GAGEMAKER CATALOG

Calibration Equipment
Large Diameter Measurement
Thread Measurement
API and Premium Gages

PRODUCT INFORMATION

2
Gagemaker, Inc. is a Houston-based manufacturer of precision
mechanical inspection equipment for the Quality Control industry.
We have provided quality gauging equipment to the oilfield,
automotive and general machining industries since 1982.
Today, Gagemaker is recognized as a leader in the fields of:

Calibration Equipment
Large Diameter Measurement
Thread Diameter Measurement
API and Premium Gages

We market and sell our products to over 35 countries around the

world. Our employees pride themselves on problem solving and
continuous product improvement. The result of these efforts is
supplying our customers with the best products and service
possible.
Our catalog provides a detailed listing of the products available. As
you browse through this book, you will find we are a complete
source for all your quality needs.

PRODUCT WARRANTY
GAGEMAKER warrants its products to be free from defects in material and workmanship for one year from
the date of shipment. At our option, we will repair or replace any defective product upon return, prepaid,
properly packed to our factory in Pasadena, Texas. This warranty applies to all products when used in a
normal industrial environment. Any unauthorized tampering, misuse or neglect will make this warranty null
and void. Under no circumstances will GAGEMAKER or any affiliate have any liabilities for loss or for any
indirect or consequential damages. The foregoing warranties are in lieu of all other warranties expressed or
implied, including but not limited to, the implied warranties of merchantability and fitness for a particular
purpose.

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

Calibration
Equipment

Threaded Plug

Tapered Plug

Cylindrical Plug

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Due to the versatility, our Calibration Equipment is

widely used throughout the inspection industry.
The MIC TRAC measurement center combines
accuracy with flexibility to ideally adapt to the shop floor
or to the quality lab. The proven accuracy makes the
MIC TRAC a perfect choice for part inspection and
serves as a setting master for gages produced by
leading gage manufacturers. The unit comes in several
lengths as well as different accuracies. Our MT-3000
series provides tolerance of .0001" and our MT-4000
series provides tolerance of .00003".
Customers who have implemented an in-house
calibration system with the MIC TRAC not only realize a
substantial savings, but achieve greater control over
the inspection of their gauging equipment.

4
GAGE SETTING SYSTEM
This package features the MIC TRAC as a multi-use gage setting system. The system sets or zeros most
gages with the use of interchangeable anvils or blocks. Standard resolution of base unit is .00005".
Accuracies range from .0001" to .0004". (MT CPU is CE approved.)
MIC TRAC base unit w/ range: 0" to 12" with TF-1F blocks and shipping carton
MT-3012-50

MT-3012-50

BASIC GAGE SETTING SYSTEM

GAGE SETTING SYSTEM OPTIONS

Expand or upgrade the basic gage setting system with the addition of other accessories and setting blocks.
Model No.
Description
Unit Price

MT-CPU

OTHER BASE UNITS (Includes TF-1F block set)

TF-1F

TAPERED SETTING
BLOCKS

MT-3012-50

MIC TRAC base unit w/ range: 0" to 12" internal, 1" to 13" external

MT-3024-50

MIC TRAC base unit w/ range: 0" to 24" internal, 1" to 25" external

MT-3036-50

MIC TRAC base unit w/ range: 0" to 36" internal, 1" to 37" external

MT-3048-50

MIC TRAC base unit w/ range: 0" to 48" internal, 1" to 49" external

MT-FL

Force-Lok Option

TAPERED CYLINDER SETTING BLOCKS (2 block sets)

TF-.5F

TF-10

Tapered setting blocks 10 half angle

TF-15

Tapered setting blocks 15 half angle

TF-20

Tapered setting blocks 20 half angle

TF-30

Tapered setting blocks 30 half angle

TF-45

Tapered setting blocks 45 half angle

SPECIAL PURPOSE SETTING BLOCKS

TF-1A

TF-BX
TF-2A

TF-.5F

Carbide Flat Face Setting Blocks (.750" outside dim.)

TF-1F

Flat face setting blocks (1.500" outside dim.)

TF-BX

23 angled face setting blocks

THREAD GAGE SETTING BLOCKS

TF-1V

1-5 pitch 60 "V" thread setting blocks

TF-2V

6-20 pitch 60 "V" thread setting blocks

TF-1A

2-3 pitch ACME/STUB ACME thread setting blocks

TF-2A

4-20 pitch ACME/STUB ACME thread setting blocks

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

HAND GAGE CALIBRATION SYSTEM

This package features the MIC TRAC as a mufti-use gage calibration system. The system uses interchangeable
anvils to calibrate a variety of handheld style gages. Through the various configurations of fixtures, the MIC
TRAC achieves an accuracy of .0001" (cumulative per every 12" of travel). Resolution is .00005".
feature to provide
(MT CPU is CE approved.) The standard package incorporates the ForceLok
the operator with a constant anvil force that improves repeatability from operator to operator.

HGC-12-HT-FL

MT-3012-50-FL

HAND GAGE CALIBRATION PACKAGE

Package includes:
MT-3012-50-FL MIC TRAC base unit w/ range: 0" to 12", includes TF-1F blocks and shipping carton.
CAL-PAK, complete calibration fixture package
CRC-MT3000 Calibration Reference Sheets - Calibration procedures for use with CAL-PAK

GAGE CALIBRATION SYSTEM OPTIONS

MT-CPU

The following base units and accessories are available for larger requirements.
Model No.

Description

Unit Price

OTHER PACKAGES
HGC-24-HT-FL

Above calibration package with MT-3024-50F, w/ range 0" to 24"

HGC-36-HT-FL

Above calibration package with MT-3036-50F, w/ range 0" to 36"

HGC-48-HT-FL

Above calibration package with MT-3048-50F, w/ range 0" to 48"

CRC-MT-3000

SYSTEM PRINTER AND PAPER

PRN-100

Electronic printer for hardcopy records

PRN-000

Replacement printer paper

PRN-100

CALIBRATION ACCESSORY BLOCKS AND FIXTURES

CAL-PAK

Complete calibration package

Includes: TF-IND, TF-DG, TF-CA, TF-SA, TF-TI, TF-SV, TF-SS, TF-VN,
TF-MTL, and storage case

TF-IND

AGD dial indicator calibration fixture (includes .375" and 8mm bushing and
TF-2F block)

TF-DG

Calibration fixture for depth micrometer *

TF-CA

Caliper calibration accessory dial, digital and vernier calipers. Includes

TF-SA support arm.

TF-TI

Test indicator calibration block *

PRN-000

TF-SA

TF-CA

TF-SV

"V" Support accessory ** for calibrating micrometers and standards

TF-SS

Straight support accessory * for support of extended probes

TF-VN

"V" blocks for calibration of axial travel probes and bore gages

TF-MTL

Micrometer spindle thread lead calibration fixture.

TF-1F

Flat face setting block set (2 blocks) 1.5000" outside dimension

TF-BA

Base support block for setting dial bore gages **

TF-VB

"V" block fixture for calibration of Gagemaker's TH-3004 and MRP-2002

Upper arms *

TF-LG

Gagemaker lead gage calibration fixture *

TF-ALG

Lead gage calibration fixture *

TF-BI

Base support plate for setting dial bore gages **

TF-TI

TF-MTL
TF-1F
TF-IND

TF-DG
TF-SS

TF-VN

TF-SV

TF-BI

* 1/TF-1F block required with this accessory

** 2/TF-1F blocks required with this accessory

CRC-MT4000

Complete procedural documentation for the calibration of handheld inspection

equipment including; O.D. & I.D. micrometers, calipers, depth micrometers,
ring and plug gages, and more.

CRC-MT3000

Complete procedural documentation for the calibration of handheld inspection

equipment including; O.D. & I.D. micrometers, calipers, depth micrometers,
ring and plug gages, and more.

TF-ALG

TF-VB

TF-LG
TF-BA

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

6
MT-4012-10

PRECISION GAGE CALIBRATION SYSTEM

This package features the MIC TRAC/MT-4000 as a precision calibration system. The system accepts
fixtures that inspect and calibrate a wide range of gage diameters and thread pitches. The package
includes all the equipment necessary to calibrate precision hand held gages. Ring and plug inspection
requires the purchase of additional accessories.
Package includes:

MT-4012-10 MIC TRAC electronic adjustable measurement master, range 0" to 12". Base unit is
segmentally linear error corrected to an accuracy of .00005", resolution .00001 ", travel 12.000".
Ultra precision scale with 1.00" travel, Accuracy .00002", resolution .00001", travel 1.000".
Desktop computer with CCS-9002 Calibration Control Software for Windows installed. Software
has a report writer, a recall database, and a digital data acquisition module. Network compatible.
CRC MT-4000 Calibration Reference Card Set - procedures documenting calibrations with the
Gagemaker system
TF-2R, Carbide anvil set, 3/8" diameter
TF-XYT, Adjustable X,Y & tilt support table for use with the MIC TRAC
CAL-PAK, Assortment of fixtures designed to hold gages for calibration
TDWIN Thread Disk for Windows software program, Provides critical thread dimensions for
manufacturing and inspection of UN, ACME, Stub ACME, Metric, Buttress, and NPT threads.
Torque wrench, 50 in. lb.

AWH-100 Benchtop tool holder with wrenches

Reusable shipping container

TF-XYT

CRC MT-4000

TW-50

PGC-12-W2 PRECISION CALIBRATION PACKAGE

AWH-100

Training Options: Option A: Training at customers facility (per day, plus airfare)
Option B: Training at Gagemakers facility (per day, per person)

ADDITIONAL PACKAGES & CALIBRATION ACCESSORIES

CCS-9002

The following base units and accessories are available for larger requirements.
Model No.

Description

Unit Price

OTHER PACKAGES
TW-50

TF-SB

PGC-24-W2

Above calibration package with MT-4024-10 MIC TRAC

0"-24" range

PGC-36-W2

Above calibration package with MT-4036-10 MIC TRAC

0"-36" range

PGC-48-W2

Above calibration package with MT-4048-10 MIC TRAC

0"-48" range

PRECISION CALIBRATION SYSTEM ACCESSORIES

TDWIN

Thread Disk for Windows software program calculates critical thread

dimensions for manufacturing and inspection of UN, ACME, Stub ACME,
Metric, Buttress, and NPT threads

TF-SB

Adjustable height support table

TF-XYT

Adjustable height, X axis & Y axis support base

TF-WS

Thread wire set for 6,8,10,12,14,16,18,20,24,28,32 pitch "V" threads *

TF-CR

Set of 3 fixtures for measuring cylindrical ring gages and bores.

CR-1 (.170"-.230"), CR-2 (.250"-.875"), CR-3 (.880"-Larger)

TF-CP

Ball contact holders, .500 ID measurement.

TF-IT

Internal threaded ring ball P.D. module (for solid style rings)

TF-2R

3/8" dia. carbide anvil set

TF-TP

Calibration fixture for NPT, NPTF, and ANPT tapered plug gages,
Includes wire for 27, 18, 14, & 11 1/2 pitch threaded plugs.

TF-SP

For holding gage pins vertical.

