www.swagelok.
com
Tu b e Supports
Pipe, tube, and hose supports
1/4 to 1 in. and 6 to 25 mm outside diameter
316 stainless steel, carbon steel, and polyethylene
Wall- and channel-mounted options
Single and multiple lines
Tube Supports
Maximum Tube Support Spacing
Contents
Applies to all supports described in this catalog.
Maximum Tube
Support Spacing
Page 2
Pipe Size
Tube Size
P Clamp Supports
in.
in.
Page 2
1/4, 3/8, 1/2
Tube Support Strips
mm
6, 8, 10,
12, 15
ft
3.25
1.0
1/2
3/4
16, 18, 20
4.00
1.2
3/4
1, 1 1/4
22, 25
5.00
1.5
6.50
2.0
1 1/4, 1 1/2
1 1/2, 2
8.75
2.7
Page 3
P Clamp Supports
Cushioned Clamp
Tube Supports
Page 3
are an economical way to support tube or hose runs in a
variety of sizes
install easily to a wall or equipment frame using a single
screw or bolt.
Technical Data
Bolted Plastic
Clamp Supports
Page 4
Component
Material
Clamp
316 SS/AMS 5524
Temperature Rating
Cushion
Black EPDM/
SAE J200BC715 C12, C20
40 to 212F
(40 to 100C)
0.61
(15.5)
A
0.22
0.27
(5.6)
(6.9)
dia
0.5
0.032
(12.7)
(0.81)
Ordering Information and Dimensions
Dimensions, in inches (millimeters), are for reference only and
are subject to change.
A, Tube Size
Ordering
Number
B
in. (mm)
in.
mm
1/4
SS-TBP4
0.53 (13.5)
3/8
10
SS-TBP6
0.59 (15.0)
1/2
12
SS-TBP8
0.65 (16.5)
3/4
20
SS-TBP12
0.84 (21.3)
25
SS-TBP16
0.95 (24.1)
Contact your authorized Swagelok sales and service representative
for additional sizes.
Tube Supports
Tube Support Strips
organize multiple tubing or hose runs
D
A
offer push-in installation
install easily to a wall or equipment frame using two screws
or bolts.
E dia
C
Technical Data
Component
Material
Tube support strip
Polyethylene
Temperature Rating
40 to 200F
(40 to 93C)
Ordering Information and Dimensions
Dimensions are for reference only and are subject to change.
A
Tube Size
Maximum
Number of
Tubing and
Hose
Channels
in.
mm
Ordering
Number
1/4
PE-TBR4-10
Dimensions
in. (mm)
B
4.50
10
PE-TBR6-10
1/2
PE-TBR8-6
D
4.05
(114) 0.50 (103)
5.62 (12.7) 5.15
10
3/8
(143)
E
0.18
(4.6)
(131)
5.25
0.93
4.56
0.24
(133)
(23.6)
(116)
(6.1)
Contact your authorized Swagelok representative for additional sizes.
Cushioned Clamp Tube Supports
D
C
A
provide channel-mounted tube support
dampen shock and vibration
Ordering Information and Dimensions
resist galvanic corrosion.
Dimensions are for reference only and are subject to change.
Technical Data
Component
Clamp
Cushion
A, Tube Size
Material
Electro-dichromate
finished carbon steel or
316 stainless steel
Thermoplastic
polypropylene-based
elastomer
Temperature Rating
50 to 275F
in.
mm
1/4
Basic
Ordering
Number
TBC4
3/8
10
TBC6
1/2
TBC8
3/4
20
TBC12
25
TBC16
(45 to 135C)
Dimensions, in. (mm)
B
0.27
C
0.98
D
0.62
(15.7)
(6.9)
(24.9)
0.33
1.13
0.82
(8.4)
(28.7)
(20.8)
0.40
1.34
0.94
(10.2)
(34.0)
(23.9)
0.52
1.68
1.20
(13.2)
(42.7)
(30.5)
0.65
1.95
1.44
(16.5)
(49.5)
(36.6)
Contact your authorized Swagelok representative for additional sizes.
Clamp fits any 1 5/8 in. mounting channel.
To order, select a basic
ordering number and add a
clamp material designator.
Example: S-TBC4
Clamp Material
Designator
Electro-dichromate
Sfinished carbon steel
316 stainless steel
SS-
Tube Supports
Bolted Plastic Clamp Supports
absorb shock and vibration
resist many chemicals and corrosives
reduce stress on system components
enhance system reliability
resist ultraviolet light
Single
support
kit
make system easily accessible for installation and
maintenance.
