www.swagelok.
com
D istr ibution Manifold
J6 Se r ie s
Extruded stainless steel body rated for
6000 psig (413 bar) working pressure
Compact, versatile manifold for gas
and liquid applications
Fewer potential leak points than
conventional distribution manifolds
Nonrotating
hardened needle
for positive shutoff
Four to eighteen needle valves and
outlet connections
Mounting holes through the manifold
to reduce stress on the piping system
Two-piece knuckle joint enables
nonrotating needle; joint is above
packing, protected from system media
Stainless steel handle with square
drive stem and lock nut to ensure
positive actuation
Stem threads are cold rolled for high
strength and smooth operation; stem
threads above packing are protected
from system media
Shroud protects stem
threads against ingress
of dirt and dust
Choice of packing and bonnet
seal materials
One-piece, integral body
for less weight, fewer leak
points, and more strength
Materials of Construction
Testing
Component
Grade/ASTM Specification
Body, bonnets
316/316L SS/A479
Needles
S17400 SS/A564
condition H1150D
Packing, bonnet seals
PTFE or graphite
Lubricant
Molybdenum disulfide in
hydrocarbon carrier
Bonnet seal rings, gland nuts,
shrouds, stems, glands, handles,
handle lock nuts, handle washers,
locking pins
316 SS
Gland lock nuts
300 series powdered metal SS
Wetted components listed in italics.
Safety back-seating needle seals in
fully open position
Every valve is hydrostatically tested at ambient temperature.
Options and Accessories
Flanged inlet connections available
Antitamper feature available
Bleed/drain valve available
Hydrostatic test certificates complete with full chemical
and physical material certifications available
For these and other options and accessories, contact your
authorized Swagelok sales and service representative.
Pressure-Temperature Ratings
PTFE Seals
Temperature
Working Pressure
F (C)
psig (bar)
End
Connection
Size, in.
1/2 and 3/4
1
Graphite Seals
Temperature
Working Pressure
F (C)
psig (bar)
200 (93)
6000 (413)
200 (93)
6000 (413)
400 (204)
4000 (275)
850 (454)
3000 (206)
200 (93)
3000 (206)
200 (93)
2000 (137)
400 (204)
2000 (137)
850 (454)
1500 (103)
Ordering Information and Dimensions
Dimensions, in inches (millimeters), are for reference only and are subject to change.
2.36
4 holes to suit 1/4 by 1 1/2 in.
long socket head screws
(60.0)
Number
of Outlet
Connections
4
5.35 (136)
7.72 (196)
10.1 (256)
1.75
10
12.4 (316)
(44.5)
12
14.8 (376)
14
17.2 (436)
16
19.6 (496)
18
21.9 (556)
0.63
Inlet
(16.0)
4.33
(110)
Drain
2.36
(60.0)
A
in. (mm)
Outlet
5.51
(140)
Valve orifice0.157 in. (4.0 mm)
Inlet1/2, 3/4, or 1 in. female NPT
Outlets1/4 in. female NPT
Drain1/2 in. female NPT
2.68
(68.0)
Ordering Number
Build a distribution manifold ordering number by combining the designators in the sequence shown below.
J S 4N 2N A T - 10
Series
Number of Outlet Valves and Outlets
Specify a number from 4 to 18.
Example: 10 = 10 valves and outlets
Body Material
316, 316L stainless steel
Handle
Inlet Connection
4N = 1/2 in. female NPT
6N = 3/4 in. female NPT
8N = 1 in. female NPT
Bar handle
Packing and Bonnet Seal Material
A = PTFE
C = Graphite
Outlet Connections
1/4 in. female NPT
A packing adjustment may be
required periodically to increase
service life and to prevent
leakage.
Valves that have not been cycled
for a period of time may have a
higher initial actuation torque.
Safe Product Selection
When selecting a product, the total system design must
be considered to ensure safe, trouble-free performance.
Function, material compatibility, adequate ratings,
proper installation, operation, and maintenance are the
responsibilities of the system designer and user.
Caution: Do not mix or interchange parts with those of
other manufacturers.
To increase service life, ensure
proper valve performance, and
prevent leakage, apply only as
much torque as is required to
achieve positive shutoff.
Warranty Information
Swagelok products are backed by The Swagelok Limited
Lifetime Warranty. For a copy, visit swagelok.com or contact
your authorized Swagelok representative.
SwagelokTM Swagelok Company
20042013 Swagelok Company
Printed in U.S.A., AGS
April 2013, R4
MS-02-214
