DIGICON Series

CONTROLLERS,
TIMERS, COUNTERS
& HOUR METERS
edge of
cutting trol
he on
A t t urrent c
c
 INDEX

Sr. Product Page

1 Leganza
Digital Controllers, 1

2 Digital Timers, Eliro 4

3 Digital Timer-Cum-Counters, Excello 6

4 Digital Hour Meters and Counters 12

Supply from ISO 9001

Certified Unit
 Digital Controllers,
Leganza
FRONT DISPLAY

8 2 1

C1 C2 I1 I3 I5 ANI1

SUP + SUP - I2 I4 I6 ANI2

3

DEL ALT

Z4
4
6
Z1 Z2 Z3

ESC OK

Q1 Q2 Q3 Q4

Q1 Q2 Q3 Q4

FEATURES 5

• Offers integrated, ready to use, wide range 7

programmable functions to include 8 Timers,
8 Counters, 4 Time Switches, 4 Analogue functions 1 2 analogue inputs for 88DDT0 or 88DDT8, otherwise digital.
and real time clock.
2 6 digital inputs
• 64 or 250 lines ladder diagram programming with
3 Power supply terminals, L, N for 87DDT0 and 87DDT8 and
key pad.
Sup + and Sup - for 88DDT0 and 88DDT8
• 8 digital inputs for maintained-contact switches,
4 LC display
momentary-contact switches, sensors etc. or 6 digital
and 2 analogue inputs. 5 Digital outputs
• 4 relay type digital outputs for connecting the load. 6 Keypad
• Extendable up to 32 inputs and 16 outputs using 7 Interface for Memory Card or PC cable located on lower
Extension Modules. side and not seen in the front view.
• Comfortable alpha-numeric LC display for all steps 8 Terminals for Extension Module.
(logic and set points), functions (timers, counters,
time switches and annalogue), inputs, outputs and Note : Colours are used on the above diagram for indication
day-time. purpose only.

• PC Interface for easy programming, managing

multiple programmes and for simulation. The special • Widely used in low cost and simple automation, such
software, Leganza-Soft, enables creating ladder as Auto-Packing Machines, Auto-Printing Machines,
diagrams, simulation, testing, documentation and Domestic and Commercial Building Controls,
printing. Auto-Parking Controls, Home Applications etc.
• With in-built EEPROM memory, programmes and
parameters are saved despite accidental power
failure. ACCESSORIES
• DIN 35 Rail or optional base mounting for Leganza 8GDDT1 : Leganza Software CD
and Extension Module. 8GDDT2 : Serial Interface Cable
• Optional EEPROM Memory Card, having same 8GDDT3 : Memory Card
memory as in-built, allows transfer of the programme
8GDDT4 : Instruction Manual
and parameters, secured back-up and local storage.
8GDDT5D : Extension Module for 110-240V AC.
• Optional Extension Module, same size, with LED
display instead of LCD, for extending inputs and 8GDDT5E : Extension Module for 12-24V AC.
outputs exactly as per the basic Unit, without PC
interface and key pad.
• Compact and standardised [72(4 modular spaces)
× 90 × 95 mm] dimensions.
• With mark.

1
 Digital Controllers,
Leganza
SPECIFICATIONS

88DDT0 88DDT8 87DDT0 87DDT8

Digital Inputs 6 8
Analog Inputs 2 –
Supply voltage 12-24V DC 110-240V AC, 50/60Hz
Supply variation -10% to +10% -20% to +10%
Digital input voltage range OFF (“0”): 5V AC max. OFF (“0”): 40V AC max.
ON (“1”): 12V AC min. ON (“1”): 80V AC min.
Digital input current 5mA 5mA
Analogue input voltage range 0 to +10V DC –
Analogue input Resolution 1 part in 256 –
Real Time Clock Present Present
Outputs 4 Relays (electro mechanical) 4 Relays (electro mechanical)
Continuous maximum 10A (Resistive load), 10A (Resistive load)
current output 240V AC or 28V DC 240V AC or 28V DC
Indications, Alpha-numeric LCD, 12 Characters × 4 Lines LCD, 12 Characters × 4 Lines
Power consumption ~3W ~3W
Operating temperature 0 to +50°C 0 to +50°C
Storage temperature 0°C to + 70°C 0°C to + 70°C
Protection IP20 IP20
Mounting DIN 35 Rail or base DIN 35 Rail or base
Main/Expansion Unit Dim., mm 72 (4 modular spaces)×90×65 72 (4 modular spaces)×90×65
PC Interface RS232 C RS232 C
Lines available for Ladder Diagram 64 lines 250 lines 64 lines 250 lines

