ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS
Description
Unit
50mm Thick sand spread, levelled and compacted to falls and cambers
with an 8-ton roller.
m2
4.40
200mm (finished) Thick crusher run base course consisting of two layer of
125mm loose layers of crusher run as described spread and levelled and
ditto.
m2
7.30
300mm Thick crusher run spread, levelled and compacted to falls and
cambers with an 8-ton roller.
m2
8.50
Item
No.
Rate (RM)
Percentage(%)
Increase/Decrease
IC
ROADWORK
87.50mm (finished) Thick layer of wearing course consisting of two layers
as specified, the first layer 62mm thick made up to 37.50mm - 62.50mm
aggregate and the 2nd layer 25.50mm thick made up of 25mm - 37.50mm
aggregate, each layer spread and levelled and well rolled and compacted.
12.20
50mm Thick asphaltic concrete wearing course, spread, levelled and
campacted to an even gradient and crossfalls with an approved roller.
m2
9.90
40mm Ditto.
m2
9.60
Apply one coat of 80/100 penetration bituminous binder seal as specified,
at the rate of 4.08 litres per square meter on wearing course, including
blinding with 19mm (nominal) aggregate and lightly rolled with 6-ton roller.
m2
6.80
Ditto but at the rate of 1.36 litres per square meter ditto.
m2
3.80
Provide and lay 37.50mm thick premix carpet course consisting of stones
of maximum size 19mm and including a layer of bituminous emulsion tack
coat applied at a rate of 0.435 litres per square meter.
m2
11.30
2.70
28.00
PW
m2
10
Prepare and apply 2 coats approved road line paint as specified on
premix road, 100mm wide.
ROAD KERB
11
300mm x 150mm x 600mm Precast reinforced concrete (1:2:4-20mm
aggregate) as specified kerb finished fair on exposed surfaces, bedded,
jointed and pointed in cement mortar (1:3) including all necessary
excavation, formwork and painting as specified.
12
300mm x 150mm x 600mm Ditto with scupper opening ditto.
39.00
13
100mm x 300mm x 600mm Ditto with splayed top ditto.
20.00
Concrete (1:3:6 - 25mm to 38mm aggregate) in culvert base, surround
etc.
m3
206.20
Reinforced concrete (1:2:4 - 20mm aggregate) in culvert base, surround,
head and wing walls.
m3
226.70
Sawn formwork to culvert base, surround, head and wing walls.
m2
15.40
CULVERT
14
15
16
EXT.WORK/2011/1
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS. (CONT'D)
Description
Unit
450mm Diameter precast reinforced spun concrete pipe Class "S" and
jointing with and including precast concrete collars in cement mortar (1:1)
including forming fillet all round at each end of collars.
107.50
18
600mm Ditto.
138.10
19
750mm Ditto.
172.20
20
900mm Ditto.
212.10
21
1200mm Ditto
22
Item
No.
Rate (RM)
Percentage(%)
Increase/Decrease
17
IC
CULVERT (Cont'd)
2,920.30
600mm x 600mm Box culvert including excavation and backfilling with
approved materials, concrete collars, handling, jointing, concrete bedding
and everything necessary all in accordance with the Specification and as
directed by the S.O.
564.50
23
750mm x 600mm Ditto.
625.60
24
900mm x 750mm Ditto.
713.40
25
900mm x 900mm Ditto.
733.70
26
1200mm x 1200mm Ditto.
988.40
27
1500mm x 1200mm Ditto.
1,243.70
82.60
89.70
a) 100mm Diameter bend.
No
71.60
b) 150mm Ditto.
No
79.00
c) 100mm Diameter for T junction.
No
81.10
d) 150mm Ditto.
No
90.20
31
150mm Diameter UPVC pipe in class 'D' including fixing as specified.
77.80
32
UPVC fittings as specified:a) 150mm Diameter bend.
No
33.50
b) Ditto for T junction.
No
54.20
EXTERNAL WATER RETICULATION
100mm Diameter Mild steel (MS) pipe including fixing as specified.
PW
28
29
150mm Ditto.
30
Mild steel (MS) pipe fittings as specified:-
EXT.WORK/2011/2
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS. (CONT'D)
Description
Item
No.
Unit
Rate (RM)
Percentage(%)
Increase/Decrease
EXTERNAL WATER RETICULATION (Cont'd)
100mm Diameter HDPE pipe grade PN10 including fixing as specified.
37.50
34
150mm Ditto.
71.70
35
HDPE pipe fittings as specified:a) 100mm Diameter 90 degree elbow.
No
184.20
b) 150mm Ditto.
No
429.50
c) 100mm Diameter equal tee.
d) 150mm Ditto.
e) 100mm Diameter 90 degree bend.
f) 150mm Ditto.
36
HYDRANT & VALVES
IC
33
No
76.70
No
40.20
No
70.30
No
1,810.00
No
2,428.00
No
2,293.00
59.10
PRECAST CONCRETE MANHOLE
a) Precast concrete manhole size 1500mm diameter as specified
complete with and including HDPE Corrugated (Profiled) Double Wall
Sewer, Brances and channels; ductile or cast iron heavy duty
manholecover and frame; pit excavation commencing from formation
level; disposal of surplas excavated materials; as per drawing nos.
