TR
ROUGH TERRAIN CRANE
TR-500M
JAPANESE SPECIFICATIONS
OUTLINE
SPEC. NO.
6-section Boom,
2-staged Power Tilt Jib
X-type Outrigger
TR-500M-3-00101
Control No. JA-03
- 35 -
Return Return
to index
to
INDEX
TR-500M-3-00101
TR-500M
CRANE SPECIFICATIONS
CRANE CAPACITY
9.7m Boom
16.0m Boom
22.3m Boom
28.6m Boom
34.9m Boom
38.05m Boom
41.2m Boom
7.8m Jib
12.5m Jib
Single top
50,000kg
30,000kg
20,000kg
12,000kg
11,000kg
8,500kg
7,000kg
3,500kg
2,500kg
4,000kg
SINGLE TOP
at
at
at
at
at
at
at
at
at
3.0m
4.5m
5.0m
8.0m
7.0m
9.0m
10.0m
76
76
(12part-line)
( 8part-line)
( 5part-line)
( 4part-line)
( 4part-line)
( 4part-line)
( 4part-line)
( 1part-line)
( 1part-line)
( 1part-line)
Single sheave. Mounted on main boom head for single
line work.
HOIST
Driven by hydraulic motor and via bevel gear reducer.
With free-fall device.
Automatic brake (with foot brake for free-fall device)
2 single winches
With flow regulator valve with pressure compensation
BOOM ELEVATION
2 double-acting hydraulic cylinders
With flow regulator valve with pressure compensation
MAX.LIFTING HEIGHT
Boom
Jib
41.6m
54.6m
SWING
BOOM LENGTH
Hydraulic motor driven planetary gear reducer
Swing bearing
High/Low speed selection
Swing free/lock changeover type
Negative brake
9.7m - 41.2m
OUTRIGGERS
BOOM EXTENSION
Fully hydraulic X-type (floats mounted integrally)
Slides and jacks each provided with independent
operation device.
Fully extended width
7.3m
Middle extended width
6.7m, 5.5m
Minimum extended width
4.0m
MAX.WORKING RADIUS
Boom
Jib
34.0m
39.6m
31.5m
BOOM EXTENSION SPEED
31.5m/122s
JIB LENGTH
7.8m, 12.5m
OPERATION METHOD
MAIN WINCH SINGLE LINE SPEED
Hydraulic pilot valve operation
124m/min (5th layer)
MAX. VERTICAL LOAD CAPACITY OF OUTRIGGER
MAIN WINCH HOOK SPEED
38.8t
10.3m/min (12 part-line)
HYDRAULIC PUMPS
AUXILIARY WINCH SINGLE LINE SPEED
124m/min (5th layer)
2 variable piston pumps
2 gear pumps
AUXILIARY WINCH HOOK SPEED
HYDRAULIC OIL TANK CAPACITY
124m/min (1 part-line)
570 liters
BOOM ELEVATION ANGLE
SAFETY DEVICES
0
- 83
Automatic moment limiter(AML)
Multi-display indication
Swing automatic stop device
Over-winding cutout device
Working area control device
Free-fall interlock device
Outrigger extension width detector
Winch drum lock
Level gauge
Hook safety latch
Hydraulic safety valve
Telescopic counterbalance valve
Elevation counterbalance valve
Power tilt counterbalance valve
Jack pilot check valve
Swing lock
BOOM ELEVATION SPEED
0
- 83/65s
SWING ANGLE
360continue
SWING SPEED
2.1rpm
WIRE ROPE
Main Winch
18mm x 224m (Diameter x Length)
Spin-resistant wire rope
Auxiliary Winch
18mm x 120m (Diameter x Length)
Spin-resistant wire rope
BOOM
EQUIPMENT
6-section hydraulically telescoping boom of hexagonal
box construction
(stages 2,3: synchronized; stages 4,5,6: synchronized)
BOOM EXTENSION
3 double-acting hydraulic cylinders