SCHEMATIC CONNECTIONS

UP TO 3
EXTENSION MODULE

INPUTS
ADDITIONAL
110 - 240 INPUTS
VAC

C1 C2 I1 I3 I5 I7 C1 C2 I/P1 I/P3 I/P5 I/P7

L N I2 I4 I6 I8 L N I/P2 I/P4 I/P6 I/P8

DEL ALT 1 2 3 4 5 6 7 8 LEDs

Z4 I/P
SEL A EXTENSION
O/P
Z2 1 2 3 4 B MODULE
Z1 Z3 C
ESC OK

Q1 Q2 Q3 Q4 O/P1 O/P2 O/P3 O/P4

Q1 Q2 Q3 Q4 O/P1 O/P2 O/P3 O/P4

PC
Memory
Card LEGANZA
OUTPUTS 8GDDT3 ADDITIONAL CD
OR OUTPUTS

Serial
Interface
Cable
8GDDT2
TO
SERIAL
PORT

All dimensions in mm

2
 Digital Controllers,
Leganza
DIMENSIONS
14.3
DIN RAIL
(35 mm-SYMMETRICAL)

DEL ALT

100.0 C/C
107.0

Z4

90.0

45.0
Z2
Z1 Z3
ESC OK

36.0 Ø4.2
65.0
72.0

Leganza

14.3
DIN RAIL
(35 mm-SYMMETRICAL)
100.0 C/C

I 9 I10 I11 I12 I13 I14 I15 I16

90.0
107.0

45.0

Q5 Q6 Q7 Q8

36.0 Ø4.2

72.0 65.0

Extension Module

All dimensions in mm

3
 Digital Timers, Eliro
FRONT DISPLAY

RUN TIME

FUNCTION PRESET TIME

RANGE HMS UP/ DN

SET ADJ

LED INDICATION
FOR
RELAY STATUS

FEATURES
• 8 mode multifunction facility for complete flexibility • Easy front settings.
and wide range applications. • Tamper-proof with key lock function.
• Timing from 0.1 second to 999 hours.
• Confirms to IEC standards for EMI / EMC, with
• Selectable up/down counting modes to show
mark.
elapsed/remaining time.
• Compact and standard size of 1 module space.
• 3 digit LC display for preset time and run time.
• Optional base or DIN 35 Rail mounting.
• Wide operating range for supply voltage.

SPECIFICATIONS FUNCTIONS

Cat No. V0DDT0

P: A1-A2 Power Supply Pulse
Nominal 110-240V AC or 24V AC/DC
Voltage (Ur) (selectable) (A) S: 1. On Delay : The Timer Starts when both Power (P) &
B1
Operating Range -15% to +10% of Ur T Signal (S) are applied. The relay is energized at the end
R: 15-18 of Preset Time (T) & remains On till Power is removed.
Frequency 50/60 Hz
(B) S: B1 2. Cyclic Off/On (Off Start [Sym, Asym]) : TON
Modes On delay, Cyclic off/on, T OFF T ON T OFF T ON and TOFF can be same or different. The relay
Cyclic on/off, Signal on/off R: 15-18 keeps on changing its status till the power is removed
Signal off Delay, Interval, (C) 3.Cyclic On/Off (On Start [Sym, Asym]) :
Signal off/on, One shot output. S: B1
T ON T OFF T ON TOFF
This function is quite similar to the function (b)
but initially the relay is on for period TON after the
Timing h:m m:s hr min sec R: 15-18 power is applied.
9:59 9:59 999 999 999
99.9 99.9 99.9 (D) S: B1 4. Signal On/Off : The output relay is turned on
T T T T for Preset Time (T) whenever the Signal (S) is
Repeat Accuracy ± 50 ms R: 15-18 applied or removed.
Max. Reset Time 100 msec (E) 5. Signal Off Delay : Output relay becomes on
Max. Switching Rate, when Signal (S) is applied. Timer duration (T) starts
S: B1 when Signal (S) is removed. At the end of Timer
at max./min. load 360/1000 per hour T duration (T) the output relay goes off. Signal (S), if
R: 15-18
Output Contacts 1 C/O, AgNi 90/10 (Cadmium free) applied during the Timer duration (T) will re-trigger
the Timer and the total duration will be extended.
Output Contact Rating 5A @ 240 V AC / 28 V DC
(resistive) (F) S: B1 6. Interval : When Signal (S) is applied, the Timer
T starts and the output relay is energized. The output
5
Electrical Life 1 × 10 operations R: 15-18 relay becomes off at the end of Timer Duration (T).
Mechanical Life 5 × 106 operations (G) S: B1 7. Signal Off/On : When Signal (S) is applied or
Power Consumption 15 VA T T T T removed, the relay changes its state after Timer
R: 15-18 duration (T).
Dimension (WxDxH) 17.5 × 76 × 89 (mm)
(H) 8. One shot Output : When Signal (S) is applied,
Terminal Capacity 2.5 mm² max. S: B1 the Timer Duration (T) star ts. At the end of Timer
T 1 SEC. Duration (T), the relay gets energized for
Mounting Base/DIN rail (Sym.35mm) R: 15-18 approximately 1 Sec.
Weight 85 gms approx (unpacked)
Notes : P = POWER, S = SIGNAL, R = RELAY.

