Technical Data Sheet
Halar300DA
ethylene chlorotrifluoroethylene copolymer
Halar "DA" grades are available and meet the FDA's
Condition of Use B, as described under 21 C.F.R.
176-170(c).
General
Material Status
Commercial: Active
Availability
Africa & Middle East
Asia Pacific
Features
Medium Viscosity
Agency Ratings
FDA 21 CFR 176.170(c) Condition of Use B
Forms
Pellets
Processing Method
Extrusion
Physical
Europe
Latin America
North America
Powder
Typical Value Unit
Specific Gravity
1.68
Test method
ASTM D792
Melt Mass-Flow Rate (MFR) (275C/2.16 kg)
2.0 g/10 min
Molding Shrinkage - Flow
2.5 %
ASTM D955
< 0.10 %
ASTM D570
Water Absorption (Equilibrium)
Mechanical
ASTM D1238
Typical Value Unit
Test method
1660 MPa
ASTM D638
Tensile Modulus1 (23C)
ASTM D638
Tensile Strength
Yield, 23C
Break, 23C
30.0 MPa
54.0 MPa
Tensile Elongation1
Yield, 23C
Break, 23C
5.0 %
250 %
ASTM D638
Flexural Modulus2 (23C)
1690 MPa
ASTM D790
Flexural Strength (23C)
47.0 MPa
ASTM D790
Coefficient of Friction
vs. Itself - Dynamic
vs. Itself - Static
0.20
0.20
ASTM D1894
Taber Abrasion Resistance
1000 Cycles, 500 g, CS-17 Wheel
Impact
Notched Izod Impact
-40C, 3.20 mm
23C, 3.20 mm
Hardness
5.00 mg
Typical Value Unit
Test method
ASTM D256
210 J/m
No Break
Typical Value Unit
Test method
Rockwell Hardness (R-Scale)
90
ASTM D785
Durometer Hardness (Shore D)
75
ASTM D2240
Revised: 9/10/2014
Solvay Specialty Polymers
Page: 1 of 2
Halar300DA
ethylene chlorotrifluoroethylene copolymer
Thermal
Typical Value Unit
Deflection Temperature Under Load
0.45 MPa, Unannealed
1.8 MPa, Unannealed
Test method
ASTM D648
90.0 C
65.0 C
Brittleness Temperature
< -76.0 C
ASTM D746A
Glass Transition Temperature
85.0 C
DMA
Melting Temperature
242 C
ASTM D3418
Peak Crystallization Temperature (DSC)
222 C
ASTM D3418
CLTE - Flow
1.0E-4 cm/cm/C
ASTM D696
Specific Heat (23C)
962 J/kg/C
ASTM D3418
Thermal Conductivity (40C)
0.15 W/m/K
ASTM C177
Crystallization Heat
40.0 J/g
ASTM D3418
Heat of Fusion
42.0 J/g
ASTM D3418
Thermal Stability - 1% mass loss, N2
405 C
TGA
Electrical
Typical Value Unit
3
Test method
5.5E+16 ohmscm
Volume Resistivity (23C)
Dielectric Strength (23C, 3.20 mm)
ASTM D257
14 kV/mm
Dielectric Constant (23C, 1 MHz)
ASTM D149
2.57
Flammability
Typical Value Unit
Flame Rating
ASTM D150
Test method
V-0
Oxygen Index
52 %
UL 94
ASTM D2863
Notes
Typical properties: these are not to be construed as specifications.
1
50 mm/min
2.5 mm/min
50% RH
SpecialtyPolymers.EMEA@solvay.com
| Europe, Middle East and Africa
| Americas
SpecialtyPolymers.Americas@solvay.com
SpecialtyPolymers.Asia@solvay.com
| Asia and Australia
Safety Data Sheets (SDS) are available by emailing us or contacting your sales representative. Always consult the appropriate SDS before using any of
our products.
Neither Solvay Specialty Polymers nor any of its affiliates makes any warranty, express or implied, including merchantability or fitness for use, or accepts
any liability in connection with this product, related information or its use. Some applications of which Solvays products may be proposed to be used
are regulated or restricted by applicable laws and regulations or by national or international standards and in some cases by Solvays recommendation,
including applications of food/feed, water treatment, medical, pharmaceuticals, and personal care. Only products designated as part of the Solviva
family of biomaterials may be considered as candidates for use in implantable medical devices. The user alone must finally determine suitability of any
information or products for any contemplated use in compliance with applicable law, the manner of use and whether any patents are infringed. The
information and the products are for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in
combination with any other substance or any other process. This is not a license under any patent or other proprietary right.
All trademarks and registered trademarks are property of the companies that comprise the Solvay Group or their respective owners.
2015 Solvay Specialty Polymers. All rights reserved.
