Stainless Steel and Mild Steel Enclosures

SX

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

9
8
7
6
5
4
3
2
1
SX
Stainless Steel and Mild Steel Enclosures

The SX range comprises 14 sizes of enclosure Earthing is accomplished by means of an

manufactured in either mild steel or stainless Internal / external earth stud fitted as standard

SX Range
steel. 11 sizes are available in depths of 140 or which can be connected to the terminal
1 200mm and 8 sizes are available in depths of
140, 200 or 300mm. The majority of the range
mounting rail or component mounting plate.
Optionally, earth studs can be fitted to
can be fitted with removable gland plates on the door and gland plates. Rail mounted
any or all of the four sides. The mild steel earth terminals or proprietary earth bars can
version (MSX) is available with a number of be fitted inside the enclosure and ABTECH
paint options (most RAL colours are available) Sales staff will be happy to advise on this.
and anti-corrosion finishes. Further advice on When fitted with a standard neoprene
surface finishes can be sought from the gasket, the enclosure is suitable for ambient
ABTECH sales office. temperatures of - 40°C to + 80°C. Alternatively,
when fitted with an optional silicone gasket the
temperature range is increased to - 70°C to to
+ 130°C.

The SX range of enclosures are suitable for

use in hazardous areas and can be supplied
with a number of certificates. ATEX EEx‘e’ to
BS EN 50019 (Zone 1 & 2) EEx‘nA’ to BS
EN50021 (Zone 2) and NEMA 4X (CSA, UL &
FM class 1, div 2) and GOST.

The stainless steel range (SSX) is

manufactured in 316 grade stainless steel to
give the maximum environmental protection.
The main body is manufactured from 2mm
thick sheet and the mounting straps and
gland plates from 3mm thick plate. Cable
entries can be drilled in the enclosure door or
sides or through the gland plates, if fitted.
Entries may also be drilled through the rear
face of the enclosure (EEx’e’ versions also.)

Another important feature of the SX range is

the hinged, lift-off door, which is held to the
enclosure by at least 4 captive stainless steel
screws, which also maintain the correct
compression on the gasket. The hinges are
solid block, machined oversize to enable the
screws to control the closing of the door, not The SX range can be supplied fitted with any
the hinge, its only function being to support the component approved terminal to apparatus
door when opened. The hinges allow easy level or can be supplied empty as component
removal of the door with only minimal opening approved for the clients own certification
required before removal (less than 10°). requirements.

8
 SX
Stainless Steel and Mild Steel Enclosures

The SX range was specifically designed to

meet the rigours of the North Sea environment

SX Range
and is capable of achieving IP66 and IP67. It
has also undergone and passed the Shell/ERA
deluge test which was devised to adequately 1
test enclosures and electrical equipment which
is routinely subjected to ships deck conditions
or fire deluge systems.

BPG Range
IP68 enclosures are also available for depths
up to 120 ft to special order. Further 2
information on submersible enclosures is
available in Section 8 of this catalogue.

BPGA Range
3
Other applications include junction boxes, both
industrial and hazardous area, OEM

ZAG Range
applications, fire protection systems, tunnel
wiring, IP68 applications, etc. 4

High Voltage
SX Range Features
5
• Wide Operating Temperature
(- 70°C to + 130°C)

Fire Rated
• Ingress Protection up to IP68 6
• Fire Resistant to IEC331

The SX range has many features which lend • Impact Resistant > 10 Nm

ZP Range
itself to a wide variety applications, not least of
which is the ability to be constructed to almost • Corrosion Resistant 7
any dimension due to its fabricated nature. This
can also be applied to EEx‘e’ enclosures • Gland plates can be fitted to any or all
where the certification allows oversize four sides (size SX0 and above)
enclosures to be manufactured whilst retaining

Specials
the next smallest sized enclosure’s power • Certification for use in Zone 1 and 2
rating. 8
• UL, CSA, ATEX and GOST Approvals
The SX range is also suitable for fire resistance
applications and when fitted with ceramic • Ideal for Petrochemical and Marine
terminals meets the requirements of IEC 331 applications
Technical

(750°C for 3 hours) and also BS6387/1983

(950°C for 3 hours). Further details are
available in Section 6 of this catalogue.
9

9
SX
Stainless Steel and Mild Steel Enclosures

Accessories and Options

SX Range
The following table is a list of the available accessories suitable for particular standard sizes of SX
1 enclosures. Care should be taken when ordering accessories for use with enclosures intended for
hazardous areas to ensure that compliance with certification is retained.