4
 Digital Timers, Eliro
STANDARDS AND CERTIFICATION
Certification
Environmental CE
Temperature Limits Operating -10° to +50°C
Storage -20° to +65°C
Humidity 93% Rh
Installation Category II IEC1010 - 1 1990 + 2nd Amendment 1995
Pollution Degree II IEC1010 - 1 1990 + 2nd Amendment 1995
Degree of Protection IP 30 IEC Pub 947 - 1(1998) / IS 13947 Part I 1993
Electromagnetic Compatibility (EMC)
• Vibration F = 10 to 55 Hz, A = 0.35mm or 5gm IS 9000 (Part VIII-1981); IS 9001 (Part XIII-1981)
• Electrostatic Discharge Level III (Air 8KV / Contact 6KV) IEC 1000 - 4 - 2, First Edition 1995 - 01
• Fast Transients Level III 2KV (Peak) Tr / Th = 5 / 50 Rep. Freq. = 5KHz IEC 1000 - 4 - 4, First Edition 1995 - 01
• Surges Level IV Tr / Th = 8/20µs Common Mode : 4KV IEC 1000 - 4 - 5, First Edition 1995 - 02
Differential Mode : 2KV
• Voltage Dips 30% reduction / 10 ms, 60% reduction / 100 ms IEC 1000 - 4 - 11, First Edition 1994 - 06
• Voltage Interruption >95% reduction / 5000 ms IEC 1000 - 4 - 11, First Edition 1994 - 06
Immunity (EMC)
Port - Enclosure 80 - 1000 MHz 10V / m (unmodulated rms) EN 50082 - 2 : 1995
80%AM (1KHz)
Port - AC Mains 0.15MHz - 80MHz 10 V/m (unmodulated ms) EN 50082 - 2 : 1995
80%AM (1KHz)
Radiated (EMC)
Port - Enclosure 30MHz - 230 MHz 30 dBµ V/m Quasi Peak EN 50081 - 2 : 1994
Measured at 30 m distance
230MHz - 1000 MHz 37 dBµ V/m Quasi Peak
Measured at 30 m distance
Conducted Emission
Port - AC Mains 0.15MHz - 0.5MHz 79 dBµ V Quasi Peak, 66 dBµ V Average EN 50081 - 2 : 1994
0.50MHz - 30MHz 73 dBµ V Quasi Peak, 60 dBµ V Average