2 wire rope type telescoping devices
JIB
Quick-turn type (2-staged type which stores alongside
below the base boom section and extendible from under
the boom (with 2nd stage being a pull-out type))
Hydraulic non-stage offset (5- 45) type
Air-conditioner with dehumidifier
Hydraulic oil temperature indication lamp
Radio
Oil cooler
Visual-type winch drum rotation indicator
Operation pedals
ISO arrangement: for telescoping/auxiliary hoisting
TADANO arrangement: for elevating/telescoping
Television (option)
- 36 -
TR-500M-3-00101
CARRIER SPECIFICATIONS
GENERAL DATA
ENGINE
DIMENSIONS
Model
NISSAN DIESEL MOTOR CO., LTD. PF6T
(with turbo charger)
Type
4-cycle, 6-cylinder, direct-injection, water-cooled
diesel engine
Piston displacement 12,503cc
Max. output
350PS at 2,100rpm
Max. torque
136kg .m at 1,400rpm
Overall length
Overall width
Overall height
Wheel base
Tread Front
Rear
TORQUE CONVERTER
WEIGHTS
3-element, 1-stage unit (with automatic lock-up
mechanism)
Gross vehicle weight
Total
Front
Rear
TRANSMISSION
Automatic and manual transmission
Power shift type (wet multi-plate clutch)
4 forward and 1 reverse speeds (with Hi/Low settings)
37,795kg
18,895kg
18,900kg
PERFORMANCE
Max. traveling speed
Gradeability (tan )
Min. turning radius
REDUCER
Axle dual-ratio reduction
DRIVE
2-wheel drive (4X2) / 4-wheel drive (4X4) selection
FRONT AXLE
Full floating type
REAR AXLE
Full floating type
SUSPENSION
Front
Hydro-pneumatic suspension (with hydraulic lock cylinder)
Rear
Hydro-pneumatic suspension (with hydraulic lock cylinder)
STEERING
Fully hydraulic power steering
With reverse steering correction mechanism
BRAKE SYSTEM
Service Brake
Hydro-pneumatic brake
Disk brake
Parking Brake
Mechanically operated, internal expanding duo-servo
shoe type acting on drum at transmission case rear.
Auxiliary Brake
Hydrodynamic retarder
Electro-pneumatic operated exhaust brake
Auxiliary braking device for operations
FRAME
Welded box-shaped structure
ELECTRIC SYSTEM
24 V DC. 2 batteries of 12V (120Ah)
FUEL TANK CAPACITY
300 liters
TIRES
Front
Rear
11,850mm
2,960mm
3,710mm
4,850mm
2,380mm
2,380mm
505/95R25 183E ROAD
505/95R25 183E ROAD
CAB
One-man type
With interior equipment
Liquid filled rubber mounted type
Fully adjustable foldable seat
(with headrest and seat belt)
Adjustable handle (tilt, telescoping)
Intermittent type windshield/roof wiper (with washer)
Power window
Side visor
SAFETY DEVICES
Emergency steering device
Suspension lock device
Rear wheel steering lock device
Engine over-run alarm
Overshift prevention device
Parking brake alarm
Powered mirror for right side of boom
Monitor TV for left side of boom
EQUIPMENT
Centralized oiling device
- 37 -
49km/h
0.57
6.3m (4-wheel steering)
10.8m (2-wheel steering)
TR-500M-3-00101
TOTAL RATED LOADS
(1) With outriggers set
[BOOM]
Unit:ton
Outriggers fully extended (7.3m)