EP – Electro-polished external

LB - Label Bracket Welded to

ES - Earth Stud fitted to Door

TP - Tamper Proof Lid Fixing

Plate (Steel /Stainless Steel)

MP - Component Mounting
EB - Internal Earthing Bar
Part Number (see note 1)

Height (mm) (see note 2)

surfaces (SX range only)

Depth (mm) (see note 2)
Width (mm) (see note 2)

(on any or all four sides)

SIL - Silicone Gasket

RF – RFI Protection
BD - Breather Drain
and Gland Plates
140mm Depth

200mm Depth

300mm Depth

Gland Plates

(see note 3)

(see note 4)

(see note 5)
Screws
Door
SX45 114 114 51 8 8 8 8 9 9 8 8 9 9 9 9 9
SX64 102 152 63 8 8 8 8 9 9 8 8 9 9 9 9 9
SX66 152 152 102 8 8 8 9 9 9 9 9 9 9 9 9 9
SX0 152 229 - 9 9 8 9 9 9 9 9 9 9 9 9 9
SX0.5 184 274 - 9 9 8 9 9 9 9 9 9 9 9 9 9
SX1 234 324 - 9 9 8 9 9 9 9 9 9 9 9 9 9
SX1.5 306 306 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX2 372 324 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX3 372 448 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX4 372 510 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX5 510 510 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX6 510 780 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX7 650 950 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX8 800 1250 - 9 9 9 9 9 9 9 9 9 9 9 9 9

Ordering Example;
SX1.5 300 4GP LB EB
(Stainless Steel SX1.5 300mm deep, 4 gland plates, label bracket on door and internal earthing bar)

1. The range is available either in stainless steel 316 (SX variants) or mild steel (MSX variants).
2. Manufacturing tolerances are +/- 3mm on overall dimensions and +/-0.5mm on fixing hole centres.
3. Silicone gasket increases temperature rating (-70º to +130º C) and may increase working life in some applications.
4. Breather drain available in IP66 stainless steel or plastic.
5. Radio Frequency Interference (RFI) gasket may reduce IP rating.

10
 SX
Stainless Steel and Mild Steel Enclosures

SX Range
1

BPG Range
2

BPGA Range
Full width, full height Gland Plates
(can be fitted to any or all sides)
Earth Stud fitted to door and gland plates 3

ZAG Range
4

High Voltage
5

Fire Rated
Label Bracket
(welded to door)
Electro-polished
(external surfaces on SX range only) 6

ZP Range
7

Specials
Technical 8

Internal Earthing bar

(can be fitted with clamps)
Component Mounting Plate
(steel or stainless steel 316) 9