DIMENSIONS

17.5 BASE MOUNTING 76.0

(35 mm-SYMMETRICAL)
DIN RAIL
100.0 C/C

89.0
67.0

45.0

Overall Dimensions (D×H×W) : 76.0 × 89.0 × 17.5 mm

All dimensions in mm

5
 Digital Timer Cum Counter,
Excello
FRONT DISPLAY

1
TIMER / COUNTER

6
2

7
3

8 LOCK

H: M: S 1 2 4

9 LOCK/SET 5

10

RESET

FEATURES
• 48×48 mm format front. TIMER COUNTER
• Option of configurating as either Timer or Counter. 1 Elapsed time Current count
• Easy to read LC display.
2 Set time Preset value
• Simple operation.
3 Output status Output status
• Option of screw terminals for wires/lugs or 11 Pin
socket mouting termination. 4 Up/Down counting --
• Panel mounting 5 Change set time Change Preset value
RANGE 6 Operating mode 1 or 2 Setting
display indication
Cat No. Supply Voltage Termination 7 LOCK indication LOCK indication
42DFT0 240V AC 50/60 Hz Screw Terminals
8 Range indication --
42DFS0 240V AC 50/60 Hz 11 PIN Socket
41DFT0 110V AC 50/60 Hz Screw Terminals 9 LOCK/SET Key LOCK/SET Key
41DFS0 110V AC 50/60 Hz 11 PIN Socket 10 RESET Key RESET Key
45DFT0 24V AC / DC Screw Terminals
45DFS0 24V AC / DC 11 PIN Socket

COMMON SPECIFICATIONS TIMER SPECIFICATIONS

1. Supply Voltage 240V AC, 110V AC, 24V AC/DC
Modes of A (On Delay), B (Cyclic Off/On),
2. Supply Variation -15% to +10% of Supply Voltage operation C (Cyclic On/Off), D (Signal On/Off),
3. Power Consumption 15 VA E (Signal Off Delay), F (Signal Off/
4. Indications 7 segment LC display On), G (Interval), H (One Shot
5. Operating temperature -10°C to +50°C Output) [Selectable by DIP switch]
6. Storage temperature -20°C to +65°C Time range DIP Switch Selectable
7. Case material Lexan 143, gray
H:M:S H:M Hr Min Sec
8. Weight 150 gms. nett
95:59:59 9999:59 99999:9 99999.9 99999.9
9. Overall dimensions 105×48×48 mm for socket mtg.
89×48×48 mm for screw term. Output 1 Instantaneous + 1 Delayed / 2 Delayed
10. Panel cutout 45×45 mm ± 0.1 mm Relay [Selectable by DIP switch]
Time count-
COUNTER SPECIFICATIONS UP/DOWN Selectable
ing Direction
Mode of Addition (UP), Subtraction (DOWN), Indication 7 segment LCD, Elapsed Time 7mm Height
operation Direction (DIR), Independent (IND), Phase Set Time 4.45mm Height
(PHASE) [Selectable by DIP Switch]
Lock Permanent “KEY LOCK” with DIP Switch
Power failure
Battery or LOCK/UNLOCK with Front panel key
memory method
Output OUT1 or OUT2 as per Set value1 or
value 2 respectively, [Selectable by DIP
Switch] as per the diagrams.
Digits -99999 to 999999 (0 to 999999 for setting)
Counting
speed (Input 30 Hz/4 kHz [Selectable by DIP Switch]
max.frequency)

6
 Digital Timer Cum Counter,
Excello
TIMER OPERATION MODES

T t T

P : A1- A2
On Delay
S : B1
(A)
T
R : 15-18

T T t T T T t
A1- A2
P :
Cyclic OFF/ON B1
S :
(b) T OFF T ON T OFF T ON
R :
15 18

A1- A2 T T t T T T t
P :
Cyclic ON/OFF B1
S :
(C) T ON T OFF T ON T OFF
R : 15-18

T T T t T t

P : A1- A2
Signal ON/OFF B1
S :
(d) T T T T
R : 15-18

T t t T t

P : A1- A2
Signal OFF Delay
S : B1
(E) T
R : 15-18

T T t t T

P : A1- A2
Interval
S : B1
(F) T
R : 15-18

T T t T T t T t

P : A1- A2
Signal OFF/ON
S : B1
(G) T T T
T
R : 15-18

T T t t T

P : A1- A2
One Shot
S : B1
(H)
T 1 SEC.
R : 15-18

T : PRESET TIME t : PERIOD < T P : POWER S : SIGNAL R : RELAY

COUNTER OPERATION MODES

1. Input mode
(1) For the input mode you can choose one of the following five modes.

* Addition UP * Directive DIR * Phase PHASE

* Subtraction DOWN * Independent IND

7
 Digital Timer Cum Counter,
Excello
(2) After the counter has been reset. Setting 2 is displayed in the count-down mode. “Ø” appears instead in all
other modes.
Input mode Operation Minimum Input signal width 30 Hz
IN1 or IN2 works as an input * Example where IN1 is the count input an IN2 is the input block (gate).
block (gate) for the other input.
H
IN1 L A A A A
Blocked
H
Addition IN2 L
Counting (addition) 0 1 2 3 ----- n-3 n-2 n-1 n
UP
Counting (subtraction) n n-1 n-2 n-3 ----- 3 2 1 0

