WORKING AT HEIGHT PERMIT
Rev 1
PROJEK MASS RAPID TRANSIT-LEMBAH KELANG
JAJARAN SUNGAI BULOH-KAJANG
PERMIT NUMBER
:_____________________________________________________________
CONTRACTOR (Company)
:_____________________________________________________________
CONTRACTOR (Employee Name)
:_____________________________________________________________
NOMINATED SAFETY WATCHER :_____________________________________________________________
LOCATION OF WORK (Exact)
:___________________________________________________________
DESCRIPTION OF WORK
:_____________________________________________________________
SPECIAL INSTRUCTIONS
: ____________________________________________________________
Which of the following hazards are associated with this work:
Falling Objects Risk of Falling Persons
Unguarded Edges Unsecured Ladders
High Winds Overhead Electric Cables
Lack of Space Uneven Floor Surfaces
Manual Handling of Loads Fragile Roofs
OTHER HAZARDS NOT LISTED ABOVE:
Does the work involve the use of:
Ladders
Scaffolding
Working at Height Lone Working
Is a specific method statement required?
(if so attach it to this permit)
Ladders:
Ladder in good condition?
Base is mounted on good footing?
If extended then 2 rung overlap?
Secured and long enough?
Barrier at base of ladder and
warning sign?
WORKING AT HEIGHT PERMIT
Rev 1
PROJEK MASS RAPID TRANSIT-LEMBAH KELANG
JAJARAN SUNGAI BULOH-KAJANG
Access Scaffolding:
Scaffolding erected by: ________________________________________________________________________
Kick boards in place
Hand rails in place
Barrier and warning signs in place
Working at Height:
Approximate height work will be carried out : ________________________________________________________
Kick boards in place?
Hand rails in place?
Lone Working:
The danger(s) associated with the work identified above in carrying out the work are:
Work area to be inspected by : _______________________________________________________________
at intervals of : ____________________________________________________________________________
I declare that the above has been made known to the competent person in charge of the work and consider the above
mentioned area to be safe for the competent person to commence work.
Permit Controller:
Signed:
Date:
Time:
________________
________________
________________
________________
Acceptance by competent person prior to commencement
I understand the work that is to be carried out and the safety precautions that are necessary to complete the work
safely as outlined in the appropriate method statement and risk assessments. If conditions are such that the method
statement and risk assessments become invalid it is my responsibility to stop work immediately and notify the
person who authorised this permit to work. The disposal of any residues of the hazardous materials used will be in
accordance with the Environmental Protection Act.
Competent Person:
________________
Signed:
________________
Date:
________________
Time:
________________
WORKING AT HEIGHT PERMIT
Rev 1
PROJEK MASS RAPID TRANSIT-LEMBAH KELANG
JAJARAN SUNGAI BULOH-KAJANG
Continuation of Work
I hereby authorise the work specified above to continue until the time stated below and that I have checked the
safety arrangements and confirm that they remain adequate.
Permit has been extended to:_________________am / pm
Permit Controller:
Signed:
Date:
Time:
________________
________________
________________
________________
I have checked the safety arrangements and am satisfied and agree to accept responsibility to complete the specified
work by the revised time.
Competent Person:
Signed:
________________
Date:
________________
________________
Time:
________________
Permit Cancellation
This permit is cancelled. The work is / is not complete. Safety precautions have / have not been removed.
Permit Controller:
Signed:
Date:
Time:
________________
________________
________________
________________
Completion of Work Final check by Contractor / Employee
I declare that the work described above is complete all work equipment, persons and materials under my control
have been withdrawn. All safeguards have been reinstated and the work area returned to a safe status and service.
Competent Person:
Signed:
Date:
Time:
________________
________________
________________
________________
Completion of Permit - Permit Controller
I declare that the permit is now closed and I have received copies of the permit back from the Competent Person.
The area has been inspected and is free from risk and all fire protection systems have been reinstated to their normal
operating status.
Permit Controller:
Signed:
Date:
Time:
________________
GUIDANCE NOTES
________________
________________
________________
WORKING AT HEIGHT PERMIT
Rev 1
PROJEK MASS RAPID TRANSIT-LEMBAH KELANG
JAJARAN SUNGAI BULOH-KAJANG
USE OF LADDERS
Ladders should be in good condition
They should be long enough for the work in hand
Ladders should be secured both at the top and bottom
If extensions are used there should be at least two rungs overlap
Sufficient clearance must be provided at the base of the ladder with barriers and warning signs
Observe the 1 in 4 rule
Ladder tags are in place
USE OF STEP LADDERS
Hinges, fittings and cords should be in good condition
Treads should be secure and not cracked or broken
Steps should be set correctly, level and secure, open to full extent and adjusted to the correct angle
Ensure that work can be completed safely without over-reaching or standing or kneeling on the top step or platform
Sufficient clearance must be provided around the ladder with barriers and warning signs provided
Ensure that excessive the work does not require excessive weight to carried i.e. sheets of wood or plaster board
Ladder tags are in place
USE OF SCAFFOLDING
Scaffolding must be erected by a competent person
It must be protected against damage from traffic
It must be barriered off and any one inside the barrier must wear head protection
Kick boards must be in-place to stop items from being knocked off the scaffolding
Hand rails must be fitted at all points where there is a risk of falling through
Scaffold tags are in place
WORKING AT HEIGHT
It is a danger to yourself and others when working above a height of 2 metres (6 feet)
Fall prevention measures should be used i.e. barriers
A safety harness should be worn wherever reasonably practical, where other controls are not employed
Crawling boards must be used when working on elevated surfaces that are not designed for pedestrian traffic access
LONE WORKING
When working alone, workers must have adequate communication or:
Adequate levels of supervision