11
 1

12
SX

SX Range

MSX 45 / SSX 45 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 45 / SSX 45 Specifications Terminal Populations Entry Matrix
Width 114mm Maximum Number of Rows 1 Entry Size Side A-C Side B-D
Weidmuller Wago M16 4 4
Length 114mm
SAK 2.5 7 280-992 8 M20 2 2
Depth 51mm
SAK 4 7 280-999 0 M25 2 2
Mild steel M32 0 0
Material SAK 6 5 281-691 7
Stainless steel 316 (1.4404) M40 0 0
SAK 10 * 4 281-992 7
Weight 1200g SAK 16 * 3 281-993 0 Drilling Envelope
Side A-C 114 x 51mm
IP Rating 66 or 67 SAK 35 0 282-691 0
Side B-D 114 x 51mm
SAK 70 0 284-691 0
-40º to 80º C
(standard neoprene gasket) 283-691 0
Temperature
-70º to 130º C 285-691 0
(silicone gasket)
280-998 8
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 0
ATEX EEx nA (Zone 2)
264-120 7
BS EN 60079-15
ATEX EEx nR (Zone 2) Phoenix 264-220 4 SX 45 Photo
BS EN 60079-15
UK 2.5 N 9 264-132 (2) 1
CSA - Ex e (Class 1 Zone 1 & Zone
Certification 2) UK 3 N 9 264-134 (4) 1
FM - AEx e (Class 1 Zone 1 & Zone2) UK 5 N 7 262-132 (2) 1

GOST-R Ex e (Zone 1 & Zone 2)

UK 10 N * 4 262-134 (4) 1
UK 16 N * 3
NEMA 4X (CSA, UL & FM)
(class 1 division 2) UK 35 N 0
Power Rating 8.0W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

13
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

14
SX

SX Range

MSX 64 / SSX 64 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 64 / SSX 64 Specifications Terminal Populations Entry Matrix
102mm Maximum Number of Rows 1 Entry Size Side A-C Side B-D
Width
Weidmuller Wago M16 6 8
Length 152mm
SAK 2.5 15 280-992 18 M20 3 4
Depth 63mm
SAK 4 15 280-999 0 M25 2 3
Mild steel M32 1 2
Material SAK 6 11 281-691 15
Stainless steel 316 (1.4404) M40 0 0
SAK 10 * 9 281-992 15
Weight 1500g SAK 16 * 0 281-993 0 Drilling Envelope
Side A-C 102 x 63mm
IP Rating 66 or 67 SAK 35 0 282-691 0
Side B-D 152 x 63mm
SAK 70 0 284-691 0
-40º to 80º C
(standard neoprene gasket) 283-691 0
Temperature
-70º to 130º C 285-691 0
(silicone gasket)
280-998 18
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 15
ATEX EEx nA (Zone 2)
264-120 15
BS EN 60079-15
ATEX EEx nR (Zone 2) Phoenix 264-220 9 SX 64 Photo
BS EN 60079-15
UK 2.5 N 17 264-132 (2) 3
Certification CSA - Ex e (Class 1 Zone 1 & Zone
2) UK 3 N 17 264-134 (4) 2
FM - AEx e (Class 1 Zone 1 & Zone2) UK 5 N 15 262-132 (2) 3

GOST-R Ex e (Zone 1 & Zone 2)

UK 10 N * 9 262-134 (4) 2
UK 16 N * 7
NEMA 4X (CSA, UL & FM)
(class 1 division 2) UK 35 N 0
Power Rating 10.258W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

15
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

16
SX

SX Range

MSX 66 / SSX 66 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 66 / SSX 66 Specifications Terminal Populations Entry Matrix
152mm Maximum Number of Rows 1 Entry Size Side A-C Side B-D
Width
Weidmuller Wago M16 14 14
Length 152mm
SAK 2.5 15 280-992 18 M20 8 8
Depth 102mm
SAK 4 15 280-999 18 M25 6 6
Mild steel M32 3 3
Material SAK 6 11 281-691 15
Stainless steel 316 (1.4404) M40 2 2
SAK 10 * 9 281-992 15
Weight 2200g SAK 16 * 7 281-993 15 Drilling Envelope
Side A-C 152 x 102mm
IP Rating 66 or 67 SAK 35 * 6 282-691 11
Side B-D 152 x 102mm
SAK 70 0 284-691 10
-40º to 80º C
(standard neoprene gasket) 283-691 7
Temperature
-70º to 130º C 285-691 0
(silicone gasket) .
280-998 18
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 15
ATEX EEx nA (Zone 2) 264-120 16
BS EN 60079-15
ATEX EEx nR (Zone 2) Phoenix 264-220 10 SX 66 Photo
BS EN 60079-15
UK 2.5 N 17 264-132 (2) 3
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 17 264-134 (4) 2
FM - AEx e (Class 1 Zone 1 & Zone2) UK 5 N 14 262-132 (2) 3