Reset Count Up

IN1 or IN2 works as an input * Example where IN2 is the count input an IN1 is the input block (gate).
block (gate) for the other input. Blocked Blocked
H
IN1 L
A A A A

Subtraction H
IN2 L
DOWN
Counting (addition) 0 1 2 3 4 ----- n-1 n

Counting (subtraction) n n-1 n-2 n-3 n-4 ----- 1 0

Reset Count Up

* “A” must be more than the minimum input signal width

IN1 is the count input and IN2 is H
IN1
the addition or subtraction directive L A A A A
input. IN2 adds at L level and Addition Subtraction Addition
Directive subtracts at H level H
IN2 L
DIR Counting (addition) 0 1 2 3 4 3 2 1 0 1 2 3 4

Reset

* “A” must be more than the minimum input signal width

IN1 is addition input and IN2 is H

IN1
substraction input. L

H
IN2 L
Independent
Counting 0 1 2 3 4 3 2 1 2 1 2 3
IND
Reset

* IN1 and IN2 are completely independent, so there is no restriction

on signal timing
H
Addition when the IN1 phase IN1 L
advances beyond IN2, and
subtraction when the IN2 phase IN2
H
L
Phase advances beyond IN1. B B
Phase advance Phase retard
PHASE
Counting 0 1 2 3 2 1 0

Reset

* “B” must be more than the minimum input signal width

2. Output mode
For the set value 1, you can choose one of the For the set value 2, you can choose one of the
following four modes. following eight modes.
* Maintain output/over count I HOLD-B * Maintain output/hold count HOLD-A
* Maintain output/over count II HOLD-C * Maintain output/over count I HOLD-B
* Maintain output/over count III HOLD-D * Maintain output/over count II HOLD-C

8
 Digital Timer Cum Counter,
Excello
* One shot/over count SHOT-A * Maintain output/over count III HOLD-D
* Phase PHASE * One shot/over count SHOT-A
* One shot/recount I SHOT-B
* One shot/recount II SHOT-C
* One shot/hold count SHOT-D
* Output mode for set value 1

Output mode Operation * (Example when input mode is either addition or subtraction)
Output control is maintained after Counting (addition) n-2 n-1 n n+1 n+2
count-up completion and until
Maintain output resetting However, counting is Counting (subtraction) n+2 n+1 n n-1 n-2
Able
Over count I possible despite completion of Counting able/unable
ON
count-up OFF
HOLD-B Output Control 1

* n : Set value 1
Output control is maintained after n-2 n-1 n n+1 n+2
Counting (addition)
count-up completion and until the
Maintain output next signal enters. However, Counting (subtraction) n+2 n+1 n n-1 n-2
Able
Over count II counting is possible despite Counting able/unable
ON
completion of count-up Output Control 1 OFF OFF
HOLD-C
* n : Set value 1

If the count value is greater than or Counting (addition) n-2 n-1 n n+1 n+2
equal to the preset value when
Counting (subtraction) n+2 n+1 n n-1 n-2
Maintain output counting up, the control is held. The Able
Counting able/unable
Over count III count operation is possible anyway. ON
OFF
HOLD-C Output Control 1
(addition)
ON
Output Control 2 OFF
(subtraction)

* n : Set value 1

Output control is maintained after Counting (addition) n-2 n-1 n n+1 n+2
count-up completion for a fixed time
Counting (subtraction) n+2 n+1 n n-1 n-2
One shot (approx. 1 sec.) Counting is possible
Able
Over count despite completion of count-up. Counting able/unable
ON
SHOT-A Output Control 1
OFF OFF

