Standardized valve series
3/2-way
acc. to NAMUR, 900 Nl/min (0.915 Cv)
Technical data for series
KN-05
Order code
KN-05-310-HN-142
Series
and
function
Coil options
Standard coil
1)
(with plug socket 28-ST-01)
141
142
152
156
157
161
162
=
=
=
=
=
=
=
12 V DC, 4.2 W
24 V DC, 4.2 W
24 V AC, 7/4 VA
115 V AC, 7/4 VA
230 V AC, 7/4 VA
12 V DC, 2.2 W 2)
24 V DC, 2.2 W 2)
Coils with M12 connector and LED
042 = 24 V DC, 4.8 W
062 = 24 V DC, 2.5 W 2)
Coils with higher humidity resistance
742 = 24 V DC, 4.2 W without plug socket
757 = 230 V AC, 7/4 VA without plug socket
842 = 24 V DC, 4.2 W (with plug socket 28-ST-01)
857 = 230 V AC, 7/4 VA (with plug socket 28-ST-01)
Without coil and plug socket
570 = Power consumption 4.2 W, 7/4 VA
560 = Power consumption 2.2 W 2)
When the valve is requested without the plug socket, the first digit of the order code for standard coils must be changed
from 1 to 4. If optional plug sockets are required they may be ordered separately. Further details see page 5.044.
1)
Design and function
Spool valve for single acting actuators switched by an electrical signal.
The exhaust air is guided into the spring chamber of the actuator. The standard coil, plug socket (see page
5.044), locating pin, screws and seals are included.
For outdoor applications or in areas with high humidity use coil 23-SP-011-1 or 23-SP-012-1 (see page 5.120).
Please specify required control voltage when ordering.
Valves of this series are available in explosion proof design in accordance with 94/9/EG (ATEX). For further
details see chapter 12 of this catalogue.
Order number
KN-05-310-HN
KN-05-311-HN
Please complete
according to order
code.
Function
3/2-way, normally closed
3/2-way, normally closed
single solenoid, air spring return
single solenoid, spring return
Connection
G 1/4 at 1 and 3; flange to NAMUR at 2 and 3
Nominal size
6 mm
Flow rate
780 Nl/min (0.792 Cv)
Pressure range 3 . . . 10 bar (8 bar at 2.2 W); 43 145 psi (116 psi at 2.2 W)
Actuating
on 16 ms
on 13 ms
force at 6 bar off 18 ms
off 16 ms
Temperature
10 C . . . + 70 C (+ 14 F + 158 F)
range
Materials
Body: Al (anodized), Seals: NBR, Inner parts: Al, stainless steel, brass
Degree of
IP 65 according to EN 60529
protection
Weight
0.320 kg (0.705 lb.)
2)
max. 8 bar (max. 116 psi) at 2.2 W and 2.5 W.
5.040
Subject to change
Standardized valve series
5/2- and 5/3-way
acc. to NAMUR, 900 Nl/min (0.915 Cv)
Technical data for series
KN-05
Order code
KN-05-510-HN-142
Series
and
function
Coil options
Standard coil
Coils with M12 connector and LED
042 = 24 V DC, 4.8 W
062 = 24 V DC, 2.5 W 2)
1)
(with plug socket 28-ST-01)
141
142
152
156
157
161
162
=
=
=
=
=
=
=
12 V DC, 4.2 W
24 V DC, 4.2 W
24 V AC, 7/4 VA
115 V AC, 7/4 VA
230 V AC, 7/4 VA
12 V DC, 2.2 W 2 )
24 V DC, 2.2 W 2 )
Coils with higher humidity resistance
742 = 24 V DC, 4.2 W without plug socket
757 = 230 V AC, 7/4 VA without plug socket
842 = 24 V DC, 4.2 W (with plug socket 28-ST-01)
857 = 230 V AC, 7/4 VA (with plug socket 28-ST-01)
Without coil and plug socket
570 = Power consumption 4.2 W, 7/4 VA
560 = Power consumption 2.2 W 2 )
When the valve is requested without the plug socket, the first digit of the order code for standard coils must be changed
from 1 to 4. If optional plug sockets are required they may be ordered separately. Further details see page 5.044.
1)
Design and function
Spool valve for double acting actuators switched by an electrical signal.
The standard coil, plug socket (see page 5.044), locating pin, screws and seals are included.
For outdoor applications or in areas with high humidity use coil 23-SP-011-1 or 23-SP-012-1 (see page 5.120).
Please specify required control voltage when ordering.
Valves of this series are available in explosion proof design in accordance with 94/9/EG (ATEX). For further
details see chapter 12 of this catalogue.
Order number
KN-05-510-HN
KN-05-511-HN
KN-05-520-HN
KN-05-530-HN
KN-05-533-HN
5/2-way
double solenoid
5/3-way
center position
closed
5/3-way
center position
exhausted
Please complete
according to order
code.
Function
Connection
Nominal size
Flow rate
Pressure
range
Actuating
force at 6 bar
Temperature
range
Materials
Degree of
protection
Weight
2)
5/2-way
5/2-way
single solenoid
single solenoid
air spring return spring return
G 1/4 at 1, 3 and 5; flange to NAMUR
6 mm
900 Nl/min
800 Nl/min
(0.915 Cv)
(0.813 Cv)
3 . . . 10 bar 2 )
(43 145 psi)
on 16 ms
on 16 ms
off 17 ms
off 18 ms
at 2 and 4
900 Nl/min
(0.915 Cv)
2 . . . 10 bar 2 )
(29 145 psi)
14 ms
680 Nl/min
(0.691 Cv)
3 . . . 10 bar 2 )
(43 145 psi)
on 14 ms
off 16 ms
10 C . . . + 70 C (+ 14 F + 158 F)
Body: Al (anodized), Seals: NBR, Inner parts: Al, stainless steel, brass
IP 65 according to EN 60529
0.320 kg (0.705 lb.)
0.440 kg (0.970 lb.)
max. 8 bar (max. 116 psi) at 2.2 W and 2.5 W.
Subject to change
5.041
Standardized valve series
3/2- and 5/2-way
acc. to NAMUR, 900 Nl/min (0.915 Cv)
Dimensions for series
KN-05
KN-05-310-HN, KN-05-311-HN
1
2
3
(7)
=
=
=
=
pressure inlet
outlet
exhaust
manual override (detent)
can be repositioned by 180h
(8) = plug socket can be
repositioned by 180h
(9) = solenoid coil can be
repositioned 4 x 90h
KN-05-510-HN, KN-05-511-HN
1
2, 4
3, 5
(7)
=
=
=
=
pressure inlet
outlet
exhaust
manual override (detent)
can be repositioned by 180h
(8) = plug socket can be
repositioned by 180h
(9) = solenoid coil can be
repositioned 4 x 90h
5.042
Subject to change
Standardized valve series
5/2- and 5/3-way
acc. to NAMUR, 900 Nl/min (0.915 Cv)
Dimensions for series
KN-05
KN-05-520-HN, KN-05-530-HN, KN-05-533-HN
1
= pressure inlet
2, 4 = outlet
3, 5 = exhaust
Subject to change
(7) = manual override (detent) can be repositioned by 180h
(8) = solenoid coil can be repositioned by 4 x 90h
(9) = plug socket can be repositioned by 180h
5.043