TF-IT
TF-WS

TF-TP

(* requires TF-2R blocks)

TF-2R

TF-AWH

Allen wrench holder with wrenchs

TW-50

50 in-lb torque wrench w/ 5/32" hex wrench adapter

** Wire holder modules with 1 set of wires from 1.0mm to 4.5mm.

TF-CR

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

ADDITIONAL PACKAGES & CALIBRATION ACCESSORIES

TF-SB

Continued

INDIVIDUAL THREADS WIRE HOLDER MODULES (Are supplied with one set wires-specify pitch)
TF-WHV-XX

60 thread wire holder modules with wires 5 pitch to 48 pitch

TF-WHV-XX

60 thread wire holder modules with wires 1-4 pitch, 56-72 pitch

TF-WHA-XX

29 thread wire holder modules with wires 4 pitch to 20 pitch

TF-WHA-XX

29 thread wire holder modules with wires 2 pitch, 3 pitch

TF-WHM-XX

Metric thread wire holder modules with wires 1.0 mm -4.5mm pitch

TF-WHM-XX

Metric thread wire holder modules with wires .5mm-.8mm, 5mm-6mm pitch

TF-XYT

TW-50

CALIBRATION AND DATA COLLECTION SOFTWARE OPTIONS

INSPEX

Digital readout software with report writer and digital data aquisition module

CCS-9001

Calibration software for Microsoft WindowsTM with recall database, RS-232

interface download utility, and text file editor for inspection report writing.
Customer must supply computer with CD-ROM capable of running
Windows. (CALSPEX & RECALL)

CCS-9002

TF-SP

Gage calibration software for Microsoft WindowsTM with calibration reports,

recall database, and digital data collection module. Customer must supply
computer with CD-ROM capable of running Windows. (CALSPEX,
RECALL & INSPEX)

TF-CR

MIC 360 Basic Package

The basic gage package provides everything to measure external diameters 2" to 360" and internal
diameters 4" to 360" more accurately and repetitively than ever before. This package comes ready
to install on any machine tool that accepts a 1" square tool holder. Other components and options
are listed below.
Model No.

Description

WLGH-100

Internal/external gage head with infrared receiving unit

IRU-100

Infrared receiving unit w/ 20 ft. cable

DSP-300

Computer CPU

OPT-400

Standard optical light switch

OPT-401

Optical light switch mounting bracket

GWL-500-3.75

3.75" Diameter gage wheel

CBL-620

Light switch cable (20 ft.)

LI-BAT

Spare Lithium Ion battery

LI-CHGR

Lithium Ion battery charger

PEL-1600

Heavy duty storage and shipping case

TF-CP

Package Price

CCS-9002

MIC 360 DIAMETER GAGE PACKAGE

Installation and Training

(per day, plus airfare and expenses)

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

MIC-360
BASIC
PACKAGE

Thread
Measurement

The most important factors when threaded parts

must meet engineering specifications, are
accuracy and consistency.
Our line of thread diameter gages inspects the
effects of all thread element variations and pitch
diameter of the threads.
Our functional thread roll gages use matched
sets of precision ground thread rolls that seat in
the threads during inspection. Each set of rolls is
designed to ANSI specifications to measure
unlimited diameters for a specific thread form.
Our pitch diameter gages use matched sets of
precision contact points that seat at the pitch line
of the part during inspection. The contact points
are interchangeable to allow measuring of different
thread pitches.

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

THREAD DISK FOR WINDOWS SOFTWARE

THREAD DIMENSIONS
TDWIN
The Thread Disk for Windows engineering software calculates critical dimensions for threads based
on ANSI tables and formulas. Thread types supported by the program include: UN, UNJ, and UNR
Series, ACME, Stub ACME, Stub ACME Modified I and II, Metric M & MJ, 7 X 45 Buttress, and General
Purpose Pipe Threads.

TDWIN
To generate critical dimensions instantly, enter basic thread information on the Thread Type Entry
screen, such as: thread type, thread class, nominal diameter, and threads per inch. Once the results
are computed, tabs at the bottom of the program allow selection of several types of calculated
information, including dimensions and tolerances for product threads, ring gages, set plugs, plug
gages or Gagemakers Thread Diameter gages.

Thread Disk for

Windows Software

If measuring internal and external shallow taper diameters is a problem, the Ball Mic SET DIM Tool
provides setting dimensions for ball micrometers or Gagemakers BX-1000 groove gage. The program
calculates ball mic settings for any tapered surface geometry.
Other features of the program include the ability to print thread dimension reports, providing a paper
copy of any calculation. These reports provide the same critical dimensions that display in the program.
A multiple calculation window capability is a feature that allows performing several different thread
calculations at the same time. Also, online help is available to answer any questions about the program.

Software Requirements
Windows 95 or higher
4 MB RAM
3 MB of free hard disk space
3.5 disk drive or CD ROM

Thread Type Entry Screen

Features
Uses ANSI tables, formulas, and tolerances
Calculates standard and non-standard product thread diameters from #000 to 99.8
Calculates ANSI ring and plug gage dimensions
Addresses pitches from 1 to 80
Calculates Gagemaker style thread gage setting dimensions
Provides immediate answers to program questions in online help

TDWIN Thread Disk for Windows Software

TDWIN

Thread Disk for Windows software

TDWIN-UP

Upgrade to TDWIN from TD-100, version 4.2.2

TDWIN-LIC5

Floating site license agreement, 5 users

TDWIN-LIC10

Floating site license agreement, 10 users

Thread Dimension Screen

HOW TO ORDER
1.

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Select the software version you

require (new version, upgrade
from any version below 4.2.2,
or a site license).

10
EXTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES
(1 1/2" TO 24" DIAMETERS)
RG-7000

These functional thread inspection, or GO gages, measure external thread diameters. The gages are
adjustable within a size range and use interchangeable thread rolls to measure different pitch threads.
Setting dimensions for the functional pitch diameter gages are provided by the TDWIN Thread Disk for
Windows software package. The software is sold separately. Reference the pages that follow for
specific pitch thread rolls.
Model No.
RG-7000

Description
External thread roll gage

Range
1" to 4"

Unit Price

RG-7001

External thread roll gage

4" to 8"

RG-7002

External thread roll gage

8" to 12"

RG-7003

External thread roll gage

12" to 16"

RG-7004

External thread roll gage

16" to 20"

RG-7005

External thread roll gage

20" to 24"

INTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES

(1 1/2" TO 24" DIAMETERS)
Gagemaker also manufactures functional thread inspection gages that inspect internal threads. The
gages are adjustable within a size range and use interchangeable thread rolls to measure different pitch
threads.

PG-6000

Model No.

Description

Range

PG-6000

Internal thread roll gage

PG-6001

Internal thread roll gage

9" to 16"

PG-6002

Internal thread roll gage

16" to 24"

PG-6000-SA

Replacement arm set

2" reach

PG-6000-XA

Extended reach arm set

4" reach

Unit Price

1" to 9" dia., 2" reach

DEEP BORE INTERNAL THREAD GAGE

DPG-6000

Deep bore thread roll gage assembly

3" to 4.300" dia., 6" reach

DPG-8R

Handle extension assembly

8" reach

DPG-12R

Handle extension assembly

12" reach

DPG-2

Diameter extension arm

4.300" to 5.100" dia.

DPG-3

Diameter extension arm

5.100" to 5.900" dia.

DPG-4

Diameter extension arm

5.900" to 6.700" dia.

DPG-5

Diameter extension arm

6.700" to 7.500" dia.

DPG-6

Diameter extension arm

7.500" to 8.300" dia.

DPG-7

Diameter extension arm

8.300" to 9.600" dia.

*Prices do not include roll set

DPG-6000

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

UN SERIES THREAD ROLLS

(For gages on previous page)

"TRV" thread rolls inspect the functional fit of machine threaded parts with 60 "V" threadforms. These thread
rolls are designed specifically for internal or external applications. Rolls are sold in matched sets (2 rolls).
Specify the pitch of thread when ordering.
INTERNAL THREAD DIAMETERS
(1" to 24")
Model No.
Description
Price/Set

EXTERNAL THREAD DIAMETERS

(1" to 24")
Model No.
Description
Price/Set

TRVI-4P
TRVI-5P
TRVI-6P
TRVI-8P
TRVI-10P
TRVI-12P
TRVI-14P
TRVI-16P
TRVI-18P
TRVI-20P

TRVE-4P
TRVE-5P
TRVE-6P
TRVE-8P
TRVE-10P
TRVE-12P
TRVE-14P
TRVE-16P
TRVE-18P
TRVE-20P

4 pitch internal 60 "V"

5 pitch internal 60 "V"
6 pitch internal 60 "V"
8 pitch internal 60 "V"
10 pitch internal 60 "V"
12 pitch internal 60 "V"
14 pitch internal 60 "V"
16 pitch internal 60 "V"
18 pitch internal 60 "V"
20 pitch internal 60 "V"

4 pitch external 60 V
5 pitch external 60 "V"
6 pitch external 60 "V"
8 pitch external 60 "V"
10 pitch external 60 "V"
12 pitch external 60 "V"
14 pitch external 60 "V"
16 pitch external 60 "V"
18 pitch external 60 "V"
20 pitch external 60 "V"

ACME AND STUB ACME THREAD ROLLS

HOW TO ORDER
1.

Select the PG-6000 (internal

threads) or RG-7000 (external
threads) series gage model,
based on the range of
diameters being measured.

2.

Select the thread roll model,

based on the thread form (not
included in price of gage).
Specify the pitch.

(For gages on previous page)

"TRA and TRSA thread rolls inspect the functional fit of parts with 29 ACME and Stub ACME
threadforms. Specify the pitch of thread when ordering.
STUB ACME
ACME
THREAD DIAMETERS
THREAD DIAMETERS
(1" to 24")
(1" to 24")
Model No.
Description
Price/Set
Model No.
Description
Price/Set
TRA-3P
TRA-4P
TRA-5P
TRA-6P
TRA-8P
TRA-10P
TRA-12P
TRA-14P
TRA-16P
TRA-18P

TRSA-3P
TRSA-4P
TRSA-5P
TRSA-6P
TRSA-8P
TRSA-10P
TRSA-12P
TRSA-14P
TRSA-16P
TRSA-18P

3 pitch ACME
4 pitch ACME
5 pitch ACME
6 pitch ACME
8 pitch ACME
10 pitch ACME
12 pitch ACME
14 pitch ACME
16 pitch ACME
18 pitch ACME

ISO METRIC SERIES THREAD ROLLS

3 pitch Stub ACME

4 pitch Stub ACME
5 pitch Stub ACME
6 pitch Stub ACME
8 pitch Stub ACME
10 pitch Stub ACME
12 pitch Stub ACME
14 pitch Stub ACME
16 pitch Stub ACME
18 pitch Stub ACME

(For gages on previous page)

TRM thread rolls inspect the functional fit of machine threaded parts with ISO metric 60 "V" threadforms.
INTERNAL THREAD DIAMETERS

EXTERNAL THREAD DIAMETERS

(38.1mm to 609.6mm)

Model No.

Description

TRMI-4P
TRMI-35P
TRMI-3P
TRMI-25P
TRMI-2P
TRMI-175P
TRMI-15P

4mm pitch
3.5mm pitch
3mm pitch
2.5mm pitch
2mm pitch
1.75mm pitch
1.5mm pitch

(38.1mm to 609.6mm)

Price/Set

Model No.

Description

TRME-4P
TRME-35P
TRME-3P
TRME-25P
TRME-2P
TRME-175P
TRME-15P

4mm pitch
3.5mm pitch
3mm pitch
2.5mm pitch
2mm pitch
1.75mm pitch
1.5mm pitch

Price/Set

NATIONAL 7 x 45 BUTTRESSTHREAD ROLLS

"TRB" thread rolls inspect the functional fit of parts with 7 x 45 buttress threadforms. Specify the
pitch of thread when ordering.

Model No.

THREAD DIAMETER
(1" to 24")
Description

TRB745-2P
TRB745-3.5P
TRB745-4P
TRB745-6P
TRB745-8P
TRB745-10P
TRB745-12P
TRB745-16P

2 pitch, 7x 45
3.5 pitch, 7x 45
4 pitch, 7x 45
6 pitch, 7x 45
8 pitch, 7x 45
10 pitch, 7x 45
12 pitch, 7x 45
16 pitch, 7x 45

Specials - All other threadforms

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

THREAD ROLLS

Price/Set

Price Available On Request

12
SMALLER DIAMETER THREAD INSPECTION GAGES
5/8" (.625) TO 1" (1.500) DIAMETERS
This line of thread inspection gages measures thread diameters smaller than 1.500".
SPG-6000

Model No.