GOST-R Ex e (Zone 1 & Zone 2)

UK 10 N * 9 262-134 (4) 2
UK 16 N * 7
NEMA 4X (CSA, UL & FM)
(class 1 division 2) UK 35 N * 6
Power Rating 14.287W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

17
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

18
SX

SX Range

MSX 0 / SSX 0 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 0 / SSX 0 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 1 Entry Size Side A-C Side B-D
Width 152mm
Weidmuller Wago M16 5 9
Length 229mm
SAK 2.5 21 280-992 24 M20 3 6
Depth 140mm or 200mm
SAK 4 19 280-999 24 M25 2 3
Mild steel M32 1 2
Material SAK 6 16 281-691 20
Stainless steel 316 (1.4404) M40 1 2
SAK 10 * 12 281-992 20
140mm deep 200mm deep
Weight 2200g 4000g SAK 16 * 10 281-993 20 Drilling Envelope
Side A-C 87 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 * 7 282-691 * 15
Side B-D 144 x 75mm (4 x gp 140)
SAK 70 * 5 284-691 * 12
-40º to 80º C
(standard neoprene gasket) 283-691 0
Temperature
-70º to 130º C 285-691 0
(silicone gasket)
280-998 24
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 20
ATEX EEx nA (Zone 2)
264-120 21
BS EN 60079-15
ATEX EEx nR (Zone 2) Phoenix 264-220 12 SX 0 Photo
BS EN 60079-15
UK 2.5 N 25 264-132 (2) 4
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 25 264-134 (4) 3
FM - AEx e (Class 1 Zone 1 & Zone2) UK 5 N 21 262-132 (2) 4

GOST-R Ex e (Zone 1 & Zone 2)

UK 10 N * 12 262-134 (4) 3
UK 16 N * 10
NEMA 4X (CSA, UL & FM)
(class 1 division 2) UK 35 N * 8
Power Rating 19.874W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

19
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

20
SX

SX Range

MSX 0.5 / SSX 0.5 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 0.5 / SSX 0.5 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 2 Entry Size Side A-C Side B-D
Width 184mm
Weidmuller Wago M16 7 12
Length 274mm
SAK 2.5 56 280-992 31 M20 4 8
Depth 140mm or 200mm
SAK 4 52 280-999 31 M25 2 4
Mild steel M32 2 3
Material SAK 6 42 281-691 27
Stainless steel 316 (1.4404) M40 1 2
SAK 10 * 34 281-992 27
140mm deep 200mm deep
Weight 5000g 6000g SAK 16 * 14 281-993 27 Drilling Envelope
Side A-C 119 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 * 10 282-691 * 21
Side B-D 189 x 75mm (4 x gp 140)
SAK 70 * 7 284-691 * 16
-40º to 80º C
(standard neoprene gasket) 283-691 28
Temperature
-70º to 130º C 285-691 0
(silicone gasket)
280-998 31
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 27
ATEX EEx nA (Zone 2)
264-120 56
BS EN 60079-15
ATEX EEx nR (Zone 2) Phoenix 264-220 32 SX 0.5 Photo
BS EN 60079-15
UK 2.5 N 68 264-132 (2) 12
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 68 264-134 (4) 8
FM - AEx e (Class 1 Zone 1 & Zone2) UK 5 N 56 262-132 (2) 12

GOST-R Ex e (Zone 1 & Zone 2)

UK 10 N * 34 262-134 (4) 8
UK 16 N * 14
NEMA 4X (CSA, UL & FM)
(class 1 division 2) UK 35 N * 11
Power Rating 19.874W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

