67 (80)
7849 3655 - B-24-10-2005 SR-CC-FL
QUASAR NV
TECHNICAL DATA
TECHNICAL DATA
Technical Specification
9-601 S-F
QUASAR NV
2003-02-03
APPLICATION
MAIN SPECIFICATIONS
The Tamrock Quasar NV is a compact and versatile
single boom electro hydraulic jumbo for development,
bolting and/or production in narrow vein mining.
Carrier
Rock drill
Boom
Feed
Length
Width
Height
The unique muti-purpose boom have a large optimum
shaped coverage. A double rotation device allows a
vertical positioning on both side and the possibility to
drill extremely close to the hanging and foot walls, both
the the right and left.
The jumbo layout is designed for good visibility and
balance, this and the powerful four-wheel-drive
articulated carrier ensure fast and safe manoeuvering in
small drifts.
The high performance drilling system allows high drilling
performance with good drill steel economy and high
machine reliability.
roof down
roof up
Turning radius
Tramming speed
13%=1;7=8
Gradeability, maxi
Noise level
Weight
1 x Quasar
1 x X 2 NV
1 x B 14 NV
1 x NVF
8 470 mm
1 200 mm
1 850 mm
2 750 mm
5 100 / 3 400 mm
6.5 kph
4 kph
35 %
< 98 dB(A)
8 650 kg
The operator environment and added automatic
functions allow the operator to concentrate on safe, fast
and accurate drilling.
All the service points are well protected but easy to
access.
1/4
SANDVIK TAMROCK SECOMA S.A.S.
19 avenue De Lattre-de-Tassigny - ZI
B.P. 46 - 69881 MEYZIEU Cedex
Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
68 (80)
QUASAR NV
TECHNICAL DATA
ESPECIFICACIONES TECNICAS
6-601 S-F
QUASAR NV
2003-02-03
DIMENSIONES GENERALES
900
1850
1650
1300
220
Overall length 8470
150
1195
1000
1910
4735
All dimensions in mm
ROCK DRILL(MARTILLO) (Technical specification 2-310 S)
DRILLING ALTERNATIVES
Model
Standard male shank
Weight
Impact frequency
Percussion pressure
Impact power
FEED (VIGA DE AVANCE) (Technical specification 3-400 S)
Equipment for long hole function :
- Specific hydraulic components
(back pressure compensator, screwing/unscrewing..)
- Hydraulic stinger on drill feed + controls.
- Front clamping centralizer on drill feed + controls.
Equipment for remote control :
- Electro-valves for remote control implementation.
- Water-proofed electric remote control relay cabinet.
Model
Drill steel
HYDRAULIC CONTROL SYSTEM
X 2 NV
R 32 - R 38 - T 38
135 kg
57 - 59 Hz
175 - 210 bar
15 - 19 kW
NVF
H 25 till H 35 - 39
FEED ALTERNATIVE
Model
Type
Steel length
Drill steel
BOOM(BRAZO)
Model
Type
Weight (with hoses)
Feed roll-over
Feed angle
Boom extension
Feed extension
(Technical specification 3-401 S)
NVTF
Telescopic
6/10 ft
H 25 till H 35 - 39
(Technical specification 4-500 S)
Type
Control functions
IBCQNV
Auto smooth collaring
Precise anti-jamming
Only 1 control lever for thrust/percussion
(full & half)
ELECTRO HYDRAULIC POWER PACK
Electrical motor
Hydraulic pump type
B 14 NV
Universal
1 200 kg
360
95
800 mm
1 400 mm
45 kW (60hp)
Radial piston
Desplazamiento fijo
2/4
SANDVIK TAMROCK SECOMA S.A.S.