Description

SRG-7000

Range

External Thread Roll/Pitch Diameter Gage

SPG-6000

Internal Thread Roll/Pitch Diameter Gage

SPR-BASE

Benchmount stand

Unit Price

5/8" to 1"
5/8" to 1"
Internal/External

UN SERIES THREAD ROLLS

"SRV" thread rolls inspect the functional fit of machine threaded parts with 60 "V" threadforms. These
thread rolls are designed specifically for internal or external applications. Rolls are sold in matched sets (2
rolls). Specify the pitch of thread when ordering.
INTERNAL THREAD DIAMETERS
(.750 to 1.500)

SRG-7000

Model No.
SRVI-6P

Description
6 pitch internal 60 "V"

SRVI-7P
SRVI-8P

EXTERNAL THREAD DIAMETERS

(.625 to 1.500)

Price/Set

Model No.
SRVE-6P

Description
6 pitch external 60 "V"

7 pitch internal 60 "V"

SRVE-7P

7 pitch external 60 "V"

8 pitch internal 60 "V"

SRVE-8P

8 pitch external 60 "V"

SRVI-9P

9 pitch internal 60 "V"

SRVE-9P

9 pitch external 60 "V"

SRVI-10P

10 pitch internal 60 "V"

SRVE-I0P

10 pitch external 60 "V"

SRVI-11P

11 pitch internal 60 "V"

SRVE-11P 11 pitch external 60 "V"

SRVI-12P

12 pitch internal 60 "V"

SRVE-12P 12 pitch external 60 "V"

SRVI-13P

13 pitch internal 60 "V"

SRVE-13P 13 pitch external 60 "V"

SRVI-14P

14 pitch internal 60 "V"

SRVE-14P 14 pitch external 60 "V"

SRVI-16P

16 pitch internal 60 "V"

SRVE-16P 16 pitch external 60 "V"

SRVI-18P

18 pitch internal 60 "V"

SRVE-18P 18 pitch external 60 "V"

SRVI-20P

20 pitch internal 60 "V"

SRVE-20P 20 pitch external 60 "V"

SRVI-24P

24 pitch internal 60 "V"

SRVE-24P 24 pitch external 60 "V"

SRVI-28P

28 pitch internal 60 "V"

SRVE-28P 28 pitch external 60 "V"

SRVI-32P

32 pitch internal 60 "V"

SRVE-32P 32 pitch external 60 "V"

Price/Set

ISO METRIC THREAD ROLLS

"SRM" thread rolls inspect the functional fit of machine threaded parts with 60 ISO metric threadforms.
These thread rolls are designed specifically for internal or external applications. Rolls are sold in matched
sets (2 rolls). Specify the pitch of thread when ordering.
INTERNAL THREAD DIAMETERS
(16mm to 38mm)
Model No.
Description
Price/Set

EXTERNAL THREAD DIAMETERS

(16mm to 38mm)
Model No.
Description
Price/Set

SRM14P
SRMI-35P
SRMI-3P
SRMI-25P
SRMI-2P
SRMI-175P

SRME-4P
SRME-35P
SRME-3P
SRME-25P
SRME-2P
SRME-175P

4mm pitch
3.5mm pitch
3mm pitch
2.5mm pitch
2mm pitch
1.75mm pitch

4mm pitch
3.5mm pitch
3mm pitch
2.5mm pitch
2mm pitch
1.75mm pitch

EXTERNAL THREAD SUPPORT ROLLS

External thread diameters smaller than .500 require alternative diameter support rolls.
Model No.
ISO METRIC ROLLS

97.00
SP-2
SP-1

Description

Price/Set

For diameters smaller than .625" to .500" (.437 dia. roll)

For diameters .625 and larger (Stock .385 dia. roll shipped with gage)
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

PITCH DIAMETER CONTACT POINT ARMS (For gages on page 13)

HOW TO ORDER
1.

Select the SP6-6000 (internal

threads) or SRG-7000 (external
threads) series gage model
based on the range of
diameters being measured.

2.

Select the thread contact point

size, based on the thread form
(not included in price of gage).
Specify the pitch.

"SPA" contact point arms hold "SP" contact points for internal and external pitch diameter measurements.
INTERNAL AND EXTERNAL
Model No.

Description

SPA-265
SPA-375
SPA-437

Price/Set

.265" dia., 1" long

.375" dia., 1.25" long
.437" dia., 1.50" long

PITCH DIAMETER CONTACT POINTS (For gages on page 13)

Gagemakers standard ball contact points are manufactured with spherical chrome contact balls. Standard
contact diameters are held to tolerances of .00005. "SP" contact points fit "SPA" contact point arms only.
Contact sizes are matched closely to thread inspection wire sizes. These contact sizes are used in the
TDWIN Thread Disk for Windows software program.
UN, INTERNAL AND EXTERNAL
Model No.

Description

Unit Price

Model No.

ACME/STUB ACME
Description

SP-105

5 pitch

SP-105T

5 pitch

SP-096

6 - 7 pitch

SP-090T

6 pitch

SP-072

8 - 9 pitch

SP-062T

8 pitch

SP-057

10 pitch

SP-050T

10 pitch

SP-050

11.5 - 12 pitch

SP-041T

12 - 14 pitch

SP-041

13 -16 pitch

SP-032T

16 pitch

SP-032

18 - 20 pitch

Model No.

INTERNAL AND EXTERNAL METRIC

Thread Pitch

SP-105

4.5 - 4.75mm pitch

SP-096

4 - 4.25mm pitch

SP-072

3.5 - 3mm pitch

SP-057

2.5mm pitch

SP-041

1.5 - 2mm pitch

SP-032

1 - 1.25mm pitch

Unit Price

CONTACT POINT ARMS

(Points not included in price of arms)

Unit Price

PD-8001

EXTERNAL PITCH DIAMETER INSPECTION GAGES

(0" TO 72" DIAMETERS)
The ball pitch diameter gages or "NO GO" gages indicate the pitch diameter size of the products external
thread. The gages are adjustable within a size range and use interchangeable contact points to measure
different pitch threads. Setting dimensions for the pitch diameter gages are provided by the TDWIN Thread Disk
for Windows software package. The software is sold separately. Reference this page for specific pitch contact
points.
Model No.
PD-8001

Description
External ball pitch diameter gage

PD-8002

External ball pitch diameter gage

6" to 12"

PD-8004

External ball pitch diameter gage

12" to 16"

PD-8006

External ball pitch diameter gage

16" to 20"

PD-8008

External ball pitch diameter gage

20" to 24"

PD-8010

External ball pitch diameter gage

24" to 28"

PD-8012

External ball pitch diameter gage

28" to 36"

PD-8013

External ball pitch diameter gage

36" to 44"

PD-8014

External ball pitch diameter gage

44" to 52"

PD-8015

External ball pitch diameter gage

52" to 60"

PD-8016

External ball pitch diameter gage

60" to 72"

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Range
0" to 6"

Unit Price

PD-8013

14
INTERNAL PITCH DIAMETER INSPECTION GAGES
(1 " TO 24" DIAMETERS)
PD-5104

The ball pitch diameter gages or "NO GO" gages indicate the pitch diameter size of the products internal
thread. The gages are adjustable within a size range and use interchangeable thread rolls and contact
balls to measure different pitch threads.
Model No.
PD-5104
PD-6000
PD-6000-07
PD-6001

Description

Range

Internal pitch diameter gage ("V" threads only)

1" to 9"

Internal pitch diameter gage ("V" & ACME)

DB-1800

1" to 9"

Replacement arm set

4" length

Internal pitch diameter gage

6" to 24"

PD-6001-24E

Internal pitch diameter gage extension rod

24"

PD-6001-36E

Intemal pitch diameter gage extension rod

36"

DB-1800

Internal deep reach bore gage

18" reach min. bore travel 1.700"

DB-2400

Internal deep reach bore gage

24" reach min. bore travel 1.700"

PD-6001 Replacement Parts

PD-6000

Unit Price

(Extensions have #10-32 threads.)

MODEL NO.

DESCRIPTION

LENGTH

PD-6001-PD4C
PD-6001-PD4M

Cap - CDI Indicator

Cap - Mitutoyo Indicator

PD-6001-PD3

Adjustment cap lock nut

PD-6001-PD2

Adjustment cap

PD-6001-PD1

Contact point adapter

PD-6001-PDA

Extension rod

PD-6001-PDB

Extension rod

.860"

PD-6001-PDC

Extension rod

1.290"

PD-6001-PDD

Extension rod

1.720"

PD-6001-PDE

Extension rod

3.440"

PD-6001-PDF

Extension rod

5.590"

PD-6001-PDG

Extension rod

7.740"

PD-6001-PDH

Extension rod

10.320"

UNIT PRICE

.430"

CONTACT POINTS
Gagemaker's standard ball contact points are manufactured with spherical chrome contact balls.
Threaded shanks are #4-48 UNF. Contact sizes are matched closely to thread inspection wire sizes.
The contact diameters listed are used in the TDWIN Thread Disk for Windows software program for
pitch diameter inspection.

UN SERIES(60 V) THREADS
Model No.
Thread Pitch Chrome Price Carbide Price
Chrome/Carbide
(each)
(each)

PD-6001

Model No.
Thread Pitch
Chrome/Carbide

T562

T096/T096C

T288

T072/T072C

T188/T188C

T057/T057C

10

T188/T188C

3.5

T050/T050C

11.5

T144/T144C

T050/T050C

12

T128/T128C

4.5

T041/T041C

14

T115/T115C

T041/T041C

16

T105/T105C

5.5

T032/T032C

18

Chrome Price Carbide Price

(each)
(each)

ACME OR STUB ACME THREADS

CONTACT POINTS

Model No.
Thread Pitch Chrome Price Carbide Price
Chrome/Carbide
(each)
(each)

Model No.
Thread Pitch
Chrome/Carbide

T531T

T105T / T105TC

T344T

1.5

T090T / T090TC

6,7

T266T

T062T / T062TC

T219T

2.5

T050T / T050TC

10

T188T/T188TC

T041T / T041TC

12

T144T/T144TC

3.5

T041T / T041TC

14

T128T/T128TC

T032T / T032TC

16

Chrome Price Carbide Price

(each)
(each)

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

THREAD LEAD GAGE

LG-5002

The Gagemaker lead gage inspects both internal and external thread leads. The three point lead gage
provides a stable base and requires no sweeping. When used as a two point gage, lead accuracy is
checked with a side to side sweeping motion.
Model No.

Description

Range

LG-5002
LG-5003

2Pt. Lead gage

3Pt. Lead gage

" - 4" Thread leads

" - 4" Thread leads

Unit Price

THREAD
LEAD GAGE
STANDARD

LEAD GAGE SETTING STANDARDS

LG-5003

Gagemakers precision lead gage setting standards are manufactured in accordance with ANSI
specification. Lead gage standards are used to preset the location of the lead gage contact point prior to the
inspection of the threaded part.
Model No.

Description

Range

STD-5001

Lead standard

1 - 5 pitch / 4" length max.

STD-5002

Lead standard

6 - 18 pitch / 4" length max.

STD-5003

Lead standard

1 - 5 pitch / 1 length max.

STD-5004

Lead standard

6 - 18 pitch / 1" length max.

STD-5005

Lead standard

Odd pitch / 4" length max.