21
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

22
SX

SX Range

MSX 1 / SSX 1 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 1 / SSX 1 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 2 Entry Size Side A-C Side B-D
Width 234mm
Weidmuller Wago M16 10 14
Length 324mm
SAK 2.5 72 280-992 41 M20 7 10
Depth 140mm or 200mm
SAK 4 66 280-999 41 M25 4 6
Mild steel M32 2 4
Material SAK 6 54 281-691 34
Stainless steel 316 (1.4404) M40 2 3
SAK 10 * 44 281-992 34
140mm deep 200mm deep
Weight 6300g 7200g SAK 16 * 18 281-993 34 Drilling Envelope
Side A-C 169 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 * 14 282-691 27
Side B-D 239 x 75mm (4 x gp 140)
SAK 70 * 10 284-691 * 21
-40º to 80º C
(standard neoprene gasket) 283-691 * 18
Temperature
-70º to 130º C 285-691 * 12
(silicone gasket)
280-998 41
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 34
ATEX EEx nA (Zone 2)
264-120 72
BS EN 60079-15
ATEX EEx nR (Zone 2) Phoenix 264-220 42 SX 1 Photo
BS EN 60079-15
UK 2.5 N 86 264-132 (2) 14
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 86 264-134 (4) 10
FM - AEx e (Class 1 Zone 1 & Zone2) UK 5 N 72 262-132 (2) 14

GOST-R Ex e (Zone 1 & Zone 2)

UK 10 N * 44 262-134 (4) 10
UK 16 N * 18
NEMA 4X (CSA, UL & FM)
(class 1 division 2) UK 35 N * 14
Power Rating 29.206W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

23
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

24
SX

SX Range

MSX 1.5 / SSX 1.5 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 1.5 / SSX 1.5 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 3 Entry Size Side A-C Side B-D
Width 306mm
Weidmuller Wago M16 14 12
Length 306mm
SAK 2.5 99 280-992 74 M20 10 10
Depth 140mm or 200mm
SAK 4 93 280-999 74 M25 6 5
Mild steel M32 4 3
Material SAK 6 75 281-691 64
Stainless steel 316 (1.4404) M40 3 3
SAK 10 * 60 281-992 64
140mm deep 200mm deep
Weight 7300g 8800g SAK 16 * 34 281-993 64 Drilling Envelope
Side A-C 241 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 * 24 282-691 48
Side B-D 221x 75mm (4 x gp 140)
SAK 70 * 20 284-691 * 38
-40º to 80º C
(standard neoprene gasket) 283-691 * 32
Temperature
-70º to 130º C 285-691 * 11
(silicone gasket)
280-998 74
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 64
ATEX EEx nA (Zone 2)
264-120 99
BS EN 60079-15
ATEX EEx nR (Zone 2) Phoenix 264-220 60 SX 1.5 Photo
BS EN 60079-15
UK 2.5 N 120 264-132 (2) 21
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 120 264-134 (4) 15
FM - AEx e (Class 1 Zone 1 & Zone2) UK 5 N 99 262-132 (2) 21

GOST-R Ex e (Zone 1 & Zone 2)

UK 10 N * 60 262-134 (4) 15
UK 16 N * 34
NEMA 4X (CSA, UL & FM)
(class 1 division 2) UK 35 N * 26
Power Rating 32.284W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

25
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

26
SX

SX Range

MSX 2 / SSX 2 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 2 / SSX 2 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 3 Entry Size Side A-C Side B-D
Width 372mm
M16 18 14
Length 324mm Weidmuller Wago
M20 14 10
SAK 2.5 132 280-992 150
Depth 140mm or 200mm
M25 7 6
SAK 4 123 280-999 150
Mild steel M32 5 4
Material SAK 6 99 281-691 126
Stainless steel 316 (1.4404) M40 4 3
SAK 10 78 281-992 126
140mm deep 200mm deep
Weight 9.5Kg 11.3Kg
Drilling Envelope
SAK 16 66 281-993 84
Side A-C 307 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 42 282-691 99 Side B-D 239x 75mm (4 x gp 140)
-40º to 80º C SAK 70 24 284-691 * 78
(standard neoprene gasket)
283-691 * 44
Temperature
-70º to 130º C 285-691 * 30
(silicone gasket)
280-998 150
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 126
ATEX EEx nA (Zone 2)
BS EN 60079-15 264-120 132
ATEX EEx nR (Zone 2) Phoenix 264-220 78 SX 2 Photo
BS EN 60079-15
UK 2.5 N 156 264-132 (2) 27
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 156 264-134 (4) 18
FM - AEx e (Class 1 Zone 1 & Zone2)
UK 5 N 132 262-132 (2) 27

