PP7554
PP-010-RBG14-QFPKG/US/ /V
Pressure sensors
1: ventilation
2: sealing FPM / DIN 3869-14
Made in Germany
Product characteristics
Electronic pressure sensor
Quick disconnect
Adjustment of the switch point by teach function
Process connection: G A / M5 I
2 outputs
OUT1 = switching output
OUT2 = switching output or diagnostic output
Measuring range: -1...10 bar / -14.5...145 psi / -0.1...1.0 MPa
Application
Application
Type of pressure: relative pressure
Liquids and gases
Pressure rating
75 bar
1087 psi
7.5 MPa
Bursting pressure min.
150 bar
2175 psi
15 MPa
Medium temperature
[C]
-25...90
Electrical data
Electrical design
Operating voltage
DC PNP
[V]
9.6...36 DC )
Current consumption
[mA]
< 45
Insulation resistance
[M]
> 100 (500 V DC)
Protection class
III
Reverse polarity protection
yes
Outputs
Output
2 outputs
OUT1 = switching output
OUT2 = switching output or diagnostic output
Output function
Current rating
Voltage drop
2 x normally open / closed programmable or 1 x normally open / closed programmable
+ 1 x normally closed (diagnostic function)
[mA]
[V]
Short-circuit protection
<2
Yes (non-latching)
Overload protection
Switching frequency
2 x 250
yes
[Hz]
170
PP7554
PP-010-RBG14-QFPKG/US/ /V
Pressure sensors
Measuring / setting range
Measuring range
-1...10 bar
-14.5...145 psi
-0.1...1.0 MPa
Set point, SP
-0.90...10.00 bar
-13...145 psi
-0.090...1.000 MPa
Reset point, rP
-0.95...9.95 bar
-14...144 psi
-0.095...0.995 MPa
0.05 bar
1 psi
0.005 MPa
Setting range
in steps of
Factory setting
SP1 = 2.50 bar; rP1 = 2.30 bar
SP2 = 7.50 bar; rP2 = 7.30 bar
OUT1 = Hno; OUT2 = Hno
Accuracy / deviations
Accuracy / deviations
(in % of the span)
Switch point accuracy
< 0.5
Characteristics deviation *)
< 0.25 (BFSL) / < 0.5 (LS)
Hysteresis
< 0.1
Repeatability **)
< 0.1
Long-term stability ***)
< 0.1
Temperature coefficients (TEMPCO) in the temperature range 0...80 C (in % of the span per 10 K)
Greatest TEMPCO of the zero point
0.2
Greatest TEMPCO of the span
0.2
Reaction times
Power-on delay time
Min. response time switching
output
[s]
0.3
[ms]
Damping for the switching output
(dAP)
[s]
3
0.003 - 0.006 - 0.010 - 0.017 - 0.060 - 0.125 - 0.250 - 0.500
Interfaces
IO-Link Device
Transfer type
COM2 (38.4 kBaud)
IO-Link revision
1.0
IO-Link Device ID
6 d / 00 00 06 h
Profiles
no profile
SIO mode
yes
Required master port class
Process data analogue
Process data binary
Min. process cycle time
[ms]
2.3
Ambient temperature
[C]
-25...85
Storage temperature
[C]
-40...100
Environment
Protection
IP 68 ****) / IP 69K
Tests / approvals
EMC
noise immunity
EN 61000-4-2 ESD:
EN 61000-4-3 HF radiated:
EN 61000-4-4 Burst:
according to EN 61000-6-2
4 kV contact discharge / 15 kV air
discharge
20 V/m
4 kV coupling clamp
PP7554
PP-010-RBG14-QFPKG/US/ /V
Pressure sensors
0.5 kV supply / 1 kV signal for DC
units
10 V
according to the automotive
directive 95/54/EC / 04/104EC /
05/83/EC
EN 61000-4-5 Surge:
EN 61000-4-6 HF conducted:
noise immunity
Absorber chamber test to ISO
11452-2:
EN 50155:
Shock resistance
Vibration resistance
MTTF
80 V/m
class T3, C1, S1
DIN IEC 60068-2-27 / DIN IEC
60068-2-29:
DIN EN 61373:
1000 g
Category 3
DIN IEC 68-2-6:
DIN EN 60068-2-64
DIN EN 61373:
20 g (10...2000 Hz)
14 g
Category 2
[Years]
310
Mechanical data
Process connection
G A / M5 I
Materials (wetted parts)
stainless steel (303S22); ceramics; FPM (Viton)
Housing materials
stainless steel (304S15); FPM (Viton); EPDM/X (Santoprene); PA
Switching cycles min.
100 million
Weight
[kg]
0.227
Displays / operating elements
Display
Power
2 x LED green
Switching status 2 x LED yellow
Electrical connection
Connection
M12 connector
Wiring
----------OUT1/Teach/Data---------data channel for bidirectional communication
in addition:
switching signal for pressure limit value or
input for teach signal
----------OUT2---------switching signal for pressure limit value or
diagnostic signal
Remarks
Remarks
Pack quantity
) supply voltage for communication mode: 18...32 V DC
referring to UL: limited voltage with overcurrent protection in
accordance with UL508
*) BFSL = Best Fit Straight Line / LS = Limit Value Setting
**) with temperature fluctuations < 10 K
***) in % of the span per year
****) 7 days / 1 m water depth / 0.1 bar
e1 approval on request
[piece]
ifm efector, inc. 782 Springdale Drive, Exton, PA 19341 We reserve the right to make technical alterations without prior notice. US PP7554 30.10.2013
