleek rounded profile and rugged construction. HOUSING: The housing is one-piece diecast aluminum, and mounts directly to a pole or wall without the need of a separate support arm. The low profile rounded form reduces the Avalume Horizontal Lamp E.P.A. (Effective Projected Area) of the luminaire to only 1.1 square feet (0.10 square meters), and the Avalume Vertical Lamp EPA to only 1.3 square feet (0.13 square meters) DOOR/LENS ASSEMBLY: The door frame is single-piece diecast aluminum and retains an optically clear tempered flat glass lens. The diecast aluminum lens frame hinges down from the housing and is secured by a stainless steel lanyard and hinge pin. The tempered flat glass lens is mechanically secured with four (4) retainers. The electrical and optical chambers are thoroughly sealed with an extruded one-piece memory retentive extruded silicone gasket to prevent intrusion from moisture, dust, insects and other contaminants. OPTICAL SYSTEMS: Avalume Horizontal Lamp luminaires feature segmented reflector systems consisting of two tiers of highly specular aluminum facets, precisely aligned to achieve specific photometric distributions. Optical systems are of the fixed position type with the lampholder positioned on the arm-side of the luminaire. Avalume Horizontal Lamp fluorescent luminaires use a Medium Throw reflector with a Solite glass lens (MTS). Avalume Vertical Lamp luminaires feature spun specular Alzak and segmented reflector system consisting of highly specular aluminum facets, precisely aligned to achieve specific photometric distributions. The Type 3V/FV optical system is rotatable in 90 increments. The position-oriented mogul base lampholder in all luminaires is glazed porcelain with a nickel plated screw shell. ELECTRICAL: All electrical components are UL recognized and factory tested. Electronic and magnetic HID ballasts are high power factor. Magnetic HID ballasts are the separate component type. Electronic and magnetic HID ballasts are capable of providing reliable lamp starting down to -20F / -29C. Standard fluorescent ballasts are solid state. FINISH: Each standard color luminaire receives a fade and abrasion resistant electrostatically applied thermally cured triglycidal isocynurate (TGIC) textured polyester powdercoat finish. Standard colors include Bronze (BRP), Black (BLP), White (WP), Natural Aluminum (NP). Consult factory for specifications on custom colors. LABELS: All luminaires bear U.L. or C.U.L. (where applicable) Wet Location labels. WARRANTY: Avalume luminaires feature a 1 year limited warranty. See Warranty Information for complete details and exclusions.

Horizontal and Vertical Lamp

FULL Cutoff performance: Full cutoff performance means a luminaire distribution where zero candela intensity occurs at an angle at or above 90 above nadir . Additionally, the candela per 1000 lamp lumens does not numerically exceed 100 (10 percent) at a vertical angle of 80 above nadir. This applies to all lateral angles around the luminaire. Cutoff performance: Cutoff performance means a luminaire distribution where the candela per 1000 lamp lumens does not numerically exceed 25 (2.5 percent) at an angle at or above 90 above nadir, and 100 (10 percent) at a vertical angle of 80 above nadir. This applies to all lateral angles around the luminaire.

2013 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires 79115-43/0413

Philips Lighting Company 200 Franklin Square Drive Somerset, NJ 08873 Phone: 855-486-2216

Philips Lighting Company 281 Hillmount Road Markham ON, Canada L6C 2S3 Phone: 800-668-9008