GOST-R Ex e (Zone 1 & Zone 2) UK 10 N 78 262-134 (4) 18

NEMA 4X (CSA, UL & FM) UK 16 N 66

(class 1 division 2)
UK 35 N 54
Power Rating 36.500W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

27
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

28
SX

SX Range

MSX 3 / SSX 3 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 3 / SSX 3 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 3 Entry Size Side A-C Side B-D
Width 372mm
M16 18 20
Length 448mm Weidmuller Wago
M20 14 16
SAK 2.5 168 280-992 189
Depth 140mm or 200mm
M25 7 9
SAK 4 156 280-999 189
Mild steel M32 5 6
Material SAK 6 126 281-691 162
Stainless steel 316 (1.4404) M40 4 5
SAK 10 * 102 281-992 162
140mm deep 200mm deep
Weight 11.3Kg 13.3Kg
Drilling Envelope
SAK 16 * 84 281-993 108
Side A-C 307 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 * 63 282-691 126 Side B-D 363 x 75mm (4 x gp 140)
-40º to 80º C SAK 70 * 45 284-691 * 99
(standard neoprene gasket)
Temperature 283-691 * 56
-70º to 130º C 285-691 * 38
(silicone gasket)
280-998 189
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 162
ATEX EEx nA (Zone 2)
BS EN 60079-15 264-120 168
ATEX EEx nR (Zone 2) Phoenix 264-220 99 SX 3 Photo
BS EN 60079-15
UK 2.5 N 201 264-132 (2) 36
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 201 264-134 (4) 24
FM - AEx e (Class 1 Zone 1 & Zone2)
UK 5 N 168 262-132 (2) 36

GOST-R Ex e (Zone 1 & Zone 2) UK 10 N * 102 262-134 (4) 24

NEMA 4X (CSA, UL & FM) UK 16 N * 84

(class 1 division 2)
UK 35 N * 69
Power Rating 42.289W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

29
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

30
SX

SX Range

MSX 4 / SSX 4 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 4 / SSX 4 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 3 Entry Size Side A-C Side B-D
Width 372mm
M16 18 24
Length 510mm Weidmuller Wago
M20 14 20
SAK 2.5 198 280-992 222
Depth 140mm or 200mm
M25 7 10
SAK 4 183 280-999 222
Mild steel M32 5 7
Material SAK 6 150 281-691 189
Stainless steel 316 (1.4404) M40 4 6
SAK 10 120 281-992 189
140mm deep 200mm deep
Weight 12.7Kg 14.8Kg
Drilling Envelope
SAK 16 99 281-993 126
Side A-C 307 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 75 282-691 147 Side B-D 425 x 75mm (4 x gp 140)
-40º to 80º C SAK 70 54 284-691 117
(standard neoprene gasket)
283-691 66
Temperature
-70º to 130º C 285-691 44
(silicone gasket)
280-998 222
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 189
ATEX EEx nA (Zone 2)
BS EN 60079-15 264-120 198
ATEX EEx nR (Zone 2) Phoenix 264-220 117 SX 4 Photo
BS EN 60079-15
UK 2.5 N 237 264-132 (2) 42
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 237 264-134 (4) 30
FM - AEx e (Class 1 Zone 1 & Zone2)
UK 5 N 198 262-132 (2) 42

