Scribd
Upload
1K views4 pages

Setting FiberHome ,,contoj

The document contains configuration summaries for 3 network devices: 1) FHN-Gedeg#1 with IP 30.30.9.3, running time of 3 hours 23 minutes, VLAN and port configurations. 2) FHN-Gedeg#2 with IP 30.30.9.8, running time of 3 hours 18 minutes, similar VLAN and port configurations to the first device. 3) FHN-DwrBlandong with IP 30.30.9.9, running time of 3 hours 19 minutes, VLAN and port configurations similar to the other two devices.

Uploaded by

salman3401
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
1K views4 pages

Setting FiberHome ,,contoj

The document contains configuration summaries for 3 network devices: 1) FHN-Gedeg#1 with IP 30.30.9.3, running time of 3 hours 23 minutes, VLAN and port configurations. 2) FHN-Gedeg#2 with IP 30.30.9.8, running time of 3 hours 18 minutes, similar VLAN and port configurations to the first device. 3) FHN-DwrBlandong with IP 30.30.9.9, running time of 3 hours 19 minutes, VLAN and port configurations similar to the other two devices.

Uploaded by

salman3401
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

[FHN-Gedeg#1]disp c <--System current configuration <--Running Time : 3 hours,23 minutes,39 seconds sysname FHN-Gedeg#1 password root <--Network Configuration

ip-address 30.30.9.3 255.255.255.0 gateway 30.30.9.254 <--SNMP Community Configuration snmp-agent community 1 read public snmp-agent community 2 write private <--SNMP Trap Configuration <--Global Configuration e1 work-mode gfp-1e1 vlan enable qinq disable admin vlan 209 eth isolation enable e1 clock-source line gfp tx-scram payload gfp rx-scram payload gfp lcas enable gfp fcs disable gfp ext-header null-header <--VLAN Configuration vlan 1 vlan-id 102 member 1-5 .... vlan id FH, tdk bisa diganti vlan 2 vlan-id 209 member 1-5 .... vlan management,bisa diganti vlan 3 vlan-id 107 member 1-5 .... vlan kecamatan 1, bisa diganti <--E1 Configuration e1 port-mode vlan-trunk ............diarahkan ke rici 16 e1 vlan-pvid 102 e1 loop-detect 1 enable ............e1 A diaktivkan e1 loop-detect 2 enable ............ e1 B diaktivkan <--Ethernet Configuration eth 1 admin up eth 1 duplex auto eth 1 port-mode vlan-access eth 1 rate-limit egress 0 eth 1 rate-limit ingress 0 eth 1 vlan-pvid 102 eth 2 admin up eth 2 duplex auto eth 2 port-mode vlan-trunk eth 2 rate-limit egress 0 eth 2 rate-limit ingress 0 eth 2 vlan-pvid 102 eth 3 admin up eth 3 duplex auto eth 3 port-mode vlan-access eth 3 rate-limit egress 0 eth 3 rate-limit ingress 0 eth 3 vlan-pvid 102 eth 4 admin up eth 4 duplex auto eth 4 port-mode vlan-access eth 4 rate-limit egress 0 eth 4 rate-limit ingress 0 eth 4 vlan-pvid 102 ----------------------------------------------------

[FHN-Gedeg#2-config]disp c <--System current configuration <--Running Time : 3 hours,18 minutes,5 seconds sysname FHN-Gedeg#2 password root <--Network Configuration ip-address 30.30.9.8 255.255.255.0 gateway 192.168.0.1 <--SNMP Community Configuration snmp-agent community 1 read public snmp-agent community 2 write private <--SNMP Trap Configuration <--Global Configuration e1 work-mode gfp-1e1 vlan enable qinq disable admin vlan 209 eth isolation enable e1 clock-source line gfp tx-scram payload gfp rx-scram payload gfp lcas enable gfp fcs disable gfp ext-header null-header <--VLAN Configuration vlan 1 vlan-id 102 member 1-5 vlan 2 vlan-id 209 member 1-5 vlan 3 vlan-id 107 member 1-5 <--E1 Configuration e1 port-mode vlan-trunk e1 vlan-pvid 102 e1 loop-detect 1 enable e1 loop-detect 2 enable <--Ethernet Configuration eth 1 admin up eth 1 duplex auto eth 1 port-mode vlan-trunk eth 1 rate-limit egress 0 eth 1 rate-limit ingress 0 eth 1 vlan-pvid 102 eth 2 admin up eth 2 duplex auto eth 2 port-mode vlan-access eth 2 rate-limit egress 0 eth 2 rate-limit ingress 0 eth 2 vlan-pvid 102 eth 3 admin up eth 3 duplex auto eth 3 port-mode vlan-access eth 3 rate-limit egress 0 eth 3 rate-limit ingress 0 eth 3 vlan-pvid 102 eth 4 admin up eth 4 duplex auto eth 4 port-mode vlan-access eth 4 rate-limit egress 0 eth 4 rate-limit ingress 0 eth 4 vlan-pvid 102

-----------------------------------------------[FHN-DwrBlandong-config]disp c <--System current configuration <--Running Time : 3 hours,19 minutes,25 seconds sysname FHN-DwrBlandong password root <--Network Configuration ip-address 30.30.9.9 255.255.255.0 gateway 30.30.9.254 <--SNMP Community Configuration snmp-agent community 1 read public snmp-agent community 2 write private <--SNMP Trap Configuration <--Global Configuration e1 work-mode gfp-1e1 vlan enable qinq disable admin vlan 209 eth isolation enable e1 clock-source line gfp tx-scram payload gfp rx-scram payload gfp lcas enable gfp fcs disable gfp ext-header null-header <--VLAN Configuration vlan 1 vlan-id 102 member 1-5 vlan 2 vlan-id 209 member 1-5 vlan 3 vlan-id 107 member 1-5 <--E1 Configuration e1 port-mode vlan-trunk e1 vlan-pvid 102 e1 loop-detect 1 enable e1 loop-detect 2 enable <--Ethernet Configuration eth 1 admin up eth 1 duplex auto eth 1 port-mode vlan-access eth 1 rate-limit egress 0 eth 1 rate-limit ingress 0 eth 1 vlan-pvid 102 eth 2 admin up eth 2 duplex auto eth 2 port-mode vlan-access eth 2 rate-limit egress 0 eth 2 rate-limit ingress 0 eth 2 vlan-pvid 102 eth 3 admin up eth 3 duplex auto eth 3 port-mode vlan-access eth 3 rate-limit egress 0 eth 3 rate-limit ingress 0 eth 3 vlan-pvid 102 eth 4 admin up eth 4 duplex auto eth 4 port-mode vlan-access eth 4 rate-limit egress 0 eth 4 rate-limit ingress 0

eth 4 vlan-pvid 102

You might also like