0% found this document useful (0 votes)

322 views98 pages

CHD

The document outlines the scope and work of the CHD 1 Inorganic Chemicals Sectional Committee of the Bureau of Indian Standards Chemical Department. The committee is responsible for formulating Indian Standards on terminology, methods of sampling and testing, codes of practice, and specifications for all inorganic chemicals except those related to electroplating. It provides a list of 90 published standards within the committee's purview covering a wide range of inorganic chemicals and their properties. The list includes standards for chemicals like sodium sulphite, soda ash, caustic soda, nitric acid, sulphuric acid, and many others. It also outlines the committee's liaison responsibilities with international standardization bodies.

Uploaded by

Bhupesh Mulik

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

322 views98 pages

CHD

Uploaded by

Bhupesh Mulik

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 98

CHD

PROGRAMME OF WORK
(As on 1 July 2011)

Chemical Department
(CHD)

BUREAU OF INDIAN STANDARDS

MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110 002

CONTENTS
COMMITTEE WISE POSITISION OF WORK OF CHEMICAL DIVISION COUNCIL (CHDC)

Sl.No.

Title

STATISTICS AT A GLANCE

CHD 1

INORGANIC CHEMICALS SECTIONAL COMMITTEE

CHD 5

ELECTROPLATING AND PHOTOGRAPHIC MATERIAL

SECTIONAL COMMITTEE

CHD 6

INDUSTRIAL GASES SECTIONAL COMMITTEE

CHD 8

OCCUPATIONAL SAFETY, HEALTH AND CHEMICAL

HAZARDS SECTIONAL COMMITTEE

CHD 9

CERAMICWARE SECTIONAL COMMITTEE

CHD10

GLASS, GLASSWARE AND LABORATORYWARE

SECTIONAL COMMITTEE

CHD 13

WATER QUALITY FOR INDUSTRIAL PURPOSES SECTIONAL

COMMITTEE

CHD 14

PRINTING INKS, STATIONERY AND ALLIED PRODUCTS

SECTIONAL COMMITTEE

CHD 15

20.

CHD 32

ENVIRONMENT PROTECTION & WASTE MANAGEMENT

SECTIONAL COMMITTEE

21.

CHD 34

ENVIRONMENTAL MANAGEMENT SECTIONAL

COMMITTEE

STATISTICS AT A GLANCE
ASPECTWISE POSITION OF STANDARDS
ASPECT OF STANDARD

NUMBER OF STANDARDS

PRODUCT

952

METHODS OF TEST

363

CODES OF PRACTICE

153

TERMINOLOGY

DIMENSIONS

SYMBOLS

OTHERS

TOTAL

1564

CHD 1 INORGANIC CHEMICALS

SCOPE a) To formulate Indian Standards on terminology, methods of
sampling and tests (including general methods) code of practices, and
specification for all inorganic chemicals (except electroplating and
b) Liaison - To co-ordinate with the work of
i) ISO/TC 47 (restricting to
inorganic chemicals)
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

Feb 2010

IS 254:1973

Specification for Magnesium chloride (second

Feb 2010

IS 255:1982

Sodium sulphate, anhydrous (technical grade)

(second revision)

Feb 2011

IS 256:1972

Glauber salt (sodium sulphate, decahydrate),

technical (first revision)

Feb 2011

IS 258:2000

Potash Alum -Specification (first revision)

Feb 2011

IS 259:1969

Ammonium alum (first revision)

Feb 2011

IS 260:2001

Aluminium sulphate, Non-Ferric - Specification

(second revision)

Nov 2007

IS 261:1982

Copper sulphate (second revision)

Feb 2011

IS 262:1982

Specification for Ferrous sulphate, heptahydrate

(second revision)

Feb 2011

IS 264:2005

Nitric acid - Specification (third revision)

IS 265:1993

Hydrochloric acid (fourth revision)

Feb 2010

IS 266:1993

Sulphuric acid (third revision)

Feb 2010

IS 296:1986

Specification for Sodium carbonate, anhydrous

(third revision)

Feb 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 297:2001

Sodium sulphide, Technical - Specification (third

revision)

(first revision)

Feb 2010

IS 505:1995

Light kaolin - Specification (third revision)

Feb 2011

IS 566:1984

Disodium phosphate, dodecahydrate (second

Feb 2010

IS 567:1993

Disodium phosphate, anhydrous (second revision)

Feb 2010

IS 571:2000

Monosodium phosphate - Specification (second

revision)

Feb 2011

IS 573:1992

Trisodium phosphate (fourth revision)

Feb 2010

IS 574:1989

Glassy sodium metaphosphate, technical (fourth

revision)

Feb 2011

IS 593:1978

Specification for Salt for hide-curing (wet salting)

(second revision)

carbons, powdered and granular (second revision)

Feb 2011

IS 879:1981

Sodium nitrite (first revision)

Feb 2011

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 1040:1987

Calcium carbide, technical (third revision)

Feb 2010

IS 1065:1989

Bleaching powder, stable - Specification (second

revision)

hydrated lime (first revision)

Feb 2010

IS 1540(Part 1):1980

Quicklime and hydrated lime for chemical

industries: Part 1 Quick lime (second revision)

Feb 2010

IS 1540(Part 2):1990

Quicklime and hydrated lime for chemical

industries: Part 2 Hydrated lime (third revision)

Feb 2010

IS 1612:1976

Iron powder (reduction grade) (first revision)

Feb 2010

IS 1919:1982

Specification for Sodium hydrosulphite (first

Feb 2011

IS 2080:1980

Specification for Stabilized hydrogen peroxide (first

revision)

Feb 2011

IS 2088:1983

Methods for determination of arsenic (second

Feb 2010

IS 2124:2000

Sodium bicarbonate - Specification (second

Feb 2011

IS 2142:1992

Bromine, technical (second revision)

Feb 2010

IS 2263:1979

Methods of preparation of indicator solutions (first

revision)

Feb 2010

IS 2316:1990

Methods of preparation of standard solutions for

colorimetric and volumetric analysis (second

Nov 2007

IS 2317:1975

Method for gravimetric determination of

sulphates(first revision)

Feb 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 2362:1993

Determination of water by Karl Fischer method Test method (second revision)

Feb 2010

IS 2449:1963

Silver oxide

Feb 2011

IS 2723:1985

Ammonium bromide, pure and analytical reagent

(first revision)

Limestone for chemical industry (first revision)

Feb 2010

IS 3205:1984

Precipitated barium carbonate, technical (first

Feb 2010

IS 3401:1992

Silica gel (third revision)

Feb 2010

IS 3598:1983

Sodium perborate, tetrahydrate (first revision)

Feb 2011

IS 3605:1984

Bauxite for chemicals and petroleum industries

(first revision)

Feb 2010

IS 3607:1979

Magnesite for chemical industry (first revision)

Feb 2010

IS 4016:2002

Density composition Tables for Aqueous solutions

of Sodium Hydroxide - Specification (first

Nov 2007

IS 4048:1989

Density composition tables for aqueous solutions

of sulphuric acid (first revision)

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 4611:1991

Metallic zinc powder (zinc dust) (second revision)

Feb 2010

IS 4730:1994

Methods for determination of density of liquids

(first revision)

Feb 2010

IS 4737:1982

Chromite for chemical industries (first revision)

Feb 2011

IS 5194:1969

Method for determination of nitrogen-Kjeldahl

Feb 2011

IS 5288:1980

Specification for Barium chloride (first revision)

Feb 2010

** IS 5298:1983

Method for determination of distillation range and

of distillation yield (firstrevision)

Feb 2011

IS 5301:1987

Sodium chlorate (first revision)

Nov 2007

IS 5305:1969

Method for volumetric determination of

Feb 2010

IS 5316:1998

Ammonium carbonate - Specification (first

Feb 2010

IS 5321:1969

and magnesium using EDTA (first revision)

Feb 2010

102

IS 6015:1984

Feb 2010

106

IS 6361:1971

Methods of colorimetric determination of phosphorus

Feb 2010

107

IS 6507:1991

Sodium chromate, technical (second revision)

Feb 2010

108

IS 6605:1972

Specification for Potassium chromate

Feb 2010

109

IS 6614:1972

Aluminium chloride, anhydrous, technical

Feb 2011

110

IS 6655:1972

Methods of test for sulphur

Feb 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

111

IS 6831:1992

Feb 2010

115

IS 7130:1994

Chlorosulphonic acid, technical (second revision)

Feb 2011

116

IS 7163:1989

Potassium iodide, pure and analytical reagent (first

revision)

Feb 2010

125

IS 8770:1978

Artificial sea water for laboratory use

Feb 2010

126

IS 8813:1995

Potassium silicate, technical - Specification (first

revision)

Feb 2010

127

IS 8814:1978

Sodium metal

Feb 2010

128

IS 8883(Part 1):2005

Methods of sampling chemical and chemical

products : Part I General requirements and
precautions (First Revision )

129

IS 8883(Part 2/Sec 1):1978

Methods of sampling chemicals and chemical

products: Part 2 Sampling equipment - Sec 1 For

Feb 2010

130

IS 8883(Part 2/Sec 2):1978

Methods of sampling chemicals and chemical

products: Part 2 Sampling equipment - Sec 2 For

Feb 2010

131

IS 8883(Part 2/Sec 3):1978

Methods of sampling chemicals and chemical

products: Part 2 Sampling equipment - Sec 3 For
gases

Feb 2010

132

IS 9189:1979

Method for determination of free chlorine in

chlorinated organic liquid compounds (colorimetric)

Feb 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

139

IS 9700:1991

Activated alumina - Specification (first revision)

Copper nitrate

Feb 2010

151

IS 10896:1984

Aluminium hydroxide, technical

Feb 2010

152

IS 10904:1984

Sodium fluoride, technical

Feb 2010

153

IS 11112:1984

Alumina, chromatographic grade

Feb 2010

154

IS 11123:1984

Method for determination of copper by atomic

absorption spectrophotometry

Feb 2010

155

IS 11124:1984

Method for atomic absorption spectrophotometric

determination of arsenic

Feb 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

156

IS 11153:1996

Manganese dioxide for dry batteries - Specification

(first revision)

Feb 2010

157

IS 11224:1985

Rock phosphate for chemical industries

Feb 2010

158

IS 11236:1985

Manganese acetate

Feb 2010

159

IS 11237:1985

Manganese carbonate

absorption spectrophotometry

Feb 2010

171

IS 12178:1987

Acetylene black

of hydrochloric acid

Feb 2010

178

IS 13057:1991

Potassium iodate

Feb 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

179

IS 13318:1992

Methods for determination of pH (Superseding of
IS 3225 and IS 5741)

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

DOC.CHD 1(1728)

Sodium hypochlorite solution (second revision of

IS 11673)

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 1(1835)

Hydrochloric acid (Fifth revision of IS 265)

DOC.CHD 1(1836)

Caustic Soda, Pure and technical (fourth revison

of IS 252) C2

DOC.CHD 1(1793)

Alumino-Ferric- Specification (Fifth revision of IS

DOC.CHD 1(1840)

Method for determination of distillation range and

Distillation yield (second revision of IS 5298)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

5 Electroplating Chemicals and Photographic Materials

SCOPE To formulate Indian Standards on terminology, methods of sampling
and tests, codes of practice for sampling, packaging, storage and
specifications for electroplating and photographic chemicals,
photographic paper, films, sizes of spools and related materials
Liaison - To co-ordinate with the work of
i) ISO/TC 42 Photography
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 246:1986

Sodium thiosulphate, crystalline, photographic

grade (fourth revision)

Nov 2008

IS 330:1992

Chromium trioxide (second revision)

Nov 2008

IS 388:1999

Hydroquinone, photographic grade - Specification

(third revision)

Jan 2006

IS 500:1999

Potassium metabisulphite, photographic grade Specification (fourth revision)

Jan 2006

IS 557:1988

Sodium acetate, photographic grade (third revision)

Nov 2008

IS 1809:1979

Nickel salts for electroplating (second revision)

Nov 2008

IS 1880:1977

Zinc oxide and zinc salts for electroplating (first

revision)

Nov 2008

IS 2211:1993

Sodium thiosulphate, anhydrous, photographic

grade (third revision)

Jan 2006

IS 2214:1977

Specification for Silver nitrate, pure and analytical

reagent (first revision)

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

IS 6588:1972

Nov 2008

IS 7067:1973

Fluoboric acid and metal fluoborates for

Nov 2008

IS 8281:1976

Method for sensitometry of photographic papers

Nov 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 10396:1982

Nov 2008

IS 10668:1983

Sodium formaldehyde bisulphite, anhydrous,

photographic grade

photographic grade, Hydrochloride

photolettering devices

Nov 2008

IS 12551:1988

Potassium pyrophosphate for electroplating

Nov 2008

IS 12557:1988

Sodium pyrophosphate for electroplating

Nov 2008

IS 12846:1989

Boric acid, photographic grade

Nov 2008

IS 12865:1989

Potassium persulphate, photographic grade

Nov 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

IS 13075:1991

Sizes of rolls of black and white and colour paper

for roll paper printers

Nov 2008

IS 13104:1991

2-Amino-5-[N-ethyl N-2, hydroxy ethyl]

aminotoluene sulphate, Photographic grade (CD-4)

electroplating - specification

Nov 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 6 INDUSTRIAL GASES

SCOPE a) To formulate Indian Standards for terminology; methods of
sampling and test; codes of practice and specifications for industrial
gases including high purity speciality gases and gas mixtures other
b) To liaise with
i) ISO/TC 158 Aanlysis of gases
ii) ISO/TC 197 Hydrogen technologies
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

Argon, compressed and liquid - Specification

(second revision)

Feb 2011

** IS 7062:1973

Glossary of terms used in gas industry

Dec 2006

IS 7278:1993

Methyl chloride- Specification (first revision)

Feb 2011

IS 13490:1992

Code of practice for handling speciality gases

Feb 2011

IS 15578:2005

Code of practice for handling and usage of gas

mixtures

Feb 2011

IS 15583:2005

Compressed Helium gas-Specification

Feb 2011

FINALISED DRAFTS UNDER PRINT

DOC.CHD 6(1473)

Specification for Hydrogen fuel Part 1: All

applications except proton exchange membrane
(PEM) fuel cells for road vehicles

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 6(1710)
/ ISO 6141:2000

Gas analysis - Requirements for certificates for

calibration gases and gas mixtures.

DOC.CHD 6(1711)
/ ISO 6142:2001

Gas analysis - Preparation of calibration gas

mixture - Gravimetric method

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

DOC.CHD 6(1712)
/ ISO 6143:2001

Gas analysis - Comparison methods for

determining and checking the composition of
calibration gas mixtures.

DOC.CHD 6(1714)
/ ISO 6145-1:2003

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
1 : Methods of calibration

DOC.CHD 6(1716)
/ ISO6145-4:2004

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
4 :Continuous syninge injection method.

DOC.CHD 6(1717)
/ ISO 6145-5:2001

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
5 :Capaliary calibration devices.