Unit Price

TH-3001PD

THREAD HEIGHT GAGES

Gagemaker manufactures precision thread height gages.
Model No.

Description

Unit Price

TH-3001PD

External thread depth gage, UN, ACME,Stub ACME (.196 travel)

TH-3009PD

Internal thread depth gage, UN, ACME,Stub ACME (.250 travel)

TH-3009PD

THREAD PROFILE GAGES

Gagemaker manufactures precision thread profile gages for the quick identification of product threadforms.
Specify the pitch of the thread to be inspected when ordering. Special form profiles are available and are
quoted upon request.
Model No.

Description

TP-UNI-XXP

Internal UN series thread profile gage

Unit Price

TP-UNE-XXP

External UN series thread profile gage

TP-GPA-XXP

Internal/external general purpose ACME thread profile gage

TP-SA-XXP

Internal/external Stub ACME thread profile gage

TP-MI-XXP

Internal ISO Metric series thread profile gage

TP-ME-XXP

External ISO Metric series thread profile gage

THREAD
PROFILES

Overlays for above profile gages

FACE GROOVE AND HOLE LOCATION GAGES

BX-1000

Gagemakers face groove gages inspect groove diameters and groove widths. Excellent for hole location
inspections.
Model No.
BX-1000

Description

Unit Price

Groove diameter gage

Grooves diameters to 13"

BXG-1000

Groove width gage

Groove widths, .376" - 1.5"

BXG-1002

Groove width gage

Groove widths, 2.0"

BX-R13

Optional extension rod for BX-1000, 13"

Groove diameters to 13"

BX-R24

Optional extension rod for BX-1000, 24"

Groove diameters to 25"

BX-R30

Optional extension rod for BX-1000, 30"

Groove diameters to 31"

BX-R36

Optional extension rod for BX-1000, 36"

Groove diameters to 37"

BXG-1000

EXTENSION RODS

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

16

API and
Premium
Gages

Gagemaker's line of API products includes gages

required by API for inspection of threaded tubular
goods. Our products include: pitch diameter gages,
lead gages, taper gages, thread height gages, flange
groove gages, and setting standards. We also offer API
industry related products that include additional
element gages designed for specific customer
requirements. These gages have been used in the
OCTG industry since 1980 and are seen in most
facilities that manufacture or inspect oilfield products.
Our premium gages are used to inspect non-industry
standard connections designed by proprietary
threaders. Many of our premium connection gages
have been adopted as the industry standard by these
threaders. The MRP gage is approved for API's new
SR-22 connection.

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

GAGE SETTING MASTERS

MIC TRAC ELECTRONIC ADJUSTABLE SETTING MASTER
The MIC TRAC setting master is a multi-function gauging unit that sets and calibrates most gages. The unit
utilizes replaceable setting blocks for the particular taper connection being inspected. One set of
taper blocks covers all connections that have that taper. The base unit adjusts the blocks to
predetermined locations for setting the MRP pitch diameter gages. Calculated setting dimensions for all
standard API connections are provided with the MIC TRAC. (MT CPU is CE approved.)
MODEL NO.

DESCRIPTION

MT-3012-50

MIC TRAC Base Unit w/ TF-1F Blocks

MT-3024-50

MIC TRAC Base Unit w/ TF-1F Blocks

MT-3036-50

MIC TRAC Base Unit w/ TF-1F Blocks

PRN-100
PRN-000

Electronic Printer
Replacement Printer Paper

RANGE

MT-3012-50

UNIT PRICE

0" to12" Internal

1" to 13" External
0" to 24" Internal
1" to 25" External
0" to 36" Internal
1" to 37" External
Optional
Optional

MT-CPU

MIC TRAC SETTING BLOCKS

The MIC TRAC setting blocks are replaceable anvils that have an accurate taper ground into the gauging
surfaces. The setting blocks are supplied in sets of 2 and mount on the MIC TRAC receiver blocks.
MODEL NO.

DESCRIPTION

TF-1F

Flat Face Setting Blocks, No taper (supplied with MIC TRAC)

TF-STR

Straight Blocks

TF-.75T

3/4" Taper Blocks, 8 & 10 Round, 3/4" TPF Buttress, Line Pipe

TF-1.0T

1" Taper Blocks, 1" TPF Buttress

TF-1.12T

1 1/8" Taper Blocks, 1.125 TPF Connectors

TF-1.25T

1 1/4" Taper Blocks, 1.25 TPF Connectors

TF-1.25RSC

1 1/4" Taper Blocks, 1.25 TPF Rotary Shouldered Connectors

TF-1.75T

1 3/4" Taper Blocks, 1.75 TPF Connectors

TF-2.0T

2" Taper Blocks, 2.0 TPF Connectors

TF-2.0RSC

2" Taper Blocks, 2.0 TPF Rotary Shouldered Connectors

TF-3.0T

3" Taper Blocks, 3.0 TPF Connectors

TF-3.0RSC

3" Taper Blocks, 3.0 TPF Rotary Shouldered Connectors

UNIT PRICE
PRN-100

PRN-000

TF-1F

TAPER BLOCKS

Special Taper Blocks

RISER BLOCKS FOR THE TAPER BLOCKS ABOVE
TF-RISER1

1.00" Riser Block (Set of 2)

TF-RISER2

2.00" Riser Block (Set of 2)

TF -RISER3

3.00" Riser Block (Set of 2)

SPECIAL FLANGE GROOVE SETTING BLOCKS

TF-BX

23 BXR Ring Groove Diameter / Width Setting Blocks

TF-1F-T

Flat face setting blocks to accept riser block (T-Shape)

TF-RISERS

TF-1F-T

TF-BX

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

18
U.S. Patent No.
4,524,524

MRP-1000

MRP PITCH DIAMETER AND OVALITY GAGES

This MRP series of pitch diameter gages detects variations in pitch diameter by the use of a gage shoe
that rests on the crest of the threads. Variation in diameter is detected by the indicator readout. These
gages must be set to nominal size with one of a variety of setting options offered. Refer to the setting
option section that follows. Gage accuracy is .001" throughout the range of measurement.
MODEL NO.

MRP-2001

MRP-2511

MRP-1500

MRP-20BL

DESCRIPTION

RANGE

MRP-1000

Internal / External PD Gage

MRP-1500

Internal / External PD Gage

MRP-2001

External PD Gage, w/ 4" reach

Internal 1" - 4"

External 1" - 4"
Internal 1" - 4"
External 1" - 4"

MRP-2001-7

External PD Gage w/ 7" reach

MRP-2001-10

External PD Gage w/ 10" reach

MRP-2002

Internal PD Gage, w/ 4" reach

2 3/8" - 20"

MRP-2002-7

Internal PD Gage, w/ 7" reach

MRP-2002-10

Internal PD Gage w/ 10" reach

2 3/8" - 20"

MRP-2003

Internal / External PD Gage w/ 4" reach

Internal 2 3/8" - 20"
External 2 3/8" - 20"

MRP-2003-7

Internal / External PD Gage w/ 7" reach

MRP-2003-10

Internal / External PD Gage w/10" reach

MRP-2511

External PD Gage, w/ 4" reach

4 1/2" - 9 5/8"

MRP-2521

External PD Gage, w/ 4" reach

4 1/2" - 13 3/8"

MRP-2512

Internal PD Gage, w/ 3 3/8" reach

4 1/2" - 9 5/8"

MRP-2522

Internal PD Gage, w/ 3 3/8" reach

4 1/2" - 13 3/8"

MRP-2513

Internal / External PD Gage w/ 3 3/8" reach

4 1/2" - 9 5/8"

MRP-2523

Internal / External PD Gage w/ 3 3/8" reach

4 1/2" - 13 3/8"

MRP-3001
MRP-3002
MRP-3003

External PD Gage w/ 3 3/8" reach

Internal PD Gage w/ 3 3/8" reach
Internal/External PD Gage w/ 3 3/8" reach

MRP-3004

Internal/External PD Gage w/ 20"-36" reach

8 5/8" - 24"
8 5/8" - 24"
Internal 8 5/8" - 24"
External 8 5/8" - 24"
Internal 8 5/8" - 24"
External 8 5/8" - 24"

MRP-3501

External PD Gage w/ 6 1/4" reach

8 5/8" - 24"

MRP-3502

Internal PD Gage w/ 6 1/4" reach

8 5/8" - 24"

MRP-3503

Internal/External PD Gage w/ 6 1/4" reach

Internal 8 5/8" - 24"

External 8 5/8" - 24"

MRP-10BL

WEAR PADS

A
0U
P-1
MR

A
0L
P-1
R
M

A
2LA
A
1U
P-2
1L
P-2
MR
R
P-2
M
MR

MRP-RAILS

A-7
2U
2
P
MR

MRP REPLACEMENT PARTS

These are some of the most commonly requested replacement parts for the MRP gages. Contact
Gagemaker for pricing of parts not listed.
MODEL NO.

A
2U
P-2
MR

A-7
2L
P-2
R
M

MRP-20KB
MRP-SHOES

DESCRIPTION

UNIT MODEL NO.

PRICE

DESCRIPTION

MRP-10BL

MRP 1000 Block Set

MRP-22UA

MRP-2002 Upper Arm

MRP-10UA

MRP-1000 Upper Arm

MRP-22LA

MRP-2002 Lower Arm

MRP-10LA

MRP-1000 Lower Arm

MRP-22UA-7

MRP-2002-7 Upper Arm

MRP-10SLA

MRP-1000 Special Arm 1" longer

MRP-22LA-7

MRP-2002-7 Lower Arm

MRP-20BL

MRP-2000 Block Set

MRP-22UA-10 MRP-2002-10 Upper Arm

MRP-20LB-1

MRP-2000 Lower Block w/ 1" Hole

MRP-22LA-10 MRP-2002-10 Lower Arm

MRP-21UA

MRP-2001 Upper Arm

MRP-20WP

MRP-21LA

MRP-2001 Lower Arm

MRP-RAIL-12 MRP-2000 12" Cross Rail

MRP-21UA-7

MRP-2001 7" Upper Arm

MRP-RAIL-18 MRP-2000 18" Cross Rail

MRP-21LA-7

MRP-2001 7" Lower Arm

MRP-RAIL-24 MRP-2000 24" Cross Rail

UNIT
PRICE

MRP-2000, 3000 Wear Pad Set

MRP-21UA-10 MRP-2001 10" Upper Arm

MRP-10KB-S

MRP-1000 Knob - Short

MRP-21LA-10

MRP-2001 10" Lower Arm

MRP-10KB-L

MRP-1000 Knob - Long

MRP-.625I

Internal Thread Shoe, 5/8" long

MRP-20KB

MRP-2000 Knob

MRP-.625E

External Thread Shoe, 5/8" long

MRP-.875

Thread Shoe, 7/8" long

MRP-10WP

MRP-1000 Wear Pad Set

MRP-1.00

Thread Shoe, 1.00" long

MRP-10SP

MRP-1000 Spring Plunger

MRP-20WPEX MRP-2000 Extended Wear Pad Set

MRP-20SP

MRP-10KB

UNIT PRICE

MRP-30RS-18 MRP-3000 Rail Set, 18" Max.

MRP-2000 Spring Plunger

MRP-30RS-24 MRP-3000 Rail Set, 24" Max.

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

GAGE SETTING MASTERS

ROD STYLE SETTING STANDARDS FOR MRP-1000, 1500, 2000, 2500, 3000, and 3500

MRP PIN
EXTERNAL
ROD STANDARD

Rod style setting standards are designed for API threaded connections. Each set of standards consists of
two precision ground rods that are ground to lengths in accordance with API Spec 5B. The rod sets are
securely attached together and labeled with the connection size and serial number. The rods set the axial
location of the thread shoe and the distance between shoes for accurate inspection of threaded
connectors.

