XMC 2Go
Initial start-up Guide
Version 1.1
Change History
Delta to last Version (1.0)
Change of Hyperlink Destination on Page 5
(previously page 4)
Page 2 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
Preamble
Dear valued customer,
thank you for choosing the XMC 2Go Kit with the XMC1100
Microcontroller. We hope you will enjoy your experience with
maybe the worlds smallest, fully featured Microcontroller
Evaluation Kit. The following content is to give you a hand for a
quick initial start-up and hints how to experience the
preprogrammed factory default program.
Page 3 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
Contents
Toolchain and initial power-up
Experience the preprogrammed factory default program of the
XMC 2Go
Page 4 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
Toochain
The XMC 2Go is preprogrammed with XMC_2Go_Initial_Start as
the factory default program. It controls the user LEDs, send
predefined messages via UART and interacts with the user as it
receives characters from the terminal program and sends these
very same characters back to the terminal.
The Best and easiest way to
experience XMC 2Go and the
XMC_2Go_Initial_Start
program is to use the free of
charge toolchain DAVE from
Infineon. Download from
www.infineon.com/dave and
follow the installation
instructions.
Also please install the J-Link
driver (here illustrated version
V4.74) as stated in the DAVE
installation description.
Page 5 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
Initial power-up
The easiest way to power-up the XMC 2Go is via USB (Micro USB). Once
powered the 2 red User LEDs will start to blink immediately as they are
controlled by the preprogrammed XMC_2Go_Initial_Start factory default
program.
The green LED indicates
proper power and debug
and will also light up. If
your XMC 2Go is powered
through the USB port of
your PC (with the toolchain
installed as previously
described), the green Power
& Debug LED blinks initially
at the first startup of the
XMC 2Go. After few seconds
the J-Link Driver is
enumerated and the green
Power & Debug LED
illuminates constantly.
Page 6 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
Contents
Toolchain and initial power-up
Experience the preprogrammed factory default program of the
XMC 2Go
Page 7 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
Receive messages from XMC 2Go on a
terminal program
As mentioned in the previous section the preprogrammed
XMC_2Go_Initial_Start program not only controls the 2 User
LEDs. It also sends predefined messages via UART and interacts
with the user as it receives characters from the terminal
program and sends these very same characters back to the
terminal.
Open a terminal program (e.g. the free of charge program
HTerm @ http://www.heise.de/download/hterm.html) to
experience this part of the XMC_2Go_Initial_Start program and
setup the UART with following settings and connect:
Baudrate: 115.2kbps; Data bits: 8; Stop bits: 1; Parity bit:
None
Page 8 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
Receive messages from XMC 2Go on a
terminal program contd
Now the terminal program displays the 2 messages
Visit www.infineon.com/XMC
Visit www.infineonforums.com
sent from XMC 2Go periodically every 2 seconds as character string
Check out the two websites for product information and support &
exchange in our tech community
Hint for using HTerm:
For correct
interpretation and
display of the new line
command please use
the settings as
illustrated
Page 9 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
User interaction with XMC 2Go via terminal
program
Also use the terminal program to
interact with the XMC 2Go.
Simply type in single characters
or strings in the terminal
program. The XMC 2Go receives
them and send these very same
characters/strings back to the
terminal program.
Now you successfully
experienced the preprogrammed
XMC_2Go_Initial_Start factory
default program.
Get appetite for more?
Please have a look on the
XMC 2Go Write your first
program Guide
Page 10 2014-03-03 Copyright Infineon Technologies AG 2014. All rights reserved.