DOC.CHD 6(1718)
/ ISO 6145-6:2003

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
6 :Critical orifices

DOC.CHD 6(1719)
/ ISO 6145-7:2001

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
7 :Thermal mass-flow controllers

DOC.CHD 6(1721)
/ ISO 6145-9:2001

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
9 : Saturation method

DOC.CHD 6(1722)
/ ISO 6145-10:2002

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
10 :Permeation method

DOC.CHD 6(1725)
/ ISO 16664:2004

Gas analysis - Handling of calibration gases and

gas mixtures - Guidelines

DOC.CHD 6(1713)
/ ISO 6144:2003

Gas analysis - Preparation of calibration gas

mixtures - Static volumetric method

DOC.CHD 6(1715)
/ ISO 6145-2:2001

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
2: Volumetric pumps

DOC.CHD 6(1720)
/ ISO 6145-8:2005

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric method

DOC.CHD 6(1723)
/ ISO 6145-11:2005

Gas analysis - Preparation of calibration gas

mixtures using dynamic volumetric methods - Part
11 Electrochemical generation

DOC.CHD 6(1724)
/ ISO 15796:2005

Gas analysis Investigation and treatment of

analytical bias

DOC.CHD 6(1727)
/ ISO 14912:2003

Gas analysis - Conversion of gas mixture

composition data

DRAFT STANDARDS FORMULATED

DOC.CHD 6(1477)

Carbon dioxide (third revision of IS 307)

DOC.CHD 6(1646)

Chlorofluoro hydrocarbons of the methane and

ethane series (third revison of IS 5610)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 8 OCCUPATIONAL SAFETY & HEALTH AND CHEMICAL HAZARDS

SCOPE a) To formulate Indian Standard on
i) Terminology relating to occupational safety and chemical hazards,
methods of sampling and test, code of practiice for procedures and
specification for safety equipment made of various alternative
materials of construction and occupational safety and health
management system, procedure and practices;
ii) Classification of chemical hazards and hazardous chemicals; and
iii) Code of safety for operational hazards in industries, laboratories
etc; safety data sheets and cards for hazardous chemicals;
b) LIAISON - To co-ordinate with the work of ISO/TC 94 Personal
Safety - Protective Clothing and Equipment and with the work of
international organization dealing with safety in chemical industry.
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 1446:2002

Classification of dangerous goods (second revision)

Feb 2009

IS 3521:1999

Industrial safety belts and harnesses Speciification (third revision)

Feb 2009

IS 3786:1983

Methods for computation of frequency and

severity rates for industrial injuries and
classification of industrial accidents (first revision)

Feb 2009

IS 4155:1966

Glossary of terms relating to chemical and

radiation hazards and hazardous chemicals

Code of safety for bromine

Dec 2003

IS 6954:1973

Code of safety for caustic potash

Feb 2009

Specification for Industrial Safety Gloves: Part 1

Leather and cotton gloves

Feb 2007

tests (first revision)

Feb 2007

IS 7812:1975

Code of safety for mercury

Feb 2009

* IS 8089:1976

Code of safe practice for layout of outside

facilities in an industrial plant

Feb 2007

IS 8091:2008

Industrial Plant Layout - Code of safe practice

(first revision)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 8095:1976

Specification for Accidents prevention tags

Feb 2007

IS 8185:1976

Code of safety for phosgene

Feb 2009

IS 8218(Part 1):1976

practice(first revision)

May 2010

IS 9473:2002

Respiratory protective devices - Filtering half

masks to protect against particles- Specification

Feb 2009

IS 9563:1980

Specification for Carbon monoxide filter self-

Feb 2006

IS 9623:2008

Selection, use and maintenance of respiratory

protective devices - Code of practice (first

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 9679:1980

Code of practice for work environmental monitoring

(air borne contaminants)

for protection of foot and leg

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 12142:1987

Code of safety for 1,1,1 trichloro ethane

Feb 2009

IS 12143:1987

Code of safety for tetrachloroethane

Feb 2009

IS 13293:1992

Gas detector tubes - General requirements and

Methods of test

potassium and sodium

Feb 2007

IS 14138(Part 1):1994

Respiratory protective devices:Threads for

facepieces, Part 1 Standard thread connection-

Feb 2009

IS 14138(Part 2):1994

Respiratory Protective devices: Threads for

facepieces Part 2 Centre thread connection -

Feb 2009

IS 14165:1995

Handling of carcinogenic substances - Code of

Feb 2007

IS 14166:1994

Respiratory protective devices : Full face masks Specification

Feb 2009

IS 14170:1994

Respiratory protective devices : Mouthpiece

assemblies - Specification

Feb 2009

IS 14200:1994

Hydrogen peroxide - Code of safety

Feb 2006

100

* IS 14489:1998

Code of practice on occupational safety and health

audit

IS 15323:2003

Gas filters and combined filters used in respiratory

protective equipment - Specification

Feb 2009

116

IS 15465:2004
/ ISO 10156

Gases and gas mixtures-Determinatin of fire

potential and oxidizing ability for the selection of
cylinder valve outlets

May 2010

117

IS 15548:2005

Hydrofluorocarbon (HFC-134a) - Code of Safety

118

IS 15656:2006

Hazard identification and risk analysis-Code of

119

IS 15738:2007

Stable Bleaching Powder - Code of Safety

120

IS 15793:2007

Managing environment, occupational health and

safety legal compliance - Requirements of good

121

IS 15803:2008

Respiratory protective devices -Self contained

closed circuit breathing apparatus chemical oxygen
(KO2) type, self generating, self rescuers -

122

IS 15809:2008

High visibility warning clothes-Specification

123

IS 18001:2007

Occupational health and safety management

system - Requirements with guidance for use(first

FINALISED DRAFTS UNDER PRINT

DOC.chD 8(1824)

Amendment no. 1 to IS 7524 (Pt 1):1980

DOC.CHD 8(1581)

Amendment No. 2 to IS 13441

DOC.CHD 8(1669)

Code of safety in Chemical laboratories (second

revision of IS 4209)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 8(1771)

Amendment No. 1 to IS 15402

DOC.CHD 8(1823)

Code of Safety in Radiochemical Laboratory (First

Revision of IS 4906)

DOC.CHD 8(1536)

Occupational safety and health audit - Code of

practice

DOC.CHD 8(1539)

Swimming pool for public - Code of safety

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 9 CERAMICWARE
SCOPE
a) To formulate Indian Standards for terminology, methods of
sampling and test; and specification for:
I) Ceramic Raw Materials;
ii) Whiteware (excluding porcelain insulators, sanitaryware, tiles, salt
glazed pipes & fittings; and ceramic laboratorywares;
iii) Basic Materials for Technical Ceramics, and
iv) Ceramic Coated Metal ware (excluding wares used in hospitals).
b) LIAISON
i) ISO/TC 107 Metallic and other Inorganic Coatings;
ii) ISO/TC 166 Ceramicware, Glassware
and Glass Ceramicware in contact
with Food.
iii) ISO/TC 206 Fine Ceramics
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 2333:1992

Jan 2009

IS 2839:1964

Industrial stoneware

Jan 2009

IS 2840:2002

China clay for ceramic industry -Specification

(second revision)

Jan 2008

IS 2857:2002

Earthenware crockeryware -Specification (third

revision)

Jan 2008

IS 3149:1994

Enamelware for home use (second revision)

Nov 2010

IS 3505:2002

Porcelain crockeryware-Specification (third

Jan 2008

IS 3972(Part 1/Sec 1):1982

| ISO 2723:1995

Methods of test for vitreous enamelware: Part 1

Production of specimens for testing, Section 1
Enamelled sheet steel (first revision)

Nov 2010

IS 3972(Part 1/Sec 2):1982

| ISO 2724:1973

Methods of test for vitreous enamelware: Part 1

Production of specimens for testing, Section 2
Enamelled cast iron (first revision)

Nov 2010

IS 3972(Part 2/Sec 1):1985

Methods of test for vitreous enamelware: Part 2

Test methods, Section 1 Resistance to citric acid
at room temperature and boiling temperature (first

Jul 2006

IS 3972(Part 2/Sec 2):1985

Methods of test for vitreous enamelware: Part 2

Test methods, Section 2 Low and high voltage
tests for detecting and locating defects (first

Jul 2006

IS 3972(Part 2/Sec 3):1988

| ISO 2744:1998

Methods of test for vitreous enamelware : Part 2

Test methods, Section 3 Resistance to boiling
water and water vapour (first revision)

Nov 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 3972(Part 2/Sec 4):1988

| ISO 2747:1998

Methods of test for vitreous enamelware : Part 2

Test methods, Section 4 Resistance to thermal
shock (first revision)

Nov 2010

IS 3972(Part 2/Sec 5):1988

| ISO 2745:1998

Methods of test for vitreous enamelware : Part 2

Test methods, Section 5 Resistance to hot alkali
(sodium hydroxide) (first revision)

Nov 2010

IS 3972(Part 2/Sec 6):1988

Methods of test for vitreous enamelware : Part 2

Test methods, Section 6 Reflectance and specular
gloss (first revision)

Nov 2010

IS 3972(Part 2/Sec 7):1990

| ISO2743:1986

Methods of test for vitreous enamelware: Part 2

Test methods, Section 7 Resistance to boiling
hydrochloric acid (first revision)

Jul 2006

IS 3972(Part 2/Sec 8):1990

| ISO 4530:1983

Methods of test for vitreous enamelware: Part 2

Test methods, Section 8 Resistance to heat (first

Jul 2006

IS 3972(Part 2/Sec 9):1991

| ISO 8290:1998

Methods of test for vitreous enamelware: Part 2

Test methods, Section 9 Resistance to dilute
sulphuric acid (first revision)

Nov 2010

IS 3972(Part 2/Sec 11):1995

Methods of test for vitreous enamelware: Part 2

Test method, Section 11 Resistance to abrasion
(first revision)

Jul 2006

IS 3972(Part 2/Sec 12):1999

Methods of test for vitreous enamelware: Part 2

Test methods, Section 12 Resistance to torsion
(first revision)

Nov 2010

IS 3972(Part 2/Sec 13):2007

Methods of test for vitreous enamelware: Part 2

Test methods, Section 13 Resistance to warpage
(first revision )

IS 3972(Part 2/Sec 14):2007

Methods of test for vitreous enamelware: Part 2

Test methods, Section 14 Resistance to
adherence (first revision )

IS 4589:2002

Plastic clay and washed plastic clay for ceramic

industry -Specification (third revision)

Jan 2008

IS 6988:2002

Fine (Bone)china crockeryware -Specification (

second revision)

Jan 2008

IS 7087:1979

Ceramic tower packings (first revision)

Jul 2006

** IS 7402:1986

Filters for drinking water purposes (first revision)

Jan 2009

IS 7775:1975

Ceramic grinding media and lining

Nov 2010

IS 8017:1988

Vitreous enamelled reflectors for use with

illuminating device (first revision)

Nov 2010

IS 8687(Part 1):1977

Methods of test for vitreous enamels and frits:

Part 1 Sieve analysis

Jul 2006

IS 8687(Part 2):1977

Methods of test for vitreous enamels and frits:

Part 2 Fusion flow test

Jul 2006

IS 8709:1977

Method of test for colour retention of vitreous

enamel coatings

Jul 2006

IS 9749:2007

Potash feldspar and soda feldspar for glass and

ceramic industry (first revision )

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 9806:2001

Method of test for and permissible limits of toxic

materials released from ceramicware, vitreous
enamelware, glassware and glass ceramicware in
contact with food (first revision)

Jul 2006

** IS 10429:1982

Powdered talc for ceramic industry

Jul 2006

** IS 11464:1985

Quartz for ceramic industry

Jul 2006

IS 11475:2002

Stoneware crockeryware -Specification ( second

revision)

glass industry

Jul 2006

IS 13273:1991

Vitreous enamelled inner tanks for storage water

heater

Jan 2009

IS 14179:1999

Methods of test for ceramic tableware

Nov 2010

IS 14705:1999

Vitreous china crockeryware - Specification

Nov 2010

IS 14721:1999

Zinc oxide for ceramic industry - Specification

Nov 2010

IS 15751:2007

Calcite for Ceramic Industry - Specification

IS 15752:2007

Sericite for Ceramic Industry - Specification

FINALISED DRAFTS UNDER PRINT

DOC.CHD 9(1681)

Ceramic water filter candles - Specification

(second revision of IS 7402)

DOC.CHD 9(1682)

Powdered talc for ceramic industry - Specification

(first revision of IS 10429)

DOC.CHD 9(1683)

Quartz for ceramic industry - Specification (first

revision of IS 11464)

DOC.CHD 9(1684)

Pyrophyllite for ceramic industry - Specification

(first revision of IS 11477)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 10 GLASS, GLASSWARE AND LABORATORYWARE

SCOPE To formulate Indian Standards for terminology, code of practice,
methods of sampling and tests and specificaitons for glass including,
its raw material, glassware, laboratoryware including themometer
,hydrometers (made from glass, plastics, ceremic, silica etc) not
covered by scopes and of other Sectional Committee.
Liaison - To co-ordinate with the work of
I) ISO/TC 22/SC11 Road
vehicles/Safety glazing materials
ii) ISO/TC 48 Quality of glassware;
iii) ISO/TC 63 Glass containers
i v) ISO/TC 160 Glass in building
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 488:1980

Glass making sands (second revision)

IS 878:2008
/ ISO 4788:2005

Laboratory Glassware- Graduated measuring

cylinders (second revision)

One-mark volumetric flasks (second revision)

IS 915:2006
| ISO 1042:1998
IS 997:1973

Dec 2008

Limestone and dolomite for glass and ceramic

inndustry (first revision)

Dec 2008

IS 1106:1986

Distilled water glass bottles (first revision)

Aug 2007

IS 1107:1986

Aerated water glass bottles, crown finish type

(second revision)

Aug 2007

IS 1112(Part 1):1989

Glass shells for general lighting service lamps :

Part 1 - 54 to 80 mm shell diameter (second

Dec 2006

IS 1112(Part 2):1989

Glass shells for general lighting service lamps :

Part 2 - 81 to 130 mm shell diameter (second

Dec 2006

IS 1116:1994

Glass globes for hurricane lanterns (first revision)

Sep 2010

IS 1117:1975
| ISO 648:1977
IS 1381(Part 1):2003
/ ISO 1773:1997

One-mark pipettes (first revision)

Aug 2007

Laboratory Glassware - Narrow-Necked Boiling

Flasks (Second Revision)

Dec 2008

IS 1381(Part 2):2008
/ ISO 4797:2004

Laboratory Glassware - Boiling flasks with conical

ground joints (second revision)

10
11
12
13

IS 1382:1981

Glossary of terms relating to glass and glassware

(first revision)

Dec 2008

IS 1388(Part 1):2005
/ ISO 4796-1:2000

Laboratory glassware- Bottles Part 1 Screw-neck

bottles (second revision )

Feb 2011

IS 1388(Part 2):2005
/ ISO 4796-2:2000

Laboratory glassware- Bottles Part 2 : Conical

neck bottles (second revision)

Feb 2011

IS 1388(Part 3):2005
/ ISO 4796-3:2000

Laboratory glassware- Bottles Part 3 : Aspirator

bottles (second revision)

Feb 2011

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 1392:1999

Glass milk bottles - Specification (fourth revision)

Dec 2008

IS 1541:2006

Glass filter funnels ( second revision)

IS 1574:1980

Glass weighing bottles (first revision)

Aug 2007

IS 1575:2003
/ ISO 4800:1998

Laboratory glassware - Separating funnels and

dropping funnels (second revision)

Laboratory Glassware - Straight-Bore glass

stopcocks for general purposes (first revision)

Dec 2008

IS 1997:2008
/ ISO 385:2005
IS 2091:1983

Laboratory Glassware- Burettes (third revision)