Approx 1s
* n : Set value 1

* Output mode for set value 2

Output mode Operation * (Example when input mode is either addition or subtraction)
Output control is maintained after
Counting (addition) n-3 n-2 n-1 n
count-up completion and until
Maintain output resetting During that time, the count Counting (subtraction) 3 2 1 0
Able Unable
Over count display does not change from that Counting able/unable
at count-up completion. ON
HOLD-A OFF
Output Control 2

* n : Set value 2

Output control is maintained after Counting (addition) n-2 n-1 n n+1 n+2
count-up completion and until
Maintain output resetting However, counting is Counting (subtraction) 2 1 0 -1 -2
Counting able/unable Able
Over count I possible despite completion of ON
count-up Output Control 2 OFF
HOLD-B

* n : Set value 2

9
 Digital Timer Cum Counter,
Excello
Output mode Operation * (Example when input mode is either addition or subtraction)

Output control is maintained after Counting (addition) n-2 n-1 n n+1 n+2
count-up completion and until the
Maintain output next signal enters. However, Counting (subtraction) 2 1 0 -1 -2
Able
Over count II counting is possible despite Counting able/unable
ON
completion of count-up Output Control 2 OFF OFF
HOLD-C

* n : Set value 2

If the count value is greater than or Counting (addition) n-2 n-1 n n+1 n+2
equal to the present value when Counting (subtraction) 2 1 0 -1 -2
Maintain output counting up the counter starts Counting able/unable Able
Over count III counting up again. the count ON
Output Control 2 OFF
operation is possible anyway. (addition)
HOLD-D ON
Output Control 2 OFF
(subtraction)

* n : Set value 2

Counting (addition) n-2 n-1 n n+1 n+2

Output control is maintained after
Counting (subtraction) 2 1 0 -1 -2
count-up completion for a fixed time Able
Counting able/unable
One shot (approx. 1 sec.) Counting is ON
Over count possible despite completion of OFF OFF
Output Control 2
count-up.
SHOT-A Approx 1s

* n : Set value 2

Output control is maintained after Counting (addition) n-2 n-1 n n+1 n+2

count-up completion for a fixed Counting (subtraction) 2 1 0 -1 -2

One shot time (approx. 1 sec.) Counting is Reset'(automatic)
Recount I possible despite completion of Counting able/unable Able
ON
count-up. However, reset occurs Output Control 2
SHOT-B OFF OFF
simultaneous with completion of
count-up While output is being Approx 1s
maintained, restarting of the
count is not possible. * n : Set value 2

Counting (addition) n-1 n n+1 0 1

Output control is maintained after Counting (subtraction) 1 0 -1 n n-1

count-up completion for a fixed time Reset(automatic)
Counting able/unable Able
One shot (approx. 1 sec.) Counting is possible
ON
Recount II despite completion of count-up. Output Control 2 OFF OFF
However, reset occurs simultaneous
SHOT-C
with output OFF. Approx 1s

* n : Set value 2

Counting (addition) n-1 n 0 1

Output control is maintained after
Counting (subtraction) 1 0 n n-1
count-up completion for a fixed time Reset(automatic)
One shot (approx. 1 sec.) During that time, Counting able/unable Able Unable Able
ON
Hold count the count display does not change Output Control 2 OFF OFF
from that at count-up completion,
SHOT-D
Reset occurs simultaneous with Approx 1s
output OFF.
* n : Set value 2

10
 Digital Timer Cum Counter,
Excello
Output mode for set value 1
HOLD-C HOLD-D HOLD-B SHOT-A
As usual As usual
SHOT-A
(this combination unchanged) (this combination unchanged)
Approx.1s
Output 1 Output 1

Output 1
Output mode SHOT-B
Output 2 Output 2
for set value 2
Approx.1s Output 2 Approx.1s

SHOT-C

SHOT-D

Note : When control output 1 is on, the output mode of setting 2 (SHOT - A, B, C, D) is also on and output 1 changes as shown in the above table.

