Scribd
Upload
772 views1 page

AS 4041 Pipe Pressure Rating Guide

This document contains calculations for determining the design pressure rating of a straight pipe according to AS 4041 Clause 3.14. It lists the piping class, design temperature, selected and nominal wall thicknesses, material properties, diameters, and other variables needed for the pressure rating calculation. The design pressure calculated is #DIV/0! kPa.

Uploaded by

bakelly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
772 views1 page

AS 4041 Pipe Pressure Rating Guide

This document contains calculations for determining the design pressure rating of a straight pipe according to AS 4041 Clause 3.14. It lists the piping class, design temperature, selected and nominal wall thicknesses, material properties, diameters, and other variables needed for the pressure rating calculation. The design pressure calculated is #DIV/0! kPa.

Uploaded by

bakelly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

TITLE 1 3-Jun-2014

TITLE 2
TITLE 3
TITLE 4
PRESSURE RATING OF A STRAIGHT PIPE (AS 4041 CLAUSE 3.14)
PIPING CLASS: (AS 4041 CLAUSE 1.5)
DESIGN TEMPERATURE, T =
o
C (AS 4041 CLAUSE 3.3)
SELECTED PIPE WALL THICKNESS, T = mm
MILL TOLERANCE = %
SUMMATION OF APPROPRIATE ALLOWANCES, G = mm (AS 4041 CLAUSE 3.13)
MATERIAL:
DESIGN STRENGTH, f = MPa (AS 4041 CLAUSE 3.11)
OUTSIDE DIAMETER, D = mm
WELD JOINT FACTOR, e = (AS 4041 CLAUSE 3.12.2)
PIPING CLASS FACTOR, M = 0.7 (AS 4041 TABLE 3.12.3)
WELD JOINT REDUCTION FACTOR, W = 1.0 (AS 4041 TABLE 3.12.5)
INSIDE DIAMETER, d = 0.00 mm
NOMINAL WALL THICKNESS, t
n
= 0.00 mm
t
n
-G = 0.00 mm
CONSIDERATION SHOULD BE GIVEN TO THE CHOICE OF DESIGN, REFER TO AS 4041 CLAUSE 3.14.3 (b)
DESIGN PRESSURE, p = #DIV/0! kPa (AS 4041 CLAUSE 3.14.3)
#DIV/0!
232186456.xls.ms_office Page 1

You might also like