Multi-trip glass beer bottles (second revision)

Dec 2008

IS 2303(Part 1/Sec 1):1994

| ISO 719:1985

Grading glass alkalinity: Part 1 Hydrolytic ,

ressistance,Sec 1 Hydrolytic resistance of glass
grains at 98 deg C - Method of test and
classification (first revision)

railway uses (third revision)

Dec 2006

IS 2618:2006
| ISO 4142 :2002

Glass test tube ( second revision)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

39
40

IS 2619:1993
| ISO 3819:1985
IS 2620:1963

Glass beakers (second revision)

Aug 2007

Porcelain crucibles and basins: Part 2 Basins (first

revision)

Aug 2007

IS 3104(Part 1):1982
| ISO 649-1:1981

Density hydrometers: Part I Requirements (first

revision)

Dec 2008

IS 3104(Part 2):1982
| ISO 649-2:1981

Density hydrometers:Part 2 Methods of test and

use (first revision)

Dec 2008

Clay pipe triangles

Aug 2007

Silvered glass mirrors for general purposes specification (second revision)

Dec 2006

IS 3432:1965

** IS 3438:1994

IS 3608(Part 1):1987

Glass alcoholometers: Part 1 Glass alcoholometers

without thermometers (first revision)

Aug 2007

IS 3608(Part 2):1987

Glass alcoholometers: Part 2 Glass alcoholometers

with thermometer (first revision)

(first revision)

Aug 2002

** IS 4162(Part 2):1985
| ISO 835-2:1981

Graduated pipettes: Part 2 Pipettes for which no

waiting time is specified (first revision)

Aug 2002

** IS 4162(Part 3):1985
| ISO 835-3:1981

Graduated pipettes: Part 3 Pipettes for which a

waiting time of 15 s is specified (first revision)

Aug 2002

** IS 4162(Part 4):1985
| ISO 835-4:1981

Graduated pipettes: Part 4 Blow-out pipettes (first

revision)

Aug 2002

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 4426:1992

Methods of sampling laboratory glassware (first

revision)

Aug 2007

IS 4610:1968

Glass tubes for general purpose and reference

thermometers

Dec 2006

IS 4825:1982

Liquid-in-glass solid-stem reference thermometers

(first revision)

Dec 2008

IS 5009:1968

Buchner funnels

Aug 2007

IS 5011:1968

Gooch crucibles

Aug 2007

IS 5081:1990

Glass tubes for tubular fluorescent lamps for

general lighting services lamps (first revision)

Dec 2006

Interchangeable conical ground-glass joints

Dec 2006

IS 5165:1969
| ISO 383:1976
IS 5168:1969

Glass feeding bottles

Aug 2007

IS 5437:1994

Figured rolled and wired glass (First revision)

Sep 2010

IS 5623:1999
| ISO 7991:1987

Method for determination of coefficient of linear

thermal expansion of glass (first revision)

Sep 2010

IS 5681:1992

General meteorological thermometers, liquid-inglass (second revision)

Aug 2007

IS 5715:1986

Glass carboys (first revision)

Aug 2007

IS 5717:2003
/ ISO 3507:1999

Laboratory Glassware - Pyknometers (Second

Revision)

Dec 2008

IS 5725:1970

Psychrometers, unventilated (dry and wet bulb

hygrometers)

Dec 2006

IS 5870:1970

Glass globes for internal lighting of passenger

Aug 2007

IS 5984:1999

Glass shells for miniature lamps - Specification

(first revision)

Sep 2010

IS 6017:1971

Thermometer for whirling psychrometers

Aug 2007

Glass condensers (first revision)

Sep 2010

IS 6052:1988
| ISO 4799:1978
IS 6128:1971

Desiccators

Aug 2007

IS 6154:1971

Perforated plates for desiccators

Aug 2007

IS 6274:1971

Method of calibrating liquid-in-glass thermometers

Aug 2007

IS 6500:1972

Thermometers for measurement of sea surface

temperatures

Aug 2007

IS 6506:1972

Methods for thermal shock tests on glassware

Sep 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 6592:1972

Soil thermometers

Aug 2007

IS 6654:1992

Glossary of terms relating to glass containers

(second revision)

Dec 2008

IS 6917:1973

Glass lenses for automobile headlights (replaceable

bulb type)

Dec 2008

IS 6945:1973

Code of practice for packaging glass and

Dec 2008

IS 6981:1992

Glass jars for air-depolarized primary (caustic

soda) wet cells (first revision)

Dec 2008

IS 7000:1973

General purpose maximum-minimum thermometers

Aug 2007

IS 7324:1983

Brix hydrometers (first revision)

Dec 2006

IS 7374:1974

Glass rods and tubing for laboratory glassware

Sep 2010

IS 7511(Part 1):1992

Dimensions for neck finishes: Part 1 Shallow

continuous thread finish (R3) (second revision)

Dec 2008

IS 7511(Part 2):1986

Part 2 Shallow continuous thread finish for deep

screw caps (R 3/D) (first revision)

Aug 2007

IS 7511(Part 3):1986

Part 3 Roll-on thread non-pilfer-proof (RONPP)

(first revision)

Aug 2007

IS 7511(Part 4):1986

Part 4 Roll-on sealed threads pilfer-proof (first

Aug 2007

IS 7511(Part 5):1986

Part 5 Vial goldie seal glass finishes (first revision)

Aug 2007

IS 7511(Part 6):1986

plastic cap

Aug 2007

103

IS 7708:1975

Vacuum flasks

Dec 2008

Piston operated volumetric apparatus- Part 7: Non

-gravimetric methods for the assessment of
equipment performance

Feb 2011

104

IS 8655(Part 7):2005
/ ISO 8655-7

105

IS 8697:1977

Code of practice for export packaging of glass

containers ware

Dec 2008

106

IS 8728:1977

Adjustable range thermometers

Dec 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

107

IS 8729:1977
| ISO 384:1978

Principles of construction and adjustment of

Glass bottles for tomato ketchup (first revision)

Dec 2008

117

IS 9781:1989

Glass jar for jams, jellies and marmalades (first

revision)

Dec 2006

118

IS 10072:1982
| ISO 7056:1981
IS 10073:1982
| ISO 6706:1981
IS 10133:1982

Plastics beakers

123

IS 10516:1983

Methods of test for internal pressure resistance for

glass containers

Dec 2008

124

** IS 10640:1983

Soxhlet extractors

Aug 2007

125

Dec 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

130

IS 11984:1986

Glass bottles for free flowing liquids

Aug 2007

131

IS 11985:1987

Glass jars for pickles

Dec 2008

132

IS 11990:1986

Gas washing bottle

Aug 2007

133

IS 12244(Part 1):1988

Colorimeter thermometers: Part 1 Solid-stem

thermometers

Dec 2008

134

IS 12244(Part 2):1988

Colorimeter thermometers: Part 2 Enclosed scale

thermometers

Dec 2008

135

IS 12255:1988

Baume hydrometers

Dec 2008

136

IS 12305:1988
| ISO 4793:1980

Laboratory sintered (fritted) filters, porosity

grading, classification and designation

Feb 2011

137

IS 12580(Part 1):1989

Methods for determination of viscosity and

viscometric fixed points of glass: Part 3
Determination of annealing and strain point by

Dec 2008

144

IS 12950:1990

Battery hydrometer portable syringe type for leadacid batteries

Aug 2007

145

IS 13650:1993

Glass containers for proteinized food

Aug 2007

146

IS 14837:2000
| ISO 1772:1975
IS 14838:2000

Laboratoryware - Silica crucible - Specification

Feb 2011

Laboratoryware - Plastics wash bottles -

Sep 2010

148

IS 14868:2000
| ISO 641:1975

Laboratoryware - Interchangeable spherical ground

glass joints - Specification

Feb 2011

149

IS 14900:2000

Transparent float glass - Specification

Sep 2010

150

IS 24450:2005
/ ISO 24450:2005

Laboratory glassware - Wide-necked boiling flasks

Feb 2011

147

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

FINALISED DRAFTS UNDER PRINT

DOC.CHD 10(1672)

Laboratory glassware- Graduated pipettes(Adoption

of ISO 835:2007)

DOC.CHD 10(1708)

Soxhlet extractors - Specification (first revision of

10640)

DOC.CHD 10(1775)
/ IS/ISO 641-1975 (E)

Laboratory glassware-Interchangeable spherical

ground joints

DOC.CHD 10(1777)
/ IS/ISO 718-1990 (E)

Laboratory glassware- Thermal shock and thermal

shock endurance-Test methods

DOC.CHD 10(1778)
/ IS/ISO 719-1985 (E)

Glass- Hydrolytic resistance of glass grains at

98oC - Method of test and classification

DOC.CHD 10(1779)
/ IS/ISO 720-1985 (E)

Glass- Hydrolytic resistance of glass grains at

121oC Method of test and classification

DOC.CHD 10(1780)
/ IS/ISO 1042-1998 (E)
DOC.CHD 10(1781)
/ IS/ISO 1769-1975 (E)
DOC.CHD 10(1785)
/ IS/ISO 4803-1978(E)
DOC.CHD 10(1786)
/ IS/ISO 7991:1987(E)

Laboratory glassware- One mark volumetric flasks

DOC.CHD 10(1796)
/ IS/ISO 24998-2008(E)

Plastic Laboratoryware - single use Petri dishes for

microbiological procedures

DOC.CHD 10(1816)
/ ISO 4787

Laboratory glassware-volumetric instrumentsMethod of testing of capacity and for use

8
9
10

Laboratory glassware- Pipettes- Colour coding

Laboratory glassware- Borosilicate glass tubing
Glass-Determination of coefficient of mean linear
thermal expansion

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

DOC.CHD 10(1773)
/ ISO 383-1976 (E)]

Laboratory glassware-Interchangeable conical

ground joints

DOC.CHD 10(1776)
Laboratory glassware- One mark pipettes (C1)
/ IS/ISO 648-1977 (E)
3
DOC.CHD 10(1784)
Laboratory glassware- Condensers
/ IS/ISO 4799-1978 (E)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1

DOC.CHD 10(1782)
/ IS/ISO 4793-1980 (E)

Laboratory sintered (fritted)filters- Porosity

grading, classification and designation

DOC.CHD 10(1783)
/ IS/ISO 4794-1982 (E)

Laboratory glassware- Methods for assessing the

chemical resistance of enamels used for colour
coading and colour marking

DOC.CHD 10(1844)
/ ISO 718

Laboratory glassware0 Thermal shock and thermal

shock endurance- Test Method

DOC.CHD 10(1845)
/ ISO 719

Glass - Hydrolytic resistance of glass grains at

98oC - Method of test and classification

DOC.CHD 10(1846)
/ ISO 720

Glass - Hydrolytic resistance of glass grains at

121oC - Method of test and classification

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

6
7
8

DOC.chD 10(1847)
/ ISO 4142
DOC.CHD 10(1848)
/ ISO 4803
DOC.CHD 10(1849)
/ ISO 7991

Laboratory glassware - Test tubes

Laboratory glassware Borosilicate glass
Glass -- Determination of coefficient of mean
linear thermal Expansion

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

tubing

CHD 13 Water Quality for Industrial Purposes

SCOPE To formulate Indian Standards for terminology, quality criteria for water
for industrial purposes, guidelines for treatment of water, boiler feed
water, boiler water, cooling water, deposits on water-side, boiler water
treatment compounds, cleaning of boilers, corrosion prevention,
specifications for chemicals for use in high pressure boilers,
condensate polishing and other issues related to boiler water chemistry.
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 201:1992

Quality tolerances for water for textile industry

(second revision)

Mar 2008

Quality Tolerances for Water for

Storage Batteries - Specification (second revision)

Mar 2008

* IS 1069:1993

IS 1070:1992

Apr 1999

IS 2725:1964

Quality tolerances for water for rayonmanufacturing industry

Jun 2006

IS 2859:1977

Code of practice for treatment of water for

locomotive boilers (first revision)

Mar 2008

IS 3328:1993

Quality tolerances for water for swimming pools

(first revision)

Mar 2008

IS 4221:1967

Quality tolerances for water for tanning industry

Jun 2006

IS 4343:1983

Code of practice for treatment of water for high

pressure boilers (first revision)

Mar 2008

IS 4700:1968

Quality tolerances for water for fermentation

Jun 2006

IS 7932:1982

Specification for Boiler water treatment compounds

(first revision)

Mar 2008

IS 8188:1999

Treatment of water for cooling towers - Code of

practice (first revision)

IS 8914:1988

Quality tolerances for water for vitreous enamel

industry (first revision)

Jun 2006

** IS 10391:1982

Code of practice for chemical cleaning of boilers

Mar 1994

** IS 10392:1982

Specification for feed water and boiler water for low

and medium pressure boilers

Mar 1994

** IS 10496:1983

Specification for feed water, boiler water and

condensate for high pressure boilers

Mar 1994

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 11671:1985

Glossary of terms relating to boiler water

Mar 2008

IS 11970:1987

supply - chemical process

Jun 2006

IS 13119:1991

Ammonium bifluoride

Mar 2008

IS 13268:1992

Mar 2008

IS 14199:1995

Steam purity - Methods of sampling

Jun 2006

IS 15573:2005

Polyaluminium Chloride

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 13(1762)

Quality Tolerances for Water for Storage Batteries

Specification (Third Revision of IS 1069)

DOC.CHD 13(1764)

Quality Tolerances for Water for Pulp and Paper

Industry (first revision of IS 2724)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 14 PRINTING INKS, STATIONERY AND ALLIED PRODUCTS

SCOPE To formulate Indian Standards for terminology, codes of practice and
guidelines, method of sampling and test and specifications for printing
inks (excluding their raw-materials) and stationery items such as pens,
pencils, inks, refills, correcting fluids, chalks and crayons, artists
colours, carbon and other copying papers, stencil papers and other
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 220:1988

Fountain pen ink ferro-gallo tannate 0.1 percent

iron content -Specification(third revision)

May 2010

IS 393:1985

Ink, stamp-pad (third revision)

May 2010

IS 394:1985

Specification for Ink, cloth marking (second

May 2010

IS 788:1971

Specification for Ink, drawing, waterproof, coloured

(first revision)

May 2010

IS 789:1971

May 2010

IS 1379:1985

Specification for ink marking for non-porous

surfaces (with or without stencil plates) (first

May 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 3707:1984

Refill, ball point pen (second revision)

May 2010

IS 4174:1977

Specification for Typewriter ribbons, cotton (first

revision)

May 2010

IS 4175:1981

Correcting fluid (first revision)

May 2010

IS 4222:1967

Coloured chalks, moulded

May 2010

IS 4395:1987

Glossary of terms relating to inks and allied

industries (first revision)

Methods of test for printing inks

Jan 2008

IS 7771:2004

Letter press halftone ink, black -Specification(first

revision)

** INDICATES STANDARDS TO BE REVISED

Indelible ink

May 2010

IS 13299:1992

Balls for ball point pen reffils -Specification

May 2010

IS 13347:1992

Clutch pencils

May 2010

** IS 14163:1995

Web offset ink, black - Specification

Jan 2008

IS 15495:2004

Printing Ink for Food Packaging - Code of

May 2010

IS 15520:2004
/ ISO 12040

Graphic technology - Paints and printing inks Assessment of light fastness using filtered xenon
arc light