GOST-R Ex e (Zone 1 & Zone 2) UK 10 N 102 262-134 (4) 30

NEMA 4X (CSA, UL & FM) UK 16 N 99

(class 1 division 2)
UK 35 N 81
Power Rating 44.726W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

31
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

32
SX

SX Range

MSX 5 / SSX 5 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 5 / SSX 5 Specifications Terminal Populations Entry Matrix
Entry Size Side A-C Side B-D
Width 510mm Maximum Number of Rows 4
M16 26 24
Length 510mm Weidmuller Wago
M20 20 20
SAK 2.5 264 280-992 296
Depth 140mm or 200mm M25 10 10
SAK 4 244 280-999 296
Mild steel M32 7 7
Material SAK 6 200 281-691 252
Stainless steel 316 (1.4404) M40 6 6
SAK 10 160 281-992 252
140mm deep 200mm deep Drilling Envelope
Weight 17.0Kg 20.0Kg SAK 16 132 281-993 189
Side A-C 445 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 100 282-691 196 Side B-D 425 x 75mm (4 x gp 140)
-40º to 80º C SAK 70 72 284-691 156
(standard neoprene gasket)
283-691 99
Temperature
-70º to 130º C 285-691 66
(silicone gasket)
280-998 296
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 252
ATEX EEx nA (Zone 2)
BS EN 60079-15 264-120 264
ATEX EEx nR (Zone 2) Phoenix 264-220 156 SX 5 Photo
BS EN 60079-15
UK 2.5 N 316 264-132 (2) 56
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 316 264-134 (4) 40
FM - AEx e (Class 1 Zone 1 & Zone2)
UK 5 N 264 262-132 (2) 56

GOST-R Ex e (Zone 1 & Zone 2) UK 10 N 160 262-134 (4) 40

NEMA 4X (CSA, UL & FM) UK 16 N 132

(class 1 division 2)
UK 35 N 108
Power Rating 50.328W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

33
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

34
SX

SX Range

MSX 6 / SSX 6 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 6 / SSX 6 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 4 Entry Size Side A-C Side B-D
Width 510mm
M16 26 40
Length 780mm Weidmuller Wago
M20 20 34
SAK 2.5 440 280-992 496
Depth 140mm or 200mm or 300mm
M25 11 18
SAK 4 404 280-999 496
Mild steel M32 7 11
Material SAK 6 332 281-691 424
Stainless steel 316 (1.4404) M40 6 9
SAK 10 264 281-992 424
140mm 200mm 300mm
Weight 24.0Kg 27.0Kg 32.0Kg
Drilling Envelope
SAK 16 220 281-993 318
Side A-C 445 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 168 282-691 328 Side B-D 695 x 75mm (4 x gp 140)
-40º to 80º C SAK 70 120 284-691 264
(standard neoprene gasket)
Temperature 283-691 165
-70º to 130º C 285-691 114
(silicone gasket)
280-998 496
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 424
ATEX EEx nA (Zone 2)
BS EN 60079-15 264-120 440
ATEX EEx nR (Zone 2) Phoenix 264-220 264 SX 6 Photo
BS EN 60079-15
UK 2.5 N 524 264-132 (2) 92
Certification CSA - Ex e (Class 1 Zone 1 & Zone 2)
UK 3 N 524 264-134 (4) 64
FM - AEx e (Class 1 Zone 1 & Zone2)
UK 5 N 440 262-132 (2) 92

GOST-R Ex e (Zone 1 & Zone 2) UK 10 N 264 262-134 (4) 64

NEMA 4X (CSA, UL & FM) UK 16 N 229

(class 1 division 2)
UK 35 N 176
Power Rating 57.383W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