DIMENSIONS

11 PIN, SOCKET MOUNTING TERMINATION

105.0 max.
LCD
89.0
48.0 SQ

LOCK
55.0

H:M:S 1 2

Transparent Cover
5.5
GRID RING

Weight : 150 gms (Unpacked)

Case Material : Lexan 143 gray
Recommended
Panel Cutout : 45.0mm × 45.0mm ±0.1
Overall Dimensions : 105.0 × 48.0 × 48.0

SCREW TERMINATION
LCD
89.0
48.0 SQ

LOCK
55.0

H: M: S 1 2

Transparent Cover
5.5
GRID RING

Weight : 150 gms (Unpacked)

Case Material : Lexan 143 gray
Recommended
Panel Cutout : 45.0mm × 45.0mm ±0.1
Overall Dimensions : 89.0 × 48.0 × 48.0
All dimensions in mm

11
 Digital Hour Meters & Counters

24×48 BEZEL SCREW MOUNT BEZEL

FEATURES
• Easy to read 6-digit LCD.
• Exceptional reliability with in-built nonvolatile
memory (EEPROM) retaining data for 100 years.
• Wide range of supply voltage.
• “Electrical Reset” terminal for Counters and Hour
Meters and “Enable” terminal for Hour Meters.
• Available in 3 different Bezels.
• Low power consumption.

ROUND BEZEL

SPECIFICATIONS

Item Counters Hour Meter

1.Range 999999 99999.9 Hrs
2.Display 6 Digit LCD, 5 mm. height 6 Digit LCD, 5 mm. height
3.Resolution 1 count 0.1 hrs
4.Accuracy ± 1 count at 25°C ±0.2% at 25°C
5.Temperature - 10°C to +50°C (Operating), - 10°C to +50°C (Operating),
- 20°C to +65°C (Storage) - 20°C to +65°C (Storage)
6.Humidity 95% Rh (Non-condensing) 95% Rh (Non-condensing)
7.Protection
IP54 (For front side only) IP54 (For front side only)
class
8.Terminals 1, 2 : Input Supply 3 : Count Input 1, 2 : Input Supply 3 : Enable Input
4 : Reset 4 : Reset
Cat.Ref. ZA2FBx* ZB2FBx* ZC2FBx* ZA1FBx* ZB1FBx* ZC1FBx*
Input
9-32V AC/DC 75-130V AC 190-270V AC 9-32V AC/DC 75-130V AC 190-270V AC
Voltage
Max. Supply 4mA@24VAC 3mA@24VAC
4mA@110VAC 4mA@240VAC 3mA@110VAC 3mA@240VAC
Current 4mA@24VDC 3mA@24VDC
Counting
2Hz (Max) —
Frequency

* x = A / B / C, where A : Round Bezel, B : 24 × 48 Bezel, C : Screw Mount Bezel

12
 Digital Hour Meters & Counters

CONNECTIONS

DIGITAL HOUR METER DIGITAL COUNTER

DIMENSIONS
ROUND BEZEL
+0 5

Black Bezel
Ø4 )

LCD 'U' Clamp

.2

Thumb Nut 4 mm
(2

.
X

1 2

4 3

Recommended Panel Cutout :

27.5
+0.5 +0.5
±0.2 42.5
58.4 37.0 mm x 24.6 mm
47.3 SQ. C/C
2.0
4.0

24 × 48 BEZEL

Thumb Nut 4 mm Black Bezel LCD 'U' Clamp

36.5

1 2
24.0
20.0

4 3

48.0
22.1
44.6
2.0 Recommended Panel Cutout :
+0.5 +0.5
45.5 mm x 23.0 mm

SCREW MOUNT BEZEL

Thumb Nut 4 mm 36.5 Black Bezel LCD 'U' Clamp

+0
Ø4 X)

.2
.5
(2

1 2
31.1
23.5

26.5

4 3

36.1 1.5 35.5

±0.2 2.0
Recommended Panel Cutout :
44.5 C/C
+0.5 +0.5
53.0 37.0 mm x 24.6 mm

All dimensions in mm

Product improvement is a continuous process.

Hence data given in this catalogue is subject to change without intimation. 13
DIGICON

CG International
International Operations of
Crompton Greaves Limited
‘Jagruti’, Kanjurmarg (East),
CG.ID/55/Digicon/3/03

Mumbai (Bombay) - 400 042.(INDIA)

Telephones : +91-22-2578 2451
Direct : +91-22-2577 6524/6649
Fax : +91-22-2577 4066
Email : cgi @ cgl.co.in
Home Page : http://www.cglonline.com/international/