May 2010

IS 15521:2004
/ ISO 12634

Graphic technology - Determination of tack of

paste inks and vehicles by a rotary tackmeter

May 2010

IS 15522:2004
/ ISO 12644

Graphic technology - Determination of Rheological

properties of paste inks and vehicles by the
falling rod viscometer

May 2010

IS 15864:2009

Multicolour process offset printing inks -

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 15 PAPER AND ITS PRODUCTS

SCOPE a) To formulate Indian Standards for
i) Terminology, methods of sampling and test, codes of practice and
specifications for pulp, paper and paper board including raw material for
paper (excluding linters)
ii) Paper sizes and grammage, sizes of periodical and paper stationery
material
iii) Paper and pulp based packaging materials ( converted and treated)
including cartons, sacks, bags and boxes, made of paper board and
packages, made of foil and film materials and lamination there of.
b) LIAISON - To co-ordinate with the work of ISO/TC 6 Paper
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 1060(Part 1):1966

Methods of sampling and test for paper and allied

products: Part 1(revised)

Jan 2009

IS 1060(Part 2):1960

Methods of sampling and test for paper and allied

products: Part 2

Jan 2009

IS 1060(Part 3):1969

Methods of sampling and test for paper and allied

products: Part 3

Jan 2009

IS 1064:1980

IS 2991:1988

Base paper for waxed paper (first revision)

Mar 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 3064:1986

Hand made drawing paper (first revision)

Sep 2010

IS 3263:1981

Waxed paper for confectionery (first revision)

Jan 2009

IS 3302:1986

Backing sheet for stencil (first revision)

Jan 2009

IS 3303:1997

Match paper for match box - Specification (second

revision)

Mar 2008

IS 3413:2004

Base paper for carbon paper - Specification

(second revision)

Jan 2009

IS 3673:1986

Alkali resistant paper (first revision)

Sep 2010

IS 3962:1967

Sizes of folders and files

Mar 2008

IS 6211:1993

Code of practice for packaging of paper and board

(first revision)

Jan 2009

IS 6213(Part 1):1971

Methods of test for pulp: Part 1 Water solubility of

Jan 2009

IS 6213(Part 2):1971

Methods of test for pulp: Part 2 Determination of

freeness of pulp

Jan 2009

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

Jan 2009

Methods of test for pulp: Part 15 Determination of

manganese

Jan 2009

Methods of test for pulp: Part 16 Dirt count

Jan 2009

containers

Mar 2008

IS 6615:1972

General purpose packing/wrapping paper

Jan 2009

IS 6622:1972

Grease proof paper

Jan 2009

IS 6671:1987

Specification for germination paper (first revision)

Mar 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 6715:1972

Master cartons for export of frozen sea foods and

frog legs

Jan 2009

IS 6956:2001

Cover paper - Specification (first revision)

Nov 2006

IS 7063(Part 1):1973
| ISO 3034:1975

Methods of test for corrugated fibreboard : Part 1

Thickness of board

Jan 2009

IS 7063(Part 2):1976

Methods of test for corrugated fibreboard: Part 2

Edgewise crush resistance of board

Mar 2008

IS 7063(Part 3):1976
| ISO 3038:1975

Methods of test for corrugated fibreboard : Part 3

Water resistance of glued bond by immersion

Mar 2008

IS 7063(Part 4):1976
| ISO 3039:1975

Methods of test for corrugated fibreboard : Part 4

Determination of substance of the component
papers after separation

Mar 2008

IS 7149:1973

Fibreboard boxes for canned sea foods for export

Jan 2009

IS 7151:1991

Corrugated fibreboard boxes for para-dropping of

supplies (first revision)

Mar 2008

IS 7161:1973

Vegetable parchment or grease proof

paper/aluminium foil laminate for wrapping butter

Jan 2009

IS 7162:1973

Waxed cartons for packaging of ice cream

Jan 2009

IS 7186:1973

Glossary of terms relating to paper and flexible

packaging

Corrugated fibreboard boxes for the export

packaging of glass jars and bottles filled with

Jan 2009

IS 9493:1980

Cartons for non-soapy detergents

Jan 2009

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

IS 10380:1982

Methods of test for printing ink permeation of

paper (castor oil test)

Sep 2010

IS 10405:1982

Black centered board

Jan 2009

IS 10528:1983

Method of sampling empty paper sacks for testing

Jan 2009

IS 11052:1984

Methods of test for vertical impact drop test on

paper sacks

Mar 2008

Corrugated fibreboard boxes for transport

packaging of apples

Jan 2009

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

108

IS 12212:1987

Corrugated fibreboard boxes for transport

packaging of butter packed in primarycartons

Jan 2009

109

IS 12490:1988

Glassine paper

revision)

Sep 2010

120

IS 13975:1994

Axial (end to end) compression strength of

composite cans, tubes and cores - Method of test

Mar 2008

121

IS 13976:1994

Method of end blow-off pressure test for

composite cans

Mar 2008

122

IS 14319:1995

Laminated paper board pack for vanaspati Specification

Jan 2009

123

IS 14490:1997

Plain copier paper - Specification

Sep 2010

124

IS 14619:1998

Release base paper - Specification

Mar 2008

125

IS 14661:1999

Toilet paper - Specification

Sep 2010

126

IS 14915:2001

Filter paper - Qualitative, hand made -

Nov 2006

127

IS 15307:2003

Post Card-Specification

Jan 2009

128

IS 15576:2005

Multiwall paper sacks for tea for export

Sep 2010

FINALISED DRAFTS UNDER PRINT

DOC.CHD 15(1704)
/ ISO 5631:2000

Paper and board- Determination of colour (C/2)Diffuse refelctance method

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

DOC.CHD 15(1705)
/ ISO 5636:2000

Paper and boar- Dtermination of air permeance

(Medium range)-part-3: Bendtsen methodd

DOC.CHD 15(1706)
/ ISO 8254-1:1999

Paper and board-Measurment of specular glosspart1:75 gloss with a converging beam, Tappi

DOC.CHD 15(1707)
/ ISO 11476:2000

paper and board-Determinaton of CIE whiteness,

C/2 (Indoor illumination conditions)

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 15(1703)
/ ISO 2471:2008

Paper and board - Determination of opacity(paper

backing)- Diffuse reflectance method

DOC.CHD 15(1787)

Specification for ticket board (second revision of

IS 2483)

DOC.CHD 15(1788)

Specification for Coated paper and board (Art and

Chromo) (Second Revision of IS 4658)

DOC.CHD 15(1789)

Method of test for pulp -Part XII/Section 1

Determination of calcium content (first revision of
IS 6213(Part XII)

DOC.CHD 15(1790)

Method of test for pulp -Part XIII/Section 1

Determination of copper content (first revision of
IS 6213(Part XIII)

DOC.CHD 15(1791)

Method of test for pulp -Part XIV/Section 1

Determination of iron content (first revision of IS
6213(Part XIV)

DOC.CHD 15(1792)

Method of test for pulp -Part XV/Section 1

Determination of manganese content (first
revision of IS 6213(Part XV)

DOC.CHD 15(1814)
/ ISO 2470-1:2009

Paper,board and pulps- Measurement of Diffuse

blue reflectance factor- Part 1: Indoor daylight
conditions (ISO Brightness)

DOC.CHD 15(1815)
/ ISO 2470-2:2008

Paper,board and pulps- Measurement of Diffuse

blue reflectance factor- Part 2: Outdoor daylight
conditions (D65 Brightness)

DOC.CHD 15(1817)
/ ISO 777:2005

Paper,board and pulps -Part XII/Section 2

Determination of acid soluble calcium

DOC.CHD 15(1818)
/ ISO 778:2005

Paper,board and pulps -Part XIII/Section 2

Determination of acid soluble copper

DOC.CHD 15(1819)
/ ISO 779:2005

Paper,board and pulps -Part XIV/Section 2

Determination of acid soluble iron

DOC.CHD 15(1820)
/ ISO 1830:2005

Paper,board and pulps -Part XV/Section 2

Determination of acid soluble manganese

DOC.CHD 15(1821)

Specification for general purpose packing/wrapping

paper (first revision of IS 6615)

DOC.CHD 15(1857)

Specification for Paper Stationery Items for

schools(First revision of IS 5195)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 17 LEATHER, TANNING MATERIALS AND ALLIED PRODUCTS

SCOPE To formulate Indian Standards for terminology, methods of sampling
and test, codes of practice, and specifications for leather, leather
products (excluding leather footwear, transmission beltings, textile
items, sports goods and gaskets), tanning materials and allied
products, leather machinery, tools and equipments for leather and
leather goods industry (other than shoe makers hand tools and
equipment) and physical assessment and grading of hides and skins.
b) To coordinate with the work of ISO/TC 120 Leather,
ISO/TC/120/SC1 Raw hides and skins including pickled pelts, ISO/TC
120/ SC2 Tanned leather, ISO/TC120/SC3 Leather products .
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 575:1956

Chrome Belt Lace Leather

Nov 2006

IS 576:1989

Leather - Glazed kid for shoe uppers (second

Nov 2006

IS 577:1986

Specification for Upholstery leather (first revision)

Feb 2009

IS 578:1985

Specification for Full-chrome upper leather (third

revision)

Feb 2009

IS 579:1996

Vegetable tanned sole leather - Specification (third

revision)

Jan 2002

IS 580:1973

Specification for Harness leather (second revision)

Feb 2009

IS 581:1976

Specification for Vegetable tanned hydraulic

leather (second revision)

Feb 2009

IS 582:1970

Feb 2009

IS 1640:2007

Glossary of terms relating to hides, skins and

leather

IS 2573:1986

Specification for Leather gauntlets and mittens

(second revision)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

Specification for Leather for rugby ball (first

Nov 2006

* IS 3999:1966

Specification for Casein based aqueous pigment

and finishes

Feb 2005

IS 4102:1983

Specification for Leather for shuttlecock caps (first

revision)

Specification for BABUL bark

Mar 2001

* IS 5128:1969

Specification for AVARAM bark

Mar 2001

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

* IS 5465:1969

Specification for SONALI bark

Mar 2001

* IS 5466:1969

Methods of test for Vegetable tanning materials,

Mar 2001

IS 5570:1987

Specification for Pickled Goat skins (first revision)

Feb 2009

IS 5597:1970

Specification for Wattle extract

Mar 2001

* IS 6301:1971

Specification for Basic chromium sulphate (for

Mar 2001

IS 6351:1971

Specification for Unhairing and scudding knife for

leather industry

Specification for Chrome tanned leather laces for

heavy duty footwear (first revision)

Feb 2009

* IS 7742:1975

Specification for Synthetic emulsion resin binders

Feb 2003

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 7954:1976

Specification for Suitcases

Feb 2009

IS 8087:1976

Specification for Briefcases

Feb 2009

IS 8121:1987

Specification for Chromed buff calf skin in wetblue condition (first revision)

Feb 2009

IS 8155:1976

Specification for Portfolios

Feb 2009

IS 8170:1981

Guidelines for identification of finished leather for

export (third revision)

Feb 2009

IS 8517:1977

Specification for Bag, air travel

Feb 2009

IS 8518:1977

Specification for Suitcase air travel

Feb 2009

* IS 8601:1977

Specification for Myrobalan nuts (whole and

crushed) for tanning industry

Mar 2001

Specification for Leather sealing cups: Part 1 `U'

Nov 2006

Specification for TAMARIND seed testa

Feb 2003

IS 8863(Part 1):1978

* IS 9004:1978

IS 9155:1979

Leather for gas meter diaphragms

Feb 2009

IS 9159:1979

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 11944:1987

Specification for Wallet, leather

Feb 2009

* IS 11987:1986

Specification for Wax-emulsion for leather finishing

Feb 2003

IS 12435:1988

Guidelines for grading of hides and skins on the

basis of mass and size

Oct 2010

IS 12607:1989

Measurement of hides and skins in the wet blue

condition - Guidelines

Feb 2009

IS 12623:1989

Leather - Chrome tanned cattle hides in wet-blue

conditions - Specification

Feb 2009

IS 12659:1989

Leather - Measurement of thickness of surface

coating on leather - Method of Test

Syntans - Methods of test

Feb 2003

IS 13307:1992

Resin finished shoe uppers from goat and sheep

skins - Specification

Feb 2009

* IS 13527:1992

Replacement syntans - Specification

Feb 2003

100

* IS 13528:1992

Jan 2002

104

* IS 14361:1996

Patent leather - Specification

Jan 2002

105

IS 14487:1997

Measurement of area of Leather - Guideline

Feb 2009

106

* IS 14488:1998

Sulphited fat liquors for leather-Specification

Feb 2005

107

IS 14575:1999

Determination of pentacholorophenol (PCP) in

leather - Method of test

Oct 2010

108

IS 14583:1998

Suede lining leather - Specification

Oct 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

109

IS 14816:2000

Leather - Method of test for Eco criteria

Oct 2010

110

IS 14898:2001

Eco criteria for finished leather - Specification

Oct 2010

111

IS 14969:2001

Leather - Upper leather made from splits - Method

of identification

Nov 2006

112

IS 14970:2001

Leather - Lastometer Grain Crack test - Method of

Nov 2006

113

IS 15776:2008

Polyurethane (PU) Coated Leather - Specification

114

IS 15779:2007

Metal Complex Syntans - Specification

FINALISED DRAFTS UNDER PRINT

DOC.CHD 17(1598)

Lining Leather - Specification

(third revision of IS 3840)

DOC.CHD 17(1599)

Patent Leather - Specification

(first revision of IS 14361)

DOC.CHD 17(1600)

Semichrome Suede Upper Leather - Specification

(first revision of IS 14360)

DOC.CHD 17(1606)
/ ISO 2822-1:1998

Raw cattle hides and calf skins - Part 1:

Descriptions of defects

DOC.CHD 17(1607)
ISO 4683-1:1998
DOC.CHD 17(1608)
/ ISO 4683-2:1999
DOC.CHD 17(1609)
/ ISO 7482-1 :1998
DOC.CHD 17(1611)
/ ISO 7482-3:2005

Raw sheep skins Part 1: Descriptions of defects

/
6
7
8

Raw Seep Skins Part 2: Designation and

Raw goat skins - Part 1: Description of defects
Raw goat skins - Part 3: Guidelines for grading on
the basis of defects

DOC.CHD 17(1613)
Leather - Wet blue sheep skins - Specification
/ ISO 5432:1999
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1

DOC.CHD 17(1616)

Specification for Myrobalan Extract (second

revision of IS 2716)

DOC.CHD 17(1617)

Specification for Babul Bark (first revision of IS

DOC.CHD 17(1618)

Specification for Basic Chromium Sulphate (For

Tanning) (first revision of IS 6301)

DOC.CHD 17(1619)

Specification for Sal Bark (first revision of IS

DOC.CHD 17(1620)

Specification for Myrobalan Nuts (whole and

Crushed) for Tanning Industry (first revision of IS

DOC.CHD 17(1621)

Specification for Taamarind Seed Testa (first

revision of IS 9004)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

DOC.CHD 17(1622)

Specification for Cashew Testa (first revision of IS

6658)

DOC.CHD 17(1625)

GORAN bark (second revision of IS 3969).

DOC.CHD 17(1626)

AVARAM bark (first revision of IS 5128))

DOC.CHD 17(1627)

Methods of test for Vegetable tanning materials,

(first revision of 5466).