CONNECTION

PIN
STANDARD
UNIT PRICE

BOX
STANDARD
UNIT PRICE

CONNECTION

NUE & EUE - 2 3/8"

NUE & EUE - 4"

NUE & EUE - 2 7/8"

NUE & EUE - 4 1/2"

PIN
STANDARD
UNIT PRICE

BOX
STANDARD
UNIT PRICE

NUE & EUE - 3 1/2"

BUTTRESS - 4 1/2"

BUTTRESS - 9 5/8"

BUTTRESS - 5"

BUTTRESS - 10 3/4"

BUTTRESS - 5 1/2"

BUTTRESS - 11 3/4"

BUTTRESS - 6 5/8"

BUTTRESS - 13 3/8"

BUTTRESS - 7"

BUTTRESS - 16"

BUTTRESS - 7 5/8"

BUTTRESS - 18 5/8"

BUTTRESS - 8 5/8"

BUTTRESS - 20"

8R LTC - 4 1/2"

8R LTC - 7 5/8"

8R LTC - 5"

8R LTC - 8 5/8"

8R LTC - 5 1/2"

8R LTC - 9 5/8"

8R LTC - 6 5/8"

8R LTC - 20"

8R LTC - 7"
8R STC - 4 1/2"-9.50#

8R STC - 8 5/8"-Other

8R STC - 4 1/2"-Other

8R STC - 9 5/8"

8R STC - 5" - 11.50#

8R STC - 10 3/4"-32.75#

8R STC - 5" - Other

8R STC - 10 3/4"-Other

8R STC - 5 1/2"

8R STC - 11 3/4"

8R STC - 6 5/8"

8R STC - 13 3/8"

8R STC - 7" - 17.00#

8R STC - 16"

8R STC - 7" - Other

8R STC - 18 5/8"

8R STC - 7 5/8"

8R STC - 20"

8R STC - 8 5/8"-24.00#

All Specials

Non-Standard API or Premium Connection Setting Standards

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

MRP BOX
INTERNAL
ROD STANDARD

20
GAGE SETTING MASTERS
ROD STYLE SETTING STANDARDS FOR MRP-1000, 1500, 2000, 2500, 3000, and 3500

Approved for SR22

The rod style setting standards are designed to preset all models of the MRP Series gages for accurate
inspection of API threaded connections. These standards consist of two precision rods that are
ground to lengths in accordance with API. The larger rod sets the distance between the thread shoes
on the MRP gages. The smaller rod sets the axial location of the thread shoe on the MRP gages. The rod
sets are securely attached together and labeled with the API connection size and serial number.

SR22 L8, E8 and MRP Standards

Internal

External

Rod Style Setting Standard

Sets the distance between the

thread shoes on the MRP gages

Size

1.

Select the rod style standard

model, based on the size and
type of connectors being
measured.

Grade

Gagemaker
Pinrod
Setting Standard
Model Number

Standard
Unit Price

Gagemaker
Coupling rod
Setting Standard
Model Number

4 1/2

J/K 55

SR22-4 -P J/K 55

SR22-4 -B J/K 55

4 1/2

L/N 80

SR22-4 -P L/N 80

SR22-4 -P L/N 80

4 1/2

C90/T95/P110

SR22-4 -P
C90/T95/P110

SR224 -B
/C90/T95/P110

J/K 55

SR22-5-P J/K 55

SR22-5-B J/K 55

L/N 80

SR22-5-P L/N 80

SR22-5-P L/N 80

C90

SR22-5-P C90

SR22-5-P C90

C/T 95, P100

SR22-5-P C/T 95, P100

SR22-5-P C/T 95, P100

J/K 55

SR22-5 -P J/K 55

SR22-5 -B J/K 55

L/N 80

SR22-5 -P L/N 80

SR22-5 -B L/N 80

C90

SR22-5 -P C90

SR22-5 -B C90

C/T 95

SR22-5 -P C/T 95

SR22-5 -B C/T 95

P110

SR22-5 -P P110

SR22-5 -B P110

6 5/8

J/K 55

SR22-6 5/8-P J/K 55

SR22-6 5/8-B J/K 55

6 5/8

L/N 80, C90

SR22-6 5/8-P
L/N 80, C90

SR22-6 5/8-B L/N 80,

C90

6 5/8

C/T 95

SR22-6 5/8-P C/T 95

SR22-6 5/8-B C/T 95

6 5/8

P110

SR22-6 5/8-P P110

SR22-6 5/8-B P110

J/K 55

SR22-7-P J/K 55

SR22-7-B J/K 55

L/N 80

SR22-7-P L/N 80

SR22-7-B L/N 80

C90, C/T 95

SR22-7-P C90, C/T 95

SR22-7-B C90, C/T 95

P110

SR22-7-P P110

SR22-7-B P110

7 5/8

J/K 55

SR22-7 5/8-P J/K 55

SR22-7 5/8-B J/K 55

7 5/8

L/N 80

SR22-7 5/8-P L/N 80

SR22-7 5/8-B L/N 80

C90, C/T 95

SR22-7 5/8-P
C90, C/T 95

SR22-7 5/8-B
C90, C/T 95

7 5/8

HOW TO ORDER

Gagemaker
Pin & Coupling
Setting Standards

Designation

7 5/8

P110

SR22-7 5/8-P P110

SR22-7 5/8-B P110

8 5/8

J/K 55

SR22-8 5/8-P J/K 55

SR22-8 5/8-B J/K 55

8 5/8

L/N 80

SR22-8 5/8-P L/N 80

SR22-8 5/8-B L/N 80

8 5/8

C90

SR22-8 5/8-P C90

SR22-8 5/8-B C90

8 5/8

C/T 95

SR22-8 5/8-P C/T 95

SR22-8 5/8-B C/T 95

8 5/8

P110

SR22-8 5/8-P P110

SR22-8 5/8-B P110

9 5/8

J/K 55

SR22-9 5/8-P J/K 55

SR22-9 5/8-B J/K 55

9 5/8

L/N 80

SR22-9 5/8-P L/N 80

SR22-9 5/8-B L/N 80

9 5/8

C90

SR22 9 5/8-P C90

SR22-9 5/8-B C90

9 5/8

C/T 95

SR22-9 5/8-P C/T 95

SR22-9 5/8-B C/T 95

9 5/8

P110

SR22-9 5/8-P P110

SR22-9 5/8-B P110

Standard
Unit Price

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

MRP-5000 and MRP-5500

MRP-5001

FUNCTIONAL ROLL GAGES FOR TAPERED THREADS

The MRP-5000 series of thread pitch diameter gages use hardened and ground thread rolls to inspect
functional size of tapered threaded connectors. The MRP-5000 gages are adjustable within a size range
and have interchangeable thread rolls for inspection of all API threadforms. The gages must be preset to
size using one of a variety of setting methods available. Refer to the setting options that follow.
Thread rolls sold separately.
MODEL NO.

DESCRIPTION

RANGE

MRP-5001

Internal/External Tubing and Casing

connectors, Internal Tool Joints

2 3/8" - 5 1/2"

MRP-5002

Internal/External Tubing and Casing

connectors, Internal Tool Joints

2 3/8" - 13 3/8"

MRP-5003

Internal/External Tubing and Casing

connectors, Internal Tool Joints

13 3/8" - 20"

MRP-5501

External Tool Joints

2 3/8" - 4 1/2"

MRP-5502

External Tool Joints

4 1/2" - 8 5/8"

U.S. Patent No.

5,182,862

UNIT PRICE

MRP-5001
ON PART

MRP-5000 and MRP-5500 THREAD ROLLS

The product threadform determines the thread roll set that will be used. Thread roll sets consist of 2 rolls
supplied in a labeled storage tube.
MODEL NO.
CONNECTION
UNIT PRICE
TR-8R

All API 8 Round Tubing

TR-10R

All API 10 Round Tubing

TR-8LP

8V API Line Pipe, American Std. NPT

TR-11LP

11 1/2 V API Line Pipe, American Std. NPT

TR-B75I

API Buttress Casing, Internal, 4 1/2" - 13 3/8"

TR-B75E

API Buttress Casing, External, 4 1/2" - 13 3/8"

TR-B10I

API Buttress Casing, Internal, 16" - 20"

TR-B10E

API Buttress Casing, External, 16" - 20"

TR-415

P.A.C. Connections, 2 3/8" - 3 1/2"

2 3/8" - 4 1/2" American Open Hole

TR-4238

4" API Full Hole

2 7/8" - 5" Hughes Xtra Hole
2 3/8" - 4 1/2" Hughes Slim Hole
2 3/8" - 5 1/2" API INT Flush

API Numbered Connections #23 - #50

5 1/2" & 6 5/8" API Full Hole
6 5/8" API REG

TR-4338

API Numbered Connections #56 - #77

5 1/2", 7 5/8", & 8 5/8" API REG

TR-5340

2 3/8" - 4 1/2" API REG

3 1/2" - 4 1/2" API Full Hole

TR-61555

API Numbered Connections #10, #12, #13, #16M.T. (Macaroni Tubing)

TR-352H9

3 1/2" - 6 5/8" Hughes H-90

TR-353H9

7" - 8 5/8" Hughes H-90

TR-312H9

2 3/8" - 3 1/2" Hughes Slim Line

MRP-5501

MRP-5501
ON PART

THREAD ROLLS

Replacement Parts
MODEL NO.
MRP5-10
MRP5-11
MRP5-12
MRP5-75T
MRP5-10T
MRP5-125T
MRP5-20T
MRP5-30T

MRP-5000
DESCRIPTION
Positioning Springs (Set of 2)
Retainer Washers (Set of 2)
Lock Screw (Set of 2)
" TPF Taper Arms (Set of 2)
1" TPF Taper Arms (Set of 2)
1" TPF Taper Arms (Set of 2)
2" TPF Taper Arms (Set of 2)
3" TPF Taper Arms (Set of 2)

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

UNIT
PRICE

MODEL NO.
MRP55-125T
MRP55-15T
MRP55-20T
MRP55-30T

MRP-5500
DESCRIPTION

UNIT
PRICE

1" TPF Yoke*

1" TPF Yoke*
2" TPF Yoke*
3" TPF Yoke *

MRP-5000
MRP-5500

*Taper yoke price does not include thread rolls. To determine the
thread rolls required, refer to MRP-5000 thread roll chart above.

22
FRAME AND ROUND STYLE SETTINGS STANDARD
SETTING STANDARDS FOR MRP-1000, 1500, 2000, 2500, 3000, and 3500
The round and frame style setting standards are designed to preset all models of the MRP Series gages
for accurate inspection of API threaded connections. These standards consist of a rigid, non-adjustable
steel block precision machined to proper size to tolerances of +.0003.