A
B
9.7m
16.0m
22.3m
28.6m
-360
34.9m
38.05m
41.2m
2.5m
50.0
30.0
20.0
12.0
3.0m
50.0
30.0
20.0
12.0
3.5m
45.0
30.0
20.0
12.0
11.0
4.0m
39.5
30.0
20.0
12.0
11.0
8.5
4.5m
35.5
30.0
20.0
12.0
11.0
8.5
5.0m
32.0
29.0
20.0
12.0
11.0
8.5
7.0
5.5m
29.0
27.0
19.8
12.0
11.0
8.5
7.0
6.0m
26.5
24.6
18.7
12.0
11.0
8.5
7.0
6.5m
24.0
22.7
17.6
12.0
11.0
8.5
7.0
7.0m
22.0
20.9
16.7
12.0
11.0
8.5
7.0
8.0m
17.8
15.0
12.0
10.1
8.5
7.0
9.0m
14.6
13.4
11.5
9.4
8.5
7.0
10.0m
12.0
11.3
10.5
8.7
7.9
7.0
11.0m
10.0
9.4
9.5
8.1
7.35
6.5
12.0m
8.3
8.0
8.6
7.5
6.85
6.0
13.0m
7.1
6.8
7.4
7.0
6.4
5.6
14.0m
5.9
6.6
6.5
6.0
5.3
16.0m
4.2
5.0
5.4
5.3
4.7
18.0m
3.0
3.8
4.3
4.5
4.15
20.0m
2.95
3.4
3.55
3.6
22.0m
2.3
2.7
2.85
3.0
24.0m
1.65
2.1
2.3
2.4
26.0m
1.65
1.85
1.95
28.0m
1.25
1.4
1.55
30.0m
0.9
1.0
1.2
0.7
0.9
32.0m
34.0m
a ()
0.6
083
A= Boom length B= Working radius
a= Boom angle range (for the unladen condition)
- 38 -
1683
2883
TR-500M-3-00101
[BOOM]
Unit:ton
Outriggers middle extended (6.7m)
A
B
9.7m
16.0m
22.3m
28.6m
34.9m
-Over sides38.05m
41.2m
2.5m
50.0
30.0
20.0
12.0
3.0m
50.0
30.0
20.0
12.0
3.5m
43.0
30.0
20.0
12.0
11.0
4.0m
38.0
30.0
20.0
12.0
11.0
8.5
4.5m
34.0
30.0
20.0
12.0
11.0
8.5
5.0m
30.5
29.0
20.0
12.0
11.0
8.5
7.0
5.5m
27.5
27.0
19.8
12.0
11.0
8.5
7.0
6.0m
24.2
24.0
18.7
12.0
11.0
8.5
7.0
6.5m
21.4
21.2
17.6
12.0
11.0
8.5
7.0
7.0m
19.0
18.9
16.7
12.0
11.0
8.5
7.0
8.0m
15.7
15.0
12.0
10.1
8.5
7.0
9.0m
12.8
12.3
11.5
9.4
8.5
7.0
10.0m
10.4
9.9
10.5
8.7
7.9
7.0
11.0m
8.5
8.2
9.1
8.1
7.35
6.5
12.0m
7.1
6.85
7.75
7.5
6.85
6.0
13.0m
6.1
5.7
6.7
7.0
6.4
5.6
14.0m
4.8
5.8
6.3
6.0
5.3
16.0m
3.4
4.3
4.8
5.0
4.7
18.0m
2.3
3.2
3.75
3.9
4.0
20.0m
2.35
2.9
3.1
3.25
22.0m
1.7
2.2
2.4
2.6
24.0m
1.2
1.65
1.8
2.0
26.0m
1.2
1.4
1.55
28.0m
0.8
1.0
1.1
30.0m
0.5
0.7
0.8
32.0m
a ()
0.5
083
2383
A= Boom length B= Working radius
a= Boom angle range (for the unladen condition)
- 39 -
2783
3683
TR-500M-3-00101
[BOOM]
Unit:ton
Outriggers middle extended (5.5m)
A
B
9.7m
16.0m
22.3m
28.6m
34.9m
-Over sides38.05m
41.2m
2.5m
45.0
30.0
20.0
12.0
3.0m
45.0
30.0
20.0
12.0
3.5m
41.0
30.0
20.0
12.0
11.0
4.0m
36.8
30.0
20.0
12.0
11.0
8.5
4.5m
33.2
30.0
20.0
12.0
11.0
8.5
5.0m
30.2
27.0
20.0
12.0
11.0
8.5
7.0
5.5m
25.2
24.0
19.8
12.0
11.0
8.5
7.0
6.0m
21.0
20.7
18.7
12.0
11.0
8.5
7.0
6.5m
18.2
18.0
17.0
12.0
11.0
8.5
7.0
7.0m
15.5
15.2
15.1
12.0
11.0
8.5
7.0
8.0m
11.9
11.6
12.0
10.1
8.5
7.0
9.0m
9.5
9.15
10.2
9.4
8.5
7.0
10.0m
7.65
7.35
8.35
8.4
7.9
7.0
11.0m
6.25
6.0
7.0
7.3
7.35
6.5
12.0m
5.15
4.9
5.85
6.3
6.3
6.0
13.0m
4.2
4.0
5.0
5.5
5.5
5.6
14.0m
3.25
4.2
4.75
4.8
5.0
16.0m
2.05
3.0
3.55
3.6
3.8
18.0m
1.05
2.1
2.65
2.7
2.9
20.0m
1.35
1.95
2.05
2.25
22.0m
0.7
1.3
1.5
1.7
0.8
1.0
1.2
0.6
0.8
4483
4983
24.0m
26.0m
a ()
083
2483
A= Boom length B= Working radius
a= Boom angle range (for the unladen condition)
- 40 -
3883