Bolted plastic clamp supports offer versatility for
mounting tubing and pipe. Three congurations
single, stacking, and twinare available.
Bolted plastic clamp supports offer three mounting
options:
Weld plate
Mounting rail and rail nuts
Strut nuts
Stacking
support
kit
Temperature Rating
22 to 194F (30 to 90C)
Materials of Construction
Component
1 Hex head bolts
2 Cover plate
3 Support body
4 Lock plate
5 7/16 in. or 10 mm hex
head stacking bolts
Material/Specification
304 SS
304 SS/DIN 1.4301 SS
Virgin polypropylene
Weld plate
mounting
option
Zinc-plated steel
6 Weld nut
303 SS/DIN 1.4305 SS
7 Weld plate
304 SS/DIN 1.4301 SS
8 Mounting rail
303 SS/DIN 1.4305 SS
9 Rail nut
CF8M/DIN 1.4408 SS
10 Strut nut
304 SS/DIN 1.4301 SS
Mounting rail
and rail nuts
mounting option
Zinc-plated steel
316 stainless steel bolts and cover plates are available (see Options).
Polyamide support bodies are available (see Options).
316 stainless steel strut nuts are available (see Options).
10
Strut nut
mounting
option
Tube Supports
Single-Support Kits
Twin-Support Kits
D
E
B
F
Ordering Information and Dimensions
Dimensions are for reference only and are subject to change. For hose applications, consult your authorized
Swagelok representative.
Pipe Kits
Pipe
Size A
in.
Ordering
Number
Tube
Size A
in.
Tube Kits
Tube
Ordering
Size A
Number
mm
Dimensions, in. (mm)
Ordering
Number
Group
Single Support
1/4
3/8
1/2
1/2
304-S3-PP-8P
304-S1-PP-4T
304-S1-PP-6T
304-S3-PP-8T
304-S1-PP-6TM
304-S1-PP-8TM
10
304-S1-PP-10TM
12
304-S1-PP-12TM
15
304-S3-PP-15TM
16
304-S3-PP-16TM
5/8
304-S3-PP-10T
18
304-S3-PP-18TM
3/4
304-S3-PP-12T
20
304-S3-PP-20TM
7/8
304-S3-PP-14T
22
304-S3-PP-22TM
304-S3-PP-16T
25
304-S3-PP-25TM
1 1/4
304-S5-PP-20T
3/4
304-S5-PP-12P
304-S5-PP-16P
1 1/4
304-S5-PP-20P
1 1/2
304-S5-PP-24T
1 1/2
304-S6-PP-24P
304-S6-PP-32T
1.30
0.51
1.34
0.79
1.06
(33.0)
(13.0)
(34.0)
(20.0)
(27.0)
1.61
0.67
1.89
1.30
1.38
(40.9)
(17.0)
(48.0)
(33.0)
(35.1)
2.56
1.14
2.76
2.05
2.28
(65.0)
(29.0)
(70.1)
(52.1)
(57.9)
2.84
1.28
3.39
2.60
2.60
(72.1)
(32.5)
(86.1)
(66.0)
(66.0)
Twin Support
1/4
304-S1T-PP-4T
3/8
304-S1T-PP-6T
1/2
304-S3T-PP-8T
3/4
304-S3T-PP-12T
304-S3T-PP-16T
304-S1T-PP-6TM
304-S1T-PP-8TM
10
304-S1T-PP-10TM
12
304-S1T-PP-12TM
For overall height, add appropriate mounting option dimension.
Threads for single fractional supports are 1/4-20, single metric supports are M6.
Threads for group 1 twin supports are 1/4-20, group 3 twin supports are 5/16-18.
Single-Support Stacking Kit
You can stack up to three single bolted plastic clamp
supports. The top support uses a cover plate. The lower
support(s) uses a lock plate. To order a stacking support kit,
add -ST to the single tube kit ordering number.
Example: 304-S1-PP-4T-ST
1.50
0.53
1.42
0.79
(38.1)
(13.5)
(36.1)
(20.1)
1.93
0.73
2.64
1.42
(49.0)
(18.5)
(67.1)
(36.1)
Tube Supports
Mounting Configurations
To order a bolted plastic clamp system, choose from the
three mounting options listed.
Weld Plate Mounting Option
Weld plates are available in standard and elongated
Identify the support kit group number listed in the table.
lengths.
Example: Group 1
Weld nuts are welded, not press fit, to the weld plate.
Select the corresponding weld plate ordering number.
To order, select a support kit ordering number from the table
on page 5.
Note: The Group number for the support kit and the weld
kit must be the same.
