TurfPave
HD
Grass Paver
TurfPave HD is used in the construction of grass access pathways for emergency
vehicles and stabilisation of areas such as overflow parking, residential driveways, golf
buggy and equestrian dressage arenas and paths, and pleasure craft parking ramps.
It also serves as a slope stabilisation and erosion control measure.
035-005
find it on ecospecifier.com
About TurfPave HD
TurfPave HD is a structural module designed with sufficient depth to contain and
stabilise grass. It is engineered to withstand loads in areas subjected to pedestrian and
occasional vehicular traffic. TurfPave HD replaces asphalt or concrete to create
permeable surfaces and enable these areas to blend into the aesthetics of their
surroundings.
TurfPave HD consists of a network of porous cells which
protect grass roots against compaction. The openings
at the base and side allow roots and plant runners
to spread freely to establish vigorous root
development to encourage healthy plant
growth.
TurfPave HD modules interlock ensuring that
they remain in place during and after installation. The
connections between cells allow assembled panels to flex and
conform to undulating terrain.
TurfPave HD is suitable for use as a permeable surface in stormwater
management systems as it allows rain water to percolate through the in-fill
and infiltrate into the base course below. This process serves to filter pollutants
from stormwater at source and prevents water logging. Concrete or asphalt surfaces
are impervious surfaces and do not allow infiltration thereby contributing to the Urban Heat
Island Effect (UHIE).
*
TurfPave HD is made from 100% recycled materials and supports Green Building Certification.
Applications
Pathway for light emergency vehicles
Pedestrian pathways
Street shoulder parking areas
Golf cart path
Racetrack infields and pit areas
Fire Engine Access
Advantages
Reduces erosion and soil migration
Easily installed and removed
Conform to uneven surfaces
Does not hinder root and runner growth
Stacking ability reduces storage and transport cost
Supports Green Building certification
Enhancing the Urban Experience
Technical Specification
Material Recycled Polypropylene
Dimensions 500mm x 500mm
Height
35mm
Weight ~2.3 kg/m2
Compressive Strength (filled)
~2000 t/m2
Service Temperature
-30 C to 80 C
Biological Resistance
Chemical Resistance
Unaffected by moulds and algae
Resistant to rot, oils, acids, alkalis, bitumen
and naturally occurring soil chemicals
TurfPave HD has been tested* in accordance with ASTM
D695-08 to withstand compressive exceeding 2000 t/m2
(4267psi) and exceeds typical load requirements of vehicles,
namely:
Passenger vehicle
up to 28 t/m2 (40 psi)
Light goods van
up to 42 t/m2 (60 psi)
Fire engine /
Container truck
up to 77 t/m2 (110 psi)
SCDF CP 2002
80 t/m2 (113 psi)
* at Singapore Test Services Pte Ltd
TurfPave HD Build-Up
Turfing
35mm thick TurfPave
with soil and sand mix
HD
Leveling Sand (if required)
Compacted Hardcore / Crusher Run
Compacted Sub-Base
Distributed by:
Note: The information provided in this brochure is based on current knowledge and experience and does not infer any legally binding assurance or warranty, expressed or implied. Intending purchasers should
verify whether any changes to specifications or applications or otherwise have been made since the issue of this literature. Environmental-friendly recycled materials are used wherever possible and physical
product properties including colour may differ due to source of raw materials used. Colour may also fade due to UV exposure. All components of the product are designed for specific application, design
calculations and any variation and/or deviation therefrom shall be the responsibility of the Specifier and/or User.
ELMICH PTE LTD www.elmich.com
Singapore: (+65) 6356 2800
info@elmich.com
Singapore | Seattle | Sydney | Zurich | Guangzhou | Shanghai
Strategic
Partner
Member
Elmich Pte Ltd
LE-TPHD042013SG