TR-500M-3-00101
[BOOM]
Unit:ton
Outriggers minimum extended (4.0m)
A
B
9.7m
16.0m
22.3m
28.6m
34.9m
-Over sides38.05m
41.2m
2.5m
40.0
30.0
20.0
12.0
3.0m
40.0
30.0
20.0
12.0
3.5m
33.4
30.0
20.0
12.0
11.0
4.0m
26.5
27.0
20.0
12.0
11.0
8.5
4.5m
21.0
21.5
20.0
12.0
11.0
8.5
5.0m
17.4
17.4
17.0
12.0
11.0
8.5
7.0
5.5m
14.6
14.5
14.2
12.0
11.0
8.5
7.0
6.0m
12.5
12.2
12.0
12.0
11.0
8.5
7.0
6.5m
10.5
10.5
10.4
11.3
10.3
8.5
7.0
7.0m
9.0
9.1
9.0
10.0
9.5
8.5
7.0
8.0m
6.9
6.8
7.8
8.0
8.0
7.0
9.0m
5.4
5.25
6.2
6.65
6.7
6.5
10.0m
4.3
4.1
5.0
5.6
5.7
5.9
11.0m
3.4
3.15
4.05
4.65
4.75
5.0
12.0m
2.6
2.45
3.3
3.85
4.0
4.2
13.0m
1.85
1.75
2.7
3.2
3.35
3.55
1.15
2.15
2.7
2.85
3.0
1.2
1.8
2.0
2.15
1.1
1.3
1.5
0.75
0.95
14.0m
16.0m
18.0m
20.0m
a ()
083
3883
4783
A= Boom length B= Working radius
a= Boom angle range (for the unladen condition)
- 41 -
5383
5683
6083
TR-500M-3-00101
[JIB]
Unit:ton
Outriggers fully extended (7.3m)
7.8m
C
D
5
B (m)
83
6.6
76
13.6
74
72
12.5m
25
45
B (m)
B (m)
3.5
9.0
2.4
10.7
3.5
15.5
2.4
16.8
15.3
3.25
17.3
2.2
17.0
2.95
18.8
2.1
70
18.7
2.65
20.6
68
20.3
2.4
22.3
65
22.6
2.1
60
26.5
1.7
55
29.8
50
32.7
E ()
-360
-
25
45
B (m)
B (m)
B (m)
1.6
8.0
2.5
11.5
1.4
14.5
0.8
1.6
15.9
2.5
18.7
1.4
21.2
0.8
18.4
1.5
17.9
2.25
20.5
1.4
22.9
0.8
20.1
1.48
19.7
2.05
22.4
1.3
24.7
0.8
1.95
21.6
1.45
21.6
1.9
24.2
1.25
26.4
0.8
1.85
23.2
1.43
23.4
1.75
25.9
1.2
28.0
0.8
24.5
1.7
25.3
1.4
25.9
1.55
28.3
1.1
30.2
0.77
28.1
1.45
28.8
1.3
30.1
1.3
32.2
0.95
33.8
0.74
1.2
31.3
1.1
31.8
1.0
33.8
1.0
35.8
0.85
37.1
0.72
0.65
34.1
0.55
34.4
0.5
36.9
0.5
38.7
0.43
39.6
0.4
49
a ()
83
Unit:ton
Outriggers middle extended (6.7m)
7.8m
C
D
-Over sides12.5m
25
45
25
45
E ()
B (m)
B (m)
B (m)
B (m)
B (m)
B (m)
83
6.6
3.5
9.0
2.4
10.7
1.6
8.0
2.5
11.5
1.4
14.5
0.8
76
13.6
3.5
15.5
2.4
16.8
1.6
15.9
2.5
18.7
1.4
21.2
0.8
74
15.3
3.25
17.3
2.2
18.4
1.5
17.9
2.25
20.5
1.4
22.9
0.8
72
17.0
2.95
18.8
2.1
20.1
1.48
19.7
2.05
22.4
1.3
24.7
0.8
70
18.7
2.65
20.6
1.95
21.6
1.45
21.6
1.9
24.2
1.25
26.4
0.8
68
20.3
2.4
22.3
1.85
23.2
1.43
23.4
1.75
25.9
1.2
28.0
0.8
65
22.6
2.1
24.5
1.7
25.3
1.4
25.9
1.55
28.3
1.1
30.2
0.77
60
26.4
1.6
28.1
1.45
28.8
1.3
30.1
1.3
32.2
0.95
33.8
0.74
55
29.6
0.9
31.2
0.8
31.7
0.75
33.6
0.75
35.6
0.65
37.0
0.55
53
30.8
0.65
32.3
0.6
32.7
0.55
34.9
0.55
36.8
0.5
38.1
0.4
52
a ()
B= Working radius C= Jib length D= Jib offset
E= Boom angle M= Total rated loads
a= Boom angle range (for the unladen condition)
- 42 -
83
TR-500M-3-00101
[JIB]
Unit:ton
Outriggers middle extended (5.5m)
7.8m
C
D
5
B (m)
83
6.6
76
13.6
74
72
12.5m
25
45
B (m)
B (m)
3.5
9.0
2.4
10.7
3.5
15.5
2.4
16.8
15.3
3.25
17.3
2.2
17.0
2.95
18.8
2.1
70
18.7
2.65
20.6
68
20.3
2.3
22.3
65
22.3
1.65
62
24.6
1.1
E ()
-Over sides-
25
45
B (m)
B (m)
B (m)
1.6
8.0
2.5
11.5
1.4
14.5
0.8
1.6
15.9
2.5
18.7
1.4
21.2
0.8
18.4
1.5
17.9
