KLINGER Maxiprofile
(Kamprofile) Gaskets-
Type T109
KLINGER type 109 exhibit excellent results,
particularly where high pressures, temperatures
and therefore, high bolt loads are to be controlled.
A solid metal ring is machined to a specific Klinger
profile on each contact face which provides a
serrated surface finish. Under compression the
finish develops high surface stress values enabling
the soft coating to fill any imperfections in the
flange facing. A variety of surface coatings can be
applied to service high temperature, pressure or
corrosive media applications.
Temperatures range from cryogenic to 1090C with
a wide chemical resistance.
Applications of T109 Gaskets:
Heat Exchanger and Vessel
applications
High and low temperatures
Pressures of up to 250 bar
Low bolt loads
Small flange widths
General Properties of
T109 Gaskets:
Have a wide range of
seating stresses under
which the seal is effected
and maintained
Can be used when there is
insufficient bolt load to seal
conventional gasket materials
Easy to handle and fit
Suitable for a wide range
of operating conditions
The soft facing layer
prevents damage to the
flange
Provide a high integrity
seal including thermo cycling
and shock loading conditions
Can be refurbished with a
new facing layer and
reused depending on condition of core
Materials :
Support Ring:
Stainless Steel 316L (standard)
Available ex stock are 304L, 321,
mild steel, titanium, duplex, inconel,
monel.
Other materials are available on
request and include aluminium,
hastelloy and many others.
Coating Materials:
Graphite, PTFE , Mica, Klingersil plus
others.
Standard core design is parallel which offers the
advantages of even stress distribution across the
gasket face. This type of profile ensures a uniform
high seating stress and is effective for low bolt load
applications.
Other Profiles Available:
Core Design:
LA1 Lateral profiled joint with
guide ring. Most often used for
standard flanges.
LA2 Lateral profiled joint. Most
often used with or without pass bars
for heat exchangers.
LA3 Lateral profiled joint with
floating guide ring.
0. 1 1. 0
90
0
.
4
5
0. 2
0
.
5
Available to suit standard flanges
ASME/ANSI B16.5 ratings 150#- 2500#.
ASME B16.47 Series A (MSS SP44).
ASME B16.47 Series B (API 605).
DIN.
Others on request.
Typical Heat Exchangers Gasket Locations
1 2 4
5 3
6
6
Gasket Locations:
1. Channel box cover. 2. Shell to tubesheet. 3. Tubesheet to Channel box.
4. Shell cover. 5. Floating Head. 6. Flanges
Typical Heat Exchangers Styles
KX - 1 KX - 2 KX - 3 KX - 6 KX - 7 KX - 9 KX - 10 KX - 11 KX - 13 KX - 15 KX - 16
KX - 17 KX - 18 KX - 19 KX - 21 KX - 22 KX - 25 KX - 26 KX - 27 KX - 28 KX - 29 KX - 31
KX - 32 KX - 34 KX - 35 KX - 37 KX - 39 KX - 41 KX - 42 KX - 43 KX - 44 KX - 47 KX - 48
KX - 49 KX - 53 KX - 54 KX - 55 KX - 56 KX - 57 KX - 58 KX - 65 KX - 71
For sales and technical advice, please contact:
Tel: +61 08 9350 1100 or Toll Free No.1300 79 82 79 (in Australia).
Email:sales@klinger.com.au or technical_service@klinger.com.au.
Website: www.klinger.com.au
Klinger Branch Offices:
Other KLINGER
Products
Spiral wound Gaskets.
Metal Ring Joint Gaskets(RTJ).
Metal Clad Gaskets.
KLINGERsil sheeting.
KLINGERgraphite PSM.
KLINGERtop-chem Grades.
KLINGER Pump and Valve Packings.
KLINGER Liquid and Magnetic Level Gauges.
KLINGER Piston Valves.
Spray Shields.
For details of the nearest Klinger Branch and contact telephone numbers , please visit our
website: www.klinger.com.au
All information and recommendations contained in this publication are to the best of our knowledge correct. Since conditions of use are beyond our control users
must satisfy themselves that products are suitable for the intended processes and uses. No warranty is given or implied in respect of information or recommendations
or that any use of products will not infringe rights belonging to other parties. We will not be liable for any loss or damage resulting in way from any reliance on this
publication or from any goods manufactured by us. We reserve the right to change product design and properties without notice. Nothing in this clause excludes,
restricts or modifies any condition, warranty, right or remedy which is conferred on you by the Trade Practices Act 1974 or any other consumer legislation.
Sealing with Security
RKA 8990109 Nov/08