DOC.CHD 17(1628)

Specification for Synthetic emulsion resin binders

(first revision of IS 7742).

DOC.CHD 17(1629)

Syntan - Method of Test (first revision of IS

DOC.CHD 17(1630)

Syntan for prevention of sludge formation in

vegetable tan liquors - Specification(first revision

DOC.CHD 17(1631)

Specificaiton for Sulphated oil for Leather fat

liquoring (first revision of IS 6357).

DOC.CHD 17(1632)

Specification for Wattle Bark (first revision of IS

DOC.CHD 17(1636)

Bleaching syntan - Specification (third revision of

IS 10286).

DOC.CHD 17(1637)

Pretanning syntans - Specification (first revision of

IS 13528).

DOC.CHD 17(1638)

Retanning syntans including acrylic and related

syntans- Specification (first revision of IS 13625)

DOC.CHD 17(1639)

Casein based aqueous pigment and finishes (first

revision of IS 3999).

DOC.CHD 17(1640)

Wattle extract (first revision of IS 6199).

DOC.CHD 17(1641)

Wax-emulsion for leather finishing (first revision of

IS 11987).

DOC.CHD 17(1642)

Sulphited fatliquors for leather-Specification (first

revision of IS IS 14488).

DOC.CHD 17(1643)

Synthetic sulphochlorinated fatliquors for leather

(first revision of IS 13606).

DOC.CHD 17(1644)

Cutch (second revision IS 3967).

DOC.CHD 17(1647)

Specification for Sonali Bark (first revision of IS

DOC.CHD 17(1648)

Replacement Syntans - Specification (first

revision of IS 13527)

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 17(1604)
/ ISO 2820:1974

Leather - Raw hides of cattle and horses - Method

of trim

DOC.CHD 17(1605)
/ ISO 2821:1974

Leather - Raw hides of cattle and horses Preservation by stack salting

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

DOC.CHD 17(1729)
/ IS/ISO 5398-1

Leather - Chemical determination of chromic oxide

content - Part 1 : Quantification by titration

DOC.CHD 17(1737)
/ ISO 4048

Leather - Chemical Tests - Determination of Matter

Soluble in Dichloromethane and Free Fatty Acid

DOC.CHD 17(1741)
/ ISO 17226-1

Leather - Chemical Determination of Formaldehyde

Content Part 1: Method Using High Performance Liquid
Chromatography

DOC.CHD 17(1615)
/ ISO 14931:2004

Leather - Guide to the selection of leather for

apparel (excluding furs)

DOC.CHD 17(1742)
/ ISO 17226-2

Leather - Chemical Determination of Formaldehyde

Content Part 2: Method Using Colorimetric
Analysis

DOC.CHD 17(1739)
/ ISO 5398-2

Leather - Chemical Determination of Chromic

Oxide
Content - Part 2: Quantification by Colorimetric

DOC.CHD 17(1612)
/ ISO 5431:1999
DOC.CHD 17(1610)
/ ISO 7482-2:1999

Leather - Wet blue goat skins - Specification

DOC.CHD 17(1614)
/ ISO 5433:1999
DOC.CHD 17(1730)
/ ISO 5398-3

Leather - Bovine Wet blue - Specification

DOC.CHD 17(1731)
/ ISO 5398-4

Leather - Chemical Determination of Chromic

Oxide
Content - Part 4: Quantification By Inductively

DOC.CHD 17(1732)
/ ISO 17232

Leather - Physical and Mechanical Tests Determination of Heat Resistance of Patent

DOC.CHD 17(1734)
/ ISO 26082

Leather - Physical and Mechanical Tests Determination of Soiling With Rubbing for
Automotive Leather

DOC.CHD 17(1735)
/ ISO 23910

Leather - Physical and Mechanical Tests Measurement of Stitch Tear Resistance

DOC.CHD 17(1736)
/ ISO 4044

Leather - Chemical Tests Preparation of Chemical Test Samples

DOC.CHD 17(1738)
/ ISO 4045
DOC.CHD 17(1740)
/ ISO 17075

Leather - Chemical Tests - Determination of Ph

10
11
12

Raw goat skins - Part 2 Guidelines for grading on

the

Leather - Chemical Determination of Chromic

Oxide Content = Part 3: Quantification By Atomic
Absorption Spectrometry

Leather- Chemical Tests - Determination of

Chromium (VI) Content

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 19 FOOTWEAR
SCOPE To formulate Indian Standard for terminology, sizes and fittings,
method of sampling and test, code of practice and specification for
footwear, footwear lasts and related items and shoe makers' hand tools
and equipment (other than those common to general engineering uses)
Liaison - To co-ordinate with ISO/TC 216 Footwear, ISO/TC 137 Sizing
systems, designation and marking of boots and shoes
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 1638:1969

Specification for Sizes and fittings of footwear

(first revision)

Mar 2011

** IS 1989(Part 1):1986

Specification for Leather safety boots and shoes

Part-1: For miners (fourth revision)

Mar 2011

** IS 1989(Part 2):1986

Specification for Leather safety boots and shoes

Part 2 For heavy Metal Industries (fourth revision)

Mar 2011

** IS 2050:1991

Glossary of terms relating to footwear (first

Mar 2011

IS 2051:1976

Methods for sampling of Leather Footwear (first

revision)

May 2007

* IS 3735:1996

Canvas shoes, rubber sole - Specification (second

revision)

* IS 3736:1995

Canvas boots, rubber sole - Specification

(second revision)

* IS 3976:2003

Protective Rubber-Canvas Boots for Miners Specification (fifth revision)

IS 4512:1978

Specification for Footwear lasts, Wooden (first

Mar 2011

IS 5520:1969

Handtools for Footwear Industry: Part 3 Designers'

Knife

May 2007

IS 6053(Part 4):1972

Specification for Handtools for Footwear Industry:

Part 4 Half Round Knife

May 2007

IS 6053(Part 5):1972

Handtools for footwear industry: Part 5 Straight

hacking knife

May 2007

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 6368:1971

Method for sampling of rubber and rubber

IS 8085(Part 1):1986

Footwear, method of test: Part 1 Dimensions,

Fitting, Adhesion Test, Peel Test, Heat Resistance
Test and Ageing Test

May 2007

IS 8085(Part 2):1999

Method of test for Footwear - Part 2 Footwear

perfrmance test, stiffner test for shambles,
lastometer test for cracking of uppers and
perfrmance test for upper fabrics, coated fabrics,
sock lining and other lining materials

Mar 2011

IS 8606:1977

May 2007

** IS 10702:1992

Rubber Hawai chappal - Specification (second

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

May 2007

IS 12240(Part 8):1988

Methods of test for polyvinyl chlorde boots: Part 8

Resistance to flexing for polyvinyl chloride upper
material

May 2007

Polyvinyl Chloride PVC industrial boots Specification (first revision)

Mar 2011

** IS 12254:1993

IS 13295:1992

Code of practice for Manufacture of leather safety

boots and shoes for workers in Mines and Heavy
Metal Industry

May 2007

IS 13800:1993

Shoe sizes - Method of marking

Mar 2011

** IS 13893:1994

Polyurethane soles semirigid

- Specification

May 2007

IS 13995:1995

Unlined moulded rubber boots - Specification

Oct 2008

IS 14544:1998

Leather safety footwear with direct moulded PVC

soles - Specification

Oct 2008

IS 15196:2002

Plastic Footwear Lasts - Specification

Oct 2008

IS 15251:2002

Lasts for Heavy Duty Shoes - Specification

May 2007

IS 15298(Part 4):2010
/ ISO 20347:2004

Personal protective equipment - Part 4

Occupational footwear (First Revision)

IS 15298(Part 1):2002
/ ISO 8782-1:1998

Safety, protective and occupational footwear for

professional use - Part 1: Requirements and Test
methods

IS 15298(Part 2):2002
/ ISO 8782-2:1998

Safety, protective and occupational footwear for

professional use - Part 2: Specification for Safety
Footwear

IS 15298(Part 3):2002
/ ISO8782-3:1998

Safety, protective and occupational footwear for

professional use - Part 3 Specification for
Protective Footwear

* IS 15298(Part 5):2004
/ ISO8782-5

Safety, protective and occupational footwear for

professional use- Part 5 Additional requirements
and test methods

Mar 2011

* IS 15298(Part 6):2004
/ ISO8782-6:2000

Safety, protective and occupational footwear for

professional use - Part 6 Additional specifications
for safety Footwear

Mar 2011

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

* IS 15298(Part 7):2004
/ ISO8782-7:2000

Safety, protective and occupational footwear for

professional use - Part 7 additional specification
for Protective Footwear

Mar 2011

* IS 15298(Part 8):2004
/ ISO8782-8:2000

Safety, protective and occupational footwear for

professional use Part 8 Additional specification for
occupational Footwear

Mar 2011

IS 15844:2000

Sports Footwear - Specification

FINALISED DRAFTS UNDER PRINT

1
2

DOC.CHD 19(1650)
/ ISO 20345:2004
DOC.CHD 19(1649)
/ ISO 20344:2004

Personal protective equipment - Safety footwear

Personal protective equipment - Test methods for
footwear

DOC.CHD 19(1651)
/ ISO 20346:2004
DRAFT STANDARDS FORMULATED

Personal protective equipment - Protective

DOC.CHD 19(1359)

Children Shoes

DOC.CHD 19(1811)

Specification for Canvas shoes,polymeric sole (IS

3735)

DOC.CHD 19(1812)

Specification for Canvas boots,polymeric sole (IS

DOC.CHD 19(1813)

Specification for protegtive rubber canvas boots

for miners (IS 3976)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 20 PAINTS, VARNISHES AND RELATED PRODUCTS

SCOPE To formulate Indian Standards for terminology, methods of sampling
and tests, codes of practice and specifications on paints (including
industrial varnishes and related products including their raw material.
Liaison To co-ordinate with the work of ISO/TC 35 `Paints and
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

Zinc chrome for paints - Specification (fourth

May 2009

IS 54:1988

Specification for green oxide of chromium for

paints (second revision)

May 2009

** IS 55:1970

Specification for ultramarine blue for paints (first

revision)

May 2009

IS 56:1993

Prussian blue (iron blue) for paints -Specification

(second revision)

May 2009

IS 58:1976

Specification for Litharge (first revision)

May 2009

IS 62:2006

Graphite for Paints -Specification (first revision )

IS 63:2006

Whiting for paint and putty - Specification ( third

revision)

IS 64:1972

Specification for Barium sulphate pigments for

paints (first revision)

IS 66:2006

Magnesium silicate pigments for paints Specification (second revision)

IS 67:1998

Silica for paints - Specificatin (second revisin)

IS 68:2006

China clay (Kaolin) for paints ( second revision)

** IS 70:1980

Specification for Cuprous oxide for paints (first

revision)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

IS 101(Part 3/Sec 4):1987

Methods of sampling and test for paints, varnishes

and related products Part 3 Tests on paint film
formation Sec 4 Finish (third revision)

May 2009

* INDICATES STANDARDS UNDER REVISION

IS 104:1979

Specification for Ready mixed paint, brushing, zinc

chrome, priming (second revision)

May 2009

IS 109:1968

Specification for Ready mixed paint, finishing,

priming, plaster, to Indian Standard Colour No.361
Light stone and No. 631 Light grey, white and off
white (first revision)

May 2009

** IS 110:1983

Specification for Ready mixed paint, brushing,

grey filler, for enamels for use over primers (first

May 2009

IS 133:2004

Enamel, interior(a) undercoating, (b) finishing Specification (fourth revision)

May 2009

IS 137:1965

Specification for Ready mixed paint, brushing,

matt or eggshell flat, finishing, interior to Indian
Standard Colour as required (revised)

May 2009

IS 138:1992

Ready mixed paint, marking for packages and

petrol containers (third revision)

May 2009

IS 139:1981

Ready mixed paint, marking, quick drying, for

marking with rubber stamps (second revision)

Dec 2010

** IS 140:1980

Specification for Ready mixed paint, exterior,

petrol resisting, air drying (first revision)

Dec 2010

** IS 142:1980

Specification for Ready mixed paint, exterior,

petrol resisting stoving (first revision)

Dec 2010

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

Mar 2007

** IS 198:1978

Varnish gold size (first revision)

May 2009

** IS 289:1963

Specification for Aluminium paste for paints

May 2009

** IS 337:1975

Specification for Varnish, finishing interior (first

revision)

: Part 2 Special test methods for alkyd resins
(second revision)

Mar 2007

IS 354(Part 3):1986

Methods of sampling and test for resins for paints:

Part 3 Special test methodsfor phenolic resins
(second revision)

Mar 2007

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 354(Part 4):1986

Methods of sampling and test for resins for paints:

Part 4 Special test methodsfor epoxy resins
(second revision)

Mar 2007

IS 354(Part 5):1986

Methods of sampling and test for resins for paints:

Part 5 Special test methodsfor polyamide resins
(second revision)

Mar 2007

IS 354(Part 6):1989

Resins for paints- Methods of sampling and test :

Part 6 Special test methods for amino resins
(second revision)

Mar 2007

IS 354(Part 7):1989

Resins for paints -Methods of sampling and test

Part 7 Special test methods for acrylic or venyl
acetate resins and emulsions (second revision)

May 2009

IS 356:1991

Ester gum resins - Specification(second revision)

Mar 2007

IS 411:1991

Titanium dioxide, anatase, for paints - Specification

(third revision)

May 2009

IS 419:1967

Specification for Putty, for use on window frames

(first revision)

Specification for Varnish, finishing, exterior,

synthetic, air drying (second revision)

varnishes for aircrafts

May 2009

114

IS 1873:1961

Specification for Thinner, antichill for cellulose

nitrate based paints, dopes and lacquers for

May 2009

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

115

IS 1874:1992

Ready mixed paint, universal, zinc chrome, priming

(synthetic) for light alloys (first revision)

May 2009

116

IS 2074:1992

Ready mixed paint, air drying, red oxide-zinc

chrome, priming-Specification (second revision)

May 2009

117

IS 2075:2000

Ready mixed paint, stoving, red-oxide-zinc chrome

priming - Specification (second revision)

Mar 2007

118

IS 2339:1963

Specification for Aluminium paint for general

May 2009

119

IS 2932:2003

Enamel, synthetic, exterior (a) undercoating, (b)

finishing (third revision)

May 2009

120

** IS 2933:1975

Specification for Enamel exterior (a) undercoating,

(b) finishing (first revision)

May 2009

121

IS 3493:1978

Methods of sampling and test for organic pigments

for paints (first revision)

Mar 2007

122

IS 3520:1992

Water -soluble sodium carboxymethyl cellulose Specification (second revision)

May 2009

123

IS 3526:1981

Barium chromate for paints (first revision)

Dec 2010

124

** IS 3527:1972

Specification for Mica for paints (first revision)

May 2009

125

IS 3536:1999

135

IS 5661:1970

Code of practice for packing and marking of

packages of paints, enamels, varnishes and allied

Mar 2007

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

136

IS 5666:1970

Specification for Etch (pretreetment) primer

May 2009

137

IS 5667:1970

Thinner for cellulose nitrate based paints and

Dec 2010

138

** IS 5691:1970

Specification for Lacquer, cellulose,nitrate

pigmented, finishing, glossy

May 2009

139

** IS 6125:1971

Specification for Enamel, synthetic, stoving, for

automobiles

May 2009

140

IS 6126:1971

Specification for Nitrocellulose surfacer

Dec 2010

141

IS 6127:1971

Specification for Varnish, spar and fungicidal

Dec 2010

142

IS 6667:1972

Glossary of terms used in synthetic resin industry

Mar 2007

143

** IS 6714:1989

Ready mixed paint, finishing, non-slip deck (first

revision)

May 2009

150

IS 8098(Part 1):1976

Code of practice for finishing of automobile bodies

Part 1 Finishing of passenger cars

Mar 2007

151

IS 8098(Part 2):1981

Code of practice for finishing of automobile bodies

Part 2 Refinishing of passenger cars

Mar 2007

152

IS 8662:2004

Enamel, synthetic, exterior (a) undercoating (b)

finishing for railway coaches - Specification
(second revision)

May 2009

153

IS 8766:1978

Specification for Driers for paints

May 2009

154

** IS 8767:1978

Specification for Calcium carbonate, precipitated

and activated for paints

May 2009

155

IS 8982:1991

Ready mixed paint, finishing air drying for war

equipment (first revision)

Mar 2007

156

** IS 8983:1978

Ready mixed paint, finishing, stoving for war

May 2009

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

157

** IS 9034:1978

Specification for Enamel, synthetic, exterior, air

drying, for use on primed surfaces of motor
vehicles and other equipment

May 2009

158

IS 9788:1981

May 2009

162

IS 11811:1986

Specification for Alkyd resins

Mar 2007

163

IS 11883:1986

Specification for Ready mixed paint, brushing, red

oxide, priming for metals

Dec 2010

164

IS 12744:1989

Ready mixed paint, air drying, red oxide, zinc

phosphate, priming-Specification

Polyurethane primer zinc phosphate (two pack) for

exterier painting of railway coaches-Specification

May 2009

173

IS 13798:1993

Polyurethane base knifing filler (Two pack) for

exterier painting of railway coaches-Specification

May 2009

174

IS 13799:1993

Polyurethane base surfacer (Two Pack) for

exterior painting of railway coaches - Specification

May 2009

175

IS 13871:1993

Powder coatings - Specification

May 2009

176

IS 13966:1994

Carboxymethyl cellulose for use in oil industries Specification

May 2009

177

IS 14209:1994

Epoxy enamel, two component, glossy -

May 2009

178

IS 14314:1995

Thinner general purpose for synthetic paints and

varnishes - Specification.