Example: 304-S1-PP-4T
Example: 304-S1-WP
Single Support
Weld Plate
Twin Support
Weld Plate
Standard weld plate
Elongated weld plate
Top
Top
A
D
0.25 (6.4) dia
D1
B
Side
Side
A or A1
Weld Plate Ordering Information and Dimensions
Dimensions are for reference only and are subject to change.
Ordering Number
Standard
Group
Fractional
Elongated
Metric
Fractional
Dimensions, in. (mm)
Metric
304-S1-WP
304-S1-WPM
Single Support Weld Plate
1.42
304-S1-WPE 304-S1-WPEM
304-S3-WP
304-S3-WPM
304-S3-WPE
304-S5-WP
(36.1)
304-S5-WPE
304-S6-WP
304-S6-WPE
304-S1T-WP
304-S1T-WPM
304-S3T-WP
304-S3T-WPM
D1
2.52
1.97
(64.0)
(50.0)
1.97
3.07
(50.0)
(78.0)
1.18
0.12
2.76
3.94
(30.0)
(3.0)
(64.0)
3.39
(70.1)
(100)
(86.1)
3.46
4.57
3.94
(87.9)
(116)
(100)
(37.1)
2.76
(70.1)
2.52
Twin Support Weld Plate
1.46
Elongated weld plate only.
304-S3-WPEM
A1
0.12
0.82
0.56
1.18
(3.0)
(20.9)
(14.2)
(30.0)
0.20
1.77
(5.1)
(45.0)
0.45
(11.4)
Tube Supports
Mounting Rail and Rail Nuts Mounting Option
Rail nuts can be added or removed anywhere along the
rail span.
Neoprene cap holds nuts and support body in place.
Two rail nuts are required for single support kits;
one rail nut is required for twin support kits.
To order, select a support kit ordering number.
1.12
Example: 304-S1-PP-4T
(28.4)
0.44
(11.2)
Then, select a mounting rail ordering number.
Example: 303-S0-R-3.3
0.08
Then, select the corresponding (fractional or metric) rail nut
ordering number.
(2.0)
Example: 2 pc SS-S0-RN
Mounting Rail Ordering Information
Length, ft (m)
Ordering Number
3.3 (1)
303-S0-R-3.3
6.6 (2)
303-S0-R-6.6
Rail Nuts Ordering Information
Group
Ordering Number
Fractional
Metric
Single (two nuts required)
All
SS-S0-RN
SS-S0-RNM
Twin (one nut required)
1
SS-S0-RN
SS-S0-RNM
SS-S3T-RN
Strut Nuts Mounting Option
Strut nuts are for use on 1 5/8 in. (41.3 mm) strut rail
mounting systems.
Strut nuts can be added or removed anywhere along the
strut rail span.
0.06
(1.5)
Two strut nuts are required for single support kits;
one strut nut is required for twin.
To order, select a support kit ordering number.
Example: 304-S1-PP-4T
Then, select the corresponding (fractional or metric) strut nut
ordering number(s).
Example: 2 pc S-S0-SN
Strut Nuts Ordering Information
Group
Ordering Number
Fractional
Metric
Single (two nuts required)
All
SS-S0-SN
SS-S0-SNM
Twin (one nut required)
1
SS-S0-SN
SS-S0-SNM
SS-S3T-SN
Dimensions, in inches (millimeters), are for reference only and are subject to change.
Options
Blind Support Body (Undrilled)
Polyamide Support Body
To order, replace the tube size designator in the support kit
ordering number with BL.
A polyamide support body is available for use in temperatures
from 40 to 284F (40 to 140C). To order, replace PP with
PA in the support kit ordering number.
Example: 304-S1-PP-BL
316 Stainless Steel Hex Head Bolts
and Cover Plate
To order, replace 304 with 316 in the support kit ordering
number.
Example: 304-S1-PA-4T
316 Stainless Steel Strut Nuts
To order, replace S with SS in the strut nuts ordering number.
Example: SS-S0-SN
Example: 316-S1-PP-4T
Safe Product Selection
When selecting a product, the total system design must
be considered to ensure safe, trouble-free performance.
Function, material compatibility, adequate ratings,
proper installation, operation, and maintenance are the
responsibilities of the system designer and user.
Caution: Do not mix or interchange parts with those of
other manufacturers.
Warranty Information
Swagelok products are backed by The Swagelok Limited
Lifetime Warranty. For a copy, visit swagelok.com or contact
your authorized Swagelok representative.
SwagelokTM Swagelok Company
2003, 2005 Swagelok Company
Printed in U.S.A., MI
June 2005, R8
MS-01-109