2.25
20.5
1.4
22.9
0.8
20.1
1.48
19.7
2.05
22.4
1.3
24.7
0.8
1.95
21.6
1.45
21.6
1.9
24.2
1.25
26.4
0.8
1.85
23.2
1.43
23.4
1.75
25.9
1.2
28.0
0.8
24.4
1.45
25.3
1.25
25.8
1.4
28.3
1.1
30.2
0.77
26.3
0.95
27.1
0.8
28.0
0.85
30.5
0.7
32.5
0.65
61
a ()
83
Unit:ton
Outriggers minimum extended (4.0m)
7.8m
C
D
-Over sides12.5m
25
45
25
45
E ()
B (m)
B (m)
B (m)
B (m)
B (m)
B (m)
83
6.6
3.5
9.0
2.4
10.7
1.6
8.0
2.5
11.5
1.4
14.5
0.8
76
13.6
3.5
15.5
2.4
16.8
1.6
15.9
2.5
18.7
1.4
21.2
0.8
74
14.9
2.6
17.3
2.2
18.4
1.5
17.9
2.1
20.5
1.4
22.9
0.8
72
16.6
2.0
18.6
1.7
20.1
1.45
19.3
1.6
22.4
1.3
24.7
0.8
70
18.0
1.5
20.2
1.25
21.3
1.1
a ()
69
71
83
B= Working radius C= Jib length D= Jib offset
E= Boom angle M= Total rated loads
a= Boom angle range (for the unladen condition)
- 43 -
83
TR-500M-3-00101
PRECAUTIONS TO BE TAKEN WHEN THE OUTRIGGERS ARE EXTENDED:
1. The total rated loads shown are for the case where the crane is set horizontally on firm level ground. They include
the weights of the slings and hooks (main hook: 460kg, 25t hook: 290kg, auxiliary hook: 100kg).
The values above the bold lines are based on the crane strength while those below are based on the crane stability.
2. Since the total rated loads are based on the actual working radii including the deflection of the boom, operations
should be performed in accordance with the working radii.
3. Jib operations should be performed in accordance with the boom angle, irrespective of the boom length. The working
radii are reference values for the case where the jib is mounted to a 41.2m boom.
4. The total rated load for the single top shall be the value obtained by subtracting the weight of the hook mounted to
the boom from the total rated load of the boom and must not exceed 4.0t.
5. As a rule, free-fall operation should be performed only when lowering the hook alone. If a hoisted load must be
lowered by free-fall operation, the load must be kept below 1/5th of the total rated load and sudden braking
operations must be avoided.
6. The chart below shows the standard number of part lines for each boom length. The load per line should not exceed
4.17t for the main winch and 4.0t for the auxiliary winch.
9.7m
16.0m
22.3m
28.6m
34.9m
38.05m
41.2m
Jib
12
5(6)
A= Boom length
The value in( ) is for a 25t hook.
H= No. of part-lines
7. The hoisting performance for the "Over sides" range will differ according to the extended width of the outriggers.
Operations should be performed in accordance with the performance corresponding to the extended width.
Also, although the hoisting performances for the "Over front" and "Over rear" ranges are equivalent to those of the
"outriggers fully extended" condition, the front and rear ranges (angle a) will differ according to the width to which the
outriggers are extended in the left and right directions.