Mar 2007

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

179

IS 14355:1996

Zinc dust pigment for paints - Specification

Mar 2007

180

IS 14499:1998

Strontium chromate for paints - Speciification

May 2009

181

IS 14506:1998

Epoxy redoxide zinc phosphate weldable primer,

two component - Specification

Amino resins for paints - Specification

May 2009

188

IS 15366:2003

Dolomite for paint industry - Specification

May 2009

189

IS 15489:2004

Paint, plastic emulsion - Specification

May 2009

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 20(1657)

Specification for ready mixed paint, exterior, petrol

resisting, air drying (second revison of IS 140)

DOC.CHD 20(1658)

Specification for ready mixed paint, exterior, petrol

resisting, stoving (second revison of IS 142)

DOC.CHD 20(1659)

Specification for ready mixed paint, spraying,

finishing,stoving, enamel, for general purposes,
colour as required (second revison of IS 151)

DOC.CHD 20(1660)

Specification for ready mixed paint, brushing,

bituminous, black, lead free, acid, alkali and heat
resisting (fourth revison of IS 158)

DOC.CHD 20(1661)

Specification for ready mixed paint for road

marking (second revison of IS 164)

DOC.CHD 20(1805)

Method of sampling and test for paints, varnishes

and related products Part 8 Tests for pigments
and other solid Sect 4 Phthalic Anhydride( Fourth
revison of IS 101 (Part 8/Sec 4) C1

DOC.CHD 20(1810)

Polyurethene matt finish (two pack)- Specification

DOC.CHD 20(1858)

Specification for Lead and scarlet chromes(Fourth

revision of IS 50)

DOC.CHD 20(1859)

Specification for Calcium carbonate, precipitated

and activated for paints (First revision of IS 8767)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

DOC.CHD 20(1860)

Specification for Organic Pigments for Paints Parat

1 Azo Pigments (Toluidine Red;Chlorinated PNitroanilike Red; Arylamide Yellows and Para Red
(First revision of IS 3574(Part 1)

DOC.CHD 20(1868)

Enamel, synthetic, exterior (a) undercoating, (b)

finishing- Specification Part 1 For household and
decorative applications (fourth revision of IS

DOC.CHD 20(1869)

Enamel, synthetic, exterior (a) undercoating, (b)

finishing -Specification Part 2 For Industrial and
commercial applications (fourth revision of IS

DOC.CHD 20(1870)

Enamel exterior (a) undercoating, (b) finishing

Specification Part 1 for household and decorative
applications (second revision of IS 2933 )

DOC.CHD 20(1871)

Enamel exterior (a) undercoating, (b) finishing

Specification Part 2 for industrial and commercial
applications (second revision of IS 2933 )

DOC.CHD 20(1872)

Enamel, interior(a) undercoating, (b) finishing Specification Part 1 for household and decorative
applications (fifth revision of IS 133)

DOC.CHD 20(1873)

Enamel interior (a) undercoating, (b) finishing

Specification Part 2 for industrial and commercial
applications (fifth revision of IS 133 )

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 23 LAC, LAC PRODUCTS AND POLISHES

SCOPE a) To formulate Indian Standards for terminology, codes of practices,
methods of sampling, tests and specifications for lac, lac products,
polishes, related products and their raw materials.
Sl. No. IS Number/ DOC Number

Apr 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 6766:1993

Buffing compounds used for nickel and chrome

plated surfaces (first revision)

Polish, paste for floor and wooden furniture (first

revision)

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 24 BRUSHWARE
SCOPE To formulate Indian Standards for terminology; methods of sampling
and test; codes of practice; and specifications for various types of
brushes including industrial, domestic, personal hygiene and Civil
applications and filling materials.
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

* IS 384:2002

Brushes, paints and varnishes, flat Specification(fifth revision)

Sep 2007

* IS 486:1983

Brushes, sash tool, for paints and varnishes (third

revision)

Jun 2005

* IS 487:1997

Brush, paint and varnish, i) Oval ferrule bound, and

ii) round ferrule bound (fourth revision)

Jun 2005

IS 1103:1984

Specification for Brushes, artist's (third revision)

May 2008

IS 1104:1984

Specification for Brushes, lettering (second

May 2008

IS 1844:1993

Bristles-Specification (second revision)

May 2008

IS 2616:1963

Specification for Brush, i) cleaning tank, and ii)

commode and lavatory

May 2008

IS 2621:1976

Specification for Brush, commode chutes (first

revision)

May 2008

IS 2622:1986

Specification for Brush, banister (hand sweeping),

single (second revision)

May 2008

IS 2701:1986

Specification for Brush,carriage washing (without

handle) (second revision)

Jun 2005

* IS 3008:2002

Brushes, shoe blacking -Specification(third

Sep 2007

IS 3009:2002

Brushes, shoe polishing -Specification (third

Sep 2007

IS 3015:1985

Specification for Brush, scrubbing (first revision)

Sep 2007

IS 3387:2004

May 2008

IS 4214:1997

Brush, boiler tube (without shank) - Specification

(first revision)

Sep 2007

IS 4301:1999

Specification for Brushes, foundry, flat Specification (first revision)

May 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

Specification for Brushes, push-sweeping (without

handle)

May 2008

IS 7473:1974

Specification for Brushes, tar

May 2008

IS 7477:1974

Brushes, harness, hard

May 2008

IS 8592:1977

Methods for identification of brush filling materials

of animal origin

May 2008

IS 9276:1979

Specification for Brushes, horse

Sep 2007

IS 11750:1986

Specification for Brush, fitch, flat with long handle

May 2008

IS 12920:1990

Brush, drain cleaning (without handle)-Specification

May 2008

IS 13348:1992

Brush, rubber squeezer, with handle-Specification

Sep 2007

FINALISED DRAFTS UNDER PRINT

DOC.CHD 24(1663)

Brushes, paints and varnishes, flat- Part 1 Heavy

duty (Sixth revision of IS 384)

DOC.CHD 24(1664)

Brushes, sash tool, for paints and varnishes

(fourth revision of IS 486)

DOC.CHD 24(1665)

Brush, paint and varnish- i) Oval ferrule bound,

and ii) round, ferrule bound (fifth revision of IS

DOC.CHD 24(1666)

Brushes, shoe blacking ( fourth revision of IS

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

DOC.CHD 24(1369)

Draft Amendment No. 3 to IS 1103

DOC.CHD 24(1370)

Draft Amendment No. 2 to IS 3009

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 24(1668)

Brushes, paints and varnishes, flat- Part 2

Household purposes (Sixth revision of IS 384)

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION

DOC.CHD 24(1667)

Brushes, shaving (second revision of IS 4580)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 25 SOAPS AND OTHER SURFACE ACTIVE AGENTS

SCOPE a) To formulate Indian Standards for terminology, methods of
sampling and test and specifications for soaps; other surface active
agents including non-soapy detergents, wetting agents, emulsifying
agents, including formulated and speciality products and glycerine; and
b) To co-ordinate with the work of ISO/TC 91 Surface Active Agents
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 285:1992

Laundary soaps (third revision)

Feb 2011

* IS 286:1978

Methods of sampling and test for soaps (second

revision)

Feb 2008

IS 1061:1997

Disinfectant fluids, phenolic type -Specification

(fourth revision)

agents: Part 1 Relative dispersing power

Feb 2011

IS 5785(Part 2):1970

Methods for performance tests for surface active

agents: Part 2 Relative emulsifying power

Feb 2011

IS 5785(Part 3):1970

Methods for performance tests for surface active

agents: Part 3 Foaming power

Feb 2011

IS 5785(Part 4):1976

Methods for performance tests for surface active

agents: Part 4 Relative detergency (first revision)

Feb 2011

IS 5785(Part 5):1981

Methods for performance tests for surface active

agents: Part 5 Wetting power

Feb 2011

IS 6047:2009

Scouring products for Utensil cleaning Specification (First Revision)

IS 7532:1974

Specification for Soft soap

Feb 2011

IS 7597:2001

Surface active agents - Glossary of terms (first

revision)

Nov 2006

* IS 7983:1994

Toilet cleaner liquid - specification (first revision)

Feb 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 8180:1992

Household laundry detergent bars-Specification

(second revision)

Feb 2011

IS 8401:1994

Alkyl benzene sulphonic acid (acid slurry) (first

Feb 2011

IS 8540:1986

Cake (first revision)

Nov 2006

IS 11479(Part 2):2001

Antibacterial toilet soap - Specification Part 2 Liquid

Nov 2006

IS 11601:2002

Methods of safety Evaluation of synthetic

detergents - test for skin irritation and sensitization
potential of synthetic detergents

Quarternary ammonium compound based surface

cleaner, liquid - Specification

Feb 2008

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 15072:2002

Sodium alpha olefin sulphonate for cosmetic

detergent and other industrial use - Specification

Feb 2008

IS 15267:2003

Zeolite Detergent Grade - Specification

Feb 2008

FINALISED DRAFTS UNDER PRINT

DOC.CHD 25(1696)

Soaps- Determination of moisture and volatile

matter content - Oven method [Adoption of ISO

DOC.CHD 25(1697)

Soaps- Determination of content of ethanolinsoluble matter [Adoption of IS 673:1981]

DOC.CHD 25(1699)

Analysis of soaps - Determination of glyeerol

contemt -Titrimetric method [Adoption of ISO

DOC.CHD 25(1700)

Analysis of soaps - Determination of

unsaponifiable,unsaponified and unsaponified
saponifiable matter [Adoption of ISO 1067:1974]

DOC.CHD 25(1701)

Surface active agents -Determination of wetting

power by immersion[First revision of IS 5785(Part
5)][Adoption of ISO 8022:1990]

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

DOC.CHD 25(1698)

Surface active agents - Measurement of foaming

power - Modified Ross - Miles method [First
revision of IS 5785 (Part 3)] [ Adoption of ISO

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 25(1861)

Specification for Baby toilet soap (first revision of

IS 10523)

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 26 EXPLOSIVES AND PYROTECHNICS

SCOPE To formulate Indian Standards for terminology, methods of sampling
and test, packaging, codes of practice and specifications for
commercial explosives and their accessories, pyrotechnics and
fireworks preparations, safety matches and their raw materials; and
Coordination of work with international agencies
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 301:1982

Specification for Potassium nitrate for explosive

and pyrotechnic compositions (second revision)

Mar 2003

IS 438:2006

Aluminium powder for Explosives and Pyrotechnic

Compositions - Specification (second revision)

IS 708:1987

Specification for Potassium chlorate for explosive

and pyrotechnic industry (second revision)

Feb 2005

IS 1091:1985

Nitrocellulose (third revision )

Feb 2005

IS 2012:2006

Red phosphorus - Specification (First Revision)

IS 2307:2004

Magnesium powder for Explosive and Pyrotechnic

Compositions - Specification (second revision)

IS 2653:2004

Compositions

Feb 2005

IS 6609(Part 1):1972

Methods of test for commercial Blasting

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 6609(Part 3):1973

Methods of test for commercial Blasting

Explosives and Accessories: Part III Detonators,
general and permitted

Jan 2002

IS 6609(Part 4):1984

Methods of test for commercial blasting explosives

and accessories: Part IV Detonating fuses (first
revision)

Pyrotechnic Industry

Feb 2005

IS 7602:1975

Specification for chromate for Explosive and

pyrotechnic compositions

Feb 2005

IS 7632:1975

Specification for Detonators

Feb 2005

IS 7633:1982

Specification for Calcium carbonate for Explosive

and Pyrotechnic industry (first revision)

Feb 2005

IS 7738:1975

IS 10977:1984

Pentaerythritol for explosive industry

Feb 2005

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 11483:1985

Potassium perchlorate for explosives and

pyrotechnic compositions

Feb 2005

IS 13526:1992

Sodium Perchlorate solution for Explosives and

Pyrotechnic Compositions

Feb 2005

** IS 14784:2000

Fireworks signal Flares - Specification

** IS 14931:2001

Fireworks wheels - Specification

IS 15073(Part 1):2002

Packaging of Electric Detonators - Specification

Part 1 Wooden Cases

IS 15073(Part 2):2008

Packaging of Electric Detonator: Part 2 Corrugated

Fibreboard Case

IS 15074(Part 1):2002

Packaging of Non-Electric Detonators Specification Part 1 Wooden Cases

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

Sep 2008

IS 15447(Part 1):2004

Commercial blasting explosives Part 1

Nitroglycerine based explosives - Specification

IS 15447(Part 2):2008

Commercial blasting explosives Part 2

Slurry/Emulsion explosives - Specification

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

DOC.CHD 26(1172)

INDICATES STANDARDS UNDER REVISION

/ INDICATES DUAL NUMBER STANDARDS

Amendment no.1 to IS 6609

** INDICATES STANDARDS TO BE REVISED

| INDICATES EQUIVALENT STANDARDS

CHD 27 THERMAL INSULATION

IS 6598:1972

Specification for Cellular concrete for thermal

May 2010

IS 7509:1993

Thermal insulating cement - Specification (first

revision)

May 2010

IS 8154:1993

Preformed calcium silicate insulation (for

temperature upto 650degC) - Specification (first

Feb 2011

** IS 8183:1993

Bonded mineral wool - Specification (first revision)