FRAME STYLE SETTING STANDARDS

Frame Style

Pin Standard
Pin Std
Box Standard
Model Number
Unit Price
Model Number
4 NUE & EUE
FSTD-412NE-P
FSTD-412NE-B
4 Buttress
FSTD-412B-P
FSTD-412B-B
5 Buttress
FSTD-5B-P
FSTD-5B-B
5 Buttress
FSTD-512B-P
FSTD-512B-B
6 5/8 Buttress
FSTD-658B-P
FSTD-658B-B
7 Buttress
FSTD-7B-P
FSTD-7B-B
7 5/8 Buttress
FSTD-758B-P
FSTD-758B-B
8 5/8 Buttress
FSTD-858B-P
FSTD-858B-B
9 5/8 Buttress
FSTD-958B-P
FSTD-958B-B
10 Buttress
FSTD-1034B-P
FSTD-1034B-B
11 Buttress
FSTD-1134B-P
FSTD-1134B-B
13 3/8 Buttress
FSTD-1338B-P
FSTD-1338B-B
16 Buttress
FSTD-16B-P
FSTD-16B-B
18 5/8 Buttress
FSTD-1858B-P
FSTD-1858B-B
20 Buttress
FSTD-20B-P
FSTD-20B-B
LTC
4 8R LTC
FSTD-412L-P
FSTD-412L-B
5 8R LTC
FSTD-5L-P
FSTD-5L-B
5 8R LTC
FSTD-512L-P
FSTD-512L-B
6 5/8 8R LTC
FSTD-658L-P
FSTD-658L-B
7 8R LTC
FSTD-7L-P
FSTD-7L-B
7 5/8 8R LTC
FSTD-758L-P
FSTD-758L-B
8 5/8 8R LTC
FSTD-858L-P
FSTD-858L-B
9 5/8 8R LTC
FSTD-958L-P
FSTD-958L-B
20 8R LTC
FSTD-20L-P
FSTD-20L-B
STC 4 - 9.50# 8R STC
FSTD-412S-9-P
FSTD-412S-9-B
4 - Other 8R STC
FSTD-412S-O-P
FSTD-412S-O-B
5 - 11.50# 8R STC
FSTD-5S-11-P
FSTD-5S-11-B
5 - Other 8R STC
FSTD-5S-O-P
FSTD-5S-O-B
5 8R STC
FSTD-512S-P
FSTD-512S-B
6 5/8 8R STC
FSTD-658S-P
FSTD-658S-B
7 - 17.00# 8R STC
FSTD-7S-17-P
FSTD-7S-17-B
7 - Other 8R STC
FSTD-7S-O-P
FSTD-7S-O-B
7 5/8 8R STC
FSTD-758S-P
FSTD-758S-B
8 5/8 - 24.00# 8R STC
FSTD-858S-24-P
FSTD-858S-24-B
8 5/8 - Other 8R STC
FSTD-858S-O-P
FSTD-858S-O-B
9 5/8 8R STC
FSTD-958S-P
FSTD-958S-B
10 - 32.75# 8R STC FSTD-1034S-32-P
FSTD-1034S-32-B
10 - Other 8R STC
FSTD-1034S-O-P
FSTD-1034S-O-B
11 8R STC
FSTD-1134S-P
FSTD-1134S-B
13 3/8 8R STC
FSTD-1338S-P
FSTD-1338S-B
16 8R STC
FSTD-16S-P
FSTD-16S-B
18 5/8 8R STC
FSTD-1858S-P
FSTD-1858S-B
20 8R STC
FSTD-20S-P
FSTD-20S-B
All Special Orders, Non-Standard API or Premium Connection Setting Standards
Connection

Box Std
Unit Price

NUE & EUE

Buttress

Round Style
Setting Standards

Frame standards set the

distance between the thread
shoes on the MRP gages

ROUND STYLE SETTING STANDARDS (Cont'd on page 23)

Connection
NUE & EUE

Round standards set the

distance between the thread
shoes on the MRP gages

HOW TO ORDER
1.

Select the round or frame

style standard model, based
on the size and type of
connectors being measured.

Buttress

2 3/8 NUE & EUE

2 7/8 NUE & EUE
3 NUE & EUE
4 NUE & EUE
4 NUE & EUE
5 NUE & EUE
5 NUE & EUE
6 5/8 NUE & EUE
7 NUE & EUE
2 3/8 Buttress
2 7/8 Buttress
3 Buttress
4 Buttress
4 Buttress
5 Buttress
5 Buttress
6 5/8 Buttress

Pin Standard
Model Number
RSTD-238NE-P
RSTD-278NE-P
RSTD-312NE-P
RSTD-4NE-P
RSTD-412NE-P
RSTD-5NE-P
RSTD-512NE-P
RSTD-658NE-P
RSTD-7NE-P
RSTD-238B-P
RSTD-278B-P
RSTD-312B-P
RSTD-4B-P
RSTD-412B-P
RSTD-5B-P
RSTD-512B-P
RSTD-658B-P

Pin Std
Unit Price

Box Standard
Model Number
RSTD-238NE-B
RSTD-278NE-B
RSTD-312NE-B
RSTD-4NE-B
RSTD-412NE
RSTD-5NE-B
RSTD-512NE-B
RSTD-658NE-B
RSTD-7NE-B
RSTD-238B-B
RSTD-278B-B
RSTD-312B-B
RSTD-4B-B
RSTD-412B-B
RSTD-5B-B
RSTD-512B-B
RSTD-658B-B

Box Std
Unit Price

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

ROUND STYLE SETTING STANDARDS (Cont'd)

Pin Standard
Pin Std
Box Standard
Model Number
Unit Price
Model Number
7 Buttress
RSTD-7B-P
RSTD-7B-B
2 3/8 8R LTC
RSTD-238L-P
RSTD-238L-B
2 7/8 8R LTC
RSTD-278L-P
RSTD-278L-B
3 8R LTC
RSTD-312L-P
RSTD-312L-B
4 8R LTC
RSTD-4L-P
RSTD-4L-B
4 8R LTC
RSTD-412L-P
RSTD-412L-B
5 8R LTC
RSTD-5L-P
RSTD-5L-B
5 8R LTC
RSTD-512L-P
RSTD-512L-B
6 5/8 8R LTC
RSTD-658L-P
RSTD-658L-B
7 8R LTC
RSTD-7L-P
RSTD-7L-B
2 3/8 8R STC
RSTD-238S-P
RSTD-238S-B
2 7/8 8R STC
RSTD-278S-P
RSTD-278S-B
3 8R STC
RSTD-312S-P
RSTD-312S-B
4 8R STC
RSTD-4S-P
RSTD-4S-B
4 - 9.50# 8R STC
RSTD-412S-9-P
RSTD-412S-9-B
4 - Other 8R STC
RSTD-412S-O-P
RSTD-412S-O-B
5 - 11.50# 8R STC
RSTD-5S-11-P
RSTD-5S-11-B
5 - Other 8R STC
RSTD-5S-O-P
RSTD-5S-O-B
5 8R STC
RSTD-512S-P
RSTD-512S-B
6 5/8 8R STC
RSTD-658S-P
RSTD-658S-B
7 - 17.00# 8R STC
RSTD-7S-17-P
RSTD-7S-17-B
7 - Other 8R STC
RSTD-7S-O-P
RSTD-7S-O-B
NC23 NC77
RSC#-P
RSC#-B
All Special Orders, Non-Standard API or Premium Connection Setting Standards
Connection

Butress
LTC

STC

RSC

Box Std
Unit Price

LG-5002
Lead Gage

LG-5003
Lead Gage

LEAD GAGES
The Gagemaker lead gages inspects both internal and external thread leads.
MODEL NO.

DESCRIPTION

RANGE

LG-5002

Lead Gage 2point

" - 4" Thread Length

LG-5003

Lead Gage 3point

" - 4" Thread Length

UNIT PRICE
LS-1000
Lead Gage
Setting Standard

LEAD GAGE SETTING STANDARDS

Gagemakers precision lead gage setting standards are manufactured in accordance with API Spec
5B. Lead gage standards are used to preset the lead gages contact point location prior to the
inspection of the threaded connector.
MODEL NO.

CONNECTION DATA

CROSS REFERENCE

1001
1002
1003
1004
1005
1006
1007
1008

" TPF, 8 & 10 TPI

Straight, 8 & 10 TPI
" TPF, 11 TPI
Straight, 11 TPI
" TPF, 5 TPI
1" TPF, 5 TPI
2" TPF, 4 TPI
3" TPF, 4 TPI

5691-A
5691-C
5691-D
5691-F
5691-K
5691-K16
5691-L
5691-M

1009
1010
1011
1012
1013
1027
1032

3" TPF, 5 TPI

1" TPF, 4 TPI
2" TPF, 3 TPI
3" TPF, 3 TPI
1" TPF, 3 TPI
1 1/8" TPF, 5 TPI
1 1/8" TPF, 6 TPI

5691-N
5691-T3
5691-P4A
5691-P4B
5691-P4C
N/A
N/A

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

UNIT PRICE

Inspects Thread Lead

HOW TO ORDER
1.

Select the LG-5003 gage

model.

2.

Select the proper contact

points for the application,
based on the type of
connection and pitch/TPI.

3.

Select the lead gage setting

standard, based on the type
of connection, taper and
threads per inch (not
included in the price of the
gage).

24
INTERNAL TAPER GAGES
IT-6001

Gagemakers internal taper gages measure variation in connection taper. Taper gages are shipped with
.072" diameter contact points as standard. Refer to the contact point chart for the proper contact point for
your particular connection.
MODEL NO.

IT-6000

DESCRIPTION

RANGE

IT-6001

Internal Taper Gage

5554

Any Depth, 4" - 24" Dia.

IT-6000

Internal Taper Gage

8191

4" Depth, 1" - 9" Dia.

IT-6000-07

Replacement Arm Set

N/A

4" Length

IT-5104

Int. Taper & Groove Dia. Gage

N/A

4" Depth, 1" - 10" Dia.

IT-5106

Int. Taper & Groove Dia. Gage

N/A

6" Depth, 1" - 10" Dia.

IT-5108

Int. Taper & Groove Dia. Gage

N/A

8" Depth, 1" - 10" Dia.

IT-5112

Int. Taper & Groove Dia. Gage

N/A

12" Depth, 1" - 10" Dia.

IT-5104-04

Replacement Lower Arm

N/A

4" Length

IT-5106-06

Replacement Lower Arm

N/A

6" Length

IT-5108-08

Replacement Lower Arm

N/A

8" Length

IT-5112-12

Replacement Lower Arm

N/A

12" Length

IT-6001 Replacement Parts

MODEL NO.
IT-6001-01M

IT-5112

CROSS
REF.

UNIT PRICE

(Extensions have #10-40 threads)

DESCRIPTION

LENGTH

UNIT PRICE

Cap - Mitutoyo Indicator

IT-6001-01C

Cap - CDI Indicator

IT-6001-04

Point Adapter

.062"

IT-6001-05

Point Adapter

.200"

IT-6001-06

5" Extension

.410"

IT-6001-07

5 1/2" Extension

.908"

IT-6001-09

6 5/8" Extension

2.030"

IT-6001-10

7" Extension

2.400"

IT-6001-11

7 5/8" Extension

3.026"

IT-6001-12

8 5/8" Extension

4.032"

IT-6001-13

9 5/8" Extension

5.032"

IT-6001-14

10 3/4" Extension

6.154"

IT-6001-15

11 3/4" Extension

7.154"

IT-6001-16

13 3/8" Extension

8.781"

EXTERNAL TAPER GAGES

Gagemakers external taper gages inspect variation in connection taper. External taper gages are shipped
with .072" diameter contact points as standard. Refer to the contact point chart for the proper contact
point for your particular connection.
MODEL NO.

ET-7002

CROSS REF NO.

RANGE

ET-7001

External Taper, 1/2" travel

DESCRIPTION

5637-J

0" - 6"

ET-7002

External Taper, 1/2" travel

5637-D

0" - 10"

ET-7003

External Taper, 1" travel

5637-S

0" - 10"

ET-7004

External Taper, 1/2" travel

5538-J

0" - 16"

ET-7005

External Taper, 1" travel

5538-G

0" - 16"

ET-7006

External Taper, 1/2" travel

5538-U

16" - 24"

ET-7007

External Taper, 1" travel

5538-U

16" - 24"

UNIT PRICE

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

TH-3001R

THREAD HEIGHT GAGES

Gagemaker manufactures many models of thread height gages. Specify the type of thread when ordering.
MODEL NO.

DESCRIPTION

CONNECTION
(Contact Point)

TRAVEL

CROSS
REF NO.

