802.
11b Wireless Client Bridge/
Access Point
EL-2611CB3+ Deluxe
The EL-2511CB3+ Deluxe incorporates advanced high
powered technology to increase signal strength and through-
put. This, with its removable antenna and PoE support, creates
a flexible total solution for SI, Enterprise, SMB, and various Field
Applications. Multiple networks can be connected using the
built-in bridging function allowing connection speeds rivaling
that of a T1 line. Any ethernet capable device can be
wirelessly connected to an accesspoint through the EL-
2611CB3+ Deluxe without the need to install any drivers onto
your computer simplifying setup.
Specifications
Features: RF Information:
• Up to 23dBm(200mW) RF Output Power • Frequecy Band: 2.4~2.484Ghz
• Up to 9 times coverage • Radio Type: Direct Sequence Spread Spectrum(DSSS)
• Multi-Client Bridge Functionality • Operation Channel: 11 for North America
• Fully interoperable with IEEE 802.11b compliant devices • Modulation:
• Point-to-Point, Point-to-Multipoint Wireless Connectivity 11Mbps/5.5Mbps CCK 2Mbps: DQPSK
• Allows data-transfer between two or more networking cells 1Mbps: DBPSK
• True Plug and Play *No drivers needed, easy and quick to connect • RF Connector: TNC Female-Reverse
• RF Output Power(Typical): 21 ± 2dBm @ 1, 2, 5.5, 11Mbps
your Ethernet device to your Wireless Network
• WEP data encryption: 64/128-bit
• Power-over-Ethernet and Access Point
• 64/128-bit WEP data encryption–Powerful data security
• Hide SSID(AP Mode) Avoids unauthorized users to share bandwith, Network:
increasing efficiency within the network • Topology: Point-to-Point/Point-to-Multipoint Infrastructure
• DHCP Client simplifies network administration • Interface: One 10Base-T Mbps RJ-45 LAN Port
• Web-based configuration helps administrators to remotely configure • Filmware Upgrade: via web browser
or manage the Multi-Client Bridge with a web browser • Security:
• MAC address filtering(AP Mode) Ensures secure network connection MAC address filtering(AP mode)
WEP encryption (64/128-bit)
• Seamless Roaming allowing users to travel between Access Points
without losing their network connection Layer 2 isolation
Hide SSID in beacons, stations cannot use
“any” SSID(AP mode)
General: • IP Auto-configuration: DHCP client
• Data Transfer Rates: 11, 5.5, 2, and 1Mbps with Auto-Fall Back
• Regulation Certifications: FCC Part 15/UL, ETSI 300/328/CE
• Power Supply: 110VDC ± 10% Environment:
• Device: 12V/1A • Temperature Range:
Operating: 0ºC to 45ºC
Storage: -40ºC to 70ºC
• Humidity (non-condensing):
Physical Specifications: 5%~95% Typical
• Dimensions: 125(L)mm x 108(W)mm x 31(H)mm
• Weight: 350g (0.8 lbs)
• Status LED’s:
LAN: Link
Package Content:
• 1x EL-2611CB3+ Deluxe
WLAN: Link
• 1x Power Adapter
Power: On/Off
• 1x CAT5 UTP Cable
• 1x Quick Start Guide
• 1x CD-ROM with User’s Manual
*All specifications are subject to change by EnGenius without prior notice*
1580 Scenic Avenue Tel: 714.432.8668
Costa Mesa, CA 92626 Fax: 714.432.8667
Toll Free: 888.735.7888 www.engeniustech.com
© 2 0 0 5 , E n G e n i u s Te c h n o l o g i e s I n c , P r o p r i e t a r y & C o n f i d e n t i a l