Extended width
Middle extended
(6.7m)
Middle extended
(5.5m)
Minimum extended
(4.0m)
Angle a
30
25
15
- 44 -
TR-500M-3-00101
(2) Without outriggers
Unit:ton
Stationary
9.7m Boom
16.0m Boom
Creep (travelling at 1.6km/h or less)
22.3m Boom
9.7m Boom
16.0m Boom
22.3m Boom
(m)
3.0
20.0
12.5
15.0
3.5
20.0
12.5
4.0
20.0
4.5
10.0
14.5
8.0
10.5
6.5
15.0
10.0
14.5
8.0
10.5
6.5
11.0
15.0
10.0
11.0
5.5
14.5
8.0
10.5
6.5
8.0
4.5
18.0
9.0
15.0
8.5
11.0
5.5
12.9
6.8
10.5
6.5
8.0
4.5
5.0
16.0
7.4
15.0
7.0
11.0
5.5
11.5
5.8
10.5
5.3
8.0
4.5
5.5
14.3
6.2
14.0
5.7
11.0
5.3
10.3
4.8
10.5
4.4
8.0
4.1
6.0
12.8
5.2
13.0
4.8
11.0
4.4
9.3
4.0
10.0
3.7
8.0
3.55
6.5
11.7
4.35
12.0
4.05
10.0
3.7
8.6
3.35
9.3
3.15
8.0
3.05
7.0
10.8
3.7
11.0
3.4
9.2
3.0
7.9
2.8
8.5
2.7
7.4
2.55
8.0
9.0
2.3
7.7
2.0
7.0
1.85
6.4
1.65
9.0
7.0
1.3
6.4
1.15
5.9
1.1
5.4
0.95
10.0
5.7
0.6
5.4
4.8
0.5
4.5
11.0
4.7
4.5
3.9
3.7
12.0
4.0
3.8
3.3
3.1
13.0
3.4
3.2
2.8
2.6
14.0
2.7
2.2
16.0
1.8
1.5
18.0
1.05
0.85
a ()
078
40
25
61
78
78
78
B= Working radius F= Front G= 360
a= Boom angle range (for the unladen condition)
- 45 -
078
40
25
61
78
78
78
TR-500M-3-00101
PRECAUTIONS TO BE TAKEN WHEN THE OUTRIGGERS ARE NOT MOUNTED:
1. The total rated loads shown are for the case where the tire air pressure on firm level ground is as specified
(8.00kg/cm 2) and the suspension-lock cylinder is retracted as much as possible. They include the weights of the
slings and hooks (main hook: 460kg, 25t hook: 290kg, auxiliary hook: 100kg).
The values above the bold lines are based on the crane strength while those below are based on the crane stability.
The foundation, working conditions, etc. should be taken into consideration for actual work.
2. Since the working radii are based on the actual values including the deflection of the boom and the tires, operations
should be performed in accordance with the working radii.
3. "Over front" crane operations should be performed only when "Over front" is displayed on the standard display. The
boom must be kept inside a 2area over front of the carrier when performing "Over front" crane operations without
the outriggers.
Approx.2
4. The chart below shows the standard number of part lines for each boom length. The load per line should not exceed
4.17t for the main winch and 4.0t for the auxiliary winch.
9.7m
16.0m
22.3m
Single top
12
5(6)
A= Boom length
The value in( ) is for a 25t hook.
H= No. of part-lines
5. The total rated load for the single top shall be the value obtained by subtracting the weight of the hook mounted to
the boom from the total rated load of the boom and must not exceed 4.0t.
6. Free-fall operations should not be performed without outriggers.
Booms over 22.3m in length and jibs should not be used without outriggers.
7. The "Drive Mode Selection" switch should be set to "4-wheelLo" for creeping while hoisting a load.
8. When creeping while hoisting a load, the swing brake should be applied, the load should be kept as close to the
ground as possible but not touching the ground and the speed should be kept at 1.6km/h or less. In particular, any
abrupt steering, starting or braking must be avoided.
9. Crane operations should not be performed when creeping while hoisting a load.
- 46 -
TR-500M-3-00101
WORKING RADIUS - LIFTING HEIGHT
JI
JI
OM
BO
1. The deflection of the boom is not incorporated in the figure above.
2. The figure above is for the case where the outriggers are fully extended (360).
- 47 -
OM
NOTES:
BO
OM
BO
OM
BO
OM
BO
OM
BO
O
BO
WORKING RADIUS (m)
LIFTING HEIGHT (m)
TR-500M-3-00101
DIMENSIONS (1/100)
Min.
Max.
- 48 -