PW
37
45.70
Supply and install 100mm cast iron hydrant including ductfoot
adaptor bent, short piece and all requisite bolts and base
concrete and hydrant marker post.
No
b) ditto 1200mm ditto
FENCING
38
Chain link fencing 1.50m high consisting of 50mm x 50mm x 6mm painted
steel angle post at 3.00m centres with bottom end embedded in concrete
(1:3:6 - 25mm aggregate) and with 50mm diamond mesh (No.10 S.W.G.)
galvanised chain link fence, including three strands of No.8 galvanised
straining wire and including 50mm x 50mm x 6m painted steel angle
corner struts with bottom end embedded in and including concrete (1:3:6 25mm aggregate) base.
39
Ditto 50mm diamond mesh (No.12 S.W.G.) ditto.
60.60
40
Ditto 65mm diamond mesh (No.10 S.W.G.) ditto.
62.10
41
Ditto 65mm diamond mesh (No.12 S.W.G.) ditto.
63.60
42
Extra over last 4 items for chain link fencing 1.8m high having three (3)
strands of two ply barb wire (13 gauge with 4 pointed barb at 75mm) on
top.
13.70
EXT.WORK/2011/3
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS. (CONT'D)
Item
No.
Description
43
PVC coated Chain link fencing 1.50m high consisting of 50mm x 50mm x
6mm painted mild steel angle post at 3.00m centres with bottom end
embedded in concrete (1:3:6-25mm aggregate) and with 50mm diamond
mesh (No. 10 S.W.G.) pvc coated chain link fence, including three
strands of No. 8 galvanised straining wire and including 50mm x 50mm x
6mm painted mild steel angle corner struts with bottom end embedded in
and including concrete (1:3:6-25mm aggregate) base.
Unit
58.80
Mild steel double leaf gate size 4.90m wide x 1.50m high overall, each
leaf comprising of 150mm wide frame constructed of 3mm thick mild steel
plate welded to and including 2 No 25mm x 25mm x 3mm mild steel
hollow section closed at ends with 6mm thick mild steel plate, top and
bottom rails constructed of 2 No 3mm thick mild steel plate welded to and
including 2 No 50mm x 25mm x 3mm thick mild steel hollow section
closed at ends with 6mm thick mild steel plate, infilled with 20mm x 20mm
mild steel hollow section vertical members at 125mm centres closed at
ends with 6mm mild steel plate, with and including mild steel bolt and
sleeve, lock plate, butt hinges, welding and painting.
Mild steel single leaf gate size 1.05m wide x 1.50m high ditto.
46
Mild steel sliding gate size 6.0m wide x 1.80m high, constructed of
100mm x 50mm mild steel hollow gate frame all around including
intermediate framing to be welded together to infilled with 25mm x 25mm
mild steel hollow at 150mm centres, fixing all members together, filling all
welds smooth complete with sliding gate roller track and painting with one
coat metallic primer and three coat alkali resin base paint or equivalent
and approved and all necessary works for proper completion.
No
2,503.33
No
633.30
45
No
2,881.90
Spot turfing on level surfaces at 450mm centres in chequered pattern and
including 50mm bed of black earth as specified.
m2
3.70
Close turfing on level surfaces and including 50mm bed of black earth as
specified.
m2
5.50
Close turfing to banks on and including 50mm bed of black earth and
pegging, all as specified.
m2
5.80
Turfing for playing fields including site preparation, 100mm thick river
sand, 100mm thick top soil, turfing with an average 50mm thick earth bed,
compaction, watering, weed control, mowing and top dressing all as
specified.
m2
8.80
300mm x 300mm Precast reinforced concrete semi elliptical channel
75mm thick including all necessary excavation.
17.70
52
375mm x 375mm Ditto.
23.00
53
450mm x 450mm Ditto.
32.80
54
600mm x 600mm Ditto.
53.40
PW
TURFING
47
48
49
50
ROADSIDE DRAINS
51
Percentage(%)
Increase/Decrease
IC
44
Rate (RM)
EXT.WORK/2011/4
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS. (CONT'D)
Item
No.
Description
Unit
55
50mm Thick precast concrete cover slab 300mm wide cast in
approximately 600mm length, notched at ends and reinforced with and
including one layer of 150mm (6G) x 150mm (6G) steel fabric
reinforcement and placing in position.
12.60
60mm Thick approved interlocking concrete paver block as specified, laid
on and including 30mm thick sand and 60mm thick hardcore bed and all
necessary excavation, all in accordance with the manufacturer's
instruction and as specified.
m2
67.00
57
80mm Ditto.
m2
70.30
58
100mm Ditto.
GABION
59
Supply and lay 2.0m x 1.0m x 1.0m PVC Coated wire mesh rock filled
gabion
MILD STEEL GRATING
m2
76.50
m3
309.10
230mm x 600mm Mild steel grating drain cover with welded connection,
comprising 50mm x 50mm x 6mm thick angle all round, infilled with 40mm
x 6mm thick flats at 30mm centres, painted with one coat red oxide
primer; set in and including forming rebate at top of drain.
60
Percentage(%)
Increase/Decrease
IC
56
Rate (RM)
No
47.40
600mm x 600mm Ditto.
No
114.80
62
1200mm x 1200mm Ditto.
No
443.10
63
850mm x 850mm Mild steel grating as sump cover ditto.
No
225.00
PW
61
EXT.WORK/2011/5