35
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

36
SX

SX Range

MSX 7 / SSX 7 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 7 / SSX 7 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 5 Entry Size Side A-C Side B-D
Width 650mm
M16 34 81
Length 950mm Weidmuller Wago
M20 28 60
SAK 2.5 685 280-992 775
Depth 140mm or 200mm or 300mm
M25 13 39
SAK 4 635 280-999 775
Mild steel M32 10 28
Material SAK 6 520 281-691 660
Stainless steel 316 (1.4404) M40 8 16
SAK 10 415 281-992 660
140mm 200mm 300mm
Weight 35.0Kg 39.0Kg 52.0Kg
Drilling Envelope
SAK 16 345 281-993 528
Side A-C 585 x 75mm (4 x gp 140)
IP Rating 66 or 67 SAK 35 260 282-691 510 Side B-D 865 x 75mm (4 x gp 140)
-40º to 80º C SAK 70 150 284-691 410
(standard neoprene gasket)
283-691 272
Temperature
-70º to 130º C 285-691 188
(silicone gasket)
280-998 775
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 660
ATEX EEx nA (Zone 2)
BS EN 60079-15 264-120 685
ATEX EEx nR (Zone 2) Phoenix 264-220 410 SX 7 Photo
BS EN 60079-15
UK 2.5 N 820 264-132 (2) 145
Certification CSA - Ex e (Class 1 Zone 1 & Zone
2) UK 3 N 820 264-134 (4) 100
FM - AEx e (Class 1 Zone 1 & Zone2)
UK 5 N 685 262-132 (2) 145

GOST-R Ex e (Zone 1 & Zone 2) UK 10 N 415 262-134 (4) 100

NEMA 4X (CSA, UL & FM) UK 16 N 345

(class 1 division 2)
UK 35 N 280
Power Rating 68.000W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

37
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
 1

38
SX

SX Range

MSX 8 / SSX 8 Drawing

Stainless Steel and Mild Steel Enclosures

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
 MSX 8 / SSX 8 Specifications Terminal Populations Entry Matrix
Maximum Number of Rows 5 Entry Size Side A-C Side B-D
Width 800mm
M16 42 66
Length 1250mm Weidmuller Wago
M20 36 58
SAK 2.5 1295 280-992 775
Depth 140mm or 200mm or 300mm
M25 18 30
SAK 4 635 280-999 775
Mild steel M32 12 20
Material SAK 6 520 281-691 660
Stainless steel 316 (1.4404) M40 10 17
SAK 10 415 281-992 660
140mm 200mm 300mm
Weight 40.0Kg 52.0Kg 59.0Kg
Drilling Envelope
SAK 16 345 281-993 528
Side A-C 735 x 75mm
IP Rating 66 or 67 SAK 35 260 282-691 510 Side B-D 1165 x 75mm
-40º to 80º C SAK 70 150 284-691 410
(standard neoprene gasket)
283-691 272
Temperature
-70º to 130º C 285-691 188
(silicone gasket)
280-998 775
ATEX EEx e (Zone 1 & Zone 2)
BS EN 60079-7 281-998 660
ATEX EEx nA (Zone 2)
BS EN 60079-15 264-120 685
ATEX EEx nR (Zone 2) Phoenix 264-220 410 SX 8 Photo
BS EN 60079-15
UK 2.5 N 820 264-132 (2) 145
Certification CSA - Ex e (Class 1 Zone 1 & Zone
2) UK 3 N 820 264-134 (4) 100
FM - AEx e (Class 1 Zone 1 & Zone2)
UK 5 N 685 262-132 (2) 145

GOST-R Ex e (Zone 1 & Zone 2) UK 10 N 415 262-134 (4) 100

NEMA 4X (CSA, UL & FM) UK 16 N 345

(class 1 division 2)
UK 35 N 280
Power Rating 119.462W * Care must be taken to ensure that the size of this
enclosure can accommodate the cable bending radius.

Technical Specials ZP Range Fire Rated High Voltage ZAG Range BPGA Range BPG Range SX Range

39
9
8
7
6
5
4
3
2
1
Stainless Steel and Mild Steel Enclosures
SX
SX
Stainless Steel and Mild Steel Enclosures

SX Range
1

40