Feb 2011

IS 9403:1980

Method of test for thermal conductance and

transmittance of built up sections by means of
guarded hot box

May 2010

IS 9428:1993

Preformed calcium silicate insulation (for

temperature upto 950degC) - Specification (first

Feb 2011

IS 9489:1980

Method of test for thermal conductivity of thermal

insulation materials by means of heat flow meter

Feb 2011

** IS 9490:1980

Method for determination of thermal conductivity

of thermal insulation materials (water colorimeter

Feb 2011

IS 9742:1993

Sprayed mineral wool thermal insulation Specification (first revision)

Feb 2011

** IS 9743:1990

Thermal insulation finishing cements Specification

Feb 2011

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 9842:1994

Preformed fibrous pipe insulation - Specification

(first revision)

Feb 2011

IS 10555:2002

Exfoliated vermiculite - Specification (first

Mar 2008

** IS 10556:1983

Code of practice for storage and handling of

insulation materials

Feb 2011

IS 11128:1984

Specification for Spray- applied hydrated calcium

silicate thermal insulation

May 2010

IS 11129:1984

Method of test for tumbling friability of preformed

block-type thermal insulation

May 2010

IS 11239(Part 1):2009
/ ISO 1923:1981

Method of test for rigid cellular thermal insulation

materials Part 1 Dimensions (First Revision)

IS 11239(Part 2):2009
/ ISO 845:1998

Method of test for rigid cellular thermal insulation

materials Part 2 Apparent Density (First Revision)

IS 11239(Part 3):2009
/ ISO 2796:1986

Method of test for rigid cellular thermal insulation

materials Part 3 Dimensional stability (first revision)

* IS 11239(Part 4):1985

Method of test for rigid cellular thermal insulation

materials Part 4 Water vapour transmission rate

IS 11239(Part 5):2009
/ ISO 4590:2002

insulating castables for temperatures upto 1

Feb 2011

IS 12432(Part 1):1988

Code of practice for application of spray applied

insulation Part 1 Mineral fibre

Feb 2011

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

Feb 2011

IS 12432(Part 2):1999

Application of spray applied insulation - Code of

practice Part 2 Calcium silicate

Feb 2011

IS 12432(Part 3):2002

Application of spray applied insulation - Code of

Practice Part 3 Polyurethene/Polyisocyarurate

Mar 2008

IS 12436:1988

Specification for preformed rigid polyurethane

(PUR) and polyisocyanurate (PIR) foams for

Feb 2011

IS 13204:1991

insulation materials at temperatures above -80 deg
C and up to 750 deg C - Code of practice (First

IS 14656:1999

Ceramic fibre products - Methods of test

May 2010

IS 15402:2003

Ceramic fibre blanket insulation - Specification

Mar 2008

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

DOC.CHD 27(1534)

Method of test for rigid cellular thermal insulation

materials Part 4 Water vapor transmission rate
(First revision of IS 11239(Pt 4)

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 27(1886)

Code of Practice for storage and handling of

Thermal Insulation Matrials (first revision of IS

DOC.CHD 27(1772)

Specification for Prefabricated Polyurethane

Sandwich Panels

IS 15402:2011

Amendment No. 1 to IS 15402:2003

DRAFT STANDARDS FORMULATED

DOC.CHD 27(1794)

Thermal insulation of cold storages -Code of

practice(Fourth Revision of IS 661)

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 30 NUCLEAR MATERIALS FOR PEACEFULL APPLICATIONS

SCOPE a) To formulate Indian Standards for Nuclear Energy (for peaceful
applications and disposal) for terminology, units and symbols,
specifications, codes of practice in the field of :
- materials for nuclear services (radioactive and non-radioactive),
methods of sampling and test for physical, chemical and isotopic
analysis of various radioactive materials, specifications for nuclear
grade chemicals,
- safe packaging, handling, transportation and storage of nuclear
materials, specifications for personal protective equipment,
- nuclear energy including radiation protection, nuclear fuel technology
and reactor technology,
- safety and environment surveillance.
b) To coordinate with the work of
- ISO/TC 85 Nuclear Energy and its subcommittees.
Sl. No. IS Number/ DOC Number

Title

IS 15854:2009

Nuclear grade Ion exchange resins - Specification

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 30(1747)

Radionuclides in Environmental Samples - Method

of Estimation Part : 1 Gross beta activity
measurement (First Revision of IS 14194 (Part

DOC.CHD 30(1748)

Radionuclides in Environmental Samples - Method

of Estimation Part :2 Gross alpha activity
measurement (First Revision of IS 14194 (Part

DOC.CHD 30(1255)

Radionuclides in Environmental Samples - Method

of Estimation Part: Methods of Sampling

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

No. of
Amd.

CHD 32 ENVIRONMENT PROTECTION AND WASTE MANAGEMENT

(EXCLUDING BIOMEDICAL AND NUCLEAR WASTE)
SCOPE

a) To formulate Indian Standards for

i) Terminology, methods of sampling and characterization
of ambient air, industrial emission, water, soil, sewage,
industrial effluents, solid waste including e-waste;
ii) Guidelines for control of pollution of air at source, water and land;
iii) Codes on waste minimization ,recycling, reuse, treatment
and disposal of wastes; and
iv) Characterization and classification of wastes, guidelines and
codes of practice for waste disposal.
b) To co-ordinate with the work of
i) ISO/TC 146 Air Quality,
ii) ISO/TC 147 Water Quality

Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

chemical) for water and wastewater :Part 11 pH
value (first revision)

Sep 2006

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

IS 3025(Part 30):1988

Methods of sampling and test (physical and

chemical) for water and wastewater :Part 30
Bromide (first revision)

May 2009

* INDICATES STANDARDS UNDER REVISION

/ INDICATES DUAL NUMBER STANDARDS

** INDICATES STANDARDS TO BE REVISED

| INDICATES EQUIVALENT STANDARDS

IS 3025(Part 31):1988

Methods of sampling and test (physical and

chemical) for water and wastewater :Part 31
Phosphorus (first revision)

May 2009

IS 3025(Part 32):1988

Methods of sampling and test (physical and

chemical) for water and wastewater :Part 32
Chloride (first revision)

May 2009

IS 3025(Part 33):2009

chemical) for water and wastewater :Part 47

May 2009

IS 3025(Part 48):1994

Methods of sampling and test (physical and

chemical) for water and wastewater :Part 48
Mercury(first revision)

May 2009

* INDICATES STANDARDS UNDER REVISION

/ INDICATES DUAL NUMBER STANDARDS

chemical)
for water and waste water: Part 58 Chemical

IS 3025(Part 59):2006

Methods of sampling and test(Physical and

chemical)for water and waste water Part 59
Manganese(first revision )

IS 3025(Part 60):2008

Methods of sampling and test (Physical and

chemical) for water and waste water Part 60
Fluoride (first revision)

IS 3025(Part 61):2008

Methods of sampling and test (Physical and

chemical)for water and waste water Part 61 Total
and free carbon dioxide (first revision of IS:3025)

IS 3025(Part 62):2006

Methods of sampling and test(Physical and

chemical) for water and wastewater Part 62

IS 3025(Part 63):2007

Methods of sampling and test (Physical and

Chemical) for water and wastewater Part 63
Oxygen absorbed in 4 hours(first revsion)

IS 3550:1965

Methods of test for routine control for water used

in industry

May 2009

IS 4167:1980

Glossary of terms relating to air pollution (first

May 2009

IS 5182(Part 1):2006

Methods for measurement of air pollution Part 1

Dust fall (first revision)

IS 5182(Part 2):2001

Methods for measurement of air pollution : Part 2

Sulphur dioxide (first revision)

* INDICATES STANDARDS UNDER REVISION

/ INDICATES DUAL NUMBER STANDARDS

** INDICATES STANDARDS TO BE REVISED

| INDICATES EQUIVALENT STANDARDS

Sep 2006

IS 5182(Part 3):1970

Methods for measurement of air pollution : Part 3

Radioactivity (particulate in air)

May 2009

IS 5182(Part 4):1999

Methods for measurement of air pollution : Part 4

Suspended particulate matter (first revision)

May 2010

IS 5182(Part 5):1975

Methods for measurement of air pollution : Part 5

Sampling of gaseous pollutants

May 2009

IS 5182(Part 6):2006

Methods for measurement of air pollution : Part 6

Oxides of nitrogen(first revision)

IS 5182(Part 7):1973

Methods for measurement of air pollution : Part 7

Hydrogen sulphide

May 2009

IS 5182(Part 8):1976

Methods for measurement of air pollution : Part 8

Sulphation rate

May 2009

IS 5182(Part 9):1974

Methods for measurement of air pollution : Part 9

Oxidants

May 2009

IS 5182(Part 10):1999

Methods for measurement of air pollution : Part 10

Carbon monoxide (first revision)

May 2009

IS 5182(Part 11):2006

Non methane hydrocarbons in air by gas
chromatography

Sep 2006

IS 5182(Part 22):2004

Methods for measurement of air pollution:Part 22

May 2009

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

IS 5182(Part 23):2006

Method for measurement of Air Pollution Part 23

Respirable suspended particulate matter (PM 10),
Cyclonic flow technique

IS 6582:1971

Bio-assay methods for evaluating acute toxicity of

Industrial Effluents and wastewaters

May 2009

IS 6582(Part 2):2001

Bio-assay Method for Evaluating Acute Toxicity of

industrial Effluents and waste water Part 2 Using
Toxicity Facctor to zebra fish (Brachydanio rerio)

Sep 2007

IS 7022(Part 1):1973

Glossary of terms relating to water, sewage and

industrial effluents, Part I

May 2009

IS 7022(Part 2):1979

Glossary of terms relating to water, sewage and

Industrial Effluents, Part II

May 2009

IS 7967:1976

Criteria for controlling pollution of marine coastal

May 2009

IS 8032:1976

Guide for treatment of distillery effluents

May 2009

IS 8073:1976

deionizing columns

May 2009

100

IS 9508:1980

Guide for treatment and disposal of effluents of

cotton and synthetic textile industry

May 2009

101

IS 9509:1980

Guide for teatment and disposal of effluents of

viscose rayon industry

May 2009

102

IS 9569:1980

Glossary of terms relating to solid wastes

May 2009

103

IS 9620:1980

May 2009

107

IS 10158:1982

Method for Analysis of solid wastes (Excluding

Industrial wastes)

May 2009

108

IS 10179:1982

Code of practice for control of air pollution in

petroleum refineries

May 2009

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

110

IS 10495:1983

Guide for treatment and disposal of effluents of

wool processing industry

May 2009

111

IS 11255(Part 1):1985

Methods for measurement of emissions from

stationary sources : Part 1 Particulate matter

May 2009

112

IS 11255(Part 2):1985

Methods for measurement of emissions from

stationary sources : Part 2 Sulphur dioxide

May 2009

113

IS 11255(Part 3):2008

Methods for measurement of emissions from

stationary sources : Part 3 Flow rate (first revision)

114

IS 11255(Part 4):2006

Method for measurement of emission from

stationary sources : Part 4 Hydrogen Sulphide and
Carbon disulphide(first revision)

115

IS 11255(Part 5):1990

Methods for measurement of emissions from

stationary sources : Part 5 Total fluorides

concentration of nitrogen dioxide - Method using
detector tubes for short-term sampling with direct

Sep 2007

130

IS 15210:2002
/ ISO 8762

Workplace air - Determination of vinyl chloride Charcoal tube/gas chromatographic method

Sep 2007

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

131

IS 15211:2002
/ ISO 9487

Workplace air - Determination of vaporous

aromatic hydrocarbons - Charcoal tube/solvent
desorption/gas chromatographic method

Sep 2007

132

IS 15309:2003
/ ISO 8518

Workplace air - Determination of particulate lead

and lead compounds - Flame or Electrothermal
atomic absorption spectrometric method

May 2009

FINALISED DRAFTS UNDER PRINT

DOC.CHD 32(1674)
/ ISO 7888:1985

Methods of sampling and test (Physical and

Chemical) for Water and Waste Water: Part 14
Specific Conductance (Wheatstone Bridge,
Conductance Cell) [ Second revision of IS

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 32(1673)
/ ISO 10523:1994

Methods of sampling and test (Physical and

Chemical) for Water and Waste Water: Part 11 pH
Value [second revision of IS 3025 (Part 11)]

DOC.CHD 32(1675)
/ ISO 11041:1996

Workplace Air- Determination of Particulate Arsenic

and Arsenic compounds and Arsenic Trioxide
Vapour- Methods by Hydride Generation and
Atomic Absorption Spectrometry

DOC.CHD 32(1676)
/ ISO 11174:1996

Workplace Air- Determination of Particulate

Cadmium and Cadmium compounds - Flame and
Electrothermal Atomic Absorption Spectrometric

DOC.CHD 32(1677)
/ ISO 16740:2005

Workplace Air- Determination of Hexavalent

Chromium in Airborne Particulate Matter Methods
by Lon Chromatography and Spectrophotometric
Measurement using Diphenyl Carbazide

DOC.CHD 32(1678)
/ ISO 17733:2004

Workplace Air- Determination of Mercury and

Inorganic Mercury Compounds- Methods by
cold_Vapour Atomic Absorption Spectrometry or
Atomic Fluorescence Spectrometry

DOC.CHD 32(1679)
/ ISO 17734-1:2006

Determination of Organ nitrogen Compounds in Air

using Liquid Chromatography and Mass
Spectrometry- Part 1: Isocyanates using

DOC.CHD 32(1680)
/ ISO 17734-2:2006

Determination of Organ nitrogen Determination of

Organ nitrogen Compounds in Air using Liquid
Chromatography and Mass Spectrometry- Part 2
Amines and Aminoisocyanates using Dibutylamine
and Ethyl Chloroformate Derivatives

DOC.CHD 32(1837)
/ ISO 9562:2004

Water Quality - Determination of Adsorbable

Organically Bound Halogens (AOX)

DOC.CHD 32(1838)

Methods of sampling and Test (Physical and

Chemical) for water and wastewater Part 64
Application of Inductively Coupled Plasma Mass
Spectrometry (ICP-MS): General Guidelines

DOC.CHD 32(1839)

Methods of sampling and Test (Physical and

Chemical) for water and wastewater Part 65
Application of Inductively Coupled Plasma Mass
Spectrometry (ICP-MS): Determination of 62

DOC.CHD 32(1544)

Solid waste management in the fertilizer industry Code of practice

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

DRAFT STANDARDS FORMULATED

DOC.CHD 32(1856)

Methods for Measurement of Air Pollution- Part 24 Ozone

IS 5182

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

CHD 34 ENVIRONMENTAL MANAGEMENT

SCOPE a) To formulate Indian Standards in the field of Environment
Management tools and systems excluding:
- test methods of pollutant
- setting limit values regarding pollutants of effluents
- setting environmental performance levels
- standardization of products
b) Liaison - To coordinate with the work of ISO/TC 207 Environmental
Management.
Sl. No. IS Number/ DOC Number

Title

Reaffirm
Date

No. of
Amd.

