Scribd
Upload
118 views1 page

054604g0 Op Ackermann Katalog

This document describes several software modules: 1) FTC module connects the Clino Call DECTplus system to the operating computer of a communication system, allowing call messages to be transmitted and displayed. 2) Software module acts as a media gateway between an Esser fire alarm system and an Ackermann call system via FAT 3000, converting data from the fire alarm system into call information for the call system. 3) The document also lists accessories like serial connection cables and emphasizes that inspection of hardware/software compatibility is required.

Uploaded by

Imran Mughle Azam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views1 page

054604g0 Op Ackermann Katalog

This document describes several software modules: 1) FTC module connects the Clino Call DECTplus system to the operating computer of a communication system, allowing call messages to be transmitted and displayed. 2) Software module acts as a media gateway between an Esser fire alarm system and an Ackermann call system via FAT 3000, converting data from the fire alarm system into call information for the call system. 3) The document also lists accessories like serial connection cables and emphasizes that inspection of hardware/software compatibility is required.

Uploaded by

Imran Mughle Azam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

83WE130

83WE140
83WE150
Clino Call DECTplus coupling
DECT/Paging system connection via ESPA 4.4.4.
Software FTC module for Esser FAT 3000
Software module as basic software for connecting the system Clino Call DECTplus to the
operating computer of the communication system. Option to adapt settings to project
specific requirements of the nursing facility. Call messages from the call system are trans-
mitted to the connected Clino Call DECTplus system according to configuration and are
displayed by the configured DECTplus handsets.
Administrator access rights required to be able to adapt e.g. serial interface to system envi-
ronment of the call system.
Memory Medium with application software for the following functions:
- Configuration tool with database management system for data backup
- Configuration of the serial interface (RS232 / RS422)
- Interface for general call system software (IPC)
- Freely configurable recipient addresses for each nurse call group and call type groups
- Allocation of call types to higher-level call type groups
- Setup of different services (e.g., day, night service)
- Allocation of repetition times
- Adjustment of acoustic call tones
- Filter options for recipient address
- Configuration of different escalations for each call type group
- Definition of display format of messages to be transmitted
- Text message transmission of system messages to Clino Call DECTplus
- Service functions
- Simple system management tools for system analysis (Sys Log, etc.)
- Creation of a recipient list (file)
- Password protected access
Prerequisite:
- Operating computer of the communication system with available RS232 serial interface
- Serial connection cable
As 83WE130, but connection to the communication system via ESPA 4.4.4 or an alterna-
tive protocol.
Software module as basic software for unidirectional data connection of an ESSER fire
alarm system to an Ackermann call system via FAT 3000 (ESPA 4.4.4.). As a media
gateway, the software module converts incoming data from the fire alarm system into call
information for further processing (e.g. display) in the call system.
Configuration of the required display texts in FAT, transferred in plain text (incoming and
outgoing message), as well as the option of assigning unique IDs in the call system.
Messages received from the fire alarm system are forwarded to the call system for
secondary alarm and to other system software such as a graphical user interface.
Prerequisite:
- Operating computer of the communication system with available RS232 serial interface
- FAT3000 or FAT with compatible ESPA 4.4.4. transmission protocol
- ESSER fire alarm system supporting FAT3000
- Serial connection cable
Clino Systevo Central components
Accessories
7608944 RS232 serial connection cable
41
1
2
3
4
5
6
7
8
9
10
11
2
Inspection of hardware/software compatibility required!
Inspection of hardware/software compatibility required!
The restrictions of the respective systems are to be taken into consideration. Inspection of
software compatibility required!

You might also like