TH-3002B

Ext. Thread Height, 0-25-0

3/4" TPF Buttress (T072)

.094

5886-C

TH-3003B

Ext. Thread Height, 0-25-0,

Step Base

1" Buttress
(T072)

.094

5886-B16

3/4" TPF Buttress

N/A

N/A

TH-3002BB Ext. Thread Height Base Only

TH-3003BB Ext. Thread Height Base Only

1" Buttress

N/A

N/A

TH-3001R

Ext. Thread Height, 0-100

8-Round (T501)

.162

6709-L

TH-3002R

Ext. Thread Height, 0-50-0

8-Round (T501)

.162

6709-M

TH-3002RB Ext. Thread Height Base Only

8-Round (T501)

N/A

N/A

TH-3001S

8-Round (T072)

.196

N/A

TH-3001V Ext. Thread Height, 0-100

Line Pipe/Tool Joint

(T500C)

.196

5886

TH-3002V Ext. Thread Height, 0-50-0

Line Pipe/Tool Joint

(T500C)

.196

5886-A

TH-3002VB Ext. Thread Height Base Only

Line Pipe/Tool Joint

N/A

N/A

Ext. Thread Shave Gage, 0-100

UNIT
PRICE

TH-3001V

TH-3001S

TH-3004

Int. Thread Height, 0-25-0, .0005

Line Pipe (T500C)

.105

5785-D

TH-3006

lnt. Thread Height, 0-25-0, .0005

8-Round (T502/T503)

.105

7705-A

TH-3008

Int. Thread Height, 0-25-0

8-Round (T503/T502)

.094

N/A

TH-3009

lnt. Thread Height, 0-25-0

3/4" TPF Buttress (T072)

.250

N/A

TH-3010

lnt. Thread Height, 0-25-0

1" Base Length (TPD, T500)

.250

NIA

TH-3004/TH3006

THREAD HEIGHT GAGE STANDARDS

Gagemaker manufactures precision setting standards for presetting thread height gages. Specify the type
of thread when ordering.
MODEL NO.
1014

DESCRIPTION

8 & 10 Round Threads

CROSS REF
NO.

TH-3008

UNIT PRICE

6780-J

1014S

8 & 10 Round Threads (Crest to Pitchline Shave)

1015

8 & 11 Pitch V Threads

N/A

1016

8 & 10P Round, 8 & 11 Pitch V Threads

6780-S

1017

13 3/8" & Smaller Buttress, " TPF

1233-A

1018

16" & Larger Buttress, 1" TPF

10382-RS

V.038, 2 TPF Rotary Shouldered Connectors

N/A

10383-RS

V.038, 3 TPF Rotary Shouldered Connectors

N/A

10403-RS

V-0.040, 3 TPF Rotary Connectors

N/A

10502-RS

V0.050, 2 TPF Rotary Connectors

N/A

10503-RS

V-0.050, 3 TPF Rotary Connectors

N/A

6780-L
TH-3009

1233-SB16

TH-3010

THREAD HEIGHT STANDARDS

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

26
CONTACT POINTS

Ball Contact Points

Gagemakers standard ball contact points are manufactured with spherical chrome contact balls. Both
threaded and straight (non-threaded) shanks are available. All Gagemakers inspection gages use
threaded shank contact points. Threaded shanks are #4-48 UNF. Metric threads are available upon
request. Most gages require 2 contact points.
MODEL NO.
STRAIGHT THREADED
POINT
TPI
CONNECTION
UNIT PRICE
SHANK
SHANK
DIAMETER
(each point)
S235
T235
0.235"
3
Hughes Slim Line H-90
S200
T200
0.200"
3 1/2
All Hughes H-90
S144
T144
0.144"
4
API Rotary Shouldered Connections
S128
T128
0.128"
4 1/2
API Rotary Shouldered Connections
S115
T115
0.115"
5
API Rotary Shouldered Connections
S105T
T105T
0.105"
5 1/2
Truncated for Extreme Line
S096
T096
0.096"
6
API Rotary Shouldered Connections
S090
T090
0.090"
5
Buttress Casing - Taper
S072
T072
0.072"
8
API Tubing, Casing, and Line Pipe
S062
T062
0.062"
5
Buttress Casing - Lead
S057
T057
0.057"
10
API Tubing and Line Pipe
S050
T050
0.050"
11 1/2
API Line Pipe
S041
T041
0.041"
14
API Line Pipe
S032
T032
0.032"
18
API Line Pipe
S021
T021
0.021"
27
API Line Pipe (CARBIDE)

CONTACT POINTS AND SPECIAL APPLICATION ACCESSORIES

Gagemaker continually develops new application contacts and indicator accessories. The following items
are in stock for immediate delivery. These contact points have #4-48 UNF threaded shank. Special diameters
available, call for quotation.
Model No.
Chrome / Carbide

Contact Point Extensions

Special Application
Contact Points

Ball
Diameter

Unit Price

Unit Price

Chrome
Carbide
(each point) (each point)

T041 / T041C .041" Dia

T188 / T188C

.188" Dia.

T050 / T050C .050" Dia.

T200 / T200C

.200" Dia.

T057 / T057C .057" Dia.

T219

.219" Dia.

T062 / T062C .062" Dia.

T235 / T235C

.235" Dia.

T072 / T072C .072" Dia.

T250 / T250C

.250" Dia.

T090 / T090C .090" Dia.

T266

.266" Dia.

T096 / T096C .096" Dia.

T288

.288" Dia.

T105 / T105C .105" Dia.

T344

.344" Dia.

T115 / T115C .115" Dia.

T350

.350" Dia.

T125 / T125C .125" Dia.

T375 / T375C

.375" Dia.

2.

Select the model number for

the contact point, based on the
gage. All prices listed are for
individual contact points.
Metric and special diameter
contact points are available.
Call for a quotation.

Unit Price

Unit Price

Chrome
Carbide
(each point) (each point)

T500B / T500CB .500" Dia.

T144 / T144C .144" Dia.

1.

Ball
Diameter

T032 / T032C .032" Dia.

T128 / T128C .128" Dia.

HOW TO ORDER

Model No.
Chrome / Carbide

T531

.531" Dia.

OTHER GENERAL PURPOSE POINTS AND ACCESSORIES

Model No.
T500C
T501
T502
T503
E-Line
TPD
PE-.XXX
PA-45
RC-375
P-500

Description

Unit Price (each point)

50 Cone, V -Threads, TH-3001V, TH-3002V, TH-3004

50 Cone, Self-centering, TH-3001R, TH-3002R
Self-centering sleeve for use with T501, T503
50 Cone, V-Threads, TH-3006
.063 R, Extreme Line, TH-3003E
.020 R, Pit Depth Gage, PD-3003, PD-3004
Point extensions available in .300", .500", .750", 1.00"
45 Point adapter
.375" Dia. Roller Contact
TH-3001R, Flat Face Contact

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

THREAD PROFILE GAGES

Gagemaker manufactures precision thread profile gages for the quick identification of product threadforms.
Specify the connection which is to be inspected when ordering. Special profiles will be quoted upon
request.
MODEL NO.

CONNECTION / DESCRIPTION

UNIT
PRICE

TP-415

2 3/8" - 3 1/2" P.A.C. Connections

1.5" TPF, 4TPI

V-0.076

TP-RTC-8R

All API 8R Casing, Tubing & Drill Pipe

" TPF, 8 TPI

8 Round

TP-RTC-10R

All API 10R Tubing

" TPF, 10 TPI 10

Round

TP-8V

8V API Line Pipe, American Std. NPT

" TPF, 8 TPI

8 V Thread

TP-11-1/2V

11 V API Line Pipe, American Std. NPT

" TPF, 11 TPI

11 V Thread

TP-5BTC75-INT

API Buttress Casing, Internal, 4 1/2" - 13 3/8"

" TPF, 5 TPl

TP-5BTC75-EXT

API Buttress Casing, External, 4 1/2" - 13 3/8"

" TPF, 5 TPI

TP-5BTC1-INT

API Buttress Casing, Internal, 16" - 20"

1" TPF, 5 TPI

TP-5BTC1-EXT

API Buttress Casing, External, 16" - 20"

1" TPF, 5 TPI

TP-453

2 3/8" - 4 1/2" API REG

3 1/2", 4 1/2" API Full Hole

3" TPF, 5 TPI

V-0.040

TP-542

6 5/8" API REG

5 1/2" & 6 5/8" API Full Hole

2" TPF, 4 TPI

V-0.050

TP-543

5 1/2", 7 5/8", & 8 5/8" API REG

3" TPF, 4 TPI

V-0.050

TP-642

4" API Full Hole

2 7/8" - 5" Hughes Xtra Hole
2 3/8" - 4 1/2" Hughes Slim Hole

2" TPF, 4 TPI

V-0.038R

TP-23-50

2 3/8" - 5 1/2" API INT Flush

API Numbered Connections #23 - #50

2" TPF, 4 TPI

V-0.038R

TP-56-77

API Numbered Connections #56 - #77

3" TPF, 4 TPI

V-0.038R

TP-10-16

API Numbered Connections #10, #12, #13, #16

M.T. (Macaroni Tubing)

1.5" TPF, 6 TPI

V-0.055

TP-076

2 3/8" - 4 1/2" American Open Hole

1.5" TPF, 4 TPI

V-0.076

TP-935-2

3 1/2" - 6 5/8" Hughes H-90

2" TPF, 3.5 TPI

H-90

TP-935-3

7" - 8 5/8" Hughes H-90

3" TPF, 3.5 TPI

H-90

TP-931-1/4

2 3/8" - 3 1/2" Hughes Slim Line

1.25" TPF, 3TPI

H-90

TP-9060LS

90 & 60 Threads, Tool Grinding & Setting Gage Tool Grinding &
Setting Gage

TP-NPT-14

NPT Threads

" TPF, 14TPI

Standard Overlays
Special Overlays

SPECIALS QUOTED

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

TP SERIES
Thread Profile Gages

Thread profile gages quickly

identify API thread forms

HOW TO ORDER
1.

Select the profile gage

model based on the type of
connectors being
measured.

28
API AND PREMIUM GAGES
Gagemaker has developed many gages for the inspection of premium threaded connections. Many
of these special gages have direct application to API connections as well.
MODEL NO.
DESCRIPTION
CROSS
RANGE
UNIT PRICE
REF.

BB-7000

PD-3004

Back-of-Box gage measures coupling and box seal diameters. Gage must be preset
with a standard.
BB-7000

Back-of-Box Seal Diameter Gage

N/A

Premium

Buttress runout gage insures proper thread pullout on runout type threads. Standard 1"
and 2" point spacing.
BR-2001
Buttress Runout Gage
1211
All Sizes
BRB-2001
Buttress Runout Base Only
N/A
CA-9001

The coupling alignment gage insures that the threads on both ends of the coupling are
properly aligned with each other.
CA-9001

Coupling Alignment Gage

7964-B

All Sizes

The PD-3000 measures the depth of surface pitting on tubular goods.