STANDARDS PUBLISHED
1

IS 14001:2004
/ ISO 14001

Environmental management systems Requirements with guidance for use(first revision)

IS 14004:2004
/ ISO 14004

Environmental management systems - General

guidelines on principles, systems and support
techniques(first revision)

IS 14015:2001
/ ISO 14015

Environmental Management-Environmental
assessment of sites and organizations (EASO)

* IS 14020:1998
/ ISO 14020

Environmental labels and declarations - General

principles

IS 14021:1999
/ ISO 14021

Environmental labels and declarations-Selfdeclared environmental claims (Type II

IS 14024:1999
/ ISO 14024

Environmental labels and declarations - Type I

Environmental labelling - Principles and procedures

IS 14025:2006
/ ISO 14025

Environmental labels and declarations - Type III

environmental declarations - Principles and

IS 14031:1999
/ ISO 14031

Environmental management - Environmental

performance evaluation-Guidelines

* IS 14040:1997
/ ISO 14040

Environmental Management - Life cycle

assessment - Principles and framework

IS 14044:2000
/ ISO 14044:2000

Environmental management - Life cycle

assessment - Requirements and guidelines
(Superseding IS/ISO 14041:1998, IS/ISO

IS 14050:2002
/ ISO 14050
IS 14063:2006
/ ISO 14063:2006

Environmental Management - Vocabulary

IS 14064(Part 1):2006
/ ISO 14064-1

Greenhouse gases Part 1: Specification with

guidance at the organization level for
quantification and reporting of greenhouse gas
emissions and removals

IS 14064(Part 3):2006
/ ISO 14064-3

Greenhouse gases Part 3: Specification with

guidance for the validation and verification of
greenhouse gas assertions

IS 14064(Part 2):2006
/ ISO 14064-2

Greenhouse gases - Part 2: Specification with

guidance at the project level for quantification,
monitoring and reporting of greenhouse gas
emission reductions or removal enhancements

Environmental management - Environmental

communication - Guidelines and examples

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

FINALISED DRAFTS UNDER PRINT

DOC.CHD 34(1570)
/ ISO 14040:2006

Environmental management - Life cycle

assessment - Principles and framework.

DOC.CHD 34(1624)
/ ISO 14020:2000

Environmental labels and declarations - General

principles

DOC.CHD 34(1623)
/ ISO 14065:2007

Greenhouse gases - Requirements for greenouse

gas validation and verification bodies for use in
accreditation or other forms of recognition.

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

DOC.CHD 34(1795)

DOC.CHD 34(1822)
/ Guide 64

Amendment NO. 1 to IS/ISO 14001:2004

Guide 64 - Guide for Addressing Environmental
Issues in Product Standards

* INDICATES STANDARDS UNDER REVISION

** INDICATES STANDARDS TO BE REVISED

/ INDICATES DUAL NUMBER STANDARDS

| INDICATES EQUIVALENT STANDARDS

Is.7087.1979 - Specification For Ceramic Tower Packings
No ratings yet
Is.7087.1979 - Specification For Ceramic Tower Packings
29 pages
Reaffirmed 1997
No ratings yet
Reaffirmed 1997
18 pages
CHD
No ratings yet
CHD
135 pages
Disclosure To Promote The Right To Information: IS 1314 (1984) : Calcium Chloride (CHD 1: Inorganic Chemicals)
No ratings yet
Disclosure To Promote The Right To Information: IS 1314 (1984) : Calcium Chloride (CHD 1: Inorganic Chemicals)
30 pages
IS797 - 2023 Salt Specifications - INDIA
No ratings yet
IS797 - 2023 Salt Specifications - INDIA
24 pages
CHD Programme of Work 2013
No ratings yet
CHD Programme of Work 2013
135 pages
Disclosure To Promote The Right To Information
No ratings yet
Disclosure To Promote The Right To Information
34 pages
Sodium Formate-Is.13475.1992 0
No ratings yet
Sodium Formate-Is.13475.1992 0
14 pages
Is 1919 1982
No ratings yet
Is 1919 1982
24 pages
Is 419-1967 - Putty For Use On Window Frames
No ratings yet
Is 419-1967 - Putty For Use On Window Frames
19 pages
Disclosure To Promote The Right To Information
No ratings yet
Disclosure To Promote The Right To Information
19 pages
Disclosure To Promote The Right To Information
No ratings yet
Disclosure To Promote The Right To Information
14 pages
IS 381 (1995) - Sodium Silicate - Specification
No ratings yet
IS 381 (1995) - Sodium Silicate - Specification
11 pages
DKFLVD LKSMK Fof'Kf"V: HKKJRH Ekud
No ratings yet
DKFLVD LKSMK Fof'Kf"V: HKKJRH Ekud
15 pages
Is 252 - Caustic Soda
No ratings yet
Is 252 - Caustic Soda
20 pages
Disclosure To Promote The Right To Information: IS 247 (1987) : Sodium Sulphite, Anhydrous (CHD 1: Inorganic Chemicals)
No ratings yet
Disclosure To Promote The Right To Information: IS 247 (1987) : Sodium Sulphite, Anhydrous (CHD 1: Inorganic Chemicals)
25 pages
Hydrolytic Resistance of Glass
No ratings yet
Hydrolytic Resistance of Glass
15 pages
Indian Standard (Second Retiion) : Specificatlon FOR Ferrous Sulphate, Heptahydrate
No ratings yet
Indian Standard (Second Retiion) : Specificatlon FOR Ferrous Sulphate, Heptahydrate
19 pages
LACH1 Manual en PDF
No ratings yet
LACH1 Manual en PDF
50 pages
Indian Standard: Specification For Copper Sulphate
No ratings yet
Indian Standard: Specification For Copper Sulphate
16 pages
Anachem M1 M2
No ratings yet
Anachem M1 M2
196 pages
Disclosure To Promote The Right To Information: IS 299 (1989) : Alumino-Ferric (CHD 1: Inorganic Chemicals)
No ratings yet
Disclosure To Promote The Right To Information: IS 299 (1989) : Alumino-Ferric (CHD 1: Inorganic Chemicals)
18 pages
Is 299 1989 PDF
No ratings yet
Is 299 1989 PDF
18 pages
Disclosure To Promote The Right To Information
No ratings yet
Disclosure To Promote The Right To Information
20 pages
Bicarbonate Is.2124.2000
No ratings yet
Bicarbonate Is.2124.2000
31 pages
Disclosure To Promote The Right To Information: IS 6135 (1981) : Soda Ash, Fused, Technical (CHD 1: Inorganic Chemicals)
No ratings yet
Disclosure To Promote The Right To Information: IS 6135 (1981) : Soda Ash, Fused, Technical (CHD 1: Inorganic Chemicals)
17 pages
Toilet Liquid Cleaner
0% (1)
Toilet Liquid Cleaner
12 pages
Indian Standard (First Revision) : Specification For Barium Chloride
No ratings yet
Indian Standard (First Revision) : Specification For Barium Chloride
19 pages
Specification For Putty, For Use On Window Frames: July 2011
No ratings yet
Specification For Putty, For Use On Window Frames: July 2011
5 pages
Is 252-2013 Ra 2018
No ratings yet
Is 252-2013 Ra 2018
15 pages
CHD20 (1859) C
No ratings yet
CHD20 (1859) C
14 pages
Glass Cleaner
No ratings yet
Glass Cleaner
16 pages
Inorganic Chemical Compounds Guide
No ratings yet
Inorganic Chemical Compounds Guide
17 pages
Harris QCA 8e Experiments
100% (1)
Harris QCA 8e Experiments
125 pages
Is 253 1985
No ratings yet
Is 253 1985
35 pages
Is 253 1985
No ratings yet
Is 253 1985
35 pages
As 2093-1977 Salt For Use in The Manufacture of Dairy Products
No ratings yet
As 2093-1977 Salt For Use in The Manufacture of Dairy Products
7 pages
Is 3328 1993 Quality Tolerances For Water For Swimming Pools (Amendment-2010)
No ratings yet
Is 3328 1993 Quality Tolerances For Water For Swimming Pools (Amendment-2010)
11 pages
CH - 1
No ratings yet
CH - 1
70 pages
Is 1514 1990 PDF
No ratings yet
Is 1514 1990 PDF
18 pages
CHEM-101 Lab Manual (1)
No ratings yet
CHEM-101 Lab Manual (1)
91 pages
Advantage Class Certified Standards & Reference Materials
No ratings yet
Advantage Class Certified Standards & Reference Materials
76 pages
Disclosure To Promote The Right To Information
No ratings yet
Disclosure To Promote The Right To Information
10 pages
Is 13871 1993 Powder Coating Specification
50% (2)
Is 13871 1993 Powder Coating Specification
14 pages
Is 548 1 1964
No ratings yet
Is 548 1 1964
73 pages
Is 548 1 1964
100% (1)
Is 548 1 1964
73 pages
Chemistry Lab Manual - Sep, 2024
No ratings yet
Chemistry Lab Manual - Sep, 2024
44 pages
POCl3 Titration
No ratings yet
POCl3 Titration
21 pages
Alkyl Benzene Sulphonic Acid
100% (1)
Alkyl Benzene Sulphonic Acid
17 pages
Coloremetric Analysis Methods
No ratings yet
Coloremetric Analysis Methods
13 pages
Chem-LAB Standards Catalog 2018-2020 PDF
No ratings yet
Chem-LAB Standards Catalog 2018-2020 PDF
529 pages
As 2669-1983 Sulphuric Acid For Use in Lead-Acid Batteries
No ratings yet
As 2669-1983 Sulphuric Acid For Use in Lead-Acid Batteries
7 pages
Chemistry Lab Guide for AIUB Students
No ratings yet
Chemistry Lab Guide for AIUB Students
44 pages
Dean - Practical Skills in Chemistry
100% (3)
Dean - Practical Skills in Chemistry
377 pages
Scope With Chemicals List
100% (1)
Scope With Chemicals List
5 pages
SDS CW-1287
No ratings yet
SDS CW-1287
7 pages
Chemical & Microbiological Score Calculator
No ratings yet
Chemical & Microbiological Score Calculator
3 pages
Jana Brochure 2012
No ratings yet
Jana Brochure 2012
12 pages
EN1348
67% (3)
EN1348
17 pages
COA Glycerin
No ratings yet
COA Glycerin
1 page
COA Gly 130110
No ratings yet
COA Gly 130110
1 page
Herbal Ingredients List
No ratings yet
Herbal Ingredients List
2 pages
TDS Byk-1681 en
No ratings yet
TDS Byk-1681 en
2 pages
Jana New
100% (1)
Jana New
16 pages
Blaine Vs Residues
67% (3)
Blaine Vs Residues
5 pages
96 Kuli Maratha
0% (1)
96 Kuli Maratha
37 pages
Mix Design Using Rheology Meter
No ratings yet
Mix Design Using Rheology Meter
5 pages
Calibration of Balance
No ratings yet
Calibration of Balance
3 pages
College of Arts Science & Commerce
No ratings yet
College of Arts Science & Commerce
2 pages
Calculation Standard Deviation For Concrete
100% (1)
Calculation Standard Deviation For Concrete
15 pages
Paper CCS 2014tobias Danner
No ratings yet
Paper CCS 2014tobias Danner
3 pages
EAS 148-6 Determination of Fineness
No ratings yet
EAS 148-6 Determination of Fineness
14 pages
Chemistry Outreach Program: Massachusetts Institute of Technology Cambridge, MA
No ratings yet
Chemistry Outreach Program: Massachusetts Institute of Technology Cambridge, MA
15 pages
Concrete Design Mix Analysis
No ratings yet
Concrete Design Mix Analysis
6 pages
Unit Conversion: Length
No ratings yet
Unit Conversion: Length
35 pages
114 Q
No ratings yet
114 Q
6 pages
Sym Group Crystal Structure Atomic Number Atomic Weight
No ratings yet
Sym Group Crystal Structure Atomic Number Atomic Weight
59 pages
Bca I Sem Syllabus (General) - I Sem Bca Syllabus (General) 1
No ratings yet
Bca I Sem Syllabus (General) - I Sem Bca Syllabus (General) 1
19 pages
Monza 5 UHF Gen 2 RFID Tag Chip: Introducing
No ratings yet
Monza 5 UHF Gen 2 RFID Tag Chip: Introducing
2 pages
Gears
No ratings yet
Gears
3 pages
SSRN 5220706
No ratings yet
SSRN 5220706
28 pages
Business Strategy and Analysis: The Skills You Need Guide To
0% (1)
Business Strategy and Analysis: The Skills You Need Guide To
7 pages
Sensors: Design and Development of A Novel Invasive Blood Pressure Simulator For Patient's Monitor Testing
No ratings yet
Sensors: Design and Development of A Novel Invasive Blood Pressure Simulator For Patient's Monitor Testing
19 pages
ED Lab Exp 9
No ratings yet
ED Lab Exp 9
16 pages
Asicot-Sse-2022-178 Technical Offer Vnip 19-03-2022
No ratings yet
Asicot-Sse-2022-178 Technical Offer Vnip 19-03-2022
42 pages
Beowulf
No ratings yet
Beowulf
6 pages
348 Task Analysis Presentation
No ratings yet
348 Task Analysis Presentation
13 pages
Reflection Paper
No ratings yet
Reflection Paper
2 pages
Summative Test No. 3 Math 6 Quarter 3
86% (7)
Summative Test No. 3 Math 6 Quarter 3
2 pages
AAU5831 Description (01, Germany VDF)
No ratings yet
AAU5831 Description (01, Germany VDF)
35 pages
Isat Practice Test
No ratings yet
Isat Practice Test
23 pages
Postgraduate PG Mba Semester 3 2023 November Advanced Financial Management Pattern 2019
No ratings yet
Postgraduate PG Mba Semester 3 2023 November Advanced Financial Management Pattern 2019
4 pages
C79000 G8976 1025 10 - RS900G - EquipmentManual
No ratings yet
C79000 G8976 1025 10 - RS900G - EquipmentManual
44 pages
Anti Locking Brakes: Seminar by
No ratings yet
Anti Locking Brakes: Seminar by
18 pages
Template 30042021 - IJPTE
No ratings yet
Template 30042021 - IJPTE
5 pages
Deep Learning Drizzle
No ratings yet
Deep Learning Drizzle
12 pages
Prepared By:: Engr. Mark Roger R Huberit Ii Civil / Structural Engineer PRC NO. 072279
100% (1)
Prepared By:: Engr. Mark Roger R Huberit Ii Civil / Structural Engineer PRC NO. 072279
9 pages
4,693,000 # in War Name TH # of Store Loot Small Store Weight Date Error
No ratings yet
4,693,000 # in War Name TH # of Store Loot Small Store Weight Date Error
1 page
Credit Transactions Exam Guide
No ratings yet
Credit Transactions Exam Guide
39 pages
10 - All Roots Lead To Rock
100% (1)
10 - All Roots Lead To Rock
273 pages
Shimano 2020-2021 Product Compatibility Guide
No ratings yet
Shimano 2020-2021 Product Compatibility Guide
70 pages
Physics For Entertainment Volume 1 (Yakov Perelman)
No ratings yet
Physics For Entertainment Volume 1 (Yakov Perelman)
211 pages
Geography Exam Prep Guide
No ratings yet
Geography Exam Prep Guide
7 pages
M&A Notes
No ratings yet
M&A Notes
13 pages
Residential Road Construction Guide
No ratings yet
Residential Road Construction Guide
18 pages
FABM FS and Closing Entries
100% (1)
FABM FS and Closing Entries
18 pages
Terrestrial Trunked Radio
No ratings yet
Terrestrial Trunked Radio
8 pages