19 avenue De Lattre-de-Tassigny - ZI
B.P. 46 - 69881 MEYZIEU Cedex
Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
69 (80)
7849 3655 - B-24-10-2005 SR-CC-FL
QUASAR NV
TECHNICAL DATA
ESPECIFICACIONES TECNICAS
6-601 S-F
QUASAR NV
2003-02-03
TRAMMING DIMENSIONS (DIMENSIONES DE DESPLAZAMIENTO)
1850
1650
220
Overall length 8470
1195
1910
4735
TURNING RADIUS (RADIO DE GIRO)
SECCION MINIMA DE OPERACION
5100
3400
30
Outriggers
Standard
2360
2700
Narrow
2015
2100
2700
1200
A
B
All dimensions in mm
CARRIER(PORTADOR
Model
Diesel engine
- Exhaust
(Technical specification 1-100 S)
Quasar
Deutz F3L 912 W, 30 kW (41 hp)
Catalyser
Hydrostatic transmission
- One pump
- Four wheel-motor
Oscillation
Tyres
Steering
Variable displacement
Axial piston, 0-75 cm/rev
Radial piston
Rear axle, 2 x 6
10.00 x 15
Frame steering, 2 x 30
Brakes
- Service
Hydrostatic transmission
- Emergency & parking
Hydraulic oil immersed
multiple disc brakes on each wheel
Stabilizers
Safety canopy
- Lowering capability
Fuel tank
Hydraulic tank
2 hydraulic outriggers, front
Hydraulic, FOPS
900 mm
60 litre
130 litre
AIR CIRCUIT
Compressor
- Capacity
Electric motor
C.T. 1, piston type
400 l/min.at 4 bar
3 kW (4 hp)
WATER CIRCUIT (Circuito de Agua)
Water booster pump
W.B.P. 2, centrifugal
- Capacity
4000 l/h at 15 bar
- Electric motor
4 kW (5.5 hp)
Oil cooler
OC 25, water-actuated counterflow
- Cooling capacity
25 kW
ELECTRICAL SYSTEM
Total installed power
High / Low voltage
Voltage
Standard
Alternative
Frequency
Starting method
Cable reel
- Capacity
60 kW
Separate cabinets
380 - 660 V
1 000 V
50 or 60 Hz
Star / Delta
CRQ type (Technical specification 5-500 S)
80 m of cable 32 mm O.D
Lighting
- Working lights
- Tramming lights
2 x 70 W, 24 V
3 x 70 W, 24 V
(the 2 front lights are also used as working lights)
FULL DIESEL VERSION AVAILABLE
Air-cooled engine
Deutz F6L 912 W
- Max. rating at 2300 rpm
54 kW (74 hp)
Fuel tank capacity
170 litre
Compressor & water pump driven by hydraulic motors
Total machine weight
8 200 kg
3/4
SANDVIK TAMROCK SECOMA S.A.S.
19 avenue De Lattre-de-Tassigny - ZI
B.P. 46 - 69881 MEYZIEU Cedex
Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
7849 3655 - B-24-10-2005 SR-CC-FL
70 (80)
QUASAR NV
TECHNICAL DATA
ESPECIFICACIONES TECNICAS
6-601 S-F
QUASAR NV
2003-02-03
AREA DE COVERTURA
1650
5500
Perforacion de Techo
Perforacion Frontal
4750
Perforaciones
Laterales
800
4250
5200
5500
Perforacion taladros largos
Quasar NV con gatas.
Todas las dimensiones en mm
1470
OPTIONAL EQUIPMENT
DRILLING SYSTEM
CARRIER (PORTADOR)
H.A.R. Rock drill auto-return.
Drill angle measuring instrument TMS D2.
Inclinometers for long hole function.
Air flushing.
Air mist flushing kit for auxiliary water/air connection.
*) Front clamping head on drill feed.
2 rear jacks.
*) Extendable front jacks.
Fume diluter.
*) Electric oil filling pump.
Hydraulic low oil level indicator and switch.
Complete spare wheel.
*) 4 Michelin X mine D2 instead of standard types.
REMOTE CONTROL
Portable electric remote control.
One 24 V x 150 W pedestal mounted halogen light.
BRAKES
Hand pump for manual brake release.
ELECTRICAL SYSTEM
Two working ligths 24V x 150 W halogen.
*) 1 000 V electric power supply.
Ground fault detector
- not applicable to 1 000 V
Electric cable (Technical specifications 5-506 S and 5-507 S)
- 380-575 V, 4 x 25 mm, 32 mm, 80 m length
- 660-690 V, 4 x 25 mm, 32 mm, 80 m length, direct start
*) Allen Bradley electrics.
OTHER OPTIONAL EQUIPMENT
Fire suppression system ANSUL, 6 nozzles.
Reverse alarm.
*) EU, UL, CSA, AUS norms package + local standards and
regulations.
Automatic lubrication system (Lincoln) for both boom and carrier.
Central lubrication system.
Hook up for mine air network (IP5 air cleaner included).
*) Ni-Cr plated cylinder rods.
Manuals other than French/English language.
*) replaces standard component
www.tamrock.sandvik.com
Sandvik Tamrock reserve the right to change this specificationwithout further notice
SANDVIK TAMROCK SECOMA S.A., B.P. 46 - 69881 Meyzieu Cedex, France
Tel. + 33 4 7245 2200 Fax + 33 4 7831 7980
SANDVIK TAMROCK SECOMA S.A.S.
19 avenue De Lattre-de-Tassigny - ZI
B.P. 46 - 69881 MEYZIEU Cedex
Tel : (33) 472 45 22 00 Fax : (33) 478 31 79 80
4/4