PT-4000

PD-3003

Pit Depth Gage, AGD #1, 0-100

4486-D

.090

PD-3004

Pit Depth Gage, AGD #2, 0-100

N/A

.450

PD-3005

Pit Depth Gage w/ flat base

AGD #2, 0-100

N/A

.450

PD-3000B

Pit Depth Gage BASE ONLY

N/A

The PT-4000 adjusts to determine the proper make-up location of API couplings.
Also available in metric as the PT-4000M.
SG-8001

PT-4000

Power Tight Make-up Gage

N/A

All Sizes

The Saddle gage measures the amount of hook or bend at the end of a joint of pipe.
SG-8001

BR-2001

Saddle Gage

5336-C

All Sizes

The throat gage measures wall thickness up to 1" with a reach of 12".
TG-9002

Throat Gage

7802-A

The WT-9000 series of gages measures wall thickness at specific distances from the
end of the pipe. Specify the distance from the end of the pipe to the measuring plane
when ordering.
TG-9002
TS-1000

WT-9001

Wall Thickness Gage

8245-C

2 3/8" - 4 1/2"

WT-9002

Wall Thickness Gage

N/A

4 1/2" - 9 5/8"

WT-9003

Wall Thickness Gage

N/A

4 1/2" - 13 3/8"

Gagemakers depth gages inspect the location of internal and external shoulders from
the face of the pin and box connectors.
TSS-1000

WT-9001

DG-1008

DG-1000-B
DG-1000-R20

TS-1000

Shoulder Depth Gage

TSS-1000

TS-1000 Setting Standard

1" - 6"

TS-4000

Shoulder Depth Gage (Specify Taper)

TSS-4000

TS-4000 Setting Standard

2 3/8" & Larger

DG-1008

Depth Gage w/ digital display (in/mm), .0005" resolution

0" - 8"

DG-1012

Depth Gage w/ digital display (in/mm), .0005" resolution

0" - 12"

DG-1018

Depth Gage w/ digital display (in/mm), .0005" resolution

0" - 18"

DG-1000-R7

7" Extension Arm

DG-1000-R20

20" Extension Arm

DG-1000-B

Blade Contact

DG-1000-GV

Groove Locator, .100" thick

DG-1000-GV

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

API AND PREMIUM GAGES (CONTINUED)

MODEL NO.

DESCRIPTION

SQ-1630

RANGE

SQ-1630S

UNIT
PRICE

Pin nose gages measure pin end seal diameters of premium connectors. Specify the distance from the
face of the connector to the measuring plane and desired contact point diameter when ordering.
(Customer to supply standoff and point size)
Reposition Point Standoff of PN3000 Gages
PN-3001

Pin Nose Diameter Gage

2 3/8" - 5 1/2" (0"-5.750")

PN-3002

Pin Nose Diameter Gage

6" - 9 5/8"

(0"-9.750")

PN-3003

Pin Nose Diameter Gage

10" - 13 3/8"

(0"-13.750")

PN-3000/T.100

Pin Seal Standoff Plate

.100" thick

(2 per set)*

PN-3000/T.078

Pin Seal Standoff Plate

.078" thick

(2 per set)*

PNS-3000

Pin Nose Gage Setting Standard

2 3/8" - 13 3/8"

PNS-3000

PN-3000/T

* Standoff plates available in a variety of thickness

The SQ-1630 squareness gage monitors the alignment of welded connectors to the pipe body
SQ-1630

Squareness Gage

16" diameter, 30" length

SQ-1630S

Optional Calibration Square

12" x 32" Square

ST-7001

The ST-7001 measures variation in ring and plug gage standoff on rotary shouldered connectors. The
gage is supplied complete with setting standard.
ST-7001

Indicator Standoff Gage

PN-3001

.615" - .635"

Gagemakers API 6B flange groove gages inspect groove diameter and groove width.
BX-1000

6B Groove Diameter Gage w/ T188 Points

BX, R, RX Grooves to 13"

BXG-1000

6B Groove Width Gage w/ T072 Points

All BX, R, RX Grooves

BXG-1002

Groove width gage

Groove widths, 2.0"

BX-R13

Replacement Rod for BX-1000, 13"

BX, R, RX Grooves to 13"

BX-R24

Optional Extension Rod for BX-1000, 24"

BX, R, RX Grooves to 25"

BX-R30

Optional Extension Rod for BX-1000, 30"

BX, R, RX Grooves to 31"

BX-R36

Optional Extension Rod for BX-1000, 36"

BX, R, RX Grooves to 37"

The CamLock micrometers measure API weld flange thickness. Supplied with verification standard
CL-1001

CamLock Micrometer - 25

0" - 1"

CL-1002

CamLock Micrometer - 25

1" - 2"

CL-1003

CamLock Micrometer - 25

2" - 3"

CL-1004

CamLock Micrometer - 25

3" - 4"

CL-1002

BX-1000

BXG-1000

CG-1001

The Gagemaker calibrator gage calibrates gages and indicators per AGD specification, The CG-1000
gages are shipped in a durable custom shipping/storage case. Optional wood storage case available.
CG-1001

Bench Calibrator Gage

.0001" Resolution, Mechanical

CG-1001E

Electronic Bench Calibrator Gage w/ SPC

Output

.00005"/.001" mm Resolution,
Digital

CG-1001E

The Gagemaker API Thread Data Chart provides critical thread data per API Specification 5B.
Thread Data
Chart

API Tubing and Casing Thread Dimension

Slide Chart

2 3/8" to 20" 8-Round, LTC,

STC, 4 1/2" to 20" Buttress

THREAD DATA CHART

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

30
DIAL INDICATORS
Gagemakers mechanical indicators are manufactured per ANSI AGD specifications. Standard indicators
used in Gagemaker products are made in the U.S.A.
MODEL NO.

REPLACEMENT FOR
GAGE MODEL NO.

TRAVEL/
RESOLUTION

ACCURACY
Per ANSI B89.1.10M-1987
FIRST 2 1/3 REV

Dial Indicators

Digital
Indicators

UNIT
PRICE

AFTER 2 1/3 REV

801 (BAL)

BR-2001

.250"/.001"

.001"

.002"

801I (BAL)

TH-3002R, TH-3002V

.250"/.001"

.001"

.002"

802 (CONT)

WT-9000 Series

.250"/.001"

.001"

.002"

802I (CONT)

TH-3001R, TH-3001V, PD-3003

.250"/.001"

.001"

.002"

803 (BAL)

PN-3000 Series, BX-1000,

BXG-1000

.125"/.0005"

.0005"

.001"

803I (BAL)

TH-3001B, TH-3002B, TH-3003B,

TS-4000

.125"/.0005"

.0005"

.001"

805 (BAL)

General Application Mechanical

.100"/.0005"

.0005"

.001"

862 (CONT)

ET-7000 Series w/ Lever

.500"/.001"

.001"

.002"

862I (CONT)

IT-6001, PD-3004

.500"/.001"

.001"

.002"

863

RG-7000 Series, TH-3004,

TH-3006, TH-3008, TH-3009,
TH-3010, SRG-7000, CA-9001
MRP-5000 Series,SPG-6000

.500"/.0005"

.0005"

.001"

863L (BAL)

PD-8000 Series w/ Lever

.500"/.0005"

.0005"

.001"

863I (BAL)

PD-6000, PD-6001
PG-6000 Series, TS-1000, IT-5100

.500"/.0005"

.0005"

.001"

2776FB

General Application Mechanical

1.00"/.0005"

.0005"

.002"

882 (CONT)

ET-7003, ET-7005, ET-7007

1.00"/.001"

.001"

.002"

882I (CONT)

IT-6000

1.00"/.001"

.001"

.002"

80-0403

LG-5003

.100"/.0005"

.0005"

.001"

80-0400

LG-5003

.025"/.0001"

.0001"

.0003"

83-0584

MRP-2000, MRP-2500, MRP-3000

.500"/.001"

.001"

.002"

83-0582

MRP-2000, MRP-2500, MRP-3000

.500"/.0005"

.0005"

.001"

87-070

MRP-1000, MRP-1500

.125"/.0005"

.0005"

.001"

543-683B

Electronic/Digital

.500"/.0005"

.0005"

.001"

2358B-50

General Application Mechanical

.500"/.0001"

.0001"

.0003"

Note: I after model number indicates counter clockwise rotation.

L after model number indicates a lifting lever.
Custom Storage Cases

GAGE STORAGE CASES

Gage storage cases are supplied with or without foam inserts. Custom fitting of gages to cases is
available. Custom cutting of cases is priced on an hourly basis, call for quotation.
MODEL NO.
INSIDE MEASUREMENTS
UNIT PRICE
UNIT PRICE
w/o FOAM
w/ FOAM
PEL-1400
12 1/4" X 9 1/4" X 5 1/4"

PEL SERIES
Heavy-Duty Shipping/Storage Cases

PEL-1450

15" X 10 3/8" X 6"

PEL-1500

17 7/8" X 11 3/4" X 6 1/8"

PEL-1550

19 7/8" X 13 1/4" X 7 3/4"

PEL-1600

22" X 17" X 8"

PEL-1700

36" X 13 1/2" X 5"

PEL-1750

50 3/4" X 13 1/2" X 5"

CASE-1

16" X 11" X 3"

CASE-2

14" X 10" X 3"

CASE-3

9" X 12 1/2" X 2 3/4"

CASE-4

7" X 4" X 2"

CASE-5

21 1/2" X 14 1/2" X 6 5/8"

CASE SERIES
Standard Storage Cases

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Prices subject to change without notice 1/04

Calibration Services
Gages, Standards, and Inspection Equipment
Gagemaker provides full service calibration on all gages sold. A standard long form certificate is
provided with all calibrations, at no extra charge. Gages produced and sold by other manufacturers
are quoted on an individual basis. The prices listed below are to be used as a guideline only. Many times
repairs are necessary to maintain gage calibration. All repairs are quoted and require customer
authorization prior to work being done. An evaluation charge of $75.00 is required to quote repairs.

MIC TRAC Calibration (All Models)

MIC TRAC Model Options
MIC TRAC Model No.

MIC TRAC
Non Force-Lok
Unit

MIC TRAC ForceLok Unit

MIC TRAC
with Probe and
Digital Readout

MIC TRAC
with SLEC File

Repair
Rate ($/hr)

TRAC-2012, MT-3012
TRAC-2024, MT-3024
TRAC-2036, MT-3036
TRAC-2048, MT-3048
TRAC-2060, MT-3060
MT-4012
MT-4024
MT-4036
MT-4048
Note: Gagemaker cannot guarantee the accuracy of this unit unless it is correctly packaged and shipped in a proper
carton. Request a Return Authorization Number and instructions, prior to shipping. Current cost for a replacement
shipping container is $180.00. All MIC TRAC units are supplied with a calibration certificate and inch-by-inch
error report, at no additional charge.

Gages and Other Inspection Equipment Calibration

Model No.

Services Available

Calibration Repair
Rate ($/hr)
Price

Gage Calibration Equipment

TF-1F, TF-2R Setting Blocks
TF-XXT Taper Blocks
TF-XXRSC Taper Block Set
TF-BX Setting Blocks
TF-TP Calibration Fixture
CG-1001 Bench Calibrator Gage
Thread Diameter Measurement Gages
RG-7000, PG-6000 Diameter Gages
Large Diameter Measurement Gages

Inspect flatness, parallelism, and size

Inspect taper and size
Inspect taper and size
Inspect angle and size
Inspect and calculate new constant
Verify micrometer travel
Verify function and check parallelism

MIC 360 Gage

API Gages/Standards

Verify wheel diameter and gage function

Lead Gages
Lead Standards
MRP Gages
MRP Standard Set
Thread Height Standards
Profile Gages
Miscellaneous Equipment

Calibrate indicator and verify function

Inspect step/step per specification
Inspect complete assembly
Inspect rod lengths per specifications
Inspect groove depths per specifications
Verify profile with optical comparator

Indicators
Thread Rolls
CMM Contract Inspection

Calibrate per specification

Calibrate per specification
Per customer specifications

CALIBRATION
CERTIFICATES

Calibration Certificates
Certificate Type
Standard Long Form Certificates provided with all calibrations. Includes model number,
serial number, required and actual measurements, traceability to NIST or other governing
body, inspectors signature, calibration and recalibration date. Profile gages are issued
certificates of compliance only.
Special Long Form Certificates includes any documentation other than that listed
under the Standard Long Form Certificate.

DETERCO. Houston, Texas

Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com

Price