FORTRON 1120L4 | PPS | Specialty
Description
Fortron 1120L4 is a 20% glass fiber reinforced injection molding grade exhibiting excellent heat and chemical resistance,
inherent flame retardancy, high hardness and stiffness at elevated temperatures.
Physical properties
Value
Unit
Test Standard
Density
Water absorption (23C-sat)
1480
0.02
kg/m
%
ISO 1183
ISO 62
Mechanical properties
Value
Unit
Test Standard
Tensile stress at break (5mm/min)
Tensile strain at break (5mm/min)
Flexural modulus (23C)
Flexural strength (23C)
Unnotched impact str (Izod) @ 23C
Notched impact strength (Izod) @ 23C
Rockwell hardness
120
1.5
8000
170
35
7.0
100
MPa
%
MPa
MPa
kJ/m
kJ/m
M-Scale
ISO 527-2/1A
ISO 527-2/1A
ISO 178
ISO 178
ISO 180/1U
ISO 180/1A
ISO 2039-2
Thermal properties
Value
Unit
Test Standard
DTUL @ 1.8 MPa
Flammability @1.6mm nom. thickn.
255
V-0
C
class
ISO 75-1/-2
UL94
Contact Information
Americas
Europe
Ticona
Product Information Service
8040 Dixie Highway
Florence, KY 41042
USA
Tel.: +1-800-833-4882
Tel.: +1-859-372-3244
email: prodinfo@ticona.com
Ticona on the web: www.ticona.com
Ticona GmbH
Information Service
Tel.: +49 (0) 180-5842662 (Germany)*
+49 (0) 69-30516299 (Europe)
Fax: +49 (0) 180-2021202 (Germany & Europe)**
email: infoservice@ticona.de
Internet: www.ticona.com
*starting 01.01.2007 0,14/minute + local landline rates
**0,06/Call + local landline rates
Customer Service
Tel.: +1-800-526-4960
Tel.: +1-859-372-3214
Fax: +1-859-372-3125
Printed: 18. January 2008
Page: 1
Ticona - A business of Celanese
FORTRON 1120L4 | PPS | Specialty
General Disclaimer
NOTICE TO USERS: Values shown are based on testing of laboratory test specimens and represent data that fall within the standard range
of properties for natural material. These values alone do not represent a sufficient basis for any part design and are not intended for use in
establishing maximum, minimum, or ranges of values for specification purposes. Colorants or other additives may cause significant variations
in data values.
Properties of molded parts can be influenced by a wide variety of factors including, but not limited to, material selection, additives, part
design, processing conditions and environmental exposure. Any determination of the suitability of a particular material and part design for any
use contemplated by the users and the manner of such use is the sole responsibility of the users, who must assure themselves that the
material as subsequently processed meets the needs of their particular product or use.
To the best of our knowledge, the information contained in this publication is accurate; however, we do not assume any liability whatsoever for
the accuracy and completeness of such information. The information contained in this publication should not be construed as a promise or
guarantee of specific properties of our products. It is the sole responsibility of the users to investigate whether any existing patents are
infringed by the use of the materials mentioned in this publication.
Moreover, there is a need to reduce human exposure to many materials to the lowest practical limits in view of possible adverse effects. To
the extent that any hazards may have been mentioned in this publication, we neither suggest nor guarantee that such hazards are the only
ones that exist. We recommend that persons intending to rely on any recommendation or to use any equipment, processing technique or
material mentioned in this publication should satisfy themselves that they can meet all applicable safety and health standards.
We strongly recommend that users seek and adhere to the manufacturers current instructions for handling each material they use, and
entrust the handling of such material to adequately trained personnel only. Please call the telephone numbers listed (+49 (0) 69 30516299 for
Europe and +1 859-372-3244 for the Americas) for additional technical information. Call Customer Services for the appropriate Materials
Safety Data Sheets (MSDS) before attempting to process our products.
The products mentioned herein are not intended for use in medical or dental implants.
Copyright 2007, Ticona, all rights reserved. (Pub. 26-Dec-2007)
Printed: 18. January 2008
Page: 2
Ticona - A business of Celanese
